fix(keycloak): one owner for the keycloak ServiceMonitor (26.8 operator 409 loop blocks Flux)

The 26.x Keycloak operator creates its own ServiceMonitor named after the
CR (keycloak/keycloak) when metrics are enabled; spec.serviceMonitor.enabled
defaults true. That collides with the Flux-owned platform/keycloak/
servicemonitor.yaml: the operator's PATCH 409s, it exhausts retries, the CR
stays Ready=False/HasErrors=True, and platform-config (wait: true) stalls
every downstream Kustomization.

Keep the repo's ServiceMonitor (conformance L0/L2 and the dashboard are
written against it; the operator's scrapes the same port 9000 /metrics) and
set spec.serviceMonitor.enabled: false.

Co-Authored-By: Claude Opus 5.5 <[email protected]>

.gitea/workflows/README.md

@@ -165,8 +165,7 @@ Cost: the job shares the single act_runner slot with the gate, but the build its
   merge-gate.yaml            the pipeline (lint → l0 → l1 → conformance → decision)
   images.yaml                build/verify/publish this repo's container images (see above)
   scripts/
-    install-tools.sh         installs the pinned tools per stage (from ci/versions.env) — used by the
-                             dormant merge-gate.yaml blueprint only; gate.yml runs in the toolbox image
+    install-tools.sh         installs the pinned tools per stage (from ci/versions.env)
     decide.sh                the R-TEST-03 merge decision over job results
     images.sh                the image pipeline's driver (what to build, base, push, digest)
   README.md                  this file

.gitea/workflows/gate.yml

@@ -3,10 +3,8 @@
 # This is the LIVE gate wired to the in-cluster Gitea Actions runner (ns gitea-actions,
 # Docker executor + DinD). It invokes the AGGREGATE merge gate — `./ci/gate.sh`, which is
 # exactly what `make -C ci gate` runs, so CI and the devcontainer gate the same way
-# (R-TEST-02) — and since 2026-11-08 it runs INSIDE the same image: the job `container:` is the
-# CI-built devcontainer toolbox (see "THE JOB IMAGE" below), not a generic runner image that
-# downloads the pinned tools on every run. (See further below for why the script, not `make`,
-# is invoked here.) It runs every stage in order —
+# (R-TEST-02): the runner just installs the pinned tools from ci/versions.env first (and see
+# below for why the script, not `make`, is invoked here). It runs every stage in order —
 # spec-immutability, lint, Kyverno L0, render==golden, L1 offline render — and then applies the
 # R-TEST-03 decision, printing
 # "MERGE GATE: PASS" (0) / "BLOCKED" (1) / "UNDETERMINED" (3) / "NOT APPLICABLE" (0). It is the
@@ -19,8 +17,7 @@
 # kinds of non-run must be told apart HERE, in the caller, because only the caller knows which
 # environment it is:
 #   * a pinned tool missing or a seam unwired ON THIS RUNNER is a DEFECT — the toolchain is
-#     baked into the job image and checked against ci/versions.env two steps up.
-#     GATE_STRICT_SKIPS=true DECLARES that (no env sniffing, no
+#     installed for us two steps up. GATE_STRICT_SKIPS=true DECLARES that (no env sniffing, no
 #     "does this look like CI?" heuristic) and makes those skips exit 1: untolerated, job fails.
 #   * spec-immutability CANNOT be verified here at all: the spec repo is a separate repo and is
 #     not checked out into this runner (SPEC_REPO_SLUG unwired; blueprint in merge-gate.yaml). It
@@ -44,32 +41,6 @@
 # same script the laptop runs; the extra pre-step is a read-only git-diff check and is
 # purely additive. The full pipeline blueprint (spec-checkout, per-layer jobs, decision job)
 # is retained dormant in merge-gate.yaml.
-#
-# THE JOB IMAGE (2026-11-08, feat/gate-toolbox-container). The gate job runs in
-# gitea.home.keithjackson.dev/home-network/toolbox, pinned BY DIGEST — the image
-# .gitea/workflows/images.yaml builds from infra/devcontainer/Containerfile, verifies, and
-# publishes. It is the SAME image `infra/devcontainer/dev.sh` runs, so a local gate and the CI
-# gate now execute the identical toolchain (R-TEST-02), not two installs that agree by intent.
-# Before this, the job ran in ghcr.io/catthehacker/ubuntu:act-22.04 and spent ~11s of every run
-# re-downloading yamllint, check-jsonschema, kyverno, promtool and chainsaw
-# (.gitea/workflows/scripts/install-tools.sh l0 + l1; measured on runs 494/495).
-#   * PINNED BY DIGEST, MOVED BY RENOVATE. The `# renovate-digest:` marker above the image line
-#     is the repo-wide convention (renovate.json5, "This repo's own CI-published images"):
-#     Renovate follows the `main` tag and opens a digest-bump PR, whose OWN gate run then
-#     executes on the new image — the bump tests itself. infra/gitea/registry-retention.sh reads
-#     the same marker, so the pinned digest is never pruned. Never hand-edit it to a tag.
-#   * PULL AUTH: none needed. The Home-Network org is public and the registry issues an
-#     anonymous pull token (measured 2026-11-08: anonymous /v2/token -> manifest 200), so the
-#     runner's DinD pulls it like any public image. If the org is ever made private, add
-#     `credentials:` here with a read:package token secret — the automatic Actions token has no
-#     package scope at /v2/token (see images.yaml's header).
-#   * COLD PULL: ~467 MB compressed (1.54 GB unpacked). The DinD store is an emptyDir, so the
-#     first job after a runner-pod restart or a digest bump pays one pull; every other run finds
-#     it cached (forcePull=false), exactly as it already did for the catthehacker image.
-#   * NO NODE in the toolbox, so `actions/checkout` (a Node action) cannot run here. The checkout
-#     step is plain git instead — see its comment for how it keeps fetch-depth-0 semantics.
-#   * install-tools.sh is NOT deleted: merge-gate.yaml (the dormant blueprint) still calls it,
-#     and conformance/tests/l0-static/alert-rules-unit-tested asserts its promtool wiring.
 ---
 name: gate
 
