The previous commit created the two halves. This one wires the choice, so dev renders MinIO
credentials and prod renders R2 credentials from the SAME base manifests (R-ENV-02: the
overlay patch is the entire difference between environments; no base manifest is forked).
cluster-vars BACKUP_CREDENTIALS_SUFFIX base "" | dev "" | prod "-prod"
velero HelmRelease credentials.existingSecret: velero-cloud-credentials${BACKUP_CREDENTIALS_SUFFIX}
3x CNPG Cluster s3Credentials.*.name: <db>-backup-credentials${BACKUP_CREDENTIALS_SUFFIX}
ONE SUFFIX, NOT FOUR SECRET-NAME KNOBS. Four independent knobs can be updated three-quarters
of the way, leaving one consumer reading the OTHER environment's key with nothing rendering
wrong — and StrictPostBuildSubstitutions cannot catch that: strict mode fails on an UNDEFINED
variable, never on a defined-but-stale one. With one suffix the four move together or not at
all. The cost is that the rendered Secret name is not greppable from the consumer, so both
kustomizations spell the two names out in full beside the resources.
THE BASE DEFAULT IS "" AND THAT IS LOAD-BEARING. It renders the UNSUFFIXED names — objects
that exist in every render, and that dev is running today. The alternative failure mode is
strictly worse than the shared-Secret state this replaces: velero's pod hangs in
ContainerCreating forever when `existingSecret` names a missing Secret (the volume never
mounts), and a CNPG Cluster whose s3Credentials Secret is absent stops archiving WAL — which
under archive_mode=on is a filling pgdata PVC, not a missing backup. So an unresolvable
default breaks the referencing cluster HARDER than a wrong key does. Both overlays state the
value explicitly anyway, so neither inherits it silently.
Prod's overlay change is a cluster-vars op only. The velero Flux Kustomization patch is
untouched (it stays decryption-only, and velero stays suspended on prod).
VERIFIED — `kubectl kustomize --load-restrictor LoadRestrictionsNone` on clusters/dev and
clusters/prod for the cluster-vars values, then on each of the four affected tiers (platform,
platform-config, platform/velero, apps/wave-0) piped through `flux envsubst --strict` with
that environment's variables:
strict envsubst PASSES for all 8 (env x tier) combinations
dev velero existingSecret velero-cloud-credentials
dev keycloak/nextcloud/semaphore-db <db>-backup-credentials (both key refs each)
prod velero existingSecret velero-cloud-credentials-prod
prod keycloak/nextcloud/semaphore-db <db>-backup-credentials-prod (both key refs each)
both all EIGHT Secret objects present in the rendered output (dev and prod alike)
no `${...}` survives in any rendered tier except gitea's three DELIBERATE `$${...}` shell
escapes in apps/wave-0, which are pre-existing and unrelated.
Read alongside the endpoints the same overlays already set, the two environments are now
isolated on credential AND target:
dev velero s3://velero (root) + cnpg s3://cnpg @ http://192.168.1.9:9000 region us-east-1
prod velero k3s-prod-backup/velero + barman prefix @ https://<acct>.r2.cloudflarestorage.com region auto
Co-Authored-By: Claude Opus 5 <[email protected]>
The four backup-credential SOPS Secrets are SHARED BASE manifests: platform/ and apps/ are
rendered by the same Flux tiers on both clusters, and the ONLY per-environment difference in
this repo is cluster-vars substitution (R-ENV-02). So writing the R2 token into all four
(0a6a862) did not "give prod credentials" — it REPLACED DEV'S. Merging that as-is would have
handed dev's Velero and all three dev CNPG Clusters an R2 key id to sign MinIO requests with:
403 on every WAL segment, and archive_mode=on turns that into a disk-full clock on the pgdata
PVC, not a degraded backup. Dev's PROVEN DR restore (R-STATE-03) is the thing that would have
broken.
This commit splits the material. Each credential is now TWO Secret objects, both applied to
BOTH clusters, differing only in name suffix:
dev -> velero-cloud-credentials keycloak/nextcloud/semaphore-db-backup-credentials
prod -> velero-cloud-credentials-prod ...-db-backup-credentials-prod
The consumer picks one by name; that wiring is the NEXT commit, so this one changes no
rendered reference and is a no-op for both live clusters.
WHY DEV KEEPS THE UNSUFFIXED NAME. Dev is live. Renaming its Secret would change
`s3Credentials.accessKeyId.name` on three running CNPG Clusters — which projects into the
instance pods' environment and therefore ROLLS keycloak-db, nextcloud-db and semaphore-db —
and would roll the velero Deployment, all to rename an object whose contents do not change.
This repo already makes exactly this call for dev's live identifiers (EXTERNALDNS_TXT_OWNER_ID
"default", VELERO_BACKUP_PREFIX ""): the live cluster keeps the name it is running, and the
NEW environment takes the new one. The asymmetry is deliberate and documented at each
kustomization.
WHERE THE MATERIAL CAME FROM. Neither side is invented:
- the four unsuffixed files are restored byte-for-byte from `main` (the MinIO material as
it stood before 0a6a862), so dev's Secrets are IDENTICAL to what dev is running;
- the four `-prod` files carry the R2 token from 0a6a862 (already on this branch as
9739e9b), re-encrypted only because metadata.name changed.
RE-ENCRYPTION, AND WHY A COPY+SED IS NOT ENOUGH. `.sops.yaml` sets
`encrypted_regex: ^(data|stringData)$`, so metadata.name stays cleartext — but SOPS MACs the
WHOLE document (there is no `mac_only_encrypted` here), so editing that cleartext line
invalidates the MAC and `sops -d` then refuses the file. The `-prod` files were therefore
produced inside the dev toolbox (infra/devcontainer, which has sops 3.9.4 and the age key
mounted) by decrypt -> rename -> re-encrypt, with the plaintext never leaving a container
tmpfile. Note for the next person: `sops -e --output NEW OLD` matches creation rules against
the INPUT path, so encrypting a tmpfile into a repo path needs `--filename-override NEW` or
it dies with "no matching creation rules found".
Verified: all eight files `sops -d` cleanly; the four dev files hash to dev's material and the
four prod files to R2's, and the two sets differ. `.sops.yaml` needed no new rule — the
existing `(platform|apps|catalog)/.*(secret|sops)\.ya?ml$` rule already matches
`*-prod.sops.yaml`, so the new files encrypt to the same age recipient.
apps/wave-0/kustomization.yaml is GENERATED, so render.py learns the `-prod` sidecar rather
than the golden being hand-edited: `<db>-backup-credentials-prod.sops.yaml` now places into
the DB's wave alongside its unsuffixed twin (both must exist before the Cluster that names
one), and the selftest asserts it.
Co-Authored-By: Claude Opus 5 <[email protected]>
Prod has been archiving WAL to `TBD-PROD-S3-BACKUP-ENDPOINT` since bootstrap.
Verified live 2026-09-07 on all three CNPG Clusters: ContinuousArchiving=False,
"unexpected failure invoking barman-cloud-wal-archive: exit status 4". Because
archive_mode is ON, that is not a degraded backup — it is a DISK-FULL CLOCK.
Postgres will not recycle a segment it has not archived, so keycloak-db's pgdata
PVC is at 579 MiB used / 4360 MiB free and climbing monotonically. When it fills,
the primary PANICs and takes SSO down, and with it kubectl OIDC, Grafana,
Headlamp, Gitea and forward-auth. Wiring the endpoint is what lets Postgres drain
the whole accumulated backlog in one pass.
THE KNOB LAYOUT (three new, one repurposed) and why it is shaped this way.
The operator created exactly ONE R2 bucket, `k3s-prod-backup`, but the two backup
tools want differently-SHAPED values: the Velero chart takes `bucket` and `prefix`
as separate fields, while CNPG's barmanObjectStore.destinationPath is one full
s3:// URL whose first path segment IS the bucket. So:
S3_BACKUP_ENDPOINT dev http://192.168.1.9:9000 prod https://<acct>.r2...
S3_BACKUP_REGION dev us-east-1 prod auto
VELERO_BACKUP_BUCKET dev velero prod k3s-prod-backup
VELERO_BACKUP_PREFIX dev "" prod velero
CNPG_BACKUP_PATH dev s3://cnpg prod s3://k3s-prod-backup/barman
There is deliberately NO separate `S3_BACKUP_BUCKET`: CNPG's bucket already lives
inside CNPG_BACKUP_PATH, and a second knob holding the same bucket name twice is a
rotation waiting to drift. Three knobs, each shaped for its own consumer, and no
two of them can contradict each other.
