docs(prod): fill in node-2 inventory; drop stale investigate bullets

Records node 2's as-found hardware alongside node 1 and removes two bullets that my earlier
edit left duplicated/obsolete (the BIOS comparison is done; clear-CMOS was listed twice).

Makes the hardware ASYMMETRY explicit in the table rather than buried in prose: node 1 is a
~2011 Micron C400 SATA SSD at 69% life with 15 grown bad blocks and 187 erase failures; node 2
is a Samsung PM9A1 NVMe at 96% life, PASSED. Same chassis, same BIOS, same CPU, same partition
layout — very different storage. §2 requires an identical disk layout across all three nodes
because Longhorn replica placement assumes symmetry, so this belongs in the inventory where the
disk decision will be made.

Serves: R-ENV-03. Task: T-7.1.

conformance/.gitignore

@@ -8,3 +8,22 @@ _artifacts/
 
 # Python bytecode from lib/ (status.py imports coverage.py); never committed.
 __pycache__/
+
+# --- THE ONE EXCEPTION: the committed run ledger (runs/) -------------------------------
+# `runs/<UTC>-<short-sha>/{report.junit.xml,run.log}` + `runs/ledger.jsonl` are the
+# machine-readable proof-of-pass record that lib/status.py's docstring asks for. They are
+# SOURCE, not regenerated artifacts: a run's evidence cannot be reconstructed after the
+# fact, so it must survive in git.
+#
+# The negations are needed because the ROOT .gitignore ignores `*.junit.xml` globally
+# (and `coverage/`). A deeper .gitignore overrides a shallower one, and nothing ignores
+# the `conformance/runs/` directory itself, so re-including the files here works (git
+# cannot re-include a file whose PARENT DIRECTORY is excluded — that is why this must not
+# live under _artifacts/).
+#
+# The run LOG is the load-bearing half: Chainsaw's JUnit carries no stdout, and the L2/L3
+# tests self-skip GREEN, so the sentinel token in run.log is the only thing separating
+# "proven" from "skipped". Never commit a report.junit.xml without its run.log.
+!runs/
+!runs/**
+!runs/**/*.junit.xml

conformance/README.md

@@ -22,6 +22,7 @@ behavioral / L3 fault-injection** (this harness).
 ./run.sh --lint                       # structural-validate test defs (no cluster)
 ./run.sh --strict-coverage            # hygiene gate: fail on tag/annotation drift
 ./run.sh --require-all                # phase-exit gate: every requirement must be covered
+./run.sh --record                     # run AND capture the evidence (see "Proof of pass")
 ```
 
 **Gating is scoped, not "all 51 always"** (R-TEST-03). Three distinct checks:
@@ -105,13 +106,89 @@ lib/
   common.sh                  tagging convention + test discovery/selection helpers
   coverage.py                requirement-coverage generator (stdlib only)
   status.py                  requirement-STATUS generator (stdlib only; --selftest)
+  record_run.py              run-ledger writer: PROOF-of-pass (stdlib only; --selftest)
   emit_skipped_junit.py      Phase-0 skipped-JUnit shim (no cluster)
+runs/
+  ledger.jsonl               TRACKED append-only proof-of-pass ledger (one row per
+                             testcase per run) — the only source status.py trusts
+  <UTC>-<short-sha>/         TRACKED per-run evidence: run.log + report.junit.xml
 tests/
   l1-rendering/  l2-behavioral/  l3-fault-injection/  meta/   (see tests/README.md)
 incluster/
   chainsaw-job.yaml  rbac.yaml   in-cluster L2/L3 Job + scoped test SA (ADR-0011)
 ```
 
+## Proof of pass — the run ledger (`runs/`)
+
+`--status` used to report **PROVEN: 0** for all 51 requirements, and said so honestly:
+proof-of-pass was not recoverable from repo state. `_artifacts/` is gitignored and the
+root `.gitignore` kills `*.junit.xml` globally, so no run result ever reached git; the
+only record of a green run was DECISIONS-LOG.md prose. `runs/` is the fix `lib/status.py`
+asked for — **a committed, machine-readable run ledger**.
+
+```bash
+./run.sh --record                     # runs normally, and captures the evidence
+# -> conformance/runs/<UTC>-<short-sha>/run.log            (tee'd, carries the sentinels)
+# -> conformance/runs/<UTC>-<short-sha>/report.junit.xml   (that run's JUnit)
+# -> conformance/runs/ledger.jsonl                         (one appended row per testcase)
+python3 lib/record_run.py --run-dir runs/<id> [--dry-run]  # or record an existing run dir
+python3 lib/record_run.py --selftest                       # deterministic, no cluster
+```
+
+**Recording is explicit, never implicit.** Plain `./run.sh` writes no ledger row: a run
+that silently records itself is how a bad run becomes a permanent false proof. **Commit
+the run dir and the ledger** — an uncommitted ledger proves nothing.
+
+### Why a committed JUnit alone would be WORSE than nothing
+
+The L2/L3 tests are runnable and **self-skipping**: when a precondition is missing (no
+`longhorn` StorageClass, no Velero CRDs, fewer than 3 Ready nodes) they echo a skip token
+and `exit 0`, and their `check:` accepts either outcome —
+
+```yaml
+(contains($stdout, 'DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK')
+ || contains($stdout, 'DR_RESTORE_SKIPPED_OK')): true
+```
+
+So **a self-skip exits 0 and Chainsaw records `passed` exactly as a real run does**, and
+Chainsaw's JUnit carries no stdout — its `<testcase>` elements hold only `<properties>`.
+A committed JUnit on its own would therefore record `DR_RESTORE_SKIPPED_OK` as *proof of
+R-STATE-03*: fake green, and worse than no ledger because it would look authoritative.
+
+**The sentinel token in `run.log` is the only thing that separates proven from skipped.**
+`record_run.py` derives each test's tokens from its own `chainsaw-test.yaml` (every
+`contains($stdout, 'TOKEN')`; `*_SKIP*_OK` is a skip token, the last non-skip token is the
+verdict token), so the table below is never hand-maintained:
+
+| Test | pass token (proof) | skip token (never proof) |
+|---|---|---|
+| `l3/node-loss` | `NODE_LOSS_VOLUME_AVAILABLE_OK` | `NODE_LOSS_SKIPPED_OK` |
+| `l3/dr-restore` | `DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK` (+ `OFF_CLUSTER_TARGET_OK`, `BACKUPS_ARE_SCHEDULED_OK`) | `DR_RESTORE_SKIPPED_OK`, `DR_SCHEDULE_SKIPPED_OK` |
+| `l3/data-survival` | `DATA_SURVIVED_OK` | `DATA_SURVIVAL_SKIPPED_OK` |
+| `l3/vm-data-survival` | `VM_DATA_SURVIVED_OK` | `VM_DATA_SURVIVAL_SKIPPED_OK` |
+| `l3/hands-off-update` | `HANDS_OFF_UPDATE_OK` | `HANDS_OFF_UPDATE_SKIPPED_OK` |
+| `l2/vm-lifecycle` | `VM_LIFECYCLE_OK` | `VM_LIFECYCLE_SKIPPED_OK` |
+| `l2/vm-default-deny` | `VM_DEFAULT_DENY_OK` | `VM_DEFAULT_DENY_SKIPPED_OK` |
+
+A row reaches `proof: "proven"` on **one** path: JUnit `passed`, **every** declared pass
+token present in that test's log lines, and **no** skip token anywhere in them. A skip
+token beats a pass token (worst wins). Anything else is `skipped`, `failed`,
+`junit-skipped`, `unknown-no-sentinel-declared` or `unknown-sentinel-absent` — all
+non-green. L0/L1 need no sentinel because `lib/run_l1_offline.py` already renders their
+skips as JUnit `<skipped/>`, never as a green pass.
+
+### Staleness — a proof is a claim about a tree, not a badge
+
+`--status` honours a `proven` row only while the run's `git_sha` is a **descendant of the
+last commit touching that requirement's implementing manifests or its verifying test**.
+Otherwise the row degrades to **`stale-proof`**, which is not green. A run captured from a
+dirty working tree is recorded as `<sha>-dirty`, which no ancestry check can satisfy — so
+it never counts. Re-run with `--record` to refresh.
+
+A requirement reads `proven` only when **every** verifying test does; one skipped, failed
+or unrecorded test drags the whole requirement down. With an empty ledger `--status`
+behaves exactly as before: every requirement `not-derivable`, headline **PROVEN 0**.
+
 ## How CI invokes it
 CI (Gitea Actions, wired in T-0.2 / migrated in T-6.1b) calls **this same `run.sh`**:
 

