c8c1d2935d2c2c20758f9695cd8265901ac8efe2
6
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  jakman85andClaude Opus 5
|
8e913fdd7b |
fix(node_health): "Failed to map" does NOT mean memory lost — plus survey results
THE MODEL WAS WRONG AND MY CHECK WITH IT. A live counter-example: k3s-prod-2 after its power
cycle shows MEMATTR=0xbeeb0018 and 'Failed to map ... @ 0xbeeb0018' — the SAME address and SAME
line as both of its 2.6 GiB boots — with MemTotal 15857732 kB, i.e. 15.1 GiB of 16 GB. FULL
MEMORY. The check reported FAIL 'THIS NODE HAS LOST MEMORY TO THE BUG' on a healthy node while
memory.physical_total correctly PASSed at 4.2%. The two checks contradicted each other.
REFINED MECHANISM — two kernel functions were conflated:
efi_memattr_init() does the memblock_reserve(). Catastrophic loss needs tbl_size NEGATIVE
(signed int -> sign-extended -> clamped to PHYS_ADDR_MAX). A garbage-but-POSITIVE tbl_size
reserves a modest wrong amount and costs nothing noticeable.
efi_memattr_apply_permissions() does the later memremap(), and THAT is what prints
'Failed to map'. It fails for ANY sufficiently wrong size, negative or merely large-positive.
So the line proves the table was corrupt AND TRUSTED, not that memory was lost. The cost is set
by the garbage VALUE, which is why one address gave 2.6 GiB twice and 15.1 GiB once.
THIS ALSO REFUTES THE ADDRESS->OUTCOME HYPOTHESIS OUTRIGHT — not untested, disproven.
STRUCTURAL FIX so the contradiction cannot recur: the shortfall is computed ONCE into a shared
fact (node_health_mem_shortfall) with worst-wins sub-verdicts; memory.physical_total IS that
verdict and firmware.efi_memattr READS it, measuring nothing itself. FAIL is gated on the shared
verdict. 'Failed to map' + normal memory is now WARN ('the bug fired and this boot survived it').
No honesty guard was weakened; one was strengthened (the measurement clause falls back to the DIMM
shortfall when zoneinfo is unreadable, and only claims 'could NOT be measured' when neither was
read). All five paths incl. the two unproducible-live SKIPs exercised against synthetic facts.
Verdicts: prod-1 WARN, prod-2 WARN (was FAIL), prod-3 PASS, dev unaffected.
SECOND FAULT, arguably worse for prod: NODE 2 HANGS ON A WARM REBOOT, STAYING POWERED. Its
journal ends cleanly mid-shutdown ('eno1: NIC Link is Down') then stops; the box sat powered but
off-LAN for ~38 min until the operator held the power button. A node that cannot survive an
unattended warm reboot cannot be rolled in an HA cluster, and node_health cannot see a machine
that is off the network. Leading candidate: node 2 is the ONLY node with 'Recover OS after Boot
Failure = Enable' — promoted from 'coincidence' in the BIOS diff to a live availability defect.
The reboot survey is NOT viable unattended on node 2 until this is understood.
SURVEY RESULTS (40 boots): prod-1 0/20, prod-3 0/20, prod-2 0 ROUNDS (hung on its first reboot),
pooled 0/40 -> p(bad) 95% CI 0.000-0.088. NOT elimination: 0/20 still permits 17% per node, and
node 2's prior 2-of-3 is unchanged. What it did establish: addresses are node-specific and highly
concentrated (node 1 used 3 distinct addresses in 20 boots, 15 at one; no address ever shared
between nodes); MEMATTR -> parse was a PERFECT function across all 7 repeated addresses over 37
boots; and the corrupting bytes are stable PER MACHINE (node 1 always 1030, node 3 always
1463964749), so the 'shared OS boot chain' inference needs refining.
Adds playbooks/memattr-survey.yml + roles/memattr_survey — reboots opt-in, resumable, artifacts
gitignored. Documents an Ansible defect worth knowing repo-wide: a looped include_tasks under the
default 'linear' strategy is flattened per host, so hosts run SERIALLY; the first attempt rebooted
node 1 twenty times while the others idled. Fixed with strategy: free + a forks preflight assert.
