OPERATOR DECISION 2026-09-06: "use the VIP as intended — a virtual address to reach
the cluster and provide fault tolerant HA. Without a change it will not work in HA."
THE DEFECT. Cilium's kube-proxy replacement dialled a SINGLE NODE. Re-confirmed live
before changing anything: all three prod cilium-agent pods carried
KUBERNETES_SERVICE_HOST=192.168.2.10 — k3s-prod-1's own address — while the kube-vip
VIP 192.168.2.9 was Running on all three nodes with a held lease. Lose prod-1 and the
CNI's control-plane path is dead on an "HA" cluster. clusters/prod's own comment said
the value must be the VIP and NOT .10, then called it "Not yet decided" — I treated
that stale comment as an open question when the evidence already settled it.
SPLIT, NOT REPOINT, because k3s_api_host had two consumers with opposite needs:
k3s_api_host unchanged — the FOUNDER's IP: the cold-bootstrap join
target and a tls-san. infra/tofu/outputs.tf GENERATES this
name, so renaming would ripple into tofu and the runbooks.
k3s_apiserver_endpoint NEW = {{ kube_vip_address }} — the HA address; what Cilium
consumes. Derived, not restated, so an environment overrides
ONE line and the VIP, the SAN and the CNI endpoint move
together. Prod needed no new override.
THE SECOND HAZARD, WHICH MY BRIEF DID NOT NAME and the agent found: pointing Cilium at
the VIP breaks a COLD bootstrap for the same reason the join would — site.yml ran
node-baseline -> k3s -> cilium, so Cilium would install against an address nothing
announced yet. That is the 2026-09-01 deadlock shape. Fixed by SEQUENCE, not value:
site.yml now imports kube-vip.yml BETWEEN k3s and cilium. It cannot go earlier
(kube-vip is a k3s auto-deploy manifest, so it needs a cluster) and it works there
because the DaemonSet is hostNetwork with KUBERNETES_SERVICE_HOST=127.0.0.1 — needing
neither CNI nor kube-proxy. roles/kube_vip gained a read-only `wait_for` on the VIP so
a cold run stops THERE with a named cause instead of surfacing as unreachable agents.
Also fixed a pre-existing bug that only mattered once this play joined site.yml: the
role's read-only interface probe ran without `check_mode: false`, so under --check it
was skipped and the assert fired with a misleading "set kube_vip_interface explicitly".
VERIFIED BY ME, not just reported:
renders dev K3S_API_HOST=192.168.1.49 prod=192.168.2.9 (each environment's VIP)
cilium template consumes k3s_apiserver_endpoint, not k3s_api_host
cold join still `--server https://{{ k3s_api_host }}:6443` — the founder
order site.yml: node-baseline -> k3s -> kube-vip -> cilium -> verify -> flux
gate full CI gate PASS
Agent-side, additionally: in-memory render of cilium-values.yaml.j2 per host showing
k8sServiceHost=the VIP with the join still on the founder; k3s_tls_sans renders
['.10','.9','127.0.0.1','.11','.12'] so NO cert reissue and NO k3s restart is involved
— .9 already answers under full CA verification; and --check --diff of kube-vip.yml
against prod reported 6 ok / 0 changed, i.e. the role edits change nothing about the
kube-vip prod already runs.
ha-control-plane-as-code 92 -> 112 assertions, turning two escalations into machine
checks: the Cilium template must use the endpoint var; the endpoint must derive from
kube_vip_address and k3s_api_host must not; per environment K3S_API_HOST must equal
that environment's VIP and be none of its node IPs (the [parity] contract, now
machine-checked rather than a comment); site.yml must order k3s -> kube-vip -> cilium.
Every new assertion mutation-tested and bites. One honest negative recorded: reverting
only the BASE default is not caught, because both overlays patch the key — the check
reads effective per-environment values, so the base default is unguarded.