conformance/lib/record_run.py

@@ -0,0 +1,949 @@
+#!/usr/bin/env python3
+"""Append a conformance RUN LEDGER row per testcase — the committed proof-of-pass record.
+
+WHY THIS EXISTS
+---------------
+`lib/status.py` reports PROOF as `not-derivable` for every requirement, and names its own
+fix in its docstring: *"a committed, machine-readable run ledger"*. There was none, because
+`conformance/_artifacts/` is git-ignored and the root `.gitignore` kills `*.junit.xml` and
+`coverage/` globally, so nothing about a green run ever reached repo state. This tool is
+that ledger's writer: it reads one run's JUnit + run log out of `conformance/runs/<run-id>/`
+and appends one JSON object per testcase to `conformance/runs/ledger.jsonl`, which IS
+tracked (see conformance/.gitignore for the negations that let it survive).
+
+THE TRAP THIS TOOL EXISTS TO AVOID — READ BEFORE CHANGING ANYTHING
+------------------------------------------------------------------
+The L2/L3 tests are RUNNABLE / SELF-SKIPPING: when a precondition is absent (no `longhorn`
+StorageClass, no Velero CRDs, <3 Ready nodes) they echo a skip token and `exit 0`, and their
+`check:` block is deliberately written to accept either outcome, e.g. tests/l3-fault-
+injection/dr-restore:
+
+    (contains($stdout, 'DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK')
+     || contains($stdout, 'DR_RESTORE_SKIPPED_OK')): true
+
+So a SELF-SKIP exits 0 and Chainsaw records `passed` EXACTLY as a real run does. And
+Chainsaw's JUnit carries no stdout — its `<testcase>` elements hold only `<properties>`
+(verified against the committed reports). Therefore:
+
+  *** A COMMITTED JUnit ALONE WOULD RECORD `DR_RESTORE_SKIPPED_OK` AS PROOF OF R-STATE-03. ***
+
+AND THE SECOND TRAP, WHICH IS THE MIRROR OF THE FIRST
+------------------------------------------------------
+Chainsaw echoes each script's SOURCE into an indented `=== COMMAND` block before running
+it, so `echo NODE_LOSS_SKIPPED_OK` — the skip branch that was NOT taken — is present in
+the log of every run of that test. A section-blind grep therefore reads a skip token out
+of the source of every skip-gated test and can never record `proven` for any of them: the
+ledger fails closed so completely that it records nothing and proves nothing. Tokens are
+consequently read from SECTIONS (see classify_sections): a pass token only from
+`=== STDOUT`, a skip token from any section that is not script source. Skip still beats
+pass — within genuine output, which is the only place either was ever evidence.
+
+That is the fake-green this project refuses, and it would be worse than no ledger at all
+because it would look authoritative. THE SENTINEL TOKEN IS THE ONLY THING THAT SEPARATES
+PROVEN FROM SKIPPED, AND IT EXISTS ONLY IN THE RUN LOG. Hence: this tool requires BOTH
+files, and for the Chainsaw layers it will NEVER emit `proof: "proven"` on a JUnit `passed`
+unless the log carries that test's own pass token and carries NO skip token.
+
+HOW THE TOKENS ARE OBTAINED (derived, never hand-listed)
+--------------------------------------------------------
+Hard-coding a token table would rot the moment a test is edited. Instead every token is
+parsed out of the test's own `chainsaw-test.yaml`: each `contains($stdout, 'TOKEN')` in a
+`check:` block is a declared sentinel. Classification is by the project's naming convention
+(`*_SKIP*_OK` is a skip token, anything else is a pass token), and the TERMINAL pass token
+— the last non-skip token in file order — is the test's verdict token. Edit a test's tokens
+and this tool follows automatically; delete them and the test simply becomes unprovable
+rather than silently proven.
+
+  node-loss   pass NODE_LOSS_VOLUME_AVAILABLE_OK              skip NODE_LOSS_SKIPPED_OK
+  dr-restore  pass DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK     skip DR_RESTORE_SKIPPED_OK
+              (+ OFF_CLUSTER_TARGET_OK, BACKUPS_ARE_SCHEDULED_OK / DR_SCHEDULE_SKIPPED_OK)
+
+WHY L0/L1 NEED NO SENTINEL (and why that is not a loophole)
+-----------------------------------------------------------
+The offline layers are not run by Chainsaw. `lib/run_l1_offline.py` shells out to each
+dir's `check.sh` / `render-check.sh` and maps exit 3 to a JUnit `<skipped/>` element and
+any other non-zero to `<failure>`. A self-skip there is ALREADY a JUnit skip, never a green
+pass, so the JUnit is a truthful record on its own. Only the Chainsaw layers (L2/L3/META)
+can express "skipped" as "passed", and only they require a sentinel — see
+SENTINEL_REQUIRED_LAYERS.
+
+LEDGER ROW (conformance/runs/ledger.jsonl — append-only, one object per testcase per run)
+  ts_utc            run-dir timestamp, else the JUnit's mtime      (when)
+  git_sha           `git rev-parse HEAD`, suffixed `-dirty` when tracked files were
+                    modified — a proof captured from a dirty tree is NOT honoured by
+                    status.py, because what ran is not what is committed  (what)
+  env               --env / CONF_ENV (cluster overlay the run targeted)
+  chainsaw_version  CHAINSAW_VERSION from versions.env (the pin IS the truth)
+  kube_version      `kubectl version` server gitVersion, else "unknown"
+  layer             L0|L1|L2|L3|META, from the test's `layer` annotation / JUnit property
+  test              testcase name (== the test dir basename, asserted by convention)
+  requirements[]    the `conformance.home.k3s/R-*` labels on the test — the SAME
+                    authoritative source coverage.py uses, not the JUnit classname
+  junit_result      passed | failed | error | skipped
+  sentinel          the DECIDING token grepped from run.log, or null
+  proof             proven | skipped | failed | junit-skipped
+                    | unknown-no-sentinel-declared | unknown-sentinel-absent
+  run_id            the runs/<dir> name (provenance: which log backs this row)
+  note              one line saying WHY this row landed on that proof state
+
+`proven` is emitted on exactly one path (see decide()); every other path is non-green.
+
+RECORDING IS EXPLICIT, NEVER IMPLICIT
+-------------------------------------
+Invoke this tool by hand, or via `run.sh --record`. A run that silently records itself is
+how a bad run becomes a permanent false proof, so `run.sh` without `--record` writes no
+ledger row at all.
+
+EXIT CODES (ci/lib.sh convention: 0 pass / 1 fail / 3 skipped-not-green)
+  0  rows appended.
+  1  a real failure: unparsable JUnit, unreadable test tree, unwritable ledger.
+  3  the inputs a ledger row needs are absent (no report.junit.xml, or no run.log).
+     NOTHING is recorded and this is NEVER green — a run we cannot evidence is not a run.
+
+Pure standard library, matching the harness's no-pip-dependency posture (coverage.py,
+status.py). PyYAML lives in catalog/render.py; the harness does not depend on it.
+"""
+from __future__ import annotations
+
+import argparse
+import json
+import os
+import re
+import subprocess
+import sys
+import time
+import xml.etree.ElementTree as ET
+from pathlib import Path
+
+_LIB = Path(__file__).resolve().parent
+if str(_LIB) not in sys.path:
+    sys.path.insert(0, str(_LIB))
+# Importing a sibling would otherwise litter conformance/lib/__pycache__/ into the working
+# tree, and the lint stage scans untracked files. Same guard as status.py.
+sys.dont_write_bytecode = True
+import coverage as cov  # noqa: E402  — reuse the registry/test parsers, don't fork them
+
+CONF_ROOT = _LIB.parent
+REPO_ROOT = CONF_ROOT.parent
+DEFAULT_LEDGER = CONF_ROOT / "runs" / "ledger.jsonl"
+
+# The ONLY layers exempt from needing a pass sentinel: the offline ones, whose skips
+# lib/run_l1_offline.py already renders as JUnit <skipped/> rather than as a green pass
+# (see docstring). Written as an EXEMPT set, not a REQUIRED set, so that an unrecognised
+# or new layer fails CLOSED — it needs a sentinel — instead of quietly becoming provable
+# by JUnit alone.
+SENTINEL_EXEMPT_LAYERS = frozenset({"L0", "L1"})
+
+# Layer from the test's subtree. Authoritative over the annotation: coverage.py's layer
+# regex stops at the first non-[L/A/M/0-9] character, so `layer: "META"` parses as "M" —
+# harmless for its own report, but here a mis-read layer decides whether a sentinel is
+# required at all, so it is derived from the path exactly as emit_skipped_junit.py does.
+_LAYER_BY_SUBTREE = (("/l0-static/", "L0"), ("/l1-rendering/", "L1"),
+                     ("/l2-behavioral/", "L2"), ("/l3-fault-injection/", "L3"),
