TASK 1 — reliably single-pass green L2/L3:
Split run_chainsaw into a LIGHT pass (concurrent, config parallelism) and a
HEAVY pass (serial, parallel=1). The KubeVirt-CDI/Longhorn/DR tests
(vm-lifecycle, vm-data-survival, vm-default-deny, data-survival, dr-restore)
spike embedded-etcd on the small dev VMs; running them serially in their own
pass keeps their etcd spikes from ever coinciding with another test's setup —
the coincidence that let one heavy test's apiserver blip fail-close Kyverno
admission and abort every in-flight test at 0.01s. Heavy set is keyed by test
dir basename and overridable via CONF_HEAVY_TESTS. Each pass writes its own
JUnit; lib/merge_junit.py stitches them into the one stable report.junit.xml
CI collects, so the split is invisible downstream. Overall rc is the union of
both passes (no masking — real failures still surface).
Proof: full --layer l2,l3 run now completes single-pass green: 24/24 passed,
0 failures/errors/skipped. vpn-killswitch, which previously failed with an
apiserver EOF (etcd blip), passed; no mass environmental setup-aborts.
TASK 2 (T-4.1) — author conformance/tests/l3-fault-injection/alerting/
fixtures/smtp-sink.yaml: a hermetic Mailpit SMTP capture sink (Service
smtp-sink, SMTP 1025, HTTP API 8025) the alerting test applies as its mail
sink. restricted-PodSecurity compliant, in-memory (no PVC). Unblocks the
previously-aborting alerting scaffold; it now passes.
Touches conformance/ + ci-read content only — no apps/ or platform/ workload.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Restores the four semaphore resources a peer temp-disabled in 0abadd3 to unblock
the apps Kustomization while the crashloop was diagnosed. Both root causes are now
fixed and verified against the live image:
1. permission-denied writing /etc/semaphore/config.json (non-root UID 1001 vs
root-owned Longhorn PVC) -> podSecurityContext.fsGroup=1001 (schema 1.3.0);
verified the pod got past config write and successfully pinged its PostgreSQL.
2. config panic on SEMAPHORE_PORT=tcp://<svcIP>:3000 (kubelet Docker-link
injection for the same-named Service colliding with Semaphore's listen port)
-> explicit SEMAPHORE_PORT=":3000" env shadowing the service-link var.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
With the config PVC now writable (fsGroup), semaphore got past config write and
pinged its PostgreSQL successfully, then crashed on:
panic: value of field 'Port' is not valid: tcp://<svcIP>:3000
Because the Service is named `semaphore`, the kubelet injects the Docker-link-style
SEMAPHORE_PORT=tcp://<clusterIP>:3000, which collides with Semaphore's OWN
SEMAPHORE_PORT (its HTTP listen port). Add an explicit SEMAPHORE_PORT=":3000" env
entry — user-defined env takes precedence over service-link vars — pinning the
listen port back to :3000 (matches containerPort/Service). Uses the existing env
field; only apps/semaphore.yaml changes, all others byte-identical.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The semaphoreui/semaphore image falls through to its interactive setup wizard
and panics on /etc/semaphore/config.json permission-denied; the env-only pattern
doesn't yield a non-interactive config. Backed out to unblock the apps
Kustomization; files retained for a proper config-model follow-up.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The semaphoreui/semaphore image runs as non-root UID 1001 / GID 0 and writes its
generated config.json into the config dir on boot. A mounted Longhorn PVC is
root:root, so UID 1001 got "permission denied" and the pod crash-looped.
