69a25cff827d6cab2cab3ed4287c59efabb587d2
9
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  jakman85andClaude Opus 5
|
d1a6628a97 |
feat(ha): the CNI dials the control-plane VIP — kube-vip becomes a CNI prerequisite
OPERATOR DECISION 2026-09-06: "use the VIP as intended — a virtual address to reach
the cluster and provide fault tolerant HA. Without a change it will not work in HA."
THE DEFECT. Cilium's kube-proxy replacement dialled a SINGLE NODE. Re-confirmed live
before changing anything: all three prod cilium-agent pods carried
KUBERNETES_SERVICE_HOST=192.168.2.10 — k3s-prod-1's own address — while the kube-vip
VIP 192.168.2.9 was Running on all three nodes with a held lease. Lose prod-1 and the
CNI's control-plane path is dead on an "HA" cluster. clusters/prod's own comment said
the value must be the VIP and NOT .10, then called it "Not yet decided" — I treated
that stale comment as an open question when the evidence already settled it.
SPLIT, NOT REPOINT, because k3s_api_host had two consumers with opposite needs:
k3s_api_host unchanged — the FOUNDER's IP: the cold-bootstrap join
target and a tls-san. infra/tofu/outputs.tf GENERATES this
name, so renaming would ripple into tofu and the runbooks.
k3s_apiserver_endpoint NEW = {{ kube_vip_address }} — the HA address; what Cilium
consumes. Derived, not restated, so an environment overrides
ONE line and the VIP, the SAN and the CNI endpoint move
together. Prod needed no new override.
THE SECOND HAZARD, WHICH MY BRIEF DID NOT NAME and the agent found: pointing Cilium at
the VIP breaks a COLD bootstrap for the same reason the join would — site.yml ran
node-baseline -> k3s -> cilium, so Cilium would install against an address nothing
announced yet. That is the 2026-09-01 deadlock shape. Fixed by SEQUENCE, not value:
site.yml now imports kube-vip.yml BETWEEN k3s and cilium. It cannot go earlier
(kube-vip is a k3s auto-deploy manifest, so it needs a cluster) and it works there
because the DaemonSet is hostNetwork with KUBERNETES_SERVICE_HOST=127.0.0.1 — needing
neither CNI nor kube-proxy. roles/kube_vip gained a read-only `wait_for` on the VIP so
a cold run stops THERE with a named cause instead of surfacing as unreachable agents.
Also fixed a pre-existing bug that only mattered once this play joined site.yml: the
role's read-only interface probe ran without `check_mode: false`, so under --check it
was skipped and the assert fired with a misleading "set kube_vip_interface explicitly".
VERIFIED BY ME, not just reported:
renders dev K3S_API_HOST=192.168.1.49 prod=192.168.2.9 (each environment's VIP)
cilium template consumes k3s_apiserver_endpoint, not k3s_api_host
cold join still `--server https://{{ k3s_api_host }}:6443` — the founder
order site.yml: node-baseline -> k3s -> kube-vip -> cilium -> verify -> flux
gate full CI gate PASS
Agent-side, additionally: in-memory render of cilium-values.yaml.j2 per host showing
k8sServiceHost=the VIP with the join still on the founder; k3s_tls_sans renders
['.10','.9','127.0.0.1','.11','.12'] so NO cert reissue and NO k3s restart is involved
— .9 already answers under full CA verification; and --check --diff of kube-vip.yml
against prod reported 6 ok / 0 changed, i.e. the role edits change nothing about the
kube-vip prod already runs.
ha-control-plane-as-code 92 -> 112 assertions, turning two escalations into machine
checks: the Cilium template must use the endpoint var; the endpoint must derive from
kube_vip_address and k3s_api_host must not; per environment K3S_API_HOST must equal
that environment's VIP and be none of its node IPs (the [parity] contract, now
machine-checked rather than a comment); site.yml must order k3s -> kube-vip -> cilium.