+                     ("/meta/", "META"))
+
+
+def layer_of(path: Path) -> str:
+    rel = str(path)
+    for frag, layer in _LAYER_BY_SUBTREE:
+        if frag in rel:
+            return layer
+    return ""
+
+# A declared sentinel: `contains($stdout, 'TOKEN')` inside a Chainsaw `check:` block.
+# Both quote styles are accepted; the repo uses single quotes throughout.
+_SENTINEL_RE = re.compile(r"contains\(\s*\$stdout\s*,\s*['\"]([A-Za-z0-9_]+)['\"]\s*\)")
+
+# Naming convention for a SKIP token (tests/l3-fault-injection/*: NODE_LOSS_SKIPPED_OK,
+# DR_RESTORE_SKIPPED_OK, DR_SCHEDULE_SKIPPED_OK, VM_DATA_SURVIVAL_SKIPPED_OK, ...).
+# Deliberately broad: mis-classifying a PASS token as a skip only ever loses a proof;
+# mis-classifying a SKIP token as a pass would manufacture one.
+_SKIP_TOKEN_RE = re.compile(r"_SKIP")
+
+# A Chainsaw log line header, as it really appears (Go `t.Log` prefixes the source site and
+# pads it with backspaces, and the fields are ANSI-coloured — both are stripped first):
+#     l.go:52: | 23:51:18 | node-loss | volume-stays-available... | SCRIPT | LOG |
+# Field 2 is the test name; it is how output is attributed back to a testcase. The
+# `<file>.go:<line>:` prefix is optional so a redirected/plain log still attributes.
+_LOG_HEADER_RE = re.compile(
+    r"^\s*(?:[\w./-]+\.go:\d+:\s*)?"
+    r"\|\s*\d{1,2}:\d{2}:\d{2}(?:\.\d+)?\s*\|\s*([A-Za-z0-9][A-Za-z0-9._-]*)\s*\|")
+
+# ANSI colour + the backspace padding Go writes ahead of a `t.Log` continuation. Stripped
+# before ANY parsing; neither ever appears at the head of a line, so indentation survives.
+_ANSI_RE = re.compile(r"\x1b\[[0-9;]*[A-Za-z]")
+
+
+def _strip_noise(line: str) -> str:
+    return _ANSI_RE.sub("", line).replace("\b", "")
+
+
+# ===================================================================== output sections
+# THE BUG THIS SECTION MACHINERY EXISTS TO KILL — READ BEFORE CHANGING ANYTHING
+# -----------------------------------------------------------------------------
+# Chainsaw echoes the script it is ABOUT TO RUN, verbatim, in an indented `=== COMMAND`
+# block, and only afterwards prints what the script actually wrote in `=== STDOUT`. Every
+# skip-gated test contains its own skip token as SOURCE TEXT (`echo NODE_LOSS_SKIPPED_OK`),
+# so a raw whole-log grep finds that token in EVERY run of that test — including runs that
+# never took the skip branch. Combined with decide()'s (correct) rule that a skip token
+# outranks a pass token, a section-blind scan can never record `proven` for ANY test that
+# has a skip gate: the ledger fails closed so hard it records nothing. Observed on
+# runs/20260901T235117Z-e9a4b66, where NODE_LOSS_SKIPPED_OK appears twice as source at
+# lines 51/62 (`=== COMMAND`) and never in output, yet the run genuinely proved R-STATE-02.
+#
+# So tokens are attributed to SECTIONS, never to raw lines:
+#     l.go:52: | 23:51:18 | node-loss | step | CMD    | RUN |     <- header, no section
+#         === COMMAND                                            <- marker (indent 8)
+#         /usr/bin/sh -c set -euo pipefail                       <- source, indent >= 8
+#           echo NODE_LOSS_SKIPPED_OK                            <- SOURCE, not output
+#     l.go:52: | 23:52:42 | node-loss | step | SCRIPT | LOG |    <- indent 4 => section ends
+#         === STDOUT                                             <- marker
+#         NODE_LOSS_VOLUME_AVAILABLE_OK                          <- the REAL emission
+#
+# A marker is an INDENTED `=== NAME` on a line of its own. Go's own test markers
+# (`=== RUN   chainsaw`, `=== PAUSE`, `=== CONT`) are at column 0 and carry a test name
+# after the verb, so they match neither the indent nor the end-of-line anchor; they are
+# additionally named in _GO_TEST_MARKERS so a future indented variant still cannot open a
+# section that would swallow the whole log.
+_SECTION_MARKER_RE = re.compile(r"^(\s+)=== ([A-Z][A-Z0-9_]*)\s*$")
+_GO_TEST_MARKERS = frozenset({"RUN", "PAUSE", "CONT"})
+
+# Pseudo-section for a log that contains NO section markers at all (the plain/redirected
+# logs the earlier ledger rows were written from, and the selftest fixtures). Such a log
+# never echoes script source, so there is nothing to be confused by and the legacy
+# whole-log scan is exactly as safe as it was — narrowing is only needed where a COMMAND
+# echo exists. Lines OUTSIDE a section in a log that DOES use sections are attributed to
+# "" and are evidence for nothing.
+UNSECTIONED = "*"
+
+# A pass token counts ONLY where Chainsaw's own `contains($stdout, ...)` check looks:
+# real stdout. Anything else — source echo, stderr, an unrecognised future section — can
+# never manufacture a proof.
+PASS_SECTIONS = frozenset({"STDOUT", UNSECTIONED})
+
+# Sections that carry SOURCE rather than output. A skip token is honoured in every OTHER
+# section (STDOUT, STDERR, any section name added by a later Chainsaw release), because
+# over-reading a skip only ever COSTS a proof, while over-reading a pass would fabricate
+# one. Unknown section names therefore fail closed in both directions.
+SOURCE_SECTIONS = frozenset({"COMMAND"})
+
+
+def classify_sections(log_text: str) -> list[tuple[str, str]]:
+    """[(section, line)] for every line of a run log.
+
+    `section` is the enclosing `=== NAME` block, "" for a line inside no block, or
+    UNSECTIONED for every line when the log declares no sections at all. A block runs from
+    its marker until the first non-blank line indented LESS than the marker (blank lines do
+    not end it) or until the next marker; the marker line itself is content of nothing.
+    """
+    rows: list[tuple[str, str]] = []
+    cur, cur_indent, sectioned = "", 0, False
+    for raw in log_text.splitlines():
+        line = _strip_noise(raw)
+        m = _SECTION_MARKER_RE.match(line)
+        if m and m.group(2) not in _GO_TEST_MARKERS:
+            sectioned = True
+            cur, cur_indent = m.group(2), len(m.group(1))
+            rows.append(("", line))
+            continue
+        if cur:
+            if not line.strip() or len(line) - len(line.lstrip()) >= cur_indent:
+                rows.append((cur, line))
+                continue
+            cur = ""
+        rows.append(("", line))
+    if not sectioned:
+        return [(UNSECTIONED, line) for _, line in rows]
+    return rows
+
+
+def scan_texts(lines) -> tuple[str, str]:
+    """(text a PASS token may be read from, text a SKIP token may be read from).
+
+    Accepts either [(section, line)] pairs from classify_sections() or a plain list of
+    strings, which is treated as an unsectioned log (legacy whole-log scanning).
+    """
+    pass_lines, skip_lines = [], []
+    for item in lines:
+        section, line = item if isinstance(item, tuple) else (UNSECTIONED, item)
+        if section in PASS_SECTIONS:
+            pass_lines.append(line)
+        if section and section not in SOURCE_SECTIONS:
+            skip_lines.append(line)
+    return "\n".join(pass_lines), "\n".join(skip_lines)
+
+_RUN_ID_TS_RE = re.compile(r"^(\d{8}T\d{6}Z)-")
+
+
+# ========================================================================= sentinels
+def parse_sentinels(test_yaml: Path) -> dict:
+    """Declared sentinel tokens of one Chainsaw test, derived from the test file itself.
+
+    Returns {"pass": [...], "skip": [...], "terminal_pass": str|None}. `terminal_pass` is
+    the LAST non-skip token in file order — the test's verdict token, i.e. the one its
+    final `check:` block asserts (dr-restore -> DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK).
+    A test with no `contains($stdout, ...)` assertion declares no sentinel and is reported
+    unprovable rather than proven; see decide().
+    """
+    try:
+        text = test_yaml.read_text()
+    except (OSError, UnicodeDecodeError):
+        return {"pass": [], "skip": [], "terminal_pass": None}
+    toks = _SENTINEL_RE.findall(text)
+    passes, skips = [], []
+    for t in toks:
+        (skips if _SKIP_TOKEN_RE.search(t) else passes).append(t)
+    # De-duplicate, preserving order (dr-restore names DR_RESTORE_SKIPPED_OK twice).
+    def uniq(xs: list[str]) -> list[str]:
+        return list(dict.fromkeys(xs))
+    passes, skips = uniq(passes), uniq(skips)
+    return {"pass": passes, "skip": skips,
+            "terminal_pass": passes[-1] if passes else None}
+
+
+def sentinel_map(tests_dir: Path) -> dict[str, dict]:
