jakman85andClaude Opus 5
60e3f09c67
`[vpn_egress_gateway_prod]` is a SEPARATE inventory group with its own vaulted credentials, not a second member of `[vpn_egress_gateway]`. That group is the default target of playbooks/vpn.egress.gateway.yml, so adding a prod host to it would mean a flagless `ansible-playbook playbooks/vpn.egress.gateway.yml` silently reconfigures a prod node's kill-switch datapath. Prod is reached only by asking for it, with `--list-hosts` first: -e vpn_egress_gateway_hosts=vpn_egress_gateway_prod --limit k3s-prod-3 Node 3 because node 1's SSD was replaced yesterday (least operational history) and node 2 carries the §0b memattr history. Exactly one node, forever: Cilium OSS picks "the first node in lexical ordering" among nodeSelector matches, so a labelled k3s-prod-1 would silently steal the gateway role — and the public egress IP — from k3s-prod-3, with no event and no alert. vault.yml is a verbatim copy of the dev group's CIPHERTEXT: same PIA account per the operator, and copying the encrypted blob means the plaintext was never decrypted to disk, through a shell, or into a transcript. The two files are now independent — rotating means re-encrypting both, which is the right behaviour for two environments. Also corrects a stale inventory note that claimed k3s-prod-3 has wlp1s0 up on 192.168.2.195. Re-verified before choosing it as the gateway, because a second live uplink in a kill-switch datapath is not a footnote: there is no wl* netdev on the node at all, no phy80211 device, the /etc/network/interfaces wlp1s0 stanza is commented out, 192.168.2.195 is assigned nowhere, and the only IPv4 addresses are lo and eno1 192.168.2.12. Nothing needed bringing down. Co-Authored-By: Claude Opus 5 <[email protected]>
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.