`instances: 3` alone does not keep the three instances apart. All three Clusters used CNPG's default `podAntiAffinityType: preferred`, which is a scheduler HINT — two instances may share a node whenever that scores better, and they WILL on the path that matters: when CNPG recreates an instance after a node loss, the surviving nodes are the only candidates and one of them already runs an instance. `preferred` is how a 3-instance cluster decays back into the single-node failure domain the previous commit exists to remove. `required` makes it a scheduling constraint. On a 3-node cluster with no spare, the cost is that an instance whose node is gone stays Pending until a node returns. That is correct: a replacement squeezed onto an already-occupied node dies with that node while making the cluster LOOK three-way replicated. 2 of 3 instances still serve and CNPG still promotes. ALSO SETS primaryUpdateMethod: switchover. This is not cosmetic. Changing the affinity changes the instance pod spec, so CNPG performs a rolling update, and the CRD default for primaryUpdateMethod is `restart` (verified against the live CNPG 1.30.0 CRD on both clusters) — a delete-and-recreate of the PRIMARY pod, i.e. tens of seconds of no Postgres. On keycloak-db that is an SSO outage, which also means kubectl OIDC, Grafana, Headlamp, Gitea and forward-auth. With standbys now present, `switchover` promotes an already-updated streaming replica instead, reducing the roll to a connection reset. Known constraint documented in the manifest: under `switchover` the operator rejects an update that changes imageName and a postgresql parameter in the same reconcile. Verified satisfiable before merge (read-only): k3s-prod and k3s-dev each have 3 Ready, schedulable, untainted nodes, and every pgdata PVC already has a Longhorn replica on all three (replica-soft-anti-affinity=false), so any instance can attach from any node. DEV IMPACT: identical, and dev can absorb it. Longhorn dev nodes are 124.9 GiB each with 152.0 GiB already scheduled under a 200% over-provisioning ceiling (249.8 GiB); the six new 5Gi volumes add 30 GiB scheduled per node -> 182.0, still inside the ceiling, and only ~600 MiB per volume is really consumed. Prod is far looser: 239 -> 269 GiB scheduled against a 829 GiB ceiling. THIS IS THE DISRUPTIVE COMMIT of the three. Land it on its own reconcile, after the scale-out has produced two Ready standbys per Cluster, so the blast radius is one clean switchover per database rather than a scale-out and a roll at once. Expect a brief SSO interruption for keycloak-db. Verified: yamllint clean; both tiers render the new fields; field names, types and enum values checked against the live clusters.postgresql.cnpg.io CRD (CNPG 1.30.0, identical on prod and dev). Co-Authored-By: Claude Opus 5 <[email protected]> (cherry picked from commit e1d364238d73e6ee99c9a50108fe8b4e09481a7e)
155 lines
9.1 KiB
YAML
155 lines
9.1 KiB
YAML
---
|
|
# Keycloak's PostgreSQL — a CloudNativePG Cluster (CR of the CNPG CRDs installed by platform/cnpg).
|
|
# CARRIED BY platform-config (dependsOn platform) so the postgresql.cnpg.io CRDs exist first (F-MON1).
|
|
#
|
|
# DR-critical (R-IDP-05): storage on the 3-replica `longhorn` StorageClass (ADR-0003) — the data
|
|
# survives node loss. CNPG creates the keycloak-db-app Secret (keys username/password) that the
|
|
# Keycloak CR consumes, plus the keycloak-db-rw/-ro/-r Services. Keycloak is stateless and rebuilds
|
|
# from this DB + the git-managed realm import (docs/15).
|
|
apiVersion: postgresql.cnpg.io/v1
|
|
kind: Cluster
|
|
metadata:
|
|
name: keycloak-db
|
|
namespace: keycloak
|
|
spec:
