fix(bulk-nfs): repoint at the TrueNAS (192.168.2.30); the PVs must be recreated, not reconciled

Both ZFS pools moved off the Proxmox host onto a standalone TrueNAS on 192.168.2.30 -- prod's OWN /24, so the pfSense crossing that made this knob load-bearing is gone, along with the DNAT at 192.168.2.102 it mounted through. Measured 2026-10-07: 192.168.2.102:2049 no longer answers; .30:2049 and :111 do. BULK_NFS_SERVER -> 192.168.2.30 in prod, base and dev. The dev value is marked inert (dev is decommissioned); it carries the real address only so nothing in the tree renders a host that no longer exists. THE OPERATIONAL POINT, and why this is not just a value change: a bound PersistentVolume's NFS source is immutable. Server dry-run, 2026-10-07: spec.persistentvolumesource: Forbidden: spec.persistentvolumesource is immutable after creation so Flux's apply FAILS rather than updating, and the pods keep their old, dead mount. The five PVs must be deleted and recreated -- safe, because Retain never touches data and render.py emits a pre-set claimRef so each PV rebinds its own PVC. The sequence is docs/BULK-NFS-STORAGE.md section 10 and is an OPERATOR action; this commit does not perform it. Pairs with the hazard already on the page: spec.nfs.server is unvalidated at create (any string binds) and immutable at update. A wrong value is accepted silently and then cannot be corrected in place. docs/BULK-NFS-STORAGE.md: sections 1 and 5 rewritten for TrueNAS -- the measured exports, the service settings that decide whether uid 1000 survives the wire, the three stale ZFS sharenfs properties that had to be cleared, and the ACL hazard (acltype=nfsv4 + aclinherit=passthrough means one click in the ACL editor propagates to the whole future library). Section 7 rewritten now that the placeholder is gone, section 9 retargeted from dev to prod, section 10 new. Sections 2/3/4/6 are unchanged by the move. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Merge pull request 'fix(vpn-ingress): content-hash the peer register, or a merged peer never reaches the tunnel' (#66 ) from fix/peers-configmap-content-hash into main
2026-10-07 01:15:04 -05:00 · 2026-10-06 07:58:49 +00:00 · 2026-10-06 02:55:59 -05:00 · 2026-10-06 07:42:04 +00:00 · 2026-10-06 02:39:23 -05:00 · 2026-10-06 07:31:03 +00:00
46 changed files with 3592 additions and 205 deletions
@@ -37,6 +37,14 @@ coverage/
 infra/tofu/backend.hcl
 infra/tofu/.r2.env

+# Operator scratch, writable from inside the dev container (the repo is its only persistent
+# read-write mount). Holds things that must never be committed: a staged copy of the SOPS age or
+# WireGuard key, rendered VPN client profiles (infra/vpn-ingress/new-peer.sh writes here by
+# default). `infra/ansible/.gitignore` already does this for its own .cache/; this is the same
+# convention at the root. Do NOT rely on `*.key` alone to protect a staged key — that only covers
+# one filename shape, which is why this rule exists.
+.cache/
+
 # Claude Code local scratch: agent worktrees + session state. Nothing here is tracked;
 # ignoring it keeps `git add -A` from staging embedded worktree repos and keeps the lint
 # stage (which scans untracked files) from tripping on .claude/worktrees/.
@@ -4,6 +4,125 @@ Read this before doing anything durable. It is the delivery contract for AI codi
 sessions and agents. The newest entry in `decisions/` is the current PM handoff and
 takes precedence on *what* to work on; this file governs *how* it lands.

+**Start with §0.** It is first because it is the rule you can break before you have read
+anything else: the very first `git checkout -b` in the wrong directory has already done the
+damage.
+
+## 0. Work in your OWN workspace. Never in the shared checkout.
+
+Before you create a branch, edit a file, or run `git` anything: **make yourself a git
+worktree outside the repository root, and do all of your work there.** One workspace per
+agent run, no exceptions.
+
+    # from the shared checkout, ONCE, at the start of your run
+    git fetch origin main
+    git worktree add -b <type>/<slug> /path/outside/the/repo/wt-<slug> origin/main
+    cd /path/outside/the/repo/wt-<slug>        # everything after this happens HERE
+
+`/path/outside/the/repo` means outside this repository's tree — your session scratchpad,
+or a sibling like `/var/home/keith/source/wt-<slug>`. Branch from **`origin/main`**, never
+from `main` and never from `HEAD`; see "stale base" below.
+
+**The shared checkout is `/var/home/keith/source/home-network-k3s-impl`** — the operator's
+working copy, the one you are probably started in. In it, do **not**:
+
+- **`git checkout` / `git switch` / `git checkout -b`.** Its HEAD is shared state; moving
+  it moves the tree out from under whoever else is using it.
+- **edit, create or delete a file.** Including "just one doc", including a file you intend
+  to move later.
+- **`git add` / `git commit` / `git stash` / `git restore`.** `git add -A` there stages
+  whatever another agent left lying around; `git stash` *removes* their uncommitted work
+  into a place they will not look.
+- **`git worktree remove` anything you did not create.**
+
+Read-only commands there are fine, and the one write you do need is creating your own
+worktree.
+
+### Why — measured in the shared checkout, 2026-10-05
+
+| What was measured | Value |
+|---|---|
+| `checkout: moving` entries in its reflog | **107** — the tree has been yanked between branches 107 times |
+| the branch it was sitting on | `feat/pm-agent-issue-to-pr` — **not `main`** |
+| uncommitted trees left in it by other runs | **2** (`infra/agent/`, `platform/pm-agent/`), mtimes five minutes apart the same evening |
+| its local `main` vs `origin/main` | **two commits behind** (`4386d14` vs `22c94ef`) |
+| registered worktrees | **42**, of which **31** are on branches already merged to `main` |
+| gate scripts carrying an explicit `.claude/` exclusion | **9** |
+
+Each row is a distinct way the shared checkout damages work:
+
+- **Dirty tree, foreign files.** Two other runs' uncommitted directories were sitting in
+  it. An agent that edits there and runs `git add -A` ships someone else's half-finished
+  work inside its own PR, and the PR's author has no idea what those files are. This is not
+  hypothetical and it is not historical: **eleven minutes after those two directories were
+  measured, while this very section was being written, another run committed them** —
+  `5334abe feat(pm-agent): ...`, 1,000+ lines across `infra/agent/`, `clusters/`, `catalog/`
+  and `apps/` — onto the shared checkout's checked-out branch, moving its HEAD under anyone
+  reading it. Had this rule's author been working in that tree rather than in a worktree,
+  that commit and this one would have collided.
+- **Stale base.** Its `main` was two commits behind `origin/main`, so
+  `git checkout -b x main` there branches off a tree that is already not what CI will merge
+  into — the gate you run locally proves a base nobody else has. Worse, it was not even *on*
+  `main`: a bare `git checkout -b x` would have branched off `feat/pm-agent-issue-to-pr` and
+  silently inherited that work into your PR. `git fetch` first, and name `origin/main`
+  explicitly as the start point.
+- **Shared HEAD.** 107 branch switches in one tree is 107 chances to switch it while
+  another agent is mid-edit. The loser's changes are either carried onto the wrong branch
+  or lost to a checkout conflict — and the symptom surfaces in *their* session, not yours.
+
+### Put the workspace OUTSIDE the repo root
+
+A worktree *inside* the tree (`.claude/worktrees/agent-*/` — which is where Claude Code's
+own default puts it) is a full second copy of the repo that every tree-walking check then
+finds. Measured 2026-09-12: `find`-based discovery reported **the same manifest under test
+once per worktree, up to 18 times**, and the L0 check comparing that listing against the
+tree failed on paths that are not authored surface at all
+(`platform/monitoring/tests/run.sh:115-123`). Nine gate scripts now carry an explicit
+`.claude/` prune for this reason — which means the hazard is *worked around*, not fixed,
+and the next check that walks the tree will hit it again. Keep the copy out of the tree and
+none of that applies.
+
+### Clean up — and expect not to be able to
+
+31 of the 42 registered worktrees are on branches already merged to `main`. A registered
+worktree **pins its branch**: while it exists, that branch cannot be deleted or checked out
+anywhere else. So a left-behind workspace is a lock on a branch name, and the cost lands on
+whoever next needs it.
+
+Remove yours when you are done:
+
+    git worktree remove /path/outside/the/repo/wt-<slug>
+
+Measured 2026-10-05: on a worktree **you created yourself, in the session scratchpad**, that
+command **succeeds** — rc 0, no prompt, with or without a branch checked out. The "worktree
+removal is sandbox-blocked" note in circulation is about the `.claude/worktrees/agent-*` ones
+belonging to *other* sessions, some of which are additionally `locked` on git's own terms. So:
+remove yours, and only yours. If removal is refused, say so in your handoff and leave the
+worktree registered — do **not** `rm -rf` the directory, which leaves a registered worktree
+pointing at nothing and still holding the branch.
+
+If someone *else's* stale worktree is holding the branch you need, do not try to reclaim the
+branch name. Push a `rework/<pr-number>` branch to the PR's refspec instead.
+
+### If you are already standing in the shared checkout with edits
+
+Stop. Do not `git stash` (that moves other agents' work too). Create your worktree as
+above, redo the edits there, and leave the shared checkout's HEAD and working tree exactly
+as you found them.
+
+### Gating from a worktree
+
+Three known breakages, all with workarounds, all required every run: see §3, "Running the
+gate from a worktree".
+
+### If you are writing a brief for another agent
+
+The brief must name **its own explicit branch** and tell it to create **its own worktree**
+from `origin/main`. "Work on the current branch" and "continue in the checkout" are how
+branch sprawl and cross-contamination got here: an agent given no workspace uses the one it
+is started in, which is the shared one. Also carry §3's three gate workarounds into the
+brief — an agent that cannot gate will report rc 3 as green.
+
 ## 1. Never push to `main`. Ever.

 Every durable change reaches `main` exactly one way:
@@ -147,15 +266,21 @@ Exit codes are a contract — do not flatten them:
 | 3 | UNDETERMINED — a stage did not run. **Never report this as green.** |

 `spec-immutability` reaches rc 3 whenever the sibling spec repo is not checked out
-beside this one; that single skip is expected and tolerated. Any *other* skip is a
-real gap in your run.
+beside this one; that single skip is expected and tolerated — and from a worktree it is
+avoidable outright (§3's worktree list, item 3). `gitea-settings` is the other expected
+skip: it needs `SETTINGS_API_TOKEN`, which exists only in CI, so **a local run cannot
+return 0** — the honest best local result is rc 3 with `gitea-settings` as the only stage
+that did not run. Any *further* skip is a real gap in your run. Report the rc and name the
+skipped stages; never round rc 3 up.

 **Never gate on the host.** `promtool` and `kustomize` are not on the host `$PATH`,
 so checks SKIP and you get a false rc 3. Only the pinned toolbox result counts.

-### Running the gate from a git worktree
+### Running the gate from a worktree

-Two unrelated failures, both with known workarounds — put both in any agent brief:
+This is the **normal** path, not an edge case — §0 requires you to be in a worktree, so
+every gate run you do hits all of these. Three known breakages, all with
+workarounds, all of them yours to apply every run — put them in any agent brief:

 1. **`dev.sh` refuses to start:** `infra/ansible/.cache/prod.kubeconfig` is untracked
   and exists only in the main checkout. Do **not** copy it (it is a credential).
@@ -166,10 +291,17 @@ Two unrelated failures, both with known workarounds — put both in any agent br
   the `ENGINE` hook — a shim that intercepts `run` and re-execs
   `podman run -v /path/to/main/.git:/path/to/main/.git:ro "$@"`. A traceback in
   `tracked_files()` is this bug, not a broken tree.
+3. **`spec-immutability` skips** — the skip called tolerated above is also *avoidable*. `dev.sh`
+   derives the sibling spec path from its own `REPO_ROOT`, which in a worktree is your
+   workspace, so `../home-network-k3s` does not resolve and it adds no mount. Mount the spec
+   repo read-only in the same `ENGINE` shim and pass `-e SPEC_REPO=/home-network-k3s`: with
+   both mounts the stage reports `pass`, not SKIPPED, and R-TEST-06 is actually covered
+   (measured — `decisions/2026-10-01-render-selftest-runs-in-gate.md`).

 ## 4. Branch naming

-Use `feat/`, `fix/`, `docs/`, `chore/`. Note that `.gitea/workflows/gate.yml`'s **push**
+Use `feat/`, `fix/`, `docs/`, `chore/`. **One branch, one workspace, one PR** — if you
+need a second branch, make a second worktree (§0); do not re-point an existing one. Note that `.gitea/workflows/gate.yml`'s **push**
 trigger lists `feature/**` — not `feat/**` — so branch pushes get no fast-feedback run.
 The `pull_request` trigger fires regardless of branch name, so the PR gate is unaffected.

@@ -11,6 +11,9 @@ specification** at [`../home-network-k3s`](../home-network-k3s).
 - **Done = a green, reproducible, requirement-tagged conformance test** — never "merged," never a
  manual demo (spec `docs/14`, `agents/definition-of-done.md`).
 - **No work on `main`.** Every change is a feature branch merged into `main` (spec `CONTRIBUTING.md`).
+- **No work in a shared checkout.** Every agent run gets its own git worktree, outside the repo
+  root, branched from `origin/main`. This checkout is shared mutable state — see
+  [`CLAUDE.md` §0](CLAUDE.md).
 - **No plaintext secrets** — SOPS-encrypted only (spec `docs/07`).
 - **Phase discipline** — only build what the active roadmap phase authorizes (spec `roadmap/phases.md`).

@@ -21,7 +24,8 @@ infra/          node provisioning: OpenTofu (Proxmox VE) + cloud-init + Ansible,
 bootstrap/      one-time cluster bootstrap: Flux install, SOPS/age key, host Gitea
 platform/       platform CONTROLLERS (Flux HelmReleases / operator bases): kyverno, cilium,
                longhorn, external-snapshotter, cert-manager, externaldns, gateway, coredns,
-                vpn-egress, monitoring, cnpg, keycloak, oauth2-proxy, kubevirt
+                vpn-egress, vpn-ingress, monitoring, cnpg, keycloak, oauth2-proxy, kubevirt
+                (vpn-egress = pods OUT via PIA; vpn-ingress = remote clients IN via WireGuard)
 platform-config/ platform CONFIGS — the custom resources of the CRDs installed above
                (ClusterIssuers, Gateway, Kyverno policies, KubeVirt/CDI CRs, Keycloak CRs).
                Split out because CRs and the CRDs they use cannot apply in one pass.
@@ -94,6 +98,20 @@ The running narrative — decisions, root causes, incidents, follow-ups — is

 ## Working on this repo

+**First, get out of this checkout.** It is the operator's working copy and several agents
+share it; concurrent runs here have overwritten each other's branches and left each other's
+uncommitted files behind. One workspace per change:
+
+```bash
+git fetch origin main
+git worktree add -b <type>/<slug> /path/outside/the/repo/wt-<slug> origin/main
+cd /path/outside/the/repo/wt-<slug>
+```
+
+Outside the repo root specifically — a worktree under `.claude/worktrees/` is a second full
+copy that tree-walking gate checks then count twice. The rule, the measurements behind it, and
+the three gate workarounds a worktree needs are in [`CLAUDE.md` §0](CLAUDE.md) and §3.
+
 Everything the gate needs is baked into the pinned dev container — **do not install the
 toolchain on the host**:

@@ -359,7 +359,7 @@ storage:
                                # The live /config contents were copied onto each PVC before this landed,
                                # so API keys and credentials other apps reference were preserved.
  # THE DOWNLOADS AREA — ONE mount of the SAME export sonarr/radarr/plex already consume
-  # (192.168.2.102:/mnt/Storage/plex), narrowed by subPath to the `downloads` subtree and presented at
+  # (192.168.2.30:/mnt/Storage/plex), narrowed by subPath to the `downloads` subtree and presented at
  # /downloads, which is precisely where this app is ALREADY configured to write.
  #
  # WHY subPath: downloads AND NOT THE EXPORT ROOT AT /media (the shape sonarr/radarr use):
@@ -434,7 +434,7 @@ dependencies: []                # default-deny: reaches only DNS; arr reach it n
                                # for weeks and neither has any CNP naming the NFS server or port 2049
                                # (grep apps/wave-1/sonarr.yaml: none). The SAME fact is what keeps the VPN
                                # egress gateway off this traffic (its selector is a podSelector), and
-                                # 192.168.2.102 is inside the 192.168.0.0/16 excludedCIDR besides — see
+                                # 192.168.2.30 is inside the 192.168.0.0/16 excludedCIDR besides — see
                                # platform/vpn-egress/egress-steering.yaml, "BULK NFS".
 ingressRoutes:
  - host: qbittorrent.${BASE_DOMAIN}
@@ -102,6 +102,7 @@ data:
  # S3_BACKUP_ENDPOINT, CNPG_BACKUP_PATH; pihole + pihole-dns: PIHOLE_DNS_VIP, LAN_CIDR, plus
  # GATEWAY_VIP/UNIFI_L4_VIP/CRAFTY_L4_VIP read BY pihole to author its LAN split-horizon answers;
  # plex-remote + pihole: PLEX_L4_VIP),
+  # vpn-ingress (WG_CLIENT_CIDR),
  # velero (S3_BACKUP_ENDPOINT, S3_BACKUP_REGION,
  # VELERO_BACKUP_BUCKET, VELERO_BACKUP_PREFIX), apps-vms (UNIFI_L4_VIP). A ${TOKEN} in an
  # UNSUBSTITUTED path would ship the literal string into the cluster.
@@ -207,27 +208,54 @@ data:
  # prod -> 192.168.2.0/24  (prod LAN; nodes .10/.11/.12)
  LAN_CIDR: "192.168.1.0/24"                 # ingress scope for the PiHole DNS listener

+  # --- Remote-access VPN client subnet (platform/vpn-ingress, WireGuard) --------------------------
+  # The tunnel subnet handed to REMOTE VPN clients. `.1` is the server (the hostNetwork DaemonSet,
+  # on every node); `.2`-`.254` are devices, allocated one /32 each in
+  # platform/vpn-ingress/peers.yaml. Consumed twice in the pod's config-assembly script: to derive
+  # the server's own address, and as the `-s` match of the MASQUERADE rule that makes LAN replies
+  # routable.
+  #
+  # IT IS A KNOB RATHER THAN A LITERAL FOR ONE REASON: it is the only address range in this cluster
+  # that must be checked against EVERY OTHER range at once, so it belongs where those are declared.
+  # 10.90.0.0/24 was chosen to collide with none of them:
+  #     10.0.0.0/16     Cilium cluster-pool pod CIDR     (${CLUSTER_POD_CIDR})
+  #     10.43.0.0/16    k3s service CIDR                 (measured live 2026-10-05: kubernetes svc
+  #                                                       clusterIP 10.43.0.1)
+  #     10.72.192.0/18  the PIA tunnel's pushed addresses (platform/vpn-egress)
+  #     192.168.1.0/24  dev LAN / pfSense LAN            (${LAN_CIDR} base default)
+  #     192.168.2.0/24  prod LAN                         (${LAN_CIDR} on prod)
+  #
+  # NO PER-ENVIRONMENT OVERRIDE, and that is deliberate rather than an omission: unlike every VIP
+  # above, this range is NOT drawn from the LAN. It is private to the tunnel, so the same value is
+  # correct in both environments and a prod patch would be a no-op that implies otherwise.
+  #
+  # IF YOU CHANGE IT, every already-issued client profile breaks (its `Address` is from this range)
+  # and must be re-rendered — so treat it as fixed once the first device is enrolled.
+  WG_CLIENT_CIDR: "10.90.0.0/24"             # remote VPN clients; .1 = server. NOT a LAN range
+
  # --- Bulk (external NFS) storage host (docs/04 bulk tier) ---------------------------------------
-  # THE address of the Proxmox host whose ZFS datasets back every `class: bulk` volume: the media
-  # library (Storage/plex, 8.33 T — plex, sonarr, radarr) and the legacy Nextcloud archive
+  # THE address of the NAS whose ZFS datasets back every `class: bulk` volume: the media library
+  # (Storage/plex, 8.33 T — plex, sonarr, radarr, qbittorrent) and the legacy Nextcloud archive
  # (Storage/nextcloud, 270 G). The renderer emits it into each static NFS PersistentVolume's
  # `spec.nfs.server` (catalog/render.py, BULK_NFS_SERVER); the export PATH is per-dataset and is
  # declared in the ServiceDefinition, because the path is identical in every environment and only
  # the ADDRESS is not.
  #
-  # WHY THIS IS A KNOB AND NOT A LITERAL — the two clusters are on OPPOSITE SIDES of pfSense.
-  # The storage host has exactly one interface, vmbr0 192.168.1.9/24, on pfSense's LAN.
-  #   dev  nodes are 192.168.1.40/.41/.42 — the SAME L2 segment. They reach it directly, and one
-  #        NFS export to them already exists on that host (/mnt/Storage/k8s-volumes in
-  #        /etc/exports), so this path is proven, not theoretical. Base default = the dev value,
-  #        per the convention of the LAN block above.
-  #   prod nodes are 192.168.2.10/.11/.12 — pfSense's WAN. tcp/2049 does NOT traverse that today;
-  #        22 and 8006 answer only because pfSense port-forwards them via 192.168.2.102. Opening
-  #        the storage path is a PENDING OPERATOR DECISION with two candidate outcomes that give
-  #        DIFFERENT values here: 192.168.2.102 (another port-forward) or 192.168.1.9 (a route).
-  # So prod holds a loud TBD-PROD-* placeholder — see clusters/prod/kustomization.yaml for the
-  # blast radius of shipping it unset, which is NOT the usual "fails to apply".
-  BULK_NFS_SERVER: "192.168.1.9"
+  # IT IS NO LONGER A CROSS-NETWORK KNOB (2026-10-07). This used to read "the two clusters are on
+  # OPPOSITE SIDES of pfSense": the datasets lived on a Proxmox host whose only interface was
+  # vmbr0 192.168.1.9/24 on pfSense's LAN, which prod (192.168.2.0/24, pfSense's WAN) could reach
+  # only through a DNAT at 192.168.2.102. Both pools were physically moved onto a standalone
+  # TrueNAS at 192.168.2.30 — prod's OWN /24 — so there is no crossing to arrange and no candidate
+  # values to choose between. Measured 2026-10-07: 192.168.2.102:2049 no longer answers;
+  # 192.168.2.30:2049 and :111 do. There is now exactly ONE storage host and one correct value;
+  # this stays a knob only because the renderer reads it per-environment.
+  #
+  # *** CHANGING THIS VALUE IS NOT A PLAIN RECONCILE. *** A bound PersistentVolume's spec.nfs is
+  # immutable — measured by server dry-run 2026-10-07:
+  #     spec.persistentvolumesource: Forbidden: spec.persistentvolumesource is immutable after creation
+  # so Flux's apply FAILS rather than updating, and the pods keep their old mount. The PVs must be
+  # deleted and recreated; the operator sequence is docs/BULK-NFS-STORAGE.md §10.
+  BULK_NFS_SERVER: "192.168.2.30"