+    """{test-name: sentinels} for every test in the tree.
+
+    Keyed on the Chainsaw `metadata.name`, which is what lands in the JUnit `<testcase
+    name=...>`. This repo keeps that equal to the test's directory basename; the mapping
+    is by name, so it stays correct if that ever drifts.
+    """
+    out: dict[str, dict] = {}
+    for f in sorted(tests_dir.rglob("chainsaw-test.yaml")):
+        meta = cov.parse_test(f)
+        name = meta["name"] or f.parent.name
+        s = parse_sentinels(f)
+        s["dir"] = str(f.parent)
+        s["layer"] = layer_of(f) or meta["layer"]
+        s["requirements"] = meta["labels"]
+        out[name] = s
+    return out
+
+
+# =============================================================================== log
+def attribute_log(log_text: str, known: set[str]) -> tuple[dict[str, list[tuple[str, str]]],
+                                                            bool]:
+    """Split a run log into per-testcase buckets of (section, line) pairs.
+
+    Chainsaw prefixes its log lines with `| HH:MM:SS | <test> | <step> | ...` and prints a
+    script's sections underneath that header, so the test name is carried by a state
+    machine: a header naming a KNOWN test switches the current bucket, every following line
+    lands in it. Requiring the name to be known is what stops run.sh's own `[run.sh]`
+    chatter (and any other pipe-shaped line) from opening a bogus bucket.
+
+    Section labels come from classify_sections() and travel WITH the lines, so a bucket
+    still knows which of its lines were script source and which were real output.
+
+    Returns (buckets, attributed) where `attributed` is False when the log contained no
+    recognisable header at all — the signal for the degraded global scan in decide().
+    """
+    buckets: dict[str, list[tuple[str, str]]] = {}
+    cur: str | None = None
+    attributed = False
+    for section, line in classify_sections(log_text):
+        m = _LOG_HEADER_RE.match(line)
+        if m and m.group(1) in known:
+            cur = m.group(1)
+            attributed = True
+        if cur is not None:
+            buckets.setdefault(cur, []).append((section, line))
+    return buckets, attributed
+
+
+def unique_tokens(smap: dict[str, dict]) -> set[str]:
+    """Tokens claimed by EXACTLY ONE test in the tree.
+
+    Only these may be used by the degraded global scan: `DNS_OK` is echoed by two different
+    tests, so in an unattributable log it can never be evidence for either; but
+    `NODE_LOSS_VOLUME_AVAILABLE_OK` names precisely one test and still can.
+    """
+    owners: dict[str, set[str]] = {}
+    for name, s in smap.items():
+        for t in s["pass"] + s["skip"]:
+            owners.setdefault(t, set()).add(name)
+    return {t for t, o in owners.items() if len(o) == 1}
+
+
+# ============================================================================ decide
+def decide(layer: str, junit_result: str, sent: dict, lines: list[str],
+           scope: str) -> tuple[str | None, str, str]:
+    """The ONE place a testcase becomes `proven` — or, far more often, does not.
+
+    Returns (sentinel, proof, note).
+
+    Ordering is worst-first ON PURPOSE, so that ambiguity can only ever cost a proof:
+      1. JUnit failure/error            -> failed        (a red run is recorded as red)
+      2. JUnit <skipped/>               -> junit-skipped  (never green; ci/lib.sh rule)
+      3. ANY declared skip token seen   -> skipped        (BEATS a green JUnit and beats
+           IN REAL OUTPUT                                  the pass token: if any gated
+                                                           step self-skipped, the run did
+                                                           not prove the requirement)
+      4. no sentinel declared           -> proven only for L0/L1, whose skips are already
+                                           JUnit skips; unknown-no-sentinel-declared for
+                                           the Chainsaw layers
+      5. EVERY declared pass token seen -> proven
+      6. anything else                  -> unknown-sentinel-absent
+    Step 5 requires ALL pass tokens, not just the terminal one: every Chainsaw step here
+    asserts `pass || skip`, so a missing pass token means a step did not reach its proven
+    branch, whatever the JUnit says.
+
+    Steps 3 and 5 read from SECTION-SCOPED text, never from raw lines: a pass token counts
+    only in `=== STDOUT`, a skip token counts in any section that is not script source.
+    That narrows WHERE a token is read from and changes nothing about what it means — skip
+    still outranks pass, and it outranks it within genuine output, which is the only place
+    either of them was ever evidence. `lines` may be [(section, line)] pairs or plain
+    strings (an unsectioned log; see scan_texts / UNSECTIONED).
+    """
+    if junit_result in ("failed", "error"):
+        return (None, "failed", f"JUnit recorded {junit_result}")
+    if junit_result == "skipped":
+        return (None, "junit-skipped",
+                "JUnit <skipped/> — the test did not execute; a skip is never green")
+
+    pass_text, skip_text = scan_texts(lines)
+    seen_skip = [t for t in sent["skip"] if t in skip_text]
+    if seen_skip:
+        return (seen_skip[0], "skipped",
+                f"run log OUTPUT carries the SELF-SKIP token {seen_skip[0]!r} — the test "
+                f"exited 0 without exercising the behaviour, so this is NOT proof")
+
+    if not sent["pass"] and not sent["skip"]:
+        if layer not in SENTINEL_EXEMPT_LAYERS:
+            return (None, "unknown-no-sentinel-declared",
+                    f"{layer or 'unknown-layer'} test declares no contains($stdout, ...) "
+                    f"sentinel, so a green JUnit cannot be told apart from a self-skip — "
+                    f"refusing to call it proven")
+        return (None, "proven",
+                f"{layer} offline check exited 0; run_l1_offline.py renders its skips as "
+                f"JUnit <skipped/>, so a green JUnit is truthful without a sentinel")
+
+    missing = [t for t in sent["pass"] if t not in pass_text]
+    if not missing:
+        return (sent["terminal_pass"], "proven",
+                f"run log OUTPUT carries every declared pass token "
+                f"({', '.join(sent['pass'])}) and no skip token [{scope}]")
+    return (None, "unknown-sentinel-absent",
+            f"run log OUTPUT lacks pass token(s) {', '.join(missing)} for this test "
+            f"[{scope}] — refusing to infer proof from the JUnit alone")
+
+
+# ============================================================================= junit
+def junit_cases(path: Path) -> list[dict]:
+    """[{name, layer, requirements, result}] for every <testcase> in a JUnit report."""
+    root = ET.parse(path).getroot()
+    cases: list[dict] = []
+    for c in root.iter("testcase"):
+        if c.find("failure") is not None:
+            result = "failed"
+        elif c.find("error") is not None:
+            result = "error"
+        elif c.find("skipped") is not None:
+            result = "skipped"
+        else:
+            result = "passed"
+        props = {p.get("name"): (p.get("value") or "")
+                 for p in c.iter("property") if p.get("name")}
+        reqs = sorted(set(cov.RID_RE.findall(props.get("requirements", ""))))
+        layer = (props.get("layer") or "").upper()
+        if not layer:
+            layer = (c.get("classname") or "").split(":", 1)[0].upper()
+        cases.append({"name": c.get("name") or "?", "layer": layer,
+                      "requirements": reqs, "result": result})
+    return cases
+
+
+# =============================================================================== git
+def git_sha(repo: Path) -> str:
+    """HEAD, suffixed `-dirty` when TRACKED files differ from it.
+
+    Untracked files are deliberately ignored, matching status.py's `tracked_files()`
+    posture (untracked scratch is not repo state) — and because a `--record` run creates
+    untracked `runs/<id>/` files as it goes, which would otherwise mark every run dirty.
+    A `-dirty` sha is not a valid rev, so status.py's ancestry check cannot resolve it and
+    the proof degrades to `stale-proof`: correct, since what ran is not what is committed.
+    """
+    try:
+        sha = subprocess.run(["git", "-C", str(repo), "rev-parse", "HEAD"],
+                             capture_output=True, text=True, check=True).stdout.strip()