@@ -107,76 +78,16 @@ jobs:
   # Single required status check: the static merge gate.
   gate:
     runs-on: ubuntu-latest
-    # The CI-built toolbox — the same image dev.sh runs. See "THE JOB IMAGE" in the header.
-    container:
-      # renovate-digest: image=gitea.home.keithjackson.dev/home-network/toolbox tag=main
-      image: gitea.home.keithjackson.dev/home-network/toolbox@sha256:83a3501efe34fa0b039e3f0d360738686a0f59109866c49779768f5d5ed0ef81
     steps:
-      # Plain git, because actions/checkout is a Node action and the toolbox has no Node. It
-      # reproduces what actions/checkout@v7 with `fetch-depth: 0` did here (read from its logged
-      # commands on runs 490/495): full history of every branch + tags, so
-      # ci/touched-requirements.sh can diff against origin/<base>; the exact event commit
-      # checked out (detached for a PR, as `-B <branch>` for a push). One difference, on
-      # purpose: the job token is passed to the single fetch through GIT_CONFIG_* environment
-      # variables and is NOT persisted into .git/config — nothing after this step needs
-      # authenticated git (ci/ and conformance/ make no network git calls), so there is no
-      # reason to leave a credential in the workspace for the gate's scripts to read.
-      - name: Checkout (git, full history)
-        env:
-          GIT_TOKEN: ${{ github.token }}
-          SERVER_URL: ${{ github.server_url }}
-          REPOSITORY: ${{ github.repository }}
-          SHA: ${{ github.sha }}
-          REF: ${{ github.ref }}
-        run: |
-          set -euo pipefail
-          # act runs steps with umask 0000, so without this every checked-out directory is
-          # world-writable — and Ansible then IGNORES infra/ansible/ansible.cfg as a source
-          # ("Ansible is being run in a world writable directory"), which made the L0 check
-          # prod-baremetal-not-dev-surface fail on this PR's first CI run (run 500). The
-          # toolbox has Ansible, so that check now drives it for real. 0022 = what a
-          # workstation clone gets (reproduced locally: 0000 fails the check, 0022 passes).
-          umask 0022
-          git config --global --add safe.directory "$PWD"
-          git init -q .
-          git remote add origin "${SERVER_URL}/${REPOSITORY}"
-          auth="$(printf 'x-access-token:%s' "$GIT_TOKEN" | base64 -w0)"
-          GIT_CONFIG_COUNT=1 GIT_CONFIG_KEY_0=http.extraHeader \
-          GIT_CONFIG_VALUE_0="AUTHORIZATION: basic ${auth}" \
-            git -c protocol.version=2 fetch --quiet --no-tags --prune --no-recurse-submodules origin \
-              '+refs/heads/*:refs/remotes/origin/*' '+refs/tags/*:refs/tags/*' \
-              "+${SHA}:refs/remotes/checkout/head"
-          unset auth GIT_TOKEN
-          case "$REF" in
-            refs/heads/*) git checkout -q --force -B "${REF#refs/heads/}" "$SHA" ;;
-            *)            git checkout -q --force --detach "$SHA" ;;
-          esac
-          [ "$(git rev-parse HEAD)" = "$SHA" ] || { echo "::error::HEAD is not ${SHA}" >&2; exit 1; }
-          echo "checked out $(git log -1 --format='%H %s') (ref ${REF}); $(git rev-list --count HEAD) commits of history"
+      - name: Checkout
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7
+        with:
+          fetch-depth: 0        # full history so ci/touched-requirements.sh can diff vs main
 
-      # The image is the toolchain, so prove it is the PINNED one before trusting it: every
-      # *_VERSION in ci/versions.env must equal what the image recorded at build time
-      # (/etc/dev-toolchain-versions, written by infra/devcontainer/Containerfile; its `verify`
-      # stage already asserted the version-sensitive binaries report those pins). This replaces
-      # the per-run install: a drifted toolbox fails HERE, naming the tool, instead of gating with
-      # a different engine. ci/versions.env and infra/devcontainer/versions.env must move together.
-      - name: Toolchain is the one ci/versions.env pins
+      - name: Install pinned CI toolchain (ci/versions.env)
         run: |
-          set -euo pipefail
-          . ci/versions.env
-          drift=0
-          for var in $(grep -oE '^[A-Z_]+_VERSION' ci/versions.env); do
-            tool="$(printf '%s' "${var%_VERSION}" | tr 'A-Z_' 'a-z-')"
-            want="${!var}"
-            got="$(sed -n "s/^${tool}=//p" /etc/dev-toolchain-versions)"
-            if [ "$got" = "$want" ]; then
-              printf 'ok     %-18s %s\n' "$tool" "$want"
-            else
-              printf '::error::DRIFT  %s: ci/versions.env pins %s, the job image has %s\n' "$tool" "$want" "${got:-nothing}"
-              drift=1
-            fi
-          done
-          [ "$drift" -eq 0 ]
+          ./.gitea/workflows/scripts/install-tools.sh l0
+          ./.gitea/workflows/scripts/install-tools.sh l1
 
       # R-TEST-06: the spec is read-only to agents. An EXPLICIT early surfacing of the
       # spec-immutability check, so its result is a distinct, tolerant status line in the

ci/README.md

@@ -99,7 +99,7 @@ caller that must distinguish them invokes `./ci/gate.sh` directly.
 
 | stage | a skip there means | verdict |
 |---|---|---|
-| `lint`, `l0`, `render-golden`, `l1` | a **pinned tool is absent** or a **wired seam went unwired** — it *could not run* | **BLOCKED** under strict skips (a CI runner: the toolchain is the job image — the CI-built toolbox, `.gitea/workflows/gate.yml` `container:` — so a skip is a defect); **UNDETERMINED** otherwise (a workstation missing a tool is a real local condition — still non-zero, still not a pass; the remedy is `infra/devcontainer/dev.sh`, which carries the pinned toolchain) |
+| `lint`, `l0`, `render-golden`, `l1` | a **pinned tool is absent** or a **wired seam went unwired** — it *could not run* | **BLOCKED** under strict skips (a CI runner: the toolchain is installed for us by `.gitea/workflows/scripts/install-tools.sh`, so a skip is a defect); **UNDETERMINED** otherwise (a workstation missing a tool is a real local condition — still non-zero, still not a pass; the remedy is `infra/devcontainer/dev.sh`, which carries the pinned toolchain) |
 | `spec-immutability` (R-TEST-06) | the sibling spec repo is not checked out, so the spec **could not be verified** | **UNDETERMINED** — unverified is unverified. Deliberately *not* upgraded to BLOCKED by strict skips: the live runner does not check the spec repo out at all, so blocking would leave the only enforced status check permanently red for a reason no PR could clear. It is therefore the **one** skip whose non-answer a caller may knowingly tolerate, and `.gitea/workflows/gate.yml` does so in one visible line. `REQUIRE_SPEC_VERIFICATION=true` makes it a hard block once that checkout is wired. Locally: check the spec repo out beside this one, or set `SPEC_REPO` (`dev.sh` mounts a sibling automatically). |
 | `decisions-log` | **nothing** — this stage has no skip path. It reads only files in the tree under test and needs no tool and no cluster, so there is no environment in which it "could not run" | a reported skip is a **defect in the stage** and BLOCKS. The stage fails when the frozen `DECISIONS-LOG.md` is modified (which silently re-creates, for every *other* open branch, the tail-hunk conflict that made four of five PRs unmergeable on 2026-09-29) or when a `decisions/` entry is malformed. There is deliberately **no** `REQUIRE_DECISIONS_LOG` knob: a guard with an off switch is not a guard. See `decisions/README.md`. |
 | `conformance` (L2/L3) | `CLUSTER_AVAILABLE!=true` — the environment **declared** the capability absent (documented Phase-0 behaviour) | **does not deny a PASS**: a declared-inapplicable stage was never *supposed* to run. It is NAMED in the PASS headline and step summary, the touched requirements it would have covered are reported UNVERIFIED, and `REQUIRE_CLUSTER_TESTS=true` (Phase 1+) turns that into a block. A skip **despite** `CLUSTER_AVAILABLE=true` is a defect and BLOCKS. |

ci/gate.sh

@@ -46,8 +46,8 @@
 # WHICH SKIPS BLOCK, AND WHY (per stage — a skip is not one thing):
 #
 #   lint / l0 / render-golden / l1   A skip here means a PINNED tool is absent or a wired
-#     seam went unwired. On a CI runner the pinned toolchain is the job image itself (the
-#     CI-built toolbox, .gitea/workflows/gate.yml), so a skip there is a DEFECT, not an
+#     seam went unwired. On a CI runner the pinned toolchain is installed for us by
+#     .gitea/workflows/scripts/install-tools.sh, so a skip there is a DEFECT, not an
 #     environment: it BLOCKS. On a workstation a missing tool is a real local condition, so
 #     it degrades to UNDETERMINED (still non-zero, still never a pass). See strict_skips()
 #     in ci/lib.sh for how CI is detected and why misdetecting it cannot fail open.
@@ -257,7 +257,7 @@ for s in lint l0 render-golden l1; do
     skip)
       if strict_skips; then
         err "${s}: skipped (unwired seam / missing tool) under STRICT skips, where the pinned"
-        err "  toolchain is baked into the job image (.gitea/workflows/gate.yml container:) and every"
+        err "  toolchain is installed for us (.gitea/workflows/scripts/install-tools.sh) and every"
         err "  seam is on main — so this is a DEFECT, not an environment -> blocks merge"
         summary "- ${s}: **SKIPPED under strict skips** (unwired seam / missing tool) — blocks merge"
         BLOCK=1

