jakman85andClaude Opus 5
765ad032db
`platform-config` applied the CDI CR *and* cdi-storageprofiles.yaml in ONE pass.
StorageProfile's CRD does not exist until cdi-operator reconciles that CR, and
Flux server-side dry-runs every object before applying any — so the unknown kind
aborted the tier, the CR was never applied, the CRD was never created, and the
tier could NEVER converge. Observed on prod: cdi-operator Available 12h, no CDI
CR, no storageprofiles CRD, every downstream tier blocked.
The profiles now live in their own tier ./platform-config-cdi with
dependsOn: platform-config and wait: true. Because dependsOn is REVISION-gated
and platform-config runs wait: true, the CDI CR must be applied AND healthy —
exactly the event that creates the CRD — before the profiles are applied. Cold
clusters order themselves. `standup.sh crds` is retained as a fallback for
clusters already stuck, and because it is idempotent.
THE GENERALISABLE RULE (recorded in clusters/README.md): a CR whose CRD is
created by a CONTROLLER AT RUNTIME is second-order and needs its own pass.
cdi-operator.yaml registers exactly ONE CRD (cdis.cdi.kubevirt.io); storageprofiles,
datavolumes, datasources and dataimportcrons appear only after it reconciles the
CDI CR. An audit found StorageProfile is the only second-order kind in
platform-config — KubeVirt, CDI, KeycloakRealmImport, CNPG Cluster,
VolumeSnapshotClass, ClusterIssuer, PrometheusRule, ServiceMonitor and the Cilium
L2 CRs all have their CRD in git or in a chart.
Moving the CDI CR up into `platform` was rejected: that would put CDI's health on
the tier the CNI gates and everything waits on — the mistake the oauth2-proxy and
headlamp splits exist to undo.
apps-vms gains dependsOn: platform-config-cdi. LOAD-BEARING, not cosmetic:
apps/vms/unifi/20-datavolume.yaml provisions on storageClassName: longhorn-vm and
its comment claimed platform-config guaranteed the profiles — which this move
would have silently falsified.
THE PRUNE TRANSIENT, MEASURED RATHER THAN ASSUMED. platform-config has
prune: true, so it deletes both profiles once, CDI recreates them with empty spec,
and the new tier re-applies the overrides ~30-60s later. Compared our override
against CDI's unaided inference for the same Longhorn provisioner on dev:
longhorn-vm (we override) spec RWX/Block -> status ReadWriteMany/Block
longhorn-static (no override) spec unset -> status ReadWriteOnce/Block
Both infer cloneStrategy: snapshot. So cloneStrategy is NOT at risk; accessModes
IS — unaided CDI gives RWO. A DataVolume provisioned on longhorn-vm inside the
window would be stamped RWO/Block and be PERMANENTLY non-live-migratable. Flux can
no longer cause it (apps-vms gates on the new tier); a human must not do it by hand.
Corroborating evidence that the recreate happens at all: dev has 5 StorageClasses
and 5 StorageProfiles, three with fluxOwner=NONE, spec unset and status populated
— CDI creating and inferring them with no Flux involvement.
MERGE PRECONDITION: `flux get kustomization platform-config` must be Ready on the
target first. If it is not, the profiles are pruned and sit at CDI defaults until
it recovers — and prod was in that state hours earlier. Fallback is the two-step
the Cilium move used (merge with prune: false, verify the ownership label moved,
restore prune: true).
substituteFrom: cluster-vars is declared even though the manifest has no ${TOKEN},
deliberately: conformance/tests/l0-static/flux-postbuild-substitution only audits
paths whose Kustomization declares it, so omitting it would move the file OUT of
the audited set — a blind spot for a future literal-token ship. Gate confirms it
stayed in (path=./platform-config-cdi files=2 defined=0 hazards=0). No SOPS
decryption stanza: the moved file is two plain CRs, so no overlay change was needed.
VERIFIED INDEPENDENTLY OF THE AGENT: platform-config renders 0 StorageProfile
while keeping the CDI and KubeVirt CRs; platform-config-cdi renders exactly the
two profiles; the graph is byte-identical across dev and prod with apps-vms
carrying both edges and no cycle. Full CI gate PASS.
KNOWN FOLLOW-UP: bootstrap/standup.sh TIER_ORDER does not yet include
platform-config-cdi, so `resume` will not wait on it. Another agent holds that
file; the PM will add it.
Refs R-GITOPS-01, R-ENV-02.
Co-Authored-By: Claude Opus 5 <[email protected]>
infra/ — node provisioning and the toolchain
OpenTofu (Proxmox VE) + cloud-init + Ansible bring up the 3-node k3s/Cilium dev cluster.
Spec: ../home-network-k3s/docs/02-environments-and-provisioning.md.
| Path | What |
|---|---|
tofu/ |
The "Create" stage: 3 cloud-init'd VMs on the Proxmox box (bpg/proxmox provider) |
cloud-init/ |
First-boot baseline shipped as a Proxmox user-data snippet |
ansible/ |
The "Baseline"/"Configure" stages: k3s HA, Cilium, kube-vip, the VPN egress gateway |
devcontainer/ |
The pinned toolchain (tofu, ansible, sops, age, flux, kubectl, helm and the whole CI gate toolchain) |
cluster.sh |
RETIRED — drove the old libvirt VMs; does not work against Proxmox |
PHASE1-STATUS.md |
Current state of the cluster and how to reconnect to it |
PHASE1-SCOPE.md |
Historical Phase-1 scoping doc (libvirt era — superseded) |
Where the cluster actually lives
The dev cluster is not on this workstation. It runs on a Proxmox VE host; the nodes sit on the Proxmox LAN and are reached across a pfSense NAT:
| Nodes | k3s-dev-1/2/3 at 192.168.1.50/.51/.52 — 6 vCPU, 24 GiB, Debian 13, k3s v1.36.4 |
| kube-API | kube-vip VIP 192.168.1.49:6443, reached from the workstation via NAT 192.168.2.50:6443 |
| Node SSH | pfSense NAT 192.168.2.102:2250/2251/2252 → node :22 (Ansible only) |
| Ingress VIP | 192.168.1.53 (Cilium L2, shared Gateway); .53–.60 reserved for LB VIPs |
The earlier libvirt/KVM cluster on 10.73.0.0/24 is retired. Any doc or command referencing
virsh, qemu:///system, or 10.73.0.x for the cluster is historical.