Serves: R-ENV-01, R-ENV-03, R-OBS-04, R-TEST-02. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
e623d27e2d |
feat(ansible): parameterise target groups so prod reuses the roles unchanged (R-ENV-02)
roles/k3s_server, roles/cilium and every node-host playbook hardcoded the dev group
names k3s_primary/k3s_secondary/k3s_servers, so the prod inventory groups could not be
selected at all. That broke the R-ENV-02 promise that prod reuses the SAME roles, and
blocked PROD-PROVISIONING.md §6 outright.
TWO KNOBS, deliberately separate — Ansible templates a play's `hosts:` BEFORE any host
context exists, so group_vars is unreadable there, while roles run WITH host context:
* which hosts a play RUNS ON — k3s_hosts, k3s_primary_hosts/k3s_secondary_hosts
(k3s.yml's split), vpn_egress_gateway_hosts; each `| default(<dev group>)`, set by -e
only. Follows node-health.yml's established `<name>_hosts | default(dev)` pattern.
* which group a ROLE means by "my primary"/"my servers" — k3s_primary_group,
k3s_servers_group in group_vars/all.yml (dev), overridden in group_vars/k3s_prod.
Follows the k3s_api_host convention already in this repo. No per-run flag.
DEV IS UNCHANGED — the key evidence. --list-hosts/--list-tasks/--syntax-check captured
for all 9 playbooks at HEAD and after: sorted host lists IDENTICAL for all 9, same
primary/secondary split, same 6-play site.yml. (Raw --list-hosts PRINT ORDER varies run
to run; proven to be Ansible's own set ordering by running UNMODIFIED HEAD cilium.yml
four times -> 3,1,2 / 1,3,2 / 1,2,3 / 1,2,3. Hence sorted comparison.) --list-tasks
differs in exactly two files, only by added TAGS annotations and one new assert; no task
reordered, renamed or removed. Var resolution verified per environment with -c local:
dev -> k3s_primary/192.168.1.50/sans .50,.49,127.0.0.1,.51,.52; prod ->
k3s_prod_primary/192.168.2.10/vip .9/sans .10,.9,127.0.0.1,.11,.12.
BREAKS THE SMARTMONTOOLS CIRCULAR DEPENDENCY. node_baseline tasks are now tagged
packages/system/disks, so the package install can run alone:
ansible-playbook playbooks/node-baseline.yml -e k3s_hosts=k3s_prod --tags packages
Skipping is the guard — no disks-tagged task is selected, so the
BLOCKED-pending-disk-decision paths are never templated, let alone passed to mkfs.
Belt-and-braces, a new disks-tagged assert fires first in a FULL run and names §2
explicitly instead of failing obscurely at mkfs. `tags: never` was deliberately NOT used
(it would change the default run).
FOOTGUN FOUND AND FIXED: roles/cilium, cluster_verify and flux_bootstrap all hardcoded
.cache/dev.kubeconfig — the exact file infra/devcontainer/dev.sh exports as $KUBECONFIG.
Once prod became targetable, a prod cilium/verify run would have SILENTLY OVERWRITTEN it,
leaving the operator's kubectl quietly answering from PROD. Now cluster_kubeconfig_name
(dev.kubeconfig -> prod.kubeconfig). Dev path byte-identical.
KNOWN, DOCUMENTED, NOT FIXED HERE: flux-bootstrap.yml retargets but roles/flux_bootstrap
shells out to bootstrap/flux/bootstrap.sh with a hardcoded --path=clusters/dev — a
bootstrap/ subtree change, not a target-group change (§6, cross-referenced to §7).
vpn.egress.gateway.yml is parameterised but prod has no egress group yet and would need
its own vaulted PIA credentials. --check against prod is still impossible until the prod
vault exists — even the packages-only run needs it.
Nothing was run against the dev cluster: --list-hosts/--list-tasks/--syntax-check, plus
debug/assert with -c local, only.
