cadf64a514928de383e1b84dda80c8698cc299da
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  jakman85andClaude Opus 5
|
d1a6628a97 |
feat(ha): the CNI dials the control-plane VIP — kube-vip becomes a CNI prerequisite
OPERATOR DECISION 2026-09-06: "use the VIP as intended — a virtual address to reach
the cluster and provide fault tolerant HA. Without a change it will not work in HA."
THE DEFECT. Cilium's kube-proxy replacement dialled a SINGLE NODE. Re-confirmed live
before changing anything: all three prod cilium-agent pods carried
KUBERNETES_SERVICE_HOST=192.168.2.10 — k3s-prod-1's own address — while the kube-vip
VIP 192.168.2.9 was Running on all three nodes with a held lease. Lose prod-1 and the
CNI's control-plane path is dead on an "HA" cluster. clusters/prod's own comment said
the value must be the VIP and NOT .10, then called it "Not yet decided" — I treated
that stale comment as an open question when the evidence already settled it.
SPLIT, NOT REPOINT, because k3s_api_host had two consumers with opposite needs:
k3s_api_host unchanged — the FOUNDER's IP: the cold-bootstrap join
target and a tls-san. infra/tofu/outputs.tf GENERATES this
name, so renaming would ripple into tofu and the runbooks.
k3s_apiserver_endpoint NEW = {{ kube_vip_address }} — the HA address; what Cilium
consumes. Derived, not restated, so an environment overrides
ONE line and the VIP, the SAN and the CNI endpoint move
together. Prod needed no new override.
THE SECOND HAZARD, WHICH MY BRIEF DID NOT NAME and the agent found: pointing Cilium at
the VIP breaks a COLD bootstrap for the same reason the join would — site.yml ran
node-baseline -> k3s -> cilium, so Cilium would install against an address nothing
announced yet. That is the 2026-09-01 deadlock shape. Fixed by SEQUENCE, not value:
site.yml now imports kube-vip.yml BETWEEN k3s and cilium. It cannot go earlier
(kube-vip is a k3s auto-deploy manifest, so it needs a cluster) and it works there
because the DaemonSet is hostNetwork with KUBERNETES_SERVICE_HOST=127.0.0.1 — needing
neither CNI nor kube-proxy. roles/kube_vip gained a read-only `wait_for` on the VIP so
a cold run stops THERE with a named cause instead of surfacing as unreachable agents.
Also fixed a pre-existing bug that only mattered once this play joined site.yml: the
role's read-only interface probe ran without `check_mode: false`, so under --check it
was skipped and the assert fired with a misleading "set kube_vip_interface explicitly".
VERIFIED BY ME, not just reported:
renders dev K3S_API_HOST=192.168.1.49 prod=192.168.2.9 (each environment's VIP)
cilium template consumes k3s_apiserver_endpoint, not k3s_api_host
cold join still `--server https://{{ k3s_api_host }}:6443` — the founder
order site.yml: node-baseline -> k3s -> kube-vip -> cilium -> verify -> flux
gate full CI gate PASS
Agent-side, additionally: in-memory render of cilium-values.yaml.j2 per host showing
k8sServiceHost=the VIP with the join still on the founder; k3s_tls_sans renders
['.10','.9','127.0.0.1','.11','.12'] so NO cert reissue and NO k3s restart is involved
— .9 already answers under full CA verification; and --check --diff of kube-vip.yml
against prod reported 6 ok / 0 changed, i.e. the role edits change nothing about the
kube-vip prod already runs.
ha-control-plane-as-code 92 -> 112 assertions, turning two escalations into machine
checks: the Cilium template must use the endpoint var; the endpoint must derive from
kube_vip_address and k3s_api_host must not; per environment K3S_API_HOST must equal
that environment's VIP and be none of its node IPs (the [parity] contract, now
machine-checked rather than a comment); site.yml must order k3s -> kube-vip -> cilium.
Every new assertion mutation-tested and bites. One honest negative recorded: reverting
only the BASE default is not caught, because both overlays patch the key — the check
reads effective per-environment values, so the base default is unguarded.
APPLY ORDER, and this is the operator's step — nothing was applied:
PROD FIRST, and it is the low-risk direction (prod is the broken one). Push and let
Flux reconcile platform/cilium: the value change rolls the cilium-agent DaemonSet
ONE NODE AT A TIME (maxUnavailable: 1 — the knob that bounded the 2026-09-01
incident), it will not proceed past an unready pod, existing datapath survives an
agent restart, and .9 is already live before the change lands.
DEV SEPARATELY, operator present. Same mechanics but live dev agents dial
192.168.1.50, and dev is mid-DNS-migration on dev-live. Do not fold it into that.
ANSIBLE: nothing to run for either live cluster; the Ansible half matters only for a
cold build. Remove the now-redundant standalone kube-vip.yml step from any runbook.
