infra/gitea/README.md

@@ -0,0 +1,43 @@
+# infra/gitea — platform settings that are NOT GitOps-managed
+
+Gitea's own repo settings (branch protection, required status checks, approvals) live
+in Gitea's database, not in a manifest Flux reconciles. They are therefore **drift-prone
+and invisible to the gate** — exactly how the state below went unnoticed.
+
+## The gap this closes
+
+Verified against the live API on 2026-09-29, against a `DECISIONS-LOG.md` entry
+(2026-08-31) asserting the opposite:
+
+| Claimed | Measured |
+|---|---|
+| `main` is a protected branch, gate is a required status check | `branch_protections` → `[]`; `protected:false`, `enable_status_check:false`, `required_approvals:0`, `user_can_push:true` |
+| Runner `incluster-dind` online | **zero** runners registered at repo, org and site level |
+
+So `main` accepted direct pushes, and the gate could not run at all. `CLAUDE.md` is the
+rule; this directory is how the rule gets enforced by the machine.
+
+## `branch-protection.sh`
+
+Blocks direct pushes to `main`. Run it, then run the push probe it prints — **verify,
+do not trust the API response**, since Gitea may let site admins bypass protection.
+
+    ./infra/gitea/branch-protection.sh
+
+It authenticates with the credential `git` already has stored for this host, and never
+prints the secret.
+
+## Sequence — order matters
+
+1. **Get an Actions runner registered.** It is GitOps-managed
+   (`apps/wave-1/gitea-actions.yaml`, `apps/wave-1/gitea-actions-runner-secret.sops.yaml`),
+   so it is deployed but not registering — suspect a stale registration token in that
+   SOPS secret.
+2. **Watch the gate actually report on a real PR**, and note the context name it produced.
+3. **Only then set `enable_status_check: true`** with that exact context.
+4. Add the human reviewer as a repo collaborator, then raise `required_approvals` to 1.
+
+> **Do not do step 3 before step 1.** A required status check with no runner leaves every
+> PR permanently pending — including the PR that would fix it. The same applies to
+> `gate.yml`'s `conformance` job: it is `if: false` and never runs, yet still publishes a
+> `gate / conformance (pull_request)` context. Never list that one as required.

infra/gitea/branch-protection.sh

@@ -0,0 +1,57 @@
+#!/usr/bin/env bash
+# Enable branch protection on main for home-network-k3s-impl.
+#
+# Sets enable_push:false  -> no direct pushes to main; changes land only by merging a PR.
+#
+# enable_status_check is deliberately FALSE. There is currently NO Gitea Actions runner
+# registered (verified 2026-09-29: zero at repo, org and site level), so requiring the
+# gate context would deadlock EVERY PR permanently -- including the PR that fixes it.
+# Turn it on only after a runner is live and you have seen the gate actually report on
+# a real PR, using the context name CI itself produced.
+#
+# required_approvals is 0 for the same class of reason: jakman85 is a site admin but NOT
+# a repo collaborator, so requiring an approval now could leave nobody able to approve.
+# Add the collaborator first, then raise this to 1.
+set -euo pipefail
+HOST=gitea.home.keithjackson.dev
+OWNER=Home-Network
+REPO=home-network-k3s-impl
+
+creds="$(printf 'protocol=https\nhost=%s\n\n' "$HOST" | git credential fill)"
+U="$(sed -n 's/^username=//p' <<<"$creds")"
+P="$(sed -n 's/^password=//p' <<<"$creds")"
+[ -n "$U" ] && [ -n "$P" ] || { echo "no stored credential for $HOST" >&2; exit 1; }
+echo "authenticating as '${U}' (secret not shown)"
+
+echo "==> creating branch protection on 'main'"
+jq -n '{
+  branch_name: "main",
+  enable_push: false,
+  enable_status_check: false,
+  status_check_contexts: [],
+  required_approvals: 0,
+  block_on_rejected_reviews: true,
+  block_on_outdated_branch: false,
+  dismiss_stale_approvals: true
+}' | curl -sS --config <(printf 'user = "%s:%s"\n' "$U" "$P") \
+  -X POST -H 'Content-Type: application/json' --data @- \
+  "https://${HOST}/api/v1/repos/${OWNER}/${REPO}/branch_protections" \
+| jq -r 'if .branch_name then "created" else "API said: \(.message // tostring)" end'
+
+echo "==> verifying (this is the part that matters)"
+curl -sS --config <(printf 'user = "%s:%s"\n' "$U" "$P") \
+  "https://${HOST}/api/v1/repos/${OWNER}/${REPO}/branches/main" \
+| jq -r '{protected, user_can_push, required_approvals, enable_status_check, status_check_contexts}'
+
+cat <<'NOTE'
+
+Now prove it actually blocks you -- do not take the API's word for it. From a clean
+checkout on main, with nothing to lose:
+
+    git commit --allow-empty -m 'protection probe'
+    git push origin main          # EXPECT: rejected by the remote
+    git reset --hard HEAD~1       # tidy up either way
+
+If that push SUCCEEDS, Gitea is letting site admins bypass protection and this is not
+yet doing what you want.
+NOTE