Every new assertion mutation-tested and bites. One honest negative recorded: reverting
only the BASE default is not caught, because both overlays patch the key — the check
reads effective per-environment values, so the base default is unguarded.
APPLY ORDER, and this is the operator's step — nothing was applied:
PROD FIRST, and it is the low-risk direction (prod is the broken one). Push and let
Flux reconcile platform/cilium: the value change rolls the cilium-agent DaemonSet
ONE NODE AT A TIME (maxUnavailable: 1 — the knob that bounded the 2026-09-01
incident), it will not proceed past an unready pod, existing datapath survives an
agent restart, and .9 is already live before the change lands.
DEV SEPARATELY, operator present. Same mechanics but live dev agents dial
192.168.1.50, and dev is mid-DNS-migration on dev-live. Do not fold it into that.
ANSIBLE: nothing to run for either live cluster; the Ansible half matters only for a
cold build. Remove the now-redundant standalone kube-vip.yml step from any runbook.
NEW NAMED GAP, unwritten: the L2 test cannot assert the running agents' live
KUBERNETES_SERVICE_HOST, which is the drift the L0 check cannot see. Recorded in that
test's gap list.
Refs R-PLAT-01, R-NET-01, R-ENV-02.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
c8c1d2935d |
feat(dns): per-environment BASE_DOMAIN — prod moves to its own subdomain
INCIDENT FIX. Prod's external-dns DELETED EVERY ONE OF DEV'S PUBLIC DNS RECORDS. Both
clusters ran policy: sync against the SAME Cloudflare zone with the SAME implicit
txtOwnerId (`default`), so prod believed it owned dev's records, found no matching sources,
and removed them plus their TXT registry entries. Dev recovered ~30s after prod was scaled
to 0; verified restored against Cloudflare directly (my first check went through a pfSense
override and falsely showed healthy — local resolvers are not evidence about public DNS).
THE MISS WAS MINE, and it was a failure of imagination in how I briefed every agent. I put
"never touch dev" in brief after brief and enforced it — separate kubeconfigs, verified
--limit, sha-checked dev's kubeconfig before and after. Every one of those guards held. NONE
of them covered SHARED EXTERNAL RESOURCES. Prod reconciling its OWN correctly-authored
manifests reached across a third party and destroyed dev's state. Cluster-to-cluster
isolation was verified; the dependency that mattered was cluster-to-Cloudflare.
Operator's architecture: dev -> *.dev.home.keithjackson.dev, prod ->
*.prod.home.keithjackson.dev, apex CNAME <svc>.home -> <svc>.prod.home.
PHASE 1 ONLY (this commit): prod moves to its own subdomain. DEV IS NOT MIGRATED and its
effective hostname stays home.keithjackson.dev, so dev renders byte-identically and nothing
live moves. That alone ends the collision and unblocks prod. Phase 2 (dev -> dev.home. +
apex CNAMEs) is deferred to when the operator is present: it relocates Keycloak's issuer and
12 clients' redirect URIs, forces a rolling k3s restart and kubectl SSO re-issue for every
user, and moves gitea.home. — which is BOTH the GitOps source and the current push target.
BASE_DOMAIN WAS A DEAD KNOB — it existed in cluster-vars but the status report flagged it as
referenced by nothing, because hostnames were hardcoded throughout. Now real: 141 refs.
Searched the AUTHORITATIVE reconciled set by resolving each Flux spec.path transitively via
conformance/lib/status.py — the same resolver the L0 gate uses, so "what Flux reconciles"
has one definition. 185 occurrences across 47 files in 154 reconciled files. Tokenized:
Gateway listeners, the wildcard Certificate, coredns-custom, external-dns, Keycloak
instance/realm (26 redirect URIs), oauth2-proxy, Grafana OIDC, all HTTPRoutes, Homepage's 15
links, 30 runbook_urls, unifi cloud-init, render.py's ZONE constant (which drove
--oidc-issuer-url/--cookie-domain/--whitelist-domain on every forward-auth sidecar) and 11
catalog/ ServiceDefinitions re-rendered canonically. Left alone: 43 comment/prose
occurrences and non-reconciled paths.