  # Off-cluster S3 backup target (R-STATE-03, R-IDP-05) — the on-Proxmox MinIO, plain HTTP, path-style.
  # Consumed by BOTH backup paths: every CNPG Cluster's barmanObjectStore.endpointURL (keycloak-db,
@@ -71,6 +71,13 @@ resources:
  # controller must NEVER gate the platform chain; same non-gating rationale as headlamp/oauth2-proxy.
  # Carries velero-cloud.sops.yaml, so clusters/dev adds a SOPS decryption patch for it (by name).
  - backup.yaml          # Flux Kustomization -> ./platform/velero (dependsOn platform-config)
+  # WireGuard remote-access VPN (north-south INGRESS, udp/51820) — POST-platform tier
+  # (dependsOn platform-config, wait:false). NOT the same thing as platform/vpn-egress, which sends
+  # pods OUT through PIA; this lets remote CLIENTS IN. Non-gating is load-bearing rather than
+  # conventional here: its DaemonSet cannot start until the operator creates the out-of-band
+  # `wg-server-key` Secret, so in the gating `platform` tier an unfinished manual step would have
+  # stalled every apps wave. Carries no SOPS secret, so neither overlay adds a decryption patch.
+  - vpn-ingress.yaml     # Flux Kustomization -> ./platform/vpn-ingress (dependsOn platform-config)
  # PM agent — reads Gitea issues and runs one worker agent per assignment that authors a
  # change, gates it and opens a pull request. POST-APP tier (dependsOn apps-wave-0,
  # wait:false): what it needs is GITEA, not Keycloak or the Gateway, and it must never gate
@@ -0,0 +1,59 @@
+---
+# Flux Kustomization: WireGuard remote-access VPN — reconciles ./platform/vpn-ingress.
+#
+# POST-PLATFORM TIER (dependsOn platform-config), NON-GATING (wait:false). Not a line in
+# platform/kustomization.yaml, for the standard reason plus one specific to this component:
+#
+#   * STANDARD: a leaf must never sit in the gating `platform` tier. While `platform` is not-Ready
+#     NOTHING downstream reconciles — the incident behind the headlamp/oauth2-proxy/homepage moves
+#     (DECISIONS-LOG: "Headlamp gating stall").
+#   * SPECIFIC, AND THE REASON THIS IS NOT A JUDGEMENT CALL: this DaemonSet cannot start until the
+#     operator replaces the `REPLACE-ME` placeholder in platform/vpn-ingress/wg-server-key.sops.yaml
+#     with a real key (runbooks/vpn-remote-access.md step 2). That is the correct fail-closed state — an unenrolled VPN must not come up — but in
+#     the gating tier it would have been a self-inflicted platform-wide outage ON MERGE, with the
+#     cause (a missing manual step) invisible from any Flux condition.
+#
+# WHY dependsOn platform-config AND NOT cilium. This component needs no Gateway, no TLS cert, no
+# Keycloak and no LB-IPAM pool — it has no HTTPRoute and no LoadBalancer Service, and hostNetwork
+# means it does not even need a Cilium endpoint. It could legally reconcile much earlier. It is
+# pinned behind platform-config anyway so that the ONE thing remote clients actually consume
+# through it — split-horizon DNS and the shared Gateway — exists by the time the tunnel does.
+# A tunnel that comes up before the things on the far side of it is a support call, not a feature.
+#
+# wait:false: nothing in the graph dependsOn this, and its pods are legitimately not-Ready whenever
+# the server key is absent or the `wireguard` kernel module has not been loaded on a node. Neither
+# condition should be able to gate anything else, even if a future resource is mistakenly pointed
+# at it.
+apiVersion: kustomize.toolkit.fluxcd.io/v1
+kind: Kustomization
+metadata:
+  name: vpn-ingress
+  namespace: flux-system
+spec:
+  interval: 10m
+  retryInterval: 2m
+  timeout: 5m
+  prune: true
+  wait: false
+  dependsOn:
+    - name: platform-config
+  sourceRef:
+    kind: GitRepository
+    name: flux-system
+  path: ./platform/vpn-ingress
+  # REQUIRED, not boilerplate: platform/vpn-ingress/daemonset.yaml renders ${WG_CLIENT_CIDR} into
+  # the config-assembly script. Without this block that token becomes the EMPTY STRING and the
+  # Kustomization still reports Ready (Flux's substitution fails OPEN — ci:
+  # flux-postbuild-substitution), leaving an initContainer that derives a server address of ".1/"
+  # and a MASQUERADE rule with no source. Both fail loudly at pod start, but the Kustomization
+  # would look healthy.
+  postBuild:
+    substituteFrom:
+      - kind: ConfigMap
+        name: cluster-vars
+  # SOPS decryption is layered per-environment by the overlay (clusters/dev and clusters/prod each
+  # patch THIS Kustomization by name), identical to headlamp/crafty/velero — this path carries
+  # platform/vpn-ingress/wg-server-key.sops.yaml, the WireGuard server private key. The `sops-age`
+  # Secret is created out of band and referenced by NAME only. Without the overlay patch the Secret
+  # applies cleanly full of ENC[...] and only the tunnel is broken, so the patch is as load-bearing
+  # as the encrypted file itself.
@@ -122,6 +122,24 @@ patches:
          provider: sops
          secretRef:
            name: sops-age
+  # vpn-ingress (the WireGuard remote-access VPN, clusters/base/vpn-ingress.yaml) carries
+  # platform/vpn-ingress/wg-server-key.sops.yaml — the WireGuard SERVER private key, the one
+  # secret in that component. Without this stanza kustomize hands Flux the raw ciphertext and the
+  # Secret applies full of ENC[...]: the APPLY SUCCEEDS and every Flux condition stays green, and
+  # the only symptom is a VPN that no client can handshake with. The DaemonSet's init container
+  # validates the value with `wg pubkey` specifically so that state is a named CrashLoop instead.
+  # The `sops-age` Secret is out-of-band (name only).
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: vpn-ingress
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
  # pm-agent (the Program Manager agent service, clusters/base/pm-agent.yaml) carries
  # pm-agent-credentials.sops.yaml — the Gitea write token for the dedicated non-admin bot
  # account and the Anthropic subscription token from `claude setup-token`. Without this
@@ -261,15 +279,15 @@ patches:
      - op: replace
        path: /data/CRAFTY_L4_VIP
        value: "192.168.1.55"
-      # Bulk (external NFS) storage host: the Proxmox host itself, on the SAME LAN as dev's nodes
-      # (192.168.1.40/.41/.42), which already hold an NFS export from it (/mnt/Storage/k8s-volumes).
-      # Restated verbatim rather than inherited, per this overlay's "supply every knob" convention.
-      # Dev is therefore the environment in which the bulk manifests can actually be VALIDATED
-      # end-to-end before prod's network path exists — provided the additive `zfs set sharenfs=`
-      # change described in docs/BULK-NFS-STORAGE.md is applied for the dev node addresses.
+      # Bulk (external NFS) storage host. THIS VALUE IS INERT — dev is decommissioned, its nodes
+      # (192.168.1.40/.41/.42) no longer exist, and the Proxmox host this used to name (192.168.1.9)
+      # went with the pools it held. It is restated per this overlay's "supply every knob"
+      # convention, not because anything consumes it. It carries the real address so that no file
+      # in the tree renders a host that is gone; it has NOT been proven from a dev node, because
+      # there is no dev node to prove it from.
      - op: replace
        path: /data/BULK_NFS_SERVER
-        value: "192.168.1.9"
+        value: "192.168.2.30"
      # Off-cluster backup target: the on-Proxmox MinIO (plain HTTP, path-style) that every CNPG
      # barmanObjectStore and Velero's backupStorageLocation write to.
      #
@@ -113,6 +113,24 @@ patches:
          provider: sops
          secretRef:
            name: sops-age
+  # vpn-ingress (the WireGuard remote-access VPN, clusters/base/vpn-ingress.yaml) carries
+  # platform/vpn-ingress/wg-server-key.sops.yaml — the WireGuard SERVER private key, the one
+  # secret in that component. Without this stanza kustomize hands Flux the raw ciphertext and the
+  # Secret applies full of ENC[...]: the APPLY SUCCEEDS and every Flux condition stays green, and
+  # the only symptom is a VPN that no client can handshake with. The DaemonSet's init container
+  # validates the value with `wg pubkey` specifically so that state is a named CrashLoop instead.
+  # The `sops-age` Secret is out-of-band (name only).
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: vpn-ingress
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
  # pm-agent (the Program Manager agent service, clusters/base/pm-agent.yaml) carries
  # pm-agent-credentials.sops.yaml — the Gitea write token for the dedicated non-admin bot
  # account and the Anthropic subscription token from `claude setup-token`. Without this
@@ -522,60 +540,48 @@ patches:
        path: /data/LAN_CIDR
        value: "192.168.2.0/24"
      # ------------------------------------------------------------------------------------------
-      # BULK (EXTERNAL NFS) STORAGE HOST — *** NOT YET DECIDED. THIS PLACEHOLDER IS LOAD-BEARING. ***
+      # BULK (EXTERNAL NFS) STORAGE HOST — the TrueNAS at 192.168.2.30.
      # ------------------------------------------------------------------------------------------
      # Backs every `class: bulk` volume: the 8.33 T media library (Storage/plex — plex, sonarr,
-      # radarr) and the 270 G legacy Nextcloud archive (Storage/nextcloud).
+      # radarr, qbittorrent) and the 270 G legacy Nextcloud archive (Storage/nextcloud).
      #
-      # THE STORAGE HOST IS NOT REACHABLE FROM PROD AT ALL RIGHT NOW. It has one interface,
-      # vmbr0 192.168.1.9/24, on pfSense's LAN; prod's nodes are on 192.168.2.0/24, pfSense's WAN.
-      # 22 and 8006 answer from prod only because pfSense port-forwards them via 192.168.2.102;
-      # 2049 and 111 do not. Opening that path is an OPERATOR decision, and the two candidate
-      # outcomes give DIFFERENT values here:
-      #     port-forward 192.168.2.102:2049 -> 192.168.1.9:2049   =>  "192.168.2.102"
-      #     a WAN->LAN route to 192.168.1.0/24                    =>  "192.168.1.9"
-      # Guessing either one authors a prod cluster that mounts nothing, or — worse, if the guess
-      # ever became reachable — mounts something unintended. So it stays a placeholder.
+      # THIS WAS THE REPO'S ONE LOAD-BEARING PLACEHOLDER, AND THE REASON IT COULD BE IS NOW GONE.
+      # The datasets lived on a Proxmox host with a single interface on pfSense's LAN
+      # (192.168.1.9), which prod could reach only through a DNAT at 192.168.2.102 — so the correct
+      # value here depended on an undecided operator choice, and guessing it would have authored a
+      # cluster that mounts nothing. Both pools were physically moved onto a standalone TrueNAS at
+      # 192.168.2.30, prod's OWN /24. No crossing to arrange, no candidates to choose between.
+      # Measured 2026-10-07: 192.168.2.102:2049 no longer answers; 192.168.2.30:2049 and :111 do.
      #
-      # WHICH PORTS THE DECISION MUST OPEN: exactly ONE, tcp/2049. The PVs mount nfsvers=4.1, and
-      # NFSv4 carries mount and lock in-protocol — no rpcbind/111, no mountd, no statd. Choosing v4
-      # over v3 was in part this decision's cost: v3 would have needed four ports and three of them
-      # on ephemeral numbers.
-      #
-      # WHAT THE EXPORT MUST ALLOW IS ALREADY SETTLED, and it is the same under BOTH outcomes.
-      # Measured 2026-09-07 from this workstation (192.168.2.132) through the existing port-forward:
-      # the storage host logged the connection as coming FROM 192.168.2.132, not from a pfSense LAN
-      # address (`ss -tn` peer 192.168.2.132, and the host's only route off-LAN is its default via
-      # 192.168.1.1). pfSense DNATs WITHOUT source NAT, so the NFS server will see prod's REAL node
-      # addresses either way. The additive `zfs set sharenfs=` values are in docs/BULK-NFS-STORAGE.md.
-      #
-      # *** BLAST RADIUS — READ BEFORE MERGING THIS TO A BRANCH PROD RECONCILES. ***
-      # A PersistentVolume's spec.nfs.server is an unvalidated string: the API server ACCEPTS this
-      # placeholder, the PV is created and the PVC BINDS to it (binding is pure control-plane). The
-      # failure surfaces only when a pod mounts — MountVolume.SetUp "Failed to resolve server
-      # TBD-PROD-BULK-NFS-SERVER" — so plex, sonarr, radarr and nextcloud would sit in
-      # ContainerCreating on prod. Unlike the LAN knobs above, this placeholder does NOT fail at
-      # apply time and there is no CRD validation to lean on. Set this value BEFORE prod reconciles
-      # a revision containing the bulk volumes; the dev overlay renders a working value, which is
-      # where these manifests are meant to be proven first.
+      # ONE PORT IS STILL ALL IT NEEDS: tcp/2049. The PVs mount nfsvers=4.1 and NFSv4 carries mount
+      # and lock in-protocol — no rpcbind/111, no mountd, no statd. The NAS advertises
+      # `+3 +4 +4.1 +4.2` (/proc/fs/nfsd/versions, measured), so 4.1 negotiates.
      - op: replace
        path: /data/BULK_NFS_SERVER
-        # 192.168.2.102 is pfSense's WAN address, which DNATs tcp/2049 through to the Proxmox
-        # host's REAL address 192.168.1.9 on pfSense's LAN. Prod sits on the WAN side and cannot
-        # reach 192.168.1.9 directly, so the cluster mounts the NAT address. Dev is on the LAN and
-        # keeps the base value 192.168.1.9.
+        # VERIFIED ON THE NAS 2026-10-07, before any cluster touched it (`exportfs -v`):
+        #   /mnt/Storage/plex       192.168.2.10/.11/.12  rw,sec=sys,secure,root_squash,no_all_squash
+        #   /mnt/Storage/nextcloud  192.168.2.10/.11/.12  ro,sec=sys,secure,root_squash,no_all_squash
        #
-        # PROVEN from k3s-prod-1 on 2026-09-12, not inferred:
-        #   - mount of 192.168.2.102:/mnt/Storage/plex negotiated nfs4 vers=4.1 proto=tcp
-        #   - a write as uid 1000 succeeded. Tested as 1000 and NOT root deliberately: the export
-        #     carries no_root_squash, so a root write would have passed and proved nothing, while
-        #     LSIO images default to PUID 911 and would have gone Ready then failed every import
-        #     with EACCES. The tree is 0755 1000:3000, so uid 1000 is the only writer.
-        #   - ln() across downloads/ -> tv/ returned link count 2 (same inode), so the arrs get
-        #     real atomic moves instead of silently degrading to copy-then-delete on EXDEV.
-        # pfSense DNATs WITHOUT source NAT (the host logs prod's own node addresses as the peer),
-        # so the ZFS export ACL names 192.168.2.10/.11/.12 directly rather than one translated IP.
-        value: "192.168.2.102"
+        # no_all_squash is the flag the entire permission model rests on: client uids pass through
+        # untouched, so the arrs' PUID=1000 arrives as the owner of a 0755 1000:3000 tree. sec=sys
+        # keeps that numeric rather than principal-mapped. The export deliberately does NOT carry
+        # no_root_squash, which the Proxmox one did: nothing here needs it, because every write to
+        # the tree happens after the LSIO drop to uid 1000 and the images only chown their Longhorn
+        # /config. Both subPath directories (plex/downloads, nextcloud/nextcloud) already exist at
+        # 0755 1000:3000, so a squashed root can still traverse them for subPath resolution.
+        #
+        # The ro= posture on the archive is now SERVER-enforced, which the old export also managed.
+        # The media tree's read-only half (plex) stays a CLIENT-side guarantee — all four media pods
+        # can land on any node, so the server sees the same three addresses for reader and writers
+        # alike and cannot tell them apart. Unchanged by the move; see docs/BULK-NFS-STORAGE.md §5.
+        #
+        # *** CHANGING THIS VALUE REQUIRES DELETING AND RECREATING THE PVs. *** A bound PV's
+        # spec.nfs is immutable — measured by server dry-run 2026-10-07:
+        #     spec.persistentvolumesource: Forbidden: spec.persistentvolumesource is immutable after creation
+        # so Flux's apply FAILS rather than updating and the pods keep their old, dead mount. The
+        # operator sequence is docs/BULK-NFS-STORAGE.md §10. Retain + the renderer's pre-set
+        # claimRef make it safe: no data is touched and each recreated PV rebinds its own PVC.
+        value: "192.168.2.30"
      # ==========================================================================================
      # OFF-CLUSTER DR TARGET — Cloudflare R2 (operator, 2026-09-05; bucket + token 2026-09-07).
      # ==========================================================================================
@@ -0,0 +1,147 @@
+---
+date: 2026-10-05
+branch: docs/agents-work-in-their-own-workspace
+title: One workspace per agent run — the shared checkout is now documented as off-limits
+---
+
+## What changed
+
+Agents have been doing their work in the operator's checkout at
+`/var/home/keith/source/home-network-k3s-impl` and clobbering each other. Nothing in the tree
+told them not to: worktrees appeared in CLAUDE.md only as §3's *gate workarounds*, i.e. as an
+awkward edge case, and `decisions/README.md` asserted worktree isolation as a fact about how
+agents already behave rather than as a rule they must follow. Nowhere was the rule stated.
+
+Documentation only — no code, no manifests, no pipeline logic.
+
+- **`CLAUDE.md`: new `## 0. Work in your OWN workspace. Never in the shared checkout.`**
+  Placed before §1 so the section numbers every other file and handoff entry cites (§1, §2b,
+  §3, §7) all keep their meaning. It gives the three commands (`git fetch origin main`;
+  `git worktree add -b <type>/<slug> <path outside the repo> origin/main`; `cd`), an explicit
+  do-not list for the shared checkout (no `checkout`/`switch`, no edits, no
+  `add`/`commit`/`stash`/`restore`, no removing others' worktrees), a measurement table, the
+  "put it outside the repo root" rule, cleanup, what to do if you are already standing in the
+  shared checkout with edits, and what a PM must put in a brief it writes for another agent.
+- **`CLAUDE.md` intro** now says "Start with §0", with the reason: it is the rule you can
+  break before you have read anything else.
+- **`CLAUDE.md` §3** retitled "Running the gate from a worktree" and reframed as the normal
+  path rather than an edge case, since §0 now makes every gate run a worktree run. Its list
+  grew from two breakages to three: `spec-immutability`'s skip is *avoidable*, not merely
+  tolerated, if the `ENGINE` shim also mounts the sibling spec repo read-only and passes
+  `-e SPEC_REPO=/home-network-k3s`.
+- **`CLAUDE.md` §4** gained "One branch, one workspace, one PR".
+- **`README.md`**: a fourth non-negotiable rule ("No work in a shared checkout"), and
+  "Working on this repo" now opens with how to get out of the checkout before describing the
+  dev container that runs in it.
+- **`decisions/README.md`**: the worktree-isolation sentence now cites §0 as the requirement
+  instead of describing it as something agents happen to do.
+
+I did this work the way the new §0 requires — a worktree at
+`<session scratchpad>/wt-workspace-rule`, outside the repo root, branched from `origin/main`,
+with the shared checkout left on the branch and with the untracked files I found in it.
+
+## What I verified
+
+Every number in the new §0 table was measured in the shared checkout on 2026-10-05, not
+recalled:
+
+| Claim | Command | Value |
+|---|---|---|
+| shared HEAD is yanked between branches | `git reflog \| grep -c 'checkout: moving'` | **107** |
+| it is not sitting on `main` | `git worktree list` | `feat/pm-agent-issue-to-pr` |
+| other runs' uncommitted work is in it | `git status --porcelain` | **2** trees: `infra/agent/` (22:04), `platform/pm-agent/` (22:09) — `stat -c %y` |
+| its `main` is stale | `git rev-parse main` vs `origin/main` | `4386d14` vs `22c94ef`, **2 behind** |
+| worktrees registered / already merged | `git worktree list --porcelain` + `git merge-base --is-ancestor <b> main` | **42** branches, **31** merged |
+| nested worktrees are a gate hazard | `grep -rl '\.claude' conformance/tests platform/monitoring/tests` | **9** scripts carry an explicit exclusion |
+| the 18× double-count | read `platform/monitoring/tests/run.sh:115-123` | in-tree comment, observed 2026-09-12 |
+
+**The failure mode was observed live, mid-session, not just reconstructed.** The two untracked
+trees I measured at 22:04 and 22:09 were committed at 22:20 by another run — `5334abe`
+`feat(pm-agent): an in-cluster AI Program Manager...`, 1,000+ lines across `infra/agent/`,
+`clusters/`, `catalog/`, `apps/`, `docs/plans/` and its own `decisions/` entry — onto the shared
+checkout's checked-out branch. Measured after the fact: the shared checkout's HEAD moved
+`22c94ef` → `5334abe` and its working tree went clean between my first `git status` and my last,
+with `git log -1` naming a commit that is not mine. That is §0's "shared HEAD" row happening
+during the session that wrote §0, and it is now cited in the doc.
+
+**A claim of mine was wrong and is corrected in the doc.** I had it recorded that
+`git worktree remove` is blocked by the agent sandbox. Provoked rather than assumed: created
+a throwaway detached worktree in the scratchpad and removed it — **rc 0**, and
+`git worktree list` no longer shows it. §0 therefore tells agents to remove their own, and
+scopes the "blocked" note to what it actually covers: *other* sessions'
+`.claude/worktrees/agent-*`, some of which are additionally `locked` on git's own terms. The
+`rework/<pr-number>` escape hatch is now scoped to someone else's stale worktree holding a
+branch, which is a real and separate problem (31 of them). Both of my own worktrees in this
+session were removed cleanly at rc 0 after pushing.
+
+`spec-immutability` is avoidable-not-tolerated: taken from
+`decisions/2026-10-01-render-selftest-runs-in-gate.md`, which records
+`stage spec-immutability: pass` under the two-mount shim plus `-e SPEC_REPO=/home-network-k3s`.
+
+**Gate — `rc 3`, UNDETERMINED, and I am not calling it green.** Pinned toolbox, from this
+worktree, `DEV_KUBECONFIG=/dev/null` and an `ENGINE` shim bind-mounting both the main
+checkout's `.git` (at its own host path) and the sibling spec repo read-only with
+`-e SPEC_REPO=/home-network-k3s`:
+
+    ENGINE=<two-mount shim> DEV_KUBECONFIG=/dev/null       ./infra/devcontainer/dev.sh run bash -c './ci/gate.sh'   # rc 3
+
+| stage | result |
+|---|---|
+| spec-immutability | **pass** — it genuinely RAN; the second mount is what makes it run from a worktree |
+| approval-policy | pass, but **N/A**: `event='none'`. It cannot see a PR locally, so this green says nothing. See below |
+| decisions-log | pass — the three required headings and the frozen-archive pin |
+| lint · l0 · render-golden · l1 | pass (L1: 3 offline checks, 0 failures, 0 skips, 0 unwired) |
+| gitea-settings | **SKIPPED** — `SETTINGS_API_TOKEN` unset; it exists only in CI |
+| conformance (L2/L3) | SKIPPED — `CLUSTER_AVAILABLE!=true`; the decision notes no cluster-needing requirement was touched |
+
+`gitea-settings` is the *only* stage that did not run, and it cannot be made to run from a
+workstation, so rc 3 is the ceiling for any local run — not a defect in this branch. The
+first gate attempt returned rc 3 for a different and real reason (`HEAD is not ahead of
+origin/main`: I had not committed yet, so the touched-requirement set was empty by default
+rather than by verification); it was re-run after committing, and the table above is the
+post-commit run. §3 now records both expected skips, because it previously named only
+`spec-immutability`.
+
+## What I did NOT verify
+
+- **GATE: UNVERIFIED at the time of writing.** The pinned-toolbox result for this branch and
+  its exit code are reported in the PR, not predicted here. **A local rc 3 is not green** and
+  will not be described as one.
+- **CI gate: RED, measured — `MERGE GATE: BLOCKED`, one failing stage.** Run 245 on PR #56,
+  head `b988da8b`, 1m47s. The only failure is `approval-policy`: *"a sensitive change lacks a
+  non-author approval"*, `sensitive paths touched: CLAUDE.md`, author `gitea-admin`. Every other
+  stage passed — `decisions-log`, `lint`, `l0`, `render-golden`, `l1`, and `gitea-settings`
+  (which can only run in CI, and reported `required_approvals = 0`,
+  `dismiss_stale_approvals = true`). `spec-immutability` SKIPPED in CI (no sibling spec repo in
+  the CI workspace — the inverse of the local run, where the two-mount shim made it pass) and
+  `conformance` SKIPPED. **Note `gate / conformance (pull_request)` reports status `success`
+  with description "Has been skipped"** — CLAUDE.md §2b's trap, live on this very PR. Nothing
+  in this branch is broken; the red is the structural human gate, below. *Measured at
+  `b988da8b`; this entry was then amended to record it, so the head SHA in the PR is newer than
+  the run quoted here and CI re-ran on the amended commit.*
+- **This PR is a sensitive-path PR and is CI-RED on `approval-policy` until a human acts.**
+  `CLAUDE.md` is in `infra/gitea/approval-policy.json`'s `sensitive_paths` ("the delivery
+  contract agents follow"), so the stage requires an approving review from someone who is not
+  the author, or an `/approve-override <reason>` posted by an administrator **as a PR review
+  of type "Comment"**, not in the plain comment box. `ci/approval-policy.sh` run locally
+  reports N/A (it cannot see a PR), so the local gate cannot catch this and a green local run
+  says nothing about it. **I have not posted an override and must not** — CLAUDE.md §1 forbids
+  an agent clearing this on its own PR even though `gitea-admin` holds `owner` and could.
+- **Nothing here is enforced.** §0 is prose. There is no gate stage that detects work done in
+  the shared checkout, no check that a worktree is outside the repo root, and no check that a
+  branch was cut from `origin/main`. Every other rule in CLAUDE.md that agents kept breaking
+  (`DECISIONS-LOG.md` appends, the three handoff headings) ended up as a gate stage, and that
+  is the honest follow-up here. I did not write one: the ask was documentation, and an
+  enforcement stage lands in `ci/**`, which is itself a sensitive path and deserves its own PR.
+- **I did not clean up the 31 stale merged worktrees or the 35 nested under
+  `.claude/worktrees/`.** They are other sessions' workspaces; removing them is an operator
+  action, and §0 explicitly tells agents not to remove worktrees they did not create.
+- **I did not touch the untracked `infra/agent/` and `platform/pm-agent/` trees** sitting in the
+  shared checkout. They are another run's in-flight work. Whose, and whether they are wanted,
+  is unknown to me.
+- **`docs/plans/ssd-etcd-execution-runbook.md:18` still points at a `.claude/worktrees/` path**
+  inside the repo. Left as-is deliberately: that runbook is marked COMPLETED/historical and
+  describes the now-decommissioned dev cluster, so the path is a record of what was done, not
+  an instruction. It does mean a grep for in-repo worktree paths is not yet clean.
+- **No runtime, cluster or Flux behaviour was touched or checked.** This branch changes three
+  Markdown files; `kubectl` was not run.
@@ -167,6 +167,55 @@ All offline, in the pinned toolbox (`./infra/devcontainer/dev.sh run`), never on
  >= 2.1.259, which is why the image asserts a version floor. The pin `2.1.285` is the npm
  registry's `stable` dist-tag, measured on 2026-10-05.

+## Merged `main` in, after PR #55 and #56 landed
+
+One conflict, in `clusters/base/kustomization.yaml`: PR #55 (vpn-ingress) and this branch
+both appended a resource line to the same tail. Resolved by keeping both, main's first —
+`vpn-ingress` is a platform-config-tier leaf and `pm-agent` dependsOn `apps-wave-0`, which
+is later. Nothing else conflicted; `runbooks/kustomization.yaml` auto-merged with both
+entries, and the handoff entries are separate files with nothing to merge, which is exactly
+what `decisions/` being a directory buys.
+
+**PR #56 added `CLAUDE.md` §0 — work in your own worktree, never the shared checkout —
+while this branch was open, and it named this run's uncommitted directories as its
+measured example.** Two consequences were handled rather than noted:
+
+- This merge, and everything after it, was done in a worktree outside the repository root
+  (`/var/home/keith/source/wt-pm-agent`), per §0.
+- **§0 would have misled a worker agent, so `infra/agent/worker-rules.md` now says so
+  explicitly.** A worker reads `CLAUDE.md` first, and §0's instruction is to create a
+  worktree outside the shared checkout. There is no shared checkout in a worker's container
+  — it holds a fresh clone of its own, which is what §0 is actually asking for — and a
+  worker that obeyed §0 literally would `git worktree add`, edit somewhere the wrapper does
+  not look, and have its work committed by nobody while the issue got a "changed nothing"
+  report. The rules file now tells it §0 is already satisfied and not to make a worktree.
+
+**The operator's approving review goes STALE on each new head, and the gate does not care.**
+I first wrote here that it would need re-approving. That was wrong, and the correction is
+worth keeping because it is a fact about this repository's gate rather than about this
+change:
+
+- Measured on the live branch protection: `dismiss_stale_approvals = true`,
+  `ignore_stale_approvals = false` — so pushing the merge did stale `jakman85`'s review
+  (confirmed: `GET /pulls/57/reviews` → `APPROVED`, `stale: true`).
+- But `ci/approval-policy.sh` selects reviews on `.state == "APPROVED"` and
+  `.user.login != author` and reads **nothing about staleness** (line 147). So a stale
+  approval still satisfies the sensitive-path rule.
+- And `required_approvals = 0`, so Gitea's own merge button never required one either.
+
+Measured, not inferred: CI run **#257** on the merged head printed
+`approved by 'jakman85' (author 'gitea-admin') — sensitive change is human-reviewed.` →
+`stage approval-policy: pass`, with `gitea-settings: pass` as well. The job's own exit was
+`MERGE GATE: UNDETERMINED` (rc 3 — `spec-immutability` and `conformance` skipped, as the
+workflow tolerates with `|| [ $? -eq 3 ]`), so the required check
+`gate / gate (pull_request)` is **green** and PR #57 reports `mergeable: true`.
+
+Nothing is therefore waiting on the operator except **the merge itself**, which is theirs
+by CLAUDE.md §1 and never an agent's. Worth noting for whoever reads this later: the rule
+"push again and you must override again" applies to the `/approve-override` **directive**,
+which is staleness-checked against the head commit — not to an ordinary approving review,
+which this gate accepts stale.
+
 ## What I did NOT verify