TENANCY. Inside k3s-prod-backup, velero and barman get disjoint TOP-LEVEL
prefixes — s3://k3s-prod-backup/velero/ and s3://k3s-prod-backup/barman/<cluster>/
— with the bucket ROOT left empty so a misrendered prefix lands somewhere
obviously wrong instead of silently colliding. This is not tidiness: Velero ADOPTS
every backup under its location and TTL-DELETES it on retention, so an overlapping
prefix would let it reap WAL segments; and interleaving two Postgres servers' WAL
into one prefix corrupts the chain outright. Dev↔prod isolation is doubly
independent — different endpoint AND different bucket names — so neither cluster
can reach the other's objects even with a mis-substituted prefix.
DEV IS UNCHANGED, BYTE-FOR-BYTE, and that is asserted rather than assumed. Base
defaults are dev's LIVE values (verified against the running cluster: BSL
bucket=velero with NO prefix, region us-east-1; all three CNPG Clusters
ContinuousArchiving=True at s3://cnpg on the MinIO), and the dev overlay now
restates all five explicitly for the same reason LONGHORN_DATA_PATH is restated —
a silent drift in base would ORPHAN the backups dev's PROVEN restore depends on.
The empty-prefix case was the one real risk, and it is settled empirically: with
prefix "" the chart omits objectStorage.prefix from the rendered
BackupStorageLocation ENTIRELY (helm template, chart 12.1.0), so dev's live BSL is
unchanged, not merely equivalent.
R2's TWO GOTCHAS, both wired up front:
- region must be exactly `auto`. head-bucket answers {"BucketRegion":"WNAM"},
which is a PHYSICAL LOCATION HINT, not a signing region. This was hardcoded
us-east-1 inside the Velero HelmRelease — correct-by-accident for MinIO, wrong
for anything else — so it is a knob now.
- checksumAlgorithm: "". velero-plugin-for-aws v1.14.2 bundles an AWS SDK with
flexible checksums on by default and sends x-amz-sdk-checksum-algorithm /
x-amz-checksum-crc32 on every PUT; R2 rejects those with HTTP 400
InvalidArgument, failing every backup and every kopia blob upload. It must be
PRESENT-but-empty (the plugin branches on the key existing), and the chart does
emit an empty value — verified by rendering it. Harmless against MinIO, so it
is unconditional rather than a fourth knob.
WHAT THIS DOES NOT DO. Velero stays SUSPENDED on prod. `spec.suspend: true` is
owned by field manager `flux` (verified: kustomize-controller's managedFields do
not include f:suspend), so server-side apply will not strip it, and nothing here
declares suspension — which would also trip R-ENV-03, since a prod overlay may
patch only cluster-vars and a Flux Kustomization's `decryption`. Unsuspending is
the operator's, after `standup.sh --s3-endpoint <r2> s3check` proves a round trip.
NO DNS KNOB IS TOUCHED. BASE_DOMAIN stays prod.home.keithjackson.dev and every
EXTERNALDNS_* value is untouched. The apex inversion on work/prod-standup-campaign
was deliberately NOT carried: this branch ports that branch's R2 reasoning knob by
knob, and merges nothing.
VERIFIED: ci/l0.sh green (flux-postbuild-substitution 272 assertions, 0 hazards,
33 knobs defined / 28 referenced, every new token resolved in BOTH overlays);
render-golden, lint, schema, spec-immutability green; touched requirement
R-STATE-03 covered.
Refs R-STATE-03, R-IDP-05, R-ENV-02, R-ENV-03.
Co-Authored-By: Claude Opus 5 <[email protected]>
Written by platform/backup/set-r2-credentials.sh (operator, 2026-09-07T05:41:34Z)
into all four consumers, in the two shapes they need: velero wants an AWS INI
file, CNPG/barman wants discrete ACCESS_KEY_ID / ACCESS_SECRET_KEY. All four
verified to carry the SAME 32-character key id, so no consumer was missed.
Proven from a pod INSIDE prod against
https://7ce452a1b3d6c86daf2c020edcb82d37.r2.cloudflarestorage.com:
head-bucket on k3s-prod-backup returns BucketRegion WNAM, and PUT and DELETE both
succeed. Byte-integrity of GET is NOT yet proven (the aws-cli image has no cmp);
s3check is what will establish it.
Credentials only — no endpoint or bucket wiring. That is feat/r2-backup-prod.
Co-Authored-By: Claude Opus 5 <[email protected]>
OPERATOR DECISION 2026-09-06: "use the VIP as intended — a virtual address to reach
the cluster and provide fault tolerant HA. Without a change it will not work in HA."
THE DEFECT. Cilium's kube-proxy replacement dialled a SINGLE NODE. Re-confirmed live
before changing anything: all three prod cilium-agent pods carried
KUBERNETES_SERVICE_HOST=192.168.2.10 — k3s-prod-1's own address — while the kube-vip
VIP 192.168.2.9 was Running on all three nodes with a held lease. Lose prod-1 and the
CNI's control-plane path is dead on an "HA" cluster. clusters/prod's own comment said
the value must be the VIP and NOT .10, then called it "Not yet decided" — I treated
that stale comment as an open question when the evidence already settled it.
SPLIT, NOT REPOINT, because k3s_api_host had two consumers with opposite needs:
k3s_api_host unchanged — the FOUNDER's IP: the cold-bootstrap join
target and a tls-san. infra/tofu/outputs.tf GENERATES this
name, so renaming would ripple into tofu and the runbooks.
k3s_apiserver_endpoint NEW = {{ kube_vip_address }} — the HA address; what Cilium
consumes. Derived, not restated, so an environment overrides
ONE line and the VIP, the SAN and the CNI endpoint move
together. Prod needed no new override.
THE SECOND HAZARD, WHICH MY BRIEF DID NOT NAME and the agent found: pointing Cilium at
the VIP breaks a COLD bootstrap for the same reason the join would — site.yml ran
node-baseline -> k3s -> cilium, so Cilium would install against an address nothing
announced yet. That is the 2026-09-01 deadlock shape. Fixed by SEQUENCE, not value:
site.yml now imports kube-vip.yml BETWEEN k3s and cilium. It cannot go earlier
(kube-vip is a k3s auto-deploy manifest, so it needs a cluster) and it works there
because the DaemonSet is hostNetwork with KUBERNETES_SERVICE_HOST=127.0.0.1 — needing
neither CNI nor kube-proxy. roles/kube_vip gained a read-only `wait_for` on the VIP so
a cold run stops THERE with a named cause instead of surfacing as unreachable agents.
Also fixed a pre-existing bug that only mattered once this play joined site.yml: the
role's read-only interface probe ran without `check_mode: false`, so under --check it
was skipped and the assert fired with a misleading "set kube_vip_interface explicitly".
VERIFIED BY ME, not just reported:
renders dev K3S_API_HOST=192.168.1.49 prod=192.168.2.9 (each environment's VIP)
cilium template consumes k3s_apiserver_endpoint, not k3s_api_host
cold join still `--server https://{{ k3s_api_host }}:6443` — the founder
order site.yml: node-baseline -> k3s -> kube-vip -> cilium -> verify -> flux
gate full CI gate PASS
Agent-side, additionally: in-memory render of cilium-values.yaml.j2 per host showing
k8sServiceHost=the VIP with the join still on the founder; k3s_tls_sans renders
['.10','.9','127.0.0.1','.11','.12'] so NO cert reissue and NO k3s restart is involved
— .9 already answers under full CA verification; and --check --diff of kube-vip.yml
against prod reported 6 ok / 0 changed, i.e. the role edits change nothing about the
kube-vip prod already runs.
ha-control-plane-as-code 92 -> 112 assertions, turning two escalations into machine
checks: the Cilium template must use the endpoint var; the endpoint must derive from
kube_vip_address and k3s_api_host must not; per environment K3S_API_HOST must equal
that environment's VIP and be none of its node IPs (the [parity] contract, now
machine-checked rather than a comment); site.yml must order k3s -> kube-vip -> cilium.
Every new assertion mutation-tested and bites. One honest negative recorded: reverting
only the BASE default is not caught, because both overlays patch the key — the check
reads effective per-environment values, so the base default is unguarded.
APPLY ORDER, and this is the operator's step — nothing was applied:
PROD FIRST, and it is the low-risk direction (prod is the broken one). Push and let
Flux reconcile platform/cilium: the value change rolls the cilium-agent DaemonSet
ONE NODE AT A TIME (maxUnavailable: 1 — the knob that bounded the 2026-09-01
incident), it will not proceed past an unready pod, existing datapath survives an
agent restart, and .9 is already live before the change lands.
DEV SEPARATELY, operator present. Same mechanics but live dev agents dial
192.168.1.50, and dev is mid-DNS-migration on dev-live. Do not fold it into that.
ANSIBLE: nothing to run for either live cluster; the Ansible half matters only for a
cold build. Remove the now-redundant standalone kube-vip.yml step from any runbook.