+    except (subprocess.CalledProcessError, OSError):
+        return "unknown"
+    dirty = subprocess.run(["git", "-C", str(repo), "diff", "--quiet", "HEAD", "--"],
+                           capture_output=True).returncode != 0
+    return f"{sha}-dirty" if dirty else sha
+
+
+def pinned_chainsaw_version(conf_root: Path) -> str:
+    """CHAINSAW_VERSION from versions.env — the pin is the single source of truth."""
+    f = conf_root / "versions.env"
+    if f.is_file():
+        m = re.search(r'^CHAINSAW_VERSION="?([^"\n]+)"?', f.read_text(), re.M)
+        if m:
+            return m.group(1)
+    return "unknown"
+
+
+def server_kube_version() -> str:
+    """Server gitVersion via `kubectl version` (read-only), else "unknown"."""
+    for args in (["kubectl", "version", "-o", "json"],
+                 ["kubectl", "version", "--output=json"]):
+        try:
+            p = subprocess.run(args, capture_output=True, text=True, timeout=15)
+        except (OSError, subprocess.TimeoutExpired):
+            continue
+        if p.returncode != 0 or not p.stdout.strip():
+            continue
+        try:
+            v = json.loads(p.stdout).get("serverVersion") or {}
+        except json.JSONDecodeError:
+            continue
+        if v.get("gitVersion"):
+            return v["gitVersion"]
+    return "unknown"
+
+
+def run_timestamp(run_dir: Path, junit: Path) -> str:
+    """UTC stamp: the run-dir name's own `<UTC>-<sha>` prefix, else the JUnit's mtime."""
+    m = _RUN_ID_TS_RE.match(run_dir.name)
+    if m:
+        t = m.group(1)
+        return f"{t[0:4]}-{t[4:6]}-{t[6:8]}T{t[9:11]}:{t[11:13]}:{t[13:15]}Z"
+    return time.strftime("%Y-%m-%dT%H:%M:%SZ", time.gmtime(junit.stat().st_mtime))
+
+
+# ============================================================================ record
+def build_rows(run_dir: Path, tests_dir: Path, env: str, chainsaw_version: str,
+               kube_version: str, sha: str) -> list[dict]:
+    junit = run_dir / "report.junit.xml"
+    log = run_dir / "run.log"
+    smap = sentinel_map(tests_dir)
+    log_text = log.read_text(errors="replace")
+    buckets, attributed = attribute_log(log_text, set(smap))
+    uniq = unique_tokens(smap)
+    all_pairs = classify_sections(log_text)
+    sectioned = any(sec not in ("", UNSECTIONED) for sec, _ in all_pairs)
+    section_note = ("tokens read from real-output sections only"
+                    if sectioned else "log declares no === sections; whole-log scan")
+    ts = run_timestamp(run_dir, junit)
+
+    rows: list[dict] = []
+    for case in junit_cases(junit):
+        name = case["name"]
+        sent = smap.get(name, {"pass": [], "skip": [], "terminal_pass": None,
+                               "layer": case["layer"], "requirements": []})
+        layer = sent.get("layer") or case["layer"] or "?"
+        # Requirements come from the test's LABELS (coverage.py's authoritative source);
+        # the JUnit property is the fallback for a testcase with no matching test file.
+        reqs = sent.get("requirements") or case["requirements"]
+
+        if name in buckets:
+            lines, scope = buckets[name], f"log scoped to this testcase; {section_note}"
+        elif not attributed:
+            # Degraded mode: the log had no recognisable Chainsaw header (a redirected or
+            # reformatted log). Fall back to a whole-log scan, but ONLY for tokens owned by
+            # exactly one test, so a token another test emitted can never prove this one.
+            lines = all_pairs
+            sent = dict(sent,
+                        **{"pass": [t for t in sent["pass"] if t in uniq],
+                           "skip": [t for t in sent["skip"] if t in uniq]})
+            sent["terminal_pass"] = sent["pass"][-1] if sent["pass"] else None
+            scope = ("DEGRADED: unattributable log, globally-unique tokens only; "
+                     + section_note)
+        else:
+            lines, scope = [], "no log lines attributed to this testcase"
+
+        sentinel, proof, note = decide(layer, case["result"], sent, lines, scope)
+        rows.append({
+            "ts_utc": ts,
+            "git_sha": sha,
+            "env": env,
+            "chainsaw_version": chainsaw_version,
+            "kube_version": kube_version,
+            "layer": layer,
+            "test": name,
+            "requirements": reqs,
+            "junit_result": case["result"],
+            "sentinel": sentinel,
+            "proof": proof,
+            "run_id": run_dir.name,
+            "note": note,
+        })
+    return rows
+
+
+def append_rows(ledger: Path, rows: list[dict]) -> None:
+    """Append-only, one compact JSON object per line. Never rewrites existing rows."""
+    ledger.parent.mkdir(parents=True, exist_ok=True)
+    with ledger.open("a", encoding="utf-8") as fh:
+        for r in rows:
+            fh.write(json.dumps(r, sort_keys=True) + "\n")
+
+
+# ========================================================================== selftest
+def _selftest() -> int:
+    """Deterministic, no-cluster self-test of every decision rule (house pattern:
+    `status.py --selftest`, `catalog/render.py --selftest`). Throwaway tree only.
+
+    The load-bearing case is `SKIP sentinel does NOT produce proven`: it is the single
+    assertion standing between this ledger and a permanent false proof of R-STATE-03.
+    """
+    import tempfile
+    ok = True
+
+    def check(label: str, cond: bool) -> None:
+        nonlocal ok
+        if not cond:
+            sys.stderr.write(f"record_run.py selftest: FAIL — {label}\n")
+            ok = False
+
+    # --- token derivation, against the dr-restore/node-loss shape ---------------------
+    with tempfile.TemporaryDirectory() as td:
+        root = Path(td)
+        tdir = root / "tests" / "l3-fault-injection" / "dr-restore"
+        tdir.mkdir(parents=True)
+        (tdir / "chainsaw-test.yaml").write_text(
+            "apiVersion: chainsaw.kyverno.io/v1alpha1\nkind: Test\nmetadata:\n"
+            "  name: dr-restore\n  labels:\n"
+            "    conformance.home.k3s/R-STATE-03: \"true\"\n  annotations:\n"
+            "    conformance.home.k3s/requirements: \"R-STATE-03\"\n"
+            "    conformance.home.k3s/layer: \"L3\"\nspec:\n  steps:\n"
+            "    - script:\n        content: 'echo OFF_CLUSTER_TARGET_OK'\n"
+            "        check:\n"
+            "          (contains($stdout, 'OFF_CLUSTER_TARGET_OK')"
+            " || contains($stdout, 'DR_RESTORE_SKIPPED_OK')): true\n"
+            "    - script:\n        content: 'echo x'\n        check:\n"
+            "          (contains($stdout, 'DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK')"
+            " || contains($stdout, 'DR_RESTORE_SKIPPED_OK')): true\n")
+        s = parse_sentinels(tdir / "chainsaw-test.yaml")
+        check("pass tokens derived from the test file",
+              s["pass"] == ["OFF_CLUSTER_TARGET_OK",
+                            "DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"])
+        check("skip token classified by the *_SKIP*_OK convention, de-duplicated",
+              s["skip"] == ["DR_RESTORE_SKIPPED_OK"])
+        check("terminal pass token is the LAST non-skip token",
+              s["terminal_pass"] == "DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK")
+
+        smap = sentinel_map(root / "tests")
+        check("sentinel_map keys on metadata.name and carries layer + labels",
+              smap["dr-restore"]["layer"] == "L3"
+              and smap["dr-restore"]["requirements"] == ["R-STATE-03"])
+
+    # --- decide(): the SKIP-is-never-proven contract ----------------------------------
+    l3 = {"pass": ["DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"],
+          "skip": ["DR_RESTORE_SKIPPED_OK"],
+          "terminal_pass": "DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"}
+
+    # *** THE CASE THIS WHOLE FILE EXISTS FOR ***
+    sent, proof, _ = decide("L3", "passed", l3, ["DR_RESTORE_SKIPPED_OK"], "t")
+    check("SKIP sentinel on a GREEN JUnit is 'skipped', NEVER 'proven'",
+          proof == "skipped" and sent == "DR_RESTORE_SKIPPED_OK")
+
+    _, proof, _ = decide("L3", "passed", l3,
+                         ["DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"], "t")
+    check("pass sentinel on a green JUnit is 'proven'", proof == "proven")
+
+    _, proof, _ = decide("L3", "passed", l3,