TWO THAT CANNOT BE TOKENIZED, flagged not forced:
- headlamp's OIDC URLs live inside a SOPS-encrypted Secret; re-encrypting rewrites the MAC
over every value and the OFFLINE harness cannot verify it (kustomize does not decrypt),
so an error would break live-dev SSO with no pre-flight proof. Prod needs its own copy
anyway — client secrets are realm-scoped.
- kube-apiserver --oidc-issuer-url is a k3s SERVER FLAG, not a manifest, so Flux can never
reach it. Done on the inventory seam instead (k3s_base_domain -> k3s_oidc_issuer_url,
overridden in group_vars/k3s_prod). Verified per host: dev keeps the default, prod gets
prod.home.
EXTERNAL-DNS OWNER, the actual incident cause: txtOwnerId is now explicit per environment —
dev renders exactly `default` (the chart default it was already using, so its existing
records stay recognised) and prod gets `prod`. The BASE default is a NON-COLLIDING SENTINEL,
deliberately not `default`, so a future environment that forgets the knob owns nothing and
can delete nothing rather than silently inheriting dev's identity.
I OVERRODE ONE AGENT DECISION against our own prior finding: it narrowed prod's
domainFilters to prod.home.keithjackson.dev as defence in depth. FINDING F-DNS1
(DECISIONS-LOG 2026-08-17) already proved a subdomain filter DROPS THE PARENT ZONE —
ExternalDNS generates the record then skips it with "no hosted zone matching record DNS
Name". Prod would have published NOTHING. Set to the ZONE (keithjackson.dev) like dev.
Isolation comes from the subdomain split plus txtOwnerId, which is what the incident
actually needed and what a domain filter cannot provide.
DEV PROVEN UNCHANGED: 11 of 12 substituting paths byte-identical; the 12th differs by
exactly one line, `+ txtOwnerId: default` — the value dev was already using implicitly.
POSITIVE CONTROLS confirm the harness is not blind: perturbing BASE_DOMAIN moves 10 of 12
hashes (the 2 that don't provably contain no hostname), perturbing the owner id moves
exactly 1. Prod's rendered output has ZERO home.keithjackson.dev references outside prod.,
and its cert renders *.prod.home.keithjackson.dev — no overlap with dev's.
L0 substitution assertions 106 -> 254; BASE_DOMAIN is no longer flagged dead. Gate PASS.
PROD REMAINS SUSPENDED (platform + 10 downstream tiers) pending review; nothing applied.
Serves: R-ENV-02, R-DNS-01, R-DNS-02, R-DNS-03, R-TLS-01.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
05baae90ec |
feat(prod): kernel fix + disk layout — prod nodes ready for k3s
Prod is being stood up now, without waiting for node 2's RAM upgrade. Three coupled
changes, all applied and verified on all three nodes.
=== 1. KERNEL >= 6.13 — now a PREREQUISITE, not a nice-to-have ===
A k3s SERVER that intermittently boots with 2.6 GiB is not a degraded node; it fails under
etcd plus its workload share, unpredictably, on any reboot. Fixed before k3s goes on.
roles/node_baseline gains a `kernel`-tagged block: asserts the suite matches the node's
Debian release, writes a deb822 trixie-backports source, installs, reads back the exact
version, writes a provenance/rollback note to the node. Scoped by
node_baseline_backports_kernel (default FALSE, true only in group_vars/k3s_prod) — chosen
over a hostname test so a fourth prod node inherits it from group membership. Verified:
--check against dev skips all 8 tasks on all 3 hosts. Two deliberate calls: `state: latest`
not `present` (linux-image-amd64 was already installed from main, so `present` would have
silently fixed nothing), and NO preferences.d pin (backports' NotAutomatic +
ButAutomaticUpgrades already gives 100/500; an explicit Pin-Priority: 100 would switch OFF
automatic security upgrades for the very kernel being installed).