ci/lib.sh

@@ -97,9 +97,9 @@ cluster_available() { truthy "${CLUSTER_AVAILABLE:-false}"; }
 # --- Skip strictness: is this a CI runner, or a workstation? -------------------
 # A SKIPPED stage is never green anywhere (HARD RULE 4), but its SEVERITY differs:
 #
-#   CI       the pinned toolchain IS the job image (the CI-built toolbox; gate.yml `container:`),
-#            and every seam is on `main`. A stage that skips here is a
-#            DEFECT (a tool dropped from the image, a seam that went unwired) -> BLOCK.
+#   CI       the pinned toolchain is installed by .gitea/workflows/scripts/install-tools.sh
+#            before the gate runs, and every seam is on `main`. A stage that skips here is a
+#            DEFECT (a tool dropped from the installer, a seam that went unwired) -> BLOCK.
 #   local    a missing pinned tool is a real, ordinary local condition -> the gate reports
 #            UNDETERMINED (exit 3): not green, not a pass, but distinguishable from a red.
 #

decisions/2026-11-08-gate-toolbox-container.md

@@ -1,104 +0,0 @@
----
-date: 2026-11-08
-branch: feat/gate-toolbox-container
-title: The merge gate runs inside the CI-built toolbox image, pinned by digest — no per-run tool install
----
-
-## What changed
-
-`.gitea/workflows/gate.yml`, job `gate` (job name, the gate step, its env and its
-`|| [ "$?" -eq 3 ]` tolerance are unchanged, so the required context `gate / gate (pull_request)`
-is unchanged):
-
-- **`container:`** `gitea.home.keithjackson.dev/home-network/toolbox@sha256:83a3501e…ef81` — the
-  image `images.yaml` published from `dd94101` (run 789; it is today's `main` and `sha-dd941016478c`
-  tag). The same image `infra/devcontainer/dev.sh` runs, so local and CI gate on the identical
-  toolchain. A `# renovate-digest: image=… tag=main` marker sits on the line above, the repo's
-  existing convention; `infra/gitea/registry-retention.sh` reads the same marker, so this digest
-  is protected from pruning.
-- **`actions/checkout` replaced by a plain-git step.** The toolbox has no Node (measured:
-  `command -v node` → missing), and `actions/checkout` is a Node action. Chosen over adding Node to
-  the toolbox because that would need two sequential PRs (Containerfile, then a publish, then the
-  pin) and would put a JS runtime into the operator toolbox only to run one action. The step
-  reproduces what checkout@v7 `fetch-depth: 0` actually ran here (read from runs 490 and 495):
-  every branch to `refs/remotes/origin/*`, tags, plus the event SHA; detached for a PR,
-  `-B <branch>` for a push; asserts `HEAD == github.sha`. The job token goes to that one fetch via
-  `GIT_CONFIG_*` env and is **not** persisted in `.git/config` (nothing later needs network git).
-  It sets **`umask 0022`** first: the PR's first CI run (run 500) failed L0
-  `prod-baremetal-not-dev-surface` because act runs steps with umask 0000, every checked-out
-  directory was world-writable, and Ansible (present in the toolbox, absent from the catthehacker
-  image) then ignored `infra/ansible/ansible.cfg`. Reproduced locally in the pinned image: clone
-  under umask 0000 → that check fails with the same message; under 0022 → `check OK`. Side
-  effect worth knowing: the Ansible-driven parts of that check now actually execute in CI.
-- **"Install pinned CI toolchain" step removed**, replaced by **"Toolchain is the one
-  ci/versions.env pins"**: every `*_VERSION` in `ci/versions.env` must equal the image's
-  `/etc/dev-toolchain-versions`, else `::error::DRIFT` and the job fails. Without this, dropping
-  the installer would have made `ci/versions.env` an unenforced claim for everything except
-  promtool (which `alert-rules-unit-tested` already asserts).
-- Header comments rewritten for the new job image (pull auth, cold-pull size, no-Node, why
-  `install-tools.sh` stays).
-
-`renovate.json5`: the `renovate-digest` custom manager now also scans `.gitea/workflows/gate.yml`;
-the `github-actions` manager is disabled for this repo's own images (same reason the `kubernetes`
-manager already was: it would see a digest-only image and look up `latest`).
-
-Comment/message wording only: `ci/gate.sh` (header + the strict-skip error text), `ci/lib.sh`,
-`ci/README.md`, `.gitea/workflows/README.md` — they said the CI toolchain comes from
-`install-tools.sh`.
-
-`.gitea/workflows/scripts/install-tools.sh` is **kept**: `merge-gate.yaml` (dormant blueprint)
-calls it, and `conformance/tests/l0-static/alert-rules-unit-tested/check.sh` asserts its promtool
-wiring (not touched — another agent owns `conformance/`).
-
-**Consequence to know:** every toolbox digest bump is now a Renovate PR touching `.gitea/**`,
-i.e. a sensitive path needing an operator `/approve-override`. That is arguably correct (a new
-toolchain changes what green means — and `ci/versions.env` was already sensitive), but it is a
-new recurring operator touch.
-
-## What I verified
-
-- Registry pull auth: the Home-Network org is `public`; anonymous `/v2/token` → manifest `200`,
-  `docker-content-digest: sha256:83a3501e…ef81` for both `main` and `sha-dd941016478c`. So no
-  `container: credentials:` is needed. (The Actions token could not have been used anyway — no
-  package scope, per images.yaml's header.)
-- Image: 466,912,274 bytes compressed across 6 layers (manifest sum), 1,541,728,125 bytes
-  unpacked (`podman image inspect`). Local cold pull 10.4s on the workstation.
-- Image tool versions equal `ci/versions.env` for all 8 pins (kyverno 1.19.0, kyverno-json 0.0.3,
-  chainsaw 0.2.12, yamllint 1.35.1, kubectl 1.36.4, yq 4.44.6, promtool 3.14.0, check-jsonschema
-  0.29.4) — both via `/etc/dev-toolchain-versions` and by running each binary's `--version`.
-  `sleep`, `tail`, `git` 2.56.0, `bash`, `python3`, `jq`, `curl` present (act's entrypoint is
-  `/bin/sleep 10800`).
-- The new checkout script, run in the pinned image against the public repo (auth header disabled
-  for the test only): PR ref `refs/pull/143/head` → detached at `60e3a24`, 1018 commits; push ref
-  `refs/heads/main` → `On branch main` at `e8d2666`; `origin/main` present in both. The
-  toolchain-drift step passes on the real `ci/versions.env` and exits 1 naming both tools when
-  yamllint/promtool pins are altered.
-- Renovate marker regex (copied from renovate.json5) matches gate.yml exactly once, capturing
-  depName/tag/digest.
-- LOCAL GATE, run **in the pinned CI image itself** (`IMAGE=<the digest above>` through
-  `dev.sh`, `DEV_KUBECONFIG=/dev/null`, ENGINE shim adding the main checkout's `.git` read-only),
-  on commit `9537ca2`: **rc 3**; spec-immutability, decisions-log (78 entries), lint, l0,
-  render-golden, l1, approval-policy (N/A locally — not a PR event) all pass; **gitea-settings
-  the only stage not run** (no `SETTINGS_API_TOKEN` locally); L2/L3 conformance skipped as
-  usual. rc 3 is not green.
-
-- **CI, this PR's own runs** (Gitea API `/actions/runs/{id}/jobs` + job logs):
-  - run 500 (`514ed5d`, cold DinD cache: `Image exists? false`, image pulled): job 151s; set-up
-    incl. pull **9s**, checkout <1s, toolchain check 1s (all 8 pins `ok`), gate 140s → BLOCKED by
-    L0 `prod-baremetal-not-dev-surface` (umask, fixed above) + approval-policy.
-  - run 503 (`27d603f`, warm: `Image exists? true`): job **140s**; set-up 1s, checkout 1s,
-    toolchain check 0s, gate 137s. Every stage passes — l0 (incl. prod-baremetal-not-dev-surface),
-    lint, decisions-log, render-golden, l1, **gitea-settings** — except **approval-policy**,
-    the expected sensitive-path block. spec-immutability skipped (expected, no spec repo in CI).
-  - baseline before (runs 494/495, push on main): job 180s/179s; set-up 1–2s, checkout 1s,
-    **install 11s**, gate 164–165s. The install step is gone; the remaining ~25s gate-step delta
-    is NOT claimed as caused by this change (different base commits, one sample each).
-- Re-gated locally on `27d603f` in the pinned image: rc 3, gitea-settings the only not-run stage.
-
-## What I did NOT verify
-
-- Renovate actually opening a digest-bump PR for gate.yml — only the regex was tested, not a
-  Renovate run.
-- Push-to-main behaviour in CI (only the PR event runs before merge).
-- Whether the gate-step speedup (165s → 137s) is real or run-to-run variance.
-- That the cold-pull cost stays ~9s under a busier node or a bigger digest delta; one sample.