First-class the fix into the render contract (same mechanism the retired
gitea-bootstrap-patch was replaced by): schema 1.3.0 adds an optional pod-level
`podSecurityContext`, emitted verbatim onto spec.template.spec.securityContext by
render.py. Absent => every other app renders byte-identical (verified). semaphore
declares fsGroup=1001 (kubelet group-owns the PVC + adds the supplemental group so
UID 1001 can write) plus runAsUser/runAsGroup/runAsNonRoot pinning the image identity.
render.py selftest extended (verbatim render + absence). L0 (schema+kyverno 17/17),
L1 3/3, lint all green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Semaphore (Ansible UI, docs/13 row 10): internal exposure, internet egress,
config on Longhorn + external PostgreSQL, auth oidc. Reuses the CNPG-DB pattern
nextcloud established (apps/nextcloud-db.yaml, commit 4be6752).
- catalog/semaphore.yaml: ServiceDefinition (schema >=1.2.0 env) wiring the
SEMAPHORE_DB_* connection to semaphore-db-rw.semaphore-db:5432, break-glass
SEMAPHORE_ADMIN* local admin, and the FIXED base64 SEMAPHORE_ACCESS_KEY_ENCRYPTION.
- apps/semaphore.yaml: rendered (render.py --no-image-automation) — Deployment,
config PVC, Service, default-deny + egress/gateway/internet CNPs, HTTPRoute
semaphore.home.keithjackson.dev:3000, ServiceMonitor, SLI alert.
- apps/semaphore-db.yaml: CNPG Cluster in dedicated ns semaphore-db, initdb from
the owner secret, inheritedMetadata app.kubernetes.io/name=semaphore-db so the
dep-edge egress CNP matches.
- apps/semaphore-db-app.sops.yaml + apps/semaphore-bootstrap-secret.sops.yaml:
SOPS(age) owner creds (basic-auth) + mirrored db-password, break-glass admin,
and the persistent access-key encryption key.
OIDC (Keycloak realm client) is DEFERRED like gitea/nextcloud — comes up on the
break-glass local admin; realm-client wiring is the batched follow-up.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Onboard nextcloud (docs/13 row 7): public, DR-critical file sync backed by an
external PostgreSQL. Establishes the reusable CNPG-DB pattern for later DB-backed
services.
- catalog/nextcloud.yaml: ServiceDefinition (image nextcloud:31-apache :80, public,
internet, data 20Gi longhorn @/var/www/html, backup daily-offcluster, auth oidc
+platform-admins, ingress nextcloud.home.keithjackson.dev, dependency
nextcloud-db:5432). Uses schema 1.2.0 env for the Postgres connection, break-glass
admin, trusted-domain + OVERWRITE* proxy settings.
- apps/nextcloud-db.yaml: CloudNativePG Cluster in a dedicated nextcloud-db namespace
(modeled on keycloak-db; no default-deny, mirroring the verified keycloak posture),
inheritedMetadata stamps app.kubernetes.io/name=nextcloud-db so the rendered egress
CNP matches. initdb consumes a pre-provisioned owner secret.
- apps/nextcloud-db-app.sops.yaml + apps/nextcloud-bootstrap-secret.sops.yaml: SOPS
(age) — shared DB password mirrored across the two namespaces (Pods cannot read a
Secret cross-namespace), plus the break-glass local admin.
- apps/nextcloud.yaml: rendered manifests (catalog/render.py --no-image-automation).
- apps/kustomization.yaml: wire in the four new resources.
OIDC realm-client wiring DEFERRED (WS-APPS step-3 escape hatch): editing the reconciled
realm import in platform-config risks the running Keycloak realm / whole platform-config
apply, and nextcloud OIDC needs post-install occ steps with no first-class env — nextcloud
comes up INSTALLED on the break-glass local admin (as Gitea did); the Keycloak client is a
follow-up. Off-cluster backup awaits Velero/OQ-BKP (intent declared).
Gates: render --selftest PASS; other apps byte-identical; ci l0 17/17; l1 3/3; lint clean.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Extend the ServiceDefinition contract with optional per-container `env`,
`envFrom`, and `lifecycle` fields (k8s EnvVar / EnvFromSource / Lifecycle
shapes) so headless-install / DB-backed apps configure themselves through
the SD instead of a supplementary kustomize patch.