Installed 7.1.8+deb13-amd64 on all three; 6.12.107 kept bootable.
THE DECISIVE PROOF: node 2 booted at MEMATTR=0xbeeb0018 — the EXACT address that gave it
2.6 GiB twice — and now reserves 634,904K instead of 13,958,980K. MemTotal 15.4 GiB. Same
address, handled correctly; not a lucky draw.
§0b's claim that a fixed kernel prints 'FW_BUG Corrupted...' is CONDITIONAL and was
corrected: >=6.13 has three rejection gates and only the third prints that line; all three
nodes hit gate 1 (version > 2). Proof instead is boot-independent — decompressing
/boot/vmlinuz on all three yields the FW_BUG and descriptor-size strings verbatim; neither
exists in 6.12.
TWO MORE BUGS IN MY OWN HEALTH CHECK, found because the fix couldn't otherwise be shown:
- MEMATTR_VERSION_RE matched (\d+) but the kernel prints that field with %d — SIGNED. Node
2's real value was -1569980416, which did not match, so state fell through to `clean` and
the node reported PASS "the kernel accepted it without complaint". A FALSE PASS on the
exact bug the check exists to find. Now (-?\d+).
- bad_version was WARN unconditionally, so a FIXED node would have stayed WARN forever.
Now keys on memattr_kernel_fixed: same line, WARN below 6.13, PASS at/above.
=== 2. DISK LAYOUT — Longhorn claimed, per-node paths DISCOVERED not hardcoded ===
Operator decision: reuse the ~424 GB partition; accept the shared-device I/O risk (dev's
etcd/Longhorn contention was on a spinning HDD, prod is SSD/NVMe).
Device paths differ per node (sda5 / nvme0n1p5 / sda5), so the role DISCOVERS the partition
via `findmnt --mountpoint` on a declared claim mountpoint rather than trusting inventory.
Per-host host_vars would have frozen today's hardware into inventory, where it goes stale on
the first re-image and the stale value's failure mode is mkfs on the WRONG partition.
Eleven fail-closed asserts before any write: real block device, not backing / /boot /usr
/var /home /tmp or active swap (built from the node's OWN gathered facts, never a hardcoded
list), already ext4, no foreign label, >= 100 GiB, and empty. Relabel, never reformat.
/srv verified empty first on every node (ls -A -> lost+found only; du 20K; the "5.1% used"
was ext4's default 5% root reserve).
=== 3. k3s DATA-DIR MOVED — /var was 11.8 GiB and would have killed etcd ===
Measured on the fully-deployed dev cluster: containerd 21-25 GB/node, /var total 58-70 GB.
Prod's /var is 11.8 GiB and held BOTH etcd and the image store, so prod would have filled
/var during its first image pulls — and a full /var means etcd cannot write its WAL. Cluster
death, not degradation, arriving during bring-up. Invisible when the disk decision was made,
because "etcd on root" sounded like the 30 GiB / rather than a separate 12 GiB /var.
Now: p5 -> /data (LABEL=k3s-data), with /data/longhorn and /data/k3s. Neutral names chosen
deliberately — the partition now has two tenants, and reusing /srv would make "claimed" and
"unclaimed" indistinguishable to the idempotency pivot, while a bare `data` label would make
a stranger's `data` volume look already-claimed and weaken an assert.