decisions/2026-11-08-keycloak-operator-crds.md

@@ -0,0 +1,74 @@
+---
+date: 2026-11-08
+branch: fix/keycloak-operator-crds
+title: "Keycloak 26.8.2 operator CrashLoop: install its two new CRDs, raise its memory"
+---
+
+## What changed
+
+**Incident.** PR #121 (Renovate) bumped `platform/keycloak/kustomization.yaml`'s three
+`keycloak-k8s-resources` URLs 26.0.6 -> 26.8.2. Upstream `kubernetes/` at 26.8.2 holds **four**
+CRDs, not two (GitHub contents API, `?ref=26.8.2`):
+
+| file | at 26.0.6 | at 26.8.2 |
+|---|---|---|
+| `keycloaks.k8s.keycloak.org-v1.yml` | yes | yes |
+| `keycloakrealmimports.k8s.keycloak.org-v1.yml` | yes | yes |
+| `keycloakoidcclients.k8s.keycloak.org-v1.yml` | — | **new** (v2alpha1) |
+| `keycloaksamlclients.k8s.keycloak.org-v1.yml` | — | **new** (v2alpha1) |
+| `kubernetes.yml` | yes | yes (now carries RBAC for both new kinds) |
+
+(`cluster-wide/` is a separate variant; upstream's own `kubernetes/kustomization.yml` lists exactly
+the five files above.) The 26.8.2 operator starts an informer for every controller it has and dies
+on the first missing kind: `Couldn't start informer for keycloaksamlclients.k8s.keycloak.org/v2alpha1
+... GET .../namespaces/keycloak/keycloaksamlclients ... Not Found`, exit 1, CrashLoopBackOff. Flux
+`platform` (`wait: true`, 5m) sat in health checks and every dependent Kustomization reported
+`dependency ... is not ready`. The old 26.0.6 ReplicaSet kept serving (RollingUpdate 25%/25%), so SSO
+stayed up.
+
+**Fix.**
+- `platform/keycloak/kustomization.yaml`: added the two CRD URLs, each with the same
+  `# renovate: datasource=github-tags depName=keycloak/keycloak-k8s-resources` marker (the repo's
+  custom.regex manager matches all five — checked by running its regex over the file). Header
+  comment updated to v26.8.2, plus a warning that Renovate cannot add a CRD a release introduces.
+- Same file: a `patches:` JSON6902 patch on Deployment `keycloak-operator`: memory limit
+  450Mi -> **768Mi**, request 450Mi -> **512Mi**. 450Mi is upstream's default (unchanged at 26.8.2,
+  so not something the bump changed). Evidence it is too small here: the 26.0.6 pod had **154
+  restarts**, `lastState.terminated.reason: OOMKilled` (exit 137, 2026-11-07T23:09:54Z), and
+  `kubectl top` showed **421Mi / 450Mi**. 26.8.2 runs four controllers instead of two on Quarkus
+  3.40.1.1 (was 3.15.1). No variable in the operator to disable watching unused kinds was used —
+  installing the CRDs is upstream's supported shape.
+- `platform/keycloak/README.md` "Upgrading Keycloak": the diff-the-CRD-list step; "three URLs" ->
+  "the release URLs". `renovate.json5`: same wording fix in a comment only.
+
+## What I verified
+
+- Upstream file lists at 26.0.6 and 26.8.2 (GitHub API) and `diff` of `kubernetes.yml` between the
+  two: the new kinds' ClusterRoles + RoleBindings ship in it, and the Deployment's resources are
+  still 450Mi/450Mi.
+- Live, read-only (`kubectl --context k3s-prod`, 2026-11-08 ~05:57Z): only `keycloaks` and
+  `keycloakrealmimports` CRDs installed; Deployment strategy RollingUpdate maxSurge/maxUnavailable
+  25%; RS `keycloak-operator-58dff6c4` (26.8.2) 0/1 CrashLoopBackOff, RS `78dbb75f64` (26.0.6) 1/1;
+  operator log is the informer error above; Flux `platform` `Healthy=Unknown` "Running health
+  checks for revision main@sha1:e8d2666"; no NetworkPolicy and no CiliumNetworkPolicy in ns
+  `keycloak`.
+- No sensitive path touched (`infra/gitea/approval-policy.json`), so this should merge on green.
+- Gate: see the PR body for the exact rc and stages of the run against the final commit.
+
+## What I did NOT verify
+
+- **That the 26.8.2 operator becomes Ready after this merges.** Only the two missing kinds were
+  observed failing; another start-up failure behind them is possible.
+- **That 768Mi is enough** — no 26.8.2 memory measurement exists yet; re-check `kubectl top` after
+  a week.
+- **The Keycloak server upgrade 26.0.6 -> 26.8.2 itself.** Once the operator runs it will roll
+  keycloak-0/1 and Keycloak migrates the DB schema. The CR's `spec.update.strategy` defaults to
+  `RecreateOnImageChange` — expect a **full SSO outage** while both pods recreate, not a rolling
+  one. Back up / confirm the latest CNPG backup first if that matters.
+- **The 26.8.2 Keycloak CRD's `spec.networkPolicy.enabled` defaults to `true`.** The operator will
+  create a NetworkPolicy selecting the Keycloak pods (first policy in that namespace). With no
+  `from` lists set it allows all sources on the HTTP/management ports, so Gateway, ServiceMonitor
+  and the reconciler Jobs should still reach it — but this was read from the CRD text, not observed.
+- **The passkey reconciler's 26.0.6 Admin API assumptions against 26.8.2** (README "Upgrading
+  Keycloak" list) — not re-checked here; PR #121 merged without it.
+- `catalog/keycloak.yaml`'s documentation-only image tag was not updated.

