jakman85andClaude Opus 5
8e017fad91
main became a protected branch on 2026-09-29, so the direct push that 37 of 39 runbooks instructed is REJECTED. The wording was merely stale before; it is now actively wrong, and it is the line an operator reads mid-incident. Every occurrence now describes the real path: push a branch, open a PR, merge once the gate is green -- that merge is the deploy. 35 files shared one identical block; flux-reconcile.md, README.md and plex-claim.md each said it their own way and were corrected individually. plex-claim.md is rewritten around the delivery loop and records that THE SERVER IS NOW CLAIMED (PlexOnlineToken present in /config), so PLEX_CLAIM is a permanent no-op and the page only applies after a /config wipe. Adds infra/plex/claim-ship.sh, which drives branch -> commit -> push -> PR -> gate -> merge -> reconcile -> pod roll -> verdict with a stopwatch. Three steps are easy to lose under time pressure and two are SILENT when skipped: --with-source (without it the Kustomization applies the previously-fetched revision), the mandatory rollout restart (only the ciphertext changes, so the pod template is byte-identical and nothing restarts itself), and the feat/ branch prefix (act_runner capacity is 1, and a prefix inside gate.yml's push trigger fires a redundant run that serialises ahead of the PR run). Drops the "~4-minute TTL" the page asserted in four places. It was uncited, and upstream pms-docker documents no expiry at all. The countdown on plex.tv/claim is the authority. Measured loop: ~2m45s. DECISIONS-LOG carries the PM handoff: both halves of the 2026-08-31 CI claim were false, the stale-.runner root cause, the four-deep Flux dependency cascade, and the correction that a skipped Gitea job reports success rather than hanging. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.