 **Nothing in this change has run.** That is the headline, and everything below is a
@@ -0,0 +1,127 @@
+---
+date: 2026-10-05
+branch: docs/pm-agent-registry-pull-prereq
+title: pm-agent reconciled exactly as designed — and is the first workload ever to pull from the in-cluster registry, which does not work yet
+---
+
+## What changed
+
+Documentation only. No manifest, no policy, no code.
+
+PR #57 merged and `pm-agent` reconciled. I measured what landed, and the measurement turned
+up **two prerequisites for the next operator step that nothing in this repository
+declares** — and that the handoff entry for #57 could not have known, because it listed the
+image pull as unverified and that is exactly where it bit.
+
+So this entry records the post-merge measurement, and
+`platform/pm-agent/README.md`, `docs/plans/pm-agent-issue-to-pr.md` and
+`runbooks/pm-agent.md` now name both prerequisites where they say "build, push, pin the
+digest". Before this, that step read as one action; it is three, and the two new ones are
+not an agent's to perform.
+
+**The finding is not specific to pm-agent.** `conformance-runner` has the identical
+registry path (`gitea.home.keithjackson.dev/home-network/...`), the identical "operator
+pushes, a digest goes in a PR" model, and has never been pulled either — so the same two
+blockers sit in front of the L2/L3 conformance wiring. Measured: **no pod anywhere in the
+cluster references that registry** except the pm-agent dispatcher, which is therefore the
+first workload ever to try it.
+
+## What I verified
+
+Read-only, through the pinned toolbox, against the live prod cluster.
+
+**The merge reconciled, completely and exactly as designed.**
+
+- `GitRepository/flux-system` artifact revision: `main@sha1:95597bd6883637…` — the merge
+  commit. `platform-config`, `pm-agent` and `apps-wave-0` all report that same
+  `lastAppliedRevision` with `Ready=True`. Compared field to field, per CLAUDE.md §2b,
+  rather than assumed from the merge.
+- **The security boundary is live.** `ClusterPolicy/pm-agent-job-shape`:
+  `validationFailureAction=Enforce`, `failurePolicy=Fail`, `Ready=True`, and all six rules
+  present (`worker-must-be-the-committed-shape`,
+  `worker-must-be-one-container-with-no-args`,
+  `worker-volumes-must-be-workspace-or-tmp-emptydirs`,
+  `worker-may-not-declare-init-or-ephemeral-containers`,
+  `worker-env-names-must-be-the-committed-set`, `worker-may-not-use-envfrom`). This is the
+  check that mattered most: a ClusterPolicy added to the wrong kustomization list ships
+  green and never reaches the cluster, which is what happened to the conformance boundary
+  on 2026-09-29.
+- Namespace contents: both ServiceAccounts, `pm-agent-config` (17 keys), the
+  `pm-agent-credentials` Secret, the `default-deny` NetworkPolicy, and both
+  CiliumNetworkPolicies with `VALID=True`.
+- **SOPS decryption works through the new overlay patch.** Checked by KEY NAMES and VALUE
+  LENGTHS only, never values (CLAUDE.md §6): keys `gitea-token`, `claude-code-oauth-token`,
+  lengths 76 and 52 bytes — which are the base64 lengths of the committed placeholder
+  strings, so the Secret holds the decrypted placeholders and not ciphertext. A
+  ciphertext apply succeeds silently and would have left `ENC[AES256_GCM,…]` values an
+  order of magnitude longer.
+- **`pm-agent-worker` really is bound to nothing.** The namespace has exactly one
+  RoleBinding (`pm-agent` → Role `pm-agent`, subject `ServiceAccount/pm-agent`), and no
+  ClusterRoleBinding anywhere names either pm-agent ServiceAccount.
+- `gitea-allow-pm-agent-ingress` is applied in the `gitea` namespace, matching
+  `io.kubernetes.pod.namespace: pm-agent`.
+- The dispatcher is `ImagePullBackOff` on the all-zero placeholder digest — the designed,
+  visible failure.
+
+**The two prerequisites, measured.**
+
+1. **The nodes cannot verify the registry's TLS certificate.** containerd's error on the
+   pull is not about the digest:
+
+       failed to resolve reference "gitea.home.keithjackson.dev/home-network/agent-runner@sha256:000…":
+       tls: failed to verify certificate: x509: certificate is not valid for any names,
+       but wanted to match gitea.home.keithjackson.dev
+
+   "not valid for **any** names" means the certificate presented to the node carries no
+   matching SAN at all. From the operator's workstation the same name is healthy: it
+   resolves to `192.168.2.20` and serves a Let's Encrypt certificate
+   `CN=*.home.keithjackson.dev` with SANs `*.home.keithjackson.dev, home.keithjackson.dev`
+   — and `Certificate gateway/wildcard-home` is `Ready=True` for exactly those names. So
+   the certificate that *should* be served is fine, and what the NODE reaches is not what
+   the workstation reaches. **Correcting the digest will not clear this.**
+2. **Anonymous pulls from this registry are refused.** Not inferred from a bare 401 — that
+   would have been wrong, because this Gitea answers 401 for *everything* anonymously:
+   `/v2/home-network/agent-runner/manifests/latest`, `/v2/home-network/conformance-runner/…`,
+   a randomly-named nonexistent repository, and `nosuchowner/nosuchimage` all return 401,
+   and `/api/v1/packages/Home-Network` returns `{"message":"token is required"}`. The
+   registry *does* issue a token to an anonymous client, but its `access` claim is `null` —
+   no pull scope. So the conclusion that holds is the simple one: **an unauthenticated
+   client gets nothing from this registry**, so a pull with no credential cannot succeed.
+   And `grep` over the tree finds **no `imagePullSecrets` anywhere** — not in
+   `platform/pm-agent/deployment.yaml`, not in `infra/agent/worker-job-template.yaml`, not
+   in `conformance/incluster/`.
+
+## What I did NOT verify
+
+- **Why the node sees a nameless certificate.** I measured that it does, and that the LAN
+  does not. I did not diagnose it: I did not read the nodes' resolver or
+  `/etc/rancher/k3s/registries.yaml` (node files, not reachable read-only through the API),
+  and I did not check whether the node resolves the name to the same `192.168.2.20` the
+  workstation does or to something else.
+
+  **A correction to a remark I first wrote here:** I cited
+  `cluster-vars`'s `GATEWAY_VIP: 192.168.1.53` as suspicious next to the nodes'
+  `192.168.2.x`. That was noise — the operator confirms those base `cluster-vars` values are
+  **dev-era leftovers for a cluster that is decommissioned**, so the 192.168.1.x addresses in
+  that file say nothing about prod and should not be read as evidence about anything. The
+  measured facts stand on their own and none of them depended on that knob.
+- **Whether the package would be pullable once authenticated.** Nothing has ever been
+  pushed to that path, so "a credential is sufficient" is untested. The only thing
+  established is that no credential is insufficient.
+- **Which fix the operator wants.** Two routes, and they are not equivalent:
+  (a) an `imagePullSecret` — a `dockerconfigjson` holding a Gitea token, SOPS-encrypted
+  like `pm-agent-credentials`, referenced from the Deployment *and* from the committed
+  worker Job template; note the Job template's shape is pinned by admission, and
+  `imagePullSecrets` is a field that policy does not currently constrain, so adding one is
+  a template change that needs a deliberate look at whether the policy should pin it too.
+  (b) allowing anonymous reads of that package in Gitea — no manifest change at all, but it
+  makes the image world-readable to anything that can reach the host.
+  I have implemented neither: both need an operator action I must not take, and (b) is a
+  posture decision. The docs now present both.
+- **Everything the #57 entry listed as unverified about RUNTIME remains unverified.** The
+  image has still never been built or pushed. No dispatcher has authenticated to Gitea, no
+  issue has been triaged, no worker Job has been created — so the admission policy, though
+  now provably applied and Enforce, has still never refused or admitted a real Job. The
+  network policies have not carried traffic.
+- **I did not re-run the merge gate against `main` after the merge.** This branch's own gate
+  run is the evidence for this change; the merged state's is CI run on PR #57.
@@ -0,0 +1,225 @@
+---
+date: 2026-10-05
+branch: feat/vpn-remote-access-wireguard
+title: Remote-access VPN — WireGuard on udp/51820, hostNetwork because a pod identity would 403 every Gateway hostname
+---
+
+## What changed
+
+New platform component `platform/vpn-ingress/`: a **WireGuard** remote-access VPN so the operator's
+Android / Linux / Windows / macOS devices can dial in from anywhere on the internet and behave like
+machines on the LAN — full reach to `192.168.2.0/24` plus internet egress out the house WAN.
+
+This is the **opposite direction** to the existing `platform/vpn-egress` (pods *out* through PIA,
+ADR-0015). They share nothing but the word "VPN"; both READMEs now say so, and `README.md`'s layout
+block labels the two.
+
+**Transport: WireGuard, and the security argument is the handshake's failure mode, not "it is
+encrypted".** WireGuard's first handshake message carries a MAC keyed with the responder's own
+public key, so a sender that does not already know it gets **no reply at all** — no error, no reset,
+no banner. From the internet, udp/51820 is indistinguishable from a closed port: nothing to
+brute-force, no version string, no amplification. That is what makes an unfiltered WAN port
+defensible here, and it is why there is deliberately no `loadBalancerSourceRanges`-style allowlist
+(which would also break roaming clients). It also has first-party clients on all four named
+platforms, which OpenVPN (needs a CA + per-device certs + a CRL) and IKEv2 do not.
+
+**`hostNetwork: true`, and this is THE decision — forced by a measured property of this cluster.**
+A pod-networked WireGuard server must SNAT client traffic to its own pod IP (Cilium drops a packet
+whose source is not the endpoint's address), so every remote client would have arrived wearing *that
+pod's* security identity. `decisions/2026-10-04-plex-advertise-plexdirect.md` measured what that
+costs: a request to the shared Gateway VIP **from inside a pod returns `403 Access denied` from
+Envoy for all 16 Gateway hostnames**, because Cilium's Gateway preserves the original source
+identity and enforces the *destination's* ingress policy, and every app admits `reserved:ingress`
+plus named peers — never an arbitrary pod. So the obvious build would have produced a tunnel that
+came up healthy, showed connected peers, routed packets, and 403'd every cluster web UI — and
+`*.home.keithjackson.dev` would not even have resolved, because `apps/wave-0/pihole-dns.yaml`'s
+ingress policy deliberately omits the `cluster` entity. In the host netns there is no pod identity
+to carry: forwarded traffic is SNATed to the node address and arrives as `host`/`remote-node`,
+byte-for-byte what a LAN client looks like. Three further problems vanish with it: `ip_forward` is
+already 1 on these nodes (so no `--allowed-unsafe-sysctls` kubelet change — it is *not* a safe
+sysctl); no LoadBalancer VIP, so no L2-announcement lease lottery and no `externalTrafficPolicy`
+trade-off; and no double encapsulation, which is what makes `MTU = 1420` simply correct.
+
+`hostNetwork` is permitted by `restrict-host-namespaces`' own stated carve-out (it matches
+`app-namespace=true` only, and names Cilium/node-exporter as the precedent); `namespace.yaml` is
+deliberately unlabelled. **The cost is stated, not buried:** a hostNetwork pod has no Cilium
+endpoint, so **no NetworkPolicy constrains this workload**. `networkpolicy.yaml` says that at
+length rather than shipping an `allow world → 51820` rule that would read as the control and
+enforce nothing; the real boundary is WireGuard's peer authentication.
+
+**A DaemonSet, not a Deployment.** The WAN forward names one node address by hand, off-repo (same
+shape as the plex tcp/32400 forward). A floating single replica would silently invalidate it on
+every reschedule; an identical listener on all three nodes makes **failover a one-line router
+change** with no cluster work and no re-issued client profiles. A pinned LoadBalancer VIP was the
+considered alternative and was rejected: it reintroduces the L2 lease, SNAT and an extra node hop
+into the one path whose failure mode is "I am away from home and cannot get in".
+
+**Authorisation is split so that it stays reviewable.** Peer **public** keys live in
+`platform/vpn-ingress/peers.yaml` in **plaintext** — a public key grants nothing by itself, and this
+makes "who can get into my house" a PR diff with `git log` as its audit trail. The only real secret,
+the server's private key, is the `wg-server-key` Secret, **created out of band by the operator**: an
+agent must not mint a long-lived private key (CLAUDE.md §6), and a key that passed through a session
+transcript would have to be treated as compromised. The two halves are joined only at pod start, by
+an init container, into a `medium: Memory` emptyDir — so the assembled config holding the key never
+touches a node's disk and dies with the pod.
+
+**There are no peers yet, and that is the correct initial state**, for the same reason. The VPN ships
+INERT-BUT-HEALTHY: a zero-peer interface listens and refuses every handshake.
+
+Files:
+
+- `platform/vpn-ingress/` (new): `namespace.yaml`, `peers.yaml` (the plaintext peer register),
+  `daemonset.yaml` (hostNetwork listener + config assembly), `networkpolicy.yaml` (namespace
+  baseline, with the honest caveat), `kustomization.yaml`, `README.md` (the design record).
+- `clusters/base/vpn-ingress.yaml` (new): its own **non-gating post-platform** Flux Kustomization
+  (`dependsOn platform-config`, `wait:false`). Non-gating is load-bearing rather than conventional
+  here: the DaemonSet *cannot* start until the operator creates the server key, so in the gating
+  `platform` tier an unfinished manual step would have stalled every apps wave on merge.
+- `clusters/base/kustomization.yaml`: the new tier added.
+- `clusters/base/cluster-vars.yaml`: new `WG_CLIENT_CIDR` (`10.90.0.0/24`), declared next to
+  `LAN_CIDR` because it is the one range that must be collision-checked against every other; the
+  comment enumerates the five it avoids. **No prod override, deliberately** — unlike every VIP, this
+  range is private to the tunnel, so the same value is correct in both environments and a prod patch
+  would imply otherwise. Substitution inventory updated.
+- `infra/ansible/roles/node_baseline/defaults/main.yml`: `wireguard` added to
+  `node_baseline_kernel_modules`. The pod has `NET_ADMIN` but deliberately **not** `SYS_MODULE`, so
+  it cannot autoload the module — it CrashLoops with a clear error rather than quietly degrading to
+  userspace wireguard-go (which would need `/dev/net/tun`, a device a hostPath mount cannot actually
+  grant, as the `/dev/dri` attempt proved).
+- `infra/vpn-ingress/new-peer.sh` (new): enrols a device. Generates the keypair on the operator's
+  machine, writes a 0600 profile **outside** the checkout (it refuses to write into the repo),
+  prints a QR code for phones, and prints only the public `[Peer]` stanza. It also refuses a
+  duplicate address, because two devices on one address does not error anywhere — the server routes
+  to whichever handshook last, so both appear to work intermittently.
+- `runbooks/vpn-remote-access.md` (new) + its `kustomization.yaml` generator entry + `README.md`
+  index line: the three manual steps, the four off-LAN verification checks, revocation, and why no
+  connection alert exists.
+- `README.md`: `vpn-ingress` added to the layout, with the egress/ingress distinction spelled out.
+
+**THREE MANUAL STEPS REMAIN AND THE VPN DOES NOT WORK UNTIL ALL THREE ARE DONE** (all off-repo by
+necessity; `runbooks/vpn-remote-access.md`): run `node_baseline` to load the kernel module, create
+the `wg-server-key` Secret, and forward WAN udp/51820 to one node address on the SOHO router.
+
+**SENSITIVE PATHS — this PR touches `clusters/**` (three files), so `ci/approval-policy.sh` will
+BLOCK it.** It needs the operator's `/approve-override <reason>` posted as a PR **review** of type
+"Comment". I have deliberately not posted it: CLAUDE.md §1 forbids an agent clearing this on its own
+PR, and the agent account holds `owner`, so the prohibition is a rule, not a limit.
+
+## What I verified
+
+Live prod, read-only, 2026-10-05, plus the offline gate.
+
+- **Toolbox gate** (`./infra/devcontainer/dev.sh run bash -c './ci/gate.sh'`): **rc 3**, with
+  `spec-immutability`, `decisions-log`, `lint`, `l0`, `render-golden`, `l1` and `approval-policy` all
+  **pass**. The rc 3 is two environmental skips — `gitea-settings` (no local `SETTINGS_API_TOKEN`)
+  and `conformance` L2/L3 (`CLUSTER_AVAILABLE` unset). **Not green. Reported as rc 3, not as pass.**
+  Run from an isolated git worktree with both CLAUDE.md §3 workarounds applied
+  (`DEV_KUBECONFIG=/dev/null` plus an `ENGINE` shim bind-mounting the main checkout's `.git` and
+  the sibling spec repo) — which is why `spec-immutability` is **green here and skipped in CI**,
+  where the runner has no spec checkout. `approval-policy` passing locally is an offline N/A, not a
+  verdict; the real verdict is the CI run below.
+- **The CI gate ran on PR #55 (run 244, head `1a67fc1b`) and `approval-policy` is the ONLY failing
+  stage** — read from the job log, not from the red tick. Verbatim: "This PR changes the pipeline or
+  the security posture it rests on, and has NO approving review from anyone other than its author
+  ('gitea-admin')", naming exactly the three files I predicted:
+  `clusters/base/cluster-vars.yaml`, `clusters/base/kustomization.yaml`,
+  `clusters/base/vpn-ingress.yaml`. Every other stage that ran reported green —
+  `gitea-settings`, `decisions-log`, `lint`, `l0`, `render-golden`, `l1`. So the branch is blocked
+  on the operator's `/approve-override <reason>` (posted as a PR **review** of type "Comment") and
+  on nothing else. **I have not posted it** — CLAUDE.md §1.
+- **Branch protection is live, measured by CI's own `gitea-settings` stage** (it has the token this
+  workstation lacks): `required_approvals = 0`, `enable_status_check = true`,
+  `status_check_contexts = ["gate / gate (pull_request)"]`, `block_admin_merge_override = true`,
+  `enable_push = false`, `dismiss_stale_approvals = true`, and **1 runner online**. That is the §2b
+  re-measurement of CLAUDE.md §2's table for this branch, not a restatement of it.
+- **`flux-postbuild-substitution` (L0) actually exercised the new wiring, and caught a real defect
+  in it.** On the first run it FAILED, naming `platform/vpn-ingress/daemonset.yaml:118` and
+  attributing it to "Flux Kustomization 'vpn-ingress' (clusters/base/vpn-ingress.yaml, path
+  ./platform/vpn-ingress)". Two things are proven by that message: the new tier's
+  `postBuild.substituteFrom` declaration is correctly detected (so `${WG_CLIENT_CIDR}` will be
+  substituted, not shipped literally), and the check reads comments as well as values — the hazard
+  was a comment that spelled out the forbidden braced form literally while claiming not to use it.
+  Fixed; the check now passes 444/444 with 0 hazards.
+- **The `wireguard` kernel module is available on these nodes by construction**: all three run
+  Debian 13 (trixie) on kernel `7.1.8+deb13-amd64` (measured), and WireGuard has been in-tree since
+  5.6, so it is present in the distro kernel and only needs loading.
+- **`net.ipv4.ip_forward = 1` is already written by `node_baseline`**
+  (`roles/node_baseline/tasks/main.yml`, `/etc/sysctl.d/99-k3s-cilium.conf`), and **no kubelet
+  carries `--allowed-unsafe-sysctls`** (grepped across `roles/k3s_server`, `roles/node_baseline` and
+  `group_vars`: zero hits). That pair is what makes the host netns the only option that does not
+  require a node-restart change.
+- **Cilium's datapath, measured from `cilium-config` rather than from the values file**:
+  `enable-ipv4-masquerade=true`, `enable-bpf-masquerade=true`, `routing-mode=tunnel`,
+  `tunnel-protocol=vxlan`, `ipv4-native-routing-cidr` EMPTY, Cilium `v1.20.1`. The vxlan underlay is
+  where `MTU = 1420` comes from, and the empty native-routing CIDR is why pod→LAN is masqueraded
+  today.
+- **`WG_CLIENT_CIDR` collides with nothing.** Pod CIDR `10.0.0.0/16` (`CLUSTER_POD_CIDR`), service
+  CIDR `10.43.0.0/16` (measured: `kubernetes` Service clusterIP is `10.43.0.1`), the PIA tunnel's
+  `10.72.192.0/18` (`platform/vpn-egress/README.md`), and both LANs `192.168.1.0/24` /
+  `192.168.2.0/24`. `10.90.0.0/24` is outside all five.
+- **The egress-class label matters and is set to `internet`.** Read live:
+  `CiliumEgressGatewayPolicy vpn-egress-steering` selects `podSelector:
+  homelab.keithjackson.dev/egress-class: vpn` with **no namespace scope**, so `vpn` here would have
+  steered every remote client's internet traffic out PIA.
+- **All three nodes are untainted** (`spec.taints: None` on each), so the DaemonSet covers the
+  cluster with no tolerations.
+- **`new-peer.sh` was run end to end** against a throwaway server key in the scratchpad (deleted
+  immediately after; it never existed in the repo). It rendered a correct profile — `Address
+  10.90.0.7/32`, `DNS 192.168.2.23`, `Endpoint wan.home.keithjackson.dev:51820`, `MTU 1420`,
+  `PersistentKeepalive 25`, `AllowedIPs 0.0.0.0/0` — at mode 0600, printed the matching public-key
+  stanza, and both argument-validation paths (missing name, out-of-range octet) refuse correctly.
+  The private key was redacted from every line I displayed.
+- **The endpoint name is resolver-independent, which is the specific trap this avoids.**
+  `wan.${BASE_DOMAIN}` is an unproxied public Cloudflare A record kept current by
+  `platform/externaldns/ddns.yaml` (checked every 5 min), so it resolves from a cellular connection
+  — unlike any name PiHole answers, which a remote client cannot resolve until it is already
+  connected. (This is the `plex.direct` lesson applied.)
+- **Velero does cover this namespace.** `platform/velero/helmrelease.yaml`'s `daily` schedule
+  excludes only `monitoring` and `unifi`, so `vpn-ingress` and the `wg-server-key` Secret are
+  captured off-cluster to R2. Read from the manifest, not from a backup listing.
+
+## What I did NOT verify
+
+- **THE ACTUAL FIX. Nothing in this branch has been proven to carry a single packet.** The
+  DaemonSet has never been reconciled, no `wg0` has ever existed, and no handshake has ever been
+  attempted. Three blockers are off-repo and manual (kernel module, server key, WAN forward), and
+  this branch removes none of them — it only makes them the *only* remaining work.
+- **Outside-in reachability, at all.** This repo has **no off-LAN vantage point**, which is exactly
+  the gap the plex remote-access work hit. Step 6 of the runbook (a phone on cellular) is the only
+  honest test and it has not been run.
+- **The in-pod `iptables` → host-netfilter interaction, which is my biggest single doubt.** Debian 13
+  uses nf_tables; the container writes MASQUERADE/FORWARD rules into the **host's** tables via the
+  image's own `iptables`. If that binary is the legacy backend while the host is nft, the rules can
+  apply to a table the kernel does not consult — and the symptom would be the nastiest available:
+  handshakes succeed, `wg show` looks perfect, and every forwarded connection hangs. **Check this
+  first if the tunnel comes up but nothing is reachable:** `iptables-save -t nat | grep MASQUERADE`
+  and `nft list table ip nat` on the node, from the host, not from the pod.
+- **Whether `allowPrivilegeEscalation: false` is compatible with the image's s6 init.** It is the
+  correct posture and I set it, but this repo has already been bitten by `no-new-privileges`
+  misbehaving (`platform/externaldns/ddns.yaml`'s README note). If the pod fails before
+  `wg-quick` runs, that flag is the first thing to try flipping.
+- **Whether `NET_ADMIN` alone is sufficient.** Reasoned from what `wg-quick` does (create the link,
+  set a sysctl, write two netfilter rules), not measured. If `iptables` complains, `NET_RAW` is the
+  likely addition — deliberately not granted pre-emptively.
+- **The image's custom-config path.** `lscr.io/linuxserver/wireguard:1.0.20260223-r0-ls124` (tag
+  confirmed to exist and to be the current one, published 2026-10-01) is expected to bring up
+  whatever is in `/config/wg_confs/` when `PEERS` is unset. That is its documented behaviour; it has
+  not been run here, and the init container's assembly of that file has never executed.
+- **Whether the probe is right.** `wg show wg0` is asserted to exit non-zero when the interface is
+  absent. Not executed.
+- **Cilium's reaction to a new `wg0` in the host netns.** `platform/cilium/values.yaml` does not pin
+  `devices`, so Cilium auto-detects; whether it attaches to `wg0` — and whether that matters — is
+  unknown. `wg` interfaces are already filtered out by `node_health_collect.py`, so something in
+  the estate anticipates them, but that is not evidence about Cilium.
+- **Zero peers means the end-to-end authorisation path is untested**, including revocation. The
+  first enrolment is also the first test of `peers.yaml`'s format being what `wg-quick` accepts.
+- **No peer-level observability exists.** An exporter publishing
+  `wireguard_latest_handshake_seconds` is the top follow-up; until then "who is connected" is an
+  on-demand `wg show` and nothing alerts on an unexpected session. Pod-down is covered only by
+  kube-prometheus-stack's generic `KubePodNotReady` / `KubeDeploymentReplicasMismatch`, which I did
+  not confirm fire for a DaemonSet in this namespace.
+- **The security consequence I am most keen for a human to review rather than take from me:** an
+  enrolled device reaches the three k3s nodes themselves — apiserver 6443, kubelet 10250, SSH 22 —
+  because "reach the entire local network" includes them. That is stated in the README and the
+  runbook with the narrowing recipe, but it is a posture decision, not a verified fact, and it is
+  the right thing to argue about on this PR.
@@ -0,0 +1,112 @@
+---
+date: 2026-10-05
+branch: fix/vpn-runbook-ansible-command
+title: vpn-remote-access runbook — step 1 named a script that does not exist, and step 2 cited the wrong reason the key is gitignored
+---
+
+## What changed
+
+Two defects in `runbooks/vpn-remote-access.md` (merged in #55), both authored by me, both reported
+by the operator the first time they tried to follow it.
+
+**1. Step 1 named a command that does not exist.** It said:
+
+    cd infra/ansible && ./site.sh --tags system --limit k3s_prod
+
+There is **no `site.sh` anywhere in this repo** (`find . -name site.sh` → nothing). The invocation
+was wrong in four separate ways at once, which is what makes it worth recording rather than just
+patching: wrong kind of thing (this repo drives Ansible with `ansible-playbook <playbook>`, never a
+wrapper script — `playbooks/site.yml` exists and is the full bring-up chain, not this); wrong
+playbook (the module work lives in `playbooks/node-baseline.yml`); wrong targeting flag (`--limit`
+instead of this repo's `-e k3s_hosts=...` convention, which `infra/ansible/README.md` "Targeting
+prod" documents for every playbook); and no toolbox wrapper, though Ansible exists only inside the
+pinned container and `ansible.cfg` is only read from `infra/ansible`.
+
+Replaced with the real command, plus the three things about it that are load-bearing:
+
+    ./infra/devcontainer/dev.sh run bash -c \
+      'cd /work/infra/ansible && ansible-playbook playbooks/node-baseline.yml -e k3s_hosts=k3s_prod --tags system'
+
+- `-e k3s_hosts=k3s_prod` — the playbook defaults to `k3s_servers`, which is the **dev** group;
+  dev is decommissioned, so an unqualified run does nothing useful.
+- `--tags system`, never untagged — the two kernel-module tasks carry that tag, and an untagged run
+  would also hit the `disks` tasks, which assert on block-device variables prod deliberately leaves
+  as placeholders (the playbook's own header warns about this). `--tags system` is broader than the
+  modules alone (sysctls, iscsid, qemu-guest-agent, swap masking) but each is idempotent and
+  already in its desired state on a live node.
+
+**2. Step 2 gave the wrong reason the server key is safe from git — and the right reason is
+fragile.** It told the operator to stage the key at `/work/.cache/server.key` "inside the repo's
+gitignored cache". `.cache/` is **not** gitignored: `git check-ignore -v .cache/serverkey.txt`
+matches nothing. The file was ignored only incidentally, by `.gitignore` line 11 `*.key` — so the
+path happened to be safe for a reason I had not identified, and **any operator who renamed it
+(`server.pem`, `wg-server`, `privatekey`) would have had a committable WireGuard private key sitting
+in the checkout.** The gate would not have caught it either; `no-plaintext-secrets` does not
+recognise a bare WireGuard key.
+
+The step now states the real rule, marks the `.key` suffix as the thing doing the work, and gives
+the operator a verification they can run before trusting it (`git check-ignore -v` must print a
+rule, and `git status --short` must not list the file).
+
+Nothing outside `runbooks/vpn-remote-access.md` changed; no manifest, no behaviour.
+
+## What I verified
+
+- **`site.sh` does not exist**: `find . -name 'site.sh' -not -path './.git/*'` → no output.
+- **The real surface**: `infra/ansible/playbooks/` contains `node-baseline.yml` and `site.yml` (and
+  11 others); `node-baseline.yml`'s own header documents both
+  `-e k3s_hosts=k3s_prod` and the tag-scoping hazard. The `-e <playbook>_hosts=` convention is
+  confirmed by `infra/ansible/README.md` §"Targeting prod" and by the existing
+  `runbooks/node-memory-swap.md`, which invokes `ansible-playbook playbooks/node-health.yml -e
+  node_health_hosts=...`.
+- **`k3s_prod` is a real inventory group**: `[k3s_prod:children]` in `inventory/hosts.ini`, with
+  `[k3s_prod_primary]`/`[k3s_prod_secondary]`.
+- **`--tags system` covers the kernel-module tasks**: both "Persist kernel modules…" and "Load
+  kernel modules now" carry `tags: [system]` in `roles/node_baseline/tasks/main.yml`.
+- **The gitignore claim, measured both directions**:
+  `git check-ignore -v .cache/server.key` → `.gitignore:11:*.key`;
+  `git check-ignore -v .cache/serverkey.txt` → no match. So the suffix is the only thing ignoring it.
+- **Every path the component's docs reference resolves**: all six relative markdown links in
+  `platform/vpn-ingress/README.md` (checked from that file's own directory), and both Ansible
+  playbook paths.
+- **Toolbox gate** from an isolated worktree: **rc 3**, with `spec-immutability`, `decisions-log`,
+  `lint`, `l0`, `render-golden`, `l1` and `approval-policy` all **pass**; the rc 3 is the two
+  environmental skips (`gitea-settings` — no local token; conformance L2/L3 — no `CLUSTER_AVAILABLE`).
+  **Not green. Reported as rc 3, not as pass.**
+- **This branch touches NO sensitive path** (`runbooks/**` and `decisions/**` are not in
+  `infra/gitea/approval-policy.json`), so unlike #55 it needs no `/approve-override`.
+
+## What I did NOT verify
+
+- **The corrected command has not been RUN.** Ansible is an operator action, and this is the
+  decisive gap: I have verified the playbook, the group, the tag and the flag all exist and are
+  the documented convention, but not that the run succeeds end to end or that
+  `lsmod | grep '^wireguard'` then reports the module. It is a better-evidenced command, not a
+  proven one.
+- **Whether `--tags system` is entirely side-effect-free on a live prod node.** Each task it runs is
+  idempotent by construction, but I did not dry-run it (`--check`) to confirm it reports zero
+  changes beyond the module load.
+- **The rest of the runbook's commands past step 2** are unchanged and still unexercised — in
+  particular `kubectl exec ds/wireguard -- wg show`, which cannot be reached while the pods sit in
+  `Init` waiting on the server key.
+- **Whether any OTHER document I wrote in #55 contains an invented command.** I re-checked every
+  file path and markdown link in the component (all resolve) and every script the docs tell an
+  operator to run, but "the referenced file exists" is weaker than "the command is correct" — which
+  is exactly the gap that produced `site.sh`.
+
+## Post-merge state of #55, recorded here since its own entry predates the merge
+
+Measured on live prod after #55 merged as `ad3f56e`:
+
+- Flux applied it by the real path: Kustomization `vpn-ingress` `lastAppliedRevision:
+  main@sha1:ad3f56e`, equal to the GitRepository's artifact revision, `Ready=True`.
+- All **18** Flux Kustomizations `Ready=True` — the new tier disturbed nothing, and `wait: false`
+  behaved as intended (`vpn-ingress` is Ready while its own pods are not, so nothing downstream
+  stalled on it).
+- **`hostNetwork` is confirmed in effect, not merely configured**: the three pods report pod IPs
+  `192.168.2.10/.11/.12` — the node addresses, one per node.
+- **It fails closed exactly as designed**, with a legible cause: all three pods `Init:0/1`,
+  `MountVolume.SetUp failed for volume "wg-server-key" : secret "wg-server-key" not found`, and no
+  Secret in the namespace. The #55 entry's "the DaemonSet has never been reconciled" is superseded
+  by this paragraph; its remaining unverified claims (the tunnel carrying a packet, the
+  iptables/nftables backend question) still stand.
@@ -0,0 +1,187 @@
+---
+date: 2026-10-05
+branch: fix/vpn-server-key-in-sops
+title: VPN server key moves into SOPS-encrypted git — the out-of-band Secret broke R-SEC-01 and the DR story
+---
+
+## What changed
+
+**Operator correction (2026-10-05): "secrets are kept in source through sops".** They are right, and
+#55 shipped the WireGuard server private key the wrong way: as a Secret the operator was told to
+`kubectl create` out of band, referenced by name only. This branch moves it into the tree as
+`platform/vpn-ingress/wg-server-key.sops.yaml`, where every other secret in this repo lives.
+
+**Why the original choice was wrong, not merely unconventional.** Two concrete costs, both of which
+#55's own README half-admitted and then shipped anyway:
+
+1. **R-SEC-01 / spec docs/07 says secrets live in source, SOPS-encrypted, reaching the cluster only
+   through Flux.** An out-of-band Secret is outside the GitOps tree by construction.
+2. **It broke DR for the one credential that cannot be re-derived.** A cluster rebuild restores
+   everything in git; it does not restore a hand-made Secret. Losing this key means **re-enrolling
+   every device**, because each client profile pins its public half. #55 papered over this with
+   "keep a copy in your password manager", which is a workaround for a self-inflicted gap.
+
+Note `platform/kyverno/admission/secret-provenance.yaml` did **not** forbid the original shape —
+it scopes to `app-namespace=true` namespaces and `vpn-ingress` is deliberately a platform namespace,
+so admission would have accepted the hand-applied Secret. The rule it violated was the written
+requirement, not an enforced control. Recording that because "the gate let it through" was never
+evidence it was correct.
+
+**How the unfillable-key problem is solved.** An agent still must not mint a long-lived private key
+(CLAUDE.md §6), so the file is committed **already encrypted, with `privatekey: REPLACE-ME`**. That
+makes the wiring complete and the gate green from the first commit — the resource line and both
+overlay decryption patches are present — and leaves the operator exactly one act: replace the value.
+The alternative, a commented-out resource line to uncomment later, is precisely the "file in git with
+no generator entry: reviewed, merged, apparently done, still broken" shape this repo keeps getting
+bitten by (`alert-runbooks-resolvable` exists because of it).
+
+**The init-container guard is now a validation, not an emptiness check.** It was `[ -z "$key" ]`.
+Because the committed placeholder is non-empty, the likely failure is now a value that is present
+and *wrong*, so the guard pipes the value through `wg pubkey` — which accepts only a real 32-byte
+curve25519 private key — and names which of four cases it hit:
+
+| case | why it matters |
+|---|---|
+| `REPLACE-ME` placeholder | the expected fresh-install state |
+| empty | blanked value |
+| **starts with `ENC[`** | **the Secret reached the cluster UNDECRYPTED.** A missing overlay decryption patch applies cleanly and leaves every Flux condition green — this is the silent failure the guard exists for |
+| rejected, none of the above | mangled value, or a *public* key pasted by mistake |
+
+Files:
+
+- `platform/vpn-ingress/wg-server-key.sops.yaml` (new) — SOPS-encrypted to the repo's age recipient,
+  `stringData.privatekey` only, placeholder value.
+- `platform/vpn-ingress/wg-server-key.sops.yaml.example` (new) — plaintext template + operator
+  hand-off, following the `crafty-oauth2-proxy-credentials.sops.yaml.example` convention.
+- `platform/vpn-ingress/kustomization.yaml` — the resource added; the "DELIBERATELY ABSENT: a
+  Secret" block replaced with the overlay-patch warning.
+- `platform/vpn-ingress/daemonset.yaml` — the `wg pubkey` guard; volume comment rewritten.
+- `clusters/dev/kustomization.yaml`, `clusters/prod/kustomization.yaml` — **the `vpn-ingress`
+  `decryption:` patch, in both.** This is the load-bearing half: #55's own kustomization comment
+  predicted that forgetting it applies ciphertext cleanly.
+- `clusters/base/vpn-ingress.yaml` — its "NO decryption stanza is needed" comment was now false.
+- `platform/vpn-ingress/README.md`, `runbooks/vpn-remote-access.md` — step 2 rewritten.
+- `infra/vpn-ingress/new-peer.sh` — stale "step 1" pointer.
+
+**A second finding: `wg` and `sops` were not in the same place — and the first fix for that was
+also wrong.** Measured: `wg` existed only on the host (`/usr/bin/wg`), `sops` only in the dev
+container, `qrencode` on neither. So `sops -d … | wg pubkey` could not run in one shell, and #55's
+step 2 — which assumed it could — would have failed.
+
+My first fix was to **split every step by where it runs**, and to tell the operator to
+`dnf install qrencode` on their workstation. **Operator correction: "sop, wg, and any other tool
+requirement is supposed to be baked into the devcontainer."** That is CLAUDE.md §5 and the
+devcontainer README's "Don't install the toolchain on the host", and the split fix broke the
+invariant rather than honouring it — it also produced a procedure that could never be reproduced in
+CI, and which no one should have to follow.
+
+**The real fix:** `wireguard-tools` and `qrencode` are now distro packages in
+`infra/devcontainer/Containerfile`, alongside ansible/openssh/diffutils. Both are in Fedora 44's
+repos (`wireguard-tools` 1.0.20260223 — the same upstream version as the container image this
+component runs — and `qrencode` 4.1.1), unpinned like every other dnf package there, because the
+pinned thing is the Fedora base and neither is a gate tool whose version changes what green means.
+
+Three things got *simpler* rather than merely relocated, which is the tell that the operator's rule
+was the right one:
+
+1. **Step 2 is now one pipeline in one shell:** `sops set … "\"$(wg genkey)\""` generates the key
+   straight into the already-encrypted document. The plaintext never lands on disk, never reaches a
+   terminal, and there is no staged copy to shred. The previous version needed a copy in
+   `.cache/server.key`, a `git check-ignore` warning about the `*.key` suffix being the only thing
+   protecting it, and a sha256 comparison to prove the right bytes arrived. All of that is gone.
+2. **`new-peer.sh` now derives the server's public key from `wg-server-key.sops.yaml` itself**
+   (`sops -d --extract … | wg pubkey`), so there is no local key copy to keep in step with the
+   encrypted one. It previously required the operator to keep the private key at a magic host path.
+3. **`.cache/` is now gitignored at the repo root** (mirroring `infra/ansible/.gitignore`), so the
+   container has a persistent, non-committable scratch directory. `new-peer.sh` writes client
+   profiles to `.cache/wg-peers/` by default — necessary because the repo bind-mount is the
+   container's ONLY persistent read-write mount, so a profile written to `/tmp` in there is gone
+   before it can be moved to a desktop. Its old blanket "refuse to write inside the checkout" guard
+   is replaced by `git check-ignore`, which tests the actual property instead of a proxy.
+
+**SENSITIVE PATHS — this PR touches `clusters/**` (two overlays) AND adds a `**/*.sops.yaml`, so
+`ci/approval-policy.sh` will BLOCK it.** It needs the operator's `/approve-override <reason>` as a
+PR **review** of type "Comment". I have deliberately not posted it (CLAUDE.md §1).
+
+## What I verified
+
+- **The encrypted file is real and correctly targeted.** `sops -e -i` in the pinned toolbox
+  produced `stringData.privatekey: ENC[AES256_GCM,...]` with cleartext keys, `encrypted_regex
+  ^(data|stringData)$`, and exactly one age recipient:
+  `age175l8mdpdfu7hq0aml3exs3gykarwjmuvr23sq56s3wjejnyk44wsp4mfzg` — the recipient in the root
+  `.sops.yaml`, i.e. the key Flux holds as `sops-age`.
+- **Round-trip, without exposing anything**: `sops -d` then a Python read of key names only →
+  `stringData keys: ['privatekey']`, and `value is still the placeholder: True`.
+- **Both overlay patches are present and name the right Kustomization** (`name: vpn-ingress`,
+  `namespace: flux-system`, `decryption.secretRef.name: sops-age`), inserted after each overlay's
+  `velero` stanza, mirroring headlamp/crafty/velero.
+- **`kubectl kustomize platform/vpn-ingress` builds** and now emits five objects — Namespace,
+  ConfigMap, **Secret**, DaemonSet, NetworkPolicy — with `${WG_CLIENT_CIDR}` still an unexpanded
+  token for Flux.
+- **The tool gap, measured on both host and container before the fix**: `wg` host-only, `sops`
+  container-only, `qrencode` on neither.
+- **Both packages exist in the image's repos**, queried from inside the running container:
+  `wireguard-tools` 1.0.20260223 (repo `updates`) and `qrencode` 4.1.1 (repo `fedora`).
+- **The image REBUILDS with them and both tools resolve inside it** —
+  `./infra/devcontainer/dev.sh build` succeeded, and `wg --version` / `qrencode --version` /
+  `sops --version` all answer in the rebuilt container. This is the claim the change rests on, so
+  it was executed rather than reasoned.
+- **`new-peer.sh`'s new SOPS path fails correctly against the placeholder.** Run in the rebuilt
+  container it refused with "could not derive the server public key … it still holds the REPLACE-ME
+  placeholder", which is both the expected pre-key behaviour and a live test of the
+  `sops -d | wg pubkey` pipeline the whole design now depends on.
+- **`.cache/` is ignored regardless of filename** now: `git check-ignore -v .cache/anything.conf`
+  and `.cache/serverkey.txt` both match `.gitignore:46:.cache/`. Before this change only `*.key`
+  matched, which is the fragility the previous runbook had to warn about.
+- **Toolbox gate** from an isolated worktree: **rc 3**, with `spec-immutability`, `decisions-log`,
+  `lint`, `l0`, `render-golden`, `l1` and `approval-policy` all **pass**; rc 3 is the two
+  environmental skips (`gitea-settings` — no local token; conformance L2/L3 — no cluster).
+  **Not green. Reported as rc 3, not as pass.**
+- **The L0 gate caught THREE real defects in this branch before it could merge — including one
+  in the fix for another — and I had asserted one of them was fine without running it.** Both are recorded because the gate's value here is the
+  whole point of the exercise:
+  1. **`no-plaintext-secrets` FAILED**: "`wg-server-key.sops.yaml.example`: an unencrypted .example
+     template is referenced by a kustomization — it would be applied as a plaintext Secret". My
+     kustomization named the template in a *comment*, and the check matches comments too (correctly:
+     naming one is how a plaintext Secret gets applied by accident). `platform/crafty/kustomization.yaml`
+     never names its own example either — the convention was there to copy and I missed it. Fixed by
+     not naming the file; the hand-off lives inside the example, where it belongs.
+     **An earlier draft of this entry claimed this check passed. It did not. The claim was written
+     from expectation rather than from a run.**
+  2. **`flux-postbuild-substitution` FAILED** on `${key#ENC[}` in my new guard
+     (`daemonset.yaml:155`), flagged `[SILENT-EMPTY]`: envsubst consumes every `${...}`, so my
+     shell prefix-strip would have rendered to the empty string — the ciphertext branch of the guard
+     would never have fired, which is precisely the silent failure the guard was added to catch.
+     Rewritten with `case`, which uses no braces and so has nothing to escape.
+  3. **And then it failed a THIRD time, on the fix's own comment** — `[FATAL-PARSE]
+     daemonset.yaml:156 ${...}`, the prose explaining the rule, written with the literal form. That
+     class is worse than it looks: a `FATAL-PARSE` hazard fails the **entire** Kustomization, every
+     resource in the path, not just the line. Rewritten as "dollar-brace expansion". This is the
+     second time in this component that writing the hazard literally inside a comment about the
+     hazard has been the defect (the first was in #55), so the habit to build is: **in any
+     substituted path, describe the construct in words, never type it.**
+- **After both fixes, `no-plaintext-secrets` and `flux-postbuild-substitution` pass** (446 and 198
+  assertions respectively), and `l0` is green.
+
+## What I did NOT verify
+
+- **That Flux decrypts this file on prod.** The overlay patches have never reconciled. This is the
+  whole risk of the change and it has exactly one observable outcome: after merge the pods should
+  CrashLoop reporting the **`REPLACE-ME` placeholder** (proving decryption worked), *not* reporting
+  **`ENC[`** (which would prove a patch is wrong). I built the guard to tell those apart because I
+  cannot test them.
+- **That `wg pubkey` accepts the operator's real key through this path.** The guard is reasoned from
+  `wg pubkey`'s behaviour and has never run — `wg` is absent from both this workstation's container
+  and the gate, so the first execution will be in the pod.
+- **The `sops set` command in the hand-off.** I verified `sops -e -i` and `sops -d` in the toolbox;
+  I did **not** run `sops set` with the quoting shown, and nested quoting inside
+  `dev.sh run bash -c` is exactly where a documented command tends to break. If it misbehaves, the
+  editor form (`sops <file>`) is the fallback and does not depend on quoting.
+- **The sha256 comparison in step 2 step 4** is untested end to end (it needs the real key).
+- **Whether anything else in #55 assumed a tool is available where it is not.** I checked `wg`,
+  `sops` and `qrencode` because step 2 depended on them. I did not audit every command in the
+  runbook the same way — and that class of defect has now produced two corrections in a row
+  (`site.sh`, then `sops | wg`), so assume more remain until each step has actually been run.
+- **The live VPN still carries no traffic**, and the earlier gaps stand unchanged: the
+  iptables-vs-nftables question, `allowPrivilegeEscalation: false` versus the image's s6 init, and
+  any off-LAN reachability.
@@ -0,0 +1,73 @@
+---
+date: 2026-10-06
+branch: fix/new-peer-ignores-template-comments
+title: new-peer.sh refused the first VPN address because its duplicate check matched its own commented-out example
+---
+
+## What changed
+
+The operator's first real enrolment failed:
+
+```
+$ ./infra/vpn-ingress/new-peer.sh keith-phone 2
+new-peer.sh: 10.90.0.2/32 is already allocated in platform/vpn-ingress/peers.yaml. Pick another octet.
+```
+
+**Nothing was allocated.** `peers.yaml` had zero peers — the pod's own init container reported
+`wg0.conf assembled: 0 peer(s)`. The duplicate-address check grepped the WHOLE file, and
+`peers.yaml` line 66 is a **commented-out example stanza** I wrote, containing literally
+`#   AllowedIPs = 10.90.0.2/32`. So `.2` — the first address anybody would ask for, and the one my
+own runbook uses in its example — was permanently un-allocatable, with a message asserting the
+opposite of the truth.
+
+Both halves fixed, because either alone leaves the trap half-set:
+
+- **`infra/vpn-ingress/new-peer.sh`**: the check strips comment lines before matching
+  (`grep -vE '^[[:space:]]*#' | grep -q …`). That is the correct predicate rather than a patch: a
+  real stanza's `AllowedIPs` line is never commented, while both the template and every peer's
+  `# <name> — <owner>` label always are.
+- **`platform/vpn-ingress/peers.yaml`**: the example now uses placeholders that cannot match
+  anything real — `# <device-name> — <owner>, enrolled <YYYY-MM-DD>` and
+  `AllowedIPs = 10.90.0.<octet>/32`. A future grep cannot be fooled by it either.
+
+The bug class is worth naming: **a documentation example that is byte-identical to real data will
+eventually be parsed as real data.** The same shape caused two earlier defects in this component —
+`flux-postbuild-substitution` flagged a `${...}` written inside a comment *explaining* that hazard,
+and `no-plaintext-secrets` flagged the `.sops.yaml.example` because the kustomization named it in a
+comment. Three instances now; the rule is to make examples structurally unmatchable, not merely
+commented out.
+
+No sensitive paths (`platform/vpn-ingress/**`, `infra/vpn-ingress/**`, `decisions/**`), so this
+merges on a green gate with no override.
+
+## What I verified
+
+Run in the pinned toolbox against the live tree, 2026-10-06.
+
+- **`.2` now works**, and it went through the REAL key path: `new-peer.sh keith-phone 2` rendered a
+  profile with `Address 10.90.0.2/32`, `AllowedIPs = 10.90.0.2/32` in the printed stanza, full
+  tunnel, at `.cache/wg-peers/keith-phone.conf` (0600). The throwaway keypair was deleted after.
+- **This incidentally closes a gap left open in #60**: the profile could only have been rendered by
+  deriving the server's public key via `sops -d --extract … | wg pubkey` from
+  `wg-server-key.sops.yaml` — so that pipeline is now proven **against the operator's real key**,
+  not just against a placeholder it was expected to reject.
+- **A real duplicate is still refused.** Appending an uncommented
+  `AllowedIPs = 10.90.0.5/32` stanza and asking for octet 5 produced the correct refusal; the tree
+  was restored afterwards and `git diff --stat` showed only the intended template edit.
+- **Zero active allocations remain**: `grep -vE '^[[:space:]]*#' peers.yaml | grep -c AllowedIPs`
+  → `0`.
+- **Toolbox gate**: rc 3, with `spec-immutability`, `decisions-log`, `lint`, `l0`, `render-golden`,
+  `l1` and `approval-policy` all pass; rc 3 is the two environmental skips (`gitea-settings`,
+  conformance L2/L3). **Not green. Reported as rc 3.**
+
+## What I did NOT verify
+
+- **No peer is enrolled by this branch.** The keypair I generated was a throwaway and was deleted;
+  the operator must run the script themselves, since the device's private key must exist only on
+  the device. So the end of the enrolment path — a stanza merged into `peers.yaml`, Flux rolling
+  the DaemonSet, and `wg show` listing a peer — is still unexercised.
+- **The duplicate-NAME warning** (`grep -qi "^ *# *${NAME} "`) deliberately still inspects
+  comments, because per-peer labels are comments. It is no longer tripped by the template, but I
+  did not test it against a real enrolled peer.
+- **Nothing about client traffic.** The WAN port-forward is still not configured and there is still
+  no off-LAN vantage point, so the tunnel has carried no packet.
@@ -0,0 +1,103 @@
+---
+date: 2026-10-06
+branch: fix/peers-configmap-content-hash
+title: A merged VPN peer never reached the tunnel — the peer register was a fixed-name ConfigMap, so nothing rolled the pods
+---
+
+## What changed
+
+The operator enrolled a phone, merged the peer, and **`wg show` listed no peers.** Measured on prod
+2026-10-06, with the peer already on `main`:
+
+| observation | value |
+|---|---|
+| peer stanza on `main` | present (`AllowedIPs = 10.90.0.2/32`) |
+| GitRepository artifact | `main@sha1:e1bebb8` — Flux had fetched it |
+| `vpn-ingress` Kustomization `lastAppliedRevision` | `main@sha1:5928d81` — **behind**, 10m interval |
+| live `wg-peers` ConfigMap, active `AllowedIPs` lines | **0** |
+| DaemonSet volume reference | `configMap.name: wg-peers` — a **fixed** name |
+| DaemonSet `generation` / `observedGeneration` | **1 / 1** — it had **never rolled** |
+| init container, all three pods | `wg0.conf assembled: 0 peer(s)` |
+
+The lag was only the reconcile interval. **The defect is the fixed name.** When Flux does update a
+fixed-name ConfigMap it updates it *in place*: the DaemonSet's pod template is byte-identical, so
+no rollout is triggered — and because the init container assembles `wg0.conf` **once at pod start**
+into a tmpfs, the running tunnel keeps the old peer list indefinitely. Adding or revoking a peer
+would have had **no effect at all** until something unrelated happened to restart the pods. For a
+*revocation* that is a security defect, not an inconvenience: the operator would delete a stanza,
+see a green PR, and the device would keep working.
+
+My runbook and README both asserted "PR → merge → Flux rolls the DaemonSet (~1 min)". That was
+never true.
+
+**This repo already documents the fix, and I had read the file.** `runbooks/kustomization.yaml`:
+*"The generated name carries kustomize's content hash, so editing any runbook rolls the server
+automatically and a stale projection is impossible."*
+
+So the register becomes a **content-hashed generator**:
+
+- `platform/vpn-ingress/peers.yaml` (inline ConfigMap) → **`platform/vpn-ingress/peers.conf`**, a
+  plain file, plus a `configMapGenerator` in `kustomization.yaml`. The operator's enrolled peer was
+  carried across verbatim. Every line is WireGuard config and `#` is a legal comment there, so the
+  documentation now travels *inside the mounted file* instead of in a YAML wrapper that gets
+  stripped.
+- **`namespace: vpn-ingress` added to the kustomization — REQUIRED, not tidiness.** A generated
+  ConfigMap inherits no namespace; every other object here declares `vpn-ingress`; and kustomize's
+  `nameReference` transformer will not rewrite a reference across a namespace boundary. Without it
+  the build emitted `ConfigMap wg-peers-m9kcckcb5t` while the DaemonSet still mounted the unhashed
+  `wg-peers`, which would not exist — the pods would wedge on a missing volume. I caught this only
+  by building the output and reading the volumes block.
+- **`infra/vpn-ingress/new-peer.sh`**: `PEERS_FILE` repointed to `peers.conf`, and a missing
+  register is now **fatal** instead of skipped. The old guard was
+  `[ -r "$PEERS_FILE" ] && grep …`, so after the rename the only symptom would have been
+  duplicate-address detection quietly never firing again — the silent-skip shape this repo treats
+  as a defect in its own right.
+- Stale `peers.yaml` references swept from the README, runbook, `daemonset.yaml`,
+  `networkpolicy.yaml`, the SOPS example, and the script's own **user-facing output** (it told the
+  operator to paste into "peers.yaml, under data.peers.conf", which would no longer exist).
+- The runbook gained the verification that actually distinguishes this failure — the DaemonSet's
+  `generation` must *increase* after the merge — and a troubleshooting row for `0 peer(s)` after a
+  merge.
+
+Flux's `prune: true` removes the orphaned fixed-name `wg-peers` ConfigMap on the next reconcile.
+
+No sensitive paths (`platform/vpn-ingress/**`, `infra/vpn-ingress/**`, `runbooks/**`,
+`decisions/**`), so this merges on a green gate with no override.
+
+## What I verified
+
+Built and run in the pinned toolbox, 2026-10-06 (kustomize v5.8.1 via `kubectl kustomize`).
+
+- **The reference is now rewritten end to end**: generated `ConfigMap wg-peers-m9kcckcb5t` in
+  namespace `vpn-ingress`, and the DaemonSet mounts **`wg-peers-m9kcckcb5t`**. Before adding
+  `namespace:` the same build mounted the unhashed `wg-peers` — so the namespace line is load
+  bearing, measured both ways.
+- **The hash tracks content, which is the whole mechanism.** `wg-peers-m9kcckcb5t` →
+  append a second peer → `wg-peers-dgg7ht9c74` → restore → `wg-peers-m9kcckcb5t`. Deterministic
+  and reversible, so an edit necessarily changes the pod template.
+- **The operator's enrolled peer survived the file conversion byte-for-byte**: the active stanza in
+  `peers.conf` (`PublicKey = pBRSHrRy…`, `AllowedIPs = 10.90.0.2/32`) is identical to the one on
+  `main`, compared directly against `git show origin/main:platform/vpn-ingress/peers.yaml`.
+- **The build still emits all five objects**: Namespace, ConfigMap, Secret, DaemonSet,
+  NetworkPolicy — and the `Namespace` object's own name is still `vpn-ingress` (the namespace
+  transformer did not rewrite it).
+- **`new-peer.sh` works against the new register**: `spare-laptop 7` renders a profile and prints
+  "append this to platform/vpn-ingress/peers.conf"; `dupe 2` is **refused** because the operator's
+  real `.2` now occupies it — the first time the duplicate check has been exercised against real
+  data rather than against its own example.
+- **Toolbox gate**: rc 3, with `spec-immutability`, `decisions-log`, `lint`, `l0`, `render-golden`,
+  `l1` and `approval-policy` all pass; rc 3 is the two environmental skips. **Not green. Reported
+  as rc 3.**
+
+## What I did NOT verify
+
+- **That the roll actually happens on the cluster.** The whole point of the change is unproven
+  until Flux applies it: the success criterion is the DaemonSet's `generation` increasing and
+  `wg0.conf assembled: 1 peer(s)` in the init log, followed by `wg show` listing the peer.
+- **That the tunnel then carries traffic.** No handshake has ever been observed. The WAN
+  port-forward is reportedly configured but has never been exercised by a packet I can see, and I
+  have no off-LAN vantage point — runbook step 6 from cellular remains the only honest test.
+- **Revocation**, which is the case where this defect was a security problem. Deleting a stanza
+  should now roll the pods and drop the peer; untested.
+- **Whether the orphaned fixed-name `wg-peers` ConfigMap is actually pruned.** Reasoned from
+  `prune: true` on the Kustomization, not observed.
@@ -0,0 +1,126 @@
+---
+date: 2026-10-06
+branch: docs/pm-agent-registry-pull-prereq
+title: The nodes resolve gitea to the WAN, so the failing certificate is the router's — the second node process to need the issuer pin
+---
+
+## What changed
+
+The image pull for `pm-agent` failed TLS verification, and the previous entry on this branch
+honestly recorded it as **not diagnosed**. The operator asked for the diagnosis before any
+registry design. This is it, and the fix turns out to be a pattern this repository already
+has.
+
+`infra/ansible/inventory/group_vars/k3s_prod/vars.yml` now pins
+`gitea.{{ k3s_base_domain }}` → `192.168.2.20` in `node_baseline_hosts_pins`, beside the
+Keycloak issuer pin that is there for the identical reason.
+
+**It reaches the nodes the way every other node setting in this project does — through
+Ansible, from the inventory.** Node configuration is Ansible's (and, for the dev VMs,
+OpenTofu's); nothing here touches a node by hand. For prod specifically, Ansible is the
+*only* surface: `infra/PROD-PROVISIONING.md` records that prod is 3× bare metal and that the
+dev path (OpenTofu → Proxmox VM → cloud-init) does not apply, so there is no
+cloud-init/tofu half to keep in parity for this. The one scoped, idempotent command:
+
+    cd infra/ansible && ansible-playbook playbooks/node-baseline.yml \
+      -e k3s_hosts=k3s_prod --tags hosts
+
+`--tags hosts` runs ONLY the `/etc/hosts` task, so applying this pin cannot drift any other
+baseline setting. Running the play is an operator action (it has become/root on prod), but
+the configuration itself is declared, reviewed and version-controlled — not typed on a node.
+
+The docs that described this as an undiagnosed blocker now describe the cause and the fix:
+`platform/pm-agent/README.md`, `runbooks/pm-agent.md` (its symptom row now names the pin and
+the play), and `docs/plans/pm-agent-issue-to-pr.md`.
+
+Also recorded, in the two places an operator reads when creating the credential: **the agent
+authenticates to Gitea with a local account and a scoped PAT, by decision** (operator,
+2026-10-06), not with a federated identity. Written down because the alternative looks
+obviously better until you check whether it is possible — see below.
+
+## What I verified
+
+Every step measured, read-only, in this order.
+
+**The failing certificate is the router's, not the Gateway's.**
+
+- containerd's error names TLS, not the digest: `tls: failed to verify certificate: x509:
+  certificate is not valid for any names, but wanted to match gitea.home.keithjackson.dev`.
+  "not valid for **any** names" means the presented certificate carries no SANs at all.
+- `192.168.2.20` is the shared Gateway's own LoadBalancer VIP
+  (`gateway/cilium-gateway-shared`, from the Cilium pool `192.168.2.20-30`), and its `https`
+  listener serves `*.home.keithjackson.dev` with `wildcard-home-tls`. From the operator's
+  workstation the name resolves there and serves the real Let's Encrypt
+  `CN=*.home.keithjackson.dev` with correct SANs. **So the certificate and the Gateway are
+  healthy.**
+- **The node asks a different resolver and gets a different answer.** Prod's
+  `node_baseline_dns_servers` is the LAN gateway, not Pi-hole — deliberately, as that file
+  explains. Public DNS for this zone is a CNAME to `wan.home.keithjackson.dev`: measured via
+  both `1.1.1.1` and `8.8.8.8`, `gitea.home.keithjackson.dev` →
+  `wan.home.keithjackson.dev.` → `136.51.115.252`, and the apex answers the same.
+- **That address serves a certificate with no names.** Measured from the workstation against
+  the WAN address with the right SNI:
+
+      subject=C=ZZ, ST=Somewhere, L=Unknown, O=%D342e7e6b, CN=%D
+      issuer=C=ZZ, ST=Somewhere, L=Unknown, O=%D342e7e6b, CN=%D
+      No extensions in certificate
+
+  No extensions means no `subjectAltName`, which is exactly "not valid for any names". The
+  `CN=%D` is the router's placeholder.
+
+**This repository had already measured the same thing, for Keycloak, and I did not need to
+re-derive it.** `infra/ansible/inventory/group_vars/k3s_prod/vars.yml` says, above the pin:
+"Since platform/gateway/gateway.yaml set an external-dns `target`, every public name is a
+CNAME to wan.home.keithjackson.dev = the home WAN IP. The SOHO router does NOT hairpin: from
+the LAN, WAN:443 answers with the router's own self-signed placeholder cert (measured from
+k3s-prod-2/-3 2026-10-03: `curl` exit 60, ssl_verify_result=18)." Same cause, same symptom,
+one name later. The pin exists precisely for node processes that must reach the Gateway
+directly; containerd is one, and nobody had added it.
+
+**The parity the pin has to satisfy:** `192.168.2.20` equals the live
+`GATEWAY_VIP`, and `k3s_base_domain` equals the live `BASE_DOMAIN` — both read from the
+cluster, not from the comment that claims prod serves `prod.home.keithjackson.dev` (it does
+not; `flux-system/cluster-vars` reports `BASE_DOMAIN=home.keithjackson.dev` and
+`GATEWAY_VIP=192.168.2.20`, and Ansible's `k3s_base_domain` is `home.keithjackson.dev`).
+That comment is stale history.
+
+**The credential decision, and why the obvious alternative is not available.** Gitea's API
+accepts basic auth, PATs, SSH signatures and its own OAuth2 bearer tokens; as an OAuth2
+provider Gitea implements **only the Authorization Code Grant** (plus PKCE/OIDC), so there
+is no client-credentials grant, and nothing in Gitea validates a token issued by a
+third-party OIDC provider. A Keycloak service-account token therefore cannot authenticate to
+Gitea's API or to git-over-HTTP. Read from Gitea's own documentation
+(`docs.gitea.com/development/api-usage`, `/development/oauth2-provider`), not assumed.
+
+**Gate:** `./ci/gate.sh` in the pinned toolbox from a §0 worktree — see the branch's run; rc 3
+with `gitea-settings` the only stage that did not run.
+
+## What I did NOT verify
+
+- **That the pin fixes the pull.** It is IaC, and nothing has applied it: `/etc/hosts` on the
+  nodes is written by the `node_baseline` play's `hosts`-tagged task, which is an operator
+  action. I did confirm the mechanism is not inert — `roles/node_baseline/tasks/main.yml`
+  renders `node_baseline_hosts_pins` into a marked `blockinfile` with `backup: true`, and
+  `state: absent` when the list empties, so a removed entry really leaves the node. Until that runs
+  and an image exists, "the node now reaches the Gateway" is a design claim. The evidence
+  that it *will* is the Keycloak pin working for the same cause — which I also did not
+  re-measure.
+- **Why public DNS answers at all for an `internal` service.** `catalog/gitea.yaml` sets no
+  `exposure`, so it inherits `internal`, and the renderer contract says an internal service's
+  HTTPRoute carries `external-dns.alpha.kubernetes.io/controller: none` and publishes no
+  public record. Yet `gitea.home.keithjackson.dev` resolves publicly to the WAN CNAME. I did
+  not chase that: it may be a zone-level wildcard rather than a published record, and it did
+  not change the diagnosis. It is worth someone's attention, because "internal services
+  publish no public DNS" is an L0-checked claim and this looks like a case where the *name*
+  resolves regardless of what the renderer withheld.
+- **Registry authentication.** Unchanged and still open: an unauthenticated client gets
+  nothing from this registry, and no `imagePullSecret` exists anywhere in the tree. With the
+  credential model now decided (local Gitea accounts with PATs) the shape is a
+  `dockerconfigjson` for an account whose token carries `read:package`, referenced from the
+  Deployment and the committed worker Job template — and the worker Job template's shape is
+  pinned by admission, so whether the policy should also pin `imagePullSecrets` deserves a
+  deliberate look rather than a quiet addition. Not built: minting that token is an operator
+  action, and I did not want to guess at a second credential's scope.
+- **Anything about runtime.** The image still does not exist. No dispatcher has
+  authenticated, no issue has been triaged, no worker Job has been created, and the admission
+  policy — live, `Enforce`, six rules — has still never admitted or refused a real Job.
@@ -0,0 +1,113 @@
+---
+date: 2026-10-06
+branch: fix/vpn-ingress-ip-forward
+title: The VPN tunnel never came up — a hostNetwork pod cannot write net.ipv4.ip_forward, and wg-quick treats a failed PostUp as fatal
+---
+
+## What changed
+
+The remote-access VPN reconciled for the first time with a real server key (#60 then #62) and
+**the tunnel did not come up**. One line in my own manifest was the whole cause.
+
+Measured in the `wireguard` container on prod, 2026-10-06:
+
+```
+[#] ip link add dev wg0 type wireguard
+[#] wg addconf wg0 /dev/fd/63
+[#] ip -4 address add 10.90.0.1/24 dev wg0
+[#] ip link set mtu 1420 up dev wg0
+[#] sysctl -q -w net.ipv4.ip_forward=1
+sysctl: permission denied on key "net.ipv4.ip_forward"
+[#] ip link delete dev wg0
+**** Tunnel /config/wg_confs/wg0.conf failed, will stop all others! ****
+```
+
+Everything up to that point worked. **The cause is not a missing capability.** With
+`hostNetwork: true` the runtime mounts `/proc/sys` **read-only** in the container — confirmed in the
+pod's own `/proc/mounts`: `proc /proc/sys proc ro,nosuid,nodev,noexec,relatime` — precisely because
+those sysctls are the *host's* globals and a container must not rewrite them. `CAP_NET_ADMIN` cannot
+lift a read-only mount, so this can never succeed from here. And `wg-quick` treats any failed
+`PostUp` as fatal, so it deleted the interface it had just finished building.
+
+**The line was never needed.** `node_baseline` writes `net.ipv4.ip_forward=1` to
+`/etc/sysctl.d/99-k3s-cilium.conf`, and reading the value from inside the pod returns `1`. I had
+written the header comment *correctly* — "ip_forward is ALREADY 1 on these nodes … so no pod sysctl
+is needed" — and then emitted the sysctl anyway, justified in its own comment as "re-asserted so
+this component does not silently depend on another role's sysctl file surviving". That defensive
+re-assertion is the entire outage. **The lesson is narrow and reusable: in a hostNetwork pod,
+verify host state, never write it.**
+
+Fix:
+
+- **`platform/vpn-ingress/daemonset.yaml`**: the `PostUp = sysctl …` line is gone, replaced by a
+  **read** in the init container — `grep -qx 1 /proc/sys/net/ipv4/ip_forward` — which fails closed
+  with a message naming the `node_baseline` role. Reading `/proc/sys` is permitted; only writing is
+  not. Fail-closed still matters: a tunnel that comes up but cannot forward would satisfy every
+  probe in this component and silently drop every client's traffic.
+- The header bullet that said "no pod sysctl is needed" now also says **do not attempt one**, with
+  the mechanism, so the next author does not re-add it for the same reason I did.
+- The `securityContext` comment claimed NET_ADMIN was for "create the wg0 link, set the host sysctl,
+  and write the netfilter rules". The middle clause was false; corrected.
+- The image's `chown: … Operation not permitted` startup run — plus its own "Permissions could not
+  be set … we will not provide support for it" — is now documented as **expected and harmless**, in
+  both the manifest and the runbook, so nobody chases it. Capabilities are dropped to `NET_ADMIN`
+  only, so its s6 init has no `CAP_CHOWN`; `/config` is a writable tmpfs, everything runs as root,
+  and `wg-quick` proceeds past it (as it did here — the failure was 30 lines later).
+- **`runbooks/vpn-remote-access.md`**: a "what a healthy start looks like" block with the real log
+  lines; `ip_forward is 0` added to the init-failure table; and the note that `0/1 Running` with
+  `Startup probe failed: Unable to access interface: No such device` is the signature of `wg-quick`
+  tearing the tunnel down — read the `[#]` line it died on.
+- **`platform/vpn-ingress/README.md`**: a table of what the first reconcile settled (below).
+
+No sensitive paths: `platform/vpn-ingress/**`, `runbooks/**` and `decisions/**` only. This merges on
+a green gate with no override.
+
+## What I verified
+
+Live prod, read-only, 2026-10-06. **Four questions this component's design rested on are now
+measured rather than assumed — three went the right way, one was the defect above.**
+
+- **The GitOps path is proven end to end.** `Kustomization vpn-ingress` `lastAppliedRevision:
+  main@sha1:cf7d5e4` equals the GitRepository artifact revision. The Secret carries
+  `kustomize.toolkit.fluxcd.io/name: vpn-ingress`, so Flux delivered it.
+- **SOPS decryption works, proven by digest rather than by eye.** The value in
+  `platform/vpn-ingress/wg-server-key.sops.yaml` on `main`, decrypted, is 44 bytes, is **not** the
+  placeholder, and **`wg pubkey` accepts it**. Its SHA-256 equals the SHA-256 of the live Secret's
+  decoded `data.privatekey` (`d7c8f8de6f252649…` both sides). No key material was printed at any
+  point — lengths, booleans and digests only.
+- **The `wg pubkey` guard fired correctly, and its `ENC[` branch was never needed.** During the
+  kubelet window before the updated Secret propagated, all three pods reported *"It is still the
+  committed REPLACE-ME PLACEHOLDER"* — the guard distinguishing a stale/unfilled value from
+  ciphertext, exactly as designed. It cleared on its own once the mount refreshed; **a transient
+  `REPLACE-ME` CrashLoop for a minute or two after the key PR merges is expected, not a fault.**
+- **The kernel module reaches the pod**: `ip link add dev wg0 type wireguard` succeeded and
+  `/proc/modules` lists `wireguard`. So the `node_baseline` addition works and `CAP_SYS_MODULE` is
+  correctly not required.
+- **`allowPrivilegeEscalation: false` does NOT break the image's s6 init** — the container reaches
+  `wg-quick` normally. The flag stays; the fear recorded in #55 is closed.
+- **The iptables backends MATCH, which was my single biggest documented doubt.** The image ships
+  `iptables v1.8.13 (nf_tables)` via `/usr/sbin/xtables-nft-multi`, and Debian 13 is nf_tables. The
+  nightmare case — rules accepted into a table the kernel never consults, so handshakes succeed and
+  every forwarded connection hangs — cannot occur on this pairing.
+- **`net.ipv4.ip_forward` is `1`** in the host netns the pod shares, and `/proc/sys` is `ro` there.
+  Both read directly from the pod.
+- **Toolbox gate** from an isolated worktree: **rc 3**, with `spec-immutability`, `decisions-log`,
+  `lint`, `l0`, `render-golden`, `l1` and `approval-policy` all **pass**; rc 3 is the two
+  environmental skips (`gitea-settings`, conformance L2/L3). **Not green. Reported as rc 3.**
+
+## What I did NOT verify
+
+- **That the tunnel now comes up.** This fix has not reconciled. The next reconcile is the test, and
+  its success criterion is specific: pods `1/1 Running`, and `wg show` reporting `interface: wg0`
+  with `listening port: 51820`.
+- **That the MASQUERADE and FORWARD rules actually apply.** They are the next statements after the
+  one that failed, so **they have never executed**. The backends matching (above) removes the worst
+  failure mode but proves nothing about the rules themselves. First check after the pods go Ready:
+  `iptables -t nat -S POSTROUTING | grep 10.90.0.0/24` on a node.
+- **Anything about client traffic.** Still zero peers enrolled, still no WAN port-forward, still no
+  off-LAN vantage point. The VPN has carried no packet.
+- **Whether the transient `REPLACE-ME` window has an upper bound.** It cleared within ~2 minutes
+  here; I did not determine the kubelet refresh behaviour, so a longer stall after a key change is
+  uncharacterised.
+- **The `sops set` hand-off command**, still. The operator filled the key in by their own route
+  (#62), so the exact quoting I documented inside `dev.sh run bash -c` remains unexercised.
@@ -0,0 +1,85 @@
+---
+date: 2026-10-07
+branch: fix/bulk-nfs-truenas
+title: Repoint bulk NFS at the TrueNAS (192.168.2.30); the PVs must be recreated, not reconciled
+---
+
+## What changed
+
+Both ZFS pools were physically moved off the Proxmox host onto a standalone TrueNAS Community
+Edition at **192.168.2.30**, which sits on prod's own `192.168.2.0/24`. `BULK_NFS_SERVER` moves from
+`192.168.2.102` (the pfSense DNAT prod used to mount through) to `192.168.2.30`.
+
+- `clusters/prod/kustomization.yaml` — `BULK_NFS_SERVER` → `192.168.2.30`. The comment block that
+  justified the DNAT, and the "NOT YET DECIDED / THIS PLACEHOLDER IS LOAD-BEARING" banner, are
+  replaced with the measured export configuration and the recreate requirement below.
+- `clusters/base/cluster-vars.yaml` — base default `192.168.1.9` → `192.168.2.30`. That host no
+  longer exists.
+- `clusters/dev/kustomization.yaml` — same; marked explicitly **inert**, since dev is decommissioned
+  and its nodes are gone. It carries the real address only so nothing in the tree renders a dead one.
+- `docs/BULK-NFS-STORAGE.md` — §1 and §5 rewritten for TrueNAS (exports, service settings, the ZFS
+  `sharenfs` properties that had to be cleared, and the ACL hazard); §7 rewritten now that the
+  placeholder is gone; §9 retargeted from dev to prod; **new §10** documents the PV
+  delete-and-recreate. §2/§3/§4/§6 are unchanged by the move.
+- `catalog/qbittorrent.yaml`, `platform/monitoring/node-pressure-dashboard.yaml` — two comment/prose
+  references to `192.168.2.102` as the live export address.
+
+**The headline operational fact: repointing this knob is NOT a plain reconcile.** A bound PV's NFS
+source is immutable, so Flux's apply fails rather than updating and the pods keep their old, dead
+mount. The five PVs must be deleted and recreated. That sequence is §10 and is an operator action;
+it is **not** performed by this PR.
+
+## What I verified
+
+**On the NAS (192.168.2.30), measured 2026-10-07 by the operator at my request:**
+
+- `zfs list` — `Storage` → `/mnt/Storage`, `Storage/plex` → `/mnt/Storage/plex`,
+  `Storage/nextcloud` → `/mnt/Storage/nextcloud`. The PV paths resolve unchanged.
+- Ownership intact: `/mnt/Storage/plex`, `tv/`, `downloads/`, `movies/`,
+  `downloads/complete/`, `nextcloud/nextcloud/` all `drwxr-xr-x 1000:3000`. `movies/` 1171 entries
+  and `tv/` 107, against 1165 / 107 measured on Proxmox.
+- `acltype=nfsv4` (SCALE's built-in default, `SOURCE: default`), `aclinherit=passthrough`, and no
+  non-trivial ACLs — mode bits still govern.
+- Three stale `sharenfs` dataset properties (`plex`, `nextcloud`, `docker-volumes`) carried over from
+  Proxmox; cleared with `zfs inherit`, re-checked empty.
+- `exportfs -v`: both shares to `192.168.2.10/.11/.12` with `sec=sys,secure,root_squash,no_all_squash`,
+  `rw` on plex and `ro` on nextcloud.
+- `/proc/fs/nfsd/versions` → `+3 +4 +4.1 +4.2`, so the PVs' `nfsvers=4.1` negotiates.
+- **A defect was found and fixed during setup:** the plex share listed `192.168.2.13` — an address no
+  node holds — and so omitted `192.168.2.12` (k3s-prod-3). Corrected and re-verified.
+
+**From the cluster:**
+
+- Node InternalIPs are `192.168.2.10/.11/.12` (`kubectl get nodes`), confirming `.13` was wrong.
+- All five NFS PVs currently name `192.168.2.102`.
+- `192.168.2.30:2049` and `:111` accept connections; `192.168.2.102:2049` does not.
+- **`spec.nfs` immutability, by server-side dry-run** — this is the finding that shapes the change:
+  `spec.persistentvolumesource: Forbidden: spec.persistentvolumesource is immutable after creation`.
+- The pods report `Ready` while their mounts are dead: a `stat /media` answers from attribute cache,
+  but a `readdir` blocks indefinitely (the PVs mount `hard`). Hence "scale to zero first" in §10.
+
+**Gate:** see the PR; run in the pinned toolbox from this worktree.
+
+## What I did NOT verify
+
+- **Nothing has mounted 192.168.2.30.** No pod has touched the new server — the PVs still point at
+  the old address and cannot be updated in place. Every §9 probe (numeric-id passthrough, the uid-1000
+  write, the hardlink/EXDEV check, Plex's read-only posture) is **outstanding**, not passing. The
+  equivalents passed against the old host on 2026-09-12; that is not evidence about this one.
+- **The §10 sequence is reasoned, not executed.** Retain + the renderer's pre-set `claimRef` are read
+  from the manifests and from `catalog/render.py`; I have not watched a PVC rebind after a PV delete
+  in this cluster.
+- **`root_squash` is a behaviour change from the Proxmox export**, which carried `no_root_squash`. The
+  argument that nothing needs root on the tree (LSIO drops to 1000; the images chown only their
+  Longhorn `/config`; both subPath directories already exist at 0755) is reasoned from the images and
+  the measured permissions. It has not been exercised. If a mount or subPath resolution fails with
+  EACCES, Maproot `root:root` reproduces the old export and is the first thing to try.
+- **Whether NFSv3 can be disabled.** Enabled Protocols is `NFSv3, NFSv4`; the PVs only need v4.1, so
+  narrowing would close the rpcbind/mountd/statd surface. Not done — it is a change to make after the
+  cutover is proven, not during it.
+- **Whether pfSense / the legacy stack is actually retired.** I measured only that
+  `192.168.2.102:2049` stopped answering. The other legacy consumers of these datasets
+  (`192.168.1.6`, `10.123.1.10`, `192.168.1.18`) were dropped from the new exports; if any is still
+  live, it has lost access. Not checked.
+- **L2/L3 conformance.** `vars.CLUSTER_AVAILABLE` is unset, so CI proves the L0/L1 offline subset
+  only. Nothing in the gate exercises an NFS mount.
@@ -26,7 +26,8 @@ The fix is the obvious one for concurrent appenders: **stop sharing a file**. Ea
 handoff is its own file. Two agents writing handoffs touch disjoint paths, so there is
 nothing for git to merge and nothing to conflict. This scales to any number of parallel
 branches with zero coordination — which is the point, since the agents are deliberately
-isolated from each other in separate worktrees and cannot coordinate.
+isolated from each other in separate worktrees (required by `CLAUDE.md` §0) and cannot
+coordinate.

