PR #69 claimed a node cannot reach a LoadBalancer VIP whose Cilium L2 announcement
lease it holds, and excluded the VPN ingress node from announcing on that basis.
The claim makes a sharp prediction; today's power-cycle put ALL EIGHT
cilium-l2announce-* leases on k3s-prod-1, and the prediction failed.
Measured 2026-10-17 from the wireguard pod's host netns on each node: the holder
reaches 192.168.2.20/.22/.23/.24 normally (curl 200 in 18ms on .20) while its
ip neigh for every one of them sits at FAILED. The asserted cause is present
without the asserted effect, which falsifies it. .21 (unifi) fails from all three
nodes and is a separate pre-existing fault.
It is inert because no path resolves a VIP by ARP: cilium-dbg reports
KubeProxyReplacement on [eno1, wg0] and programs 192.168.2.20:443 =>
127.0.0.1:13606, so VIPs are DNAT'd in BPF before any neighbour lookup, on the
forwarded path as well as the host one.
Both probes behind the original diagnosis were bad. `ip neigh` FAILED is
permanent and harmless, and a ping artefact. `curl --interface wg0` — the control
used to rule out a host-netns artefact — fails on all three nodes, including ones
whose ARP resolves, so it discriminates nothing. The deeper error: a MASQUERADEd
client is FORWARDED while every pod-runnable probe is socket-originated. Sharing
a netns is not sharing a hook.
Reverted the policy nodeSelector, the Ansible node label, both alerts, their
promtool tests and the kube-state-metrics allowlist entry. Kept documentation
only: the measurements, which probes lie, and the fact that the forwarded path
remains unmeasured without a connected client.
Also recorded, for the reported "LAN and cluster work, internet does not":
new-peer.sh has emitted a FULL tunnel (0.0.0.0/0) by default since f92707f, so
there is no full-tunnel option to add and no code change is made. The server side
is capable — ip_forward=1, the 10.90.0.0/24 MASQUERADE present with an empty
CILIUM_POST_nat ahead of it, FORWARD accepts, default route intact, nodes reach
1.1.1.1. A full tunnel egresses the HOUSE WAN, not PIA: the egress policy selects
pods by egress-class=vpn, this pod is labelled internet, and tun0 exists on
k3s-prod-3 only. Root cause NOT found; no client has connected since the
power-cycle (0 forwarded packets, no handshake), so it is not reproducible here.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
decisions/ — the handoff log, one file per entry
This directory is the decision log. ../DECISIONS-LOG.md is the frozen archive of
everything written before 2026-09-29 and is never edited again (see "The archive is
frozen" below).
Why this exists
DECISIONS-LOG.md was append-only in a single file, and every agent appended to its
tail. Two branches that both append hit the same last hunk, so git cannot
auto-merge them: the second one to be reviewed conflicts, and so does the third, and
the fourth. Measured on 2026-09-29: four of the five open PRs were unmergeable, and
DECISIONS-LOG.md was the only conflicting file in all four:
#22 fix/crafty-oauth2-proxy-signin CONFLICT (content): DECISIONS-LOG.md
#20 feat/conformance-job-template CONFLICT (content): DECISIONS-LOG.md
#19 feat/conformance-trigger-kubeconfig CONFLICT (content): DECISIONS-LOG.md
#18 feat/conformance-runner-image CONFLICT (content): DECISIONS-LOG.md
#17 feat/ci-is-the-approver clean (it touched no log entry)
Nothing was wrong with any of those changes. The log's storage format serialised work that was otherwise parallel, and it got worse with every concurrent branch: N branches produce N-1 rebases, each of which invalidates any gate run that preceded it.
The fix is the obvious one for concurrent appenders: stop sharing a file. Each
handoff is its own file. Two agents writing handoffs touch disjoint paths, so there is
nothing for git to merge and nothing to conflict. This scales to any number of parallel
branches with zero coordination — which is the point, since the agents are deliberately
isolated from each other in separate worktrees (required by CLAUDE.md §0) and cannot
coordinate.
There is deliberately no index file and no counter. An index would be a shared
mutable file — exactly the thing that just failed — and a sequence number would have
two agents racing for 0043. The directory listing is the index.
Writing an entry
One file per handoff, named:
decisions/YYYY-MM-DD-<slug>.md
<slug> is lowercase [a-z0-9-]. Use your branch name's last segment — it is
already unique per unit of work, which is precisely the property the filename needs.
A branch fix/crafty-oauth2-proxy-signin handed off on 2026-09-29 writes:
decisions/2026-09-29-crafty-oauth2-proxy-signin.md
The file is YAML frontmatter followed by three required sections:
---
date: 2026-09-29
branch: fix/crafty-oauth2-proxy-signin
title: The Keycloak gate works — Crafty's own login was the wall
---
## What changed
Prose. What you actually did, and why.
## What I verified
The measurements, with their numbers. Quote the field you read, not the prose you
believed. Name the gate result and its exit code.
## What I did NOT verify
Everything else. An honest "UNVERIFIED" is worth more than an optimistic "green" —
this repo has been burned by the difference more than once.
All three headings are required and enforced (ci/decisions-log.sh). They are
CLAUDE.md §7's contract; making them a checked structure is what stops an entry
degrading into "done ✅".
Reading the log
The whole log, oldest first:
ls decisions/[0-9]*.md | sort
The current PM handoff — the newest entry. Ties within a day are broken by what landed
on main last, which is the honest answer, so ask git rather than the filename:
git log --diff-filter=A --format='%H' --name-only -- 'decisions/[0-9]*.md' \
| grep '^decisions/' | head -1
For a quick skim of who said what:
grep -H '^title:' decisions/[0-9]*.md | sort
The archive is frozen
DECISIONS-LOG.md is read-only history. Its SHA-256 is pinned in
decisions/ARCHIVE.sha256 and ci/decisions-log.sh fails the merge gate if the file
changes. That is not ceremony: without it, the next agent to read runbooks/ or an old
CLAUDE.md habit appends to the tail again and re-creates the conflict for everybody
else, silently, one PR at a time.
If the archive genuinely must change (a leaked credential to redact, say), that is a
deliberate, reviewed act: change it, run sha256sum DECISIONS-LOG.md > decisions/ARCHIVE.sha256,
and say in your handoff entry why. Re-pinning is visible in the diff. Appending is not.