38e4bf1459ca4998c1328d74bd1adbc2f4f93387
17
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  jakman85andClaude Opus 5
|
daac05e7e8 |
feat(bulk): prod mounts the NFS export through pfSense's WAN address
The operator added the pfSense port-forward, so BULK_NFS_SERVER is no longer a placeholder. Prod gets 192.168.2.102 (pfSense WAN, DNAT tcp/2049 -> 192.168.1.9); dev stays on the base 192.168.1.9 because it is already on pfSense's LAN. This value could not be left as a placeholder safely: spec.nfs.server is unvalidated by Kubernetes, so the PV would be created, the PVC would BIND, and the failure would only surface as four pods stuck in ContainerCreating. Verified from k3s-prod-1 before committing, deliberately as uid 1000 rather than root (the export carries no_root_squash, so a root write proves nothing, and LSIO images default to PUID 911 which would go Ready and then fail every import EACCES): mount negotiated nfs4 vers=4.1 proto=tcp, write succeeded, and ln() across downloads/ -> tv/ gave link count 2 — real hardlinks, so no silent copy-then-delete. The Nextcloud export was additionally tightened to server-side ro= for prod's three nodes; a write as root is refused. Its content is config/, config_old/ and config_backup/ with no data/ directory, so it is an archive, not a live data store. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
2590bc4317 |
feat(env): BULK_NFS_SERVER — the one knob prod cannot answer yet, and why it is a placeholder
The bulk tier's PersistentVolumes need a server address, and there is no single correct one: the
two clusters sit on OPPOSITE SIDES of pfSense from the storage host, which has exactly one
interface (vmbr0 192.168.1.9/24, on pfSense's LAN).
dev 192.168.1.40/.41/.42 — the SAME segment. Reaches it directly, and already holds one NFS
export from it (/mnt/Storage/k8s-volumes, in the host's /etc/exports). Proven path, so
base's default is the dev value per this file's existing convention, and dev restates it.
prod 192.168.2.10/.11/.12 — pfSense's WAN. tcp/2049 does not traverse that today; 22 and 8006
answer only because pfSense port-forwards them via 192.168.2.102. Opening the storage path
is a PENDING operator decision whose two candidate outcomes give DIFFERENT values here:
192.168.2.102 (another port-forward) or 192.168.1.9 (a route). So prod holds
TBD-PROD-BULK-NFS-SERVER, this repo's established loud-placeholder convention.
Two findings recorded in the prod overlay because they change what the operator has to do:
* THE EXPORT'S CLIENT LIST IS THE SAME UNDER BOTH OUTCOMES. Measured today from this
workstation (192.168.2.132) through the existing port-forward: the storage host logged the
connection as coming from 192.168.2.132 — a WAN-side address — not from a pfSense LAN address
(`ss -tn` peer 192.168.2.132; the host's only route off-LAN is its default via 192.168.1.1).
pfSense DNATs WITHOUT source NAT, so the NFS server sees prod's REAL node addresses either
way. The `zfs set sharenfs=` work therefore does not have to wait for the routing decision.
* ONE PORT, NOT FOUR. The PVs mount nfsvers=4.1, and NFSv4 carries mount and lock in-protocol —
no rpcbind/111, mountd or statd. Whichever outcome is chosen, it opens tcp/2049 and nothing
else. NFSv3 would have needed four ports, three of them on ephemeral numbers.
*** AND ONE HONEST WEAKNESS, stated in the overlay where an operator will hit it. ***
Unlike the LAN knobs above it, this placeholder does NOT fail at apply time. A PV's
spec.nfs.server is an unvalidated string: the API server accepts it, the PV is created, and the
PVC BINDS (binding is pure control-plane). The failure appears only when a pod mounts —
MountVolume.SetUp "Failed to resolve server TBD-PROD-BULK-NFS-SERVER" — so plex, sonarr, radarr
and nextcloud would sit in ContainerCreating on prod. There is no CRD validation to lean on here,
so the guard has to be procedural: set the value before prod reconciles a revision carrying the
bulk volumes. Dev renders a working value and is where these manifests are meant to be proven.
Related finding, NOT fixed here because the file does not exist on main: the static guard this
convention is supposed to lean on, `bootstrap/standup.sh`'s `s3_is_placeholder` family, is absent
from main (it lives on unmerged prod branches), so
conformance/tests/l0-static/placeholder-guard-coupling exits 3 SKIPPED and nothing in the gate
currently refuses a placeholder-shaped overlay value. When standup.sh lands, its guard needs an
arm for this knob and a consumer that calls it — assertions (2) and (3) of that check then cover
this value automatically, since the detector's SEED vocabulary already matches "TBD".
Evidence: `kubectl kustomize clusters/dev` -> BULK_NFS_SERVER: 192.168.1.9;
`kubectl kustomize clusters/prod` -> BULK_NFS_SERVER: TBD-PROD-BULK-NFS-SERVER. Both exit 0.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
161430d915 |
feat(backup): the overlay picks the credential — BACKUP_CREDENTIALS_SUFFIX
The previous commit created the two halves. This one wires the choice, so dev renders MinIO
credentials and prod renders R2 credentials from the SAME base manifests (R-ENV-02: the
overlay patch is the entire difference between environments; no base manifest is forked).
cluster-vars BACKUP_CREDENTIALS_SUFFIX base "" | dev "" | prod "-prod"
velero HelmRelease credentials.existingSecret: velero-cloud-credentials${BACKUP_CREDENTIALS_SUFFIX}
3x CNPG Cluster s3Credentials.*.name: <db>-backup-credentials${BACKUP_CREDENTIALS_SUFFIX}
ONE SUFFIX, NOT FOUR SECRET-NAME KNOBS. Four independent knobs can be updated three-quarters
of the way, leaving one consumer reading the OTHER environment's key with nothing rendering
wrong — and StrictPostBuildSubstitutions cannot catch that: strict mode fails on an UNDEFINED
variable, never on a defined-but-stale one. With one suffix the four move together or not at
all. The cost is that the rendered Secret name is not greppable from the consumer, so both
kustomizations spell the two names out in full beside the resources.
THE BASE DEFAULT IS "" AND THAT IS LOAD-BEARING. It renders the UNSUFFIXED names — objects
that exist in every render, and that dev is running today. The alternative failure mode is
strictly worse than the shared-Secret state this replaces: velero's pod hangs in
ContainerCreating forever when `existingSecret` names a missing Secret (the volume never
mounts), and a CNPG Cluster whose s3Credentials Secret is absent stops archiving WAL — which
under archive_mode=on is a filling pgdata PVC, not a missing backup. So an unresolvable
default breaks the referencing cluster HARDER than a wrong key does. Both overlays state the
value explicitly anyway, so neither inherits it silently.