- schema: bump 1.1.0 -> 1.2.0; add optional env/envFrom/lifecycle to the
container kind (literal + secretKeyRef/configMapKeyRef; secretRef/
configMapRef; postStart/preStop exec via $defs/execHandler). Existing
fields unchanged; all fields optional -> absent renders byte-identical.
- render.py: emit env/envFrom/lifecycle verbatim onto the Deployment app
container when present; --selftest coverage for the new fields.
- catalog/gitea.yaml: fold the headless-install env (INSTALL_LOCK, fixed
SECRET_KEY via secretKeyRef, DOMAIN/ROOT_URL, actions, break-glass admin
creds) + the idempotent postStart break-glass admin bootstrap inline.
- apps/gitea.yaml: re-rendered with env/lifecycle inline (effective pod
spec provably equivalent to base+patch).
- DELETE apps/gitea-bootstrap-patch.yaml + drop it from apps/kustomization
patches. gitea-bootstrap-secret.sops.yaml kept (still sourced by the env).
Proves the renderer feature by retiring the known TODO; unblocks env + DB
onboarding for nextcloud/semaphore/unifi/minecraft. All other rendered apps
byte-identical. Gates: selftest PASS, l0 17/17 + schema, l1 goldens, lint.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Follow-up to the reciprocal-ingress fix: in-cluster verification (Hubble) revealed
the east-west path was STILL fully blocked — and that the pre-existing EGRESS half
was also broken, contrary to the original diagnosis. Root cause: a CiliumNetworkPolicy
`toEndpoints`/`fromEndpoints` selector is scoped to the POLICY's OWN namespace unless
it carries the reserved `k8s:io.kubernetes.pod.namespace` label. Every service lives
in its own namespace (== its name) and every dependency crosses a namespace boundary,
so an app-label-only peer selector matched nothing and Cilium silently denied the flow
(Hubble: sonarr->qbittorrent = "EGRESS DENIED ... Policy denied DROPPED").
Pin the peer namespace on BOTH halves — egress toEndpoints (destination ns == dep.to)
and the reciprocal ingress fromEndpoints (source ns == source name). This is a strict
TIGHTENING (more precise, still L3/L4), not a weakening. Verified end-to-end in-cluster:
sonarr->qbittorrent:8080, sonarr->jackett:9117, seerr->{sonarr:8989,radarr:7878,
plex:32400} now CONNECT (were DROPPED); undeclared sonarr->plex:32400 and
seerr->qbittorrent:8080 stay BLOCKED (default-deny holds).
Selftest + L0 (17/17) + L1 (3/3, goldens byte-identical) + lint all pass. NOTE: this
necessarily touches the egress toEndpoints selector, which the task scoped as
ingress-only; the premise that egress already worked was empirically false.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A `dependencies` edge is declared ONCE on the SOURCE, but with the default-deny-
BOTH-directions baseline (docs/03 R-NET-01/02) it needs TWO matching halves: the
source egress-allow AND the destination ingress-allow. render.py emitted only the
egress half, so every declared east-west dependency was silently dropped by the
destination's default-deny ingress — verified in-cluster: sonarr->qbittorrent:8080,
sonarr->jackett:9117 and seerr->sonarr:8989 were all BLOCKED.
Add a cross-service reverse-dependency pass (build_reverse_map) and render the
reciprocal ingress half (r_reverse_dependency_policies): for each source that
declares a dependency on X, X gains an additive ingress-allow CiliumNetworkPolicy
`X-allow-<source>-<port>` whose fromEndpoints matches the source identity, mirroring
the egress half's L3/L4 granularity. Deterministic (sorted), additive (default-deny
ingress stays []), egress side unchanged. A lone render with no cross-catalog context
renders no reciprocal ingress, so the L1 render goldens are byte-identical.