NEW NAMED GAP, unwritten: the L2 test cannot assert the running agents' live
KUBERNETES_SERVICE_HOST, which is the drift the L0 check cannot see. Recorded in that
test's gap list.
Refs R-PLAT-01, R-NET-01, R-ENV-02.
Co-Authored-By: Claude Opus 5 <[email protected]>
Prod's UniFi VM has no disk. `DataVolume unifi/unifi-rootdisk` stuck in
ImportScheduled for hours, because Kyverno denied CDI's own generated pod:
validate.kyverno.svc-fail denied Pod/unifi/importer-prime-<uid>
require-auth-mode-label (R-IDP-02)
require-egress-class-label (R-NET-05)
Both policies match any Pod in an `app-namespace: "true"` namespace with no
exclusion, and CDI generates `importer-*` itself — it cannot carry repo labels.
A COLD-START defect, not a prod quirk: dev's identical import Succeeded 9 days
ago, before the policies enforced, so dev has never exercised it and would hit it
on any rebuild. Fourth bug of this shape in two days.
MECHANISM: a MUTATE ClusterPolicy that ADDS
`egress-class: internet` + `auth-mode: none` (add-if-absent anchor) to Pods on
CREATE in app namespaces WHEN the requesting subject is ServiceAccount
`cdi/cdi-sa`. Both validate policies are untouched — no exclude, no exception,
`background: true` preserved on them.
Why mutate beats exempting: the requirement stays literally true ("every pod in an
app namespace declares both labels") and the values are HONEST — the importer does
pull over the default WAN path, and `internet` is the least-reach class (it does
not grant the VPN path); a transient worker pod with no UI genuinely is
`auth-mode: none`.
THE MATCH IS IDENTITY, NOT A NAME. `subjects: ServiceAccount cdi/cdi-sa` is the
AdmissionReview userInfo, taken from the real prod denial
(`system:serviceaccount:cdi:cdi-sa`, name importer-prime-…, op CREATE). A name
prefix is attacker-choosable; a requesting ServiceAccount is not — and the test
proves it, with a fixture `importer-prime-forged-by-an-app` that copies both the
name prefix AND CDI's labels and is still DENIED. Covers every CDI worker kind
(importer/uploader/cloner) without enumerating names that change per release.
Confirmed on prod that cdi-sa is the only cdi-namespace SA that can create pods.
REJECTED, and the first one is a trap worth recording:
* PolicyException — the CRD EXISTS (v2/v2beta1, from the pre-applied bundle) but
all controllers run `--enablePolicyException=false` (verified live on prod:
admission, background and reports controllers all carry the flag). An exception
would apply cleanly through Flux and be SILENTLY IGNORED. Enabling the gate is a
cluster-wide capability change for no gain over the mutate.
* `exclude` scoped to cdi-sa — sound identity, worse consequences: any userInfo
match forces `background: false`, which would drop background scanning and
policy-report coverage of R-NET-05/R-IDP-02 for ALL EXISTING PODS to fix one pod
class. It also leaves the importer with no labels at all — the unlabelled
fall-through that require-egress-class-label's own header calls a fail-open leak.
* name-prefix / CDI-label matching — attacker-choosable, and proven walkable.
TWO-WAY PROOF, non-vacuous by construction — same resource, different requester,
opposite outcomes (verified by me, not just reported):
userinfo cdi-sa -> mutate pass, require-egress-class pass, require-auth-mode pass
userinfo ordinary -> mutate SKIP, require-egress-class FAIL, require-auth-mode FAIL
Kyverno L0 went 17 -> 29 tests passed, 0 failed. The mutate policy is deliberately
kept OUT of the existing tests/kyverno-test.yaml: that suite declares no userinfo,
and without userinfo the offline engine does not discriminate on subjects — it
mutates everything, which would have silently turned its negative rows into passes.
platform-config/kustomization.yaml is the live apply path for these ClusterPolicies;
without it the policy never reaches a cluster.
RESIDUAL TRADE-OFF, reversible by deleting one file: anything created by cdi-sa in
an app namespace now has these labels supplied rather than being rejected for not
declaring them — including a pod that is not a CDI worker. That identity already
holds `pods create/delete` cluster-wide via ClusterRole `cdi`, so it is not a new
capability; what changes is that for that one identity the declaration is assumed
rather than demanded. restrict-host-namespaces, the namespace default-deny baseline
and the CiliumNetworkPolicies all still apply.
FIRST resource-mutating policy on this cluster: kyverno-resource-mutating-webhook-cfg
holds 0 webhooks today; with autoUpdateWebhooks=true Kyverno registers
mutate.kyverno.svc-fail for Pods within seconds of this applying. Prod's
forceFailurePolicyIgnore=false makes it failurePolicy: Fail — same posture as the
validating webhook already in that path.
CDI retries importer creation on a loop, so the stuck import should proceed once
this lands. The detached prime-be3f9d1c-… 40 GiB scratch PVC is separate operator
cleanup; untouched, as is the DataVolume.
VERIFIED: full CI gate PASS. Nothing applied to any cluster.
Refs R-IDP-02, R-NET-05, R-PLAT-01.
Co-Authored-By: Claude Opus 5 <[email protected]>
`platform-config` applied the CDI CR *and* cdi-storageprofiles.yaml in ONE pass.
StorageProfile's CRD does not exist until cdi-operator reconciles that CR, and
Flux server-side dry-runs every object before applying any — so the unknown kind
aborted the tier, the CR was never applied, the CRD was never created, and the
tier could NEVER converge. Observed on prod: cdi-operator Available 12h, no CDI
CR, no storageprofiles CRD, every downstream tier blocked.
The profiles now live in their own tier ./platform-config-cdi with
dependsOn: platform-config and wait: true. Because dependsOn is REVISION-gated
and platform-config runs wait: true, the CDI CR must be applied AND healthy —
exactly the event that creates the CRD — before the profiles are applied. Cold
clusters order themselves. `standup.sh crds` is retained as a fallback for
clusters already stuck, and because it is idempotent.
THE GENERALISABLE RULE (recorded in clusters/README.md): a CR whose CRD is
created by a CONTROLLER AT RUNTIME is second-order and needs its own pass.
cdi-operator.yaml registers exactly ONE CRD (cdis.cdi.kubevirt.io); storageprofiles,
datavolumes, datasources and dataimportcrons appear only after it reconciles the
CDI CR. An audit found StorageProfile is the only second-order kind in
platform-config — KubeVirt, CDI, KeycloakRealmImport, CNPG Cluster,
VolumeSnapshotClass, ClusterIssuer, PrometheusRule, ServiceMonitor and the Cilium
L2 CRs all have their CRD in git or in a chart.
Moving the CDI CR up into `platform` was rejected: that would put CDI's health on
the tier the CNI gates and everything waits on — the mistake the oauth2-proxy and
headlamp splits exist to undo.
apps-vms gains dependsOn: platform-config-cdi. LOAD-BEARING, not cosmetic:
apps/vms/unifi/20-datavolume.yaml provisions on storageClassName: longhorn-vm and
its comment claimed platform-config guaranteed the profiles — which this move
would have silently falsified.
THE PRUNE TRANSIENT, MEASURED RATHER THAN ASSUMED. platform-config has
prune: true, so it deletes both profiles once, CDI recreates them with empty spec,
and the new tier re-applies the overrides ~30-60s later. Compared our override
against CDI's unaided inference for the same Longhorn provisioner on dev:
longhorn-vm (we override) spec RWX/Block -> status ReadWriteMany/Block
longhorn-static (no override) spec unset -> status ReadWriteOnce/Block
Both infer cloneStrategy: snapshot. So cloneStrategy is NOT at risk; accessModes
IS — unaided CDI gives RWO. A DataVolume provisioned on longhorn-vm inside the
window would be stamped RWO/Block and be PERMANENTLY non-live-migratable. Flux can
no longer cause it (apps-vms gates on the new tier); a human must not do it by hand.
Corroborating evidence that the recreate happens at all: dev has 5 StorageClasses
and 5 StorageProfiles, three with fluxOwner=NONE, spec unset and status populated
— CDI creating and inferring them with no Flux involvement.
MERGE PRECONDITION: `flux get kustomization platform-config` must be Ready on the
target first. If it is not, the profiles are pruned and sit at CDI defaults until
it recovers — and prod was in that state hours earlier. Fallback is the two-step
the Cilium move used (merge with prune: false, verify the ownership label moved,
restore prune: true).
substituteFrom: cluster-vars is declared even though the manifest has no ${TOKEN},
deliberately: conformance/tests/l0-static/flux-postbuild-substitution only audits
paths whose Kustomization declares it, so omitting it would move the file OUT of
the audited set — a blind spot for a future literal-token ship. Gate confirms it
stayed in (path=./platform-config-cdi files=2 defined=0 hazards=0). No SOPS
decryption stanza: the moved file is two plain CRs, so no overlay change was needed.
