jakman85andClaude Opus 4.8
1ff25318c9
- inventory routes SSH via 192.168.2.102:2250/2251/2252; new k3s_node_ip carries each node's real 192.168.1.x for --node-ip / k3s_api_host / Cilium parity - dev.sh bind-mounts ~/.config/home-k3s/ansible-vault-pass (ro) so vaulted playbooks can run in the pinned container (ansible.cfg vault_password_file) Co-Authored-By: Claude Opus 4.8 <[email protected]>
40 lines
2.0 KiB
INI
40 lines
2.0 KiB
INI
# Static inventory — k3s node IPs ALIGNED with infra/tofu defaults (Proxmox migration IPs),
|
|
# but the SSH target is the pfSense NAT (see NAT HAND-OFF below) — this file is
|
|
# HAND-MAINTAINED and must NOT be regenerated from `tofu output -raw ansible_inventory`.
|
|
#
|
|
# k3s_primary = the --cluster-init server (embedded-etcd founder + Cilium k8sServiceHost).
|
|
# k3s_secondary = the two servers that join it. All three are servers (HA embedded etcd).
|
|
#
|
|
# NAT HAND-OFF (LIVE): the nodes live on the Proxmox LAN at 192.168.1.50/.51/.52, and
|
|
# Ansible reaches them over the pfSense NAT at 192.168.2.102, port-forwarded as
|
|
# 2250 -> 192.168.1.50:22, 2251 -> 192.168.1.51:22, 2252 -> 192.168.1.52:22.
|
|
# Therefore `ansible_host`/`ansible_port` below are the NAT SSH target (192.168.2.102:225x),
|
|
# and each node's REAL 192.168.1.x lives in the `k3s_node_ip` var — consumed for the k3s
|
|
# --node-ip, the API/tls-san endpoint (k3s_api_host), and general in-cluster parity.
|
|
# This file is HAND-MAINTAINED for the NAT: do NOT blindly regenerate it from
|
|
# tofu output -raw ansible_inventory
|
|
# because tofu has no knowledge of the pfSense NAT and would overwrite the mapping below.
|
|
|
|
[k3s_primary]
|
|
k3s-dev-1 ansible_host=192.168.2.102 ansible_port=2250 k3s_node_ip=192.168.1.50
|
|
|
|
[k3s_secondary]
|
|
k3s-dev-2 ansible_host=192.168.2.102 ansible_port=2251 k3s_node_ip=192.168.1.51
|
|
k3s-dev-3 ansible_host=192.168.2.102 ansible_port=2252 k3s_node_ip=192.168.1.52
|
|
|
|
[k3s_servers:children]
|
|
k3s_primary
|
|
k3s_secondary
|
|
|
|
# The hypervisor/workstation host itself (target of host-prereqs.yml). Its become
|
|
# (sudo) password comes from the vaulted group_vars/hypervisor/vault.yml.
|
|
[hypervisor]
|
|
localhost ansible_connection=local
|
|
|
|
# VPN egress-gateway node(s) — run the node-level split-tunnel OpenVPN + kill-switch
|
|
# (ADR-0015, playbooks/vpn.egress.gateway.yml). Initially just k3s-dev-3 (single gateway;
|
|
# add a second host here for Cilium Egress Gateway HA). Members are already defined above
|
|
# with their ansible_host under k3s_secondary; this group only tags the egress role target.
|
|
[vpn_egress_gateway]
|
|
k3s-dev-3
|