New ingress CNPs: qbittorrent<-{sonarr,radarr}:8080, jackett<-{sonarr,radarr}:9117,
sonarr<-seerr:8989, radarr<-seerr:7878, plex<-seerr:32400. Selftest + L0 (17/17) +
L1 (3/3) + lint all pass.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The static gate passes (lint + Kyverno L0 + L1 render) but the trailing
actions/upload-artifact@v4 step fails with "not supported on GHES" — Gitea Actions
does not implement the artifact-v2 backend — and its always() failure sank the whole
job. Remove the step; JUnit/coverage remain in the job workspace. Re-add via the
@v3 action or Gitea's artifact backend later if retention is needed.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
`make -C ci spec-immutability || [ $? -eq 3 ]` fails on the honest skip: GNU make
exits 2 when the recipe exits 3, so the guard never matches. Invoke the script
directly so the exit-3 skip (spec repo not checked out in CI) is tolerated while a
real spec drift (exit 1) still blocks.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- install-tools.sh: the kyverno CLI release tarball is named _linux_x86_64, not
_linux_amd64 (mirrors infra/devcontainer/Containerfile). The gate job's kyverno
install 404'd on amd64; map amd64 -> x86_64 for kyverno only.
- act-runner: wait for /certs/client/ca.pem (published by the DinD sidecar) before
exec-ing the entrypoint, eliminating the startup crash-loop race.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
STEP 1 — enable Gitea Actions: pin GITEA__actions__ENABLED=true and
DEFAULT_ACTIONS_URL=github in the gitea bootstrap patch (was implicit upstream
default; make it a declared property).
STEP 2 — deploy + register an act_runner in a dedicated non-app namespace
(gitea-actions) so the privileged DinD executor sidecar is admitted without a
Kyverno policy exception (restrict-host-namespaces scopes to app namespaces only).
Docker executor + DinD sidecar over a shared TLS-cert emptyDir; runner state on a
Longhorn PVC (registers once). Registration token delivered as a SOPS-encrypted
Secret decrypted by Flux. Runner mounts no ServiceAccount token (R-SEC-02).
STEP 3 — author .gitea/workflows/gate.yml: the live enforced merge gate running
the STATIC layers (spec-immutability best-effort, lint, Kyverno L0, L1 render) via
`make -C ci lint l0 l1` with the pinned toolchain installed at job start. L2/L3
conformance is an if:false placeholder (needs a toolchain image + scoped cluster
creds — a design decision, not wired). merge-gate.yaml reduced to workflow_dispatch
(dormant full-pipeline blueprint). install-tools.sh gains check-jsonschema so the
schema stage validates in CI instead of skipping.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Controller now reaches the kube-API directly through the pfSense NAT
(192.168.2.50:6443 -> kube-vip VIP 192.168.1.49:6443), validating TLS
against the VIP via tls-server-name. Removes the dev.sh SSH-tunnel
scaffolding and updates the ansible source-of-truth so a rebuild
regenerates a direct-access kubeconfig.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Add an HA control-plane API VIP for the k3s cluster with kube-vip, and add
the VIP + all node IPs to the kube-apiserver serving-cert SANs so TLS via the
VIP validates. Prepares the stable failover endpoint the operator fronts with
a pfSense port-forward to 192.168.1.49:6443.
roles/kube_vip + playbooks/kube-vip.yml:
- Templates a single manifest (RBAC + DaemonSet kube-vip-ds) into each server's
k3s auto-deploy dir (/var/lib/rancher/k3s/server/manifests) so it is
reproducible and independent of Flux; k3s auto-applies it.
- Control-plane ONLY (cp_enable=true, svc_enable=false): Cilium keeps ownership
of Service LoadBalancing (L2 pool .53-.60) — no ARP conflict.
- Runs on control-plane nodes (nodeSelector node-role.kubernetes.io/control-plane),
hostNetwork, NET_ADMIN/NET_RAW, image pinned ghcr.io/kube-vip/kube-vip:v0.8.9.