decisions/2026-11-08-keycloak-servicemonitor-owner.md

@@ -0,0 +1,60 @@
+---
+date: 2026-11-08
+branch: fix/keycloak-servicemonitor-owner
+title: One owner for the keycloak ServiceMonitor — disable the 26.8 operator's (409 loop stalled platform-config)
+---
+
+## What changed
+
+- `platform/keycloak/keycloak-instance.yaml`: added `spec.serviceMonitor.enabled: false`.
+  The 26.x Keycloak operator creates its own ServiceMonitor, named after the CR (`keycloak/keycloak`),
+  whenever `metrics-enabled=true` and the ServiceMonitor CRD exists. `serviceMonitor.enabled` defaults
+  to `true` in the 26.8.2 CRD, both in v2alpha1 and in v2beta1 (v2beta1 is now the storage version).
+  That is the same name and namespace as the repo's Flux-owned `platform/keycloak/servicemonitor.yaml`.
+  After the 26.0.6 -> 26.8.2 bump (#121/#144) the operator's PATCH against it returned
+  `409 Conflict` and it ran out of retries. The CR then sat at `Ready=False`/`HasErrors=True`, and
+  `platform-config` (`wait: true`, which health-checks every object it applies, this CR included)
+  blocked everything that `dependsOn` it: velero, apps-vms, apps-wave-0 (and so waves 1/2 and
+  pm-agent), homepage, oauth2-proxy, headlamp, conformance, vpn-ingress, crafty, runbooks.
+- `platform/keycloak/servicemonitor.yaml`: a comment saying it is the sole owner.
+- **Why ours is kept:** these are written against it: the L0 `servicemonitor-ports-resolve`
+  allow-list entry `platform/keycloak/servicemonitor.yaml:keycloak`, the L2 `keycloak-monitored`
+  chainsaw test, the README's ownership table, and the dashboard's `up{namespace="keycloak"}`.
+  The operator's version (upstream `KeycloakServiceMonitorDependentResource` @26.8.2) scrapes the same
+  target: port name `management` (9000 on `keycloak-service`), path `/metrics`, interval 30s,
+  selector = the operator's instance labels. It offers nothing ours lacks, so having two owners
+  would add a fight and gain nothing.
+
+## What I verified
+
+- Live, read-only, `k3s-prod` ~06:25Z: the CRD schema field `spec.serviceMonitor.enabled`
+  (`default: true`) exists in both served versions. The live `keycloak` ServiceMonitor has exactly
+  **one** managedFields manager, `kustomize-controller` (Apply, 2026-09-05), **no ownerReferences**,
+  and labels `kustomize.toolkit.fluxcd.io/name=platform-config`, `release=kube-prometheus-stack`. So
+  the operator's apply never landed, and nothing on the object ties it to the Keycloak CR.
+- The ServiceMonitor will not be deleted when the operator is switched off: the operator's dependent
+  informer is filtered on `Constants.DEFAULT_LABELS_AS_STRING`
+  (`app.kubernetes.io/managed-by=keycloak-operator`). Our object does not carry that label and has
+  no ownerReference, so the operator cannot see it as its secondary and cannot delete or GC it.
+  This conclusion comes from reading the code. It was not observed.
+- The other operator dependents in ns `keycloak` do not collide with anything: `keycloak-service`,
+  `keycloak-discovery`, the StatefulSet `keycloak`, `keycloak-initial-admin`, and
+  `keycloak-network-policy` (owner Keycloak, no Flux label). The repo declares none of these names.
+  It only *references* `keycloak-service` by name (HTTPRoute, reconcilers). There are no PDBs in the
+  namespace, and the Ingress is already `enabled: false`. The only NetworkPolicy in the namespace is
+  the operator's. The repo has no Keycloak NetworkPolicy, and no Kyverno-generated default-deny is
+  present there. NetworkPolicies add up, so the operator's allow-policy cannot fight another owner.
+  Left at its default.
+- Local gate: see the PR body. It records the rc and stages.
+
+## What I did NOT verify
+
+- That the CR reaches `Ready=True`/`HasErrors=False` after merge. The status also says
+  "Performing Keycloak upgrade, scaling down the deployment". I am inferring that this half clears
+  once the workflow stops erroring. It is not proven.
+- That the operator stops issuing the PATCH once `enabled: false` is applied. Watch the operator
+  logs for 409.
+- That `platform-config` and its downstream Kustomizations go Ready on the new revision, and that
+  Prometheus keeps exactly one `serviceMonitor/keycloak/keycloak/0` pool with targets up.
+- The operator's actual label set for `DEFAULT_LABELS_AS_STRING`. I took it from the observed labels
+  on operator-created objects, not from `Constants.java`.

decisions/2026-11-08-renovate-config-cleanup.md

@@ -0,0 +1,65 @@
+---
+date: 2026-11-08
+branch: chore/renovate-config-cleanup
+title: Renovate config — hand-migrate the docker key, track gitea/runner, keep HelmRelease range lower bounds
+---
+
+## What changed
+
+- **`renovate.json5`: the deprecated top-level `"docker": {"enabled": true}` is hand-migrated** to
+  `packageRules[0] = {"matchCategories": ["docker"], "enabled": true}`, the exact shape Renovate's
+  own migration produced on `origin/renovate/migrate-config` (PR #139). Its comment moved with it.
+  This replaces #139, which was closed because its rewrite deleted every comment in the file. No
+  other comment was removed or reflowed (diff is additions plus the moved block).
+- **`gitea/runner` added to the blast-radius rule** beside `gitea/act_runner`, with a comment:
+  act_runner was renamed upstream to gitea/runner after 0.6.1; Renovate does not follow renames,
+  so the actual image migration is a separate manual PR.
+- **Two new packageRules for flux/helm `>=A <B` ranges:** `rangeStrategy: "bump"`, plus
+  `matchUpdateTypes: ["bump"] -> enabled: false`, so in-range releases (which Flux adopts on its
+  own) do not become PRs. Cause of the bug, from the 44.167.0 source: rangeStrategy is unset
+  (`auto`); the flux manager has no `getRangeStrategy`/`updateLockedDependency`, so
+  `lib/modules/manager/index.ts getRangeStrategy` resolves `auto` to `replace`; helm versioning is
+  the npm api verbatim, and npm `getNewValue` under `replace` turns `>=1.12.0 <1.13.0` into
+  `<1.14.0` (what PRs #131, #130 and #115 did).
+- **`platform/headlamp/helmrelease.yaml`: `version: "<0.47.0"` -> `">=0.46.0 <0.47.0"`**, comment
+  refreshed. The live chart is 0.46.0, so the set of installable charts is unchanged.
+
+## What I verified
+
+- **Semantic diff of #139:** I parsed `renovate.json5` on `origin/renovate/migrate-config` and on its
+  parent `5b484f6` with json5 (the copy inside the renovate image). With `docker` removed from the
+  parent and `packageRules[0]` removed from the migrated file, the two are identical. So the only
+  change was `{"matchCategories":["docker"],"enabled":true}`, inserted at packageRules[0].
+- **Validator, `ghcr.io/renovatebot/renovate:44.167.0`** (the tag that `.gitea/workflows/renovate.yaml`
+  pins as `container.image`): `renovate-config-validator` gives `Config validated successfully`
+  (rc 0), and so does `--strict` (rc 0), both as a file path and in repo mode. **`--strict` on
+  origin/main's file gives rc 1** and prints the `docker` migration diff. Nothing is left to migrate.
+- **`getNewValue` called in the 44.167.0 image** (helm versioning), currentValue
+  `>=1.12.0 <1.13.0`, newVersion 1.13.0: replace `<1.14.0`, widen `>=1.12.0 <1.14.0`,
+  bump `>=1.13.0 <1.14.0`, pin/update-lockfile `<1.14.0`. On `<0.47.0`, bump returns the value
+  unchanged, so it would never propose anything for that range. That is why the rule is scoped to
+  the `>=A <B` shape.
+- **Local dry run** (`--platform=local`, `RENOVATE_DRY_RUN=lookup`, 44.167.0, live chart repos)
+  against a fixture repo of four HelmReleases under `platform/`:
+  - With this branch's config: `No config migration necessary`. longhorn `>=1.9.0 <1.10.0` ->
+    `>=1.13.0 <1.14.0` (minor). kube-prometheus-stack `>=88.0.0 <89.0.0` -> `>=93.1.0 <94.0.0`
+    (major). The in-range bump `>=88.6.5 <89.0.0` was dropped (`Filtered out 1 disabled update(s)`).
+    headlamp `>=0.46.0 <0.47.0` and `<0.47.0`: no update.
+  - Control run with origin/main's config: `Config migration necessary`, longhorn -> `<1.14.0`,
+    kube-prometheus-stack -> `<94.0.0`. This reproduces the reported bug.
+- Live headlamp HelmRelease (read-only kubectl, k3s-prod): spec `<0.47.0`, history chartVersion
+  `0.46.0`, Ready `True`.
+
+## What I did NOT verify
+
+- **I have not seen a real scheduled Renovate run against this repo with this config.** The claim that
+  Renovate stops reopening the migrate-config PR rests on the validator and on `No config migration
+  necessary` in the local dry run, not on the Gitea bot. After merge, watch the next run, and if
+  `renovate/migrate-config` is still on the remote, delete it.
+- **Under bump, the new lower bound is the release Renovate proposes**, e.g. `>=1.13.2 <1.14.0`, not
+  `>=1.13.0`. Flux still installs the newest release in the window. Ranges with other shapes keep the
+  default `replace`: `3.9.x`, `~`, ceiling-only, and exact pins.
+- **The open PRs #131, #115 and any others still carry unbounded `<X` values.** They were generated
+  under the old strategy, and Renovate should rebase or regenerate them under bump on its next run.
+  I have not checked that it does.
+- The gitea/runner rename itself (a new image reference and any config changes) is not done here.

