`platform-config` applied the CDI CR *and* cdi-storageprofiles.yaml in ONE pass.
StorageProfile's CRD does not exist until cdi-operator reconciles that CR, and
Flux server-side dry-runs every object before applying any — so the unknown kind
aborted the tier, the CR was never applied, the CRD was never created, and the
tier could NEVER converge. Observed on prod: cdi-operator Available 12h, no CDI
CR, no storageprofiles CRD, every downstream tier blocked.
The profiles now live in their own tier ./platform-config-cdi with
dependsOn: platform-config and wait: true. Because dependsOn is REVISION-gated
and platform-config runs wait: true, the CDI CR must be applied AND healthy —
exactly the event that creates the CRD — before the profiles are applied. Cold
clusters order themselves. `standup.sh crds` is retained as a fallback for
clusters already stuck, and because it is idempotent.
THE GENERALISABLE RULE (recorded in clusters/README.md): a CR whose CRD is
created by a CONTROLLER AT RUNTIME is second-order and needs its own pass.
cdi-operator.yaml registers exactly ONE CRD (cdis.cdi.kubevirt.io); storageprofiles,
datavolumes, datasources and dataimportcrons appear only after it reconciles the
CDI CR. An audit found StorageProfile is the only second-order kind in
platform-config — KubeVirt, CDI, KeycloakRealmImport, CNPG Cluster,
VolumeSnapshotClass, ClusterIssuer, PrometheusRule, ServiceMonitor and the Cilium
L2 CRs all have their CRD in git or in a chart.
Moving the CDI CR up into `platform` was rejected: that would put CDI's health on
the tier the CNI gates and everything waits on — the mistake the oauth2-proxy and
headlamp splits exist to undo.
apps-vms gains dependsOn: platform-config-cdi. LOAD-BEARING, not cosmetic:
apps/vms/unifi/20-datavolume.yaml provisions on storageClassName: longhorn-vm and
its comment claimed platform-config guaranteed the profiles — which this move
would have silently falsified.
THE PRUNE TRANSIENT, MEASURED RATHER THAN ASSUMED. platform-config has
prune: true, so it deletes both profiles once, CDI recreates them with empty spec,
and the new tier re-applies the overrides ~30-60s later. Compared our override
against CDI's unaided inference for the same Longhorn provisioner on dev:
longhorn-vm (we override) spec RWX/Block -> status ReadWriteMany/Block
longhorn-static (no override) spec unset -> status ReadWriteOnce/Block
Both infer cloneStrategy: snapshot. So cloneStrategy is NOT at risk; accessModes
IS — unaided CDI gives RWO. A DataVolume provisioned on longhorn-vm inside the
window would be stamped RWO/Block and be PERMANENTLY non-live-migratable. Flux can
no longer cause it (apps-vms gates on the new tier); a human must not do it by hand.
Corroborating evidence that the recreate happens at all: dev has 5 StorageClasses
and 5 StorageProfiles, three with fluxOwner=NONE, spec unset and status populated
— CDI creating and inferring them with no Flux involvement.
MERGE PRECONDITION: `flux get kustomization platform-config` must be Ready on the
target first. If it is not, the profiles are pruned and sit at CDI defaults until
it recovers — and prod was in that state hours earlier. Fallback is the two-step
the Cilium move used (merge with prune: false, verify the ownership label moved,
restore prune: true).
substituteFrom: cluster-vars is declared even though the manifest has no ${TOKEN},
deliberately: conformance/tests/l0-static/flux-postbuild-substitution only audits
paths whose Kustomization declares it, so omitting it would move the file OUT of
the audited set — a blind spot for a future literal-token ship. Gate confirms it
stayed in (path=./platform-config-cdi files=2 defined=0 hazards=0). No SOPS
decryption stanza: the moved file is two plain CRs, so no overlay change was needed.
VERIFIED INDEPENDENTLY OF THE AGENT: platform-config renders 0 StorageProfile
while keeping the CDI and KubeVirt CRs; platform-config-cdi renders exactly the
two profiles; the graph is byte-identical across dev and prod with apps-vms
carrying both edges and no cycle. Full CI gate PASS.
KNOWN FOLLOW-UP: bootstrap/standup.sh TIER_ORDER does not yet include
platform-config-cdi, so `resume` will not wait on it. Another agent holds that
file; the PM will add it.
Refs R-GITOPS-01, R-ENV-02.
Co-Authored-By: Claude Opus 5 <[email protected]>
R-ENV-02 promises dev and prod differ ONLY by scoped cluster-vars overrides. In fact
dev LAN addresses were hardcoded into base manifests, so clusters/prod would have come
up ANNOUNCING DEV ADDRESSES (192.168.1.x) on the prod LAN (192.168.2.x).
New cluster-vars knobs (base default = dev literal, per the file's existing convention):
K3S_API_HOST platform/cilium/helmrelease.yaml (+ the values.yaml mirror)
CILIUM_LB_POOL_START platform-config/cilium/l2-ip-pool.yaml
CILIUM_LB_POOL_STOP "
UNIFI_L4_VIP apps/vms/unifi/50-service-l4.yaml
CRAFTY_L4_VIP platform/crafty/service-l4.yaml
S3_BACKUP_ENDPOINT platform/keycloak/postgres-cluster.yaml, apps/wave-0/{nextcloud,
semaphore}-db.yaml, and platform/velero/helmrelease.yaml
Also fixes GATEWAY_VIP's base default, which was still the RETIRED libvirt address
10.73.0.240, and adds the GATEWAY_VIP patch that clusters/prod was missing entirely.
clusters/base/apps-vms.yaml gains postBuild.substituteFrom (it was the one consuming
Kustomization without it, so a ${TOKEN} there would have shipped as a literal string).
