jakman85
863af01062
infra/PROD-PROVISIONING.md §2 recorded the etcd/Longhorn shared-partition risk as "accepted to be MEASURED, not assumed", with an exit condition. The measurement arrived on 2026-09-07 in production, 2 d 7 h after bring-up, as an outage. §2 now carries "THE MEASUREMENT CAME BACK": the journal evidence, the three-node IO PSI table (11.36 / 0.75 / 1.29), and the honest verdict that the section's own premise — "every prod node is SSD or NVMe, where rebuild I/O costs latency rather than collapsing it" — was right about node 2 and wrong about node 1. A 2011 C400 with 61,440 reallocated sectors and no power-loss protection is not the "SSD" that reasoning assumed, and §0 had already named the three-way drive asymmetry as the fault line. The exit condition is OPEN and the second bullet (dedicated device) applies; that remains the operator's. Also records what the three software mitigations in this branch do and do not buy, including the point that no cgroup or scheduler control arbitrates the ext4 journal both tenants share — and the gap that etcd's own fsync histograms, which the exit condition literally asks for, are not collected because kubeEtcd is disabled for k3s. PSI is the signal that exists. DECISIONS-LOG gains the full entry: the four I/O mechanisms found INERT on these nodes (IOSchedulingClass, IOSchedulingPriority, io.latency, bare IOWeight), the finding that concurrentReplicaRebuildPerNodeLimit was already set and already held during the outage, the third instance of config that looked applied and was not (orphanAutoDeletion), and the three things still requiring the operator. infra/ansible/README.md: CORRECTED a stale claim that k3s-prod-2/-3 "stay commented out" of the inventory. They have been live in [k3s_prod_secondary] since 2026-09-03. That sentence is exactly the kind used to reason about blast radius — `-e k3s_hosts=k3s_prod` targets THREE hosts, not one — so it is replaced with the --list-hosts command that settles it. The new etcd-io-priority play is added to the run order, the layer table and the prod command list. Co-Authored-By: Claude Opus 5 <[email protected]> (cherry picked from commit a00a27a2567ea6a805c8c196b75df2c92a7c63a4)
home-network-k3s-impl
Implementation of the home k3s + Longhorn platform. This repo holds the reconciled artifacts
(Flux config, Kustomize overlays, KubeVirt/Helm manifests, ServiceDefinitions, Kyverno policies,
Chainsaw conformance tests, CI). It is driven by — and subordinate to — the read-only
specification at ../home-network-k3s.
Rules (from the spec — non-negotiable)
- The spec is read-only. Never modify anything under
../home-network-k3s. Implement against it; escalate spec problems, don't edit them (specAGENTS.md§11, R-TEST-06). - Done = a green, reproducible, requirement-tagged conformance test — never "merged," never a
manual demo (spec
docs/14,agents/definition-of-done.md). - No work on
main. Every change is a feature branch merged intomain(specCONTRIBUTING.md). - No plaintext secrets — SOPS-encrypted only (spec
docs/07). - Phase discipline — only build what the active roadmap phase authorizes (spec
roadmap/phases.md).
Layout
infra/ node provisioning: OpenTofu (Proxmox VE) + cloud-init + Ansible, and the
pinned dev container that carries the whole toolchain
bootstrap/ one-time cluster bootstrap: Flux install, SOPS/age key, host Gitea
platform/ platform CONTROLLERS (Flux HelmReleases / operator bases): kyverno, cilium,
longhorn, external-snapshotter, cert-manager, externaldns, gateway, coredns,
vpn-egress, monitoring, cnpg, keycloak, oauth2-proxy, kubevirt
platform-config/ platform CONFIGS — the custom resources of the CRDs installed above
(ClusterIssuers, Gateway, Kyverno policies, KubeVirt/CDI CRs, Keycloak CRs).
Split out because CRs and the CRDs they use cannot apply in one pass.
apps/ application tier, reconciled as dependency-ordered WAVES:
wave-0/ wave-1/ wave-2/ rendered container apps (see DESIGN-waves.md)
vms/ KubeVirt VirtualMachines (non-gating tier)
catalog/ ServiceDefinition entries (the onboarding surface) + render.py
schemas/ ServiceDefinition JSON Schema + renderer contract
clusters/ Flux entrypoints + dev/ and prod/ overlays
conformance/ Chainsaw behavior/conformance suite + harness + coverage report
ci/ the gate as scripts (lint · schema · Kyverno L0 · L1 render · decision)
.gitea/ Gitea Actions CI running that gate on an in-cluster runner
Status
Roadmap phases 0–6 are delivered and deployed on the dev cluster; Phase 7 (prod) is not
open — clusters/prod is a design-only overlay.
| Phase | Delivered |
|---|---|
| 0 Foundations | ServiceDefinition schema + renderer, Kyverno L0 gate, conformance harness, CI |
| 1 Cluster bring-up | 3-node k3s HA on Proxmox VE (192.168.1.50/.51/.52), Cilium, Flux, SOPS |
| 2 Platform core | Cilium · Longhorn · cert-manager (LE-prod wildcard) · ExternalDNS · Gateway API · split-horizon CoreDNS |
| 3 Egress / VPN | ADR-0015 node-level OpenVPN split-tunnel + Cilium egress-gateway steering + host kill-switch |
| 4 Observability | kube-prometheus-stack · Loki · Alloy · Alertmanager. Velero still blocked on OQ-BKP; image-automation authored but disabled |
| 5 IaaS | KubeVirt + CDI on real nested KVM; live-migratable RWX VM storage. The UniFi VM runs, but UniFi OS Server is not yet installed in the guest |
| 6 Identity + CI | Keycloak (Operator + CNPG) · oauth2-proxy forward-auth · Grafana OIDC · kubectl OIDC SSO with group→RBAC · in-cluster Gitea Actions merge gate |
Conformance: 36 / 51 requirements covered (70.6%), 15 gaps, 1 safety-critical gap
(R-STATE-02, Longhorn node-loss). Regenerate with ./conformance/run.sh --coverage-only;
the full report is conformance/_artifacts/coverage/coverage.md.
The running narrative — decisions, root causes, incidents, follow-ups — is
DECISIONS-LOG.md. It, not this table, is the authoritative record.
Working on this repo
Everything the gate needs is baked into the pinned dev container — do not install the toolchain on the host:
infra/devcontainer/dev.sh build # once
infra/devcontainer/dev.sh run make -C ci gate # the same gate CI runs
infra/devcontainer/dev.sh # interactive shell (sops, flux, kubectl, tofu, ansible)
The container mounts the repo at /work, your age keyring, and the sibling spec repo read-only
so the spec-immutability check can actually run. See
infra/devcontainer/README.md.
A green run prints MERGE GATE: PASS. The L2/L3 conformance layers stay SKIPPED unless
CLUSTER_AVAILABLE=true — the static gate never pretends to have run them.