VERIFIED INDEPENDENTLY OF THE AGENT: platform-config renders 0 StorageProfile
while keeping the CDI and KubeVirt CRs; platform-config-cdi renders exactly the
two profiles; the graph is byte-identical across dev and prod with apps-vms
carrying both edges and no cycle. Full CI gate PASS.
KNOWN FOLLOW-UP: bootstrap/standup.sh TIER_ORDER does not yet include
platform-config-cdi, so `resume` will not wait on it. Another agent holds that
file; the PM will add it.
Refs R-GITOPS-01, R-ENV-02.
Co-Authored-By: Claude Opus 5 <[email protected]>
INCIDENT FIX. Prod's external-dns DELETED EVERY ONE OF DEV'S PUBLIC DNS RECORDS. Both
clusters ran policy: sync against the SAME Cloudflare zone with the SAME implicit
txtOwnerId (`default`), so prod believed it owned dev's records, found no matching sources,
and removed them plus their TXT registry entries. Dev recovered ~30s after prod was scaled
to 0; verified restored against Cloudflare directly (my first check went through a pfSense
override and falsely showed healthy — local resolvers are not evidence about public DNS).
THE MISS WAS MINE, and it was a failure of imagination in how I briefed every agent. I put
"never touch dev" in brief after brief and enforced it — separate kubeconfigs, verified
--limit, sha-checked dev's kubeconfig before and after. Every one of those guards held. NONE
of them covered SHARED EXTERNAL RESOURCES. Prod reconciling its OWN correctly-authored
manifests reached across a third party and destroyed dev's state. Cluster-to-cluster
isolation was verified; the dependency that mattered was cluster-to-Cloudflare.
Operator's architecture: dev -> *.dev.home.keithjackson.dev, prod ->
*.prod.home.keithjackson.dev, apex CNAME <svc>.home -> <svc>.prod.home.
PHASE 1 ONLY (this commit): prod moves to its own subdomain. DEV IS NOT MIGRATED and its
effective hostname stays home.keithjackson.dev, so dev renders byte-identically and nothing
live moves. That alone ends the collision and unblocks prod. Phase 2 (dev -> dev.home. +
apex CNAMEs) is deferred to when the operator is present: it relocates Keycloak's issuer and
12 clients' redirect URIs, forces a rolling k3s restart and kubectl SSO re-issue for every
user, and moves gitea.home. — which is BOTH the GitOps source and the current push target.
BASE_DOMAIN WAS A DEAD KNOB — it existed in cluster-vars but the status report flagged it as
referenced by nothing, because hostnames were hardcoded throughout. Now real: 141 refs.
Searched the AUTHORITATIVE reconciled set by resolving each Flux spec.path transitively via
conformance/lib/status.py — the same resolver the L0 gate uses, so "what Flux reconciles"
has one definition. 185 occurrences across 47 files in 154 reconciled files. Tokenized:
Gateway listeners, the wildcard Certificate, coredns-custom, external-dns, Keycloak
instance/realm (26 redirect URIs), oauth2-proxy, Grafana OIDC, all HTTPRoutes, Homepage's 15
links, 30 runbook_urls, unifi cloud-init, render.py's ZONE constant (which drove
--oidc-issuer-url/--cookie-domain/--whitelist-domain on every forward-auth sidecar) and 11
catalog/ ServiceDefinitions re-rendered canonically. Left alone: 43 comment/prose
occurrences and non-reconciled paths.
TWO THAT CANNOT BE TOKENIZED, flagged not forced:
- headlamp's OIDC URLs live inside a SOPS-encrypted Secret; re-encrypting rewrites the MAC
over every value and the OFFLINE harness cannot verify it (kustomize does not decrypt),
so an error would break live-dev SSO with no pre-flight proof. Prod needs its own copy
anyway — client secrets are realm-scoped.
- kube-apiserver --oidc-issuer-url is a k3s SERVER FLAG, not a manifest, so Flux can never
reach it. Done on the inventory seam instead (k3s_base_domain -> k3s_oidc_issuer_url,
overridden in group_vars/k3s_prod). Verified per host: dev keeps the default, prod gets
prod.home.
EXTERNAL-DNS OWNER, the actual incident cause: txtOwnerId is now explicit per environment —
dev renders exactly `default` (the chart default it was already using, so its existing
records stay recognised) and prod gets `prod`. The BASE default is a NON-COLLIDING SENTINEL,
deliberately not `default`, so a future environment that forgets the knob owns nothing and
can delete nothing rather than silently inheriting dev's identity.
I OVERRODE ONE AGENT DECISION against our own prior finding: it narrowed prod's
domainFilters to prod.home.keithjackson.dev as defence in depth. FINDING F-DNS1
(DECISIONS-LOG 2026-08-17) already proved a subdomain filter DROPS THE PARENT ZONE —
ExternalDNS generates the record then skips it with "no hosted zone matching record DNS
Name". Prod would have published NOTHING. Set to the ZONE (keithjackson.dev) like dev.
Isolation comes from the subdomain split plus txtOwnerId, which is what the incident
actually needed and what a domain filter cannot provide.
DEV PROVEN UNCHANGED: 11 of 12 substituting paths byte-identical; the 12th differs by
exactly one line, `+ txtOwnerId: default` — the value dev was already using implicitly.
POSITIVE CONTROLS confirm the harness is not blind: perturbing BASE_DOMAIN moves 10 of 12
hashes (the 2 that don't provably contain no hostname), perturbing the owner id moves
exactly 1. Prod's rendered output has ZERO home.keithjackson.dev references outside prod.,
and its cert renders *.prod.home.keithjackson.dev — no overlap with dev's.
L0 substitution assertions 106 -> 254; BASE_DOMAIN is no longer flagged dead. Gate PASS.
PROD REMAINS SUSPENDED (platform + 10 downstream tiers) pending review; nothing applied.
Serves: R-ENV-02, R-DNS-01, R-DNS-02, R-DNS-03, R-TLS-01.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Prod is being stood up now, without waiting for node 2's RAM upgrade. Three coupled
changes, all applied and verified on all three nodes.
=== 1. KERNEL >= 6.13 — now a PREREQUISITE, not a nice-to-have ===
A k3s SERVER that intermittently boots with 2.6 GiB is not a degraded node; it fails under
etcd plus its workload share, unpredictably, on any reboot. Fixed before k3s goes on.
roles/node_baseline gains a `kernel`-tagged block: asserts the suite matches the node's
Debian release, writes a deb822 trixie-backports source, installs, reads back the exact
version, writes a provenance/rollback note to the node. Scoped by
node_baseline_backports_kernel (default FALSE, true only in group_vars/k3s_prod) — chosen
over a hostname test so a fourth prod node inherits it from group membership. Verified:
--check against dev skips all 8 tasks on all 3 hosts. Two deliberate calls: `state: latest`
not `present` (linux-image-amd64 was already installed from main, so `present` would have
silently fixed nothing), and NO preferences.d pin (backports' NotAutomatic +
ButAutomaticUpgrades already gives 100/500; an explicit Pin-Priority: 100 would switch OFF
automatic security upgrades for the very kernel being installed).
Installed 7.1.8+deb13-amd64 on all three; 6.12.107 kept bootable.
THE DECISIVE PROOF: node 2 booted at MEMATTR=0xbeeb0018 — the EXACT address that gave it
2.6 GiB twice — and now reserves 634,904K instead of 13,958,980K. MemTotal 15.4 GiB. Same
address, handled correctly; not a lucky draw.
§0b's claim that a fixed kernel prints 'FW_BUG Corrupted...' is CONDITIONAL and was
corrected: >=6.13 has three rejection gates and only the third prints that line; all three
nodes hit gate 1 (version > 2). Proof instead is boot-independent — decompressing
/boot/vmlinuz on all three yields the FW_BUG and descriptor-size strings verbatim; neither
exists in 6.12.
TWO MORE BUGS IN MY OWN HEALTH CHECK, found because the fix couldn't otherwise be shown:
- MEMATTR_VERSION_RE matched (\d+) but the kernel prints that field with %d — SIGNED. Node
2's real value was -1569980416, which did not match, so state fell through to `clean` and
the node reported PASS "the kernel accepted it without complaint". A FALSE PASS on the
exact bug the check exists to find. Now (-?\d+).
- bad_version was WARN unconditionally, so a FIXED node would have stayed WARN forever.
Now keys on memattr_kernel_fixed: same line, WARN below 6.13, PASS at/above.
=== 2. DISK LAYOUT — Longhorn claimed, per-node paths DISCOVERED not hardcoded ===
Operator decision: reuse the ~424 GB partition; accept the shared-device I/O risk (dev's
etcd/Longhorn contention was on a spinning HDD, prod is SSD/NVMe).