The transition off the existing LABEL=longhorn mount is DECLARED, not inferred
(node_baseline_data_retired_fs_label/_retired_mount, defaults ""), because changing the label
makes a claimed node answer "no" to the pivot and walk into the greenfield path. Self-retiring
once blkid -L k3s-data succeeds. THREE independent gates keep live dev out: retired vars
default ""; gated on longhorn_source == claim-mountpoint (dev is `device`); and the emptiness
assert fails closed on dev's 18 volumes even if both were defeated.
k3s_data_dir is one variable read by two roles (k3s_server --data-dir; node_baseline derives
the etcd mount). Role default is k3s's own default, so dev is unchanged and keeps its
dedicated etcd device. node_baseline_etcd_source becomes `shared-data-partition` and is
LOAD-BEARING: the role asserts per run that the filesystem backing the etcd dir really IS the
data partition — had the mount silently failed, etcd plus 21-25 GB of images would land back
on the OS filesystem invisibly until the disk filled.
LONGHORN_DATA_PATH is a new cluster-vars knob (R-ENV-02): base and DEV /var/lib/longhorn,
prod /data/longhorn.
DEV PROVEN UNCHANGED, which is the property that mattered — the live cluster has 18 Longhorn
volumes on that path. All 12 substituting Flux paths rendered through
`kubectl kustomize | flux envsubst --strict` for both trees: 12/12 per-file SHA-256 identical
and an identical aggregate SHA over every rendered dev byte. With a POSITIVE CONTROL showing
the same harness detects prod changing on exactly one line — an all-identical result is
worthless if the harness cannot see change. Live check after: dev's default-data-path setting
still /var/lib/longhorn, 18 volumes attached, 0 Kustomizations unready.
Idempotent: run 2 is changed=0 on all three nodes. Also fixed a real tag bug — include_tasks
does NOT propagate its own tags to included tasks (unlike import_tasks), so `--tags disks`
selected the include and ran nothing inside it while reporting success.
OPEN DEFECTS, tracked not forgotten: node 2's warm-reboot hang (one clean reboot since, NOT a
fix); and node 3 runs dhcpcd for its wifi interface, which rewrites /etc/resolv.conf on lease
renewal — the role's `contended` detection checks resolvconf and NetworkManager only, so node
3's decided resolvers will silently revert.
Gate: MERGE GATE: PASS. L0 substitution check 106 assertions.
Serves: R-ENV-01, R-ENV-02, R-ENV-03, R-STATE-01, R-STATE-02, R-PLAT-01. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
e623d27e2d |
feat(ansible): parameterise target groups so prod reuses the roles unchanged (R-ENV-02)
roles/k3s_server, roles/cilium and every node-host playbook hardcoded the dev group
names k3s_primary/k3s_secondary/k3s_servers, so the prod inventory groups could not be
selected at all. That broke the R-ENV-02 promise that prod reuses the SAME roles, and
blocked PROD-PROVISIONING.md §6 outright.
TWO KNOBS, deliberately separate — Ansible templates a play's `hosts:` BEFORE any host
context exists, so group_vars is unreadable there, while roles run WITH host context:
* which hosts a play RUNS ON — k3s_hosts, k3s_primary_hosts/k3s_secondary_hosts
(k3s.yml's split), vpn_egress_gateway_hosts; each `| default(<dev group>)`, set by -e
only. Follows node-health.yml's established `<name>_hosts | default(dev)` pattern.
* which group a ROLE means by "my primary"/"my servers" — k3s_primary_group,
k3s_servers_group in group_vars/all.yml (dev), overridden in group_vars/k3s_prod.
Follows the k3s_api_host convention already in this repo. No per-run flag.
DEV IS UNCHANGED — the key evidence. --list-hosts/--list-tasks/--syntax-check captured
for all 9 playbooks at HEAD and after: sorted host lists IDENTICAL for all 9, same
primary/secondary split, same 6-play site.yml. (Raw --list-hosts PRINT ORDER varies run
to run; proven to be Ansible's own set ordering by running UNMODIFIED HEAD cilium.yml
four times -> 3,1,2 / 1,3,2 / 1,2,3 / 1,2,3. Hence sorted comparison.) --list-tasks
differs in exactly two files, only by added TAGS annotations and one new assert; no task
reordered, renamed or removed. Var resolution verified per environment with -c local:
dev -> k3s_primary/192.168.1.50/sans .50,.49,127.0.0.1,.51,.52; prod ->
k3s_prod_primary/192.168.2.10/vip .9/sans .10,.9,127.0.0.1,.11,.12.