Prod's overlay change is a cluster-vars op only. The velero Flux Kustomization patch is
untouched (it stays decryption-only, and velero stays suspended on prod).
VERIFIED — `kubectl kustomize --load-restrictor LoadRestrictionsNone` on clusters/dev and
clusters/prod for the cluster-vars values, then on each of the four affected tiers (platform,
platform-config, platform/velero, apps/wave-0) piped through `flux envsubst --strict` with
that environment's variables:
strict envsubst PASSES for all 8 (env x tier) combinations
dev velero existingSecret velero-cloud-credentials
dev keycloak/nextcloud/semaphore-db <db>-backup-credentials (both key refs each)
prod velero existingSecret velero-cloud-credentials-prod
prod keycloak/nextcloud/semaphore-db <db>-backup-credentials-prod (both key refs each)
both all EIGHT Secret objects present in the rendered output (dev and prod alike)
no `${...}` survives in any rendered tier except gitea's three DELIBERATE `$${...}` shell
escapes in apps/wave-0, which are pre-existing and unrelated.
Read alongside the endpoints the same overlays already set, the two environments are now
isolated on credential AND target:
dev velero s3://velero (root) + cnpg s3://cnpg @ http://192.168.1.9:9000 region us-east-1
prod velero k3s-prod-backup/velero + barman prefix @ https://<acct>.r2.cloudflarestorage.com region auto
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
0a0527e7db |
feat(backup): prod's off-cluster DR lands on R2 — and stops the WAL clock
Prod has been archiving WAL to `TBD-PROD-S3-BACKUP-ENDPOINT` since bootstrap. Verified live 2026-09-07 on all three CNPG Clusters: ContinuousArchiving=False, "unexpected failure invoking barman-cloud-wal-archive: exit status 4". Because archive_mode is ON, that is not a degraded backup — it is a DISK-FULL CLOCK. Postgres will not recycle a segment it has not archived, so keycloak-db's pgdata PVC is at 579 MiB used / 4360 MiB free and climbing monotonically. When it fills, the primary PANICs and takes SSO down, and with it kubectl OIDC, Grafana, Headlamp, Gitea and forward-auth. Wiring the endpoint is what lets Postgres drain the whole accumulated backlog in one pass. THE KNOB LAYOUT (three new, one repurposed) and why it is shaped this way. The operator created exactly ONE R2 bucket, `k3s-prod-backup`, but the two backup tools want differently-SHAPED values: the Velero chart takes `bucket` and `prefix` as separate fields, while CNPG's barmanObjectStore.destinationPath is one full s3:// URL whose first path segment IS the bucket. So: S3_BACKUP_ENDPOINT dev http://192.168.1.9:9000 prod https://<acct>.r2... S3_BACKUP_REGION dev us-east-1 prod auto VELERO_BACKUP_BUCKET dev velero prod k3s-prod-backup VELERO_BACKUP_PREFIX dev "" prod velero CNPG_BACKUP_PATH dev s3://cnpg prod s3://k3s-prod-backup/barman There is deliberately NO separate `S3_BACKUP_BUCKET`: CNPG's bucket already lives inside CNPG_BACKUP_PATH, and a second knob holding the same bucket name twice is a rotation waiting to drift. Three knobs, each shaped for its own consumer, and no two of them can contradict each other. TENANCY. Inside k3s-prod-backup, velero and barman get disjoint TOP-LEVEL prefixes — s3://k3s-prod-backup/velero/ and s3://k3s-prod-backup/barman/<cluster>/ — with the bucket ROOT left empty so a misrendered prefix lands somewhere obviously wrong instead of silently colliding. This is not tidiness: Velero ADOPTS every backup under its location and TTL-DELETES it on retention, so an overlapping prefix would let it reap WAL segments; and interleaving two Postgres servers' WAL into one prefix corrupts the chain outright. Dev↔prod isolation is doubly independent — different endpoint AND different bucket names — so neither cluster can reach the other's objects even with a mis-substituted prefix. DEV IS UNCHANGED, BYTE-FOR-BYTE, and that is asserted rather than assumed. Base defaults are dev's LIVE values (verified against the running cluster: BSL bucket=velero with NO prefix, region us-east-1; all three CNPG Clusters ContinuousArchiving=True at s3://cnpg on the MinIO), and the dev overlay now restates all five explicitly for the same reason LONGHORN_DATA_PATH is restated — a silent drift in base would ORPHAN the backups dev's PROVEN restore depends on. The empty-prefix case was the one real risk, and it is settled empirically: with prefix "" the chart omits objectStorage.prefix from the rendered BackupStorageLocation ENTIRELY (helm template, chart 12.1.0), so dev's live BSL is unchanged, not merely equivalent. R2's TWO GOTCHAS, both wired up front: - region must be exactly `auto`. head-bucket answers {"BucketRegion":"WNAM"}, which is a PHYSICAL LOCATION HINT, not a signing region. This was hardcoded us-east-1 inside the Velero HelmRelease — correct-by-accident for MinIO, wrong for anything else — so it is a knob now. - checksumAlgorithm: "". velero-plugin-for-aws v1.14.2 bundles an AWS SDK with flexible checksums on by default and sends x-amz-sdk-checksum-algorithm / x-amz-checksum-crc32 on every PUT; R2 rejects those with HTTP 400 InvalidArgument, failing every backup and every kopia blob upload. It must be PRESENT-but-empty (the plugin branches on the key existing), and the chart does emit an empty value — verified by rendering it. Harmless against MinIO, so it is unconditional rather than a fourth knob. WHAT THIS DOES NOT DO. Velero stays SUSPENDED on prod. `spec.suspend: true` is owned by field manager `flux` (verified: kustomize-controller's managedFields do not include f:suspend), so server-side apply will not strip it, and nothing here declares suspension — which would also trip R-ENV-03, since a prod overlay may patch only cluster-vars and a Flux Kustomization's `decryption`. Unsuspending is the operator's, after `standup.sh --s3-endpoint <r2> s3check` proves a round trip. NO DNS KNOB IS TOUCHED. BASE_DOMAIN stays prod.home.keithjackson.dev and every EXTERNALDNS_* value is untouched. The apex inversion on work/prod-standup-campaign was deliberately NOT carried: this branch ports that branch's R2 reasoning knob by knob, and merges nothing. VERIFIED: ci/l0.sh green (flux-postbuild-substitution 272 assertions, 0 hazards, 33 knobs defined / 28 referenced, every new token resolved in BOTH overlays); render-golden, lint, schema, spec-immutability green; touched requirement R-STATE-03 covered. Refs R-STATE-03, R-IDP-05, R-ENV-02, R-ENV-03. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
d1a6628a97 |
feat(ha): the CNI dials the control-plane VIP — kube-vip becomes a CNI prerequisite
OPERATOR DECISION 2026-09-06: "use the VIP as intended — a virtual address to reach
the cluster and provide fault tolerant HA. Without a change it will not work in HA."