Device paths differ per node (sda5 / nvme0n1p5 / sda5), so the role DISCOVERS the partition
via `findmnt --mountpoint` on a declared claim mountpoint rather than trusting inventory.
Per-host host_vars would have frozen today's hardware into inventory, where it goes stale on
the first re-image and the stale value's failure mode is mkfs on the WRONG partition.
Eleven fail-closed asserts before any write: real block device, not backing / /boot /usr
/var /home /tmp or active swap (built from the node's OWN gathered facts, never a hardcoded
list), already ext4, no foreign label, >= 100 GiB, and empty. Relabel, never reformat.
/srv verified empty first on every node (ls -A -> lost+found only; du 20K; the "5.1% used"
was ext4's default 5% root reserve).
=== 3. k3s DATA-DIR MOVED — /var was 11.8 GiB and would have killed etcd ===
Measured on the fully-deployed dev cluster: containerd 21-25 GB/node, /var total 58-70 GB.
Prod's /var is 11.8 GiB and held BOTH etcd and the image store, so prod would have filled
/var during its first image pulls — and a full /var means etcd cannot write its WAL. Cluster
death, not degradation, arriving during bring-up. Invisible when the disk decision was made,
because "etcd on root" sounded like the 30 GiB / rather than a separate 12 GiB /var.
Now: p5 -> /data (LABEL=k3s-data), with /data/longhorn and /data/k3s. Neutral names chosen
deliberately — the partition now has two tenants, and reusing /srv would make "claimed" and
"unclaimed" indistinguishable to the idempotency pivot, while a bare `data` label would make
a stranger's `data` volume look already-claimed and weaken an assert.
The transition off the existing LABEL=longhorn mount is DECLARED, not inferred
(node_baseline_data_retired_fs_label/_retired_mount, defaults ""), because changing the label
makes a claimed node answer "no" to the pivot and walk into the greenfield path. Self-retiring
once blkid -L k3s-data succeeds. THREE independent gates keep live dev out: retired vars
default ""; gated on longhorn_source == claim-mountpoint (dev is `device`); and the emptiness
assert fails closed on dev's 18 volumes even if both were defeated.
k3s_data_dir is one variable read by two roles (k3s_server --data-dir; node_baseline derives
the etcd mount). Role default is k3s's own default, so dev is unchanged and keeps its
dedicated etcd device. node_baseline_etcd_source becomes `shared-data-partition` and is
LOAD-BEARING: the role asserts per run that the filesystem backing the etcd dir really IS the
data partition — had the mount silently failed, etcd plus 21-25 GB of images would land back
on the OS filesystem invisibly until the disk filled.
LONGHORN_DATA_PATH is a new cluster-vars knob (R-ENV-02): base and DEV /var/lib/longhorn,
prod /data/longhorn.
DEV PROVEN UNCHANGED, which is the property that mattered — the live cluster has 18 Longhorn
volumes on that path. All 12 substituting Flux paths rendered through
`kubectl kustomize | flux envsubst --strict` for both trees: 12/12 per-file SHA-256 identical
and an identical aggregate SHA over every rendered dev byte. With a POSITIVE CONTROL showing
the same harness detects prod changing on exactly one line — an all-identical result is
worthless if the harness cannot see change. Live check after: dev's default-data-path setting
still /var/lib/longhorn, 18 volumes attached, 0 Kustomizations unready.
Idempotent: run 2 is changed=0 on all three nodes. Also fixed a real tag bug — include_tasks
does NOT propagate its own tags to included tasks (unlike import_tasks), so `--tags disks`
selected the include and ran nothing inside it while reporting success.
OPEN DEFECTS, tracked not forgotten: node 2's warm-reboot hang (one clean reboot since, NOT a
fix); and node 3 runs dhcpcd for its wifi interface, which rewrites /etc/resolv.conf on lease
renewal — the role's `contended` detection checks resolvconf and NetworkManager only, so node
3's decided resolvers will silently revert.
Gate: MERGE GATE: PASS. L0 substitution check 106 assertions.
Serves: R-ENV-01, R-ENV-02, R-ENV-03, R-STATE-01, R-STATE-02, R-PLAT-01. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Cilium was one of ~12 components inside a single `platform` Kustomization with wait:true,
so the CNI's health was indistinguishable from eleven unrelated components in the tier's
Ready condition, and the only emergency valve was freezing the whole platform tier. This
repo already set the precedent in reverse (oauth2-proxy and headlamp were split OUT so
unhealthy leaves would not gate a tier); Cilium is the mirror image — the one component
that legitimately SHOULD gate everything.
New clusters/base/cilium.yaml: path ./platform/cilium, wait:true, prune:true, interval 1h
(a CNI does not need a 10m re-render cadence; kustomize-controller is source-triggered so
a push still reconciles immediately — the interval is only the drift-correction floor),
timeout 10m (a 3-node DaemonSet rollout with wait exceeds the 5m default),
dependsOn:[flux-system], and postBuild.substituteFrom: cluster-vars — the last is
LOAD-BEARING, not decorative: helmrelease.yaml references ${K3S_API_HOST} and
kustomize-controller now runs --feature-gates=StrictPostBuildSubstitutions=true, so
without it this Kustomization would fail immediately.
*** THE HAZARD WAS FAR WORSE THAN "the CNI gets pruned" ***
platform/cilium/namespace.yaml is the ONLY declaration of Namespace/kube-system anywhere
under ./platform, and the live object carries kustomize.toolkit.fluxcd.io/name=platform.
With prune:true, the moment ./platform/cilium leaves platform's path the stale set is not
"the Cilium HelmRelease" — it is `kubectl delete namespace kube-system`, taking coredns,
metrics-server, local-path AND Cilium. A full cluster kill, not a CNI kill.
TWO INDEPENDENT PROTECTIONS, deliberately not trusting either alone:
1. prune:false on `platform` for this transition merge — Flux's documented Procedure 1 for
moving resources between Kustomizations. Chosen over the per-resource
`kustomize.toolkit.fluxcd.io/prune: disabled` annotation because that needs THREE merges
and leaves the new Kustomization owning resources it can never prune.
2. The pruner's own owner-label filter. In v1.4.0, prune() passes Inclusions:
GetOwnerLabels(obj.Name...), so platform only deletes objects whose LIVE labels still
say name=platform. The new cilium Kustomization relabels all three to name=cilium on
apply, and platform.dependsOn:[cilium] is REVISION-GATED, so platform provably cannot
reconcile revision N until cilium has APPLIED revision N. The relabel deterministically
precedes the prune.
Protection 2 alone would probably have sufficed. Not betting kube-system on "probably".
NOTED FOR THE FUTURE, in-file: anyone moving a platform/* component must first check
whether it is the sole declarer of a shared Namespace — that turns a component-scoped
prune into a cluster-scoped one.
Verified: `kubectl kustomize platform` goes 88 -> 85 documents, 3 removed / 0 added /
0 CHANGED, and `kubectl kustomize platform/cilium` reproduces those 3 byte-identical
(sha256-matched). A pure ownership move; no Cilium value touched. L0 substitution gate
103 assertions (was 102), new cilium row, 0 hazards. Server-side dry-run against the live
cluster accepted both CRs. clusters/prod renders clean off the same base.
MERGE 2 (restore prune:true) follows only after verifying: 13/13 Ready; kube-system, the
HelmRelease and the HelmRepository all relabelled to name=cilium; platform's inventory no
longer lists them; and Cilium pod ages/restarts UNCHANGED from
cilium-2f8h8 r=0 2026-09-01T05:55:27Z / cilium-425m8 r=1 2026-08-30T13:25:10Z /
cilium-54cww r=0 2026-09-01T05:55:26Z, HelmRelease v11.
Serves: R-PLAT-01, R-GITOPS-01.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
During the substitution incident a bad render (k8sServiceHost: "") took down TWO of three
Cilium agents simultaneously. The agents' `config` init container falls back to the API
ClusterIP, which only the Cilium agent itself can translate — and that agent is the one
being replaced — so it deadlocks on `dial tcp 10.43.0.1:443: i/o timeout`.
Root cause of the 2-at-once: `updateStrategy.rollingUpdate.maxUnavailable: 2` is the
UPSTREAM CHART DEFAULT, confirmed by downloading cilium-1.20.1.tgz and reading
values.yaml:437-444 — not a local choice, and not overridden anywhere in this repo.
maxUnavailable: 1 makes a rollout replace ONE agent at a time and stop at the first pod
that fails to become Ready. The whole value of the setting is that the rollout halts on
the first bad node instead of taking the majority of the dataplane with it, and that
guarantee only exists at 1. It matters far more on a cold PROD bootstrap, where there is
no healthy peer to recover from — dev only self-healed because k3s-dev-3 kept a working
agent throughout.