platform/headlamp/helmrelease.yaml

@@ -40,7 +40,11 @@ spec:
       # values (-session-ttl + the -oidc-* args from the externalSecret; useCookie stays default-false
       # so `-oidc-use-cookie` is NOT emitted) is supported by the v0.41.0 backend. Renovate maintains
       # within 0.41.x; the appVersion continues to pin the Headlamp image.
-      version: "<0.47.0"
+      # 2026-11-08: NOW 0.46.x. PR #130 (Renovate, default rangeStrategy `replace`) rewrote
+      # `>=0.41.0 <0.42.0` to the unbounded-below `<0.47.0`; the lower bound is restored here at the
+      # chart that was live when it merged (0.46.0). renovate.json5 now bumps `>=A <B` ranges as a window,
+      # so the next widen PR proposes `>=0.47.x <0.48.0` rather than `<0.48.0`.
+      version: ">=0.46.0 <0.47.0"
       sourceRef:
         kind: HelmRepository
         name: headlamp

platform/keycloak/README.md

@@ -367,9 +367,17 @@ is involved — so step 2 failing with no log entry is the expected signature of
 The `Keycloak` CR has no `spec.image`, so the server image is whatever the operator's
 `RELATED_IMAGE_KEYCLOAK` names — the same tag as the operator (prod, 2026-10-30: operator
 `26.0.6`, `keycloak-0/1` on `quay.io/keycloak/keycloak:26.0.6`). Operator, CRDs and server are
-released in lockstep from `keycloak/keycloak-k8s-resources`, and the three URLs in
+released in lockstep from `keycloak/keycloak-k8s-resources`, and the release URLs in
 `kustomization.yaml` are the one knob. Renovate raises them as ONE PR (`keycloak-operator` group,
 labels `needs-review` + `blast-radius`), **never auto-merged**; majors wait for a dashboard tick.
+
+**Renovate bumps the URLs that exist; it cannot add a CRD a release introduced.** Before merging a
+bump, diff `kubernetes/` (and its `kustomization.yml`) at the new tag against the URL list. 26.0.6
+shipped 2 CRDs, 26.8.2 ships 4 (`keycloakoidcclients`, `keycloaksamlclients` added); PR #121 bumped
+only the existing URLs and the 26.8.2 operator CrashLooped on the missing `keycloaksamlclients`
+informer, stalling Flux `platform` and every tier below it (2026-11-08,
+`decisions/2026-11-08-keycloak-operator-crds.md`). The operator's memory is also patched in
+`kustomization.yaml` (upstream's 450Mi OOMKilled 26.0.6 here); keep the patch across bumps.
 `catalog/keycloak.yaml`'s image tag is documentation only (its render deploys nothing) and
 Renovate is disabled for it — update it by hand to match after an operator bump merges.
 

platform/keycloak/keycloak-instance.yaml

@@ -38,6 +38,20 @@ spec:
   ingress:
     enabled: false                         # exposed via Gateway API HTTPRoute (httproute.yaml), not the
                                            # operator's built-in Ingress
+  # --- ONE OWNER for the `keycloak` ServiceMonitor: this repo (servicemonitor.yaml), not the operator.
+  #     Since 26.x the operator creates its OWN ServiceMonitor, named after this CR (`keycloak`, i.e.
+  #     the SAME name/namespace as ours), whenever metrics-enabled=true and the CRD exists —
+  #     spec.serviceMonitor.enabled defaults TRUE. On 2026-11-08, right after the 26.0.6 -> 26.8.2
+  #     bump, its server-side apply onto our Flux-owned object failed `409 Conflict`, the operator
+  #     exhausted retries, the CR sat Ready=False/HasErrors=True, and `platform-config` (wait: true,
+  #     so it health-checks this CR) stalled every Kustomization downstream of it. Ours is kept
+  #     because the L0 servicemonitor-ports-resolve and L2 keycloak-monitored conformance tests and
+  #     the dashboard's up{namespace="keycloak"} are written against it; the operator's would scrape
+  #     the same thing (management port 9000, /metrics, 30s). Do NOT flip this to true without
+  #     deleting servicemonitor.yaml in the same change — two owners of one object is a fight
+  #     (cf. the default-deny NetworkPolicy drift loop).
+  serviceMonitor:
+    enabled: false
   # --- Hardening + observability options (docs/15). Brute-force detection is a REALM setting
   #     (bruteForceProtected in the realm import); these enable health + metrics endpoints. ---
   additionalOptions:

platform/keycloak/kustomization.yaml

@@ -20,18 +20,32 @@ kind: Kustomization
 namespace: keycloak
 resources:
   - namespace.yaml
-  # --- Keycloak Operator v26.0.6 (pinned upstream release manifests) ---
+  # --- Keycloak Operator v26.8.2 (pinned upstream release manifests) ---
   # The operator, its CRDs and the SERVER IMAGE move in lockstep: the Keycloak CR has no
   # spec.image, so the operator's RELATED_IMAGE_KEYCLOAK (quay.io/keycloak/keycloak:<same tag>)
-  # is what runs. These three URLs are therefore THE Keycloak version. Each carries a Renovate
-  # marker (custom.regex manager, renovate.json5) under ONE depName, so all three bump in ONE
+  # is what runs. These URLs are therefore THE Keycloak version. Each carries a Renovate
+  # marker (custom.regex manager, renovate.json5) under ONE depName, so all of them bump in ONE
   # branch, never auto-merged (packageRule "keycloak-operator"). Before merging a bump, re-check
   # passkey-reconciler.yaml's 26.0.6 Admin API assumptions — see README.md "Upgrading Keycloak".
+  #
+  # THE URL LIST MUST MATCH UPSTREAM'S kubernetes/kustomization.yml AT THE NEW TAG — Renovate only
+  # rewrites the version in the URLs that are here; it cannot add a CRD the new release introduced.
+  # 26.0.6 shipped 2 CRDs; 26.8.2 ships 4 (+ keycloakoidcclients, keycloaksamlclients, both
+  # v2alpha1). PR #121 bumped only the existing three URLs, and the 26.8.2 operator — which starts an
+  # informer for EVERY kind it controls, used or not — CrashLooped on
+  # `Couldn't start informer for keycloaksamlclients.k8s.keycloak.org/v2alpha1 ... Not Found`,
+  # stalling Flux `platform` and everything downstream (2026-11-08). On every bump, diff
+  #   https://github.com/keycloak/keycloak-k8s-resources/tree/<tag>/kubernetes
+  # against this list before merging.
   # renovate: datasource=github-tags depName=keycloak/keycloak-k8s-resources
   - https://raw.githubusercontent.com/keycloak/keycloak-k8s-resources/26.8.2/kubernetes/keycloaks.k8s.keycloak.org-v1.yml
   # renovate: datasource=github-tags depName=keycloak/keycloak-k8s-resources
   - https://raw.githubusercontent.com/keycloak/keycloak-k8s-resources/26.8.2/kubernetes/keycloakrealmimports.k8s.keycloak.org-v1.yml
   # renovate: datasource=github-tags depName=keycloak/keycloak-k8s-resources
+  - https://raw.githubusercontent.com/keycloak/keycloak-k8s-resources/26.8.2/kubernetes/keycloakoidcclients.k8s.keycloak.org-v1.yml
+  # renovate: datasource=github-tags depName=keycloak/keycloak-k8s-resources
+  - https://raw.githubusercontent.com/keycloak/keycloak-k8s-resources/26.8.2/kubernetes/keycloaksamlclients.k8s.keycloak.org-v1.yml
+  # renovate: datasource=github-tags depName=keycloak/keycloak-k8s-resources
   - https://raw.githubusercontent.com/keycloak/keycloak-k8s-resources/26.8.2/kubernetes/kubernetes.yml
   # --- Admin (break-glass) credential — SOPS-encrypted, referenced by name (ADR-0007, R-IDP-04) ---
   - keycloak-admin-credentials.sops.yaml
@@ -51,3 +65,23 @@ resources:
   - keycloak-db-backup-credentials-prod.sops.yaml
   # --- Grafana dashboard for Keycloak health (plain ConfigMap; R-OBS-03) ---
   - grafana-dashboard.yaml
+# --- Operator memory: upstream ships requests=limits=450Mi, which this cluster outgrew ON 26.0.6 ---
+# Measured on prod 2026-11-08: the 26.0.6 operator pod had 154 restarts in 64d, lastState
+# `OOMKilled` (exit 137, 2026-11-07T23:09:54Z), and sat at 421Mi of its 450Mi (94%) in `kubectl top`.
+# 26.8.2 keeps the same 450Mi default but runs FOUR controllers/informers instead of two (adds
+# keycloakoidcclient + keycloaksamlclient) on a newer Quarkus (3.15.1 -> 3.40.1.1), so it would
+# plausibly start above a ceiling 26.0.6 already crossed. Limit 768Mi = ~1.8x the observed 421Mi
+# working set; request 512Mi = the observed working set plus headroom, so the scheduler reserves what
+# it actually uses. Revisit with `kubectl top` once 26.8.2 has run for a week. Patched here (not in
+# the remote kubernetes.yml) so a Renovate bump keeps it.
+patches:
+  - target:
+      kind: Deployment
+      name: keycloak-operator
+    patch: |-
+      - op: replace
+        path: /spec/template/spec/containers/0/resources/limits/memory
+        value: 768Mi
+      - op: replace
+        path: /spec/template/spec/containers/0/resources/requests/memory
+        value: 512Mi

platform/keycloak/servicemonitor.yaml

@@ -8,6 +8,9 @@
 # /metrics) once metrics-enabled/health-enabled are set (see keycloak-instance.yaml additionalOptions).
 # We select the operator-created keycloak-service (which selects the Keycloak pods) and scrape the pods'
 # management port by number via targetPort.
+# SOLE OWNER: the operator's own ServiceMonitor (same name `keycloak`) is switched OFF in
+#   keycloak-instance.yaml (spec.serviceMonitor.enabled: false) — 26.x defaults it ON and its apply
+#   409-looped against this object on 2026-11-08. Keep exactly one of the two.
 # TODO(WS-SEC, bring-up): confirm the management port number/name the operator exposes (9000 default)
 #   and adjust targetPort if the pinned operator changes it. The KeycloakDown / KeycloakDatabaseDown
 #   alerts (platform/monitoring/alerts.yaml) key on kube-state-metrics and fire regardless of this SM.