|
|
# THREE instances — one primary + two hot standbys, one per node (2026-09-07).
|
|
#
|
|
# WAS `instances: 1`, on ADR-0014's "single replica with DB on Longhorn + backups is acceptable".
|
|
# Longhorn's 3-way replication saves the DATA when a node dies; it does NOT save the SERVICE. With
|
|
# one instance, losing the node means rescheduling the pod, re-attaching the volume and replaying
|
|
# WAL before Postgres will accept a connection again — minutes, and only if scheduling cooperates.
|
|
#
|
|
# WHY NOW (the 2026-09-07 incident): all three CNPG primaries — keycloak-db, nextcloud-db and
|
|
# semaphore-db — were co-resident on k3s-prod-2, because with `instances: 1` nothing in the spec
|
|
# ever said they must not be. One node took out SSO, Nextcloud and Semaphore together, and with
|
|
# SSO went kubectl OIDC, Grafana, Headlamp, Gitea and forward-auth. Three instances give this
|
|
# Cluster something to fail OVER to: CNPG promotes a streaming standby in seconds and repoints the
|
|
# -rw Service, with no volume re-attach and no restore. The `affinity.podAntiAffinityType:
|
|
# required` below is what makes the three land on three DIFFERENT nodes.
|
|
#
|
|
# UNBLOCKED BY WORKING BACKUPS, NOT A SUBSTITUTE FOR THEM. Replicas copy corruption and deletions
|
|
# faithfully; only the Barman archive below is a backup. Adding standbys while archiving was
|
|
# broken would have multiplied the disk-full clock described further down, so this change waited
|
|
# for all three Clusters to report ContinuousArchiving=True with a real firstRecoverabilityPoint.
|
|
#
|
|
# COST: two more 5Gi PVCs here (Longhorn thin-provisions; the live pgdata is ~600 MiB), ~30 GiB
|
|
# PROVISIONED across all three DBs and well under 3 GiB actually consumed. Longhorn allows 200%
|
|
# over-provisioning on both clusters and both have headroom.
|
|
#
|
|
# APPLYING THIS IS NON-DISRUPTIVE: CNPG scales out by creating -2 then -3 sequentially, each
|
|
# seeded by pg_basebackup from the RUNNING primary. The primary is not restarted and clients are
|
|
# not disconnected. (The anti-affinity change is a separate commit precisely because that one DOES
|
|
# cause a switchover — see it for the blast radius.)
|
|
instances: 3
|
|
imageName: ghcr.io/cloudnative-pg/postgresql:16.4
|
|
# HARD anti-affinity — the three instances MUST land on three DIFFERENT nodes (2026-09-07).
|
|
#
|
|
# CNPG's default is `preferred`, which is only a scheduler HINT: the scheduler may put two
|
|
# instances on one node whenever that scores better, and it WILL do so on the path that matters —
|
|
# when CNPG recreates an instance after losing a node, the surviving nodes are the only candidates
|
|
# and one of them already runs an instance. So `preferred` is precisely how `instances: 3` decays
|
|
# back into the single-node failure domain this whole change exists to remove; nothing pins the
|
|
# good layout in place. `required` makes it a scheduling CONSTRAINT instead of a preference.
|
|
#
|
|
# THE TRADE, STATED PLAINLY: on a 3-node cluster with no spare node, an instance whose node is
|
|
# gone stays Pending until a node is available. That is the CORRECT behaviour here. A replacement
|
|
# squeezed onto a node that already hosts an instance buys nothing — both die with that node —
|
|
# while making the cluster LOOK three-way replicated. Availability is unaffected either way:
|
|
# 2 of 3 instances still serve and CNPG promotes one of them.
|
|
#
|
|
# Satisfiable on both clusters: prod and dev each have 3 schedulable, untainted nodes (checked
|
|
# read-only before merge). topologyKey defaults to kubernetes.io/hostname — the failure domain
|
|
# that matters here. enablePodAntiAffinity defaults to true; stated explicitly so this block can
|
|
# be read without knowing the default.
|
|
affinity:
|
|
enablePodAntiAffinity: true
|
|
podAntiAffinityType: required
|
|
# Roll the PRIMARY by SWITCHOVER, not by restarting it in place. CNPG's default for
|
|
# primaryUpdateMethod is `restart`, which deletes and recreates the primary pod — tens of seconds
|
|
# with no Postgres serving, and on THIS database that is an SSO outage. With standbys present
|
|
# (instances: 3 above) a switchover promotes an already-updated, already-streaming replica and
|
|
# demotes the old primary, so the interruption is a connection reset rather than a cold start.
|
|
# This is the field that makes the anti-affinity roll below a switchover rather than an outage.
|
|
#
|
|
# KNOWN CONSTRAINT: under `switchover` the operator REJECTS an update that changes `imageName`
|
|
# AND a postgresql parameter in the same reconcile. Renovate bumping the image alone is fine;
|
|
# never combine an image bump with a postgresql.parameters change in one commit.
|
|
primaryUpdateMethod: switchover
|
|
storage:
|
|
storageClass: longhorn
|
|
size: 5Gi
|
|
bootstrap:
|
|
initdb:
