chore(deps): Update quay.io/oauth2-proxy/oauth2-proxy Docker tag to v7.15.6

apps/wave-0/jackett.yaml

@@ -85,7 +85,7 @@ spec:
         - name: config
           mountPath: /config
       - name: oauth2-proxy
-        image: quay.io/oauth2-proxy/oauth2-proxy:v7.8.1
+        image: quay.io/oauth2-proxy/oauth2-proxy:v7.15.6
         imagePullPolicy: IfNotPresent
         args:
         - --http-address=0.0.0.0:4180

apps/wave-0/pihole.yaml

@@ -90,7 +90,7 @@ spec:
               - -c
               - "# Assert the declared adlists in gravity.db. Idempotent: steady state writes nothing and\n# does NOT run a gravity rebuild.\nset -u\nGRAVITY=/etc/pihole/gravity.db\n\n# THE DECLARED SET \u2014 one URL per line, the source of truth for what PiHole blocks.\n# To add a list: add a line here, commit, let Flux reconcile. Nothing else to do.\nDECLARED='https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts'\n\n# On a fresh PVC, FTL creates gravity.db a moment after the container starts. Wait, bounded,\n# and NEVER block or fail the start: a missing DB here must not crashloop DNS for the LAN.\ni=0\nwhile [ ! -s \"$GRAVITY\" ] && [ \"$i\" -lt 90 ]; do sleep 2; i=$(expr $i + 1); done\nif [ ! -s \"$GRAVITY\" ]; then\n  echo \"pihole-adlists: gravity.db absent after 180s - leaving adlists untouched\" >&2\n  exit 0\nfi\n\nsql() { pihole-FTL sqlite3 \"$GRAVITY\" \"$1\"; }\nCHANGED=0\n\n# 1) Every declared URL must be present AND enabled.\necho \"$DECLARED\" | while IFS= read -r url; do\n  [ -n \"$url\" ] || continue\n  printf '%s\\n' \"$url\"\ndone > /tmp/declared.txt\nwhile IFS= read -r url; do\n  [ -n \"$url\" ] || continue\n  # Single quotes inside a URL would break this SQL; adlist URLs do not contain them.\n  have=$(sql \"select count(*) from adlist where address='$url';\")\n  if [ \"$have\" = \"0\" ]; then\n    echo \"pihole-adlists: adding $url\"\n    sql \"insert into adlist (address,enabled,comment) values ('$url',1,'declared in catalog/pihole.yaml');\"\n    CHANGED=1\n  else\n    en=$(sql \"select enabled from adlist where address='$url';\")\n    if [ \"$en\" != \"1\" ]; then\n      echo \"pihole-adlists: re-enabling $url\"\n      sql \"update adlist set enabled=1 where address='$url';\"\n      CHANGED=1\n    fi\n  fi\ndone < /tmp/declared.txt\n\n# 2) Anything enabled in the DB but NOT declared gets disabled (never deleted - see above).\nsql \"select address from adlist where enabled=1;\" | while IFS= read -r addr; do\n  [ -n \"$addr\" ] || continue\n  if ! grep -qxF \"$addr\" /tmp/declared.txt; then\n    echo \"pihole-adlists: disabling undeclared $addr\"\n    sql \"update adlist set enabled=0 where address='$addr';\"\n    echo changed >> /tmp/adlist-changed\n  fi\ndone\n[ -s /tmp/adlist-changed ] && CHANGED=1\nrm -f /tmp/adlist-changed /tmp/declared.txt\n\n# 3) Rebuild gravity ONLY if the declared set actually moved.\nif [ \"$CHANGED\" = \"1\" ]; then\n  echo \"pihole-adlists: declared set changed - running gravity update\"\n  pihole -g || echo \"pihole-adlists: gravity update failed; existing gravity.db retained\" >&2\nelse\n  echo \"pihole-adlists: already matches the declared set - nothing to do\"\nfi\nexit 0\n"
       - name: oauth2-proxy
-        image: quay.io/oauth2-proxy/oauth2-proxy:v7.8.1
+        image: quay.io/oauth2-proxy/oauth2-proxy:v7.15.6
         imagePullPolicy: IfNotPresent
         args:
         - --http-address=0.0.0.0:4180

