jakman85andClaude Opus 5
e623d27e2d
roles/k3s_server, roles/cilium and every node-host playbook hardcoded the dev group
names k3s_primary/k3s_secondary/k3s_servers, so the prod inventory groups could not be
selected at all. That broke the R-ENV-02 promise that prod reuses the SAME roles, and
blocked PROD-PROVISIONING.md §6 outright.
TWO KNOBS, deliberately separate — Ansible templates a play's `hosts:` BEFORE any host
context exists, so group_vars is unreadable there, while roles run WITH host context:
* which hosts a play RUNS ON — k3s_hosts, k3s_primary_hosts/k3s_secondary_hosts
(k3s.yml's split), vpn_egress_gateway_hosts; each `| default(<dev group>)`, set by -e
only. Follows node-health.yml's established `<name>_hosts | default(dev)` pattern.
* which group a ROLE means by "my primary"/"my servers" — k3s_primary_group,
k3s_servers_group in group_vars/all.yml (dev), overridden in group_vars/k3s_prod.
Follows the k3s_api_host convention already in this repo. No per-run flag.
DEV IS UNCHANGED — the key evidence. --list-hosts/--list-tasks/--syntax-check captured
for all 9 playbooks at HEAD and after: sorted host lists IDENTICAL for all 9, same
primary/secondary split, same 6-play site.yml. (Raw --list-hosts PRINT ORDER varies run
to run; proven to be Ansible's own set ordering by running UNMODIFIED HEAD cilium.yml
four times -> 3,1,2 / 1,3,2 / 1,2,3 / 1,2,3. Hence sorted comparison.) --list-tasks
differs in exactly two files, only by added TAGS annotations and one new assert; no task
reordered, renamed or removed. Var resolution verified per environment with -c local:
dev -> k3s_primary/192.168.1.50/sans .50,.49,127.0.0.1,.51,.52; prod ->
k3s_prod_primary/192.168.2.10/vip .9/sans .10,.9,127.0.0.1,.11,.12.
BREAKS THE SMARTMONTOOLS CIRCULAR DEPENDENCY. node_baseline tasks are now tagged
packages/system/disks, so the package install can run alone:
ansible-playbook playbooks/node-baseline.yml -e k3s_hosts=k3s_prod --tags packages
Skipping is the guard — no disks-tagged task is selected, so the
BLOCKED-pending-disk-decision paths are never templated, let alone passed to mkfs.
Belt-and-braces, a new disks-tagged assert fires first in a FULL run and names §2
explicitly instead of failing obscurely at mkfs. `tags: never` was deliberately NOT used
(it would change the default run).
FOOTGUN FOUND AND FIXED: roles/cilium, cluster_verify and flux_bootstrap all hardcoded
.cache/dev.kubeconfig — the exact file infra/devcontainer/dev.sh exports as $KUBECONFIG.
Once prod became targetable, a prod cilium/verify run would have SILENTLY OVERWRITTEN it,
leaving the operator's kubectl quietly answering from PROD. Now cluster_kubeconfig_name
(dev.kubeconfig -> prod.kubeconfig). Dev path byte-identical.
KNOWN, DOCUMENTED, NOT FIXED HERE: flux-bootstrap.yml retargets but roles/flux_bootstrap
shells out to bootstrap/flux/bootstrap.sh with a hardcoded --path=clusters/dev — a
bootstrap/ subtree change, not a target-group change (§6, cross-referenced to §7).
vpn.egress.gateway.yml is parameterised but prod has no egress group yet and would need
its own vaulted PIA credentials. --check against prod is still impossible until the prod
vault exists — even the packages-only run needs it.
Nothing was run against the dev cluster: --list-hosts/--list-tasks/--syntax-check, plus
debug/assert with -c local, only.
Serves: R-ENV-01, R-ENV-02, R-ENV-03. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.