Serves: R-ENV-01, R-ENV-02, R-ENV-03. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
666cc0d809 |
feat(ansible): prod node inventory + vaulted become; smartmontools into node_baseline
Prod inventory scaffolding for the three bare-metal nodes, and the become posture the operator ruled for production. BECOME: prod does NOT get dev's NOPASSWD sudo. Prod keeps a real sudo boundary and supplies the password to Ansible as an ansible-vault-encrypted `ansible_become_password` in inventory/group_vars/k3s_prod/vault.yml, mirroring the existing hypervisor and proxmox_hosts groups. The decrypting passphrase stays outside the repo (~/.config/home-k3s/ansible-vault-pass), so plays still run unattended with no plaintext secret in git. Committed here: README.md + vault.yml.example only — the operator creates the encrypted vault (`ansible-vault create`), as with every other vaulted group. PACKAGES BELONG IN THE ROLE (operator ruling): smartmontools is now declared in node_baseline_packages, not hand-installed on a node. Drive health tooling is a permanent part of a bare-metal node's baseline — dev nodes are VMs and never needed it. Same click-ops-never principle as the rest of the repo. ADDRESSING: nodes .10/.11/.12, reached DIRECTLY on the LAN (no pfSense NAT hop, unlike dev's 192.168.2.102:225x mapping), so ansible_host is the real node IP. kube-vip control-plane VIP is 192.168.2.9 — deliberately BELOW the nodes and OUTSIDE the Cilium LB pool (.20-.30) so kube-vip and LB-IPAM can never contend for an address. The ingress Gateway VIP (.20) and the LB pool are Flux/cluster-vars concerns and deliberately do not appear in Ansible. BLOCKED-BY-DESIGN: node_baseline_longhorn_device / node_baseline_etcd_device are present but set to an obviously invalid /dev/BLOCKED-... path pending the operator's disk-layout decision (node 1 is a single SATA SSD; the role's /dev/vdb,/dev/vdc defaults are virtio names that do not exist on bare metal). Leaving them unset would silently fall back to those equally-nonexistent defaults — a confusing failure that looks like a wiring bug. This fails just as hard and says exactly why. KNOWN FOLLOW-UP: roles/k3s_server and every node-host playbook hardcode the literal group names k3s_primary/k3s_secondary/k3s_servers, so the k3s_prod_* groups are not selected by them as-is. Harmless now (nothing can accidentally run against prod) but the "same roles, unchanged" reuse R-ENV-02 promises needs the target group parameterized before §6 of PROD-PROVISIONING.md can execute. Documented in hosts.ini and both READMEs. Serves: R-ENV-01, R-ENV-03, R-SEC-01. Task: T-7.1. Gate: MERGE GATE: PASS. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 4.8
|
1f921fbfed |
docs(ansible): add re-provision runbook + node-host playbook list
A node rebuild (tofu -replace / fresh OS) wipes host-level config Flux/Helm don't manage. site.yml omits kube-vip.yml and vpn.egress.gateway.yml, so a re-provision missed the node-host OpenVPN on k3s-dev-3 and dropped all egress-class=vpn pod traffic. Document the node-host layers that must be re-run after any re-provision, and correct the stale author-only banner (these plays are live). Co-Authored-By: Claude Opus 4.8 <[email protected]> |
||
|
jakman85andClaude Opus 4.8
|
f2a7e42068 |
Phase 1 (author-only): node provisioning IaC — tofu + cloud-init + Ansible (T-1.1/1.2/1.3)
OpenTofu libvirt module (k3s-dev NAT 10.73.0.0/24, 3x 6GiB/4vCPU VMs, 20G OS +
40G thin data, host-passthrough), cloud-init baseline (k3s/Cilium/Longhorn
prereqs, static net), Ansible k3s-HA + Cilium (kube-proxy replacement, Gateway
API, Hubble; flannel/kube-proxy/Traefik disabled). PM fix: escape ${...} in a
cloud-init template comment (tofu templatefile parse). tofu fmt/init/validate =
Success; ansible --syntax-check + yamllint pass. NOTHING executed (no apply).
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 4.8
|
5ba9238cc1 |
Scope Phase 1: dev/test cluster bring-up on local KVM
Add infra/PHASE1-SCOPE.md (grounded in local recon: 24c/22GiB-avail/137G, AMD-V+libvirt ready; OpenTofu/age/sops/flux missing) + infra/ and bootstrap/ structure stubs. Maps T-1.1..T-1.5; resource/network plan; risks; acceptance gates; operator decisions. No spec edits; gate green. Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]> |