+                         ["DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK",
+                          "DR_RESTORE_SKIPPED_OK"], "t")
+    check("a skip token BEATS a pass token in the same log (worst wins)",
+          proof == "skipped")
+
+    _, proof, _ = decide("L3", "passed", l3, ["nothing relevant here"], "t")
+    check("green JUnit with no sentinel in the log is unknown, not proven",
+          proof == "unknown-sentinel-absent")
+
+    _, proof, _ = decide("L3", "passed", l3, [], "t")
+    check("green JUnit with NO log lines attributed is unknown, not proven",
+          proof == "unknown-sentinel-absent")
+
+    _, proof, _ = decide("L3", "failed", l3,
+                         ["DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"], "t")
+    check("a failing JUnit outranks a pass token in the log", proof == "failed")
+
+    _, proof, _ = decide("L3", "skipped", l3, [], "t")
+    check("JUnit <skipped/> records junit-skipped, never green",
+          proof == "junit-skipped")
+
+    multi = {"pass": ["A_OK", "B_OK"], "skip": [], "terminal_pass": "B_OK"}
+    _, proof, _ = decide("L3", "passed", multi, ["B_OK"], "t")
+    check("every declared pass token must be present, not just the terminal one",
+          proof == "unknown-sentinel-absent")
+    _, proof, _ = decide("L3", "passed", multi, ["A_OK", "B_OK"], "t")
+    check("all pass tokens present == proven", proof == "proven")
+
+    none = {"pass": [], "skip": [], "terminal_pass": None}
+    _, proof, _ = decide("L2", "passed", none, ["whatever"], "t")
+    check("a Chainsaw test declaring no sentinel is NOT proven by a green JUnit",
+          proof == "unknown-no-sentinel-declared")
+    _, proof, _ = decide("L1", "passed", none, [], "t")
+    check("L0/L1 offline checks are proven by JUnit (their skips are JUnit skips)",
+          proof == "proven")
+    _, proof, _ = decide("L0", "skipped", none, [], "t")
+    check("an L0 JUnit skip is still never green", proof == "junit-skipped")
+    _, proof, _ = decide("META", "passed", none, [], "t")
+    check("META (a Chainsaw layer) needs a sentinel like L2/L3",
+          proof == "unknown-no-sentinel-declared")
+    _, proof, _ = decide("", "passed", none, [], "t")
+    check("an unknown/blank layer fails CLOSED — sentinel required",
+          proof == "unknown-no-sentinel-declared")
+
+    # --- SECTION SCOPING: the COMMAND echo is SOURCE, never evidence -------------------
+    # Regression cases for the ledger's first real L3 run, which recorded a genuine PASS as
+    # `skipped` because `echo NODE_LOSS_SKIPPED_OK` — the skip branch NOT taken — is echoed
+    # inside `=== COMMAND` on every run of a skip-gated test.
+    nl = {"pass": ["NODE_LOSS_VOLUME_AVAILABLE_OK"],
+          "skip": ["NODE_LOSS_SKIPPED_OK"],
+          "terminal_pass": "NODE_LOSS_VOLUME_AVAILABLE_OK"}
+    _CMD = ("    l.go:52: | 23:51:18 | node-loss | step | CMD    | RUN |\n"
+            "        === COMMAND\n"
+            "        /usr/bin/sh -c set -euo pipefail\n"
+            "        if ! kubectl get storageclass longhorn >/dev/null 2>&1; then\n"
+            "          echo NODE_LOSS_SKIPPED_OK\n"
+            "\n"
+            "          exit 0\n"
+            "        fi\n"
+            "        echo NODE_LOSS_VOLUME_AVAILABLE_OK\n"
+            "    l.go:52: | 23:52:42 | node-loss | step | SCRIPT | LOG |\n")
+
+    ran = classify_sections(_CMD + "        === STDOUT\n"
+                            "        ready nodes: 3\n"
+                            "        NODE_LOSS_VOLUME_AVAILABLE_OK\n"
+                            "    l.go:52: | 23:52:42 | node-loss | step | SCRIPT | DONE |\n")
+    sent, proof, _ = decide("L3", "passed", nl, ran, "t")
+    check("skip token ONLY in the COMMAND echo + pass token in STDOUT is PROVEN",
+          proof == "proven" and sent == "NODE_LOSS_VOLUME_AVAILABLE_OK")
+
+    selfskipped = classify_sections(_CMD + "        === STDOUT\n"
+                                    "        SKIP: 'longhorn' StorageClass absent\n"
+                                    "        NODE_LOSS_SKIPPED_OK\n")
+    sent, proof, _ = decide("L3", "passed", nl, selfskipped, "t")
+    check("skip token GENUINELY in STDOUT is still 'skipped' (the guarantee holds)",
+          proof == "skipped" and sent == "NODE_LOSS_SKIPPED_OK")
+
+    neither = classify_sections(_CMD + "        === STDOUT\n        ready nodes: 3\n")
+    _, proof, _ = decide("L3", "passed", nl, neither, "t")
+    check("both tokens in COMMAND and neither in STDOUT is NOT proven",
+          proof == "unknown-sentinel-absent")
+
+    both_out = classify_sections("        === STDOUT\n"
+                                 "        NODE_LOSS_VOLUME_AVAILABLE_OK\n"
+                                 "        NODE_LOSS_SKIPPED_OK\n")
+    _, proof, _ = decide("L3", "passed", nl, both_out, "t")
+    check("skip still BEATS pass when both are in genuine output", proof == "skipped")
+
+    stderr_skip = classify_sections("        === STDERR\n        NODE_LOSS_SKIPPED_OK\n"
+                                    "        === STDOUT\n"
+                                    "        NODE_LOSS_VOLUME_AVAILABLE_OK\n")
+    _, proof, _ = decide("L3", "passed", nl, stderr_skip, "t")
+    check("a skip token in a non-source section (STDERR) still costs the proof",
+          proof == "skipped")
+
+    stderr_pass = classify_sections("        === STDERR\n"
+                                    "        NODE_LOSS_VOLUME_AVAILABLE_OK\n")
+    _, proof, _ = decide("L3", "passed", nl, stderr_pass, "t")
+    check("a pass token OUTSIDE stdout cannot prove anything",
+          proof == "unknown-sentinel-absent")
+
+    # --- classify_sections: markers, extents, and Go's own `=== RUN` --------------------
+    gorows = classify_sections("=== RUN   chainsaw\n=== PAUSE chainsaw\n"
+                               "=== CONT  chainsaw/node-loss\n"
+                               "        === COMMAND\n        echo NODE_LOSS_SKIPPED_OK\n"
+                               "    l.go:52: | 1:00:00 | node-loss | s | SCRIPT | DONE |\n"
+                               "--- PASS: chainsaw/node-loss (131.09s)\n")
+    secs = [sec for sec, _ in gorows]
+    check("Go's column-0 `=== RUN/PAUSE/CONT` never open a section",
+          secs[:3] == ["", "", ""])
+    check("a section covers its indented body and ends at a less-indented line",
+          secs[3] == "" and secs[4] == "COMMAND" and secs[5] == "" and secs[6] == "")
+    check("a log with no === markers stays wholly scannable (UNSECTIONED)",
+          {sec for sec, _ in classify_sections("plain line\n  another\n")} == {UNSECTIONED})
+
+    # --- the preserved run itself, as a fixture ----------------------------------------
+    # runs/20260901T235117Z-e9a4b66 IS the bug: NODE_LOSS_SKIPPED_OK twice in `=== COMMAND`
+    # (source), never in output; NODE_LOSS_VOLUME_AVAILABLE_OK once in `=== STDOUT`.
+    fixture = CONF_ROOT / "runs" / "20260901T235117Z-e9a4b66"
+    if (fixture / "run.log").is_file() and (fixture / "report.junit.xml").is_file():
+        rows = build_rows(fixture, CONF_ROOT / "tests", "dev", "v0.2.12", "v1.36.4", "sha")
+        row = next((r for r in rows if r["test"] == "node-loss"), None)
+        check("preserved real L3 run records node-loss/R-STATE-02 as proven",
+              row is not None and row["proof"] == "proven"
+              and row["sentinel"] == "NODE_LOSS_VOLUME_AVAILABLE_OK"
+              and row["requirements"] == ["R-STATE-02"])
+        check("preserved real L3 run attributes (no DEGRADED fallback needed)",
+              row is not None and "DEGRADED" not in row["note"])
+        pairs = classify_sections((fixture / "run.log").read_text(errors="replace"))
+        secs = {sec for sec, line in pairs if "NODE_LOSS_SKIPPED_OK" in line}
+        check("every NODE_LOSS_SKIPPED_OK in the preserved log is COMMAND source",
+              secs == {"COMMAND"})
+        secs = {sec for sec, line in pairs
+                if line.strip() == "NODE_LOSS_VOLUME_AVAILABLE_OK"}
+        check("the real emission in the preserved log is in STDOUT", secs == {"STDOUT"})
+
+    # --- log attribution --------------------------------------------------------------
+    log = ("[run.sh] Coverage report first\n"
+           "    | 20:41:32 | node-loss | step | SCRIPT | RUN |\n"
+           "        NODE_LOSS_SKIPPED_OK\n"
+           "    | 20:44:01 | dr-restore | step | SCRIPT | RUN |\n"
+           "        DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK\n")