NEW NAMED GAP, unwritten: the L2 test cannot assert the running agents' live
KUBERNETES_SERVICE_HOST, which is the drift the L0 check cannot see. Recorded in that
test's gap list.
Refs R-PLAT-01, R-NET-01, R-ENV-02.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
fdc4a7d9f4 |
fix(cilium): maxUnavailable 2 -> 1 — bound CNI rollout blast radius (P2)
During the substitution incident a bad render (k8sServiceHost: "") took down TWO of three
Cilium agents simultaneously. The agents' `config` init container falls back to the API
ClusterIP, which only the Cilium agent itself can translate — and that agent is the one
being replaced — so it deadlocks on `dial tcp 10.43.0.1:443: i/o timeout`.
Root cause of the 2-at-once: `updateStrategy.rollingUpdate.maxUnavailable: 2` is the
UPSTREAM CHART DEFAULT, confirmed by downloading cilium-1.20.1.tgz and reading
values.yaml:437-444 — not a local choice, and not overridden anywhere in this repo.
maxUnavailable: 1 makes a rollout replace ONE agent at a time and stop at the first pod
that fails to become Ready. The whole value of the setting is that the rollout halts on
the first bad node instead of taking the majority of the dataplane with it, and that
guarantee only exists at 1. It matters far more on a cold PROD bootstrap, where there is
no healthy peer to recover from — dev only self-healed because k3s-dev-3 kept a working
agent throughout.
Set as a [parity] field in ALL THREE places, per this repo's documented contract that the
Ansible bootstrap values and the Flux HelmRelease values must agree on settings that
define cluster networking (Ansible installs Cilium at bootstrap; the HelmRelease adopts
it; the two layers fight otherwise):
platform/cilium/helmrelease.yaml (authoritative for Flux)
infra/ansible/roles/cilium/templates/cilium-values.yaml.j2 (authoritative for bootstrap)
platform/cilium/values.yaml (reference mirror, kept in sync)
Verified by rendering the .j2 with roles/cilium/defaults and diffing full value sets: every
[parity] field is byte-equal across all three; only k8sServiceHost differs, as designed
(${K3S_API_HOST} vs {{ k3s_api_host }}).
MERGING THIS IS NON-DISRUPTIVE. updateStrategy lives at DaemonSet.spec.updateStrategy — a
SIBLING of spec.template (chart daemonset.yaml:49-53). The DaemonSet controller decides a
pod is out of date by hashing spec.template alone, so the pod-template hash does not move,
no new ControllerRevision is created, and zero pods are recreated. Helm patches the field
in place. (If it were disruptive it would be self-defeating: rolling agents under the old
maxUnavailable: 2 in order to install maxUnavailable: 1.) Verify after reconcile with
`kubectl -n kube-system get ds cilium -o jsonpath='{.spec.updateStrategy.rollingUpdate.maxUnavailable}'`
plus unchanged pod ages — that is the cleanest proof nothing rolled.
Trade-off recorded in the comments: upgrades serialise, roughly two waves to three at 3
nodes (a minute or two). On a large cluster this becomes painful and a percentage such as
"10%" would be right — noted so a future larger cluster revisits it deliberately.
SCOPE: this bounds blast radius, it does NOT close the substitution race. A bad render
still ships; it now breaks one node and stalls rather than taking the majority.
platform.dependsOn: [flux-system] (P0) is the fix for the cause.
Serves: R-PLAT-01, R-NET-01.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
3f980d2a17 |
feat(env): tokenize hardcoded dev LAN addresses into cluster-vars (R-ENV-02)
R-ENV-02 promises dev and prod differ ONLY by scoped cluster-vars overrides. In fact
dev LAN addresses were hardcoded into base manifests, so clusters/prod would have come
up ANNOUNCING DEV ADDRESSES (192.168.1.x) on the prod LAN (192.168.2.x).
New cluster-vars knobs (base default = dev literal, per the file's existing convention):
K3S_API_HOST platform/cilium/helmrelease.yaml (+ the values.yaml mirror)
CILIUM_LB_POOL_START platform-config/cilium/l2-ip-pool.yaml
CILIUM_LB_POOL_STOP "
UNIFI_L4_VIP apps/vms/unifi/50-service-l4.yaml
CRAFTY_L4_VIP platform/crafty/service-l4.yaml
S3_BACKUP_ENDPOINT platform/keycloak/postgres-cluster.yaml, apps/wave-0/{nextcloud,
semaphore}-db.yaml, and platform/velero/helmrelease.yaml
Also fixes GATEWAY_VIP's base default, which was still the RETIRED libvirt address
10.73.0.240, and adds the GATEWAY_VIP patch that clusters/prod was missing entirely.
clusters/base/apps-vms.yaml gains postBuild.substituteFrom (it was the one consuming
Kustomization without it, so a ${TOKEN} there would have shipped as a literal string).