BREAKS THE SMARTMONTOOLS CIRCULAR DEPENDENCY. node_baseline tasks are now tagged
packages/system/disks, so the package install can run alone:
ansible-playbook playbooks/node-baseline.yml -e k3s_hosts=k3s_prod --tags packages
Skipping is the guard — no disks-tagged task is selected, so the
BLOCKED-pending-disk-decision paths are never templated, let alone passed to mkfs.
Belt-and-braces, a new disks-tagged assert fires first in a FULL run and names §2
explicitly instead of failing obscurely at mkfs. `tags: never` was deliberately NOT used
(it would change the default run).
FOOTGUN FOUND AND FIXED: roles/cilium, cluster_verify and flux_bootstrap all hardcoded
.cache/dev.kubeconfig — the exact file infra/devcontainer/dev.sh exports as $KUBECONFIG.
Once prod became targetable, a prod cilium/verify run would have SILENTLY OVERWRITTEN it,
leaving the operator's kubectl quietly answering from PROD. Now cluster_kubeconfig_name
(dev.kubeconfig -> prod.kubeconfig). Dev path byte-identical.
KNOWN, DOCUMENTED, NOT FIXED HERE: flux-bootstrap.yml retargets but roles/flux_bootstrap
shells out to bootstrap/flux/bootstrap.sh with a hardcoded --path=clusters/dev — a
bootstrap/ subtree change, not a target-group change (§6, cross-referenced to §7).
vpn.egress.gateway.yml is parameterised but prod has no egress group yet and would need
its own vaulted PIA credentials. --check against prod is still impossible until the prod
vault exists — even the packages-only run needs it.
Nothing was run against the dev cluster: --list-hosts/--list-tasks/--syntax-check, plus
debug/assert with -c local, only.
Serves: R-ENV-01, R-ENV-02, R-ENV-03. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 4.8
|
cbc2301b30 |
docs: reconcile docs/comments with post-upgrade cluster state
Text-only cleanup after the upgrade campaign. Updates stale version strings, prose, and comments to the verified current facts; no Kubernetes behavior or version pins changed except the kubectl toolchain bump (below). Verified facts applied: k3s v1.36.4+k3s1, Debian 13 trixie, Cilium 1.20.1 / Gateway API v1.6.1, Longhorn 1.12.1, node RAM 24 GiB, dedicated virtio2 SSD etcd disk per node, Velero chart 12.x / v1.18, Grafana 13.2.0. - Version strings across infra/ and platform/ READMEs + comments - kubectl toolchain 1.31.4 -> 1.36.4 (devcontainer/ci/conformance versions.env; 1.31 vs a 1.36 cluster exceeded the +-1 skew) - Retired-single-apps-Kustomization refs -> apps-wave-0/1/2 + apps-vms with per-wave SOPS decryption (flux/clusters docs + bootstrap.sh) - COMPLETED/historical banners on the three executed plan docs - Resolved TODO(WS-SEC) markers -> Renovate-maintained ranges - Appended dated DECISIONS-LOG entry (2026-08-30) superseding the 2026-08-26 LIVE STATE line Left as revalidation items (not blind-edited): external-snapshotter v8.2.0 vs 1.36, Cilium ext_authz/forward-auth relevance under 1.20.1, conformance ImageVolume feature-gate assertions under 1.36. Co-Authored-By: Claude Opus 4.8 <[email protected]> |
||
|
jakman85andClaude Opus 4.8
|
7a59ef07bb |
Upgrade complete: pin k3s_version v1.31.5 -> v1.36.4+k3s1
Cluster upgraded 1.31.5 -> 1.36.4 over 5 sequential minor hops (binary-swap per node, leader-last, Longhorn rebuild-freeze). Components: Cilium 1.16.5->1.20.1, Longhorn 1.7.3->1.12.1, GW-API CRDs ->v1.6.1, etcd 3.5->3.6. All validated; data intact. Co-Authored-By: Claude Opus 4.8 <[email protected]> |