Set as a [parity] field in ALL THREE places, per this repo's documented contract that the
Ansible bootstrap values and the Flux HelmRelease values must agree on settings that
define cluster networking (Ansible installs Cilium at bootstrap; the HelmRelease adopts
it; the two layers fight otherwise):
platform/cilium/helmrelease.yaml (authoritative for Flux)
infra/ansible/roles/cilium/templates/cilium-values.yaml.j2 (authoritative for bootstrap)
platform/cilium/values.yaml (reference mirror, kept in sync)
Verified by rendering the .j2 with roles/cilium/defaults and diffing full value sets: every
[parity] field is byte-equal across all three; only k8sServiceHost differs, as designed
(${K3S_API_HOST} vs {{ k3s_api_host }}).
MERGING THIS IS NON-DISRUPTIVE. updateStrategy lives at DaemonSet.spec.updateStrategy — a
SIBLING of spec.template (chart daemonset.yaml:49-53). The DaemonSet controller decides a
pod is out of date by hashing spec.template alone, so the pod-template hash does not move,
no new ControllerRevision is created, and zero pods are recreated. Helm patches the field
in place. (If it were disruptive it would be self-defeating: rolling agents under the old
maxUnavailable: 2 in order to install maxUnavailable: 1.) Verify after reconcile with
`kubectl -n kube-system get ds cilium -o jsonpath='{.spec.updateStrategy.rollingUpdate.maxUnavailable}'`
plus unchanged pod ages — that is the cleanest proof nothing rolled.
Trade-off recorded in the comments: upgrades serialise, roughly two waves to three at 3
nodes (a minute or two). On a large cluster this becomes painful and a percentage such as
"10%" would be right — noted so a future larger cluster revisits it deliberately.
SCOPE: this bounds blast radius, it does NOT close the substitution race. A bad render
still ships; it now breaks one node and stalls rather than taking the majority.
platform.dependsOn: [flux-system] (P0) is the fix for the cause.
Serves: R-PLAT-01, R-NET-01.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Adds conformance/tests/l0-static/flux-postbuild-substitution/ — an offline, stdlib-only
L0 check tagged R-ENV-02 + R-GITOPS-01 (deliberately NOT R-TEST-01, which would
overclaim). It reuses lib/status.py's `resources:` walk rather than forking it, so "what a
path renders" has exactly one definition. It asserts: every ${...} on a substituted path
is defined-or-escaped (comments included); no default-operator form on an undefined name;
no unparseable expansion; the rendering path actually substitutes cluster-vars; every
overlay-patched /data/KEY has a base default; and that the gate itself is load-bearing.
WIRED AS AN UNCONDITIONAL STAGE (3c) in ci/l0.sh, and that matters: stage 3b scopes to
touched requirements, and ci/touched-requirements.sh maps only clusters/* to R-ENV-02 —
so an edit to a substituted manifest under apps/ or platform/ would have filtered this
check out of exactly the change that introduces the bug. l0 fail -> BLOCK=1 in gate.sh.
Mutation-tested all five assertion classes (undefined token, indexed expansion, :- form,
missing substituteFrom, un-wired gate); each fails as intended, baseline green.
STRICT MODE IS PROVEN SAFE TO ENABLE — measured, not inspected. For all 11 substituted
paths, `kubectl kustomize --load-restrictor LoadRestrictionsNone <path> | flux envsubst
--strict` exits 0 against cluster-vars base defaults. Negative control confirms the
incident: with K3S_API_HOST unset, non-strict renders k8sServiceHost empty while strict
exits 1 with `variable not set (strict mode)`. The feature gate itself is NOT flipped
here — that is a live-cluster change and the operator's call.
Escapes the six comment hazards that stood in the way (apps/vms/unifi x4,
platform/longhorn x2). All were prose ABOUT the escaping convention; since the repo's own
contract is that $${...} emits a literal ${...}, escaping them is both precise and
self-consistent. kustomize strips these particular comments today, but comment survival is
an implementation detail — a body comment carrying $ WAS observed surviving into built
apps/wave-1 — and a survivor would kill the whole Kustomization.
DOCTRINE CORRECTED (measured against flux 2.4.0): clusters/base/apps-vms.yaml claimed an
indexed expansion is fatal "escaped or not". Escaping is TOTAL — $${ARR[0]} emits the
literal text safely; only the UNESCAPED indexed form is fatal. Corrected in place.
Also empties DOCUMENTED_GAPS in conformance/run.sh with rationale: R-ENV-02 and
R-GITOPS-01 now have a real verifying test, which run.sh's own comment named as the
trigger for removing them.
Advisory output (not failures): 6 dead cluster-vars knobs — BASE_DOMAIN, CLUSTER_ENV,
CLUSTER_POD_CIDR, PIA_REGION, PLATFORM_NODE_SELECTOR_{KEY,VALUE}. The last four are
documented reference-only; BASE_DOMAIN and CLUSTER_ENV look like genuine rot (hostnames
are hardcoded elsewhere) and are worth a follow-up.
Gate: MERGE GATE: PASS. 102 assertions, 0 hazards.
Serves: R-ENV-02, R-GITOPS-01.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
R-ENV-02 promises dev and prod differ ONLY by scoped cluster-vars overrides. In fact
dev LAN addresses were hardcoded into base manifests, so clusters/prod would have come
up ANNOUNCING DEV ADDRESSES (192.168.1.x) on the prod LAN (192.168.2.x).
New cluster-vars knobs (base default = dev literal, per the file's existing convention):
K3S_API_HOST platform/cilium/helmrelease.yaml (+ the values.yaml mirror)
CILIUM_LB_POOL_START platform-config/cilium/l2-ip-pool.yaml
CILIUM_LB_POOL_STOP "
UNIFI_L4_VIP apps/vms/unifi/50-service-l4.yaml
CRAFTY_L4_VIP platform/crafty/service-l4.yaml
S3_BACKUP_ENDPOINT platform/keycloak/postgres-cluster.yaml, apps/wave-0/{nextcloud,
semaphore}-db.yaml, and platform/velero/helmrelease.yaml
Also fixes GATEWAY_VIP's base default, which was still the RETIRED libvirt address
10.73.0.240, and adds the GATEWAY_VIP patch that clusters/prod was missing entirely.
clusters/base/apps-vms.yaml gains postBuild.substituteFrom (it was the one consuming
Kustomization without it, so a ${TOKEN} there would have shipped as a literal string).
The envsubst contract is documented there: ${VAR} substitutes and escapes as $${VAR};
$VAR and $(cmd) are left alone; ${ARR[0]} hard-errors. The three UOS_URL expansions in
the unifi cloud-init are escaped accordingly.
PROD ADDRESS PLAN (operator, 2026-08-31):
nodes .10/.11/.12 · control-plane VIP .9 (Ansible-side) · GATEWAY_VIP .20
Cilium LB pool .20-.30
CONTAINMENT INVARIANT, now documented at the pool and in the prod overlay: GATEWAY_VIP
MUST equal CILIUM_LB_POOL_START. The shared Gateway pins no address, so Cilium LB-IPAM
gives it the first free address of a matching pool block. An initial prod proposal put
.20 outside a .21-.30 pool; the Gateway would have come up on .21 while split-horizon
coredns-custom kept answering *.home.keithjackson.dev with .20 — an address nothing
announces — blackholing in-cluster OIDC hairpin traffic while reporting healthy. The
pool was widened to .20-.30. The control-plane VIP (.9) stays outside the pool so
kube-vip and LB-IPAM can never contend.
Values prod still cannot know stay INVALID `TBD-PROD-*` placeholders on purpose: base
defaults are dev values, so an omitted patch means prod silently inherits a dev address
— far worse than a loud failed apply.
DEV IS BYTE-IDENTICAL. Verified by kustomize build over 13 paths before/after, then
flux envsubst with the dev cluster-vars values applied to both sides: zero drift. The
only deltas are the intended additive keys in the overlay ConfigMap itself. No
unresolved ${TOKEN} survives. render-golden green (10 goldens); yamllint clean.
Serves: R-ENV-02. Task: T-7.1 (prerequisite). Gate: MERGE GATE: PASS.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
The kustomization pulled two REMOTE github bases (?ref=v8.2.0) that Flux's kustomize-controller
git-fetched on every reconcile; those fetches intermittently exceeded the 27s timeout ->
'kustomize build failed' BuildFailed events -> the whole platform tier stalled whenever GitHub was
slow. Vendored the exact v8.2.0 output to local crds.yaml + snapshot-controller.yaml (built with
kubectl kustomize; images transformer still re-pins the controller to v8.2.0), so the build is now
offline + deterministic. No change to what's deployed. platform/kubevirt has the same latent pattern.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Roll the verified Option-B per-app oauth2-proxy sidecar out to the remaining
four forward-auth apps after the pihole canary was confirmed fail-closed
(unauthenticated -> 302 to Keycloak, pod 2/2, clean sidecar OIDC discovery).
