jakman85andClaude Opus 5
422e1dc7e8
OPERATOR DECISION 2026-09-06: "use the VIP as intended — a virtual address to reach
the cluster and provide fault tolerant HA. Without a change it will not work in HA."
THE DEFECT. Cilium's kube-proxy replacement dialled a SINGLE NODE. Re-confirmed live
before changing anything: all three prod cilium-agent pods carried
KUBERNETES_SERVICE_HOST=192.168.2.10 — k3s-prod-1's own address — while the kube-vip
VIP 192.168.2.9 was Running on all three nodes with a held lease. Lose prod-1 and the
CNI's control-plane path is dead on an "HA" cluster. clusters/prod's own comment said
the value must be the VIP and NOT .10, then called it "Not yet decided" — I treated
that stale comment as an open question when the evidence already settled it.
SPLIT, NOT REPOINT, because k3s_api_host had two consumers with opposite needs:
k3s_api_host unchanged — the FOUNDER's IP: the cold-bootstrap join
target and a tls-san. infra/tofu/outputs.tf GENERATES this
name, so renaming would ripple into tofu and the runbooks.
k3s_apiserver_endpoint NEW = {{ kube_vip_address }} — the HA address; what Cilium
consumes. Derived, not restated, so an environment overrides
ONE line and the VIP, the SAN and the CNI endpoint move
together. Prod needed no new override.
THE SECOND HAZARD, WHICH MY BRIEF DID NOT NAME and the agent found: pointing Cilium at
the VIP breaks a COLD bootstrap for the same reason the join would — site.yml ran
node-baseline -> k3s -> cilium, so Cilium would install against an address nothing
announced yet. That is the 2026-09-01 deadlock shape. Fixed by SEQUENCE, not value:
site.yml now imports kube-vip.yml BETWEEN k3s and cilium. It cannot go earlier
(kube-vip is a k3s auto-deploy manifest, so it needs a cluster) and it works there
because the DaemonSet is hostNetwork with KUBERNETES_SERVICE_HOST=127.0.0.1 — needing
neither CNI nor kube-proxy. roles/kube_vip gained a read-only `wait_for` on the VIP so
a cold run stops THERE with a named cause instead of surfacing as unreachable agents.
Also fixed a pre-existing bug that only mattered once this play joined site.yml: the
role's read-only interface probe ran without `check_mode: false`, so under --check it
was skipped and the assert fired with a misleading "set kube_vip_interface explicitly".
VERIFIED BY ME, not just reported:
renders dev K3S_API_HOST=192.168.1.49 prod=192.168.2.9 (each environment's VIP)
cilium template consumes k3s_apiserver_endpoint, not k3s_api_host
cold join still `--server https://{{ k3s_api_host }}:6443` — the founder
order site.yml: node-baseline -> k3s -> kube-vip -> cilium -> verify -> flux
gate full CI gate PASS
Agent-side, additionally: in-memory render of cilium-values.yaml.j2 per host showing
k8sServiceHost=the VIP with the join still on the founder; k3s_tls_sans renders
['.10','.9','127.0.0.1','.11','.12'] so NO cert reissue and NO k3s restart is involved
— .9 already answers under full CA verification; and --check --diff of kube-vip.yml
against prod reported 6 ok / 0 changed, i.e. the role edits change nothing about the
kube-vip prod already runs.
ha-control-plane-as-code 92 -> 112 assertions, turning two escalations into machine
checks: the Cilium template must use the endpoint var; the endpoint must derive from
kube_vip_address and k3s_api_host must not; per environment K3S_API_HOST must equal
that environment's VIP and be none of its node IPs (the [parity] contract, now
machine-checked rather than a comment); site.yml must order k3s -> kube-vip -> cilium.
Every new assertion mutation-tested and bites. One honest negative recorded: reverting
only the BASE default is not caught, because both overlays patch the key — the check
reads effective per-environment values, so the base default is unguarded.
APPLY ORDER, and this is the operator's step — nothing was applied:
PROD FIRST, and it is the low-risk direction (prod is the broken one). Push and let
Flux reconcile platform/cilium: the value change rolls the cilium-agent DaemonSet
ONE NODE AT A TIME (maxUnavailable: 1 — the knob that bounded the 2026-09-01
incident), it will not proceed past an unready pod, existing datapath survives an
agent restart, and .9 is already live before the change lands.
DEV SEPARATELY, operator present. Same mechanics but live dev agents dial
192.168.1.50, and dev is mid-DNS-migration on dev-live. Do not fold it into that.
ANSIBLE: nothing to run for either live cluster; the Ansible half matters only for a
cold build. Remove the now-redundant standalone kube-vip.yml step from any runbook.
NEW NAMED GAP, unwritten: the L2 test cannot assert the running agents' live
KUBERNETES_SERVICE_HOST, which is the drift the L0 check cannot see. Recorded in that
test's gap list.
