jakman85
3a88abb958
Operator asked whether node 2's missing memory could be reserved for integrated graphics. TESTED, and no: /proc/iomem shows 'c8800000-cc7fffff : Graphics Stolen Memory' = EXACTLY 64 MiB, matching the BIOS Video Memory Size=64 MB setting, and it sits BELOW the 4 GiB line. The UHD 630 (i915 bound) takes precisely what it is configured to take. It cannot account for 13.3 GiB and is not even in the affected address range. CORRECTION to my own analysis, prompted by checking that hypothesis properly: I cited the 'last_pfn revised DOWN from 0x42f800 to 0xc3c10' line as evidence of a memory cap. That was a MISREADING. x86 boot prints last_pfn twice — first max_pfn from the full e820, then max_low_pfn, the end of RAM below 4 GiB. The e820 low usable region ends at 0xc3c0ffff, so the next PFN is exactly 0xc3c10, which is the second value observed. It matches to the byte and is normal on any machine with more than 4 GiB. I presented a routine boot message as a smoking gun, and the 'memory remapping above 4 GB not being applied' signature claim rested partly on it. The real anomaly is narrower than first stated: the Normal zone is 'present' but 'managed 0', 13.3 GiB is reserved, and nothing in the boot log explains by what. Ruled out so far: DIMM health, firmware inventory, memory-remap settings (none exist on this platform), MTRR trim, iomem registration, and now integrated graphics. Leading remaining hypothesis is stale memory-training data cached by Fast Boot — testable with one F10 toggle. Serves: R-ENV-03. Task: T-7.1.
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.