Each app's Gateway route now terminates at its oauth2-proxy sidecar (:4180,
--allowed-group=media-users, --upstream=http://127.0.0.1:<uiport>); the
gateway-ingress CiliumNetworkPolicy allows the Gateway to reach ONLY :4180, so
the bare UI is never served un-authenticated (fail-closed; R-IDP-02/06). The
apps' own app/API ports stay in-Service for EAST-WEST callers (arr ->
qbittorrent:8080 / jackett:9117) via the existing reciprocal-ingress allows.
- keycloak: confidential jackett/qbittorrent/radarr/sonarr clients (realm-import
+ realm-clients mirror), provisioned live via kcadm (groups membership mapper).
- secrets: four SOPS/age <app>-oauth2-proxy-credentials, wired into apps/wave-0
and apps/wave-1 by the renderer's sidecar-creds wave rule.
- ci: remove the temporary canary deferral (all five goldens now reproduce).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Close the un-gated-UI security finding for forward-auth apps (R-IDP-02) by
rendering the Option-B per-app oauth2-proxy reverse-proxy sidecar that crafty
proves working. catalog/render.py now emits, for any forward-auth app with an
exposed UI: the oauth2-proxy sidecar (upstream http://127.0.0.1:<uiport>,
:4180, --allowed-group per auth.group), an authproxy :4180 Service port, an
HTTPRoute backendRef -> :4180, and a gateway-ingress CiliumNetworkPolicy that
allows the Gateway to reach ONLY :4180 (fail-closed: the bare UI is never
served un-authenticated). oidc/native/none apps render byte-identical.
This is the CANARY: only pihole's golden carries the sidecar and is verified
fail-closed in-cluster first. jackett/qbittorrent/radarr/sonarr are deferred to
the rollout commit (temporarily listed in ci/render-golden.sh) so their UIs
keep serving exactly as today until their clients+secrets land.
- keycloak: confidential pihole client (realm-import + realm-clients mirror),
provisioned live via kcadm (groups membership mapper, bare names).
- secret: SOPS/age pihole-oauth2-proxy-credentials (client-id/secret/cookie),
wired into apps/wave-0 via the renderer's new sidecar-creds wave rule.
- L1 render goldens regenerated for the sidecar (forward-auth fixtures).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
App SSO broke cluster-wide after the Cilium 1.16.5->1.20.1 upgrade: the CVE-2025-30162 fix (in
>=1.16.8/1.17.2) makes the shared Gateway's L7 proxy re-evaluate a pod's egress policy against
Keycloak's REAL backend cluster identity (enforce_policy_on_l7lb) when it hairpins to keycloak.home.
'toEntities: world' matches the Gateway VIP at L3/L4 but not the resolved keycloak identity at L7, so
OIDC discovery/token 403'd ('Access denied') for every app with a NetworkPolicy (gitea/nextcloud/
semaphore/headlamp/crafty...); Grafana survived only because monitoring has no NetworkPolicy.
Fix: explicit toEndpoints egress allow to the keycloak backend for SSO apps.
- catalog/render.py: emit it for auth.mode in {oidc,forward-auth}; re-rendered 8 app goldens.
- platform/headlamp + platform/crafty: hand-written policies get the same allow.
Split-horizon design unchanged. Verified live: headlamp-ns -> keycloak discovery 403 -> 200.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The browser-mfa conditional-user-role authenticator used config key 'condition.evaluated.user.role',
which is not a real Keycloak property — the role resolved to null, so Keycloak logged 'Invalid role
name submitted: null' and the REQUIRED conditional-OTP step threw, 403-ing every platform-admins login
(Headlamp, Grafana admin, etc.). Correct key for Keycloak 26 is condUserRole=platform-admin.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Adds NodeCPUPressureHigh (CPU PSI 'some' > 15% for 15m) and NodeCPULoadHigh (load5/core > 1 for 15m)
to platform-health.nodes, plus a 'Nodes — CPU / Memory Pressure' Grafana dashboard (PSI + load-per-core
+ utilization). These surface the bursty CPU contention that averaged CPU%/kubectl top hides — the
signal behind 'spikes cause blips of delay'. Makes the 6->8 vCPU resize measurable.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Both were pinned at ~98% of their limits (Prometheus 2002/2048Mi, Grafana 499/512Mi) with no
headroom for TSDB compaction / dashboard-render spikes — the classic OOM setups. Nodes are 24Gi at
38-44% used (~14Gi free each; the '~22 GiB ceiling' comment predates the 16->24Gi node bump), so the
extra headroom is comfortable. Grafana request 256->384Mi, Prometheus request unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
chart 7 major bump. Verified chart 7.3.0 renders identically for this SingleBinary/filesystem/
Longhorn config (one loki StatefulSet, no extra read/write/backend/cache pods, no schema errors).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Text-only cleanup after the upgrade campaign. Updates stale version
strings, prose, and comments to the verified current facts; no
Kubernetes behavior or version pins changed except the kubectl
toolchain bump (below).
Verified facts applied: k3s v1.36.4+k3s1, Debian 13 trixie,
Cilium 1.20.1 / Gateway API v1.6.1, Longhorn 1.12.1, node RAM 24 GiB,
dedicated virtio2 SSD etcd disk per node, Velero chart 12.x / v1.18,
Grafana 13.2.0.
- Version strings across infra/ and platform/ READMEs + comments
- kubectl toolchain 1.31.4 -> 1.36.4 (devcontainer/ci/conformance
versions.env; 1.31 vs a 1.36 cluster exceeded the +-1 skew)
- Retired-single-apps-Kustomization refs -> apps-wave-0/1/2 + apps-vms
with per-wave SOPS decryption (flux/clusters docs + bootstrap.sh)
- COMPLETED/historical banners on the three executed plan docs
- Resolved TODO(WS-SEC) markers -> Renovate-maintained ranges
- Appended dated DECISIONS-LOG entry (2026-08-30) superseding the
2026-08-26 LIVE STATE line
Left as revalidation items (not blind-edited): external-snapshotter
v8.2.0 vs 1.36, Cilium ext_authz/forward-auth relevance under 1.20.1,
conformance ImageVolume feature-gate assertions under 1.36.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Grafana 12.x bundled in kps 88 OOMKilled (exit 137) at 256Mi during grafana-apiserver/unified-storage
startup — no fatal log, just SIGKILL. The new Grafana pod never became Ready, so Helm --wait ran the full
20m and rolled back to 65.8.1 every time. 512Mi holds.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The 65->88 multi-major upgrade exceeded the default 5m Helm timeout (full operator/KSM/
node-exporter + Prometheus/Alertmanager StatefulSet rollout), so Flux rolled back to 65.8.1
four times and Stalled, blocking the platform kustomization and everything downstream.
CRDs pre-applied server-side at operator v0.93.1.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Root cause of a W5 wedge: default 5m Helm timeout on slow-HDD Longhorn upgrades caused
a rollback attempt after the data had already migrated to the new minor, which the old
manager fatally refuses. Give the upgrade room and never auto-rollback (fail forward).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Gateway API CRDs bumped v1.2.1->v1.3.0 (required by Cilium 1.18; applied server-side).
Land on current k8s 1.32 before the 1.33 hop.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Land the two pacing components on current k8s 1.31 before the 1.32 k3s hop.
Cilium 1.17 supports k8s 1.29-1.32; Longhorn 1.8 supports 1.25+; Gateway API CRDs
stay v1.2.1 (Cilium 1.17 targets v1.2.x). Also commits the full upgrade plan doc.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Migrate image.toolkit.fluxcd.io/v1beta2 -> /v1 for ImageRepository,
ImagePolicy, and ImageUpdateAutomation ahead of the Flux v2.7+ upgrade
(cluster-upgrade-plan §3.2). Flux v2.4 (current) already serves /v1, so
migrating the manifests now is a safe no-op at runtime.