apps/wave-0/qbittorrent.yaml

@@ -156,7 +156,7 @@ spec:
                 , \"[Preferences]\"\n\ndef matches(raw):\n    \"\"\"True iff the stored digest is one OUR password produces (salt is read from it).\"\"\"\n    v = raw.strip().strip('\"')\n    if v.startswith(\"@ByteArray(\") and v.endswith(\")\"):\n        v = v[len(\"@ByteArray(\"):-1]\n    try:\n        salt_b64, digest_b64 = v.split(\":\", 1)\n        salt = base64.b64decode(salt_b64, validate=True)\n        digest = base64.b64decode(digest_b64, validate=True)\n    except Exception:\n        return False\n    if not salt or not digest:\n        return False\n    return hmac.compare_digest(\n        hashlib.pbkdf2_hmac(\"sha512\", pw.encode(), salt, ITERATIONS, len(digest)), digest)\n\ntry:\n    lines = open(conf, encoding=\"utf-8\", errors=\"replace\").read().splitlines()\nexcept FileNotFoundError:\n    lines = []\n\ndef value_of(key):\n    for i, line in enumerate(lines):\n        if line.startswith(key + \"=\"):\n            return i, line.split(\"=\", 1)[1]\n    return -1, None\n\nui, uval = value_of(UKEY)\npi, pval = value_of(PKEY)\nif uval == user and pval is not None and matches(pval):\n    raise SystemExit(0)          # converged - leave the file (and its salt) alone\n\nsalt = os.urandom(SALT_LEN)\ndigest = hashlib.pbkdf2_hmac(\"sha512\", pw.encode(), salt, ITERATIONS, DIGEST_LEN)\nstored = base64.b64encode(salt).decode() + \":\" + base64.b64encode(digest).decode()\ndesired = [UKEY + \"=\" + user, PKEY + '=\"@ByteArray(' + stored + ')\"']\n\nout = [line for i, line in enumerate(lines) if i not in (ui, pi)]\nif SECTION in out:\n    at = out.index(SECTION) + 1\nelse:\n    if out and out[-1].strip():\n        out.append(\"\")\n    out.append(SECTION)\n    at = len(out)\nout[at:at] = desired\n\ntry:\n    os.makedirs(os.path.dirname(conf) or \".\", exist_ok=True)\n    tmp = conf + \".webui-cred.new\"\n    with open(tmp, \"w\", encoding=\"utf-8\") as fh:\n        fh.write(\"\\n\".join(out) + \"\\n\")\n        fh.flush()\n        os.fsync(fh.fileno())\n    # This hook runs as ROOT; the service runs as PUID:PGID. A root-owned 0600 conf would\n    # cost the app the ability to save its own settings, so carry the ownership over.\n    try:\n        st = os.stat(conf)\n        os.chown(tmp, st.st_uid, st.st_gid)\n        os.chmod(tmp, stat.S_IMODE(st.st_mode))\n    except FileNotFoundError:\n        os.chown(tmp, int(os.environ.get(\"PUID\", \"1000\")),\n                 int(os.environ.get(\"PGID\", \"1000\")))\n        os.chmod(tmp, 0o664)\n    os.replace(tmp, conf)        # atomic: the app never reads a half-written conf\nexcept OSError as exc:\n    sys.stderr.write(\"[qbt-webui-cred] cannot write %s: %s\\n\" % (conf, exc))\n    raise SystemExit(1)\nraise SystemExit(10)\nPY\n  rc=$?\n\n  if [ \"$rc\" = 0 ]; then\n    log \"conf already holds the durable credential for '$QBT_WEBUI_USERNAME' (no write)\"\n  elif [ \"$rc\" = 10 ]; then\n    log \"asserted WebUI Username + Password_PBKDF2 into $CONF\"\n    # postStart runs CONCURRENTLY with the s6 init chain, so qbittorrent-nox may ALREADY\n    # have read the old, credential-less conf and be serving a random temporary password.\n    # Restart the SUPERVISED SERVICE (not the pod) so it re-reads what was just written.\n    # Nothing to do when the service has not started yet - it will read the new file.\n    # Its own counter, NOT the shared `waited` API budget: sharing one counter is how the\n    # 2026-09-13 failure spent the entire verification budget before the first login and\n    # then fired attempts 2 and 3 with no wait left at all.\n    sv=0\n    while [ \"$sv\" -lt 60 ] && [ \"$(s6-svstat -u \"$SVC\" 2>/dev/null)\" != \"true\" ]; do\n      sv=$((sv + 1)); sleep 1\n    done\n    if [ \"$(s6-svstat -u \"$SVC\" 2>/dev/null)\" = \"true\" ]; then\n      log \"qbittorrent-nox was already running - restarting it to load the credential\"\n      s6-svc -r \"$SVC\" || log \"s6-svc -r failed (continuing to verify anyway)\"\n      sleep 3\n    fi\n  else\n    log \"FAILED to write the credential into $CONF (helper exit $rc). The WebUI will keep\" >&2\n    log \"minting a random password\
                 \ every start and BOTH arrs will break. Fix and restart.\" >&2\n    exit 0\n  fi\n\n  # (3) GROUND TRUTH: the WebUI itself must accept it. Wait for the API to answer at ALL\n  #     (shared ~120s budget across attempts), then spend exactly ONE login per attempt -\n  #     at most 3 rejected logins, which stays under qBittorrent's default ban threshold.\n  #\n  # \"THE API NEVER ANSWERED\" IS A DIFFERENT FAULT FROM \"THE PASSWORD WAS REJECTED\", and\n  # conflating them is what made this hook lie once already (see the PORT comment). An\n  # unreachable WebUI is reported as unreachable, and the hook stops rather than spending\n  # its remaining login attempts to produce two more identical wrong diagnoses.\n  api_ok=0\n  while [ \"$waited\" -lt 120 ]; do\n    code=$(curl -s -o /dev/null -m 3 -w '%{http_code}' \"http://127.0.0.1:$PORT/\" 2>/dev/null)\n    if [ -n \"$code\" ] && [ \"$code\" != \"000\" ]; then api_ok=1; break; fi\n    waited=$((waited + 1)); sleep 1\n  done\n  if [ \"$api_ok\" != 1 ]; then\n    log \"the WebUI never answered on 127.0.0.1:$PORT within the wait budget, so the\" >&2\n    log \"credential in $CONF is UNVERIFIED. This is NOT a rejected password - it was\" >&2\n    log \"never submitted. Do not rotate the credential on the strength of this line.\" >&2\n    exit 0\n  fi\n  body=$(curl -sS -m 10 \\\n           --data-urlencode \"username=$QBT_WEBUI_USERNAME\" \\\n           --data-urlencode \"password=$QBT_WEBUI_PASSWORD\" \\\n           \"http://127.0.0.1:$PORT/api/v2/auth/login\" 2>/dev/null)\n  if [ \"$body\" = \"Ok.\" ]; then\n    log \"VERIFIED: the WebUI accepts the durable credential for '$QBT_WEBUI_USERNAME'\"\n    exit 0\n  fi\n  log \"WebUI rejected the durable credential (login said '$body')\" >&2\n  # A rejection when the conf was ALREADY converged (rc=0, nothing written) can only mean\n  # the running qbittorrent-nox is serving something it read from an EARLIER conf, so\n  # rewriting the same bytes on the next attempt would change nothing. The remedy is to\n  # make the process RE-READ the file, so restart the supervised service and let the next\n  # attempt re-verify. Without this the retry loop could never change its own outcome.\n  if [ \"$(s6-svstat -u \"$SVC\" 2>/dev/null)\" = \"true\" ]; then\n    log \"restarting qbittorrent-nox so it re-reads $CONF, then re-verifying\" >&2\n    s6-svc -r \"$SVC\" || log \"s6-svc -r failed (continuing to verify anyway)\" >&2\n    sleep 3\n  fi\ndone\n\nlog \"GAVE UP after $attempt attempts: the WebUI does not accept the credential from git.\" >&2\n# A postStart hook MUST exit 0 - a non-zero exit makes the kubelet KILL the container\n# (FailedPostStartHook -> CrashLoopBackOff), turning a credential fault into an outage.\n# Both failure paths above therefore log LOUDLY and exit 0; the `up` SLI still watches the\n# app, and the arrs' own download-client health check surfaces a broken credential.\nexit 0\n"
       - name: oauth2-proxy
-        image: quay.io/oauth2-proxy/oauth2-proxy:v7.8.1
+        image: quay.io/oauth2-proxy/oauth2-proxy:v7.15.6
         imagePullPolicy: IfNotPresent
         args:
         - --http-address=0.0.0.0:4180

