jakman85andClaude Opus 5
a209a618fd
An in-cluster consumer reaches a service by its *.svc.cluster.local name, which is by design a different path from how a client outside the cluster reaches the same service. pm-worker's host allowlist accepted TWO values: the cluster-local name and the external hostname gitea.home.keithjackson.dev. The second is removed. It was never needed — nothing sets it — it would route in-cluster traffic out through the Gateway and back for no reason, and as an ACCEPTED value it widened the allowlist to a host reachable over the namespace's world:443 egress rule, which is precisely the injection shape the allowlist exists to refuse. probe-validation.sh now pins that: 20 refusals, including the external hostname, the cluster-local name over https, and the cluster-local name on the wrong port. Also corrects a remark in the handoff entry: I cited cluster-vars' GATEWAY_VIP (192.168.1.53) as suspicious next to the nodes' 192.168.2.x. That was noise — those base cluster-vars values are dev-era leftovers for a decommissioned cluster and say nothing about prod. None of the measured facts depended on it. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.