APPLY ORDER, and this is the operator's step — nothing was applied:
PROD FIRST, and it is the low-risk direction (prod is the broken one). Push and let
Flux reconcile platform/cilium: the value change rolls the cilium-agent DaemonSet
ONE NODE AT A TIME (maxUnavailable: 1 — the knob that bounded the 2026-09-01
incident), it will not proceed past an unready pod, existing datapath survives an
agent restart, and .9 is already live before the change lands.
DEV SEPARATELY, operator present. Same mechanics but live dev agents dial
192.168.1.50, and dev is mid-DNS-migration on dev-live. Do not fold it into that.
ANSIBLE: nothing to run for either live cluster; the Ansible half matters only for a
cold build. Remove the now-redundant standalone kube-vip.yml step from any runbook.
NEW NAMED GAP, unwritten: the L2 test cannot assert the running agents' live
KUBERNETES_SERVICE_HOST, which is the drift the L0 check cannot see. Recorded in that
test's gap list.
Refs R-PLAT-01, R-NET-01, R-ENV-02.
Co-Authored-By: Claude Opus 5 <[email protected]>
INCIDENT FIX. Prod's external-dns DELETED EVERY ONE OF DEV'S PUBLIC DNS RECORDS. Both
clusters ran policy: sync against the SAME Cloudflare zone with the SAME implicit
txtOwnerId (`default`), so prod believed it owned dev's records, found no matching sources,
and removed them plus their TXT registry entries. Dev recovered ~30s after prod was scaled
to 0; verified restored against Cloudflare directly (my first check went through a pfSense
override and falsely showed healthy — local resolvers are not evidence about public DNS).
THE MISS WAS MINE, and it was a failure of imagination in how I briefed every agent. I put
"never touch dev" in brief after brief and enforced it — separate kubeconfigs, verified
--limit, sha-checked dev's kubeconfig before and after. Every one of those guards held. NONE
of them covered SHARED EXTERNAL RESOURCES. Prod reconciling its OWN correctly-authored
manifests reached across a third party and destroyed dev's state. Cluster-to-cluster
isolation was verified; the dependency that mattered was cluster-to-Cloudflare.
Operator's architecture: dev -> *.dev.home.keithjackson.dev, prod ->
*.prod.home.keithjackson.dev, apex CNAME <svc>.home -> <svc>.prod.home.
PHASE 1 ONLY (this commit): prod moves to its own subdomain. DEV IS NOT MIGRATED and its
effective hostname stays home.keithjackson.dev, so dev renders byte-identically and nothing
live moves. That alone ends the collision and unblocks prod. Phase 2 (dev -> dev.home. +
apex CNAMEs) is deferred to when the operator is present: it relocates Keycloak's issuer and
12 clients' redirect URIs, forces a rolling k3s restart and kubectl SSO re-issue for every
user, and moves gitea.home. — which is BOTH the GitOps source and the current push target.
BASE_DOMAIN WAS A DEAD KNOB — it existed in cluster-vars but the status report flagged it as
referenced by nothing, because hostnames were hardcoded throughout. Now real: 141 refs.
Searched the AUTHORITATIVE reconciled set by resolving each Flux spec.path transitively via
conformance/lib/status.py — the same resolver the L0 gate uses, so "what Flux reconciles"
has one definition. 185 occurrences across 47 files in 154 reconciled files. Tokenized:
Gateway listeners, the wildcard Certificate, coredns-custom, external-dns, Keycloak
instance/realm (26 redirect URIs), oauth2-proxy, Grafana OIDC, all HTTPRoutes, Homepage's 15
links, 30 runbook_urls, unifi cloud-init, render.py's ZONE constant (which drove
--oidc-issuer-url/--cookie-domain/--whitelist-domain on every forward-auth sidecar) and 11
catalog/ ServiceDefinitions re-rendered canonically. Left alone: 43 comment/prose
occurrences and non-reconciled paths.
