jakman85andClaude Opus 5
9275dae6e0
PR #15 renamed the Actions secret to SETTINGS_API_TOKEN because Gitea RESERVES the GITEA_ prefix and rejects such a name with HTTP 400 "invalid secret name" -- the defect that left the branch-protection detector inert and unnoticed. The README in this very directory, which documents that story, went on naming the illegal name in its behaviour table and in its closing "remaining step" line. Both now say SETTINGS_API_TOKEN, plus a note recording what ci/gitea-settings.sh ACTUALLY does, quoted from the file rather than assumed: TOKEN="${SETTINGS_API_TOKEN:-${GITEA_SETTINGS_TOKEN:-}}" GITEA_SETTINGS_TOKEN is still honoured, but ONLY as an environment variable for a local run -- it can never be the CI wiring, because the secret that would feed it cannot be created at all. The closing line also predated PR #15 storing the secret; it now says so. Documentation only. No behaviour change. NOT fixed here, because it is outside this PR's diff: ci/gitea-settings.sh:45 still instructs the reader to "create a Gitea repo secret GITEA_SETTINGS_TOKEN", which is impossible. Same defect, different file -- worth its own one-line change. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.