jakman85andClaude Opus 4.8
ac32f01f7b
Stand up a single-node/single-drive MinIO S3 endpoint on the Proxmox host as the off-cluster backup target for Velero (R-STATE-03) and CloudNativePG (R-IDP-05). Ansible (author + executed): - roles/minio_backup_target + playbooks/backup-minio.yml — idempotent, additive only: ZFS dataset Storage/k3s-backups (zstd, quota=100G, /mnt/Storage/k3s-backups, no sharenfs); minio system user; pinned+checksummed MinIO/mc binaries (fetched on the controller since the host has no WAN, copied to host); hardened systemd unit bound to the host's cluster-reachable LAN IP (auto-discovered) on :9000; velero + cnpg buckets; a non-root access key scoped by IAM policy to only those two buckets. - inventory: new [proxmox_hosts] group ([email protected].2.102); overrides the cluster-wide ansible_user. Does not disturb existing k3s node entries. - group_vars/proxmox_hosts/vault.yml (ansible-vault): root + scoped MinIO creds. GitOps hand-off: - platform/backup/minio-credentials.sops.yaml (+ .example) — SOPS/age-encrypted endpoint + scoped key/secret for the Velero/CNPG wiring (WS-STORAGE/WS-SEC). Not yet wired into a kustomization (left for the consuming agents). Verified live: dataset props correct; minio active+enabled bound to 192.168.1.9:9000; S3 endpoint http://192.168.1.9:9000/minio/health/ready returns 200 from an in-cluster pod; buckets velero+cnpg present; scoped key created+policy attached; re-run is idempotent. Co-Authored-By: Claude Opus 4.8 <[email protected]>
48 lines
2.6 KiB
INI
48 lines
2.6 KiB
INI
# Static inventory — k3s node IPs ALIGNED with infra/tofu defaults (Proxmox migration IPs),
|
|
# but the SSH target is the pfSense NAT (see NAT HAND-OFF below) — this file is
|
|
# HAND-MAINTAINED and must NOT be regenerated from `tofu output -raw ansible_inventory`.
|
|
#
|
|
# k3s_primary = the --cluster-init server (embedded-etcd founder + Cilium k8sServiceHost).
|
|
# k3s_secondary = the two servers that join it. All three are servers (HA embedded etcd).
|
|
#
|
|
# NAT HAND-OFF (LIVE): the nodes live on the Proxmox LAN at 192.168.1.50/.51/.52, and
|
|
# Ansible reaches them over the pfSense NAT at 192.168.2.102, port-forwarded as
|
|
# 2250 -> 192.168.1.50:22, 2251 -> 192.168.1.51:22, 2252 -> 192.168.1.52:22.
|
|
# Therefore `ansible_host`/`ansible_port` below are the NAT SSH target (192.168.2.102:225x),
|
|
# and each node's REAL 192.168.1.x lives in the `k3s_node_ip` var — consumed for the k3s
|
|
# --node-ip, the API/tls-san endpoint (k3s_api_host), and general in-cluster parity.
|
|
# This file is HAND-MAINTAINED for the NAT: do NOT blindly regenerate it from
|
|
# tofu output -raw ansible_inventory
|
|
# because tofu has no knowledge of the pfSense NAT and would overwrite the mapping below.
|
|
|
|
[k3s_primary]
|
|
k3s-dev-1 ansible_host=192.168.2.102 ansible_port=2250 k3s_node_ip=192.168.1.50
|
|
|
|
[k3s_secondary]
|
|
k3s-dev-2 ansible_host=192.168.2.102 ansible_port=2251 k3s_node_ip=192.168.1.51
|
|
k3s-dev-3 ansible_host=192.168.2.102 ansible_port=2252 k3s_node_ip=192.168.1.52
|
|
|
|
[k3s_servers:children]
|
|
k3s_primary
|
|
k3s_secondary
|
|
|
|
# The hypervisor/workstation host itself (target of host-prereqs.yml). Its become
|
|
# (sudo) password comes from the vaulted group_vars/hypervisor/vault.yml.
|
|
[hypervisor]
|
|
localhost ansible_connection=local
|
|
|
|
# VPN egress-gateway node(s) — run the node-level split-tunnel OpenVPN + kill-switch
|
|
# (ADR-0015, playbooks/vpn.egress.gateway.yml). Initially just k3s-dev-3 (single gateway;
|
|
# add a second host here for Cilium Egress Gateway HA). Members are already defined above
|
|
# with their ansible_host under k3s_secondary; this group only tags the egress role target.
|
|
[vpn_egress_gateway]
|
|
k3s-dev-3
|
|
|
|
# The Proxmox HYPERVISOR host itself (NOT a k3s node) — target of playbooks/backup-minio.yml,
|
|
# which stands up the off-cluster MinIO S3 backup target for Velero + CNPG. Reached DIRECTLY
|
|
# over SSH as root (its own 192.168.2.102:22, the pfSense NAT to the host's 192.168.1.9), so
|
|
# it overrides the cluster-wide `ansible_user: k3s` from group_vars/all.yml. Distinct from the
|
|
# `hypervisor` group above (that is `localhost` for host-prereqs.yml, a different machine).
|
|
[proxmox_hosts]
|
|
proxmox ansible_host=192.168.2.102 ansible_port=22 ansible_user=root ansible_ssh_private_key_file=~/.ssh/home_network
|