- vip_interface auto-detected per node (the iface holding 192.168.1.5x = eth0).
- Leader election (plndr-cp-lock) with 15/10/2s lease timings.
- This cluster runs without kube-proxy (Cilium replacement), so a hostNetwork
pod cannot reach the kubernetes ClusterIP; kube-vip is pointed at the
node-local apiserver (KUBERNETES_SERVICE_HOST=127.0.0.1:6443) so leader
election works.
roles/k3s_server tls-san:
- New k3s_tls_sans (VIP + all three node IPs + 127.0.0.1, deduped); install
args now emit one --tls-san per entry.
- Persist the SAN list to /etc/rancher/k3s/config.yaml (read by a running k3s)
and Restart k3s handler so an existing cluster regenerates its serving cert.
- k3s.yml secondaries run serial:1 so a SAN change rolls one node at a time,
keeping etcd quorum (kube-vip keeps the API reachable during each restart).
Verified live: DS 3/3 ready, VIP answers on 192.168.1.49:6443, all 3 certs and
an s_client against the VIP carry 192.168.1.49 + .50/.51/.52 + 127.0.0.1, all
nodes Ready throughout the rolling restart.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Cut the GitOps source over from the bootstrap host-Gitea
(http://192.168.2.103:3000) to the now-healthy in-cluster Gitea at
https://gitea.home.keithjackson.dev. Public repo, LE-prod wildcard
cert publicly trusted, resolved in-cluster via coredns->Gateway, so
no secretRef/caCert needed. Bootstrap host-Gitea retained (stopped)
as a recovery path.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Any single-replica app with a `storage:` entry mounts a ReadWriteOnce Longhorn
PVC. The default RollingUpdate strategy starts the new pod before terminating the
old one, but the old pod still holds the RWO volume -> the new pod hangs in
ContainerCreating and the rollout deadlocks (observed on gitea's update). Emit
spec.strategy.type=Recreate whenever storage is present so the old pod releases
the PVC first. Non-storage apps (and VMs) keep the default (no strategy emitted).
Re-rendered apps: gitea, pihole, sonarr, radarr, plex, qbittorrent, jackett now
carry strategy: Recreate. Updated the egress-class L1 render goldens (storage
fixture) accordingly; all L1 render checks pass.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Two defects blocked in-cluster Gitea from becoming the Flux source:
1. Storage mountPath: the renderer hard-coded /data/<name>, so Gitea's PVC
mounted at /data/data while Gitea writes all state to /data — real repos/DB
landed on the ephemeral rootfs. Add an OPTIONAL `mountPath` to the storage
schema + render.py (default stays /data/<name>, back-compat). catalog/gitea.yaml
sets data.mountPath: /data. Only gitea.yaml's rendered mount changes; every
other app renders byte-identical.
2. Headless install: the instance was un-installed (INSTALL_LOCK=false, ephemeral
SECRET_KEY, no admin, API 404). A Gitea-only supplementary manifest
(apps/gitea-bootstrap-patch.yaml) patches the rendered Deployment with
GITEA__security__INSTALL_LOCK=true, a FIXED SECRET_KEY from a persistent SOPS
secret (apps/gitea-bootstrap-secret.sops.yaml), ROOT_URL/DOMAIN, and a postStart
hook that idempotently creates a break-glass local admin. State persists on the
now-correct /data Longhorn PVC.