apps/wave-1/radarr.yaml

@@ -138,7 +138,7 @@ spec:
         - name: media
           mountPath: /media
       - name: oauth2-proxy
-        image: quay.io/oauth2-proxy/oauth2-proxy:v7.8.1
+        image: quay.io/oauth2-proxy/oauth2-proxy:v7.15.6
         imagePullPolicy: IfNotPresent
         args:
         - --http-address=0.0.0.0:4180

apps/wave-1/sonarr.yaml

@@ -138,7 +138,7 @@ spec:
         - name: media
           mountPath: /media
       - name: oauth2-proxy
-        image: quay.io/oauth2-proxy/oauth2-proxy:v7.8.1
+        image: quay.io/oauth2-proxy/oauth2-proxy:v7.15.6
         imagePullPolicy: IfNotPresent
         args:
         - --http-address=0.0.0.0:4180

catalog/render.py

@@ -129,7 +129,7 @@ AUTH_MODES = ("oidc", "forward-auth", "native", "none")
 # the sidecar authenticates the browser against Keycloak (homelab realm, the app's auth.groups)
 # and only THEN proxies to the co-located app UI at http://127.0.0.1:<uiport>. The gate is IN
 # the data path (fail-closed: no valid session in an authorized group => no upstream; R-IDP-02).
-OAUTH2_PROXY_IMAGE = "quay.io/oauth2-proxy/oauth2-proxy:v7.8.1"
+OAUTH2_PROXY_IMAGE = "quay.io/oauth2-proxy/oauth2-proxy:v7.15.6"
 OAUTH2_PROXY_PORT = 4180
 KEYCLOAK_ISSUER = f"https://keycloak.{ZONE}/realms/homelab"
 

platform/crafty/deployment.yaml

@@ -130,7 +130,7 @@ spec:
         - name: oauth2-proxy
           # quay.io/oauth2-proxy/oauth2-proxy — same authenticator family as platform/oauth2-proxy, but
           # here in per-app REVERSE-PROXY mode (--upstream is the co-located Crafty UI, not static://202).
-          image: quay.io/oauth2-proxy/oauth2-proxy:v7.8.1
+          image: quay.io/oauth2-proxy/oauth2-proxy:v7.15.6
           imagePullPolicy: IfNotPresent
           args:
             - --http-address=0.0.0.0:4180