TWO THAT CANNOT BE TOKENIZED, flagged not forced:
- headlamp's OIDC URLs live inside a SOPS-encrypted Secret; re-encrypting rewrites the MAC
over every value and the OFFLINE harness cannot verify it (kustomize does not decrypt),
so an error would break live-dev SSO with no pre-flight proof. Prod needs its own copy
anyway — client secrets are realm-scoped.
- kube-apiserver --oidc-issuer-url is a k3s SERVER FLAG, not a manifest, so Flux can never
reach it. Done on the inventory seam instead (k3s_base_domain -> k3s_oidc_issuer_url,
overridden in group_vars/k3s_prod). Verified per host: dev keeps the default, prod gets
prod.home.
EXTERNAL-DNS OWNER, the actual incident cause: txtOwnerId is now explicit per environment —
dev renders exactly `default` (the chart default it was already using, so its existing
records stay recognised) and prod gets `prod`. The BASE default is a NON-COLLIDING SENTINEL,
deliberately not `default`, so a future environment that forgets the knob owns nothing and
can delete nothing rather than silently inheriting dev's identity.
I OVERRODE ONE AGENT DECISION against our own prior finding: it narrowed prod's
domainFilters to prod.home.keithjackson.dev as defence in depth. FINDING F-DNS1
(DECISIONS-LOG 2026-08-17) already proved a subdomain filter DROPS THE PARENT ZONE —
ExternalDNS generates the record then skips it with "no hosted zone matching record DNS
Name". Prod would have published NOTHING. Set to the ZONE (keithjackson.dev) like dev.
Isolation comes from the subdomain split plus txtOwnerId, which is what the incident
actually needed and what a domain filter cannot provide.
DEV PROVEN UNCHANGED: 11 of 12 substituting paths byte-identical; the 12th differs by
exactly one line, `+ txtOwnerId: default` — the value dev was already using implicitly.
POSITIVE CONTROLS confirm the harness is not blind: perturbing BASE_DOMAIN moves 10 of 12
hashes (the 2 that don't provably contain no hostname), perturbing the owner id moves
exactly 1. Prod's rendered output has ZERO home.keithjackson.dev references outside prod.,
and its cert renders *.prod.home.keithjackson.dev — no overlap with dev's.
L0 substitution assertions 106 -> 254; BASE_DOMAIN is no longer flagged dead. Gate PASS.
PROD REMAINS SUSPENDED (platform + 10 downstream tiers) pending review; nothing applied.
Serves: R-ENV-02, R-DNS-01, R-DNS-02, R-DNS-03, R-TLS-01.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
During the substitution incident a bad render (k8sServiceHost: "") took down TWO of three
Cilium agents simultaneously. The agents' `config` init container falls back to the API
ClusterIP, which only the Cilium agent itself can translate — and that agent is the one
being replaced — so it deadlocks on `dial tcp 10.43.0.1:443: i/o timeout`.
Root cause of the 2-at-once: `updateStrategy.rollingUpdate.maxUnavailable: 2` is the
UPSTREAM CHART DEFAULT, confirmed by downloading cilium-1.20.1.tgz and reading
values.yaml:437-444 — not a local choice, and not overridden anywhere in this repo.
maxUnavailable: 1 makes a rollout replace ONE agent at a time and stop at the first pod
that fails to become Ready. The whole value of the setting is that the rollout halts on
the first bad node instead of taking the majority of the dataplane with it, and that
guarantee only exists at 1. It matters far more on a cold PROD bootstrap, where there is
no healthy peer to recover from — dev only self-healed because k3s-dev-3 kept a working
agent throughout.