+    b, attributed = attribute_log(log, {"node-loss", "dr-restore"})
+    check("log lines are attributed to the testcase whose header preceded them",
+          attributed
+          and any("NODE_LOSS_SKIPPED_OK" in l for _, l in b["node-loss"])
+          and not any("NODE_LOSS_SKIPPED_OK" in l for _, l in b["dr-restore"]))
+    check("a pass token does NOT leak across testcase boundaries",
+          not any("DR_RESTORED" in l for _, l in b["node-loss"]))
+    check("an unsectioned log keeps whole-log scanning (nothing narrowed away)",
+          all(sec == UNSECTIONED for sec, _ in b["node-loss"]))
+
+    # Chainsaw's real headers carry a Go `t.Log` source prefix and ANSI colour; the earlier
+    # regex matched neither, so every genuine Chainsaw log silently fell into DEGRADED mode.
+    real_hdr = ("    l.go:52: \x08\x08\x08| 23:51:18 | \x1b[32;1mnode-loss\x1b[0;22m | "
+                "\x1b[32;1mstep\x1b[0;22m | SCRIPT | LOG |\n"
+                "        === STDOUT\n        NODE_LOSS_VOLUME_AVAILABLE_OK\n")
+    b2, attributed_real = attribute_log(real_hdr, {"node-loss"})
+    check("a REAL Chainsaw header (go source prefix + ANSI) attributes, not degrades",
+          attributed_real and "node-loss" in b2
+          and ("STDOUT", "        NODE_LOSS_VOLUME_AVAILABLE_OK") in b2["node-loss"])
+    _, attributed2 = attribute_log("no chainsaw headers at all\n", {"node-loss"})
+    check("an unattributable log is reported as such (degraded mode)", not attributed2)
+
+    smap2 = {"a": {"pass": ["DNS_OK", "A_ONLY_OK"], "skip": []},
+             "b": {"pass": ["DNS_OK"], "skip": []}}
+    check("only tokens owned by exactly one test may be used in degraded mode",
+          unique_tokens(smap2) == {"A_ONLY_OK"})
+
+    # --- end-to-end: a self-skipped L3 run must land in the ledger as `skipped` --------
+    with tempfile.TemporaryDirectory() as td:
+        root = Path(td)
+        tdir = root / "tests" / "l3-fault-injection" / "node-loss"
+        tdir.mkdir(parents=True)
+        (tdir / "chainsaw-test.yaml").write_text(
+            "kind: Test\nmetadata:\n  name: node-loss\n  labels:\n"
+            "    conformance.home.k3s/R-STATE-02: \"true\"\n  annotations:\n"
+            "    conformance.home.k3s/requirements: \"R-STATE-02\"\n"
+            "    conformance.home.k3s/layer: \"L3\"\nspec:\n  steps:\n"
+            "    - script:\n        content: 'echo hi'\n        check:\n"
+            "          (contains($stdout, 'NODE_LOSS_VOLUME_AVAILABLE_OK')"
+            " || contains($stdout, 'NODE_LOSS_SKIPPED_OK')): true\n")
+        rd = root / "runs" / "20260901T120000Z-abc1234"
+        rd.mkdir(parents=True)
+        (rd / "report.junit.xml").write_text(
+            '<testsuites><testsuite><testcase classname="L3:R-STATE-02" '
+            'name="node-loss"><properties>'
+            '<property name="requirements" value="R-STATE-02"/>'
+            '<property name="layer" value="L3"/></properties></testcase>'
+            "</testsuite></testsuites>")
+        (rd / "run.log").write_text(
+            "  | 12:00:01 | node-loss | s | SCRIPT | RUN |\n"
+            "      SKIP: 'longhorn' StorageClass absent\n"
+            "      NODE_LOSS_SKIPPED_OK\n")
+        rows = build_rows(rd, root / "tests", "dev", "v0.2.12", "v1.36.4", "abc1234")
+        check("end-to-end: Chainsaw 'passed' + skip token => proof 'skipped'",
+              len(rows) == 1 and rows[0]["junit_result"] == "passed"
+              and rows[0]["proof"] == "skipped"
+              and rows[0]["sentinel"] == "NODE_LOSS_SKIPPED_OK")
+        check("end-to-end: row carries ts from the run-dir name and the R-ID label",
+              rows[0]["ts_utc"] == "2026-09-01T12:00:00Z"
+              and rows[0]["requirements"] == ["R-STATE-02"])
+
+        (rd / "run.log").write_text(
+            "  | 12:00:01 | node-loss | s | SCRIPT | RUN |\n"
+            "      NODE_LOSS_VOLUME_AVAILABLE_OK\n")
+        rows = build_rows(rd, root / "tests", "dev", "v0.2.12", "v1.36.4", "abc1234")
+        check("end-to-end: Chainsaw 'passed' + pass token => proof 'proven'",
+              rows[0]["proof"] == "proven"
+              and rows[0]["sentinel"] == "NODE_LOSS_VOLUME_AVAILABLE_OK")
+
+        ledger = root / "ledger.jsonl"
+        append_rows(ledger, rows)
+        append_rows(ledger, rows)
+        check("ledger is append-only JSONL (one parsable object per line)",
+              len(ledger.read_text().strip().splitlines()) == 2
+              and json.loads(ledger.read_text().splitlines()[0])["test"] == "node-loss")
+
+    if not ok:
+        return 1
+    sys.stderr.write("record_run.py selftest: PASS\n")
+    return 0
+
+
+# ============================================================================== main
+def main() -> int:
+    ap = argparse.ArgumentParser(description=__doc__,
+                                 formatter_class=argparse.RawDescriptionHelpFormatter)
+    ap.add_argument("--run-dir", type=Path,
+                    help="conformance/runs/<UTC>-<sha>/ holding report.junit.xml + run.log")
+    ap.add_argument("--ledger", type=Path, default=DEFAULT_LEDGER,
+                    help=f"append-only ledger (default {DEFAULT_LEDGER})")
+    ap.add_argument("--tests", type=Path, default=CONF_ROOT / "tests")
+    ap.add_argument("--repo", type=Path, default=REPO_ROOT)
+    ap.add_argument("--env", default=os.environ.get("CONF_ENV", "dev"))
+    ap.add_argument("--chainsaw-version", default=None,
+                    help="override the versions.env pin (recorded verbatim)")
+    ap.add_argument("--kube-version", default=os.environ.get("CONF_KUBE_VERSION"),
+                    help="override the `kubectl version` probe (recorded verbatim)")
+    ap.add_argument("--dry-run", action="store_true",
+                    help="print the rows that WOULD be appended; write nothing")
+    ap.add_argument("--selftest", action="store_true", help="run the built-in self-test")
+    args = ap.parse_args()
+
+    if args.selftest:
+        return _selftest()
+    if args.run_dir is None:
+        sys.stderr.write("[record] --run-dir is required (or use --selftest)\n")
+        return 1
+
+    run_dir = args.run_dir.resolve()
+    junit, log = run_dir / "report.junit.xml", run_dir / "run.log"
+    # BOTH files or nothing. The JUnit alone cannot tell a self-skip from a real pass, so
+    # recording from it alone is exactly the false proof this tool exists to prevent.
+    missing = [p.name for p in (junit, log) if not p.is_file()]
+    if missing:
+        sys.stderr.write(
+            f"[record] {run_dir} is missing {', '.join(missing)} — nothing recorded. "
+            f"The JUnit alone cannot distinguish a self-skip from a real pass "
+            f"(see module docstring). SKIPPED (not green).\n")
+        return 3
+
+    try:
+        rows = build_rows(
+            run_dir, args.tests, args.env,
+            args.chainsaw_version or pinned_chainsaw_version(CONF_ROOT),
+            args.kube_version or server_kube_version(),
+            git_sha(args.repo))
+    except ET.ParseError as e:
+        sys.stderr.write(f"[record] {junit} is not parsable JUnit: {e}\n")
+        return 1
+    except OSError as e:
+        sys.stderr.write(f"[record] cannot read the run inputs: {e}\n")
+        return 1
+
+    if not rows:
+        sys.stderr.write(f"[record] {junit} contains no <testcase> — nothing to record. "
+                         f"SKIPPED (not green).\n")
+        return 3
+
+    for r in rows:
+        print(f"[record] {r['layer']:4s} {r['proof']:28s} {r['test']} "
+              f"({','.join(r['requirements']) or 'untagged'}) "
+              f"junit={r['junit_result']} sentinel={r['sentinel'] or '—'}")
+    counts: dict[str, int] = {}
+    for r in rows:
+        counts[r["proof"]] = counts.get(r["proof"], 0) + 1
+    print(f"[record] {len(rows)} testcase(s): "
+          + ", ".join(f"{k}={v}" for k, v in sorted(counts.items())))
+
+    if args.dry_run:
+        print("[record] --dry-run: ledger NOT written.")
+        return 0
+    try:
+        append_rows(args.ledger, rows)
+    except OSError as e:
+        sys.stderr.write(f"[record] cannot append to {args.ledger}: {e}\n")
+        return 1
+    print(f"[record] appended {len(rows)} row(s) -> {args.ledger}")
+    print("[record] COMMIT the run dir and the ledger; an uncommitted ledger proves nothing.")
+    return 0
+
+
+if __name__ == "__main__":
+    raise SystemExit(main())