THE DEFECT. Cilium's kube-proxy replacement dialled a SINGLE NODE. Re-confirmed live
before changing anything: all three prod cilium-agent pods carried
KUBERNETES_SERVICE_HOST=192.168.2.10 — k3s-prod-1's own address — while the kube-vip
VIP 192.168.2.9 was Running on all three nodes with a held lease. Lose prod-1 and the
CNI's control-plane path is dead on an "HA" cluster. clusters/prod's own comment said
the value must be the VIP and NOT .10, then called it "Not yet decided" — I treated
that stale comment as an open question when the evidence already settled it.
SPLIT, NOT REPOINT, because k3s_api_host had two consumers with opposite needs:
k3s_api_host unchanged — the FOUNDER's IP: the cold-bootstrap join
target and a tls-san. infra/tofu/outputs.tf GENERATES this
name, so renaming would ripple into tofu and the runbooks.
k3s_apiserver_endpoint NEW = {{ kube_vip_address }} — the HA address; what Cilium
consumes. Derived, not restated, so an environment overrides
ONE line and the VIP, the SAN and the CNI endpoint move
together. Prod needed no new override.
THE SECOND HAZARD, WHICH MY BRIEF DID NOT NAME and the agent found: pointing Cilium at
the VIP breaks a COLD bootstrap for the same reason the join would — site.yml ran
node-baseline -> k3s -> cilium, so Cilium would install against an address nothing
announced yet. That is the 2026-09-01 deadlock shape. Fixed by SEQUENCE, not value:
site.yml now imports kube-vip.yml BETWEEN k3s and cilium. It cannot go earlier
(kube-vip is a k3s auto-deploy manifest, so it needs a cluster) and it works there
because the DaemonSet is hostNetwork with KUBERNETES_SERVICE_HOST=127.0.0.1 — needing
neither CNI nor kube-proxy. roles/kube_vip gained a read-only `wait_for` on the VIP so
a cold run stops THERE with a named cause instead of surfacing as unreachable agents.
Also fixed a pre-existing bug that only mattered once this play joined site.yml: the
role's read-only interface probe ran without `check_mode: false`, so under --check it
was skipped and the assert fired with a misleading "set kube_vip_interface explicitly".
VERIFIED BY ME, not just reported:
renders dev K3S_API_HOST=192.168.1.49 prod=192.168.2.9 (each environment's VIP)
cilium template consumes k3s_apiserver_endpoint, not k3s_api_host
cold join still `--server https://{{ k3s_api_host }}:6443` — the founder
order site.yml: node-baseline -> k3s -> kube-vip -> cilium -> verify -> flux
gate full CI gate PASS
Agent-side, additionally: in-memory render of cilium-values.yaml.j2 per host showing
k8sServiceHost=the VIP with the join still on the founder; k3s_tls_sans renders
['.10','.9','127.0.0.1','.11','.12'] so NO cert reissue and NO k3s restart is involved
— .9 already answers under full CA verification; and --check --diff of kube-vip.yml
against prod reported 6 ok / 0 changed, i.e. the role edits change nothing about the
kube-vip prod already runs.
ha-control-plane-as-code 92 -> 112 assertions, turning two escalations into machine
checks: the Cilium template must use the endpoint var; the endpoint must derive from
kube_vip_address and k3s_api_host must not; per environment K3S_API_HOST must equal
that environment's VIP and be none of its node IPs (the [parity] contract, now
machine-checked rather than a comment); site.yml must order k3s -> kube-vip -> cilium.
Every new assertion mutation-tested and bites. One honest negative recorded: reverting
only the BASE default is not caught, because both overlays patch the key — the check
reads effective per-environment values, so the base default is unguarded.
APPLY ORDER, and this is the operator's step — nothing was applied:
PROD FIRST, and it is the low-risk direction (prod is the broken one). Push and let
Flux reconcile platform/cilium: the value change rolls the cilium-agent DaemonSet
ONE NODE AT A TIME (maxUnavailable: 1 — the knob that bounded the 2026-09-01
incident), it will not proceed past an unready pod, existing datapath survives an
agent restart, and .9 is already live before the change lands.
DEV SEPARATELY, operator present. Same mechanics but live dev agents dial
192.168.1.50, and dev is mid-DNS-migration on dev-live. Do not fold it into that.
ANSIBLE: nothing to run for either live cluster; the Ansible half matters only for a
cold build. Remove the now-redundant standalone kube-vip.yml step from any runbook.
NEW NAMED GAP, unwritten: the L2 test cannot assert the running agents' live
KUBERNETES_SERVICE_HOST, which is the drift the L0 check cannot see. Recorded in that
test's gap list.
Refs R-PLAT-01, R-NET-01, R-ENV-02.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
2d7d302c7e |
feat(prod): cut prod's GitOps source over to prod's OWN in-cluster Gitea
Prod reconciled from http://192.168.2.132:3000 — a podman container on the operator's WORKSTATION, holding a DHCP lease on WIFI. Production's source of truth was a laptop: a lease change or a closed lid stalls all reconciliation. Dev was pointed there too (deliberately, to break a strand risk during its DNS migration), so BOTH clusters depended on it simultaneously. Prod now reconciles from https://gitea.prod.home.keithjackson.dev/... — the Gitea prod itself runs, which apps-wave-0 has been serving for 28h. THE SELF-REFERENCE IS THE WHOLE DIFFICULTY, and it is why this is a commit rather than a kubectl patch. The root Kustomization renders ./clusters/prod, which CONTAINS the patch that sets GitRepository.spec.url — so a live patch is reverted on the next reconcile unless the AUTHORED value moves with it. Dev hit the identical trap on 2026-09-05. The ordered cutover: 1. push the repo to prod's Gitea (18 branches, refs verified identical, 499 commits of history — a real move, not a shallow copy); 2. fast-forward prod Gitea's `main` to |
||
|
jakman85andClaude Opus 5
|
c8c1d2935d |
feat(dns): per-environment BASE_DOMAIN — prod moves to its own subdomain
INCIDENT FIX. Prod's external-dns DELETED EVERY ONE OF DEV'S PUBLIC DNS RECORDS. Both
clusters ran policy: sync against the SAME Cloudflare zone with the SAME implicit
txtOwnerId (`default`), so prod believed it owned dev's records, found no matching sources,
and removed them plus their TXT registry entries. Dev recovered ~30s after prod was scaled
to 0; verified restored against Cloudflare directly (my first check went through a pfSense
override and falsely showed healthy — local resolvers are not evidence about public DNS).
