jakman85andClaude Opus 5
e82dab5df5
PR #69 claimed a node cannot reach a LoadBalancer VIP whose Cilium L2 announcement
lease it holds, and excluded the VPN ingress node from announcing on that basis.
The claim makes a sharp prediction; today's power-cycle put ALL EIGHT
cilium-l2announce-* leases on k3s-prod-1, and the prediction failed.
Measured 2026-10-17 from the wireguard pod's host netns on each node: the holder
reaches 192.168.2.20/.22/.23/.24 normally (curl 200 in 18ms on .20) while its
ip neigh for every one of them sits at FAILED. The asserted cause is present
without the asserted effect, which falsifies it. .21 (unifi) fails from all three
nodes and is a separate pre-existing fault.
It is inert because no path resolves a VIP by ARP: cilium-dbg reports
KubeProxyReplacement on [eno1, wg0] and programs 192.168.2.20:443 =>
127.0.0.1:13606, so VIPs are DNAT'd in BPF before any neighbour lookup, on the
forwarded path as well as the host one.
Both probes behind the original diagnosis were bad. `ip neigh` FAILED is
permanent and harmless, and a ping artefact. `curl --interface wg0` — the control
used to rule out a host-netns artefact — fails on all three nodes, including ones
whose ARP resolves, so it discriminates nothing. The deeper error: a MASQUERADEd
client is FORWARDED while every pod-runnable probe is socket-originated. Sharing
a netns is not sharing a hook.
Reverted the policy nodeSelector, the Ansible node label, both alerts, their
promtool tests and the kube-state-metrics allowlist entry. Kept documentation
only: the measurements, which probes lie, and the fact that the forwarded path
remains unmeasured without a connected client.
Also recorded, for the reported "LAN and cluster work, internet does not":
new-peer.sh has emitted a FULL tunnel (0.0.0.0/0) by default since f92707f, so
there is no full-tunnel option to add and no code change is made. The server side
is capable — ip_forward=1, the 10.90.0.0/24 MASQUERADE present with an empty
CILIUM_POST_nat ahead of it, FORWARD accepts, default route intact, nodes reach
1.1.1.1. A full tunnel egresses the HOUSE WAN, not PIA: the egress policy selects
pods by egress-class=vpn, this pod is labelled internet, and tun0 exists on
k3s-prod-3 only. Root cause NOT found; no client has connected since the
power-cycle (0 forwarded packets, no handshake), so it is not reproducible here.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.