jakman85andClaude Opus 4.8
b4b3bb0922
Cilium 1.20 is mandatory for k8s 1.36. GW-API CRDs v1.4.1->v1.6.1 (direct, never v1.5.x). Co-Authored-By: Claude Opus 4.8 <[email protected]>
95 lines
4.6 KiB
YAML
95 lines
4.6 KiB
YAML
---
|
|
# Cilium — CNI, kube-proxy replacement, Gateway API, Egress Gateway, Hubble (ADR-0002).
|
|
# Serves: R-NET-01..07, R-DNS-01, R-SEC-02. Owner: WS-NET (bootstrap shared with WS-INFRA).
|
|
#
|
|
# ============================ PARITY CONTRACT ============================
|
|
# Cilium's INITIAL install is performed by the Ansible k3s bootstrap (spec docs/02, Phase 1) —
|
|
# a cluster needs a CNI before Flux can run. This HelmRelease ADOPTS and manages Cilium's config
|
|
# thereafter (docs/05). The values below MUST EQUAL the Ansible bootstrap values, or Flux and the
|
|
# bootstrap will fight over the running CNI and break cluster networking.
|
|
#
|
|
# SOURCE OF TRUTH (do not diverge without updating both):
|
|
# infra/ansible/roles/cilium/templates/cilium-values.yaml.j2
|
|
# infra/ansible/roles/cilium/defaults/main.yml (cilium_version, k3s_api_host/port)
|
|
#
|
|
# Every value tagged [parity] below is asserted identical to the Ansible render. If you change one
|
|
# here, change it in the Ansible role in the same PR. (docs/02 Cilium-ownership contract.)
|
|
# ========================================================================
|
|
apiVersion: helm.toolkit.fluxcd.io/v2
|
|
kind: HelmRelease
|
|
metadata:
|
|
name: cilium
|
|
namespace: kube-system
|
|
spec:
|
|
interval: 30m
|
|
chart:
|
|
spec:
|
|
chart: cilium
|
|
# [parity] Pinned to the exact version the Ansible bootstrap installs
|
|
# (cilium_version in roles/cilium/defaults/main.yml). Renovate bumps both together.
|
|
version: "1.20.1"
|
|
sourceRef:
|
|
kind: HelmRepository
|
|
name: cilium
|
|
namespace: kube-system
|
|
install:
|
|
remediation:
|
|
retries: 3
|
|
upgrade:
|
|
remediation:
|
|
retries: 3
|
|
# Values are inlined so the intent (Cilium REPLACES flannel + kube-proxy + Traefik) is visible at
|
|
# the release. MUST equal the Ansible bootstrap render (see PARITY CONTRACT header).
|
|
values:
|
|
# --- kube-proxy replacement (ADR-0001/0002: k3s kube-proxy disabled) ---
|
|
# [parity] MUST equal Ansible: kubeProxyReplacement: true
|
|
kubeProxyReplacement: true
|
|
# [parity] MUST equal Ansible: k8sServiceHost/k8sServicePort = the k3s API endpoint
|
|
# (k3s_api_host/k3s_api_port). This is the primary control-plane node IP (192.168.1.50).
|
|
# Setting these wrong breaks Cilium's connection to the API server on adopt.
|
|
k8sServiceHost: "192.168.1.50"
|
|
k8sServicePort: 6443
|
|
# --- Gateway API (ingress; replaces Traefik) — docs/09, ADR-0002 ---
|
|
# [parity] MUST equal Ansible: gatewayAPI.enabled: true
|
|
gatewayAPI:
|
|
enabled: true
|
|
# --- Egress Gateway (egress-class steering; part of the VPN model, ADR-0013) ---
|
|
# [parity] MUST equal Ansible: egressGateway.enabled: true
|
|
egressGateway:
|
|
enabled: true
|
|
# --- Masquerade (REQUIRED by Egress Gateway) — Phase-1 crash fix ---
|
|
# [parity] MUST equal Ansible: enableIPv4Masquerade: true + bpf.masquerade: true.
|
|
# This exact pairing (ipv4 masquerade via eBPF, the correct companion to kubeProxyReplacement)
|
|
# was the fix for the Phase-1 agent crash. Enabling one without the other regresses it —
|
|
# keep both, and keep them equal to the Ansible values.
|
|
enableIPv4Masquerade: true
|
|
bpf:
|
|
masquerade: true
|
|
# --- Hubble (flow observability / isolation audit) ---
|
|
# [parity] MUST equal Ansible: hubble.{enabled,relay.enabled,ui.enabled}: true
|
|
hubble:
|
|
enabled: true
|
|
relay:
|
|
enabled: true
|
|
ui:
|
|
enabled: true # exposure gated behind oauth2-proxy forward-auth later (ADR-0014)
|
|
# --- L2 announcement for the ingress VIP on the flat LAN (docs/09, OQ-1 resolved) ---
|
|
# [parity] MUST equal Ansible: l2announcements.enabled: true. IP pool +
|
|
# CiliumL2AnnouncementPolicy (reserved 10.73.0.240-.250) authored by WS-NET in Phase 2.
|
|
l2announcements:
|
|
enabled: true
|
|
# --- cgroup: k3s ships its own cgroup mount; point Cilium at it, don't auto-mount ---
|
|
# [parity] MUST equal Ansible cgroup block. Not in the deliverable's headline list, but it IS
|
|
# part of the working CNI config on k3s: reconciling without it lets Cilium try to auto-mount
|
|
# cgroupv2 and break on adopt. Kept in parity for a safe Phase-2 adoption.
|
|
cgroup:
|
|
autoMount:
|
|
enabled: false
|
|
hostRoot: /run/cilium/cgroupv2
|
|
# NOTE (NON-parity): operator.replicas is deliberately omitted here. The Ansible dev render sets
|
|
# replicas: 1 to save RAM, but defaults/main.yml declares it explicitly NOT a parity field
|
|
# (Flux/prod may differ). Only the [parity] values above must match the bootstrap.
|
|
#
|
|
# TODO(WS-NET, Phase 2): default-deny baseline, CiliumL2AnnouncementPolicy + IP pool,
|
|
# Egress Gateway policies, Hubble metrics export to kube-prometheus-stack.
|