- catalog/render.py: r_image_automation emits v1 for ImageRepository/ImagePolicy
- platform/image-automation/{image-update-automation,per-service/pihole.example}
- conformance L3 hands-off-update chainsaw applies v1 CRs
- conformance L1 goldens re-rendered to match (apiVersion-only diff)
No spec-field changes required: all spec fields used (image, interval,
imageRepositoryRef, filterTags.pattern/extract, policy.semver.range,
sourceRef, git.*, update.strategy/path) are unchanged in v1; the v1
messageTemplate already uses .Changed (not the removed .Updated).
apps/ golden unaffected (canonical render uses --no-image-automation).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Headlamp OIDC login failed with `unsupported protocol scheme ""`. The
kubernetes-sigs/headlamp chart `envFrom`s the headlamp-oidc Secret verbatim
and renders args like `-oidc-idp-issuer-url=$(OIDC_ISSUER_URL)`, so the Secret
keys must be the exact env var names. The keys were camelCase
(clientID/issuerURL/scopes/callbackURL/clientSecret), following the mistaken
`.example`, so `OIDC_ISSUER_URL` was never defined. Kubernetes left the literal
`$(OIDC_ISSUER_URL)` in the arg and Headlamp's OIDC discovery hit
`Get "$(OIDC_ISSUER_URL)/.well-known/openid-configuration": unsupported
protocol scheme ""`.
Rename the SOPS Secret keys to OIDC_CLIENT_ID / OIDC_CLIENT_SECRET /
OIDC_ISSUER_URL / OIDC_SCOPES / OIDC_CALLBACK_URL (values unchanged, still
SOPS/age-encrypted). Fix the `.example` and README so the correct, load-bearing
key names are documented and the camelCase footgun can't recur.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The k3s VM disks are HDD-backed, so a full Longhorn replica rebuild's
sequential I/O can saturate the spindle and starve etcd's WAL fsync,
crash-looping etcd and flapping the kube-vip VIP (observed during a
rolling node resize). Cap rebuilds to one replica per node at a time so a
node bounce or replica replenishment can never storm the disks.
Set via HelmRelease defaultSettings.concurrentReplicaRebuildPerNodeLimit
(GitOps-managed, permanent). replica-replenishment-wait-interval stays at
the Longhorn default of 600s. Reference values.yaml kept in sync.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Supersedes the previous kubectl-image repoint. The velero chart's pre-install
`velero-upgrade-crds` HOOK job runs docker.io/bitnami/kubectl, whose public
Docker Hub catalog Bitnami removed (Aug 2025); `bitnami/kubectl:1.31` 404s,
leaving the hook in Init:ImagePullBackOff so Velero never installs.
Repointing the hook to the exact-version rancher/kubectl:v1.31.5 (prior commit)
does not work: that image is distroless, and the hook's init runs
`/bin/sh -c "cp $(which sh)/... $(which kubectl) /tmp"` — with no /bin/sh it
crashes StartError (verified on-cluster).
The hook exists ONLY to UPDATE CRDs on chart upgrades — it is NOT how CRDs are
first installed. The chart ships all 13 Velero CRDs in its native `crds/`
directory, which Helm applies unconditionally on install (before hooks),
independent of this flag; the CRDs are already present on-cluster from Helm's
crds/ handling. Setting `upgradeCRDs: false` drops the fragile external
kubectl-image dependency entirely while CRDs still install. Trade-off: Helm
won't manage crds/ after install, so CRD schema upgrades become a
manual/Renovate step; acceptable given Velero's CRDs are stable.
All other Velero values (BSL -> versitygw s3://velero, kopia FSB node-agent, the
two Schedules, the velero-cloud-credentials secret) are unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The velero chart's pre-install `velero-upgrade-crds` hook defaults its kubectl
image to docker.io/bitnami/kubectl, whose public Docker Hub catalog Bitnami
removed (Aug 2025). `docker.io/bitnami/kubectl:1.31` now 404s, leaving the hook
job in Init:ImagePullBackOff so Velero never installs (no Deployment,
node-agent, or BackupStorageLocation).
Set kubectl.image to the Rancher-maintained mirror docker.io/rancher/kubectl,
pinned to the cluster's exact k8s minor v1.31.5 (multi-arch amd64/arm64,
verified pullable via the Docker Hub registry API). All other Velero values
(BSL → versitygw s3://velero, kopia FSB node-agent, the two Schedules, the
velero-cloud-credentials secret) are unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Stand up a single-node/single-drive MinIO S3 endpoint on the Proxmox host as the
off-cluster backup target for Velero (R-STATE-03) and CloudNativePG (R-IDP-05).
Ansible (author + executed):
- roles/minio_backup_target + playbooks/backup-minio.yml — idempotent, additive only:
ZFS dataset Storage/k3s-backups (zstd, quota=100G, /mnt/Storage/k3s-backups, no
sharenfs); minio system user; pinned+checksummed MinIO/mc binaries (fetched on the
controller since the host has no WAN, copied to host); hardened systemd unit bound to
the host's cluster-reachable LAN IP (auto-discovered) on :9000; velero + cnpg buckets;
a non-root access key scoped by IAM policy to only those two buckets.
- inventory: new [proxmox_hosts] group ([email protected].2.102); overrides the cluster-wide
ansible_user. Does not disturb existing k3s node entries.
- group_vars/proxmox_hosts/vault.yml (ansible-vault): root + scoped MinIO creds.
GitOps hand-off:
- platform/backup/minio-credentials.sops.yaml (+ .example) — SOPS/age-encrypted endpoint +
scoped key/secret for the Velero/CNPG wiring (WS-STORAGE/WS-SEC). Not yet wired into a
kustomization (left for the consuming agents).
Verified live: dataset props correct; minio active+enabled bound to 192.168.1.9:9000;
S3 endpoint http://192.168.1.9:9000/minio/health/ready returns 200 from an in-cluster pod;
buckets velero+cnpg present; scoped key created+policy attached; re-run is idempotent.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The plural --allowed-groups does not exist in oauth2-proxy v7.8.1; the shared
oauth2-proxy new pod and the crafty auth sidecar both crashlooped on 'unknown flag'.
The flag is the singular, repeatable --allowed-group.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Add Crafty Controller 4 (registry.gitlab.com/crafty-controller/crafty-4:4.10.8)
as a platform component: a web panel that runs Java + Bedrock Minecraft servers as
subprocesses in one pod + a 20Gi Longhorn PVC (mounted 5x by subPath).
Auth = Option B (per-app oauth2-proxy reverse-proxy sidecar), since Cilium 1.16.5
cannot do ext_authz on the shared Gateway:
- oauth2-proxy v7.8.1 sidecar (:4180) reverse-proxies to Crafty's self-signed HTTPS
UI (127.0.0.1:8443), gated to Keycloak homelab realm group platform-admins.
- Confidential `crafty` client provisioned live via kcadm + captured in the realm
import; client secret + cookie secret via SOPS/age (mirrored in realm-clients).
- Web UI: HTTPRoute crafty.home.keithjackson.dev -> Service :80 -> sidecar :4180.
- Game ports: Cilium L2 LoadBalancer on VIP 192.168.1.55 (next free after .53/.54),
starter set TCP 25565-25567 (Java) + UDP 19132-19134 (Bedrock), NOT auth-gated.
- fsGroup:0 / runAsGroup:0 / runAsUser:1000 for the image's crafty:root identity on
the root:root Longhorn PVC (the seerr fsGroup lesson).
- Own non-gating Flux tier clusters/base/crafty.yaml (dependsOn platform-config,
wait:false) + sops-decryption patch in clusters/dev — a leaf UI must never gate
the platform.
- Explicit default-deny NetworkPolicy + CiliumNetworkPolicies (platform namespace,
not app-namespace, so Kyverno does not auto-generate the baseline).
make -C ci gate green; kustomize build of platform/crafty, clusters/base,
clusters/dev clean.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Build the deferred forward-auth ENFORCEMENT for non-OIDC UIs (pihole/*arr/
qbittorrent/homepage; Crafty next), gated by Keycloak via oauth2-proxy.
- helmrelease: add `--allowed-groups=platform-admins` (R-IDP-06 floor:
authenticated AND in group) + `--skip-provider-button` (302 straight to
Keycloak; verified the interstitial 403 sign-in page otherwise).
- forward-auth-cec.yaml: interim self-authored CiliumClusterwideEnvoyConfig
ext_authz listener -> oauth2-proxy /oauth2/auth, failure_mode_allow:false,
per-route opt-in via virtualHost. TEMPLATE — not Flux-wired (PM deploys with
an L2 VIP + DNS repoint). The ext_authz stanza is verified in-cluster.
- README: document the mechanism, why per-route ext_authz on the shared Gateway
is NOT clean on Cilium 1.16.5 (machine-owned cilium-gateway-shared CEC; native
ExternalAuth/GEP-1494 in no released Cilium), the three options + recommendation,
the opt-in steps, the in-cluster proof, and the human browser test.
Keycloak `oauth2-proxy` client already carries the callback redirect URI + a
bare `groups` claim (full.path=false) — no realm change needed.
Proof (cilium-envoy v1.30.8): a standalone envoy running this exact ext_authz
stanza against the live oauth2-proxy denied unauthenticated requests (403,
oauth2-proxy sign-in body; upstream never served), while a no-filter control
route on the same backend returned 200. R-IDP-02 property holds.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