The env/lifecycle wiring is a supplementary kustomize patch because the
ServiceDefinition schema/renderer does not yet express env/envFrom/lifecycle —
noted as a renderer follow-up (TODO in the patch).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
On the small dev VMs, 4 concurrent heavy tests (KubeVirt CDI + Longhorn) spiked
embedded-etcd into leader-changes/apiserver-ServiceUnavailable; with fail-closed
Kyverno admission this cascaded into mass test aborts. 2 lets the full L2/L3 suite
complete in a single clean pass.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Admission controller was crashlooping (9 restarts/4h, exit 255, NOT OOM:
live usage ~65Mi/384Mi limit, 7m cpu). Root cause: chart-default 100m CPU
request starved the process under node contention, so client-go calls hit
context-deadline-exceeded, leader-election lease renewal timed out, leadership
was lost and the webhook server closed. Raise the CPU request to 250m (no CPU
limit, to avoid CFS throttling) with modest memory headroom (256Mi/512Mi), and
raise dev admission replicas 1->2 so a single fail-closed pod restart no longer
502s cluster-wide admission-gated writes.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The offline `kyverno test` CLI cannot resolve the Flux postBuild token
${KYVERNO_VALIDATION_ACTION} in validationFailureAction, so the 4 policies
carrying it failed to load and their result rows reported "Not found" (14/17
cases). Render a throwaway copy of platform/kyverno with the base/prod value
(Enforce) before `kyverno test` in both ci/l0.sh and scripts/run-l0.sh; this
does not change in-cluster enforcement.
Add tests/values.yaml supplying Namespace labels so the offline CLI resolves
namespaceSelector matches -- without it the R-SEC-02/R-NET-05/R-IDP-02 Pod
cases were silently EXCLUDED (vacuous), not evaluated.
Pin kyverno-json 0.0.3 in ci/versions.env (0.0.5 has no upstream release;
0.0.3 is what run-l0.sh and the devcontainer already use).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Bake the conformance harness toolchain into infra/devcontainer so `make -C ci gate`
runs identically here and in CI:
- Containerfile: install kyverno CLI (1.13.4), kyverno-json, chainsaw (0.2.12),
yamllint (1.35.1), check-jsonschema (0.29.4), yq (4.44.6) via new pinned RUN block;
add diffutils + python3-pip; drop stale LIBVIRT_DEFAULT_URI; refresh header for the
Proxmox(bpg)+conformance toolbox; extend /etc/dev-toolchain-versions provenance.
- versions.env: add KYVERNO/KYVERNO_JSON/CHAINSAW/YAMLLINT/YQ/CHECK_JSONSCHEMA;
align KUBECTL 1.32.0 -> 1.31.4. dev.sh build(): pass the new --build-args.
- ci/versions.env: pin CHECK_JSONSCHEMA_VERSION=0.29.4 (single source of truth).
Fix harness seams so the gate can run:
- dev.sh run(): mount the sibling spec repo (home-network-k3s) read-only at
/home-network-k3s for ci/spec-immutability.sh (R-TEST-06); conditional so the
container still runs without it.
- conformance/lib/common.sh conf_dirs_for_layer(): accept a comma/space list of
layers and union the dirs, so ci/conformance.sh `run.sh --layer l2,l3` selects
both layers in one pass (backward compatible for single layers).
NOTE: ci/versions.env pins KYVERNO_JSON_VERSION=0.0.5, which has no upstream release
(max tag is v0.0.3; platform/kyverno/scripts/run-l0.sh already defaults to v0.0.3).
Baked v0.0.3 and flagged for PM to correct ci/versions.env. kyverno-json is not used
by any static gate stage.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- drop stale libvirt socket mount + LIBVIRT_DEFAULT_URI (old KVM cluster)
- auto-open an SSH tunnel (local :16443 -> primary 127.0.0.1:6443 over the
pfSense SSH NAT) on each run so kubectl/flux/helm reach the cluster with no
manual setup; DEV_NO_TUNNEL=1 opts out, K3S_SSH_* env overrides the NAT front
- refresh header/usage comments (bpg/proxmox, not dmacvicar/libvirt)
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- inventory routes SSH via 192.168.2.102:2250/2251/2252; new k3s_node_ip carries
each node's real 192.168.1.x for --node-ip / k3s_api_host / Cilium parity
- dev.sh bind-mounts ~/.config/home-k3s/ansible-vault-pass (ro) so vaulted
playbooks can run in the pinned container (ansible.cfg vault_password_file)
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- ansible hosts.ini: node ansible_host -> 192.168.1.50/.51/.52, with a
clear note that the PM may need to swap these for the pfSense
NAT-forwarded address:port once that NAT rule exists (not guessed here).
k3s_api_host derives from the inventory, so it follows automatically.
