jakman85andClaude Opus 4.8
0d55c793f3
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
58 lines
4.1 KiB
Markdown
58 lines
4.1 KiB
Markdown
# platform/vpn-egress — shared VPN egress gateway (Phase 3, ADR-0013)
|
|
|
|
Single shared **Gluetun** gateway: **PIA over WireGuard**, built-in kill-switch, native port
|
|
forwarding. `vpn`-class services (sonarr, radarr, jackett, qbittorrent) egress **only** through this
|
|
tunnel; `internet`-class services go out the normal WAN. Serves **R-NET-05/06/07**.
|
|
|
|
> **STATUS: authored, NOT deployed.** Not wired into `platform/kustomization.yaml` yet. Deploy needs
|
|
> (a) the `pia-credentials` SOPS secret, and (b) validation of the egress-steering mechanism below,
|
|
> which cannot be tested without a live PIA tunnel.
|
|
|
|
## Pieces
|
|
- `gluetun-gateway.yaml` — the Gluetun Deployment (`replicas: 1`, `Recreate`) + the `gluetun-control`
|
|
Service (control API :8000 for forwarded-port lookup + tunnel-state health). Kill-switch = `FIREWALL=on`.
|
|
- `pia-credentials` (SOPS) — PIA username/password only; Gluetun derives the WireGuard config at runtime.
|
|
|
|
## Operator hand-off (when deploying Phase 3)
|
|
1. Provision `pia-credentials` (see `bootstrap/sops/secret-templates/pia-credentials.yaml.example`,
|
|
namespace `vpn-egress`, keys `username`/`password`) → `sops -e -i` → uncomment it in `kustomization.yaml`.
|
|
2. cluster-vars (already defined in `clusters/base/cluster-vars.yaml`; a ConfigMap — values are plain
|
|
strings under `data:`, injected into the `${...}` tokens by Flux `postBuild.substituteFrom`). Confirm
|
|
or override:
|
|
- `PIA_REGION` — a **port-forwarding-capable** PIA region (default `Sweden`; e.g. `Netherlands`,
|
|
`CA Toronto`, `Switzerland`; NOT a US region — those lack PF). Gluetun `SERVER_REGIONS`.
|
|
- `CLUSTER_POD_CIDR` — the **Cilium cluster-pool** pod CIDR (default `10.0.0.0/8`; pods get `10.x`,
|
|
confirmed live — NOT the k3s `10.42.0.0/16`). Gluetun `FIREWALL_OUTBOUND_SUBNETS`.
|
|
Per-env overrides go in `clusters/<env>/kustomization.yaml` as a cluster-vars JSON patch
|
|
(`- op: replace, path: /data/PIA_REGION, value: "…"`). With the self-managing root, a `git push`
|
|
auto-applies (no manual `kubectl apply -k`).
|
|
3. Enable `- vpn-egress` in `platform/kustomization.yaml` (Phase 3).
|
|
|
|
## Egress steering — the DESIGN DECISION (needs live validation)
|
|
The hard part: routing `vpn`-class pods through this ONE shared tunnel. Cilium Egress Gateway
|
|
(`CiliumEgressGatewayPolicy`) SNATs matched pods out of a **gateway node's interface** — it does not
|
|
natively route through a *pod's* tunnel. Options considered:
|
|
|
|
1. **Cilium Egress Gateway → the Gluetun node's tunnel interface (recommended).** Pin Gluetun to a
|
|
node; a `CiliumEgressGatewayPolicy` selects pods labeled `homelab.keithjackson.dev/egress-class=vpn`
|
|
and egresses them via that node's WireGuard interface (`wg0`). If the tunnel drops, `wg0` is gone →
|
|
traffic has no egress path → **fail-closed** (the kill-switch behavior R-NET-06 needs). This is the
|
|
most Cilium-native fit but requires Gluetun's tunnel interface to be visible to the node datapath
|
|
(hostNetwork Gluetun, or a shared netns) — the detail to VALIDATE.
|
|
2. **Gateway-pod routing:** client pods default-route to the Gluetun pod IP (init-container +
|
|
NET_ADMIN, or a Multus secondary interface); Gluetun forwards+NATs via the tunnel. Works without
|
|
Cilium egress gateway but is more moving parts and pod-IP-fragile.
|
|
3. **Per-pod Gluetun sidecar** — explicitly REJECTED by ADR-0013 (single shared gateway preferred).
|
|
|
|
**Plan:** validate option 1 against a live PIA tunnel (confirm `wg0` on the Gluetun node + a
|
|
`CiliumEgressGatewayPolicy` steering `egress-class=vpn` pods, then run the `egress-class` (R-NET-05/07)
|
|
and `vpn-killswitch` (R-NET-06) conformance tests). Fall back to option 2 if the interface isn't
|
|
addressable. The `CiliumEgressGatewayPolicy` is intentionally NOT committed until validated, to avoid
|
|
shipping an untested datapath policy.
|
|
|
|
## Port forwarding (qBittorrent) — follow-up
|
|
PIA assigns a forwarded port that can change on reconnect. A small **port-sync helper**
|
|
(`qbittorrent-natmap`) reads the current port from the `gluetun-control` API (:8000
|
|
`/v1/openvpn/portforwarded`) and writes it into qBittorrent, keeping it hands-off (R-UPD). Authored
|
|
alongside the qBittorrent app (Phase 6 apps / or here when qBittorrent lands).
|