 There is deliberately **no index file** and no counter. An index would be a shared
 mutable file — exactly the thing that just failed — and a sequence number would have
@@ -1,61 +1,43 @@
 # Bulk NFS storage — the media library and the legacy Nextcloud archive

-The operator-facing companion to the `class: bulk` storage entries in `catalog/{plex,sonarr,radarr,nextcloud}.yaml`.
-Everything here was **measured** on the storage host on 2026-09-07, over read-only SSH; nothing is
-assumed. It resolves the long-standing **OQ-2** stub (`platform/longhorn/storageclasses.yaml`) for the
+The operator-facing companion to the `class: bulk` storage entries in
+`catalog/{plex,sonarr,radarr,qbittorrent,nextcloud}.yaml`.
+
+**Rewritten 2026-10-07 for the move off Proxmox onto a standalone TrueNAS at 192.168.2.30.** The
+layout (§2), the mount design (§3, §4) and the uid model (§6) are unchanged by the move and were
+measured on the old host on 2026-09-07. Everything about the storage host itself — §1, §5, §10 —
+was re-measured on the NAS on 2026-10-07. Nothing here is assumed. It resolves the long-standing
+**OQ-2** stub (`platform/longhorn/storageclasses.yaml`) for the
 case that actually exists here — attaching datasets that already hold data — and leaves dynamic bulk
 provisioning unimplemented, because nothing needs it.

 ---

-## 1. The storage host, and why prod cannot reach it
+## 1. The storage host

-The bulk data lives on the **Proxmox host's ZFS pool**. That host has exactly one interface:
+The bulk data lives on a **standalone TrueNAS** (Community Edition) at **192.168.2.30** — the same
+`192.168.2.0/24` as prod's nodes (`192.168.2.10/.11/.12`), so it is reached directly, with no NAT
+and no routing decision.

-```
-vmbr0  192.168.1.9/24        default via 192.168.1.1   (pfSense LAN)
-```
-
-| | nodes | reaches 192.168.1.9? |
-|---|---|---|
-| **dev** | 192.168.1.40 / .41 / .42 | **Yes** — same L2 segment, and it already holds an NFS export from this host (`/mnt/Storage/k8s-volumes`, in `/etc/exports`) |
-| **prod** | 192.168.2.10 / .11 / .12 | **No** — 192.168.2.0/24 is pfSense's **WAN**. Ports 22 and 8006 answer only because pfSense port-forwards them via 192.168.2.102. 2049 and 111 do not. |
-
-Opening the storage path for prod is a **pending operator decision**. Its two candidate outcomes give
-different values for the `BULK_NFS_SERVER` cluster-var:
-
-| outcome | `BULK_NFS_SERVER` for prod |
-|---|---|
-| port-forward `192.168.2.102:2049` → `192.168.1.9:2049` | `192.168.2.102` |
-| a WAN→LAN route to 192.168.1.0/24 | `192.168.1.9` |
-
-Until it lands, `clusters/prod` holds `TBD-PROD-BULK-NFS-SERVER`. **See §7 for why that placeholder
-behaves differently from the repo's other ones.**
+**This section used to be the hard part of this page.** The datasets were on the Proxmox host, whose
+only interface was `vmbr0 192.168.1.9/24` on pfSense's **LAN**, while prod sits on pfSense's **WAN**.
+tcp/2049 did not traverse that, so prod mounted through a DNAT at `192.168.2.102`, and which address
+belonged in `BULK_NFS_SERVER` depended on an undecided operator choice. Both pools were physically
+moved on 2026-10-07 (`docs/plans/proxmox-to-n5-air-migration.md`, Phase C/D) and all of that is
+simply gone. Measured 2026-10-07: **192.168.2.102:2049 no longer answers; 192.168.2.30:2049 and
+:111 do.**

 ### It only needs ONE port

 The PVs mount `nfsvers=4.1`. **NFSv4 carries mount and lock in-protocol**, so the only thing that
 must be reachable is **tcp/2049** — no rpcbind/111, no mountd, no statd. NFSv3 would have needed
-four ports, three of them on ephemeral numbers, which is a materially worse firewall story. The
-server advertises `+3 +4 +4.1 +4.2` (`/proc/fs/nfsd/versions`), so v4.1 is available and is the
-conservative floor.
+four ports, three of them on ephemeral numbers. The NAS advertises `+3 +4 +4.1 +4.2`
+(`/proc/fs/nfsd/versions`, measured 2026-10-07), so 4.1 is available and is the conservative floor.

-### The export's client list is the SAME under both outcomes — measured, not assumed
-
-**pfSense DNATs the existing port-forward WITHOUT source NAT.** Connecting from this workstation
-(192.168.2.132) to `192.168.2.102:22`, the storage host logged the peer as `192.168.2.132`:
-
-```
-SSH_CONNECTION=192.168.2.132 39768 192.168.1.9 22
-ss -tn  ->  192.168.1.9:22   192.168.2.132:39768
-```
-
-The original WAN-side source address survives the translation (return traffic finds its way back via
-the host's default route, 192.168.1.1). So under **either** outcome the NFS server will see prod's
-**real** node addresses — 192.168.2.10/.11/.12 — and the `sharenfs` change in §5 is the same either
-way. **It does not have to wait for the routing decision.**
-
---
+**NFSv4 is not on by default and its absence does not look like a storage problem.** TrueNAS ships
+NFSv3-only until NFSv4 is added to *Services → NFS → Enabled Protocols*. Without it the mount never
+completes and the pods sit in `ContainerCreating` — no permission error, nothing in the app logs,
+just no volume.

 ## 2. The layout, as found

@@ -107,16 +89,18 @@ why it is mounted read-only; see §6.
 | plex | `/mnt/Storage/plex` | `/media` | — | **ro** | ReadOnlyMany |
 | sonarr | `/mnt/Storage/plex` | `/media` | — | rw | ReadWriteMany |
 | radarr | `/mnt/Storage/plex` | `/media` | — | rw | ReadWriteMany |
+| qbittorrent | `/mnt/Storage/plex` | `/downloads` | `downloads` | rw | ReadWriteMany |
 | nextcloud | `/mnt/Storage/nextcloud` | `/mnt/legacy-nextcloud` | `nextcloud` | **ro** | ReadOnlyMany |

 In-app paths that follow: Plex libraries at `/media/movies`, `/media/tv`, `/media/photos`; Sonarr
 Root Folder `/media/tv`; Radarr Root Folder `/media/movies`; both importing from
 `/media/downloads/complete/{tv-sonarr,radarr}`.

-**All three media consumers use the identical mountPath on purpose.** When qbittorrent is eventually
-given the same export (it is not in this change), the arrs and the download client will already agree
-on absolute paths, which is the second precondition for hardlinked imports — otherwise every import
-needs a Remote Path Mapping and quietly falls back to copying when one is missing.
+**The three library consumers use the identical mountPath on purpose**, and qbittorrent has since
+been given the same export (narrowed by `subPath: downloads`, presented at `/downloads` to match its
+existing `Session\DefaultSavePath`). The arrs and the download client therefore agree on absolute
+paths, which is the second precondition for hardlinked imports — otherwise every import needs a
+Remote Path Mapping and quietly falls back to copying when one is missing.

 **`/media` and not `/data`, and that is not cosmetic.** The arrs' Longhorn config PVC renders at the
 renderer default `/data/config`. A media mount at `/data` would be mounted **over** it and mask the
@@ -147,62 +131,123 @@ Narrowing that would cost hardlinks, which is the worse trade.

 ---

-## 5. The export change the operator must apply — STRICTLY ADDITIVE
+## 5. The exports, as configured on TrueNAS — and the settings that decide permissions

-**Do not apply this from the repo.** It is an operator step on the storage host, recorded here so the
-exact value is reviewable. The existing consumers **must keep working**: 192.168.1.6, 10.123.1.10 and
-192.168.1.18 on the media tree, and 192.168.1.6 and 192.168.1.5 on the Nextcloud dataset, are the
-live non-k3s prod stack.
+**Do not apply this from the repo.** It is operator configuration on the NAS, recorded here so the
+exact values are reviewable. Everything below was **measured on 192.168.2.30 on 2026-10-07**, after
+the move.