THE MISS WAS MINE, and it was a failure of imagination in how I briefed every agent. I put
"never touch dev" in brief after brief and enforced it — separate kubeconfigs, verified
--limit, sha-checked dev's kubeconfig before and after. Every one of those guards held. NONE
of them covered SHARED EXTERNAL RESOURCES. Prod reconciling its OWN correctly-authored
manifests reached across a third party and destroyed dev's state. Cluster-to-cluster
isolation was verified; the dependency that mattered was cluster-to-Cloudflare.
Operator's architecture: dev -> *.dev.home.keithjackson.dev, prod ->
*.prod.home.keithjackson.dev, apex CNAME <svc>.home -> <svc>.prod.home.
PHASE 1 ONLY (this commit): prod moves to its own subdomain. DEV IS NOT MIGRATED and its
effective hostname stays home.keithjackson.dev, so dev renders byte-identically and nothing
live moves. That alone ends the collision and unblocks prod. Phase 2 (dev -> dev.home. +
apex CNAMEs) is deferred to when the operator is present: it relocates Keycloak's issuer and
12 clients' redirect URIs, forces a rolling k3s restart and kubectl SSO re-issue for every
user, and moves gitea.home. — which is BOTH the GitOps source and the current push target.
BASE_DOMAIN WAS A DEAD KNOB — it existed in cluster-vars but the status report flagged it as
referenced by nothing, because hostnames were hardcoded throughout. Now real: 141 refs.
Searched the AUTHORITATIVE reconciled set by resolving each Flux spec.path transitively via
conformance/lib/status.py — the same resolver the L0 gate uses, so "what Flux reconciles"
has one definition. 185 occurrences across 47 files in 154 reconciled files. Tokenized:
Gateway listeners, the wildcard Certificate, coredns-custom, external-dns, Keycloak
instance/realm (26 redirect URIs), oauth2-proxy, Grafana OIDC, all HTTPRoutes, Homepage's 15
links, 30 runbook_urls, unifi cloud-init, render.py's ZONE constant (which drove
--oidc-issuer-url/--cookie-domain/--whitelist-domain on every forward-auth sidecar) and 11
catalog/ ServiceDefinitions re-rendered canonically. Left alone: 43 comment/prose
occurrences and non-reconciled paths.
TWO THAT CANNOT BE TOKENIZED, flagged not forced:
- headlamp's OIDC URLs live inside a SOPS-encrypted Secret; re-encrypting rewrites the MAC
over every value and the OFFLINE harness cannot verify it (kustomize does not decrypt),
so an error would break live-dev SSO with no pre-flight proof. Prod needs its own copy
anyway — client secrets are realm-scoped.
- kube-apiserver --oidc-issuer-url is a k3s SERVER FLAG, not a manifest, so Flux can never
reach it. Done on the inventory seam instead (k3s_base_domain -> k3s_oidc_issuer_url,
overridden in group_vars/k3s_prod). Verified per host: dev keeps the default, prod gets
prod.home.
EXTERNAL-DNS OWNER, the actual incident cause: txtOwnerId is now explicit per environment —
dev renders exactly `default` (the chart default it was already using, so its existing
records stay recognised) and prod gets `prod`. The BASE default is a NON-COLLIDING SENTINEL,
deliberately not `default`, so a future environment that forgets the knob owns nothing and
can delete nothing rather than silently inheriting dev's identity.
I OVERRODE ONE AGENT DECISION against our own prior finding: it narrowed prod's
domainFilters to prod.home.keithjackson.dev as defence in depth. FINDING F-DNS1
(DECISIONS-LOG 2026-08-17) already proved a subdomain filter DROPS THE PARENT ZONE —
ExternalDNS generates the record then skips it with "no hosted zone matching record DNS
Name". Prod would have published NOTHING. Set to the ZONE (keithjackson.dev) like dev.
Isolation comes from the subdomain split plus txtOwnerId, which is what the incident
actually needed and what a domain filter cannot provide.
DEV PROVEN UNCHANGED: 11 of 12 substituting paths byte-identical; the 12th differs by
exactly one line, `+ txtOwnerId: default` — the value dev was already using implicitly.
POSITIVE CONTROLS confirm the harness is not blind: perturbing BASE_DOMAIN moves 10 of 12
hashes (the 2 that don't provably contain no hostname), perturbing the owner id moves
exactly 1. Prod's rendered output has ZERO home.keithjackson.dev references outside prod.,
and its cert renders *.prod.home.keithjackson.dev — no overlap with dev's.
L0 substitution assertions 106 -> 254; BASE_DOMAIN is no longer flagged dead. Gate PASS.
PROD REMAINS SUSPENDED (platform + 10 downstream tiers) pending review; nothing applied.
Serves: R-ENV-02, R-DNS-01, R-DNS-02, R-DNS-03, R-TLS-01.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
9b8979a427 |
feat(prod): temp Gitea source + wireless disabled + flux bootstrap path
Autonomous prod bring-up, operator away. Three changes that together clear the last blockers before `flux bootstrap`. === 1. TEMPORARY BOOTSTRAP GITEA — the last hard blocker, cleared === clusters/prod's source URL could not work: Gitea runs ON the dev cluster (the one slated for decommission) and split-horizon DNS resolves gitea.home.keithjackson.dev to PROD's OWN gateway. Stood up the existing bootstrap/gitea/bootstrap-gitea.sh on the operator's workstation with HOST_NAT_IP=192.168.2.132; all three prod nodes verified reachable (Gitea 1.22.6 via the API), no firewall change needed — prod is on the same /24, no NAT. clusters/prod now points at http://192.168.2.132:3000/... under a boxed TEMPORARY banner with a 5-step cutover checklist ending 'delete this whole block — dev's stanza is what done looks like'. Repo verified PUBLIC with anonymous read two independent ways (API "private":false; git ls-remote unauthenticated with GIT_TERMINAL_PROMPT=0), so NO secretRef is needed — documented so a future auth failure is not misread as a network fault. bootstrap-gitea.sh's header corrected: it documented HOST_NAT_IP=10.73.0.1, the RETIRED libvirt NAT, and forbade agent use; the operator has now directed this for prod. === 2. WIRELESS DISABLED ON PROD (operator-reported) === k3s-prod-3 was on ethernet AND wireless, and the wifi DHCP client was overwriting /etc/resolv.conf. Root cause of the silence: node_baseline's DNS `contended` detection checked resolvconf and NetworkManager but NOT dhcpcd, so the role wrote resolvers, reported success, and dhcpcd reverted them on lease renewal — the exact 'green run that fixed nothing' the contended branch exists to prevent. Now IaC, not a one-off: survey wireless hardware, **REFUSE to disable it if the path to the node runs over the wireless interface** (the guard that meant an agent dying mid-apply cost nothing), blacklist the driver so it never reloads, stop dhcpcd only where it holds a wireless interface and nothing else, take links