||
|
jakman85andClaude Opus 4.8
|
60a58f01ad |
feat(infra): kube-vip control-plane HA VIP (192.168.1.49) + API tls-san
Add an HA control-plane API VIP for the k3s cluster with kube-vip, and add the VIP + all node IPs to the kube-apiserver serving-cert SANs so TLS via the VIP validates. Prepares the stable failover endpoint the operator fronts with a pfSense port-forward to 192.168.1.49:6443. roles/kube_vip + playbooks/kube-vip.yml: - Templates a single manifest (RBAC + DaemonSet kube-vip-ds) into each server's k3s auto-deploy dir (/var/lib/rancher/k3s/server/manifests) so it is reproducible and independent of Flux; k3s auto-applies it. - Control-plane ONLY (cp_enable=true, svc_enable=false): Cilium keeps ownership of Service LoadBalancing (L2 pool .53-.60) — no ARP conflict. - Runs on control-plane nodes (nodeSelector node-role.kubernetes.io/control-plane), hostNetwork, NET_ADMIN/NET_RAW, image pinned ghcr.io/kube-vip/kube-vip:v0.8.9. - vip_interface auto-detected per node (the iface holding 192.168.1.5x = eth0). - Leader election (plndr-cp-lock) with 15/10/2s lease timings. - This cluster runs without kube-proxy (Cilium replacement), so a hostNetwork pod cannot reach the kubernetes ClusterIP; kube-vip is pointed at the node-local apiserver (KUBERNETES_SERVICE_HOST=127.0.0.1:6443) so leader election works. roles/k3s_server tls-san: - New k3s_tls_sans (VIP + all three node IPs + 127.0.0.1, deduped); install args now emit one --tls-san per entry. - Persist the SAN list to /etc/rancher/k3s/config.yaml (read by a running k3s) and Restart k3s handler so an existing cluster regenerates its serving cert. - k3s.yml secondaries run serial:1 so a SAN change rolls one node at a time, keeping etcd quorum (kube-vip keeps the API reachable during each restart). Verified live: DS 3/3 ready, VIP answers on 192.168.1.49:6443, all 3 certs and an s_client against the VIP carry 192.168.1.49 + .50/.51/.52 + 127.0.0.1, all nodes Ready throughout the rolling restart. Co-Authored-By: Claude Opus 4.8 <[email protected]> |
||
|
jakman85andClaude Opus 4.8
|
4cc04147a2 |
fix(k3s): disable local-storage so Longhorn is the sole default StorageClass
The deployed cluster has TWO default StorageClasses — k3s's built-in local-path AND longhorn — which is ambiguous for PVCs without an explicit class. Longhorn (ADR-0003) is the cluster storage, so add local-storage to k3s --disable. Effective on fresh installs (the k3s install task is idempotent → no restart of the running cluster); the running dev cluster keeps both defaults harmlessly (all platform PVCs pin storageClassName: longhorn). Rebuilds get a single default. Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 4.8
|
f2a7e42068 |
Phase 1 (author-only): node provisioning IaC — tofu + cloud-init + Ansible (T-1.1/1.2/1.3)
OpenTofu libvirt module (k3s-dev NAT 10.73.0.0/24, 3x 6GiB/4vCPU VMs, 20G OS +
40G thin data, host-passthrough), cloud-init baseline (k3s/Cilium/Longhorn
prereqs, static net), Ansible k3s-HA + Cilium (kube-proxy replacement, Gateway
API, Hubble; flannel/kube-proxy/Traefik disabled). PM fix: escape ${...} in a
cloud-init template comment (tofu templatefile parse). tofu fmt/init/validate =
Success; ansible --syntax-check + yamllint pass. NOTHING executed (no apply).
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|