-Current values (`zfs get sharenfs Storage`):
+### The exports

 ```
-Storage/plex       rw=@192.168.1.6:@10.123.1.10:@192.168.1.18,no_subtree_check,no_root_squash
-Storage/nextcloud  [email protected]:@192.168.1.5,no_subtree_check,no_root_squash
+/mnt/Storage/plex       192.168.2.10 192.168.2.11 192.168.2.12
+                        (sync,wdelay,hide,no_subtree_check,sec=sys,rw,secure,root_squash,no_all_squash)
+/mnt/Storage/nextcloud  192.168.2.10 192.168.2.11 192.168.2.12
+                        (sync,wdelay,hide,no_subtree_check,sec=sys,ro,secure,root_squash,no_all_squash)
 ```

-### `Storage/plex` — append the six k3s node addresses to the existing `rw=` list
+Per-node addresses rather than `@192.168.2.0/24`, following the precedent of the old host. A `/24`
+would work and would survive adding a node; it also grants the whole subnet.
+
+**All three nodes must appear on BOTH shares.** Any media pod can be scheduled on any node, so a
+missing node is a latent failure, not an immediate one: it surfaces the first time a pod reschedules
+there, as `access denied by server while mounting`, with the cause weeks stale. One was caught
+exactly this way during setup — the plex share listed `192.168.2.13`, an address no node holds, and
+so was missing `192.168.2.12` (k3s-prod-3). Nothing was failing at the time.
+
+### The option flags ARE the permission contract
+
+| flag | why it matters here |
+|---|---|
+| **`no_all_squash`** | The one the whole model rests on. Client uids pass through untouched, so the arrs' `PUID=1000` arrives as the owner of a `0755 1000:3000` tree. In the UI this is **Mapall User/Group left EMPTY** — setting either squashes every client to one identity and erases the reader/writer distinction entirely. |
+| **`sec=sys`** | AUTH_SYS. Numeric uid/gid, not Kerberos principals. §6 is only true because of this. |
+| **`root_squash`** | Maproot left empty. The Proxmox export carried `no_root_squash`; **nothing here needs it** — every write to the tree happens after the LSIO drop to uid 1000, and the images only chown their Longhorn `/config`. This is a deliberate tightening over the old export, not parity. |
+| **`rw` / `ro`** | The archive's read-only posture is **server-enforced**, as it was before. The media tree cannot get the same treatment — see below. |
+| **`secure`** | Reserved source ports required; "Allow non-root mount" off. The kubelet mounts as root from a reserved port and does not need the exception. |
+
+**Plex's read-only posture is still a CLIENT-side guarantee.** Plex is ro and the arrs are rw, but
+all four can land on any node, so the server sees the same three source addresses for all of them
+and cannot distinguish the reader from the writers. `spec.nfs.readOnly: true` on `plex-media` plus
+the volumeMount flag is the whole enforcement. Unchanged by the move; an honest limitation, not an
+oversight. If it ever needs to be server-enforced, the lever is a dedicated node pool for Plex.
+
+### Service settings that are NOT obvious from the export list
+
+- **Enabled Protocols must include NFSv4** (above).
+- **Require Kerberos for NFSv4: off.** The numeric AUTH_SYS pass-through is the model.
+- **Manage Groups Server-side: off.** This is `rpc.mountd --manage-gids`: the server *discards the
+  client's supplied group list* and looks that uid's groups up in TrueNAS's own user database
+  instead. With no local uid 1000 defined, the arrs' `PGID=3000` would simply vanish. Writes would
+  survive anyway — uid 1000 **owns** the tree, so the owner bits grant access without the group —
+  but it is a free way to lose group semantics.
+- **NFSv4 DNS Domain: blank.** It only feeds `idmapd.conf`, which numeric mapping bypasses.
+- **Bind IP 192.168.2.30** means loopback does not answer: check with `showmount -e 192.168.2.30`,
+  not `localhost`.
+
+There is **no** "NFSv3 ownership model for NFSv4" control on current TrueNAS — it was an older
+TrueNAS/CORE option, and no replacement is needed: on a Linux client against a Linux server over
+AUTH_SYS, both the `nfs` and `nfsd` modules default to `nfs4_disable_idmapping=Y`, so NFSv4 carries
+raw numeric ids rather than `user@domain` principals. §9's `ls -n` probe is how you confirm it.
+
+### The ZFS `sharenfs` properties must be CLEARED, not edited
+
+The pools arrived with the old host's exports still set as dataset properties:
+
+```
+Storage/plex              [email protected]:@10.123.1.10:@192.168.1.18:@192.168.2.10:@192.168.2.11:@192.168.2.12,no_subtree_check,no_root_squash
+Storage/nextcloud         [email protected]:@192.168.1.5,[email protected]:@192.168.2.11:@192.168.2.12,no_subtree_check,no_root_squash
+Storage/docker-volumes    [email protected]:@192.168.1.5:@192.168.1.10:@192.168.1.18,no_subtree_check,no_root_squash
+```
+
+TrueNAS generates `/etc/exports` from its own middleware database and will fight a property it did
+not set — the failure mode is two differently-configured exports of one path, with no indication
+which is in force. Cleared 2026-10-07:

 ```sh
-zfs set sharenfs='[email protected]:@10.123.1.10:@192.168.1.18:@192.168.1.40:@192.168.1.41:@192.168.1.42:@192.168.2.10:@192.168.2.11:@192.168.2.12,no_subtree_check,no_root_squash' Storage/plex
+zfs inherit sharenfs Storage/plex
+zfs inherit sharenfs Storage/nextcloud
+zfs inherit sharenfs Storage/docker-volumes
 ```

-Every pre-existing host is preserved verbatim and no option changes; only clients are added.
+`Storage` is `off`, so each resolves to `off`.

-### `Storage/nextcloud` — add the k3s nodes to a **`ro=`** list, not to `rw=`
+### Do NOT touch the dataset's permissions or ACLs

-```sh
-zfs set sharenfs='[email protected]:@192.168.1.5,[email protected]:@192.168.1.41:@192.168.1.42:@192.168.2.10:@192.168.2.11:@192.168.2.12,no_subtree_check,no_root_squash' Storage/nextcloud
-```
+The tree's ownership **is** the access story (§6), and TrueNAS offers two ways to destroy it
+irreversibly across 8.33 T.

-This is the one place read-only can be enforced **server-side**, and it is worth taking: only
-Nextcloud consumes this dataset from k3s, so the export itself can refuse writes. Even a
-misconfigured client cannot then damage the archive.
+`Storage/plex` carries `acltype=nfsv4` (SCALE's built-in default, `SOURCE: default`) and
+`aclinherit=passthrough` (inherited). Measured 2026-10-07: the directories carry **trivial ACLs
+only** — `nfs4xdr_getfacl` shows just `owner@`/`group@`/`everyone@` matching the mode — so `0755
+1000:3000` governs exactly as it did under Proxmox.

-**The media tree cannot get the same treatment.** Plex is read-only and the arrs are read-write, but
-all three may be scheduled on any node, so the server sees the same source addresses for all of
-them and cannot distinguish the reader from the writers. **Plex's read-only posture is therefore a
-client-side guarantee** (`spec.nfs.readOnly: true` on `plex-media`, plus the volumeMount flag) — an
-honest limitation, not an oversight. If it ever needs to be server-enforced, the lever is a
-dedicated node pool for Plex, which is a much larger change.
+- **Stay out of the dataset's Edit Permissions / Edit ACL screen.** On an `acltype=nfsv4` dataset
+  that is a full ACL editor, and its presets write *real* NFSv4 ACLs, recursively if permitted.
+  There is no undo.
+- `aclinherit=passthrough` means a single ACL written at `/mnt/Storage/plex` would be **inherited by
+  everything created under it afterwards** — the blast radius is the whole future library, not one
+  directory.
+- Note GNU `ls`'s `+` marker is **not** a reliable ACL indicator here: it looks for a POSIX ACL
+  xattr, and this dataset stores NFSv4 ACLs elsewhere. Use `nfs4xdr_getfacl`.

-Per-node addresses rather than `@192.168.2.0/24` follows the precedent already on this host
-(`/etc/exports` lists the dev nodes individually, as `/32`). A `/24` would work and would survive
-adding a node; it also grants the whole subnet. Per-node is the tighter default.
+`xattr=on` rather than `sa` is a performance detail, not a permissions one, and changing it would
+not affect existing files.

 ### Verifying, without changing anything

 ```sh
-exportfs -v                  # the new client lines appear, existing ones unchanged
-zfs get sharenfs Storage/plex Storage/nextcloud
+cat /proc/fs/nfsd/versions          # +4.1 must be present
+exportfs -v                         # the two shares, three nodes each, flags as tabulated above
+showmount -e 192.168.2.30           # NOT localhost -- the service is bound to one address
+zfs get -r -o name,property,value,source sharenfs Storage    # every row off or -
 ```

---
-
 ## 6. uid / gid — the failure this design exists to avoid

-The export uses `sec=sys` and `no_root_squash`, so **the client's numeric uid is passed through
-verbatim** and the server's on-disk ownership is the entire access story. The media tree is
+The export uses `sec=sys` and `no_all_squash`, so **the client's numeric uid is passed through
+verbatim** and the server's on-disk ownership is the entire access story. (It no longer carries
+`no_root_squash`, which the Proxmox export did — see §5. Nothing here needs it, and the uid that
+matters is 1000, not 0.) The media tree is
 `0755 1000:3000` throughout (some directories `1000:1000`), so **only uid 1000 can write it**.

 **`fsGroup` cannot fix this, and reaching for it is how this gets misdiagnosed.** The in-tree NFS
@@ -233,24 +278,27 @@ Nextcloud needs no uid work at all, which is one more reason its mount is read-o

 ---

-## 7. The prod placeholder does NOT fail at apply time — read this before merging
+## 7. Why this knob is unvalidated at create AND immutable at update
+
+**The `TBD-PROD-BULK-NFS-SERVER` placeholder is gone** (2026-10-07) — prod now carries a real
+address, because the NAS is on prod's own subnet and there is no longer a decision to defer. The
+hazard that made it load-bearing is worth keeping on the page, because it is the half that explains
+why §10 exists.

 Every other `TBD-PROD-*` in `clusters/prod/kustomization.yaml` is rejected loudly by CRD validation
-(Cilium, LB-IPAM, CNPG, Velero) because it is not a valid IP or URL. **This one is not.**
+(Cilium, LB-IPAM, CNPG, Velero) because it is not a valid IP or URL. **This one was not.**

-A PersistentVolume's `spec.nfs.server` is an **unvalidated string**. The API server accepts
-`TBD-PROD-BULK-NFS-SERVER`, the PV is created, and the PVC **binds** to it — binding is pure
-control-plane and never touches the server. The failure appears only when a pod mounts:
+A PersistentVolume's `spec.nfs.server` is an **unvalidated string**. The API server accepted
+`TBD-PROD-BULK-NFS-SERVER`, the PV was created, and the PVC **bound** to it — binding is pure
+control-plane and never touches the server. The failure appeared only when a pod mounted:

 ```
 MountVolume.SetUp failed ... Failed to resolve server TBD-PROD-BULK-NFS-SERVER
 ```

-so **plex, sonarr, radarr and nextcloud would sit in ContainerCreating on prod.**
-
-**Consequently: set `BULK_NFS_SERVER` in `clusters/prod/kustomization.yaml` BEFORE prod reconciles a
-revision that carries these bulk volumes.** Dev renders a working value and is where these manifests
-are meant to be proven first.
+**The same field is immutable on UPDATE** (§10), which is the other half of the same awkwardness: a
+wrong value is accepted silently at create, and then cannot be corrected in place. Together they are
+why repointing this knob is a delete-and-recreate rather than a reconcile.

 ### The static guard this convention leans on is missing from `main` — but the gate now refuses the value anyway

@@ -287,10 +335,9 @@ Without the arm, HALF A is what holds the line, by design.
   EPHEMERAL layer"). Plex was fixed; sonarr, radarr, qbittorrent and jackett were not. Fixing it
   means those apps start from an empty config volume, so it belongs in its own change with the
   operator present. **This change does not make it worse** — that is why the media mount is `/media`.
-2. **qbittorrent has no bulk mount.** Today the arrs' import source is written by the **legacy
-   non-k3s** download client, which is coherent while the legacy stack stays live. Giving the k3s
-   qbittorrent the same export at the same `/media` path is the natural follow-up, and the paths were
-   chosen so it needs no Remote Path Mapping.
+2. **RESOLVED — qbittorrent now has the bulk mount** (`subPath: downloads` at `/downloads`), so the
+   import source is written by the k3s download client rather than the legacy non-k3s one. See
+   `catalog/qbittorrent.yaml`.
 3. **`/mnt/Storage/plex/downloads/downloads` is a symlink to `/shared/downloads`**, which is outside
   the export. Over NFS it is a dangling symlink on every client. Harmless, but expect Sonarr to log
   it while scanning `downloads/`.
@@ -300,10 +347,10 @@ Without the arm, HALF A is what holds the line, by design.
 5. **`nconnect` was not set.** It would likely help throughput on the media tree, but it is a tuning
   change that should be measured, not guessed, and it changes client behaviour under server
   failure.
-6. **Nothing was verified against a live cluster.** No `kubectl` context is usable from this
-   workstation (browser-OIDC only), and this change is manifest-authoring under an explicit
-   do-not-apply constraint. Every claim about the *host* is measured; every claim about *binding and
-   mounting* is reasoned from the manifests.
+6. **Every claim about the NAS in §5 is measured (2026-10-07); the post-move MOUNT is not.** The PVs
+   still have to be recreated (§10) before any pod mounts 192.168.2.30, so the §9 probes are the
+   outstanding verification, not a formality. The pre-move equivalents did pass against the old host
+   on 2026-09-12.
 7. **The bulk-tier requirement ID is deliberately not typed on any non-`.md` line of this change.**
   `ci/touched-requirements.sh` attributes requirements from R-IDs appearing in added lines, and the
   in-cluster conformance test for the bulk tier is still a gap, so typing it would select a
@@ -312,36 +359,95 @@ Without the arm, HALF A is what holds the line, by design.

 ---

-## 9. Validating on dev, once the export is extended
+## 9. Validating, after the PVs are recreated

-Dev can prove all of this before prod's network path exists. Read-only checks first:
+These run against **prod**; dev is decommissioned. They are the outstanding verification for the
+move — nothing below has been run against 192.168.2.30. Read-only checks first:

 ```sh
-infra/devcontainer/dev.sh run kubectl --context k3s-dev get pv
-infra/devcontainer/dev.sh run kubectl --context k3s-dev get pvc -A | grep -E 'media|legacy-archive'
-infra/devcontainer/dev.sh run kubectl --context k3s-dev -n sonarr get pod -o wide
+./infra/devcontainer/dev.sh run bash -c 'kubectl --context k3s-prod get pv -o custom-columns=\
+NAME:.metadata.name,SERVER:.spec.nfs.server,PATH:.spec.nfs.path,STATUS:.status.phase'
 ```

-Expect **four** PVs — `plex-media`, `sonarr-media`, `radarr-media`, `nextcloud-legacy-archive` (three
-of them naming the *same* export, one per namespace, which is the cross-namespace model) — each
-`Bound` to the same-named PVC, with `RECLAIM POLICY Retain` and an empty `STORAGECLASS`.
+Expect **five** NFS PVs — `plex-media`, `sonarr-media`, `radarr-media`, `qbittorrent-downloads`,
+`nextcloud-legacy-archive` (four of them naming the *same* export, one per namespace, which is the
+cross-namespace model) — each `Bound`, `RECLAIM POLICY Retain`, empty `STORAGECLASS`, and
+**`SERVER 192.168.2.30`**. A PV still showing `192.168.2.102` means the recreate in §10 did not
+happen; Flux will NOT have updated it in place.

-Then the two things that actually matter, from inside a pod:
+Then the four things that actually matter, from inside a pod:

 ```sh
-# (a) the writer can write — this is the uid check, and it is the one that fails in practice
-infra/devcontainer/dev.sh run kubectl --context k3s-dev -n sonarr exec deploy/sonarr -- \
-  sh -c 'id; touch /media/tv/.k3s-write-probe && rm /media/tv/.k3s-write-probe && echo WRITE-OK'
+# (a) numeric ids survived the wire -- the idmapping check, new since the TrueNAS move
+kubectl --context k3s-prod -n sonarr exec deploy/sonarr -c sonarr -- sh -c 'ls -n /media | head -3'
+#     expect uid 1000 / gid 3000 on the entries. 65534 / nobody means ids are being mapped, not
+#     passed through, and every import will fail EACCES while the pod still reports Ready.

-# (b) hardlinks work BETWEEN the library and the download path — the root-mount check
-infra/devcontainer/dev.sh run kubectl --context k3s-dev -n sonarr exec deploy/sonarr -- \
+# (b) the writer can write -- the uid check, and the one that fails in practice
+kubectl --context k3s-prod -n sonarr exec deploy/sonarr -c sonarr -- \
+  sh -c 'touch /media/tv/.k3s-write-probe && rm /media/tv/.k3s-write-probe && echo WRITE-OK'
+
+# (c) hardlinks work BETWEEN the library and the download path -- the root-mount check
+kubectl --context k3s-prod -n sonarr exec deploy/sonarr -c sonarr -- \
  sh -c 'set -e; d=/media/downloads/complete/tv-sonarr/.probe; t=/media/tv/.probe-link;
         echo x > "$d"; ln "$d" "$t"; ls -i "$d" "$t"; rm -f "$d" "$t"; echo HARDLINK-OK'

-# (c) the reader really is read-only
-infra/devcontainer/dev.sh run kubectl --context k3s-dev -n plex exec deploy/plex -- \
-  sh -c 'touch /media/.probe 2>&1 | head -1'      # expect "Read-only file system"
+# (d) the reader really is read-only
+kubectl --context k3s-prod -n plex exec deploy/plex -- sh -c 'touch /media/.probe 2>&1 | head -1'
+#     expect "Read-only file system"
 ```

-`(b)` printing two identical inode numbers is the proof that §4's argument holds in practice. If it
+`(c)` printing two identical inode numbers is the proof that §4's argument holds in practice. If it
 prints `EXDEV`, something has split the single mount back into two.
+
+Reading the failures together is what localises the fault: **(b) EACCES with (a) showing `nobody`**
+is idmapping (§5 service settings). **(b) EACCES with (a) showing `1000`** is on-disk ownership —
+stop and check `ls -ldn` on the NAS before changing anything else.
+
+---
+
+## 10. Repointing BULK_NFS_SERVER means DELETING AND RECREATING THE PVs
+
+**A bound PersistentVolume's NFS source is immutable.** Measured by server-side dry-run on
+2026-10-07:
+
+```
+$ kubectl patch pv sonarr-media --type=json --dry-run=server \
+    -p '[{"op":"replace","path":"/spec/nfs/server","value":"192.168.2.30"}]'
+The PersistentVolume "sonarr-media" is invalid: spec.persistentvolumesource: Forbidden:
+  spec.persistentvolumesource is immutable after creation
+```
+
+Note the pairing with §7: `spec.nfs.server` is **unvalidated at create** (any string is accepted and
+the PVC binds) and **immutable at update**. So editing `BULK_NFS_SERVER` alone does not fail loudly
+and does not work either — Flux's apply errors on the five PVs and the pods keep their previous,
+now-dead mount.
+
+This is safe to do because `persistentVolumeReclaimPolicy: Retain` means deleting a PV never touches
+the data, and `catalog/render.py` emits a **pre-set `claimRef`** on each one, so a recreated PV
+rebinds its own PVC with no manual step.
+
+**Operator sequence** (mutating `kubectl` is an operator action, not an agent action):
+
+```sh
+# 1. Stop the consumers. This also releases the hung hard-mounts against the old server:
+#    the pods report Ready, but any real I/O on /media blocks indefinitely once 2049 stops
+#    answering, because the PVs mount `hard`.
+for ns in plex sonarr radarr qbittorrent nextcloud; do
+  kubectl --context k3s-prod -n $ns scale deploy --all --replicas=0
+done
+
+# 2. Delete the five PVs. Retain + no live claim means nothing is reclaimed or erased.
+kubectl --context k3s-prod delete pv plex-media sonarr-media radarr-media \
+  qbittorrent-downloads nextcloud-legacy-archive
+
+# 3. Let Flux reconcile the revision carrying BULK_NFS_SERVER=192.168.2.30, which recreates them.
+#    Confirm .status.lastAppliedRevision matches the GitRepository artifact before continuing.
+
+# 4. Bring the consumers back, then run every probe in §9.
+```
+
+The PVCs pass through `Lost` between steps 2 and 3; that is expected and resolves when the PV with
+the matching `claimRef` reappears. If a PVC is still `Lost` after Flux reconciles, the PV name or
+its `claimRef` namespace does not match — do **not** delete the PVC to "fix" it.
+
@@ -233,9 +233,21 @@ about runtime behaviour in this document is a design claim, not a measurement.

 ## Follow-ups, in the order they are worth doing

-1. **Build, push, pin.** Operator runs `infra/agent/build-image.sh`, pushes, and one PR
-   replaces both placeholder digests. Expect the build to need iteration: the nodejs module
-   stream and the npm install have never run against this base.
+1. **Make the registry pullable, THEN build, push, pin.** Measured after the merge, and
+   neither half is declared anywhere in this repository
+   (`decisions/2026-10-05-pm-agent-registry-pull-prereq.md`):
+   (i) the nodes resolved the registry hostname to the WAN IP and failed TLS against the
+   router's `CN=%D` placeholder certificate — **diagnosed and fixed** by pinning
+   `gitea.{{ k3s_base_domain }}` to the Gateway VIP in `node_baseline_hosts_pins`, the same
+   pin the Keycloak issuer already carries, applied by
+   `ansible-playbook playbooks/node-baseline.yml -e k3s_hosts=k3s_prod --tags hosts`;
+   (ii) the pull is still unauthenticated and no `imagePullSecret` exists in the tree — with
+   the credential decision now being local Gitea accounts with PATs, that means a
+   `dockerconfigjson` for an account whose token carries `read:package`. Only then does the
+   digest matter. Operator runs `infra/agent/build-image.sh`, pushes, and one PR replaces both
+   placeholder digests. Expect the build itself to need iteration too: the nodejs module
+   stream and the npm install have never run against this base. The same two blockers sit in
+   front of `conformance-runner`, which shares the registry path and has never been pulled.
 2. **Create the credentials** per `pm-agent-credentials.sops.yaml.example`, and **verify the
   bot's permission is `write`, not `admin`** — that measurement is the control that keeps
   the agent out of its own approval gate.
@@ -90,9 +90,19 @@ esac
 # pointing at an external host would be REACHABLE: it could clone a repository that is not
 # this one and push this repository's work somewhere else. The allowlist is baked in here,
 # where changing it requires rebuilding the image whose digest admission pins.
+#
+# ONE ENTRY, AND IT IS THE CLUSTER-LOCAL SERVICE NAME. This agent runs INSIDE the cluster, so
+# it reaches Gitea the way every other in-cluster consumer does — `*.svc.cluster.local` —
+# which is by design a different path from how a client outside the cluster reaches the same
+# service. The external hostname `gitea.home.keithjackson.dev` used to be a second accepted
+# value here; it is removed deliberately. It was never needed (nothing sets it), it routes
+# in-cluster traffic out through the Gateway and back for no reason, and as an ACCEPTED value
+# it widened this allowlist to a host reachable over the `world:443` egress rule — which is
+# the exact shape of injection the allowlist exists to refuse. The cluster-local name also
+# depends on none of public DNS, Cloudflare, the Gateway or the certificate.
 case "${PM_GITEA_URL}" in
-  http://gitea.gitea.svc.cluster.local:3000|https://gitea.home.keithjackson.dev) ;;
-  *) die "PM_GITEA_URL '${PM_GITEA_URL}' is not an allowed git host (see this script's header)" ;;
+  http://gitea.gitea.svc.cluster.local:3000) ;;
+  *) die "PM_GITEA_URL '${PM_GITEA_URL}' is not the allowed in-cluster git host (see this script's header)" ;;
 esac
 [[ "${PM_GITEA_OWNER}" =~ ^[A-Za-z0-9][A-Za-z0-9._-]{0,38}$ ]] || die "PM_GITEA_OWNER is malformed"
 [[ "${PM_GITEA_REPO}"  =~ ^[A-Za-z0-9][A-Za-z0-9._-]{0,99}$ ]] || die "PM_GITEA_REPO is malformed"
@@ -86,12 +86,22 @@ refuses "branch equal to the base branch"       "must not be the base branch" \
 # --- where code comes FROM and goes TO -------------------------------------
 # The namespace's egress policy permits tcp/443 to the world (the model needs it), so an
 # injected host would be REACHABLE. These are the cases that matter most.
-refuses "a redirected git host"                 "is not an allowed git host" \
+refuses "a redirected git host"                 "is not the allowed in-cluster git host" \
        PM_GITEA_URL=https://evil.invalid
-refuses "a real, reachable, WRONG git host"     "is not an allowed git host" \
+refuses "a real, reachable, WRONG git host"     "is not the allowed in-cluster git host" \
        PM_GITEA_URL=https://github.com
-refuses "the right host on a smuggled path"     "is not an allowed git host" \
+refuses "the right host on a smuggled path"     "is not the allowed in-cluster git host" \
        PM_GITEA_URL=http://gitea.gitea.svc.cluster.local:3000/../..
+# This agent is IN the cluster, so it reaches Gitea by its cluster-local service name. The
+# EXTERNAL hostname is refused too — it used to be a second accepted value, and as an
+# accepted value it widened this allowlist to a host reachable over the `world:443` egress
+# rule, which is the injection shape the allowlist exists to refuse.
+refuses "this Gitea's EXTERNAL hostname"        "is not the allowed in-cluster git host" \
+        PM_GITEA_URL=https://gitea.home.keithjackson.dev
+refuses "the cluster-local name over https"     "is not the allowed in-cluster git host" \
+        PM_GITEA_URL=https://gitea.gitea.svc.cluster.local:3000
+refuses "the cluster-local name, wrong port"    "is not the allowed in-cluster git host" \
+        PM_GITEA_URL=http://gitea.gitea.svc.cluster.local:8080
 refuses "a malformed owner"                     "PM_GITEA_OWNER is malformed" \
        'PM_GITEA_OWNER=../other-org'
 refuses "a malformed repository"                "PM_GITEA_REPO is malformed" \
@@ -15,6 +15,13 @@ facts about the container you are running inside.
  pinned toolchain is on `PATH` — you are *inside* the toolbox, so run `./ci/gate.sh`
  directly. Do **not** try to run `infra/devcontainer/dev.sh`; there is no container engine
  here and no need for one.
+- **`CLAUDE.md` §0 is already satisfied. Do not make a worktree.** §0 tells agents to work in
+  a git worktree outside the shared checkout, because that checkout is the operator's working
+  copy and several runs fight over its HEAD. There is no shared checkout here: this container
+  holds a fresh clone of its own, made for this assignment and thrown away with the pod, which
+  is what §0 is asking for. `git worktree add` would put your edits somewhere the wrapper that
+  started you does not look — so your work would be committed by nobody and the issue would
+  get a "changed nothing" report. Work in the tree you are standing in.
 - You hold **no cluster credentials** — no kubeconfig, and no ServiceAccount token is
  mounted. `kubectl` is on `PATH` and will fail. That is deliberate: you cannot measure the
  live platform, so do not claim to have. Anything that needs a cluster is a line in "What
@@ -327,6 +327,29 @@ node_baseline_hosts_pins:
  - ip: "192.168.2.20"
    names:
      - "keycloak.{{ k3s_base_domain }}"
+      # gitea: the SECOND node process to need this pin, for the identical reason, found
+      # 2026-10-06. containerd pulls images as a NODE process, so it resolves through the
+      # public upstreams above and gets the CNAME to wan.home.keithjackson.dev — the WAN IP,
+      # which this router does not hairpin. The pull then fails on the router's own
+      # placeholder certificate rather than on anything to do with the image:
+      #
+      #   failed to resolve reference "gitea.home.keithjackson.dev/home-network/agent-runner@sha256:…":
+      #   tls: failed to verify certificate: x509: certificate is not valid for any names,
+      #   but wanted to match gitea.home.keithjackson.dev
+      #
+      # Measured from the workstation the same day, against the WAN address with that SNI:
+      #   subject=C=ZZ, ST=Somewhere, L=Unknown, O=%D342e7e6b, CN=%D
+      #   No extensions in certificate          <- no SANs at all, hence "not valid for ANY names"
+      # while the same name via PiHole answers 192.168.2.20 and serves the real
+      # Let's Encrypt *.home.keithjackson.dev. So the certificate and the Gateway are fine;
+      # only the node's ANSWER is wrong. Same root cause, same fix, as the issuer pin above.
+      #
+      # WHO NEEDS IT: any workload whose image lives in the in-cluster Gitea registry —
+      # today platform/pm-agent (agent-runner) and conformance/incluster
+      # (conformance-runner), neither of which has ever been pulled. A pull is still
+      # UNAUTHENTICATED after this pin, which is a separate thing to settle; this only makes
+      # the node reach the right endpoint.
+      - "gitea.{{ k3s_base_domain }}"

 # --- platform hostname suffix, ANSIBLE SIDE (R-ENV-02, R-DNS-01) --------------------
 # PROD SERVES ITS OWN SUBDOMAIN. [parity] MUST equal BASE_DOMAIN in clusters/prod/
@@ -74,12 +74,23 @@ node_baseline_backports_kernel_packages:
 # kernel, and how do I undo it?" from the machine itself.
 node_baseline_backports_kernel_stamp: /etc/node-baseline-backports-kernel

+# Modules written to /etc/modules-load.d/k3s-cilium-longhorn.conf (persistent) AND modprobe'd now.
 node_baseline_kernel_modules:
  - overlay
  - br_netfilter
  - iscsi_tcp
  - dm_crypt
  - nfs
+  # Remote-access VPN (platform/vpn-ingress). The WireGuard DaemonSet creates its wg0 link in the
+  # HOST netns with CAP_NET_ADMIN only -- it is deliberately NOT granted CAP_SYS_MODULE, so it
+  # cannot autoload this itself: `ip link add wg0 type wireguard` fails outright when the module is
+  # absent, and the pod CrashLoops. Loading it here is therefore a PREREQUISITE of that component,
+  # not a nicety. In-tree since kernel 5.6, so Debian 13's 7.1.8 ships it and there is nothing to
+  # install. Naming it here also means the kernel does the crypto: without the module a WireGuard
+  # container's only fallback is slow userspace wireguard-go, which we do not use (and which would
+  # need /dev/net/tun -- a device a hostPath mount cannot actually grant, as the /dev/dri attempt
+  # proved: visible but EPERM from the device cgroup).
+  - wireguard

 # --- DATA DISKS (tasks/disks.yml, tag `disks`) ----------------------------------------
 # The SHAPE of a node's storage is DECLARED per environment, never inferred from whether
@@ -32,9 +32,23 @@ ARG TARGETARCH=amd64
 # Distro packages: libvirt client libs (harmless disk-image utilities), ansible, ssh,
 # disk-image + cloud-init seed tooling, python3-pip (for the pip-installed test tools),
 # diffutils (provides `diff`, used by L1 golden render checks), and common utilities.
+#
+# wireguard-tools + qrencode serve the REMOTE-ACCESS VPN (platform/vpn-ingress):
+#   * wireguard-tools gives `wg genkey` / `wg pubkey`, needed to mint the server key and to derive
+#     every client profile's `[Peer] PublicKey` (infra/vpn-ingress/new-peer.sh).
+#   * qrencode renders a client profile as a QR code, which is how a PHONE gets enrolled.
+# They are here rather than on the operator's host because this image is THE toolchain
+# (CLAUDE.md §5; README "Don't install the toolchain on the host"). That rule was briefly broken
+# by a runbook that told the operator to run `wg` on the host and `sops` in here, and then split
+# every step across the boundary to work around it — a procedure nobody should have to follow, and
+# one that cannot be reproduced in CI. Both tools in one image means `sops -d … | wg pubkey` is
+# just a pipeline again.
+# Unpinned on purpose, like every other dnf package here: the Fedora base is what is pinned
+# (FEDORA_VERSION), and these are not gate tools whose version changes what green means.
 RUN dnf -y install --setopt=install_weak_deps=False \
      libvirt-client qemu-img cloud-utils genisoimage openssh-clients \
      ansible-core python3-libvirt python3-pip diffutils \
+      wireguard-tools qrencode \
      git make jq unzip tar gzip xz which ca-certificates curl \
 && dnf clean all

@@ -14,6 +14,7 @@ baseline, and the *same* binaries CI uses.
 | Provisioning | OpenTofu (`bpg/proxmox` provider), `ansible-core`, `openssh-clients` |
 | GitOps / cluster | `flux`, `kubectl`, `helm` |
 | Secrets | `sops`, `age` + `age-keygen` |
+| VPN (`platform/vpn-ingress`) | `wg` (wireguard-tools) — mint the server key, derive client public keys; `qrencode` — render a client profile as a phone-scannable QR |
 | **CI gate** | `yamllint`, `check-jsonschema`, `kyverno` CLI, `kyverno-json`, `chainsaw`, `yq`, `diffutils`, `make` |
 | Misc | `qemu-img`, `cloud-utils`/`genisoimage`, `libvirt-client` (disk-image utilities only — leftovers from the libvirt era, harmless) |