down and unload modules with NO reboot, then report the resulting state. dhcpcd is now in the contended set without weakening fail-closed. Applied and verified: node 3's wlp1s0 is GONE from /sys/class/net, dhcpcd inactive and its unit not-found, ONE default route per node, all three on 8.8.8.8/1.1.1.1 resolving public names. Safe and idempotent on nodes 1 and 2, whose wifi hardware was already down. === 3. flux_bootstrap PATH PARAMETERISED === bootstrap/flux/bootstrap.sh already read FLUX_ENV_PATH but the role never exported it, so it ALWAYS bootstrapped clusters/dev — prod was impossible. Two behaviour-bearing lines: role default clusters/dev + `environment: FLUX_ENV_PATH`, overridden to clusters/prod in group_vars/k3s_prod. Proven per host with a read-only Ansible probe: prod hosts resolve clusters/prod, localhost/hypervisor resolves clusters/dev. Only two definitions repo-wide. DEV PROVEN BYTE-IDENTICAL for the source change: all 12 substituting Flux paths rendered for both trees, 27/27 SHA-256 artefacts identical, with TWO POSITIVE CONTROLS (an overlay-level canary and a deep-path content canary) confirming the harness detects change — and both canaries proven restored. Honest scope note recorded: kustomize strips comments, so the harness proves the built stream, not source comments. L0 substitution check: 106 assertions, 0 hazards. ci/l0.sh and ci/lint.sh exit 0. === STILL BLOCKING A FULL PROD RECONCILE (operator decisions) === - S3_BACKUP_ENDPOINT remains TBD-PROD-*: prod CANNOT reach dev's versitygw at 192.168.1.9:9000 (verified UNREACHABLE from all three — the pfSense boundary), and a prod backup target is a deferred operator decision. Deliberately NOT invented: a DR target on a workstation container would create false confidence. Velero/CNPG backups will fail loudly. - Prod's public resolvers mean the API server's oidc-issuer-url resolves PUBLICLY, so kubectl SSO will not work on prod until split-horizon is solved for it (§4). - The temp Gitea is a single container on the operator's workstation — a single point of failure for prod reconciliation, acceptable for bring-up only. Serves: R-GITOPS-01, R-DNS-01, R-DNS-03, R-ENV-02, R-ENV-03. Task: T-7.1. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
05baae90ec |
feat(prod): kernel fix + disk layout — prod nodes ready for k3s
Prod is being stood up now, without waiting for node 2's RAM upgrade. Three coupled
changes, all applied and verified on all three nodes.
=== 1. KERNEL >= 6.13 — now a PREREQUISITE, not a nice-to-have ===
A k3s SERVER that intermittently boots with 2.6 GiB is not a degraded node; it fails under
etcd plus its workload share, unpredictably, on any reboot. Fixed before k3s goes on.
roles/node_baseline gains a `kernel`-tagged block: asserts the suite matches the node's
Debian release, writes a deb822 trixie-backports source, installs, reads back the exact
version, writes a provenance/rollback note to the node. Scoped by
node_baseline_backports_kernel (default FALSE, true only in group_vars/k3s_prod) — chosen
over a hostname test so a fourth prod node inherits it from group membership. Verified:
--check against dev skips all 8 tasks on all 3 hosts. Two deliberate calls: `state: latest`
not `present` (linux-image-amd64 was already installed from main, so `present` would have
silently fixed nothing), and NO preferences.d pin (backports' NotAutomatic +
ButAutomaticUpgrades already gives 100/500; an explicit Pin-Priority: 100 would switch OFF
automatic security upgrades for the very kernel being installed).
Installed 7.1.8+deb13-amd64 on all three; 6.12.107 kept bootable.
THE DECISIVE PROOF: node 2 booted at MEMATTR=0xbeeb0018 — the EXACT address that gave it
2.6 GiB twice — and now reserves 634,904K instead of 13,958,980K. MemTotal 15.4 GiB. Same
address, handled correctly; not a lucky draw.
§0b's claim that a fixed kernel prints 'FW_BUG Corrupted...' is CONDITIONAL and was
corrected: >=6.13 has three rejection gates and only the third prints that line; all three
nodes hit gate 1 (version > 2). Proof instead is boot-independent — decompressing
/boot/vmlinuz on all three yields the FW_BUG and descriptor-size strings verbatim; neither
exists in 6.12.
TWO MORE BUGS IN MY OWN HEALTH CHECK, found because the fix couldn't otherwise be shown:
- MEMATTR_VERSION_RE matched (\d+) but the kernel prints that field with %d — SIGNED. Node
2's real value was -1569980416, which did not match, so state fell through to `clean` and
the node reported PASS "the kernel accepted it without complaint". A FALSE PASS on the
exact bug the check exists to find. Now (-?\d+).
- bad_version was WARN unconditionally, so a FIXED node would have stayed WARN forever.
Now keys on memattr_kernel_fixed: same line, WARN below 6.13, PASS at/above.
=== 2. DISK LAYOUT — Longhorn claimed, per-node paths DISCOVERED not hardcoded ===
Operator decision: reuse the ~424 GB partition; accept the shared-device I/O risk (dev's
etcd/Longhorn contention was on a spinning HDD, prod is SSD/NVMe).
Device paths differ per node (sda5 / nvme0n1p5 / sda5), so the role DISCOVERS the partition
via `findmnt --mountpoint` on a declared claim mountpoint rather than trusting inventory.
Per-host host_vars would have frozen today's hardware into inventory, where it goes stale on
the first re-image and the stale value's failure mode is mkfs on the WRONG partition.
Eleven fail-closed asserts before any write: real block device, not backing / /boot /usr
/var /home /tmp or active swap (built from the node's OWN gathered facts, never a hardcoded
list), already ext4, no foreign label, >= 100 GiB, and empty. Relabel, never reformat.
/srv verified empty first on every node (ls -A -> lost+found only; du 20K; the "5.1% used"
was ext4's default 5% root reserve).
=== 3. k3s DATA-DIR MOVED — /var was 11.8 GiB and would have killed etcd ===
Measured on the fully-deployed dev cluster: containerd 21-25 GB/node, /var total 58-70 GB.
Prod's /var is 11.8 GiB and held BOTH etcd and the image store, so prod would have filled
/var during its first image pulls — and a full /var means etcd cannot write its WAL. Cluster
death, not degradation, arriving during bring-up. Invisible when the disk decision was made,
because "etcd on root" sounded like the 30 GiB / rather than a separate 12 GiB /var.
Now: p5 -> /data (LABEL=k3s-data), with /data/longhorn and /data/k3s. Neutral names chosen
deliberately — the partition now has two tenants, and reusing /srv would make "claimed" and
"unclaimed" indistinguishable to the idempotency pivot, while a bare `data` label would make
a stranger's `data` volume look already-claimed and weaken an assert.