|
|
database: keycloak
|
|
owner: keycloak
|
|
# Emit Postgres metrics so Prometheus scrapes DB health (R-OBS-01). The CNPG operator creates the
|
|
# PodMonitor at runtime (CRD already present from Phase-4 monitoring) — no kustomize CRD-ordering hazard.
|
|
monitoring:
|
|
enablePodMonitor: true
|
|
resources:
|
|
requests:
|
|
cpu: 100m
|
|
memory: 256Mi
|
|
limits:
|
|
memory: 512Mi
|
|
# --- Off-cluster DR backup (R-IDP-05) — CNPG-native Barman → object storage ---
|
|
# Continuous WAL archiving + periodic base backups give proper Postgres PITR (superior to a Velero
|
|
# PVC snapshot for a live DB). CNPG appends `serverName` (defaults to the Cluster name) to
|
|
# destinationPath, so objects land under ${CNPG_BACKUP_PATH}/keycloak-db/ — dev
|
|
# s3://cnpg/keycloak-db/ on the on-Proxmox MinIO, prod s3://k3s-prod-backup/barman/keycloak-db/ on
|
|
# Cloudflare R2. Both endpointURL and destinationPath are cluster-vars knobs (R-ENV-02),
|
|
# substituted by the `platform-config` Kustomization (this file sits under platform/keycloak/ but
|
|
# platform-config is the only tier that lists it as a resource — see its kustomization.yaml).
|
|
# Credentials: the scoped key from the in-namespace SOPS Secret keycloak-db-backup-credentials
|
|
# (a Pod only reads same-ns Secrets).
|
|
#
|
|
# *** archive_mode IS ON, SO A FAILING ARCHIVE COMMAND IS A DISK-FULL CLOCK, NOT A DEGRADED
|
|
# BACKUP. *** Postgres will not recycle a WAL segment it has not successfully archived, so
|
|
# whenever these two values are wrong the pgdata PVC fills monotonically until the primary
|
|
# PANICs. This is not hypothetical: prod ran from bootstrap to 2026-09-07 with
|
|
# `endpointURL: TBD-PROD-S3-BACKUP-ENDPOINT` (barman-cloud-wal-archive exit 4 on every segment)
|
|
# and had burned ~579 MiB of a 5 GiB PVC on the way to taking SSO — and with it kubectl OIDC,
|
|
# Grafana, Headlamp, Gitea and forward-auth — down with it. Never leave a placeholder here, and
|
|
# treat `ContinuousArchiving=False` on this Cluster as an availability incident, not a backup one.
|
|
backup:
|
|
retentionPolicy: "30d" # keep 30 days of base backups + WAL (PITR window); prunes older
|
|
barmanObjectStore:
|
|
destinationPath: ${CNPG_BACKUP_PATH}
|
|
endpointURL: ${S3_BACKUP_ENDPOINT}
|
|
# PER-ENVIRONMENT credential (2026-09-07): dev reads keycloak-db-backup-credentials (MinIO),
|
|
# prod reads keycloak-db-backup-credentials-prod (Cloudflare R2). Both Secrets are applied to
|
|
# both clusters by platform/keycloak/kustomization.yaml; ${BACKUP_CREDENTIALS_SUFFIX} (dev ""
|
|
# | prod "-prod") picks one. Before the split these were ONE shared Secret, so writing prod's
|
|
# R2 token into it would have left dev signing MinIO requests with an R2 key — a 403 on every
|
|
# archive command, which under archive_mode=on is the disk-full clock described above, not a
|
|
# missing backup.
|
|
s3Credentials:
|
|
accessKeyId:
|
|
name: keycloak-db-backup-credentials${BACKUP_CREDENTIALS_SUFFIX}
|
|
key: ACCESS_KEY_ID
|
|
secretAccessKey:
|
|
name: keycloak-db-backup-credentials${BACKUP_CREDENTIALS_SUFFIX}
|
|
key: ACCESS_SECRET_KEY
|
|
wal:
|
|
compression: gzip
|
|
maxParallel: 2
|
|
data:
|
|
compression: gzip
|
|
---
|
|
# Daily base backup of keycloak-db (WAL is archived continuously by the barmanObjectStore above).
|
|
# CNPG cron is 6-field (sec min hour dom mon dow). immediate:true takes a first base backup as soon
|
|
# as the schedule is created so the PITR chain has a starting point. Staggered 01:00 (nextcloud 02:00,
|
|
# semaphore 04:00, Velero 03:00) to avoid concurrent base backups hammering MinIO.
|
|
apiVersion: postgresql.cnpg.io/v1
|
|
kind: ScheduledBackup
|
|
metadata:
|
|
name: keycloak-db-daily
|
|
namespace: keycloak
|
|
spec:
|
|
immediate: true
|
|
schedule: "0 0 1 * * *"
|
|
backupOwnerReference: self
|
|
cluster:
|
|
name: keycloak-db
|
|
method: barmanObjectStore
|