renovate.json5

@@ -37,6 +37,8 @@
 //     renovate-config-validator /tmp/renovate.json5
 // (Not `--strict`: that also fails on a pending migration of the pre-existing top-level
 // `"docker": {"enabled": true}` block at the bottom, which is a warning, not an error.)
+// RESOLVED 2026-11-08: that block is now hand-migrated to the first packageRule (`matchCategories:
+// ["docker"]`), the exact shape Renovate's own migration produced, so no migration is pending.
 //
 // `regex` vs `custom.regex` in enabledManagers, RESOLVED FROM SOURCE (Renovate 39.264.0 and
 // later): both work. lib/config/migrations/custom/enabled-managers-migration.ts rewrites
@@ -142,9 +144,7 @@
       "description": "This repo's own CI-published images, pinned by digest, following the tag named in a `# renovate-digest:` marker on the previous line.",
       "managerFilePatterns": [
         "/(^|/)versions\\.env$/",
-        "/(^|/)platform/pm-agent/.+\\.ya?ml$/",
-        // ADDED 2026-11-08: the merge gate's job `container:` is the toolbox, by digest.
-        "/^\\.gitea/workflows/gate\\.ya?ml$/"
+        "/(^|/)platform/pm-agent/.+\\.ya?ml$/"
       ],
       "matchStrings": [
         "#\\s*renovate-digest:\\s*image=(?<depName>\\S+)\\s+tag=(?<currentValue>\\S+)\\s*\\n[^\\n]*?(?<currentDigest>sha256:[a-f0-9]{64})"
@@ -198,6 +198,22 @@
     }
   ],
   "packageRules": [
+    // The `docker` manager (Dockerfiles, docker-compose) and the `kubernetes` manager above were
+    // BOTH previously `enabled: false`, solely so Renovate would not fight Flux image-automation
+    // over a running tag. That controller was never enabled and never will be here (see _comment),
+    // so the only thing those two flags were achieving was leaving every plain `image:` tag in the
+    // repo unmanaged. `docker` is left out of enabledManagers because this repo contains no
+    // Dockerfile that ships to the cluster; `kubernetes` is now ON and is the one that matters.
+    // MOVED HERE 2026-11-08 from a top-level `"docker": {"enabled": true}` key, which Renovate
+    // deprecated (the top-level language objects became `matchCategories` rules). Hand-migrated to
+    // the exact output of Renovate's own config migration (branch renovate/migrate-config, PR #139:
+    // a json5 semantic diff of that file against its parent shows THIS rule, inserted at
+    // packageRules[0], as the ONLY change). #139 itself was closed unmerged because its rewrite
+    // dropped every comment in this file. With nothing left to migrate, Renovate stops reopening it.
+    {
+      "matchCategories": ["docker"],
+      "enabled": true
+    },
     {
       "description": "Auto-merge the allowed low-risk classes on green CI \u2014 no human authoring (R-UPD-02). The Gitea merge gate (make -C ci gate) is the required check.",
       "matchUpdateTypes": [
@@ -254,6 +270,11 @@
         // Keycloak's (the IdP) included, now that imageName is tracked.
         "gitea/gitea",
         "gitea/act_runner",
+        // ADDED 2026-11-08. act_runner was RENAMED upstream to gitea/runner after 0.6.1
+        // (https://gitea.com/gitea/runner/releases). Renovate does not follow a rename — it will
+        // never propose gitea/act_runner -> gitea/runner — so that migration is a manual PR. Listed
+        // now so the new name is blast-radius from its first reference, not after an auto-merge.
+        "gitea/runner",
         "ghcr.io/cloudnative-pg/postgresql"
       ],
       "automerge": false,
@@ -266,7 +287,7 @@
     // and the server image are released in lockstep from keycloak/keycloak-k8s-resources, and the
     // Keycloak CR carries no spec.image, so the operator's RELATED_IMAGE_KEYCLOAK picks the server
     // (measured on prod 2026-10-30: operator 26.0.6 -> keycloak-0/1 run quay.io/keycloak/keycloak:
-    // 26.0.6). The three release URLs in platform/keycloak/kustomization.yaml carry `# renovate:`
+    // 26.0.6). The release URLs in platform/keycloak/kustomization.yaml carry `# renovate:`
     // markers under this ONE depName, so they move together in one branch (groupName makes that
     // explicit). NEVER AUTO-MERGED, not even a patch: Keycloak is the IdP that gates SSO for every
     // app AND kubectl OIDC, and platform/keycloak/passkey-reconciler.yaml encodes Keycloak 26.0.6
@@ -292,8 +313,8 @@
       "enabled": false
     },
     {
-      "description": "ADDED 2026-10-29. This repo's own images are followed ONLY through the `# renovate-digest:` markers above. The `kubernetes` manager also sees platform/pm-agent/deployment.yaml and infra/agent/worker-job-template.yaml, where the image has a digest and no tag; left on, it would look those up as `latest` (a tag CI never pushes) and, for the template, re-open the self-referential loop the custom manager deliberately avoids. `github-actions` ADDED 2026-11-08 for the same reason: it extracts the gate job's digest-only `container: image:` in .gitea/workflows/gate.yml, which the custom manager already follows through its marker.",
-      "matchManagers": ["kubernetes", "github-actions"],
+      "description": "ADDED 2026-10-29. This repo's own images are followed ONLY through the `# renovate-digest:` markers above. The `kubernetes` manager also sees platform/pm-agent/deployment.yaml and infra/agent/worker-job-template.yaml, where the image has a digest and no tag; left on, it would look those up as `latest` (a tag CI never pushes) and, for the template, re-open the self-referential loop the custom manager deliberately avoids.",
+      "matchManagers": ["kubernetes"],
       "matchPackageNames": [
         "gitea.home.keithjackson.dev/home-network/toolbox",
         "gitea.home.keithjackson.dev/home-network/agent-runner",
@@ -370,6 +391,45 @@
       "automerge": false,
       "addLabels": ["needs-review", "range-widen"]
     },
+    // ADDED 2026-11-08 — KEEP THE LOWER BOUND WHEN A MINOR-LOCKED RANGE MOVES. MEASURED PROBLEM:
+    // PRs #131 (longhorn), #130 (headlamp) and #115 (kube-prometheus-stack) turned
+    // `">=1.12.0 <1.13.0"` into `"<1.14.0"` — an UNBOUNDED-below range that also admits every
+    // older chart (and #130 merged: platform/headlamp/helmrelease.yaml carried `<0.47.0`). WHY,
+    // from the 44.167.0 source this file is validated against: no rangeStrategy is set, so it is
+    // `auto`; the flux manager has no getRangeStrategy and no updateLockedDependency, so
+    // lib/modules/manager/index.ts getRangeStrategy resolves `auto` -> `replace`. The helm
+    // datasource's defaultVersioning is `helm`, which is the npm versioning api verbatim
+    // (lib/modules/versioning/helm/index.ts: `api = { ...npm }`), and npm getNewValue under
+    // `replace` rewrites `>=A <B` to just `<C`. Calling that getNewValue in the 44.167.0 image for
+    // currentValue `>=1.12.0 <1.13.0`, newVersion 1.13.0:
+    //   replace -> `<1.14.0`   widen -> `>=1.12.0 <1.14.0`   bump -> `>=1.13.0 <1.14.0`
+    // Only `bump` keeps a one-minor window. (widen keeps the bound but grows the window by a minor
+    // on every PR — the opposite of minor-locking.) Under bump the new lower bound is the release
+    // proposed (e.g. 1.13.2 -> `>=1.13.2 <1.14.0`); Flux still picks the newest that satisfies it.
+    // Scoped to the bounded `>=A <B` shape only: on a ceiling-only range like `<0.47.0` bump
+    // returns the value unchanged, so Renovate would silently propose NOTHING for it, ever.
+    {
+      "description": "ADDED 2026-11-08. HelmRelease `version: \">=A <B\"` ranges move as a whole window (rangeStrategy bump), so a range-widen PR yields `>=1.13.0 <1.14.0`, not `<1.14.0`. See the comment above for the measured cause.",
+      "matchManagers": ["flux"],
+      "matchDatasources": ["helm"],
+      "matchCurrentValue": "/^>=\\S+ <\\S+$/",
+      "rangeStrategy": "bump"
+    },
+    // ...AND DO NOT LET bump ADD NOISE. Under bump Renovate also raises the lower bound for a
+    // release ALREADY INSIDE the range (lib/workers/repository/process/lookup/generate.ts sets
+    // isBump; e.g. 1.12.5 against `>=1.12.0 <1.13.0` -> `>=1.12.5 <1.13.0`), which `replace` never
+    // proposed. Flux already installs that release with no PR, and the range-widen rule above
+    // would hold every one for review. util/package-rules/update-types.ts matches isBump as
+    // updateType `bump`, so exactly those updates are switched off here; out-of-range moves are
+    // ordinary minor/major updates and are unaffected.
+    {
+      "description": "ADDED 2026-11-08. No PR for a chart release the HelmRelease range already admits — Flux adopts it on its own.",
+      "matchManagers": ["flux"],
+      "matchDatasources": ["helm"],
+      "matchCurrentValue": "/^>=\\S+ <\\S+$/",
+      "matchUpdateTypes": ["bump"],
+      "enabled": false
+    },
     {
       "description": "ADDED 2026-10-30. velero-plugin-for-aws is pinned to a RELEASE CANDIDATE (v1.14.3-rc.2) and Renovate proposed NOTHING for it, although v1.14.3 and v1.14.4 are stable on Docker Hub. Docker versioning treats everything after the first `-` as a compatibility SUFFIX, so only other `*-rc.2` tags qualify and the RC is a fossil forever. Semver versioning reads it as a prerelease, and a prerelease upgrades to the stable release.",
       "matchPackageNames": ["velero/velero-plugin-for-aws"],
@@ -441,14 +501,5 @@
     "conformance/tests/**",
     "platform/image-automation/per-service/**",
     "platform/kyverno/tests/**"
-  ],
-  // The `docker` manager (Dockerfiles, docker-compose) and the `kubernetes` manager above were
-  // BOTH previously `enabled: false`, solely so Renovate would not fight Flux image-automation
-  // over a running tag. That controller was never enabled and never will be here (see _comment),
-  // so the only thing those two flags were achieving was leaving every plain `image:` tag in the
-  // repo unmanaged. `docker` is left out of enabledManagers because this repo contains no
-  // Dockerfile that ships to the cluster; `kubernetes` is now ON and is the one that matters.
-  "docker": {
-    "enabled": true
-  }
+  ]
 }