The transition off the existing LABEL=longhorn mount is DECLARED, not inferred
(node_baseline_data_retired_fs_label/_retired_mount, defaults ""), because changing the label
makes a claimed node answer "no" to the pivot and walk into the greenfield path. Self-retiring
once blkid -L k3s-data succeeds. THREE independent gates keep live dev out: retired vars
default ""; gated on longhorn_source == claim-mountpoint (dev is `device`); and the emptiness
assert fails closed on dev's 18 volumes even if both were defeated.
k3s_data_dir is one variable read by two roles (k3s_server --data-dir; node_baseline derives
the etcd mount). Role default is k3s's own default, so dev is unchanged and keeps its
dedicated etcd device. node_baseline_etcd_source becomes `shared-data-partition` and is
LOAD-BEARING: the role asserts per run that the filesystem backing the etcd dir really IS the
data partition — had the mount silently failed, etcd plus 21-25 GB of images would land back
on the OS filesystem invisibly until the disk filled.
LONGHORN_DATA_PATH is a new cluster-vars knob (R-ENV-02): base and DEV /var/lib/longhorn,
prod /data/longhorn.
DEV PROVEN UNCHANGED, which is the property that mattered — the live cluster has 18 Longhorn
volumes on that path. All 12 substituting Flux paths rendered through
`kubectl kustomize | flux envsubst --strict` for both trees: 12/12 per-file SHA-256 identical
and an identical aggregate SHA over every rendered dev byte. With a POSITIVE CONTROL showing
the same harness detects prod changing on exactly one line — an all-identical result is
worthless if the harness cannot see change. Live check after: dev's default-data-path setting
still /var/lib/longhorn, 18 volumes attached, 0 Kustomizations unready.
Idempotent: run 2 is changed=0 on all three nodes. Also fixed a real tag bug — include_tasks
does NOT propagate its own tags to included tasks (unlike import_tasks), so `--tags disks`
selected the include and ran nothing inside it while reporting success.
OPEN DEFECTS, tracked not forgotten: node 2's warm-reboot hang (one clean reboot since, NOT a
fix); and node 3 runs dhcpcd for its wifi interface, which rewrites /etc/resolv.conf on lease
renewal — the role's `contended` detection checks resolvconf and NetworkManager only, so node
3's decided resolvers will silently revert.
Gate: MERGE GATE: PASS. L0 substitution check 106 assertions.
Serves: R-ENV-01, R-ENV-02, R-ENV-03, R-STATE-01, R-STATE-02, R-PLAT-01. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
6b4da27f84 |
feat(prod): SOPS decryption (same age key as dev) + GitOps source on main
Operator decisions, 2026-09-01:
1. Prod uses the SAME SOPS age key as dev.
2. Prod tracks the SAME BRANCH as dev (`main`). Dev is a temporary instance and will be
decommissioned once prod is deemed stable.
SOPS: eight `decryption: {provider: sops, secretRef: sops-age}` patches mirroring dev
exactly — platform, apps-wave-0/1/2, oauth2-proxy, headlamp, crafty, velero. The sops-age
Secret is still created OUT OF BAND on prod (bootstrap/sops/install-age-key.sh); the
overlay references it by name only, never inlines key material.
RECORDED CONSEQUENCE of the shared branch: once prod is live, EVERY MERGE TO main
RECONCILES BOTH CLUSTERS. There is no promotion step and no soak window — dev and prod
move together. That is a deliberate consequence of dev being temporary, not an oversight,
but it removes the "prove it on dev first" safety net that the last few days have leaned
on heavily. Worth revisiting if dev outlives its expected life.
*** BOOTSTRAP BLOCKER recorded, NOT papered over *** — the source URL cannot work on a
cold prod cluster, for two independent reasons found while wiring this:
1. SELF-HOSTING CIRCULARITY. Gitea runs ON THE DEV CLUSTER — the one slated for
decommission. Prod syncing from it means prod's source of truth lives inside the
cluster being retired. Gitea must move to prod (or off-cluster) BEFORE dev is torn
down. This makes Gitea migration the FIRST task of the decommission plan, not the last.
2. SPLIT-HORIZON DNS SENDS IT TO THE WRONG PLACE. platform/coredns/coredns-custom.yaml
answers the ENTIRE home.keithjackson.dev zone with ${GATEWAY_VIP} via a template
plugin. On prod that is 192.168.2.20 — PROD's own gateway, where no Gitea listens. Prod
Flux would resolve gitea.home.keithjackson.dev to itself and never reach a repository.
This is the same split-horizon mechanism that makes dev work, inverted against us.
Bring-up therefore needs a TEMPORARY source (the bootstrap host-Gitea, or an off-cluster
mirror) with a cutover to the in-cluster URL once Gitea actually runs on prod — precisely
the sequence docs/05 describes for dev's own Phase-6 cutover. The branch is settled and
correct; only the host is blocked. Documented at the patch site and in
PROD-PROVISIONING.md §7.
Gate: MERGE GATE: PASS.