Refs R-PLAT-01, R-NET-01, R-ENV-02.
Co-Authored-By: Claude Opus 5 <[email protected]>
home-network-k3s-impl
Implementation of the home k3s + Longhorn platform. This repo holds the reconciled artifacts
(Flux config, Kustomize overlays, KubeVirt/Helm manifests, ServiceDefinitions, Kyverno policies,
Chainsaw conformance tests, CI). It is driven by — and subordinate to — the read-only
specification at ../home-network-k3s.
Rules (from the spec — non-negotiable)
- The spec is read-only. Never modify anything under
../home-network-k3s. Implement against it; escalate spec problems, don't edit them (specAGENTS.md§11, R-TEST-06). - Done = a green, reproducible, requirement-tagged conformance test — never "merged," never a
manual demo (spec
docs/14,agents/definition-of-done.md). - No work on
main. Every change is a feature branch merged intomain(specCONTRIBUTING.md). - No plaintext secrets — SOPS-encrypted only (spec
docs/07). - Phase discipline — only build what the active roadmap phase authorizes (spec
roadmap/phases.md).
Layout
infra/ node provisioning: OpenTofu (Proxmox VE) + cloud-init + Ansible, and the
pinned dev container that carries the whole toolchain
bootstrap/ one-time cluster bootstrap: Flux install, SOPS/age key, host Gitea
platform/ platform CONTROLLERS (Flux HelmReleases / operator bases): kyverno, cilium,
longhorn, external-snapshotter, cert-manager, externaldns, gateway, coredns,
vpn-egress, monitoring, cnpg, keycloak, oauth2-proxy, kubevirt
platform-config/ platform CONFIGS — the custom resources of the CRDs installed above
(ClusterIssuers, Gateway, Kyverno policies, KubeVirt/CDI CRs, Keycloak CRs).
Split out because CRs and the CRDs they use cannot apply in one pass.
apps/ application tier, reconciled as dependency-ordered WAVES:
wave-0/ wave-1/ wave-2/ rendered container apps (see DESIGN-waves.md)
vms/ KubeVirt VirtualMachines (non-gating tier)
catalog/ ServiceDefinition entries (the onboarding surface) + render.py
schemas/ ServiceDefinition JSON Schema + renderer contract
clusters/ Flux entrypoints + dev/ and prod/ overlays
conformance/ Chainsaw behavior/conformance suite + harness + coverage report
ci/ the gate as scripts (lint · schema · Kyverno L0 · L1 render · decision)
.gitea/ Gitea Actions CI running that gate on an in-cluster runner
Status
Roadmap phases 0–6 are delivered and deployed on the dev cluster; Phase 7 (prod) is not
open — clusters/prod is a design-only overlay.
| Phase | Delivered |
|---|---|
| 0 Foundations | ServiceDefinition schema + renderer, Kyverno L0 gate, conformance harness, CI |
| 1 Cluster bring-up | 3-node k3s HA on Proxmox VE (192.168.1.50/.51/.52), Cilium, Flux, SOPS |
| 2 Platform core | Cilium · Longhorn · cert-manager (LE-prod wildcard) · ExternalDNS · Gateway API · split-horizon CoreDNS |
| 3 Egress / VPN | ADR-0015 node-level OpenVPN split-tunnel + Cilium egress-gateway steering + host kill-switch |
| 4 Observability | kube-prometheus-stack · Loki · Alloy · Alertmanager. Velero still blocked on OQ-BKP; image-automation authored but disabled |
| 5 IaaS | KubeVirt + CDI on real nested KVM; live-migratable RWX VM storage. The UniFi VM runs, but UniFi OS Server is not yet installed in the guest |
| 6 Identity + CI | Keycloak (Operator + CNPG) · oauth2-proxy forward-auth · Grafana OIDC · kubectl OIDC SSO with group→RBAC · in-cluster Gitea Actions merge gate |
Conformance: 36 / 51 requirements covered (70.6%), 15 gaps, 1 safety-critical gap
(R-STATE-02, Longhorn node-loss). Regenerate with ./conformance/run.sh --coverage-only;
the full report is conformance/_artifacts/coverage/coverage.md.
The running narrative — decisions, root causes, incidents, follow-ups — is
DECISIONS-LOG.md. It, not this table, is the authoritative record.
Working on this repo
Everything the gate needs is baked into the pinned dev container — do not install the toolchain on the host:
infra/devcontainer/dev.sh build # once
infra/devcontainer/dev.sh run make -C ci gate # the same gate CI runs
infra/devcontainer/dev.sh # interactive shell (sops, flux, kubectl, tofu, ansible)
The container mounts the repo at /work, your age keyring, and the sibling spec repo read-only
so the spec-immutability check can actually run. See
infra/devcontainer/README.md.
A green run prints MERGE GATE: PASS. The L2/L3 conformance layers stay SKIPPED unless
CLUSTER_AVAILABLE=true — the static gate never pretends to have run them.