@@ -0,0 +1,250 @@
+#!/usr/bin/env bash
+# =================================================================================================
+# new-peer.sh — enrol one device on the remote-access VPN (platform/vpn-ingress).
+#
+# Generates a WireGuard keypair, renders the device's client profile, prints a QR code for a phone,
+# and prints the one `[Peer]` stanza to paste into platform/vpn-ingress/peers.conf. The device's
+# private half is written to ONE 0600 file and nowhere else: not sent to the cluster, not committed,
+# never logged.
+#
+# RUN IT IN THE DEV CONTAINER — that is where the toolchain lives (CLAUDE.md §5):
+#
+#     ./infra/devcontainer/dev.sh run bash -c './infra/vpn-ingress/new-peer.sh pixel-8 2'
+#
+# It needs `wg` (wireguard-tools), `qrencode` and `sops`, all three baked into the image. It will
+# run on a host that happens to have them too, but the container is the supported way and the only
+# one that is reproducible.
+#
+# THE SERVER'S PUBLIC KEY IS DERIVED FROM THE ENCRYPTED FILE, not from a copy you keep lying around:
+# `sops -d` the private half out of platform/vpn-ingress/wg-server-key.sops.yaml and pipe it
+# straight into `wg pubkey`. The plaintext never touches disk and never reaches a terminal. (This
+# is why both tools being in ONE image matters — see the Containerfile comment.) Override with
+# WG_SERVER_PUBKEY or WG_SERVER_KEY_FILE if you are working off-tree.
+#
+# WHY A SCRIPT AND NOT A RUNBOOK STEP. Three of these fields are easy to get wrong in ways that are
+# either silently insecure or silently broken, and all three are mechanical:
+#   * AllowedIPs on the SERVER side must be a /32. On the server, AllowedIPs is simultaneously the
+#     cryptokey routing table AND the inbound source filter, so a /24 here lets one device spoof
+#     every other device's tunnel address.
+#   * PersistentKeepalive must be set on the CLIENT. Without it the NAT mapping at the client's end
+#     expires after ~30s of idle and nothing can reach the device until it speaks first — which
+#     presents as "the VPN works for a minute and then half-works".
+#   * The endpoint must be the DDNS name, never the current WAN IP (see --endpoint below).
+#
+# USAGE
+#   ./infra/vpn-ingress/new-peer.sh <device-name> <last-octet> [--split] [--out DIR]
+#
+#   <device-name>   short, lowercase, e.g. pixel-8, thinkpad, work-laptop. Used for the filename
+#                   and the comment that ties the key to a human-recognisable device.
+#   <last-octet>    2-254, the device's address inside WG_CLIENT_CIDR. Must be unused.
+#   --split         split tunnel: route ONLY the LAN and the tunnel subnet. Default is a FULL
+#                   tunnel (0.0.0.0/0) so the device also egresses the house WAN.
+#   --out DIR       where to write the profile. Default: `.cache/wg-peers/` in the repo, which is
+#                   GITIGNORED (`.gitignore` `.cache/`) and, unlike /tmp inside the container,
+#                   survives the container exiting — the repo is its only persistent read-write
+#                   mount, so a profile written anywhere else is gone before you can move it to a
+#                   desktop. The script refuses any destination git does not ignore.
+#
+# ENVIRONMENT
+#   WG_SERVER_PUBKEY    the server's public key, if you want to skip the SOPS decrypt entirely.
+#   WG_SERVER_KEY_FILE  a local copy of the server PRIVATE key to derive the public half from,
+#                       instead of reading the SOPS file.
+#   WG_SERVER_SOPS_FILE default platform/vpn-ingress/wg-server-key.sops.yaml
+#   WG_ENDPOINT_HOST    default wan.home.keithjackson.dev
+#   WG_CLIENT_CIDR      default 10.90.0.0/24   (must match clusters/base/cluster-vars.yaml)
+#   WG_LAN_CIDR         default 192.168.2.0/24 (prod LAN_CIDR)
+#   WG_DNS              default 192.168.2.23   (prod PIHOLE_DNS_VIP)
+#
+# REQUIRES: `wg`, `qrencode`, `sops` — all three in the dev container.
+# =================================================================================================
+set -euo pipefail
+
+die() { printf 'new-peer.sh: %s\n' "$*" >&2; exit 1; }
+
+REPO_ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/../.." && pwd)"
+PEERS_FILE="${REPO_ROOT}/platform/vpn-ingress/peers.conf"
+
+# --- defaults, each mirroring a value that is DECLARED elsewhere in this repo -------------------
+# These are duplicated here rather than parsed out of the YAML on purpose: this script is meant to
+# run on an operator's laptop with no checkout-shaped assumptions beyond its own location, and a
+# silent mis-parse would be worse than a visible default. If you change the knob, change it here.
+: "${WG_CLIENT_CIDR:=10.90.0.0/24}"                 # clusters/base/cluster-vars.yaml
+: "${WG_LAN_CIDR:=192.168.2.0/24}"                  # clusters/prod LAN_CIDR
+: "${WG_DNS:=192.168.2.23}"                         # clusters/prod PIHOLE_DNS_VIP
+: "${WG_SERVER_SOPS_FILE:=${REPO_ROOT}/platform/vpn-ingress/wg-server-key.sops.yaml}"
+# wan.<base-domain> is an UNPROXIED A record that platform/externaldns/ddns.yaml keeps pointed at
+# the current WAN IP (checked every 5 min). Use it, never a literal address: this house has a
+# DYNAMIC WAN IP, and a profile pinned to today's address stops working without warning and with no
+# symptom on the server side. It is a PUBLIC Cloudflare record, so it also resolves from a cellular
+# connection — unlike any `*.home.keithjackson.dev` name PiHole answers, which a remote client
+# cannot resolve until it is already connected.
+: "${WG_ENDPOINT_HOST:=wan.home.keithjackson.dev}"
+: "${WG_LISTEN_PORT:=51820}"
+: "${WG_MTU:=1420}"
+
+SPLIT=0
+OUT_DIR=""
+NAME=""
+OCTET=""
+while [ $# -gt 0 ]; do
+  case "$1" in
+    --split) SPLIT=1; shift ;;
+    --out)   OUT_DIR="${2:-}"; [ -n "$OUT_DIR" ] || die "--out needs a directory"; shift 2 ;;
+    -h|--help) sed -n '2,40p' "${BASH_SOURCE[0]}"; exit 0 ;;
+    -*) die "unknown option: $1" ;;
+    *) if [ -z "$NAME" ]; then NAME="$1"; elif [ -z "$OCTET" ]; then OCTET="$1"; else die "unexpected argument: $1"; fi; shift ;;
+  esac
+done
+
+[ -n "$NAME" ]  || die "need a device name. See --help"
+[ -n "$OCTET" ] || die "need a last octet (2-254). See --help"
+printf '%s' "$NAME" | grep -Eq '^[a-z0-9][a-z0-9-]{0,30}$' \
+  || die "device name must be lowercase letters/digits/hyphens: got '$NAME'"
+printf '%s' "$OCTET" | grep -Eq '^[0-9]+$' || die "octet must be a number: got '$OCTET'"
+[ "$OCTET" -ge 2 ] && [ "$OCTET" -le 254 ] || die "octet must be 2-254 (.1 is the server): got '$OCTET'"
+
+command -v wg >/dev/null || die "'wg' not on PATH. Run this inside the dev container:
+  ./infra/devcontainer/dev.sh run bash -c './infra/vpn-ingress/new-peer.sh $NAME $OCTET'"
+
+# --- the server's public key --------------------------------------------------------------------
+# Order: an explicit pubkey, then a local private-key file, then the SOPS file in the tree. The
+# last is the normal path and needs no local copy of anything.
+if [ -z "${WG_SERVER_PUBKEY:-}" ]; then
+  if [ -n "${WG_SERVER_KEY_FILE:-}" ]; then
+    [ -r "$WG_SERVER_KEY_FILE" ] || die "cannot read WG_SERVER_KEY_FILE '$WG_SERVER_KEY_FILE'"
+    WG_SERVER_PUBKEY="$(tr -d ' \r\n' < "$WG_SERVER_KEY_FILE" | wg pubkey)"
+  else
+    command -v sops >/dev/null || die "'sops' not on PATH. Run this inside the dev container (see --help)."
+    [ -r "$WG_SERVER_SOPS_FILE" ] || die "cannot read '$WG_SERVER_SOPS_FILE'"
+    # The decrypted private key goes straight into `wg pubkey` — never to a file, never to a tty.
+    # `wg pubkey` fails on the committed REPLACE-ME placeholder, which is the useful error here.
+    WG_SERVER_PUBKEY="$(sops -d --extract '["stringData"]["privatekey"]' "$WG_SERVER_SOPS_FILE" \
+                          | tr -d ' \r\n' | wg pubkey 2>/dev/null)" || WG_SERVER_PUBKEY=""
+    [ -n "$WG_SERVER_PUBKEY" ] || die "could not derive the server public key from
+  $WG_SERVER_SOPS_FILE
+  Either it still holds the REPLACE-ME placeholder (see runbooks/vpn-remote-access.md step 2),
+  or this shell cannot decrypt it (the age keyring is mounted at ~/.config/sops in the container)."
+  fi
+fi
+
+CLIENT_BASE="${WG_CLIENT_CIDR%/*}"; CLIENT_BASE="${CLIENT_BASE%.*}"
+CLIENT_ADDR="${CLIENT_BASE}.${OCTET}"
+
+# --- refuse a collision, because the failure is otherwise invisible -----------------------------
+# Two devices sharing an address does not error anywhere: the server routes that address to
+# whichever peer handshook most recently, so BOTH devices appear to work intermittently.
+# COMMENT LINES ARE NOT ALLOCATIONS. This used to grep the whole file and so matched the
+# COMMENTED-OUT EXAMPLE STANZA in the register, which made `.2` — the first address anyone would
+# ask for — permanently un-allocatable with a message claiming it was already taken. Strip
+# comments first: a real stanza's `AllowedIPs` line is never commented, while both the template
+# and every peer's `# <name> — <owner>` label are.
+# FAIL if the register is missing rather than skipping the check. The path was silently wrong once
+# (it still said peers.yaml after the file became peers.conf), and because the old guard was
+# `[ -r "$PEERS_FILE" ] && ...` the only symptom would have been duplicate detection quietly
+# never firing again — the exact silent-skip shape this repo treats as a defect.
+[ -r "$PEERS_FILE" ] || die "cannot read the peer register '$PEERS_FILE'.
+  Duplicate-address detection cannot run, so this script refuses to issue a profile."
+if grep -vE '^[[:space:]]*#' "$PEERS_FILE" | grep -q "AllowedIPs *= *${CLIENT_ADDR}/32"; then
+  die "${CLIENT_ADDR}/32 is already allocated in platform/vpn-ingress/peers.conf. Pick another octet."
+fi
+if grep -qi "^ *# *${NAME} " "$PEERS_FILE"; then
+  printf 'new-peer.sh: WARNING a peer comment already mentions "%s" in peers.conf.\n' "$NAME" >&2
+fi
+
+# --- output location: 0700, and never inside the repo -------------------------------------------
+[ -n "$OUT_DIR" ] || OUT_DIR="${REPO_ROOT}/.cache/wg-peers"
+mkdir -p "$OUT_DIR"
+chmod 700 "$OUT_DIR"
+OUT_ABS="$(cd "$OUT_DIR" && pwd)"
+# A profile holds a private key, so the destination must not be committable. Inside the repo that
+# means git must IGNORE it — test the real property rather than a proxy, because the repo is the
+# container's only persistent read-write mount and so the only sane place to write. Outside the
+# repo, anywhere goes.
+case "$OUT_ABS" in
+  "$REPO_ROOT"|"$REPO_ROOT"/*)
+    if ! git -C "$REPO_ROOT" check-ignore -q "$OUT_ABS/probe.conf" 2>/dev/null; then
+      die "refusing to write a private key to '$OUT_ABS': it is inside the git checkout and NOT
+  gitignored, so the profile would be committable. Use the default (.cache/wg-peers) or add an
+  ignore rule first. Verify with: git check-ignore -v <path>"
+    fi
+    ;;
+esac
+PROFILE="${OUT_DIR}/${NAME}.conf"
+
+umask 077
+PRIVKEY="$(wg genkey)"
+PUBKEY="$(printf '%s' "$PRIVKEY" | wg pubkey)"
+
+if [ "$SPLIT" -eq 1 ]; then
+  ALLOWED="${WG_LAN_CIDR}, ${WG_CLIENT_CIDR}"
+  TUNNEL_KIND="split tunnel (LAN only; the device keeps using its own internet)"
+else
+  ALLOWED="0.0.0.0/0"
+  TUNNEL_KIND="FULL tunnel (all IPv4 traffic egresses the house WAN)"
+fi
+
+cat > "$PROFILE" <<EOF
+# ${NAME} — remote-access VPN profile for home.keithjackson.dev
+# Generated $(date -u +%Y-%m-%dT%H:%M:%SZ) by infra/vpn-ingress/new-peer.sh
+# ${TUNNEL_KIND}
+#
+# THIS FILE CONTAINS A PRIVATE KEY. Move it to the device, then delete it from here.
+# It is the ONLY copy: the server never sees it and it cannot be recovered or re-derived.
+[Interface]
+PrivateKey = ${PRIVKEY}
+Address = ${CLIENT_ADDR}/32
+DNS = ${WG_DNS}
+MTU = ${WG_MTU}
+
+[Peer]
+PublicKey = ${WG_SERVER_PUBKEY}
+Endpoint = ${WG_ENDPOINT_HOST}:${WG_LISTEN_PORT}
+AllowedIPs = ${ALLOWED}
+# Hold the NAT mapping open from the client side. Required for the server to be able to reach the
+# device at all once it goes idle; harmless otherwise (one small packet every 25s).
+PersistentKeepalive = 25
+EOF
+chmod 600 "$PROFILE"
+
+cat <<EOF
+
+  Device      : ${NAME}
+  Address     : ${CLIENT_ADDR}/32
+  Routing     : ${TUNNEL_KIND}
+  DNS         : ${WG_DNS}  (PiHole — gives the device LAN answers for *.home.keithjackson.dev)
+  Profile     : ${PROFILE}   (0600; contains the private key)
+
+  ------------------------------------------------------------------------------------------
+  STEP 1 — append this to platform/vpn-ingress/peers.conf, then PR it:
+
+    # ${NAME} — <owner>, enrolled $(date -u +%Y-%m-%d)
+    [Peer]
+    PublicKey = ${PUBKEY}
+    AllowedIPs = ${CLIENT_ADDR}/32
+
+  Keep the comment line: \`wg show\` can only print the key, so it is the only record of which
+  stanza belongs to which device when one has to be revoked.
+
+  STEP 2 — get the profile onto the device:
+    Android / iOS  : scan the QR code below in the WireGuard app ("+" -> Scan from QR code)
+    Windows / macOS: WireGuard app -> "Import tunnel(s) from file" -> ${NAME}.conf
+    Linux          : install as /etc/wireguard/${NAME}.conf, then
+                     sudo systemctl enable --now wg-quick@${NAME}
+
+  STEP 3 — delete the profile from this machine once the device has it:
+    shred -u ${PROFILE} 2>/dev/null || rm -f ${PROFILE}
+
+  The tunnel will not work until the peers.conf PR is MERGED and Flux has rolled the DaemonSet
+  (~1 min). Until then the device handshakes and gets silence, exactly like an unknown key.
+  ------------------------------------------------------------------------------------------
+EOF
+
+if command -v qrencode >/dev/null; then
+  printf '  QR code (this IS the private key — your terminal scrollback now holds a credential):\n\n'
+  qrencode -t ansiutf8 < "$PROFILE"
+else
+  # Should not happen in the dev container: qrencode is baked into the image. Kept as a real
+  # fallback for a host run, rather than failing after the profile has already been written.
+  printf '  qrencode not on PATH, so no QR code was printed. It is in the dev container —\n'
+  printf '  rerun there, or transfer %s to the device by another route.\n' "$PROFILE"
+fi
@@ -199,7 +199,7 @@ data:
          "id": 15,
          "type": "timeseries",
          "title": "CAUSE 4 — NFS RPC retransmission ratio, per node",
-          "description": "node_nfs_rpc_retransmissions_total / node_nfs_rpcs_total, from /proc/net/rpc/nfs. Alert line at 1% (NodeNFSRetransmissionRateHigh). MEASURED BASELINE IS EXACTLY ZERO on all three nodes over 48h, including throughout the 2026-09-14 spike — so any visible line here means the export at 192.168.2.102, or the path to it, is dropping requests. A flat zero does NOT clear NFS: it only clears the TRANSPORT. A merely SLOW export needs per-mount RPC round-trip time, which arrives with the mountstats collector (see kube-prometheus-stack.yaml) and is the known gap recorded in runbooks/node-io.md.",
+          "description": "node_nfs_rpc_retransmissions_total / node_nfs_rpcs_total, from /proc/net/rpc/nfs. Alert line at 1% (NodeNFSRetransmissionRateHigh). MEASURED BASELINE IS EXACTLY ZERO on all three nodes over 48h, including throughout the 2026-09-14 spike — so any visible line here means the export at 192.168.2.30, or the path to it, is dropping requests. A flat zero does NOT clear NFS: it only clears the TRANSPORT. A merely SLOW export needs per-mount RPC round-trip time, which arrives with the mountstats collector (see kube-prometheus-stack.yaml) and is the known gap recorded in runbooks/node-io.md.",
          "gridPos": {"h": 8, "w": 12, "x": 12, "y": 39},
          "fieldConfig": {"defaults": {"unit": "percentunit", "min": 0, "custom": {"drawStyle": "line", "fillOpacity": 5, "thresholdsStyle": {"mode": "line"}}, "thresholds": {"mode": "absolute", "steps": [
            {"color": "green", "value": null}, {"color": "red", "value": 0.01}
@@ -22,6 +22,25 @@ requires.

 ---

+## Why the agent authenticates to Gitea with a local account and a PAT
+
+Not Keycloak, and that is a decision rather than an omission (operator, 2026-10-06): the
+agents only ever talk to Gitea, so a local Gitea account with a scoped personal access token
+is the whole requirement, and it is drastically simpler than federating a machine identity.
+
+It is also what Gitea can actually do. Keycloak service accounts were considered and are not
+available for this: Gitea's API accepts basic auth, PATs, SSH signatures and **its own**
+OAuth2 bearer tokens, and as an OAuth2 provider Gitea implements **only the Authorization
+Code Grant** — there is no client-credentials grant, and nothing in Gitea validates a token
+issued by a third-party OIDC provider. So a Keycloak service-account token cannot
+authenticate to Gitea's API or to git-over-HTTP at all. Keycloak remains what it is for human
+access: the browser login source registered on Gitea (`catalog/gitea.yaml`).
+
+What still matters, and is enforced by the hand-off rather than by Keycloak: **the account
+must not be an administrator** — `infra/gitea/approval-policy.json` authorises
+`/approve-override` on live repository permission alone, so an admin-permission bot could
+waive the sensitive-path human review on its own pull request.
+
 ## It does nothing at all until an operator does two things

 Both are deliberate, and both fail **visibly** rather than silently:
@@ -31,6 +50,36 @@ Both are deliberate, and both fail **visibly** rather than silently:
   `infra/agent/build-image.sh` (which verifies it and refuses to push), push it as the
   operator, then update **both** places with the digest `podman push --digestfile` returned,
   in one pull request. Until then: `ImagePullBackOff`.
+
+   **Two things have to be true before any digest will pull, and neither is declared in this
+   repository.** Both were measured after PR #57 merged — this service is the first workload
+   in the cluster ever to reference the in-cluster registry, so nothing had exercised the
+   path. Details and the exact commands:
+   [`decisions/2026-10-05-pm-agent-registry-pull-prereq.md`](../../decisions/2026-10-05-pm-agent-registry-pull-prereq.md).
+
+   - **The nodes resolve the registry hostname to the WAN, so the TLS they fail to verify is
+     the router's — DIAGNOSED 2026-10-06, and fixed in this change.** containerd pulls as a
+     *node* process, so it resolves through the node's public upstreams
+     (`node_baseline_dns_servers` = the LAN gateway) rather than through Pi-hole. The public
+     answer for every name in this zone is a CNAME to `wan.home.keithjackson.dev` — the WAN
+     IP — which this router does not hairpin; it answers :443 with its own placeholder
+     certificate `CN=%D` carrying **no extensions, therefore no SANs**, which is precisely
+     `x509: certificate is not valid for any names`. The Gateway, the wildcard certificate
+     and the digest were never implicated. The fix is the pin this repository already uses
+     for the Keycloak issuer, for the identical reason: `gitea.{{ k3s_base_domain }}` is now
+     in `node_baseline_hosts_pins` — node configuration is Ansible's, declared in the
+     inventory, never typed on a node. Apply it scoped to that one task:
+     `cd infra/ansible && ansible-playbook playbooks/node-baseline.yml -e k3s_hosts=k3s_prod
+     --tags hosts`.
+   - **The pull is still unauthenticated** once the node reaches the right endpoint. An
+     unauthenticated client gets nothing from this Gitea's registry, and there is no
+     `imagePullSecret` anywhere in the tree. Consistent with the agent credential decision
+     (local Gitea accounts with PATs), the fix is a `dockerconfigjson` for a local Gitea
+     account whose token carries `read:package`, referenced from the Deployment and the
+     committed worker Job template — not built yet, because minting that token is yours.
+
+   The same two apply to `conformance-runner`: same registry path, same push-then-pin model,
+   never pulled either.
 2. **The credentials are placeholders.** `pm-agent-credentials.sops.yaml` is encrypted to the
   repository's age recipient but holds `REPLACE-ME-…` strings. The hand-off —
   which Gitea account to create, which scopes, and why it must *not* be an administrator —
@@ -96,7 +145,7 @@ Job from a committed template. **The model's output is data, never a command.**
 | **cannot** | merge anything — the gate is the approver, and the service makes no merge call |
 | **cannot** | reach the Kubernetes API: no ServiceAccount token is mounted, the `pm-agent-worker` identity is bound to nothing, and the egress policy does not include the API server. `kubectl` is on its `PATH` (the gate's toolchain needs it) and is inert |
 | **cannot** | reach anything except this Gitea and tcp/443 — no package registry, no GitHub |
-| **cannot** | clone from or push to any host but this Gitea: `pm-worker` validates `PM_GITEA_URL` against an allowlist baked into the image |
+| **cannot** | clone from or push to anywhere but `gitea.gitea.svc.cluster.local:3000`: `pm-worker` validates `PM_GITEA_URL` against a one-entry allowlist baked into the image. In-cluster consumers reach a service by its cluster-local name — a different path by design from how a client outside the cluster reaches it — so the external hostname is not an accepted value |
 | **cannot** | authenticate a `git push` **during the model session**: `GIT_ASKPASS` is unset for its duration, so the restriction is structural rather than a request in a prompt |
 | **cannot** | be created in any shape but the committed one — see the admission policy |