The envsubst contract is documented there: ${VAR} substitutes and escapes as $${VAR};
$VAR and $(cmd) are left alone; ${ARR[0]} hard-errors. The three UOS_URL expansions in
the unifi cloud-init are escaped accordingly.
PROD ADDRESS PLAN (operator, 2026-08-31):
nodes .10/.11/.12 · control-plane VIP .9 (Ansible-side) · GATEWAY_VIP .20
Cilium LB pool .20-.30
CONTAINMENT INVARIANT, now documented at the pool and in the prod overlay: GATEWAY_VIP
MUST equal CILIUM_LB_POOL_START. The shared Gateway pins no address, so Cilium LB-IPAM
gives it the first free address of a matching pool block. An initial prod proposal put
.20 outside a .21-.30 pool; the Gateway would have come up on .21 while split-horizon
coredns-custom kept answering *.home.keithjackson.dev with .20 — an address nothing
announces — blackholing in-cluster OIDC hairpin traffic while reporting healthy. The
pool was widened to .20-.30. The control-plane VIP (.9) stays outside the pool so
kube-vip and LB-IPAM can never contend.
Values prod still cannot know stay INVALID `TBD-PROD-*` placeholders on purpose: base
defaults are dev values, so an omitted patch means prod silently inherits a dev address
— far worse than a loud failed apply.
DEV IS BYTE-IDENTICAL. Verified by kustomize build over 13 paths before/after, then
flux envsubst with the dev cluster-vars values applied to both sides: zero drift. The
only deltas are the intended additive keys in the overlay ConfigMap itself. No
unresolved ${TOKEN} survives. render-golden green (10 goldens); yamllint clean.
Serves: R-ENV-02. Task: T-7.1 (prerequisite). Gate: MERGE GATE: PASS.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Text-only cleanup after the upgrade campaign. Updates stale version
strings, prose, and comments to the verified current facts; no
Kubernetes behavior or version pins changed except the kubectl
toolchain bump (below).
Verified facts applied: k3s v1.36.4+k3s1, Debian 13 trixie,
Cilium 1.20.1 / Gateway API v1.6.1, Longhorn 1.12.1, node RAM 24 GiB,
dedicated virtio2 SSD etcd disk per node, Velero chart 12.x / v1.18,
Grafana 13.2.0.
- Version strings across infra/ and platform/ READMEs + comments
- kubectl toolchain 1.31.4 -> 1.36.4 (devcontainer/ci/conformance
versions.env; 1.31 vs a 1.36 cluster exceeded the +-1 skew)
- Retired-single-apps-Kustomization refs -> apps-wave-0/1/2 + apps-vms
with per-wave SOPS decryption (flux/clusters docs + bootstrap.sh)
- COMPLETED/historical banners on the three executed plan docs
- Resolved TODO(WS-SEC) markers -> Renovate-maintained ranges
- Appended dated DECISIONS-LOG entry (2026-08-30) superseding the
2026-08-26 LIVE STATE line
Left as revalidation items (not blind-edited): external-snapshotter
v8.2.0 vs 1.36, Cilium ext_authz/forward-auth relevance under 1.20.1,
conformance ImageVolume feature-gate assertions under 1.36.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Replaces the single `apps` Flux Kustomization with dependency-ordered waves
(apps-wave-0..2) so a crashlooping workload isolates to its wave + downstream
instead of stalling the entire app tier. Parallel within a wave, ordered across.
- catalog/render.py: compute waves by longest dependency-path depth over the
ServiceDefinition `dependencies:` edges (a `<svc>-db` is a leaf, so its
consumer lands strictly higher — the "DB below consumer" rule falls out of
longest-path, no special case). `--emit-waves` generates the per-wave
kustomizations + Flux CRs; `--wave-layout` places renders into the right dir.
wave 0: pihole gitea jackett plex qbittorrent nextcloud-db semaphore-db
wave 1: sonarr radarr nextcloud semaphore gitea-actions
wave 2: seerr
- apps/*.yaml -> apps/wave-{0,1,2}/ (byte-identical moves; SOPS files intact).
- clusters/base: apps.yaml removed; apps-wave-{0,1,2}.yaml added (dependsOn
chain: platform-config -> wave-0 -> wave-1 -> wave-2, prune+wait each).
- clusters/dev: one SOPS decryption patch per wave (load-bearing).
- DESIGN-waves.md: wave table, topology, cutover runbook.
Cutover: preceded by disabling prune on `apps` (1bfb0db) so removing that
object here does not GC its resources; the wave Kustomizations SSA-adopt the
byte-identical manifests in place (no restart, no PVC churn).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Phase 0 foundation shell (read-only spec at ../home-network-k3s). Top-level
tree + rules; workstream agents fill their subtrees on feature branches.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
jakman85andClaude Opus 5