Serves: R-SEC-01, R-GITOPS-01, R-ENV-02, R-ENV-03. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
666a60776a |
fix(flux): close the substitution race — platform dependsOn root + strict substitution (P0/P1)
P0 — clusters/base/platform.yaml gains `dependsOn: [flux-system]`. This is the actual fix for the incident, not the feature gate. Verified against kustomize-controller v1.4.0 `kustomization_controller.go :: checkDependencies` (our version): dependsOn is REVISION- gated, not merely Ready-gated — when the dependency shares a GitRepository, the dependent cannot reconcile revision N until the dependency has APPLIED revision N. Applying revision N is exactly what writes a newly-added cluster-vars knob. Graph verified mechanically, not by eye: built clusters/dev and clusters/prod and walked the resulting objects. `platform` was the ONLY Kustomization without a dependsOn, and all 11 substituting Kustomizations chain transitively through it (platform-config -> platform; the waves, apps-vms, oauth2-proxy, headlamp, homepage, crafty, velero -> platform-config). The "not chaining through platform" set is EMPTY, so this one edge protects the whole graph. DFS over the full edge set after the edit: no cycles. The root (clusters/dev/ sync.yaml) runs wait: false, which is what makes the edge deadlock-free — it reaches Ready on apply success without health-gating its children. Accepted trade-off, documented in-file: the root becomes a gate. A malformed manifest anywhere under clusters/<env> — including clusters/base — now stalls platform and everything downstream, where today it would not. Fail-closed, per doctrine. P1 — StrictPostBuildSubstitutions. MY PREMISE WAS WRONG about where this belongs and it matters: this repo deliberately does NOT use `flux bootstrap` (see bootstrap/flux/README). There is no gotk-components.yaml in git, and the live kustomize-controller Deployment carries NO Flux ownership labels — it was installed imperatively by `flux install` from bootstrap.sh and is not in Flux's inventory. `flux-system` self-manages the CR graph, NOT the controllers. Nothing under clusters/** can reach a controller flag. So it uses Flux's documented mechanism for hand-installed clusters: a new bootstrap/flux/components/kustomization.yaml wrapping `gotk-components.yaml` with a JSON-6902 patch appending --feature-gates=StrictPostBuildSubstitutions=true to kustomize-controller. JSON-6902 `add /args/-` deliberately, NOT strategic merge — a container's args is atomic and a merge patch would replace all five install-generated args. bootstrap.sh step 1 now renders (`flux install --export` into a temp dir, apply the patch, ASSERT the gate string is present so a future Flux bump that breaks the patch target fails loudly) then applies. FLUX_INSTALL_PLAIN=1 is a loud escape hatch. Nothing is vendored, so components can never drift from the pinned FLUX_VERSION. Rejected: vendoring gotk-components.yaml under the root's path (the root's prune: true would put Flux's own controllers and CRDs in a prune inventory), and shipping a partial Deployment as a Flux-managed resource (a future prune would delete kustomize-controller). ROLLOUT ORDER MATTERS. P0 arrives automatically on the next reconcile. P1 does NOT arrive on a git push — the controller Deployment is outside Flux's inventory, so an operator must re-run bootstrap.sh step 1, which restarts kustomize-controller (~10-20s; Flux is level-triggered so an interrupted reconcile is simply retried). P0 must be reconciled BEFORE P1 is rolled out: with the gate on but the ordering edge absent, the same race turns a transient empty render into a transient hard Kustomization failure. ALSO FIXES A PHASE-7 BLOCKER THIS CHANGE WOULD OTHERWISE HAVE CREATED. clusters/prod had no root Kustomization — dev/sync.yaml even carried the note "a prod overlay needs its own sync.yaml -> ./clusters/prod". With the new dependsOn, a prod bootstrap would have left platform blocked forever on a flux-system Kustomization that does not exist, and nothing downstream would ever reconcile. clusters/prod/sync.yaml is now authored, mirroring dev. Two further prod-overlay gaps found and DOCUMENTED, not guessed (PROD-PROVISIONING §7): prod has no SOPS `decryption` patch (every encrypted Secret would fail to decrypt — needs the prod age-key decision, a security choice not a copy), and no GitRepository source URL patch (needs a decision on whether prod tracks the same branch as dev, which would make a dev-facing merge reconcile prod). Substitution gate re-run: check OK, 102 assertions, 0 hazards. Gate: MERGE GATE: PASS. Serves: R-ENV-02, R-GITOPS-01, R-PLAT-01, R-ENV-03. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
ff0533106b |
feat(prod): operator decisions — node DNS, service VIPs, become vault, collections path
1. PROD NODE DNS = 8.8.8.8 + 1.1.1.1 (operator, 2026-09-01). Two INDEPENDENT public
upstreams, so the single-upstream SPOF that broke containerd pulls and CoreDNS
forwarding on dev cannot recur. Prod deliberately differs from dev, which is
PiHole-first because dev needs the local jackson.lan zone.
SCOPE CORRECTED IN THE COMMENTS. Three resolvers answer *.home.keithjackson.dev and
only one is configured here:
pods -> CoreDNS -> platform/coredns/coredns-custom.yaml, whose `template` plugin
answers the WHOLE zone with ${GATEWAY_VIP}. Self-contained in-cluster;
PiHole is NOT in this path. Prod is already correct (.20).
LAN -> PiHole. Not a cluster concern.
nodes -> THIS FILE.
The one thing public node DNS breaks: the k3s API SERVER is a node process carrying
oidc-issuer-url=https://keycloak.home.keithjackson.dev/realms/homelab and reaches the
issuer through the NODE resolver, so prod would get the PUBLIC record instead of the
prod Gateway VIP — breaking kubectl OIDC SSO. Dev avoids this only because its node
resolver IS PiHole. Not blocking (prod has no cluster or Keycloak yet); options are
recorded in PROD-PROVISIONING.md §4 for the operator to pick.
2. SERVICE VIPs DECIDED: UNIFI_L4_VIP 192.168.2.21, CRAFTY_L4_VIP 192.168.2.22 — the
first two addresses after GATEWAY_VIP (.20), mirroring dev's .53/.54/.55 ordering
within the .20-.30 pool. S3_BACKUP_ENDPOINT stays TBD-PROD-* : no prod backup target
exists, and dev's versitygw is across the pfSense boundary on the dev host, so it is
not DR for prod.
3. PROD BECOME VAULT committed, ansible-vault encrypted, matching the hypervisor and
proxmox_hosts pattern. Verified working: `ansible k3s_prod -m command -a 'id -un'
--become` returns root. The L0 no-plaintext-secrets check asserts every ansible
vault.yml starts with $ANSIBLE_VAULT, so this stays honest by gate.
4. TOOLCHAIN GAP FIXED: the devcontainer image does NOT ship the Galaxy collections, so
EVERY ansible play died at parse time on community.general.modprobe. ansible.cfg now
sets collections_path = collections, and the collections are installed there from the
existing collections/requirements.yml (gitignored — pinned by requirements, fetched at
setup, vendored bytes are not source).
5. DRIVE HEALTH MEASURED and recorded in §2 with the raw attribute table so the numbers
are auditable. Verdict: usable, but not for production etcd/Longhorn state — 31% of
rated life consumed, 15 grown bad blocks, 187 erase failures, and 32 unexpected power
losses on a consumer drive with NO power-loss protection, in a single failure domain.
etcd is the worst possible tenant: it fsyncs constantly and unclean power loss without
PLP is exactly how a member corrupts.
6. NON-ECC RAM: RISK ACCEPTED by the operator, recorded as a CLOSED decision, not an open
item — do not re-litigate. Rationale: 3-node k3s homelab, not enterprise; corruption on
one node is outweighed by the other two and causes node ejection. That holds for the
dominant mode (etcd raft CRC + quorum; Longhorn 3 replicas + hard anti-affinity +
rebuild). Recorded residual: corruption introduced UPSTREAM of replication replicates
faithfully to all three replicas, so quorum sees no disagreement — low probability, and
the only mitigation is different hardware. Follow-up noted: Longhorn's
snapshotDataIntegrity is left at the chart default rather than set explicitly, and it
is the mechanism that operationalises the operator's own argument.
Serves: R-DNS-01, R-DNS-03, R-ENV-02, R-ENV-03, R-SEC-01. Task: T-7.1.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
3f980d2a17 |
feat(env): tokenize hardcoded dev LAN addresses into cluster-vars (R-ENV-02)
R-ENV-02 promises dev and prod differ ONLY by scoped cluster-vars overrides. In fact
dev LAN addresses were hardcoded into base manifests, so clusters/prod would have come
up ANNOUNCING DEV ADDRESSES (192.168.1.x) on the prod LAN (192.168.2.x).
