jakman85andClaude Opus 5
1a67fc1b3c
Lets the operator's Android / Linux / Windows / macOS devices dial in from anywhere and behave like LAN machines: full reach to 192.168.2.0/24 plus internet egress out the house WAN. Opposite direction to platform/vpn-egress, which sends pods OUT through PIA; the two share nothing but the word "VPN". WireGuard because it is the only option with a first-party client on all four named platforms, and because its handshake MAC is keyed with the responder's own public key: an unauthenticated packet gets NO reply, so udp/51820 is indistinguishable from a closed port. That, not "it is encrypted", is what makes an unfiltered WAN port defensible, and why there is no source allowlist. hostNetwork: true is REQUIRED, not convenient. A pod-networked server must SNAT clients to its own pod IP, so every remote client would carry that pod's Cilium identity -- and a pod-sourced request to the shared Gateway VIP returns 403 from Envoy for ALL 16 hostnames (measured 2026-10-04), because Cilium's Gateway preserves the original source identity and enforces the destination's ingress policy. The obvious build would have shipped a healthy-looking tunnel on which every cluster web UI was 403 and *.home.keithjackson.dev did not even resolve. In the host netns traffic is SNATed to the node and arrives as host/remote-node, exactly like a LAN client. It also sidesteps the unsafe ip_forward sysctl, the L2-announcement lease lottery, and double encapsulation (hence MTU 1420). Permitted by restrict-host-namespaces' own carve-out for platform namespaces. The cost is stated in networkpolicy.yaml rather than papered over: no NetworkPolicy constrains a hostNetwork pod. A DaemonSet so the hand-made WAN forward cannot be invalidated by a reschedule; all three nodes answer the same keys, so failover is a one-line router change. Peer PUBLIC keys are plaintext in peers.yaml, which makes "who can get into my house" a reviewable PR diff. The only secret -- the server's private key -- is an out-of-band Secret: an agent must not mint a long-lived private key, and the two halves are joined only at pod start into a tmpfs that dies with the pod. Ships INERT-BUT-HEALTHY with zero peers. THREE off-repo manual steps remain (kernel module, server key, WAN forward) -- runbooks/vpn-remote-access.md. Touches clusters/** , so ci/approval-policy.sh will block pending the operator's /approve-override. Deliberately not posted by me (CLAUDE.md §1). Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.