servicemonitor-ports-resolve could not audit a PodMonitor with no in-repo
Service, and no-plaintext-secrets requires a template's secret value to be a
bare placeholder.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Adds platform/cloudflared: a locally-managed tunnel whose ingress rules live in
git. LAN/VPN-only hosts (plex, plex-vip, jackett, pihole, pihole-dns, semaphore,
qbittorrent, radarr, sonarr, headlamp, unifi, crafty-mc) map to 404. The apex
and *.home go to cilium-gateway-shared.gateway over TLS with matchSNItoHost.
Last comes a catch-all 404. Nothing routes to the Kubernetes API.
- 2-replica Deployment, hard node spread, non-root, pinned digest, PDB
- default-deny plus an egress CNP: Cloudflare edge 7844/443, the Gateway, and
Gateway backends by gateway-access=shared minus the LAN-only namespaces
(needed because of the CVE-2025-30162 L7LB egress re-check)
- PodMonitor plus two alerts that fire on absent series, with promtool tests
- its own Flux Kustomization (dependsOn platform-config, wait:false, nothing
depends on it), plus SOPS decryption patches in both overlays
- placeholder credentials (SOPS-encrypted) so it can merge before enrolment
- L0 cloudflared-ingress-rules, and a cloudflared_ scrape owner
- runbooks/cloudflare-tunnel.md and decisions/2026-11-08-cloudflare-tunnel.md
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The 26.x Keycloak operator creates its own ServiceMonitor named after the
CR (keycloak/keycloak) when metrics are enabled; spec.serviceMonitor.enabled
defaults true. That collides with the Flux-owned platform/keycloak/
servicemonitor.yaml: the operator's PATCH 409s, it exhausts retries, the CR
stays Ready=False/HasErrors=True, and platform-config (wait: true) stalls
every downstream Kustomization.
Keep the repo's ServiceMonitor (conformance L0/L2 and the dashboard are
written against it; the operator's scrapes the same port 9000 /metrics) and
set spec.serviceMonitor.enabled: false.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Run 500 (this PR's first CI run) failed L0 prod-baremetal-not-dev-surface: act runs steps with
umask 0000, the checkout was world-writable, and Ansible (now present, via the toolbox) refuses
a world-writable directory as an ansible.cfg source. Reproduced and fixed locally in the pinned
image.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- conformance/lib/run_l1_offline.py: checks run in a thread pool (--jobs / CONF_OFFLINE_JOBS,
default min(8, usable CPUs)); results consumed in submission order, so log lines, JUnit,
step summary and the 0/1/3 aggregation are unchanged. Exports a smaller MUTATION_JOBS to
the children when parallel, so nested pools do not oversubscribe.
- keycloak-{passkey,client-secret}-reconciler/mutations.py: anchors checked first (serial),
then the --selftest subprocesses run in a pool (MUTATION_JOBS, default min(8, CPUs));
verdicts reported in MUTATIONS order. Output byte-identical to the serial loop.
- ci/lint.sh: yamllint over LINT_JOBS contiguous slices concurrently, per-slice output
buffered and printed in order; stage rc = highest slice rc.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The gate job now runs in gitea.home.keithjackson.dev/home-network/toolbox@sha256:83a3501e...
(the image images.yaml publishes from infra/devcontainer/Containerfile) instead of
catthehacker/ubuntu:act-22.04 plus a per-run download of yamllint, check-jsonschema, kyverno,
promtool and chainsaw. Local (dev.sh) and CI now gate on the identical toolchain.
- actions/checkout (Node) replaced by a plain-git step with fetch-depth-0 semantics; the
toolbox has no Node. The job token is not persisted into .git/config.
- The install step is replaced by a check that every ci/versions.env pin equals the image's
/etc/dev-toolchain-versions, so the pins stay enforced.
- Renovate follows the digest through a `# renovate-digest:` marker; github-actions manager
disabled for own images.
- install-tools.sh kept (merge-gate.yaml blueprint + alert-rules-unit-tested check use it).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The in-cluster runner ran at the default capacity 1 with no config file, so
gate / images / renovate runs on different refs queued behind each other
(29-759s waits; run 472 waited 759s behind a renovate burst).