@@ -51,6 +51,15 @@
 # (2) MINT THE GITEA TOKEN as that user (log in as `pm-agent`, or use the admin API to
 #     create a token for it): Settings -> Applications -> Generate New Token.
 #
+#     A LOCAL GITEA ACCOUNT WITH A PAT IS THE DECIDED MODEL (operator, 2026-10-06), not
+#     Keycloak. The agents only ever talk to Gitea, so this is the whole requirement and it
+#     is far simpler than federating a machine identity. It is also the only thing that
+#     works: Gitea's API accepts basic auth, PATs, SSH signatures and its OWN OAuth2 bearer
+#     tokens, and as a provider Gitea implements only the Authorization Code Grant — no
+#     client-credentials grant, and nothing that validates a third-party OIDC token. A
+#     Keycloak service-account token therefore cannot authenticate to Gitea's API or to
+#     git-over-HTTP. Do not "upgrade" this to Keycloak without re-reading that.
+#
 #       Scopes: `write:repository` and `write:issue`. Nothing else — in particular NOT
 #       `write:admin`, NOT `write:organization`, NOT `write:user`.
 #
@@ -0,0 +1,224 @@
+# platform/vpn-ingress — WireGuard remote access (north-south INGRESS)
+
+Lets the operator's own devices — Android, Linux, Windows, macOS, iOS — dial in from anywhere on
+the internet and behave as though plugged into the home LAN: full reach to `192.168.2.0/24` and
+egress out the house WAN.
+
+> **This is not `platform/vpn-egress`.** They are opposite directions and share nothing but the
+> word "VPN". `vpn-egress` pushes *pods out* to the internet through a PIA tunnel (ADR-0015,
+> R-NET-05/06/07). This component lets *remote clients in*. Changing one never affects the other.
+
+| | |
+|---|---|
+| Transport | WireGuard, **udp/51820**, kernel implementation |
+| Where it runs | `hostNetwork` **DaemonSet** — one warm listener on every node |
+| Client subnet | `${WG_CLIENT_CIDR}` = `10.90.0.0/24`; `.1` is the server, `.2`–`.254` devices |
+| Authorisation | a device's **public key** is in [`peers.conf`](./peers.conf), or it cannot connect |
+| The one secret | the server's private key — **SOPS-encrypted in this tree**, `wg-server-key.sops.yaml` |
+| Exposure | one hand-made WAN port-forward on the SOHO router, off-repo |
+| Enrolling a device | [`infra/vpn-ingress/new-peer.sh`](../../infra/vpn-ingress/new-peer.sh) |
+| Procedure / bring-up | [`runbooks/vpn-remote-access.md`](../../runbooks/vpn-remote-access.md) |
+
+## Why WireGuard
+
+The requirement names four client platforms. WireGuard is the only option that has a *first-party*
+client on all of them (official apps for Android, iOS, Windows and macOS; in-kernel on Linux since
+5.6, so a Linux client needs no userspace daemon at all). It is also the smallest thing to expose:
+one UDP port, no cipher negotiation, no PKI, no user database, no TLS stack.
+
+OpenVPN would have needed a CA, per-device certificates and a revocation list — three pieces of
+long-lived state this repo would then have to protect and rotate. IKEv2/IPsec has native clients but
+is painful to run in a container and brittle behind double NAT. Neither buys anything here.
+
+### Why this is safe to expose to the whole internet
+
+The honest answer is not "because it is encrypted" — it is the handshake's failure mode:
+
+**An unauthenticated packet gets no reply at all.** WireGuard's first handshake message carries a
+MAC keyed with the *responder's own public key*. If the sender does not already know it, the packet
+is dropped silently — no error, no reset, no banner, nothing a scanner can fingerprint. From the
+outside, udp/51820 is indistinguishable from a closed port. There is no login prompt to brute-force,
+no version string to match against a CVE, and no amplification to abuse.
+
+That is the whole security argument, and it is why the exposed port carries no IP allowlist (which
+would also have made roaming clients unusable — a phone's address changes with every cell tower).
+Compare `apps/wave-0/pihole-dns.yaml`, which *does* pin `loadBalancerSourceRanges` to the LAN: a
+resolver answers anybody, so it must be scoped by address. WireGuard answers nobody.
+
+What it does **not** protect against is a stolen device — anyone holding a device's private key
+*is* that device. That is what revocation is for: delete the stanza, merge, done (~1 min).
+
+## Architecture, and the one decision that drives everything
+
+```
+  phone on 5G                    SOHO router                 k3s-prod-N (host netns)
+ ┌──────────────┐  udp/51820   ┌───────────────┐  forward   ┌────────────────────────────┐
+ │ WireGuard app│─────────────▶│ WAN 51820 ──▶ │───────────▶│ wg0 10.90.0.1/24           │
+ │ 10.90.0.2/32 │   over the   │ node IP:51820 │            │   decrypt, then FORWARD    │
+ └──────────────┘   internet   └───────────────┘            │   SNAT to the node's addr  │
+                                                            └─────────────┬──────────────┘
+                                                                          │ as `host`/`remote-node`
+                                        ┌─────────────────────────────────┼──────────────────────┐
+                                        ▼                                 ▼                      ▼
+                               LAN 192.168.2.0/24            Gateway VIP .20 (16 web UIs)   WAN / internet
+                               (NAS, router, printers)        PiHole DNS VIP .23
+```
+
+### `hostNetwork: true` is required, not convenient
+
+This is the only genuinely interesting decision in the component, and it was forced by a *measured*
+property of this cluster rather than chosen for convenience.
+
+In Cilium, what a packet may reach is decided by the **security identity of its source**. A
+WireGuard server running as an ordinary pod must SNAT client traffic to its own pod IP (Cilium drops
+a packet whose source is not the endpoint's own address), so every remote client would have arrived
+everywhere wearing *that pod's* identity. On 2026-10-04 this cluster measured what that costs
+(`decisions/2026-10-04-plex-advertise-plexdirect.md`): a request to the shared Gateway VIP **from
+inside a pod returns `403 Access denied` from Envoy for all 16 Gateway hostnames**, because Cilium's
+Gateway preserves the original source identity and enforces the *destination's* ingress policy —
+and every app admits `reserved:ingress` plus named peers, never an arbitrary pod. LAN browsers work
+only because they arrive as `reserved:world` / `reserved:host`.
+
+So the pod-networked version of this component would have produced a tunnel that came up healthy,
+reported connected peers, routed packets — and 403'd **every single cluster web UI**: plex, gitea,
+keycloak, nextcloud, grafana, headlamp, the apex. `*.home.keithjackson.dev` would not even have
+resolved, because `apps/wave-0/pihole-dns.yaml`'s ingress policy deliberately omits the `cluster`
+entity. A VPN that looks up and is useless is the worst available outcome, and nothing in the
+manifests would have hinted at it.
+
+In the **host** netns there is no pod identity to carry. Forwarded client traffic is SNATed to the
+node's own address, so it reaches the Gateway, PiHole and every LAN host as `host`/`remote-node` —
+byte-for-byte what a LAN client looks like. Three further problems vanish with it:
+
+* `net.ipv4.ip_forward` is **already 1** on these nodes (`node_baseline` writes
+  `/etc/sysctl.d/99-k3s-cilium.conf`). It is *not* in the kubelet's safe-sysctl allowlist, so a
+  pod-netns build would have needed `--allowed-unsafe-sysctls` on all three kubelets — a
+  node-restart change to the k3s service, to run a VPN.
+* **No LoadBalancer VIP**, so no `CiliumL2AnnouncementPolicy` lease lottery (the backend-blind
+  announcer that cost this LAN an 8-day Minecraft outage — see
+  `conformance/tests/l0-static/l2-announced-vips-serve-from-any-node`) and no
+  `externalTrafficPolicy` trade-off to make at all.
+* **No double encapsulation.** Client UDP lands on the node's own NIC, so the underlay is a flat
+  1500-byte path, not Cilium's 1450-byte VXLAN. That is what makes `MTU = 1420` simply correct.
+
+`hostNetwork` is *permitted* here, and not by oversight:
+`platform/kyverno/policies/restrict-host-namespaces.yaml` matches `namespaceSelector:
+app-namespace=true` only, and names this exact carve-out in its own comment — "platform components
+that do … e.g. Cilium, node-exporter … live in platform namespaces that do NOT carry the
+app-namespace label". [`namespace.yaml`](./namespace.yaml) is deliberately unlabelled.
+
+**The cost, stated rather than buried:** a `hostNetwork` pod has no Cilium endpoint, so **no
+NetworkPolicy constrains this workload** — not [`networkpolicy.yaml`](./networkpolicy.yaml), not
+anything. That file says so at length instead of implying a protection it cannot provide. The
+boundary around this port is WireGuard's peer authentication, full stop.
+
+### Why a DaemonSet
+
+The WAN forward names **one node address**, by hand, off-repo (same shape as the plex tcp/32400
+forward). A single-replica Deployment would float on every reschedule and silently invalidate it.
+A DaemonSet instead puts an identical listener on all three nodes — every node answers the same
+keys — so **losing the forwarded node is a one-line router change**, with no cluster work and no
+re-issued client profiles. The two idle listeners cost ~15 MiB each.
+
+A pinned `LoadBalancer` VIP was the considered alternative (it would make the forward immune to node
+replacement). Rejected: it reintroduces the L2-announcement lease, SNAT, and an extra node-to-node
+hop into the one path whose failure mode is *"I am away from home and cannot get in"*. Fewer
+translations win here.
+
+### The split that keeps authorisation reviewable
+
+| half | where | why |
+|---|---|---|
+| peer **public** keys + addresses | [`peers.conf`](./peers.conf), **plaintext in git**, as a content-hashed `configMapGenerator` so an edit rolls the pods | a public key grants nothing by itself, and this makes *"who can get into my house"* a reviewable PR diff with `git log` as its audit trail |
+| the server's **private** key | `wg-server-key.sops.yaml`, **SOPS-encrypted in git** | the only real secret (R-SEC-01, spec docs/07). Ships with a `REPLACE-ME` placeholder: an agent must not mint a long-lived private key (CLAUDE.md §6), so the operator `sops set`s it in |
+
+The two are joined only at pod start, by the init container, into a **`medium: Memory` emptyDir** —
+so the assembled config holding the private key never touches any node's disk and dies with the pod.
+
+Both halves are therefore in git, which is the point: a cluster rebuild restores the server key with
+everything else. An out-of-band `kubectl create secret` — the first shape this component shipped in,
+corrected after review — would have put the one credential every enrolled device depends on *outside*
+the GitOps tree, and losing it means re-enrolling every device, because each client profile pins this
+key's public half.
+
+Encrypting the peer register would have hidden exactly the change a reviewer most needs to see: a
+new line granting a new device access to the whole LAN.
+
+## What a client can reach — and how to narrow it
+
+By design, **everything a LAN machine can reach**: all of `192.168.2.0/24`, the shared Gateway's 16
+hostnames, PiHole, the NAS, the router's admin UI, and the internet via the house WAN.
+
+**That includes the three k3s nodes themselves** — `192.168.2.10/.11/.12`, and therefore the
+kube-apiserver on 6443, kubelet on 10250 and SSH on 22. An enrolled device is as privileged as a
+machine sitting in the house, which is what "reach the entire local network" asks for; it is
+recorded here because it is the largest consequence of saying yes to that, and because nobody should
+discover it later. **It is also why a lost device must be revoked promptly** (delete its stanza,
+merge; ~1 min to take effect).
+
+To grant less, narrow it at the **client** profile first — `new-peer.sh --split` emits a
+split-tunnel profile routing only the LAN and the tunnel subnet, so the device keeps its own
+internet path. To enforce less *server-side*, add filtering to the `PostUp` chain in
+[`daemonset.yaml`](./daemonset.yaml) (e.g. `iptables -A FORWARD -i wg0 -d 192.168.2.10 -j DROP`
+before the accept rules) — the FORWARD chain there is the only enforcement point, since no
+NetworkPolicy applies.
+
+## Operating it
+
+* **Enrol a device:** `./infra/vpn-ingress/new-peer.sh <name> <octet>` → paste the printed `[Peer]`
+  stanza into `peers.conf` → PR → merge. Phones scan a QR code; desktops import a `.conf`.
+* **Revoke a device:** delete its stanza from `peers.conf` → PR → merge. No other step; the key
+  stops working as soon as the pods roll (the generator's content hash guarantees they do).
+* **Is it up?** `kubectl --context k3s-prod -n vpn-ingress get ds wireguard` — three Ready.
+* **Who is connected?** `kubectl --context k3s-prod -n vpn-ingress exec ds/wireguard -- wg show`
+  (`latest handshake` under ~3 min means live). Never dump `wg showconf` — it prints the private key.
+* **Full bring-up and verification:** `runbooks/vpn-remote-access.md`.
+
+## Measured on prod, 2026-10-06 — what is now known rather than assumed
+
+The first real reconcile settled four things this component's design rested on. Three went the
+right way; one was a defect in my own manifest.
+
+| question | answer |
+|---|---|
+| Does the **kernel module** reach the pod? | **Yes.** `ip link add dev wg0 type wireguard` succeeds, and `/proc/modules` lists `wireguard`, after the `node_baseline` run. `CAP_SYS_MODULE` is correctly not needed. |
+| Does `allowPrivilegeEscalation: false` break the image's **s6 init**? | **No.** The container reaches `wg-quick` normally. The flag stays. |
+| Is the image's **iptables** backend compatible with the host's? | **Yes — both nft.** The image ships `iptables v1.8.13 (nf_tables)` via `xtables-nft-multi`, and Debian 13 is nf_tables. This was the documented worst fear (rules silently landing in a table the kernel does not consult); it is closed. |
+| Can the pod set **`net.ipv4.ip_forward`**? | **No, and it must not try.** `/proc/sys` is mounted **read-only** under `hostNetwork` (`proc /proc/sys proc ro,…`), because those are the host's globals; `sysctl -w` fails with EPERM whatever the capabilities. A failed `PostUp` is fatal to `wg-quick`, so this one line took the whole tunnel down. The node already has it set to `1`; the init container now **verifies** rather than writes. |
+
+## Prerequisites outside this directory
+
+1. **The `wireguard` kernel module on every node.** Added to `node_baseline_kernel_modules`
+   (`infra/ansible/roles/node_baseline/defaults/main.yml`); the operator runs the role. The pod has
+   `NET_ADMIN` but deliberately **not** `SYS_MODULE`, so it cannot load the module itself — it
+   CrashLoops with a clear `wg-quick` error instead of quietly degrading to userspace WireGuard.
+2. **The server private key.** `wg-server-key.sops.yaml` is committed, encrypted, with a
+   `REPLACE-ME` placeholder, and both overlays already carry its decryption patch — so the wiring
+   is complete and the only outstanding act is replacing the value (runbook step 2). Until then the
+   DaemonSet CrashLoops with an explicit FATAL naming the file: the init container validates the
+   value with `wg pubkey`, which rejects the placeholder, an empty value, a public key pasted by
+   mistake, **and** a Secret that arrived as undecrypted `ENC[...]` ciphertext. That last case is
+   the one worth having a guard for — a missing overlay decryption patch applies cleanly and leaves
+   every Flux condition green.
+3. **The WAN port-forward**, udp/51820 → one node address. Hand-made on the SOHO router, off-repo,
+   and the half CI can never check.
+
+## Not built (deliberate, with reasons)
+
+* **No metrics / no peer-level alerting.** A WireGuard exporter would expose
+  `wireguard_latest_handshake_seconds` per peer — genuinely useful for spotting unexpected
+  activity — but it needs a second `NET_ADMIN` container in the pod that terminates the
+  internet-facing tunnel, and that trade was not worth making unverified. Pod-down is already
+  covered generically by `KubeDeploymentReplicasMismatch`/`KubePodNotReady` from
+  kube-prometheus-stack. **This is the top follow-up.**
+* **No preshared keys.** They would add a symmetric post-quantum hedge on top of the Noise
+  handshake — and would be a real secret, forcing `peers.conf` into SOPS and costing the
+  reviewability above. Revisit only if the threat model changes; if it does, the PSK belongs in the
+  `wg-server-key` Secret.
+* **No IPv6.** The server offers no IPv6 tunnel address, so a full-tunnel client with native IPv6
+  still reaches IPv6 sites *outside* the tunnel. Functionally harmless, a privacy leak if the point
+  was to hide the client's network. Fix is an `fd..` ULA on `wg0` plus `::/0` in the client's
+  `AllowedIPs`; not done because nothing here needs it.
+* **No in-cluster-service reach beyond what the LAN has.** Clients reach cluster apps the way a LAN
+  browser does — through the Gateway VIP. Pod IPs and `10.43.0.0/16` service IPs are not routed
+  into the tunnel.
@@ -0,0 +1,372 @@
+---
+# =================================================================================================
+# WireGuard remote-access listener — udp/51820 in the HOST network namespace, on every node.
+# =================================================================================================
+# WHY WireGuard AND NOT OpenVPN/IPsec. The requirement is "Android, Linux, Windows and other
+# computing clients", from anywhere on the internet, securely. WireGuard is the only option here
+# with a first-party client on all four platforms (official apps for Android/iOS/Windows/macOS, and
+# in-kernel on Linux since 5.6 — so Linux clients need no userspace daemon at all). It is also the
+# smallest attack surface of the three: one UDP port, ~4k lines of kernel code, no cipher
+# negotiation, no PKI, no user database, and — the property that actually matters for a port
+# exposed to the whole internet — it NEVER REPLIES to an unauthenticated packet. See README.
+#
+# -------------------------------------------------------------------------------------------------
+# hostNetwork: true — REQUIRED, not convenient. This is THE decision in this file.
+# -------------------------------------------------------------------------------------------------
+# A VPN client must behave like a machine plugged into the LAN. In Cilium, what a packet is ALLOWED
+# to reach is decided by the SECURITY IDENTITY of its source, and after any in-pod SNAT that
+# identity is the VPN pod's — not `world`. That distinction is not academic; it was MEASURED on
+# this cluster on 2026-10-04 (decisions/2026-10-04-plex-advertise-plexdirect.md): a curl of the
+# shared Gateway VIP from inside a pod returns `403 Access denied` from Envoy for **all 16**
+# Gateway hostnames, because Cilium's Gateway preserves the original source identity and enforces
+# the DESTINATION's ingress CiliumNetworkPolicy, and every app admits `reserved:ingress` plus named
+# peers — never an arbitrary pod. LAN browsers are allowed only because they arrive as
+# `reserved:world` / `reserved:host`.
+#
+# So a pod-networked WireGuard server would have handed remote clients a tunnel on which every
+# single cluster web UI returned 403 — plex, gitea, keycloak, nextcloud, grafana, headlamp, the
+# apex, all of them — while `wg show` reported a perfectly healthy tunnel. PiHole would have failed
+# the same way and worse: apps/wave-0/pihole-dns.yaml's ingress policy deliberately OMITS the
+# `cluster` entity, so VPN clients would not have been able to resolve `*.${BASE_DOMAIN}` either.
+# The VPN would have looked up and been useless, which is the worst failure shape available.
+#
+# In the host netns there is no pod identity to carry: forwarded client traffic is SNATed to the
+# NODE's address, so it reaches the Gateway, PiHole and every LAN host as `host`/`remote-node` —
+# exactly what a LAN client looks like. Three further problems disappear with it:
+#   * net.ipv4.ip_forward is ALREADY 1 on these nodes (node_baseline writes it to
+#     /etc/sysctl.d/99-k3s-cilium.conf), so no pod sysctl is needed — and `net.ipv4.ip_forward`
+#     is NOT in the kubelet's safe-sysctl allowlist, so a pod-netns version of this would have
+#     required `--allowed-unsafe-sysctls` on all three kubelets (a node-restart change).
+#     COROLLARY LEARNED THE HARD WAY (prod, 2026-10-06): this pod must not merely avoid NEEDING
+#     the sysctl, it must not ATTEMPT it. hostNetwork implies /proc/sys is mounted read-only, so
+#     `sysctl -w` fails with EPERM regardless of capabilities, and wg-quick treats a failed PostUp
+#     as fatal and deletes the interface. Verify the value; never write it.
+#   * no LoadBalancer VIP, so no CiliumL2AnnouncementPolicy lease lottery (the defect that cost
+#     this LAN an 8-day Minecraft outage) and no `externalTrafficPolicy` trade-off at all.
+#   * no double encapsulation. WireGuard's UDP lands on the node's own NIC, so the underlay is a
+#     flat 1500-byte LAN path, not Cilium's 1450-byte VXLAN.
+#
+# hostNetwork is PERMITTED here, and not by accident: platform/kyverno/policies/
+# restrict-host-namespaces.yaml matches `namespaceSelector: app-namespace=true` only, and names
+# this exact carve-out in its own comment ("platform components that do -- e.g. Cilium,
+# node-exporter -- live in platform namespaces that do NOT carry the app-namespace label").
+# namespace.yaml is deliberately unlabelled. THE COST IS REAL AND IS STATED: a hostNetwork pod
+# bypasses the Cilium datapath, so NO NetworkPolicy constrains this workload (see
+# networkpolicy.yaml, which says so rather than pretending otherwise). The boundary protecting
+# this port is WireGuard's own cryptographic peer authentication, not the CNI.
+#
+# -------------------------------------------------------------------------------------------------
+# A DaemonSet, not a single-replica Deployment.
+# -------------------------------------------------------------------------------------------------
+# The WAN port-forward on the SOHO router points at ONE node address, by hand, off-repo (same shape
+# as the plex tcp/32400 forward — runbooks/plex-remote-access.md). A Deployment would float to
+# whichever node the scheduler picked and silently invalidate that forward on every reschedule. A
+# DaemonSet instead puts an identical warm listener on ALL THREE nodes: the forward names one of
+# them, and if that node is lost, FAILOVER IS A ONE-LINE ROUTER CHANGE with no cluster work and no
+# new client profiles — every node answers the same keys. Each node binds udp/51820 in its own
+# netns, so there is no conflict, and the two idle listeners cost ~15 MiB each.
+#
+# All three nodes carry no taints (measured 2026-10-05), so no tolerations are needed for the
+# DaemonSet to cover the cluster; add them if a node is ever tainted.
+apiVersion: apps/v1
+kind: DaemonSet
+metadata:
+  name: wireguard
+  namespace: vpn-ingress
+  labels:
+    app.kubernetes.io/name: vpn-ingress
+spec:
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: vpn-ingress
+  # One node at a time, so a rollout never takes every listener down at once. The node named by the
+  # router's forward does drop for a few seconds during its own replacement; clients re-handshake
+  # automatically (WireGuard retries every 5s, and rekeys every 2 minutes regardless).
+  updateStrategy:
+    type: RollingUpdate
+    rollingUpdate:
+      maxUnavailable: 1
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/name: vpn-ingress
+        # Declared for documentation and for symmetry with the app tier. It MUST be `internet`, and
+        # the value is load-bearing rather than cosmetic: platform/vpn-egress/egress-steering.yaml's
+        # CiliumEgressGatewayPolicy selects `egress-class: vpn` pods CLUSTER-WIDE, with no namespace
+        # scope. Setting `vpn` here would steer every remote client's internet traffic out the PIA
+        # tunnel instead of the house WAN — the opposite of the requirement, and it would look like
+        # a working VPN with a mysterious foreign exit IP. (The selector matches on the pod label,
+        # so hostNetwork does not exempt this pod from being selected.)
+        homelab.keithjackson.dev/egress-class: internet
+        # WireGuard authenticates its own peers by public key; there is no UI and no IdP hop.
+        homelab.keithjackson.dev/auth-mode: native
+    spec:
+      # See the long rationale at the head of this file. ClusterFirstWithHostNet keeps in-cluster
+      # DNS working for the pod itself despite hostNetwork (without it the pod inherits the NODE's
+      # resolv.conf, which points at public resolvers).
+      hostNetwork: true
+      dnsPolicy: ClusterFirstWithHostNet
+      automountServiceAccountToken: false
+      # ── Assemble the running config: PUBLIC peer register (git) + PRIVATE server key (Secret) ──
+      # The two halves are deliberately stored apart (peers.conf explains why) and are only ever
+      # joined here, at pod start, into a tmpfs that is destroyed with the pod. The server's private
+      # key is therefore never written to any node's disk, never committed, and never logged.
+      initContainers:
+        - name: assemble-config
+          image: lscr.io/linuxserver/wireguard:1.0.20260223-r0-ls124
+          imagePullPolicy: IfNotPresent
+          # POSIX sh. Note on $ handling: this script is rendered through Flux's envsubst (the
+          # `vpn-ingress` Kustomization declares postBuild.substituteFrom), so `${WG_CLIENT_CIDR}`
+          # below IS substituted on purpose — it is a declared cluster-vars knob. Every SHELL
+          # variable is written bare (`$net`, `$(cmd)`), which envsubst leaves untouched. There is
+          # deliberately NO braced shell-variable form anywhere in here: braces are what envsubst
+          # consumes, so a shell variable written that way silently renders to the empty string.
+          # (ci: flux-postbuild-substitution enforces this, and caught this very comment when it
+          # first spelled the hazard out literally — the check reads comments too, correctly.)
+          command:
+            - /bin/sh
+            - -c
+            - |
+              set -eu
+              umask 077
+              mkdir -p /config/wg_confs
+
+              # Derive the server's own tunnel address from the single CIDR knob, so there is no
+              # second knob to keep in agreement: 10.90.0.0/24 -> 10.90.0.1/24.
+              net=${WG_CLIENT_CIDR}
+              mask=$(echo "$net" | cut -d/ -f2)
+              base=$(echo "$net" | cut -d/ -f1 | cut -d. -f1-3)
+
+              # The key arrives as a Secret file; strip any trailing newline the operator's shell
+              # added, or wg-quick rejects the config with "Key is not the correct length or format".
+              key=$(tr -d ' \r\n' < /run/wg-server-key/privatekey)
+              # VALIDATE, don't just check for empty. The Secret ships committed with a REPLACE-ME
+              # placeholder so the GitOps wiring is complete before the key exists, so the common
+              # failure is a value that is present and WRONG — a placeholder, a public key pasted by
+              # mistake, or a SOPS document that reached the cluster undecrypted (ENC[...], which
+              # happens if an overlay is missing its `vpn-ingress` decryption patch). `wg pubkey`
+              # accepts a value only if it is a real 32-byte curve25519 private key, so it rejects
+              # all four. Without this the bad value would be written into wg0.conf and the pod would
+              # fail later and less legibly, or come up with a server nobody can handshake with.
+              if ! printf '%s' "$key" | wg pubkey >/dev/null 2>&1; then
+                echo "FATAL: the server private key in Secret 'wg-server-key' is not a valid" >&2
+                echo "       WireGuard private key (wg pubkey rejected it)." >&2
+                if [ -z "$key" ]; then
+                  echo "       It is EMPTY." >&2
+                elif [ "$key" = "REPLACE-ME" ]; then
+                  echo "       It is still the committed REPLACE-ME PLACEHOLDER — the key has not" >&2
+                  echo "       been generated yet. This is the expected state on a fresh install." >&2
+                else
+                  # `case`, NOT a dollar-brace prefix-strip. This manifest is rendered through
+                  # envsubst, which consumes every dollar-brace expansion it sees, so a shell
+                  # parameter expansion here renders to the empty string and silently disables this
+                  # very branch. `case` uses no braces, so there is nothing to escape.
+                  # (ci: flux-postbuild-substitution caught both the original expansion AND the
+                  # first version of this comment, which spelled the hazard out literally.)
+                  case "$key" in
+                    ENC\[*)
+                      echo "       It is still SOPS CIPHERTEXT (starts with ENC[). The Secret" >&2
+                      echo "       reached the cluster undecrypted — check that this environment's" >&2
+                      echo "       overlay carries the 'vpn-ingress' decryption patch." >&2
+                      ;;
+                  esac
+                fi
+                echo "       Fix: runbooks/vpn-remote-access.md step 2." >&2
+                exit 1
+              fi
+
+              # The pod shares the HOST netns, so this reads the node's real setting. Reading
+              # /proc/sys is permitted even though writing is not (see the PostUp note below).
+              # Fail closed: a tunnel that comes up but cannot forward would look healthy to every
+              # probe here and simply drop every client's traffic.
+              if ! grep -qx 1 /proc/sys/net/ipv4/ip_forward; then
+                echo "FATAL: net.ipv4.ip_forward is 0 on this node, so forwarded VPN traffic would" >&2
+                echo "       be dropped. This pod CANNOT set it: with hostNetwork the runtime mounts" >&2
+                echo "       /proc/sys read-only, because it is the host's global setting." >&2
+                echo "       Fix on the NODE: run the node_baseline role (it writes" >&2
+                echo "       /etc/sysctl.d/99-k3s-cilium.conf) — runbooks/vpn-remote-access.md step 1." >&2
+                exit 1
+              fi
+
+              {
+                echo '[Interface]'
+                echo "Address = $base.1/$mask"
+                echo 'ListenPort = 51820'
+                # 1420 = 1500 (flat LAN/WAN path to the node's own NIC) - 60 bytes of WireGuard
+                # encapsulation (20 IPv4 + 8 UDP + 32 WireGuard). This is also what wg-quick would
+                # auto-derive, but it is pinned because the symptom of getting it wrong is the
+                # nastiest kind: handshakes and SSH work while large packets (HTTPS, file copies)
+                # hang. Inner packets stay under Cilium's 1450-byte VXLAN MTU too, so reaching a
+                # cluster pod does not fragment either.
+                echo 'MTU = 1420'
+                printf 'PrivateKey = %s\n' "$key"
+                # ── Forwarding + SNAT, applied in the HOST netns when wg0 comes up ──
+                # NO `sysctl -w net.ipv4.ip_forward=1` HERE. It is IMPOSSIBLE from this pod and it was
+                # the only thing stopping the tunnel coming up — MEASURED on prod 2026-10-06:
+                #     [#] sysctl -q -w net.ipv4.ip_forward=1
+                #     sysctl: permission denied on key "net.ipv4.ip_forward"
+                #     [#] ip link delete dev wg0
+                # and wg-quick then tore the whole tunnel down. The cause is not a missing
+                # capability: with `hostNetwork: true` the runtime mounts /proc/sys READ-ONLY in the
+                # container (confirmed in /proc/mounts: `proc /proc/sys proc ro,...`), precisely
+                # because those sysctls are the HOST's globals and a container must not rewrite
+                # them. CAP_NET_ADMIN does not and cannot lift a read-only mount.
+                # It was never needed anyway: node_baseline writes net.ipv4.ip_forward=1 to
+                # /etc/sysctl.d/99-k3s-cilium.conf, and reading it from this pod returns 1. The
+                # init container now VERIFIES that (a read, which /proc/sys does allow) and fails
+                # closed with a pointed message, which is what the write was pretending to achieve.
+                # SNAT client traffic to the node's address. REQUIRED: without it a LAN host would
+                # reply to 10.90.0.x, find no route, hand the packet to the router, and the router
+                # would drop it — so every connection would hang rather than fail. Matching on
+                # `! -o wg0` rather than a named `-o eth0` keeps this independent of the node's NIC
+                # name. Each rule is add-if-absent so a pod killed without PostDown does not
+                # accumulate duplicates in the host's tables across restarts.
+                echo "PostUp = iptables -t nat -C POSTROUTING -s $net ! -o wg0 -j MASQUERADE 2>/dev/null || iptables -t nat -A POSTROUTING -s $net ! -o wg0 -j MASQUERADE"
+                echo 'PostUp = iptables -C FORWARD -i wg0 -j ACCEPT 2>/dev/null || iptables -A FORWARD -i wg0 -j ACCEPT'
+                echo 'PostUp = iptables -C FORWARD -o wg0 -j ACCEPT 2>/dev/null || iptables -A FORWARD -o wg0 -j ACCEPT'
+                echo "PostDown = iptables -t nat -D POSTROUTING -s $net ! -o wg0 -j MASQUERADE 2>/dev/null || true"
+                echo 'PostDown = iptables -D FORWARD -i wg0 -j ACCEPT 2>/dev/null || true'
+                echo 'PostDown = iptables -D FORWARD -o wg0 -j ACCEPT 2>/dev/null || true'
+                echo ''
+              } > /config/wg_confs/wg0.conf
+
+              cat /run/wg-peers/peers.conf >> /config/wg_confs/wg0.conf
+              chmod 600 /config/wg_confs/wg0.conf
+
+              # Report the SHAPE of the result, never its content — the file now holds the server's
+              # private key, and a log line is a transcript (CLAUDE.md §6).
+              echo "wg0.conf assembled: $(grep -c '^\[Peer\]' /config/wg_confs/wg0.conf || true) peer(s), server $base.1/$mask, udp/51820."
+          securityContext:
+            runAsUser: 0
+            allowPrivilegeEscalation: false
+            capabilities:
+              drop:
+                - ALL
+          resources:
+            requests:
+              cpu: 10m
+              memory: 16Mi
+            limits:
+              memory: 64Mi
+          volumeMounts:
+            - { name: wg-config, mountPath: /config }
+            - { name: wg-server-key, mountPath: /run/wg-server-key, readOnly: true }
+            - { name: wg-peers, mountPath: /run/wg-peers, readOnly: true }
+      containers:
+        - name: wireguard
+          # linuxserver/wireguard — provides wg, wg-quick and iptables on a maintained, multi-arch
+          # base. Pinned to the full upstream+build tag (1.0.20260223, published 2026-10-01) rather
+          # than `latest`, per the crafty/oauth2-proxy convention; Renovate maintains it.
+          #
+          # NO `PEERS` ENV IS SET, DELIBERATELY. With PEERS the image runs in "server mode" and
+          # GENERATES keypairs at runtime — which would put the authoritative peer list on a
+          # container filesystem instead of in git, and (worse) print client private keys and QR
+          # codes into the POD LOG, where they would be readable by anyone with log access and
+          # shipped to Loki. Supplying our own /config/wg_confs/wg0.conf selects the image's
+          # bring-up-what-you-are-given path instead.
+          image: lscr.io/linuxserver/wireguard:1.0.20260223-r0-ls124
+          imagePullPolicy: IfNotPresent
+          env:
+            - name: TZ
+              value: "America/Chicago"
+          ports:
+            # hostNetwork, so containerPort IS the node port. Declared for documentation and so
+            # `kubectl get pod -o wide` shows what this listener owns.
+            - { name: wireguard, containerPort: 51820, hostPort: 51820, protocol: UDP }
+          securityContext:
+            # NET_ADMIN is the whole privilege budget: create the wg0 link and write the netfilter
+            # rules above. (It does NOT let the pod set a host sysctl — /proc/sys is read-only under
+            # hostNetwork — which is why nothing here tries.) Everything else is dropped, and the
+            # container is
+            # NOT privileged — which also keeps it clear of restrict-host-namespaces' second rule.
+            # SYS_MODULE is deliberately NOT granted: the `wireguard` module is loaded by the node
+            # (infra/ansible/roles/node_baseline, node_baseline_kernel_modules), so this container
+            # never needs to load a kernel module. If the module is missing the pod CrashLoops with
+            # a clear wg-quick error rather than quietly falling back to slow userspace WireGuard.
+            allowPrivilegeEscalation: false
+            capabilities:
+              drop:
+                - ALL
+              add:
+                - NET_ADMIN
+            # readOnlyRootFilesystem intentionally UNSET: the image's s6 init writes under /run and
+            # /var during startup. Same deferral as crafty/headlamp.
+            #
+            # EXPECTED, HARMLESS STARTUP NOISE — do not "fix" it. Because capabilities are dropped
+            # to NET_ADMIN only, the image's s6 init cannot chown /config (no CAP_CHOWN) and logs a
+            # run of `chown: ... Operation not permitted` plus "Permissions could not be set. This
+            # is probably because your volume mounts are remote or read-only" and a scary "we will
+            # not provide support for it". It is wrong about the cause and it does not matter:
+            # /config is a writable tmpfs emptyDir, everything here runs as root (uid 0) anyway, and
+            # wg-quick proceeds normally — verified on prod 2026-10-06, where the tunnel's only
+            # failure was the sysctl above, well past these warnings. Granting CAP_CHOWN to silence
+            # log noise would widen the privilege set of an internet-facing pod for nothing.
+          resources:
+            requests:
+              cpu: 25m
+              memory: 32Mi
+            limits:
+              # Kernel WireGuard does its crypto in the KERNEL, not in this container, so throughput
+              # does not consume the container's budget. The limit covers s6 plus the tmpfs holding
+              # wg0.conf (a memory-medium emptyDir counts against this).
+              memory: 128Mi
+          # `wg show wg0` exits non-zero when the interface is absent, which is the one failure that
+          # matters and the one that a port probe cannot see: a crashed or never-created wg0 leaves
+          # udp/51820 silent, and WireGuard is silent to unauthenticated traffic ANYWAY, so "nothing
+          # answers" is indistinguishable from "working" from the outside. This probe is the only
+          # thing that tells the difference.
+          startupProbe:
+            exec:
+              command: ["sh", "-c", "wg show wg0 >/dev/null"]
+            periodSeconds: 5
+            failureThreshold: 24
+          livenessProbe:
+            exec:
+              command: ["sh", "-c", "wg show wg0 >/dev/null"]
+            periodSeconds: 30
+            failureThreshold: 3
+          volumeMounts:
+            - { name: wg-config, mountPath: /config }
+            # Read-only so the image can SEE whether the kernel module is present and fail with a
+            # real message. It cannot load one (no SYS_MODULE) — that is the node's job.
+            - { name: lib-modules, mountPath: /lib/modules, readOnly: true }
+      volumes:
+        # tmpfs. The assembled wg0.conf contains the server's private key, so it must never land on
+        # a node's disk — `medium: Memory` guarantees that and guarantees it is gone when the pod is.
+        - name: wg-config
+          emptyDir:
+            medium: Memory
+            # 8Mi, not 1Mi: /config is this image's whole config ROOT, not just our one file — its
+            # s6 init also writes templates and state there, and a tmpfs that small would ENOSPC
+            # during startup rather than at a point anyone would connect to the volume size. Still
+            # counted against the container's 128Mi limit, and still far more than wg0.conf needs.
+            sizeLimit: 8Mi
+        # The ONLY secret in this component. SOPS-encrypted IN THIS TREE (R-SEC-01, spec docs/07) as
+        # wg-server-key.sops.yaml, delivered by Flux, referenced here by name only (R-IDP-04).
+        #
+        # It ships committed with a REPLACE-ME placeholder: an agent must not mint a long-lived
+        # private key (CLAUDE.md §6), so the operator generates it and `sops set`s it in
+        # (runbooks/vpn-remote-access.md step 2). Shipping the encrypted placeholder rather than no
+        # file at all is what lets the resource line and both overlay decryption patches be present
+        # and GREEN from the first commit — the alternative, a commented-out resource to uncomment
+        # later, is exactly the "file in git with no generator entry: reviewed, merged, apparently
+        # done, still broken" shape this repo keeps getting bitten by.
+        #
+        # DR: in git means a cluster rebuild restores it with everything else — the property an
+        # out-of-band `kubectl create secret` would NOT have had, and losing this key means
+        # re-enrolling every device because each client profile pins its public half. Velero also
+        # captures this namespace (its `daily` schedule excludes only `monitoring` and `unifi`).
+        # Keep a password-manager copy too: that is the one that survives losing cluster AND backups.
+        - name: wg-server-key
+          secret:
+            secretName: wg-server-key
+            defaultMode: 0400
+            items:
+              - { key: privatekey, path: privatekey }
+        - name: wg-peers
+          configMap:
+            name: wg-peers
+        - name: lib-modules
+          hostPath:
+            path: /lib/modules
+            type: Directory
@@ -0,0 +1,69 @@
+---
+# WireGuard remote-access VPN (north-south INGRESS). Reconciled by its OWN non-gating post-platform
+# Flux Kustomization (clusters/base/vpn-ingress.yaml, dependsOn platform-config, wait:false) — the
+# same placement as crafty/headlamp/homepage/runbooks, for the same reason: a leaf whose pod can be
+# legitimately unhealthy must never sit in the gating `platform` tier, where one component's
+# unhealth stalls platform-config and every apps wave behind it (DECISIONS-LOG: "Headlamp gating
+# stall"). That rationale is unusually concrete here: until the operator replaces the `REPLACE-ME`
+# placeholder in wg-server-key.sops.yaml (runbooks/vpn-remote-access.md step 2) this DaemonSet
+# CANNOT start, so putting it in the gating tier would have taken the whole platform down on merge.
+#
+# NOT in platform/kustomization.yaml — see clusters/base/vpn-ingress.yaml.
+apiVersion: kustomize.config.k8s.io/v1beta1
+kind: Kustomization
+# REQUIRED for the configMapGenerator below to be wired up at all, not merely tidy. A generated
+# ConfigMap inherits NO namespace, every other object here declares `vpn-ingress`, and kustomize's
+# nameReference transformer will not rewrite a reference across a namespace boundary — so without
+# this the DaemonSet keeps mounting the unhashed name `wg-peers`, which does not exist, and the
+# pods wedge on a missing volume. Verified by building it both ways (kustomize v5.8.1).
+# Same placement as runbooks/kustomization.yaml, which uses `namespace: runbooks` for its own
+# content generator.
+namespace: vpn-ingress
+resources:
+  - namespace.yaml
+  # The listener itself: hostNetwork DaemonSet, udp/51820 on every node.
+  - daemonset.yaml
+  # Namespace default-deny baseline. NOTE: does NOT constrain the hostNetwork DaemonSet — the file
+  # says so at length rather than implying a protection it cannot provide.
+  - networkpolicy.yaml  # The server's WireGuard private key — the ONE secret here. SOPS-encrypted (R-SEC-01, spec
+  # docs/07), decrypted per-env by the `vpn-ingress` Kustomization, referenced by name only from
+  # daemonset.yaml (R-IDP-04). Its plaintext `.example` sibling carries the operator hand-off --
+  # deliberately NOT named here: conformance/tests/l0-static/no-plaintext-secrets fails any
+  # kustomization that mentions an unencrypted template, because naming one is how a plaintext
+  # Secret gets applied by accident. (It matches comments too. That is correct, not overzealous.)
+  #
+  # SHIPS WITH A `REPLACE-ME` PLACEHOLDER, already encrypted. An agent must not
+  # mint a long-lived private key (CLAUDE.md §6), and the init container validates the value with
+  # `wg pubkey`, so the unfilled state is a loud CrashLoop naming this file, never a server that
+  # quietly cannot handshake.
+  - wg-server-key.sops.yaml
+#
+# THIS COMPONENT CARRIES AN ENCRYPTED SECRET, so BOTH overlays must patch the `vpn-ingress`
+# Kustomization with a `decryption:` stanza — clusters/dev and clusters/prod both do, added by the
+# same change as this file. That patch is as load-bearing as the file itself: without it kustomize
+# hands Flux the raw ciphertext, the Secret APPLIES CLEANLY full of ENC[...], and nothing in any
+# Flux condition looks wrong. The init container's `wg pubkey` guard exists partly to turn exactly
+# that into a named error rather than a silently non-working tunnel.
+
+# ── THE PEER REGISTER, as a CONTENT-HASHED ConfigMap ─────────────────────────────────────────
+# peers.conf (plaintext, reviewable — see the file) becomes the `wg-peers` ConfigMap. It is a
+# GENERATOR, not a plain resource, and that distinction is load-bearing rather than stylistic:
+# kustomize appends a hash of the content to the generated name and rewrites the DaemonSet's
+# volume reference to match, so adding or revoking a peer changes the pod template and ROLLS THE
+# PODS automatically.
+#
+# A fixed-name ConfigMap (which is what this component shipped first) does not do that. Flux
+# updates it in place, the pod template is byte-identical, no rollout is triggered — and because
+# the init container assembles wg0.conf ONCE at pod start into a tmpfs, the running tunnel keeps
+# the old peer list indefinitely. Measured on prod 2026-10-06: a merged peer reached the
+# ConfigMap while `wg show` listed no peers and the DaemonSet still read generation=1, having
+# never rolled. The runbook's "PR -> merge -> Flux rolls the DaemonSet" was false until this.
+#
+# DO NOT set `disableNameSuffixHash` here. The hash IS the mechanism.
+configMapGenerator:
+  - name: wg-peers
+    files:
+      - peers.conf
+    options:
+      labels:
+        app.kubernetes.io/name: vpn-ingress
@@ -0,0 +1,26 @@
+---
+# WireGuard REMOTE-ACCESS VPN (north-south INGRESS) — the counterpart to platform/vpn-egress.
+#
+# Do not confuse the two. They are opposite directions and share nothing but the word "VPN":
+#   * platform/vpn-egress  — pods OUT to the internet through a PIA tunnel (ADR-0015, R-NET-05/06/07).
+#   * platform/vpn-ingress — remote CLIENTS IN from the internet to this LAN. THIS directory.
+#
+# NOTE: intentionally NOT homelab.keithjackson.dev/app-namespace=true. This is PLATFORM network
+# infrastructure (like cilium / vpn-egress), not an application, so Kyverno does NOT generate the app
+# default-deny baseline here and the app-scoped auth-mode / egress-class / host-namespace policies do
+# not apply — every Kyverno policy in platform/kyverno/policies matches namespaceSelector
+# app-namespace=true. THAT EXEMPTION IS LOAD-BEARING HERE, not incidental: this workload runs with
+# `hostNetwork: true`, which `restrict-host-namespaces` forbids in an app namespace. It is permitted
+# here by that policy's OWN stated carve-out — "platform components that do [need host namespaces] --
+# e.g. Cilium, node-exporter -- live in platform namespaces that do NOT carry the app-namespace
+# label, so they are out of scope". daemonset.yaml documents why hostNetwork is REQUIRED rather than
+# convenient; it is the single most consequential decision in this component.
+#
+# NO `gateway-access` label. This component serves no HTTP and attaches no HTTPRoute to the shared
+# Gateway — it is a raw UDP listener. There is deliberately nothing here for the L7 Gateway to route.
+apiVersion: v1
+kind: Namespace
+metadata:
+  name: vpn-ingress
+  labels:
+    app.kubernetes.io/name: vpn-ingress
@@ -0,0 +1,56 @@
+---
+# =================================================================================================
+# READ THIS BEFORE TRUSTING THIS FILE: it does NOT constrain the WireGuard listener.
+# =================================================================================================
+# Every other platform namespace in this repo (crafty, headlamp, homepage, runbooks) ships an
+# explicit default-deny baseline as defense in depth, because Kyverno's generator only covers
+# `app-namespace=true` namespaces. This file keeps that convention — but it would be dishonest to
+# leave it at that, because the convention does not actually bite here:
+#
+#   THE `wireguard` DaemonSet RUNS WITH hostNetwork: true, SO IT HAS NO CILIUM ENDPOINT, AND NO
+#   NetworkPolicy OR CiliumNetworkPolicy APPLIES TO IT — NEITHER THIS ONE NOR ANY OTHER.
+#
+# That is the documented reason restrict-host-namespaces forbids hostNetwork in app namespaces at
+# all ("a pod on hostNetwork bypasses the CNI (Cilium) datapath and therefore ESCAPES the
+# default-deny NetworkPolicy fabric -- it is the most direct way to defeat R-NET-01"). Here that
+# escape is the deliberate, required design (daemonset.yaml explains why: without it, remote
+# clients carry a pod identity and are 403'd by every Gateway hostname). A CiliumNetworkPolicy
+# admitting `world` to udp/51820 would therefore be theatre: it would read as the control that
+# protects this port, and it would be enforcing nothing. So there isn't one.
+#
+# WHAT ACTUALLY PROTECTS THE EXPOSED PORT, then, since the CNI does not:
+#   1. WireGuard's cryptographic peer authentication. A packet whose key is not in peers.conf gets
+#      NO REPLY — see README "Why this is safe to expose". This is the real control.
+#   2. The SOHO router's forward: only udp/51820 is forwarded inbound, to one node.
+#   3. The blast radius once authenticated is deliberately the whole LAN — that IS the requirement
+#      ("clients should reach the entire local network"). README "What a client can reach" states
+#      the consequence in full, including reach to the nodes' own control plane, and gives the
+#      narrowing recipe for an operator who wants less than that.
+#
+# WHAT THIS FILE IS STILL FOR: it is the namespace's standing posture for any FUTURE pod-networked
+# workload added here (a metrics exporter is the likely one — README "Not built"). Without it, such
+# a pod would be born unrestricted, because Kyverno will not generate a baseline in a namespace
+# that is not labelled `app-namespace=true`, and this one deliberately is not.
+apiVersion: networking.k8s.io/v1
+kind: NetworkPolicy
+metadata:
+  name: default-deny
+  namespace: vpn-ingress
+  labels:
+    homelab.keithjackson.dev/baseline: default-deny
+spec:
+  podSelector: {}
+  policyTypes:
+    - Ingress
+    - Egress
+  ingress: []
+  egress:
+    - to:
+        - namespaceSelector:
+            matchLabels:
+              kubernetes.io/metadata.name: kube-system
+      ports:
+        - protocol: UDP
+          port: 53
+        - protocol: TCP
+          port: 53
@@ -0,0 +1,92 @@
+# THIS FILE IS THE MOUNTED CONTENT. It is turned into the `wg-peers` ConfigMap by
+# `configMapGenerator` in kustomization.yaml, whose generated name carries a CONTENT HASH — so
+# editing this file changes the ConfigMap name, which changes the DaemonSet's pod template, which
+# ROLLS THE PODS. That is the whole reason it is a generator and not an inline ConfigMap manifest:
+# a fixed-name ConfigMap updates in place, the pod template never changes, no rollout happens, and
+# the init container's wg0.conf (built once at pod start, in tmpfs) keeps the OLD peer list
+# forever. Measured 2026-10-06: a merged peer sat in the ConfigMap while `wg show` listed none and
+# the DaemonSet reported generation=1 — it had never rolled. Same mechanism and same fix as
+# runbooks/kustomization.yaml.
+#
+# Every line here is WireGuard config. `#` is a legal comment in it, so the documentation below
+# travels inside the file that is actually mounted, rather than in a wrapper that gets stripped.
+#
+# ============================================================================================
+# THE PEER REGISTER — every device allowed to dial in, in PLAINTEXT, in git, on purpose.
+# ============================================================================================
+# WireGuard has no usernames, no passwords and no PKI. Authorisation is exactly one thing: a
+# device's PUBLIC key appears in this file, or it cannot complete a handshake. An unlisted key
+# gets no reply at all — not a rejection, silence (see README "Why this is safe to expose").
+# Revoking a device is therefore deleting its stanza, and nothing else.
+#
+# WHY PLAINTEXT, AND WHY THIS IS NOT A SECRET LEAK. A WireGuard peer's PUBLIC key is public by
+# construction — it is the half you are supposed to hand to the server, and holding it grants
+# nothing. The only secret in the whole scheme is the SERVER's private key, which is NOT here:
+# it lives in the `wg-server-key` Secret and is assembled into the running config at pod start
+# (daemonset.yaml). Keeping the register in cleartext buys the property that matters most for an
+# access-control list: **"who can get into my house" is reviewable in a pull-request diff**, and
+# its history is `git log` on this file. A SOPS-encrypted register would hide exactly the change
+# a reviewer most needs to see — a new line granting a new device entry to the whole LAN.
+#
+# This is the same division of labour the repo already uses for the opposite case: a Secret's KEY
+# NAMES are cleartext while values are encrypted (.sops.yaml `encrypted_regex`), so diffs stay
+# readable. Here the whole file is the key-name half.
+#
+# ADDING A DEVICE — never hand-roll this, and never generate a key in a chat transcript.
+#   ./infra/vpn-ingress/new-peer.sh <device-name> <last-octet>
+# It generates the keypair ON THE OPERATOR'S MACHINE, writes/renders the client profile (and a
+# QR code for phones), prints ONLY the public half for pasting below, and never transmits or
+# logs the private half. Then: add the stanza, PR, merge; Flux rolls the DaemonSet.
+#
+# ADDRESS ALLOCATION. ${WG_CLIENT_CIDR} is the tunnel subnet; .1 is the server (every node).
+# Give each device ONE address as a /32 in AllowedIPs. A /32 is not a formality — on the SERVER
+# side AllowedIPs is the cryptokey ROUTING table AND the inbound source filter: a peer may only
+# send from, and receive traffic for, the addresses listed in its own stanza. A sloppy /24 here
+# would let any one device impersonate every other device's tunnel address.
+#
+#   .1          the server (this DaemonSet, on every node)
+#   .2 - .254   devices, one each, allocated below. Keep this list dense and in order so the
+#               next free octet is obvious; never re-use an octet after revoking a device
+#               (an old client profile would silently start working again as someone else).
+#
+# PRESHARED KEYS are deliberately NOT used. They add a symmetric post-quantum hedge on top of
+# the Noise handshake and would be a genuine secret — which would force this register into SOPS
+# and cost the reviewability above. Revisit only if the threat model changes; if it does, the PSK
+# belongs in the `wg-server-key` Secret, not here. See README "Hardening not taken".
+#
+# name: wg-peers
+# namespace: vpn-ingress
+# labels:
+# app.kubernetes.io/name: vpn-ingress
+# Appended VERBATIM to the generated [Interface] block, in this order, at pod start.
+#
+# *** THERE ARE NO PEERS YET. THAT IS THE CORRECT INITIAL STATE, NOT AN OVERSIGHT. ***
+# An agent must not mint key material (CLAUDE.md §6), so no device could be enrolled as part of
+# authoring this component. A zero-peer WireGuard interface is valid and starts cleanly: the
+# DaemonSet will run and listen, and every handshake will be refused because no key is trusted.
+# The VPN is therefore INERT-BUT-HEALTHY until the first stanza lands — fail-closed, and visible
+# (`wg show` reports an interface with no peers).
+#
+# COPY THIS TEMPLATE, uncomment, one block per device:
+#
+#   # <device-name> — <owner>, enrolled <YYYY-MM-DD>
+#   [Peer]
+#   PublicKey = <the public key new-peer.sh printed>
+#   AllowedIPs = 10.90.0.<octet>/32
+#
+# The placeholders above are deliberately NOT valid values. An earlier version of this template
+# used a real-looking `10.90.0.2/32`, and new-peer.sh's duplicate-address check — which grepped
+# the whole file — matched it, so `.2` could never be allocated and the script insisted it was
+# already taken. The check now ignores comments; keeping the example unmatchable too means a
+# future grep cannot be fooled either.
+#
+# Keep the `# <name> — <owner>, enrolled <date>` comment line. It is the only place a key is
+# tied to a human-recognisable device; `wg show` can only ever print the key itself, so without
+# it an incident responder cannot tell which stanza to delete.
+#
+# No peers enrolled yet. See the template in this file's comments and
+# ./infra/vpn-ingress/new-peer.sh. One [Peer] block per device.
+# keith-phone — <owner>, enrolled 2026-10-06
+[Peer]
+PublicKey = pBRSHrRyG2hnsuZ6FvHfEzF8hOVTF5stHUb/7fW2Km8=
+AllowedIPs = 10.90.0.2/32
@@ -0,0 +1,34 @@
+# WireGuard SERVER private key for platform/vpn-ingress — SOPS-ENCRYPTED (R-SEC-01, spec docs/07).
+# Keys stay cleartext for reviewable diffs; only `stringData` values are encrypted (.sops.yaml
+# `encrypted_regex`). Plaintext template + operator hand-off: wg-server-key.sops.yaml.example.
+apiVersion: v1
+kind: Secret
+metadata:
+    name: wg-server-key
+    namespace: vpn-ingress
+type: Opaque
+stringData:
+    #ENC[AES256_GCM,data:fUoPkfWvasisdTtwdhjeOVOlmdQkTl6Bp9YxYyji8g6k+ClATds3BnHJWOj2iplaGpT2XaNakq1+D4YyOi7QbFvNJui+e4qRpqcY8hWnazvZIHJYxjxfAfzW,iv:xtKd6oMZQumAQJAsNLHqJB+o0wdQJ+vL1kI1mc9jL7w=,tag:aImqLgbSmhsRI36/t5kpyg==,type:comment]
+    #ENC[AES256_GCM,data:npDsCW6rQleolIpur5gFkX2jSRrIQzBlGaIPs2Schv0YU3q8AanG39z4QqT3ASDmskV5YuH29Bo0ujEAgBf52YIjQCp58PDDETofrVKOJzhHMa7bV+HCxUFE,iv:7E7thyFBleyqZpqJRGApKvIq3ubCFOkshF/mxim3YPc=,tag:joIrhMe2I6kUnx1ouOPdZw==,type:comment]
+    #ENC[AES256_GCM,data:wHUFx09FgP/2+LTyw61EFbKA5UaqfjU7CeGk6Xc5av2y4r4AvQJRefDM5EGlahKecDFEFsf7fSQRFRHtUJqrQTtw+6tcj3ubSCPW4iJvhyJJv0xdb/0puRmcgj+2NfgF,iv:xgDOSDLqMQ1wcI9vrkKqfNMgIDFEusFnnO7Rzq/aOa4=,tag:m1m/fgjkBsG91c+3daqOpA==,type:comment]
+    privatekey: ENC[AES256_GCM,data:ML8CPNm4JwhQHUTUUxZO/I+9X15BCIGqOb1Uw9EmX5RTAsxQ9N97YvkYlbY=,iv:5ZUsFdMMmeGsy4fNbk6qbJkzweMVWXZ5g6E7NciAGUg=,tag:pAHv3ieLjoEyFbqbWXsVgg==,type:str]
+sops:
+    kms: []
+    gcp_kms: []
+    azure_kv: []
+    hc_vault: []
+    age:
+        - recipient: age175l8mdpdfu7hq0aml3exs3gykarwjmuvr23sq56s3wjejnyk44wsp4mfzg
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBMays2OXY0VkpRc2FQQmhU
+            Q0owM3N0VkhYR0lYTUdNZWRqeTFIMjNHOVJ3CnJSMnc5NFEyU0IzWTFtUkw2YVFS
+            MU02VFo1TE14YVpZRzNhVjZwRTZwd0UKLS0tIDFaMWF4NUZjZmhRdXRuZFJYNkg3
+            SUUzN1FnMlI4bkkzbVNlMWhUVnJZODAKQ+Iy86CIv/Oj9E9j4E/0y5hDbcctRuqB
+            OR825KRPRaTdF/G2hudE1R1JbM4wGbPLMzv078R4ZXHDPGvDttSEkA==
+            -----END AGE ENCRYPTED FILE-----
+    lastmodified: "2026-10-06T06:10:31Z"
+    mac: ENC[AES256_GCM,data:6wAGAwWL7jI/NEeswBnUiWoRty+bb5DEsGEAPXajKNNYCwtm5yuXBrcOI/q4w6H8FG+nqVAECkdpAOI3S9mjDfc2zlWAzfCJJdDic92RKPXOC0tOH/M1BBSGJ1fVdJGAZZT1yAVxmtYy9WohJpawv3kmsVv+JnD+TIqmZ1CJHXo=,iv:srs4o0olSwmraQQgmdPxb+4h/t6fHHeFKJ2z914kGgY=,tag:jjoIKhU8Tu9i5SJkvkfcCg==,type:str]
+    pgp: []
+    encrypted_regex: ^(data|stringData)$
+    version: 3.9.4
@@ -0,0 +1,76 @@
+# =============================================================================
+# TEMPLATE — NOT APPLIED, NOT ENCRYPTED (.yaml.example is ignored by kustomize and never
+# auto-encrypted by SOPS). Reference scaffold + OPERATOR HAND-OFF.
+#
+# WHAT THIS IS: the WireGuard SERVER's long-term private key for the remote-access VPN
+# (platform/vpn-ingress). It is the ONE secret in the whole component. The init container in
+# daemonset.yaml reads it at `/run/wg-server-key/privatekey` and joins it to the PLAINTEXT peer
+# register (peers.conf) in a tmpfs, so the assembled wg0.conf never touches a node's disk.
+#
+# WHY IT IS IN GIT, SOPS-ENCRYPTED, AND NOT HAND-CREATED. R-SEC-01 / spec docs/07: secrets live in
+# source, encrypted, and reach the cluster only through Flux. An out-of-band `kubectl create secret`
+# would put the single credential every enrolled device depends on OUTSIDE the GitOps tree, where a
+# cluster rebuild silently loses it — and losing it means RE-ENROLLING EVERY DEVICE, because each
+# client profile pins this key's public half.
+#
+# *** THE REAL FILE IS COMMITTED WITH `privatekey: REPLACE-ME`, ALREADY ENCRYPTED. ***
+# That is deliberate, so the wiring is complete and green before the key exists: the resource is
+# already listed in kustomization.yaml and both overlays already carry the `vpn-ingress` decryption
+# patch. Your job is ONLY to replace the value (step 3 below). Until you do, the DaemonSet
+# CrashLoops with an explicit FATAL naming this file — the init container validates the value with
+# `wg pubkey` before writing wg0.conf, so a placeholder fails CLOSED and LOUDLY rather than
+# producing a server that silently cannot complete a handshake.
+#
+# ---------------------------------------------------------------------------------------------
+# EVERYTHING RUNS IN THE DEV CONTAINER. `wg`, `sops` and `qrencode` are all baked into the image
+# (infra/devcontainer/Containerfile) because that image IS the toolchain — CLAUDE.md §5, and the
+# devcontainer README's "Don't install the toolchain on the host". One shell, one toolchain, so
+# `wg genkey | sops set` is just a pipeline.
+# ---------------------------------------------------------------------------------------------
+#
+# HAND-OFF STEPS (operator — an agent must not mint a long-lived private key, CLAUDE.md §6).
+# Full procedure with verification: runbooks/vpn-remote-access.md step 2.
+#
+#  1. Generate the key STRAIGHT INTO this file. The plaintext never lands on disk and never
+#     reaches a terminal; `sops set` edits the already-encrypted document in place:
+#         ./infra/devcontainer/dev.sh run bash -c '
+#           cd /work
+#           umask 077
+#           sops set platform/vpn-ingress/wg-server-key.sops.yaml \
+#             "[\"stringData\"][\"privatekey\"]" "\"$(wg genkey)\""
+#         '
+#     (Or edit it: `./infra/devcontainer/dev.sh run sops platform/vpn-ingress/wg-server-key.sops.yaml`.)
+#
+#  2. Record BOTH halves in your PASSWORD MANAGER. The encrypted file is in git and Velero captures
+#     this namespace to R2, so this is belt-and-braces — but it is the only copy that survives
+#     losing the cluster AND the backups, and the key cannot be regenerated without invalidating
+#     every client profile.
+#         # public half (safe to display; it is what every client profile carries)
+#         ./infra/devcontainer/dev.sh run bash -c 'cd /work && sops -d \
+#           --extract "[\"stringData\"][\"privatekey\"]" \
+#           platform/vpn-ingress/wg-server-key.sops.yaml | wg pubkey'
+#
+#  3. Confirm the value is a real key without printing it — `wg pubkey` succeeds only on a valid
+#     32-byte curve25519 private key, which is exactly the check the pod's init container runs:
+#         ./infra/devcontainer/dev.sh run bash -c 'cd /work && sops -d \
+#           --extract "[\"stringData\"][\"privatekey\"]" \
+#           platform/vpn-ingress/wg-server-key.sops.yaml | wg pubkey >/dev/null \
+#           && echo "valid WireGuard key"'
+#
+#  4. PR it. Nothing else to wire: the resource line and both overlay decryption patches already
+#     exist. Flux rolls the DaemonSet and the pods leave CrashLoop.
+#
+# NOTE infra/vpn-ingress/new-peer.sh reads THIS FILE to derive each client profile's
+# `[Peer] PublicKey`, so there is no separate copy of the key to keep in step with anything.
+# =============================================================================
+apiVersion: v1
+kind: Secret
+metadata:
+  name: wg-server-key
+  namespace: vpn-ingress
+type: Opaque
+stringData:
+  # The server's WireGuard private key: `wg genkey` output — 44 chars of base64 ending in '='.
+  # NOT a passphrase, and NOT the public key. The init container validates it with `wg pubkey`
+  # before writing wg0.conf, so a placeholder or a mangled value fails closed with a clear message.
+  privatekey: REPLACE-ME
@@ -120,6 +120,9 @@ Each affected runbook says so on its own page and gives the by-hand equivalent.
 - **`vpn-egress-stale`** — the tunnel is UP but `egress-class=vpn` pods have no egress: Cilium's cached
  ifindex outlived a reconnect. Also covers the watchdog for that rule going inert.
 - **`denied-flows`** — policy-denied flow spike. The Cilium hairpin/identity regression class.
+- **`vpn-remote-access`** — the INBOUND remote-access VPN (WireGuard, udp/51820): standing it up,
+  enrolling and revoking devices, and the off-LAN checks that are the only honest proof it works.
+  The opposite direction to the two pages above — do not confuse them.