Set as a [parity] field in ALL THREE places, per this repo's documented contract that the
Ansible bootstrap values and the Flux HelmRelease values must agree on settings that
define cluster networking (Ansible installs Cilium at bootstrap; the HelmRelease adopts
it; the two layers fight otherwise):
platform/cilium/helmrelease.yaml (authoritative for Flux)
infra/ansible/roles/cilium/templates/cilium-values.yaml.j2 (authoritative for bootstrap)
platform/cilium/values.yaml (reference mirror, kept in sync)
Verified by rendering the .j2 with roles/cilium/defaults and diffing full value sets: every
[parity] field is byte-equal across all three; only k8sServiceHost differs, as designed
(${K3S_API_HOST} vs {{ k3s_api_host }}).
MERGING THIS IS NON-DISRUPTIVE. updateStrategy lives at DaemonSet.spec.updateStrategy — a
SIBLING of spec.template (chart daemonset.yaml:49-53). The DaemonSet controller decides a
pod is out of date by hashing spec.template alone, so the pod-template hash does not move,
no new ControllerRevision is created, and zero pods are recreated. Helm patches the field
in place. (If it were disruptive it would be self-defeating: rolling agents under the old
maxUnavailable: 2 in order to install maxUnavailable: 1.) Verify after reconcile with
`kubectl -n kube-system get ds cilium -o jsonpath='{.spec.updateStrategy.rollingUpdate.maxUnavailable}'`
plus unchanged pod ages — that is the cleanest proof nothing rolled.
Trade-off recorded in the comments: upgrades serialise, roughly two waves to three at 3
nodes (a minute or two). On a large cluster this becomes painful and a percentage such as
"10%" would be right — noted so a future larger cluster revisits it deliberately.
SCOPE: this bounds blast radius, it does NOT close the substitution race. A bad render
still ships; it now breaks one node and stalls rather than taking the majority.
platform.dependsOn: [flux-system] (P0) is the fix for the cause.
Serves: R-PLAT-01, R-NET-01.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
roles/k3s_server, roles/cilium and every node-host playbook hardcoded the dev group
names k3s_primary/k3s_secondary/k3s_servers, so the prod inventory groups could not be
selected at all. That broke the R-ENV-02 promise that prod reuses the SAME roles, and
blocked PROD-PROVISIONING.md §6 outright.
TWO KNOBS, deliberately separate — Ansible templates a play's `hosts:` BEFORE any host
context exists, so group_vars is unreadable there, while roles run WITH host context:
* which hosts a play RUNS ON — k3s_hosts, k3s_primary_hosts/k3s_secondary_hosts
(k3s.yml's split), vpn_egress_gateway_hosts; each `| default(<dev group>)`, set by -e
only. Follows node-health.yml's established `<name>_hosts | default(dev)` pattern.
* which group a ROLE means by "my primary"/"my servers" — k3s_primary_group,
k3s_servers_group in group_vars/all.yml (dev), overridden in group_vars/k3s_prod.
Follows the k3s_api_host convention already in this repo. No per-run flag.
DEV IS UNCHANGED — the key evidence. --list-hosts/--list-tasks/--syntax-check captured
for all 9 playbooks at HEAD and after: sorted host lists IDENTICAL for all 9, same
primary/secondary split, same 6-play site.yml. (Raw --list-hosts PRINT ORDER varies run
to run; proven to be Ansible's own set ordering by running UNMODIFIED HEAD cilium.yml
four times -> 3,1,2 / 1,3,2 / 1,2,3 / 1,2,3. Hence sorted comparison.) --list-tasks
differs in exactly two files, only by added TAGS annotations and one new assert; no task
reordered, renamed or removed. Var resolution verified per environment with -c local:
dev -> k3s_primary/192.168.1.50/sans .50,.49,127.0.0.1,.51,.52; prod ->
k3s_prod_primary/192.168.2.10/vip .9/sans .10,.9,127.0.0.1,.11,.12.
BREAKS THE SMARTMONTOOLS CIRCULAR DEPENDENCY. node_baseline tasks are now tagged
packages/system/disks, so the package install can run alone:
ansible-playbook playbooks/node-baseline.yml -e k3s_hosts=k3s_prod --tags packages
Skipping is the guard — no disks-tagged task is selected, so the
BLOCKED-pending-disk-decision paths are never templated, let alone passed to mkfs.
