jakman85andClaude Opus 5
989649e64a
The requirement is log visibility only -- which address connected to Plex.
Plex's own log cannot show it. Every LoadBalancer Service here is
externalTrafficPolicy: Cluster, so the node holding the VIP's L2 lease SNATs
the client before forwarding to the backend pod. Measured: Plex had logged
3,214 requests from 10.0.1.x (lease holder k3s-prod-3's own address, Cilium
identity 1 = reserved:host) and ZERO from any 192.168.x address, ever. No
X-Forwarded-For either -- it serves raw tcp/32400, not HTTP via the Gateway.
Nothing on the router does this; there is no hairpin NAT. It is Cilium.
The address is not lost, only unrecorded. Cilium observes the flow at ingress,
BEFORE its own translation, so Hubble already has it:
192.168.2.133 -> 10.0.0.135 real LAN client -> the Plex pod
10.0.1.78 -> 10.0.0.135 same traffic post-SNAT, what Plex sees
What was missing is RETENTION: 4095/4095 flows at ~303/s is about thirteen
seconds of history, metrics disabled, no exporter configured.
So enable the static exporter, port-scoped, to the agent's stdout -- Alloy
already tails every pod into Loki, so this needs no new mount, no rotation
handling and no Alloy change.
{namespace="kube-system", app="cilium"} |= "32400"
Scoped BY PORT, not namespace, on evidence: --to-namespace plex returned only
the post-SNAT flows; the record carrying the real client address did not match
it. A namespace filter would drop exactly what this exists to capture.
Rejected, with reasons: eTP:Local is incompatible with cilium 1.20's L2
announcer per upstream docs for this version ("may cause service IPs to be
announced on nodes without pods causing traffic drops") -- and the VIP is on
prod-3 while the pod is on prod-1, so it would black-hole 32400 immediately;
making it safe costs Plex its ability to reschedule. DSR: routing-mode is
vxlan, not native/geneve, and DSR returns bypass the ingress node, breaking
the router's stateful NAT on the remote path.
Also corrects the repo's own record: 2026-10-03 says the SNAT lands in
192.168.0.0/16 (the node's LAN address). It is 10.0.1.x, the cilium_host
inside the pod CIDR -- which is why LanNetworksBandwidth can never separate
local from remote while eTP is Cluster.
UNVERIFIED and stated in the handoff: nothing is reconciled; `filePath: stdout`
is taken from a verbatim upstream sentence but not confirmed against 1.20.1
source (a wrong notation is a silent no-op, with the file+Alloy fallback
documented); the port FlowFilter has no upstream example; and this change
ROLLS CILIUM -- prod-3 announces the Gateway, PiHole DNS and Plex VIPs, so a
lease move during the rollout could briefly interrupt LAN DNS.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.