New cluster-vars knobs (base default = dev literal, per the file's existing convention):
K3S_API_HOST platform/cilium/helmrelease.yaml (+ the values.yaml mirror)
CILIUM_LB_POOL_START platform-config/cilium/l2-ip-pool.yaml
CILIUM_LB_POOL_STOP "
UNIFI_L4_VIP apps/vms/unifi/50-service-l4.yaml
CRAFTY_L4_VIP platform/crafty/service-l4.yaml
S3_BACKUP_ENDPOINT platform/keycloak/postgres-cluster.yaml, apps/wave-0/{nextcloud,
semaphore}-db.yaml, and platform/velero/helmrelease.yaml
Also fixes GATEWAY_VIP's base default, which was still the RETIRED libvirt address
10.73.0.240, and adds the GATEWAY_VIP patch that clusters/prod was missing entirely.
clusters/base/apps-vms.yaml gains postBuild.substituteFrom (it was the one consuming
Kustomization without it, so a ${TOKEN} there would have shipped as a literal string).
The envsubst contract is documented there: ${VAR} substitutes and escapes as $${VAR};
$VAR and $(cmd) are left alone; ${ARR[0]} hard-errors. The three UOS_URL expansions in
the unifi cloud-init are escaped accordingly.
PROD ADDRESS PLAN (operator, 2026-08-31):
nodes .10/.11/.12 · control-plane VIP .9 (Ansible-side) · GATEWAY_VIP .20
Cilium LB pool .20-.30
CONTAINMENT INVARIANT, now documented at the pool and in the prod overlay: GATEWAY_VIP
MUST equal CILIUM_LB_POOL_START. The shared Gateway pins no address, so Cilium LB-IPAM
gives it the first free address of a matching pool block. An initial prod proposal put
.20 outside a .21-.30 pool; the Gateway would have come up on .21 while split-horizon
coredns-custom kept answering *.home.keithjackson.dev with .20 — an address nothing
announces — blackholing in-cluster OIDC hairpin traffic while reporting healthy. The
pool was widened to .20-.30. The control-plane VIP (.9) stays outside the pool so
kube-vip and LB-IPAM can never contend.
Values prod still cannot know stay INVALID `TBD-PROD-*` placeholders on purpose: base
defaults are dev values, so an omitted patch means prod silently inherits a dev address
— far worse than a loud failed apply.
DEV IS BYTE-IDENTICAL. Verified by kustomize build over 13 paths before/after, then
flux envsubst with the dev cluster-vars values applied to both sides: zero drift. The
only deltas are the intended additive keys in the overlay ConfigMap itself. No
unresolved ${TOKEN} survives. render-golden green (10 goldens); yamllint clean.
Serves: R-ENV-02. Task: T-7.1 (prerequisite). Gate: MERGE GATE: PASS.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 4.8
|
eb31d2ef58 |
fix(monitoring): cap Prometheus TSDB by size to stop false absent()/==0 alerts
The 7 falsely-firing platform alerts (KeycloakDown, KeycloakDatabaseDown,
KubeAPIDown, KubeletDown, VPNTunnelDown, KubeVirtControlPlaneDown,
CDINoDefaultStorageClass) share ONE root cause, not per-rule label mismatches:
the Prometheus PVC is 100% full ("no space left on device" on every WAL commit).
Evidence from the live dev cluster:
- /prometheus is 4.8G/5Gi, 0 bytes free; every scrape logs "Scrape commit
failed ... write to WAL: no space left on device". Scrapes still return 200
(targets show healthy, lastScrape=now) but samples are never stored, so the
TSDB head froze at 2026-08-28 13:45 UTC while the pod clock reads ~19:33 UTC.
- Instant queries at "now" therefore return an EMPTY vector, so every
absent()/==0 platform rule trips. Evaluated at the last-good-sample time each
expr is correctly FALSE (keycloak-0/keycloak-db-1 ready=1, apiserver+kubelet
up=1 x3, tun0 series present, kubevirt control-plane expr empty, CDI default
present) — the rules are correct; the monitor was simply blind.
`retention` alone prunes only by AGE: this cluster is 3d2h old with 3d dev
retention, so time-pruning has NEVER run and 3d of block churn (~1.2Gi/day) plus
a WAL that ballooned past 1Gi overran the 5Gi disk. Fix adds a size-based
retention cap (new MONITORING_PROMETHEUS_RETENTION_SIZE knob) kept below each
env's PVC so Prometheus drops oldest blocks before the disk fills, and bumps the
dev PVC 5Gi->8Gi for real WAL/head/compaction headroom.
- platform/monitoring/kube-prometheus-stack.yaml: retentionSize: ${knob}
- clusters/base/cluster-vars.yaml: knob default 8GiB (base 10Gi PVC)
- clusters/dev/kustomization.yaml: PVC 5Gi->8Gi, retentionSize 5GiB
- clusters/prod/kustomization.yaml: retentionSize 45GiB (50Gi PVC)
- platform/monitoring/README.md: knob table + rationale
Deploy note (PM): the PVC is already 100% full, so Prometheus cannot self-prune
until it can write. The 5Gi->8Gi bump must land as a Longhorn online expansion
(operator PVC expansion / manual patch); once free space returns, retentionSize
keeps it healthy. Watchdog left untouched.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
|
||
|
jakman85andClaude Opus 4.8
|
bba67d03ce |
feat(dns): add GATEWAY_VIP cluster-var for split-horizon target (R-DNS-03)
Parameterize the in-cluster split-horizon target as GATEWAY_VIP (R-ENV-02): base
default = dev L2-announced Gateway VIP (10.73.0.240, first IP of the Cilium LB pool).
coredns-custom answers *.home.keithjackson.dev with ${GATEWAY_VIP} so the unified graph
holds across dev/prod via cluster-vars only. Prod overlay carries a TODO to set the prod
LAN VIP alongside the prod L2 pool range when hardware is built.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
|
||
|
jakman85andClaude Opus 4.8
|
9743b50c3b |
fix(K1): uppercase cluster-vars keys to match component substitution refs
Flux postBuild.substituteFrom is case-sensitive; platform/ components reference
${UPPERCASE} tokens but cluster-vars keys were lowercase -> none would resolve
(literal ${...} would reach the HelmReleases). Uppercased the ConfigMap data
keys + the dev/prod overlay patch paths. Every component ref now resolves;
clusters/dev & clusters/prod build; gate green. Clears the K1 landmine before
any platform un-suspend.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 4.8
|
af4f6c07ae |
T-0.1 Flux GitOps layout + dev/prod overlays + platform component skeletons (R-GITOPS-01/03, R-ENV-02, R-PLAT-01)
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]> |