Belt-and-braces, a new disks-tagged assert fires first in a FULL run and names §2
explicitly instead of failing obscurely at mkfs. `tags: never` was deliberately NOT used
(it would change the default run).
FOOTGUN FOUND AND FIXED: roles/cilium, cluster_verify and flux_bootstrap all hardcoded
.cache/dev.kubeconfig — the exact file infra/devcontainer/dev.sh exports as $KUBECONFIG.
Once prod became targetable, a prod cilium/verify run would have SILENTLY OVERWRITTEN it,
leaving the operator's kubectl quietly answering from PROD. Now cluster_kubeconfig_name
(dev.kubeconfig -> prod.kubeconfig). Dev path byte-identical.
KNOWN, DOCUMENTED, NOT FIXED HERE: flux-bootstrap.yml retargets but roles/flux_bootstrap
shells out to bootstrap/flux/bootstrap.sh with a hardcoded --path=clusters/dev — a
bootstrap/ subtree change, not a target-group change (§6, cross-referenced to §7).
vpn.egress.gateway.yml is parameterised but prod has no egress group yet and would need
its own vaulted PIA credentials. --check against prod is still impossible until the prod
vault exists — even the packages-only run needs it.
Nothing was run against the dev cluster: --list-hosts/--list-tasks/--syntax-check, plus
debug/assert with -c local, only.
Serves: R-ENV-01, R-ENV-02, R-ENV-03. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Text-only cleanup after the upgrade campaign. Updates stale version
strings, prose, and comments to the verified current facts; no
Kubernetes behavior or version pins changed except the kubectl
toolchain bump (below).
Verified facts applied: k3s v1.36.4+k3s1, Debian 13 trixie,
Cilium 1.20.1 / Gateway API v1.6.1, Longhorn 1.12.1, node RAM 24 GiB,
dedicated virtio2 SSD etcd disk per node, Velero chart 12.x / v1.18,
Grafana 13.2.0.
- Version strings across infra/ and platform/ READMEs + comments
- kubectl toolchain 1.31.4 -> 1.36.4 (devcontainer/ci/conformance
versions.env; 1.31 vs a 1.36 cluster exceeded the +-1 skew)
- Retired-single-apps-Kustomization refs -> apps-wave-0/1/2 + apps-vms
with per-wave SOPS decryption (flux/clusters docs + bootstrap.sh)
- COMPLETED/historical banners on the three executed plan docs
- Resolved TODO(WS-SEC) markers -> Renovate-maintained ranges
- Appended dated DECISIONS-LOG entry (2026-08-30) superseding the
2026-08-26 LIVE STATE line
Left as revalidation items (not blind-edited): external-snapshotter
v8.2.0 vs 1.36, Cilium ext_authz/forward-auth relevance under 1.20.1,
conformance ImageVolume feature-gate assertions under 1.36.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Gateway API CRDs bumped v1.2.1->v1.3.0 (required by Cilium 1.18; applied server-side).
Land on current k8s 1.32 before the 1.33 hop.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Land the two pacing components on current k8s 1.31 before the 1.32 k3s hop.
Cilium 1.17 supports k8s 1.29-1.32; Longhorn 1.8 supports 1.25+; Gateway API CRDs
stay v1.2.1 (Cilium 1.17 targets v1.2.x). Also commits the full upgrade plan doc.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Controller now reaches the kube-API directly through the pfSense NAT
(192.168.2.50:6443 -> kube-vip VIP 192.168.1.49:6443), validating TLS
against the VIP via tls-server-name. Removes the dev.sh SSH-tunnel
scaffolding and updates the ansible source-of-truth so a rebuild
regenerates a direct-access kubeconfig.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
jakman85andClaude Opus 5