 ### Backups and DR
 - **`backup-failure`** — a Velero backup failed. The R2 object-tagging incompatibility is documented here.
@@ -119,3 +119,8 @@ configMapGenerator:
      - update-rollback=update-rollback.md
      - vpn-down=vpn-down.md
      - vpn-egress-stale=vpn-egress-stale.md
+      # Operator procedure, not an alert page. Served because the component it completes is INERT
+      # until three off-repo manual steps are done (kernel module, server key, WAN port-forward) —
+      # and because the one check that actually proves it cannot be run from inside the house.
+      # Peer-level alerting does not exist yet (it needs an exporter); this page is the substitute.
+      - vpn-remote-access=vpn-remote-access.md
@@ -67,7 +67,9 @@ Work through these in order; the first three are by far the most likely.
 | Symptom in the log | Cause | Fix |
 |---|---|---|
 | `GET /user returned no login — is GITEA_TOKEN valid?` and a CrashLoop | the credentials are still the committed **placeholders**, or the token was revoked | fill them in per `platform/pm-agent/pm-agent-credentials.sops.yaml.example` |
-| `ImagePullBackOff`, digest `sha256:0000…` | the image has never been pushed; the committed digest is the deliberate placeholder | `infra/agent/build-image.sh`, operator pushes, then one PR updates the digest in **both** `deployment.yaml` and `configmap.yaml` (`PM_WORKER_IMAGE`) |
+| `ImagePullBackOff`, digest `sha256:0000…` | the image has never been pushed; the committed digest is the deliberate placeholder | `infra/agent/build-image.sh`, operator pushes, then one PR updates the digest in **both** `deployment.yaml` and `configmap.yaml` (`PM_WORKER_IMAGE`) — but read the row below first |
+| `ImagePullBackOff` with `x509: certificate is not valid for any names` | **diagnosed.** containerd pulls as a node process, resolves through the node's public upstreams, and gets the CNAME to the WAN IP — which this router does not hairpin, so it answers :443 with its own `CN=%D` placeholder certificate (no SANs at all). Nothing to do with the digest, the Gateway or the wildcard cert | the `/etc/hosts` pin for `gitea.{{ k3s_base_domain }}` → `192.168.2.20` in `infra/ansible/inventory/group_vars/k3s_prod/vars.yml` fixes it — the same pin the Keycloak issuer already has. Apply it with the project's own tooling, scoped to just that task: `cd infra/ansible && ansible-playbook playbooks/node-baseline.yml -e k3s_hosts=k3s_prod --tags hosts`. Full evidence: `decisions/2026-10-06-pm-agent-node-resolves-gitea-to-wan.md` |
+| `ImagePullBackOff` with `401 Unauthorized` once TLS works | the pull is unauthenticated. An anonymous client gets nothing from this Gitea's registry, and no `imagePullSecret` exists anywhere in the tree | add one (a `dockerconfigjson`, SOPS-encrypted like `pm-agent-credentials`, referenced from the Deployment **and** the committed worker Job template) or allow anonymous reads of the package in Gitea — a posture decision, so yours |
 | `PM_WORKER_IMAGE must be digest-pinned` | someone put a tag in the ConfigMap | use the digest from `podman push --digestfile` |
 | `scope: ONLY issues labelled 'agent'` | `PM_REQUIRE_LABEL` is set; unlabelled issues are out of scope by configuration | label the issue, or clear the knob |
 | `cycle: 2 worker(s) active` and nothing new | at `PM_MAX_ACTIVE_WORKERS` | wait, or raise it (RAM is the binding constraint: each worker's limit is 2Gi) |
@@ -0,0 +1,302 @@
+# vpn-remote-access — standing up the WireGuard remote-access VPN, and proving it
+
+**Status: the in-cluster half is shipped; the VPN is INERT until three manual steps are done.**
+All three are off-repo by necessity — a kernel module, a private key, and a router port-forward.
+**Alert:** pod-down is covered generically (`KubePodNotReady` / `KubeDeploymentReplicasMismatch`).
+There is **no peer-level alerting** — see "Why there is no connection alert". This is an **operator
+procedure**, not an incident page.
+**Files:** `platform/vpn-ingress/` (namespace, peer register, DaemonSet, baseline policy),
+`clusters/base/vpn-ingress.yaml` (its Flux tier), `clusters/base/cluster-vars.yaml`
+(`WG_CLIENT_CIDR`), `infra/ansible/roles/node_baseline/defaults/main.yml` (the `wireguard` module),
+`infra/vpn-ingress/new-peer.sh` (device enrolment).
+**Design rationale:** `platform/vpn-ingress/README.md` — read "Why `hostNetwork` is required"
+before changing anything about how this is wired.
+**Not to be confused with** `vpn-down` / `vpn-egress-stale`, which are about `platform/vpn-egress`
+(pods *out* through PIA). This page is remote clients *in*.
+
+## What this gives you
+
+A device — Android, Linux, Windows, macOS, iOS — dials in over **udp/51820** from anywhere and
+behaves like a machine on the LAN: full reach to `192.168.2.0/24`, the Gateway's web UIs, PiHole
+DNS, and internet egress out the house WAN.
+
+Authorisation is one thing only: the device's **public key is in
+`platform/vpn-ingress/peers.conf`**. An unlisted key gets no reply at all.
+
+> **An enrolled device is as privileged as a machine sitting in the house** — including the three
+> k3s nodes (`192.168.2.10/.11/.12`: apiserver 6443, kubelet 10250, SSH 22). That is what "reach
+> the entire local network" means. Revoke a lost device promptly: delete its stanza, PR, merge.
+
+## Step 1 — load the `wireguard` module on every node (once)
+
+The DaemonSet creates its `wg0` link in the host netns with `CAP_NET_ADMIN` only; it is
+deliberately **not** granted `CAP_SYS_MODULE`, so it cannot autoload the module. Without it
+`wg-quick` fails outright and the pod CrashLoops.
+
+```bash
+# operator action (Ansible is not an agent action). Ansible lives ONLY in the pinned toolbox,
+# and ansible.cfg is only picked up from infra/ansible, so cd there inside the container.
+./infra/devcontainer/dev.sh run bash -c \
+  'cd /work/infra/ansible && ansible-playbook playbooks/node-baseline.yml -e k3s_hosts=k3s_prod --tags system'
+```
+
+Three details in that command are load-bearing, not style:
+
+- **`-e k3s_hosts=k3s_prod`.** `node-baseline.yml` targets `k3s_servers` by default, which is the
+  **dev** group — and dev was decommissioned, so an unqualified run does nothing useful. This is
+  the targeting pattern `infra/ansible/README.md` "Targeting prod" documents for every playbook.
+- **`--tags system`, and never an untagged run.** The two kernel-module tasks carry the `system`
+  tag. An untagged run would also execute the `disks` tasks, which assert on block-device variables
+  prod has deliberately left as placeholders (`infra/PROD-PROVISIONING.md` §2) — the playbook's own
+  header warns about this. `--tags system` is broader than the modules alone (it also re-asserts
+  sysctls, iscsid, qemu-guest-agent and the swap masking) but every one of those is idempotent and
+  already in its desired state on a live node.
+- **It is a playbook, not a wrapper script.** There is no `site.sh` in this repo; `playbooks/site.yml`
+  is the full bring-up chain and is the wrong tool here.
+
+Verify on each node — the module is in-tree since kernel 5.6, so nothing is installed, only loaded:
+
+```bash
+# expected: a `wireguard` line, and the modules-load.d file naming it for the next boot
+lsmod | grep '^wireguard'
+grep -w wireguard /etc/modules-load.d/k3s-cilium-longhorn.conf
+```
+
+## Step 2 — fill in the server key (once)
+
+The key is **SOPS-encrypted in this tree** (R-SEC-01, spec docs/07), not created by hand:
+`platform/vpn-ingress/wg-server-key.sops.yaml`. It is already committed — encrypted, with a
+`REPLACE-ME` placeholder — and it is already listed in the component's `resources:` with a
+`decryption:` patch in both overlays. **Nothing needs wiring. You are only replacing one value.**
+
+Why in git rather than `kubectl create secret`: an out-of-band Secret puts the one credential every
+enrolled device depends on outside the GitOps tree, where a cluster rebuild silently loses it — and
+losing it means re-enrolling every device, because each client profile pins this key's public half.
+
+Everything below runs **inside the dev container** — `wg`, `sops` and `qrencode` are all baked into
+the image (CLAUDE.md §5: the toolchain lives only in the pinned container; don't install it on the
+host). One shell, one toolchain.
+
+**1. Generate the key straight into the encrypted file.** One pipeline: `wg genkey` makes it,
+`sops set` writes it into the already-encrypted document in place. The plaintext never lands on
+disk and never reaches a terminal.
+
+```bash
+./infra/devcontainer/dev.sh run bash -c '
+  cd /work
+  umask 077
+  sops set platform/vpn-ingress/wg-server-key.sops.yaml \
+    "[\"stringData\"][\"privatekey\"]" "\"$(wg genkey)\""
+'
+```
+
+**2. Record it in your PASSWORD MANAGER.** Derive both halves from the file you just wrote:
+
+```bash
+# the PUBLIC half — safe to display, and what every client profile carries
+./infra/devcontainer/dev.sh run bash -c 'cd /work && sops -d --extract "[\"stringData\"][\"privatekey\"]" \
+  platform/vpn-ingress/wg-server-key.sops.yaml | wg pubkey'
+
+# the PRIVATE half — paste into the password manager, then clear your scrollback
+./infra/devcontainer/dev.sh run bash -c 'cd /work && sops -d --extract "[\"stringData\"][\"privatekey\"]" \
+  platform/vpn-ingress/wg-server-key.sops.yaml'
+```
+
+The second command is the one place this key is deliberately shown. The encrypted file is in git and
+Velero captures this namespace to R2, so the password-manager copy is belt-and-braces — but it is
+the only copy that survives losing the cluster *and* the backups, and the key cannot be regenerated
+without invalidating every client profile.
+
+**3. Confirm the value is a real key**, without printing it — if `wg pubkey` prints a key, the
+value is valid; if it errors, it is still wrong:
+
+```bash
+./infra/devcontainer/dev.sh run bash -c 'cd /work && sops -d --extract "[\"stringData\"][\"privatekey\"]" \
+  platform/vpn-ingress/wg-server-key.sops.yaml | wg pubkey >/dev/null && echo "valid WireGuard key"'
+```
+
+That is the same check the pod's init container runs, so a pass here predicts a pass there.
+
+**4. PR it, and merge.** Flux rolls the DaemonSet and the pods leave CrashLoop.
+
+If you would rather use an editor than `sops set`:
+`./infra/devcontainer/dev.sh run sops platform/vpn-ingress/wg-server-key.sops.yaml` (replace
+`REPLACE-ME`, save, exit — it re-encrypts on write).
+
+### What the pod tells you if this went wrong
+
+The init container validates the value with `wg pubkey` before writing `wg0.conf`, and names the
+specific failure in its log — so you never get a server that silently cannot complete a handshake:
+
+| pod log says | meaning |
+|---|---|
+| `still the committed REPLACE-ME PLACEHOLDER` | step 3 not done (the expected fresh-install state) |
+| `It is EMPTY` | the value was blanked |
+| `still SOPS CIPHERTEXT (starts with ENC[)` | the Secret reached the cluster undecrypted — this environment's overlay is missing its `vpn-ingress` decryption patch. **This is the dangerous one:** the Secret applies cleanly and every Flux condition stays green |
+| `wg pubkey rejected it` with none of the above | a mangled value, or a *public* key pasted by mistake |
+| `net.ipv4.ip_forward is 0 on this node` | the node_baseline role has not run here (step 1). The pod **cannot** set this itself — under `hostNetwork` the runtime mounts `/proc/sys` read-only, because it is the host's global setting |
+| `0 peer(s)` after you merged a peer | the DaemonSet did not roll. Check its `generation` (above). Pre-2026-10-06 this was guaranteed, because the register was a fixed-name ConfigMap; if it recurs, something has reverted `peers.conf` to a plain resource instead of a `configMapGenerator` |
+
+### What a healthy start looks like
+
+Measured on prod 2026-10-06. The init container logs one line, naming the shape and never the key:
+
+```
+wg0.conf assembled: 0 peer(s), server 10.90.0.1/24, udp/51820.
+```
+
+then the `wireguard` container brings the tunnel up:
+
+```
+**** Found WG conf /config/wg_confs/wg0.conf, adding to list ****
+**** Activating tunnel /config/wg_confs/wg0.conf ****
+[#] ip link add dev wg0 type wireguard
+[#] wg addconf wg0 /dev/fd/63
+[#] ip -4 address add 10.90.0.1/24 dev wg0
+[#] ip link set mtu 1420 up dev wg0
+```
+
+**Ignore the `chown: ... Operation not permitted` run before that**, and the image's own
+"Permissions could not be set ... we will not provide support for it". Capabilities are dropped to
+`NET_ADMIN` only, so its s6 init has no `CAP_CHOWN`; `/config` is a writable tmpfs, everything runs
+as root, and `wg-quick` proceeds. It is wrong about the cause and it does not matter.
+
+**A pod stuck `0/1 Running` with `Startup probe failed: Unable to access interface: No such device`
+means `wg-quick` tore the tunnel down** — read the `wireguard` container log for the `[#]` line it
+died on. That is the shape of a real failure; the probe is doing its job of refusing to call a
+server without a `wg0` "ready".
+
+## Step 3 — forward udp/51820 on the router (once)
+
+On the SOHO router at `192.168.2.1`, forward **WAN udp/51820** to **one node address**, e.g.
+`192.168.2.10:51820`. This is hand-made and off-repo; it is the half CI can never check.
+
+Pick any node — all three run an identical listener. Note which one you chose here:
+
+```
+# WAN udp/51820 -> 192.168.2.__  (k3s-prod-_)   set <date>
+```
+
+**Node loss = failover is this one line.** Re-point the forward at another node address; every
+device keeps working with the same profile, because all three nodes answer the same keys.
+
+Do **not** also expose this on tcp, and do not change the port hoping for obscurity — WireGuard is
+already silent to unauthenticated probes (README, "Why this is safe to expose").
+
+## Step 4 — confirm the listener is healthy
+
+```bash
+./infra/devcontainer/dev.sh run bash -c \
+  'kubectl --context k3s-prod -n vpn-ingress get ds wireguard -o wide'
+# expected: DESIRED 3  CURRENT 3  READY 3
+
+./infra/devcontainer/dev.sh run bash -c \
+  'kubectl --context k3s-prod -n vpn-ingress exec ds/wireguard -- wg show'
+# expected: `interface: wg0`, `listening port: 51820`, and (before step 5) NO peers.
+```
+
+A zero-peer interface that is Ready is the **correct** state before any device is enrolled: it
+listens, and refuses every handshake because no key is trusted.
+
+The readiness/liveness probe is `wg show wg0`, and that is load-bearing rather than cosmetic: a
+port probe cannot distinguish "wg0 never came up" from "working", because WireGuard is silent to
+unauthenticated traffic either way. If the pod is Ready, the interface exists.
+
+## Step 5 — enrol a device
+
+```bash
+# in the dev container, like everything else
+./infra/devcontainer/dev.sh run bash -c './infra/vpn-ingress/new-peer.sh pixel-8 2'            # full tunnel
+./infra/devcontainer/dev.sh run bash -c './infra/vpn-ingress/new-peer.sh thinkpad 3 --split'   # LAN only
+```
+
+It derives the server's public key from `wg-server-key.sops.yaml` itself, so there is no local key
+copy to keep in step with anything. Profiles land in `.cache/wg-peers/` — gitignored, and persistent
+because the repo is the container's only read-write mount.
+
+It generates the device's keypair, writes a `0600` client profile, prints a QR code, and prints the
+`[Peer]` stanza to add. It refuses to write a profile anywhere git does not ignore.
+
+Then:
+
+1. Append the stanza to `platform/vpn-ingress/peers.conf`, keeping the
+   `# <name> — <owner>, enrolled <date>` comment. `wg show` can only ever print the key, so that
+   comment is the only record of which stanza belongs to which device.
+2. PR → merge. Flux rolls the DaemonSet (~1 min), because `peers.conf` is a
+   **content-hashed** `configMapGenerator`: editing it changes the ConfigMap's generated name,
+   which changes the pod template, which forces the roll. (It did **not** work this way at first —
+   a fixed-name ConfigMap updates in place, the pod template never changes, and the init container
+   keeps the old peer list forever. Measured on prod 2026-10-06.) Confirm it actually rolled:
+
+   ```bash
+   ./infra/devcontainer/dev.sh run bash -c \
+     'kubectl --context k3s-prod -n vpn-ingress get ds wireguard \
+        -o jsonpath="{.metadata.generation}{\"/\"}{.status.observedGeneration}{\"\n\"}"'
+   ```
+
+   The generation must have **increased** since before the merge. If it is still `1`, the roll did
+   not happen and `wg show` will list no peer no matter how long you wait.
+3. Get the profile onto the device (QR scan for phones; "Import tunnel from file" on
+   Windows/macOS; `/etc/wireguard/<name>.conf` + `wg-quick@<name>` on Linux).
+4. **Delete the profile from your machine**: `shred -u <path>`. It is the only copy of that
+   device's private key — the server never sees it and it cannot be re-derived.
+
+Until the PR is merged the device handshakes and gets silence, exactly like an unknown key.
+
+## Step 6 — verify it end to end (from OFF the LAN)
+
+**This is the only honest test, and it cannot be run from inside the house.** Put the phone on
+cellular, with Wi-Fi off, and check all four — each proves a different hop:
+
+| # | Check | Proves |
+|---|---|---|
+| 1 | tunnel shows a recent handshake in the WireGuard app | the WAN forward + the server key + the peer stanza |
+| 2 | `ping 192.168.2.1` (the router) | decrypt → FORWARD → LAN, and the SNAT return path |
+| 3 | open `https://plex.home.keithjackson.dev` | PiHole DNS over the tunnel **and** the Gateway accepting a `host`-identity source — the specific thing a pod-networked VPN would have 403'd |
+| 4 | visit an IP-echo site; it should show `136.51.115.252` | full-tunnel WAN egress out the house, not the carrier |
+
+Then confirm server-side:
+
+```bash
+./infra/devcontainer/dev.sh run bash -c \
+  'kubectl --context k3s-prod -n vpn-ingress exec ds/wireguard -- wg show'
+# a `latest handshake` under ~3 min, and non-zero transfer, on the expected peer.
+```
+
+**If check 3 fails while 2 passes**, the tunnel is fine and the problem is DNS or the Gateway, not
+WireGuard. Check the client's `DNS = 192.168.2.23` and that PiHole is up.
+
+**If 1 and 2 pass but large transfers hang**, it is MTU. The profile ships `MTU = 1420` (1500 − 60
+bytes of WireGuard encapsulation); drop the client to `1280` and re-test.
+
+**If nothing handshakes at all**, you cannot tell a wrong forward from a wrong key from outside —
+by design. Work inwards: `wg show` on the node holding the forward will show *zero* received bytes
+if the router is not delivering the packets, and a `handshake` with no completed session if it is.
+
+## Revoking a device
+
+Delete its `[Peer]` stanza from `peers.conf`, PR, merge. Nothing else — the key stops working on the
+next reconcile. **Never re-use that address octet**: an old profile would silently start working
+again as a different device.
+
+## Why there is no connection alert
+
+A WireGuard exporter would publish `wireguard_latest_handshake_seconds` per peer and make
+"something connected at 03:00" alertable. It needs a second `NET_ADMIN` container inside the pod
+that terminates the internet-facing tunnel, and that was not worth shipping unverified. **It is the
+top follow-up for this component.** Until then:
+
+* pod-down is covered generically by kube-prometheus-stack's `KubePodNotReady` /
+  `KubeDeploymentReplicasMismatch`;
+* "who is connected" is an on-demand question — `wg show`, above;
+* **never** `wg showconf` — it prints the server's private key.
+
+## Known limitations
+
+* **No IPv6 in the tunnel.** A full-tunnel client with native IPv6 still reaches IPv6 sites outside
+  the tunnel. Functionally harmless; a privacy leak if hiding the client's network was the point.
+* **Client IPs are not preserved** on the LAN side: everything arrives SNATed as the node's
+  address. A static route for `10.90.0.0/24` → the forwarded node, added on the router, would
+  preserve them — at the cost of another hand-maintained off-repo route.
+* **Rollouts briefly drop the forwarded node.** `maxUnavailable: 1`, so one node at a time; clients
+  re-handshake automatically (retry every 5s, rekey every 2 min).