- Cilium CiliumLoadBalancerIPPool -> 192.168.1.53-.60 (matches the tofu
cilium_l2_vip reservation on the new LAN).
- CiliumL2AnnouncementPolicy: broaden interface selector to ^e(n|th) so
the Proxmox NIC name (ens18/eth0) need not be pinned; flagged
verify-at-bringup.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
bpg/proxmox generates cloud-init network-config (static IP/gw/DNS) and
meta-data natively from the VM initialization block, so remove
network-config.yaml.tftpl and meta-data.yaml.tftpl. The rich first-boot
baseline (users, SSH key, packages, kernel modules, Longhorn /dev/vdb
mount, swap-off) is preserved and shipped as a user-data snippet
referenced by initialization.user_data_file_id. Comments updated
(libvirt -> Proxmox); /dev/vdb still valid (data disk is virtio1).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Replace the dmacvicar/libvirt provider + resources with the modern
bpg/proxmox provider. The dev cluster moves off the memory-constrained
local libvirt host onto the Proxmox VE box.
- versions.tf: pin bpg/proxmox ~> 0.66; provider reads auth from env
(PROXMOX_VE_*, token never a tofu var) and normalizes a schemeless
PROXMOX_VE_ENDPOINT (prepend https://) to avoid the :8006 HTTP 301.
- variables.tf: Proxmox placement vars (node=proxmox, datastore=Storage,
image_datastore=local, bridge=vmbr0); LAN 192.168.1.0/24 gw .1 DNS .18;
node_ips .50/.51/.52; sizing 6 vCPU / 16384 MiB / 40+100 GiB; cpu_type
host; Cilium VIP range .53-.60.
- main.tf: proxmox_virtual_environment_download_file (cloud image -> local),
per-node user-data snippet (proxmox_virtual_environment_file), and
proxmox_virtual_environment_vm per node via name-keyed for_each (imported
OS disk virtio0, blank data disk virtio1, native initialization ip_config
+ dns + user_data_file_id).
- remove moved.tf (libvirt-specific count->for_each state migration).
Authoring only; no apply. Traces R-ENV-01, R-PLAT-01.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The 3x 6GB nodes are OOM (k3s-dev-2's kubelet stopped; dev-1/dev-3 <600MB free). KubeVirt runs
a full control plane (~1.5-2GB) for ZERO running VMs — its IaaS conformance (R-PLAT-03/04,
R-NET-01, R-STATE-01) is already certified, so disabling the running pods loses no delivered
capability. Re-enable (uncomment kubevirt in platform + platform-config) once the VMs' RAM is
grown. Manifests retained; reversible.
Root cause the media stack surfaced: the default-deny baseline is DNS-only egress (correct for
R-NET-01 east-west), but the egress CLASS (internet/vpn) had no policy ALLOWING north-south
egress — so qbittorrent/sonarr/radarr couldn't reach the internet at all (VPN downloaders
broken). Add an additive per-app CiliumNetworkPolicy '<app>-allow-internet-egress' with
toEntities:[world] (non-cluster); the egress-class steering + kill-switch (ADR-0015) govern the
PATH (internet=WAN, vpn=tun0). East-west stays denied except declared dependencies; R-NET-01
baseline unchanged. Re-rendered all apps + regenerated L1 goldens. Also fixed jackett + plex
image tags (bad pins -> :latest; Renovate/update policy pins later).
jakman85andClaude Opus 4.8