- ConfigMap act-runner-config with ONLY runner.capacity: 2, selected via
CONFIG_FILE (honoured by the v0.6.1 image's run.sh). v0.6.1 LoadDefault()
applies the same defaults to a partial file as to no file; the
generate-config example is deliberately not used (its labels would override
the registered ones, force_pull differs from the default).
- Pod-template config-revision annotation so ConfigMap-only edits can roll it.
- dind: cpu request 100m -> 2 (no limit), memory 256Mi/2Gi -> 1Gi/4Gi.
Measured at capacity 1: peak 0.69 core, 447Mi working set (30d), 0 OOMs.
- runner: memory 128Mi/512Mi -> 256Mi/1Gi (peak 314Mi at capacity 1).
apps/wave-1/gitea-actions.yaml is a hand-owned EXTRA_UNITS file (the
renderer only places it in a wave), so it is the source, not generated output.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Replace the deprecated top-level `docker` key with the packageRule Renovate's
own migration produced (matchCategories docker, enabled true), keeping every
comment. Supersedes #139, which dropped all comment lines.
- Add gitea/runner (act_runner's upstream rename) to the blast-radius rule.
- rangeStrategy bump for flux/helm `>=A <B` ranges: the default `auto` resolves
to `replace`, which turned `>=1.12.0 <1.13.0` into `<1.14.0` (#131, #130,
#115). In-range `bump` updates are disabled; Flux adopts those unaided.
- Restore headlamp's lower bound: `<0.47.0` -> `>=0.46.0 <0.47.0` (live 0.46.0).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PR #121 bumped the three keycloak-k8s-resources URLs to 26.8.2, but 26.8.2
ships two more CRDs (keycloakoidcclients, keycloaksamlclients). The new
operator fails to start its keycloaksamlclients informer (Not Found) and
CrashLoops, holding Flux `platform` in health checks.
- add both CRD URLs with the same renovate marker/depName
- patch operator memory 450Mi -> limit 768Mi / request 512Mi (26.0.6 was
OOMKilled at 421/450Mi, 154 restarts)
- README/renovate comments: Renovate cannot add CRDs a release introduces
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PR #136 bumps the renderer's OAUTH2_PROXY_IMAGE; the container-workload
and egress-class (vpn + internet) goldens still pinned v7.8.1. Regenerated
with the check scripts' own invocation; each diff is the image tag only.
Also updates the crafty README's current-pin row.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The velero CLI and server are version-coupled, so VELERO_VERSION follows the
server running on prod (docker.io/velero/velero:v1.18.2, chart 12.2.3,
verified 2026-11-07). It has no renovate marker on purpose: bump it together
with the chart's appVersion. The verify stage asserts that
`velero version --client-only` reports the pin. The build arg reaches CI
through build-image.sh --print-build-args, so no .gitea/ or ci/ change is
needed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Gitea dropped the "1." prefix; 28.x is the successor of 1.27.
- image 28.3.0, update.range >=28.0.0 <29.0.0, Renovate ceiling <29.0.0
- drop GITEA__server__DOMAIN (no longer read in 28, ROOT_URL is the source)
- declare RUN_RETENTION_DAYS=400, EGRESS_MODE=lax (no allow list: the OIDC
login source is not gated by the egress policy in 28.3.0), and
DISABLE_REGISTRATION=true (28's new default)
- document autoRollbackOnFailedHealth as inert (no ImagePolicy is rendered);
rollback is a PVC restore because the DB migration is one-way
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add assertion (8) to internal-services-publish-no-public-dns. The external-dns
HelmRelease must declare annotationPrefix explicitly, and every
external-dns annotation in apps/, platform/, runbooks/ and catalog/render.py
must use that prefix. The v0.23.0 default-prefix change on 2026-11-07
ignored the controller: none, target and hostname annotations while
assertions (1)-(3) stayed green.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
external-dns v0.22 changed its default annotation prefix to
external-dns.kubernetes.io/ with no fallback. Renovate #129 moved the chart
to 1.23.0 (app v0.23.0), and at 12:13Z it ignored every alpha-prefixed
annotation in this repo: the Gateway target (public names went to A
192.168.2.20), controller: none (jackett, pihole and semaphore got
published), and the L4 Service hostnames (unifi and crafty-mc were deleted).
Set annotationPrefix: external-dns.alpha.kubernetes.io/ to restore the v0.21
reading. Floor the chart at 1.23.0, because the flag needs app >= 0.22.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
jakman85
renovate-bot