The envsubst contract is documented there: ${VAR} substitutes and escapes as $${VAR};
$VAR and $(cmd) are left alone; ${ARR[0]} hard-errors. The three UOS_URL expansions in
the unifi cloud-init are escaped accordingly.
PROD ADDRESS PLAN (operator, 2026-08-31):
nodes .10/.11/.12 · control-plane VIP .9 (Ansible-side) · GATEWAY_VIP .20
Cilium LB pool .20-.30
CONTAINMENT INVARIANT, now documented at the pool and in the prod overlay: GATEWAY_VIP
MUST equal CILIUM_LB_POOL_START. The shared Gateway pins no address, so Cilium LB-IPAM
gives it the first free address of a matching pool block. An initial prod proposal put
.20 outside a .21-.30 pool; the Gateway would have come up on .21 while split-horizon
coredns-custom kept answering *.home.keithjackson.dev with .20 — an address nothing
announces — blackholing in-cluster OIDC hairpin traffic while reporting healthy. The
pool was widened to .20-.30. The control-plane VIP (.9) stays outside the pool so
kube-vip and LB-IPAM can never contend.
Values prod still cannot know stay INVALID `TBD-PROD-*` placeholders on purpose: base
defaults are dev values, so an omitted patch means prod silently inherits a dev address
— far worse than a loud failed apply.
DEV IS BYTE-IDENTICAL. Verified by kustomize build over 13 paths before/after, then
flux envsubst with the dev cluster-vars values applied to both sides: zero drift. The
only deltas are the intended additive keys in the overlay ConfigMap itself. No
unresolved ${TOKEN} survives. render-golden green (10 goldens); yamllint clean.
Serves: R-ENV-02. Task: T-7.1 (prerequisite). Gate: MERGE GATE: PASS.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 4.8
|
cbc2301b30 |
docs: reconcile docs/comments with post-upgrade cluster state
Text-only cleanup after the upgrade campaign. Updates stale version strings, prose, and comments to the verified current facts; no Kubernetes behavior or version pins changed except the kubectl toolchain bump (below). Verified facts applied: k3s v1.36.4+k3s1, Debian 13 trixie, Cilium 1.20.1 / Gateway API v1.6.1, Longhorn 1.12.1, node RAM 24 GiB, dedicated virtio2 SSD etcd disk per node, Velero chart 12.x / v1.18, Grafana 13.2.0. - Version strings across infra/ and platform/ READMEs + comments - kubectl toolchain 1.31.4 -> 1.36.4 (devcontainer/ci/conformance versions.env; 1.31 vs a 1.36 cluster exceeded the +-1 skew) - Retired-single-apps-Kustomization refs -> apps-wave-0/1/2 + apps-vms with per-wave SOPS decryption (flux/clusters docs + bootstrap.sh) - COMPLETED/historical banners on the three executed plan docs - Resolved TODO(WS-SEC) markers -> Renovate-maintained ranges - Appended dated DECISIONS-LOG entry (2026-08-30) superseding the 2026-08-26 LIVE STATE line Left as revalidation items (not blind-edited): external-snapshotter v8.2.0 vs 1.36, Cilium ext_authz/forward-auth relevance under 1.20.1, conformance ImageVolume feature-gate assertions under 1.36. Co-Authored-By: Claude Opus 4.8 <[email protected]> |
||
|
jakman85andClaude Opus 4.8
|
fff44992e7 |
migrate(proxmox): bootstrap source URL -> 192.168.2.103; Cilium k8sServiceHost -> 192.168.1.50
Co-Authored-By: Claude Opus 4.8 <[email protected]> |
||
|
jakman85andClaude Opus 4.8
|
cc89b4b830 |
Autonomous session: Phase-2 platform authoring + Flux bootstrap progress
Author-only Phase-2 components (platform suspended; cluster untouched): - platform/longhorn: 3-replica SC + bulk external-mount indirection (R-STATE) - platform/monitoring: kube-prometheus-stack + Loki + Alloy (dev-trimmed) + 8 alert rules (R-OBS) - platform/cilium: parity fix (k8sServiceHost=10.73.0.11 + masquerade) safe to adopt Phase 2 - conformance: partial L2 tests (worker hit session limit; incomplete — see DECISIONS-LOG K2) - bootstrap/gitea: fix rootless-podman perms (host bind-mount -> named volume) Flux installed on the cluster; host Gitea up + repo pushed; GitRepository BLOCKED by host firewalld (VM->10.73.0.1:3000) — needs one operator sudo command (DECISIONS-LOG). Known issue K1: cluster-vars substitution-var case mismatch (fix before un-suspend). Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 4.8
|
af4f6c07ae |
T-0.1 Flux GitOps layout + dev/prod overlays + platform component skeletons (R-GITOPS-01/03, R-ENV-02, R-PLAT-01)
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]> |