conformance/lib/status.py

@@ -15,26 +15,42 @@ This generator derives, from the REPOSITORY ALONE, three orthogonal axes per req
                        from a Flux Kustomization entrypoint (i.e. actually reconciled)?
   2. VERIFICATION    — is there a requirement-tagged test, at which layer, and is it an
                        EXECUTABLE test or a TODO scaffold?
-  3. PROOF           — has that test actually passed?  *** DELIBERATELY NOT DERIVED. ***
+  3. PROOF           — has that test actually passed?  Derived ONLY from the committed
+                       run ledger, and ONLY as far as that ledger's evidence reaches.
 
-WHAT THIS TOOL REFUSES TO DERIVE (and why)
-------------------------------------------
-PROOF-OF-PASS IS NOT DERIVABLE FROM REPO STATE. Nothing tracked in git records a test
-result: `conformance/_artifacts/` and `results/` are git-ignored, and the only prose
-record of a green run lives in DECISIONS-LOG.md — hand-maintained, unstructured, and
-exactly the kind of source the operator has ruled out. The project's own culture is that
-"merged" is never "done" (agents/definition-of-done.md, R-TEST-03), so this report will
-NOT infer, guess, or default a requirement to green. Every requirement's proof state is
-reported as `not-derivable`, and the headline says so. If an untracked JUnit artifact
-happens to be lying in the workspace it is surfaced ONLY as a quarantined advisory with
-its mtime — never counted, never mixed into a status.
+PROOF — WHAT CHANGED, AND WHAT DID NOT
+--------------------------------------
+This report used to say `not-derivable` for every requirement, because nothing tracked in
+git recorded a test result and the only prose record of a green run lived in
+DECISIONS-LOG.md — hand-maintained, unstructured, exactly the source the operator ruled
+out. The fix this docstring asked for now exists: `conformance/runs/ledger.jsonl`, an
+append-only ledger written by `lib/record_run.py` from a run's JUnit **and its run log**
+(see conformance/.gitignore for the negations that keep both in git).
 
-The honest fix is a committed, machine-readable run ledger; until that exists, the most
-this report can say is "wired and testable", never "proven".
+THE REFUSAL POSTURE IS UNCHANGED. Evidence replaced "not derivable" only where evidence
+exists; nowhere is optimism substituted for it:
+
+  * A ledger row reaches `proven` only if `record_run.py` saw that test's own PASS
+    sentinel token in the run log. The L2/L3 tests SELF-SKIP GREEN — Chainsaw records
+    `passed` on `DR_RESTORE_SKIPPED_OK` exactly as on a real run, and its JUnit carries no
+    stdout — so a skip token maps to `skipped` and can never become proof.
+  * A proof is honoured only while it still describes the current code: if any of the
+    requirement's implementing manifests or verifying tests changed in a commit that is
+    NOT an ancestor of the run's `git_sha`, the row degrades to `stale-proof`, which is
+    not green. A run recorded from a dirty tree (`<sha>-dirty`) is never honoured.
+  * A requirement with no ledger row, or whose verifying tests did not ALL report proven,
+    stays `not-derivable` / `unknown` — never rounded up.
+  * The untracked `_artifacts/report.junit.xml` is STILL only a quarantined advisory with
+    its mtime. It is not the ledger, it is not evidence, and it feeds no status.
+
+With an empty or absent ledger this report behaves exactly as it did before: every
+requirement `not-derivable`, headline PROVEN 0, "the most this report can say is wired and
+testable, never proven".
 
 READS (all read-only)
   requirements/registry.yaml     the authoritative R-* mirror  (via lib/coverage.py)
   tests/**/chainsaw-test.yaml    requirement tags + layer + executable annotation
+  runs/ledger.jsonl              COMMITTED proof-of-pass rows (via lib/record_run.py)
   clusters/<env>/               Flux entrypoint -> the reconciliation graph
   `git ls-files`                 TRACKED files only; untracked scratch is not repo state
   ../home-network-k3s/docs/00-vision-and-scope.md   OPTIONAL registry<->spec parity check
@@ -92,7 +108,14 @@ FLUX_API = "kustomize.toolkit.fluxcd.io"
 #   conformance/tests — those are the TESTS; they are the VERIFICATION axis, counted there.
 #   ci/tests          — gate unit-test fixtures embed example R-IDs as DATA.
 #   registry.yaml     — the requirement mirror itself, not an implementation of anything.
-IMPL_EXCLUDE_PREFIXES = ("conformance/tests/", "ci/tests/")
+# `conformance/runs/` is excluded for a subtler reason than the test dirs: the ledger and the
+# preserved run logs CONTAIN the requirement IDs they are evidence FOR. Counting them as
+# implementing evidence makes `last_change` move every time proof is recorded, so a row's
+# git_sha always predates it and EVERY proof degrades to stale-proof the instant it is
+# committed — recording the proof destroys it. The ledger is the proof record; it must not
+# participate in the freshness computation about itself. (Found live 2026-09-01 on the first
+# PROVEN row.)
+IMPL_EXCLUDE_PREFIXES = ("conformance/tests/", "ci/tests/", "conformance/runs/")
 IMPL_EXCLUDE_PATHS = ("conformance/requirements/registry.yaml",)
 
 
@@ -343,6 +366,169 @@ def spec_requirement_ids(spec_root: Path) -> set[str] | None:
     return set(RID_RE.findall(doc.read_text()))
 
 
+# ========================================================================== ledger
+# PROOF axis. Everything here reads `conformance/runs/ledger.jsonl` (written ONLY by an
+# explicit `lib/record_run.py` / `run.sh --record` invocation) and downgrades relentlessly.
+# Nothing in this section may ever turn absent, ambiguous or aged evidence into green.
+
+DEFAULT_LEDGER = CONF_ROOT / "runs" / "ledger.jsonl"
+
+# Severity ranking, WORST FIRST. A requirement's proof is the MINIMUM over its verifying
+# tests, so one failed/skipped/missing test drags the whole requirement down and a single
+# proven test can never carry the others. `stale-proof` ranks below `proven` on purpose:
+# it is a real past pass that no longer describes the current code, and it is NOT green.
+PROOF_ORDER = {
+    "failed": 0,              # a ledger row recorded a JUnit failure/error
+    "unknown": 1,             # ran, but the log could not evidence pass vs self-skip
+    "not-derivable": 2,       # no ledger row for this test at all (the pre-ledger default)
+    "junit-skipped": 3,       # JUnit <skipped/> — did not execute
+    "skipped": 4,             # SELF-SKIPPED green: exited 0 without exercising the behaviour
+    "stale-proof": 5,         # proven at a sha the implementation/test has since moved past
+    "proven": 6,              # the ONLY green state
+}
+# record_run.py's two "we cannot tell" states collapse to one reported state here; the
+# per-test detail in status.json keeps the distinction for whoever has to fix it.
+_PROOF_ALIASES = {
+    "unknown-no-sentinel-declared": "unknown",
+    "unknown-sentinel-absent": "unknown",
+}
+
+
+def read_ledger(path: Path) -> list[dict]:
+    """Parse the append-only JSONL ledger. A malformed line is SKIPPED, never guessed at.
+
+    Absent or empty file -> [] , which reproduces this report's pre-ledger behaviour
+    exactly (every requirement `not-derivable`, headline PROVEN 0).
+    """
+    if not path.is_file():
+        return []
+    rows: list[dict] = []
+    for line in path.read_text(errors="replace").splitlines():
+        line = line.strip()
+        if not line or line.startswith("#"):
+            continue
+        try:
+            obj = json.loads(line)
+        except json.JSONDecodeError:
+            continue
+        if isinstance(obj, dict) and obj.get("test"):
+            rows.append(obj)
+    return rows
+
+
+def latest_by_test(rows: list[dict]) -> dict[str, dict]:
+    """Most recent ledger row per test name (ts_utc, then file order as the tiebreak).
+
+    Latest wins rather than best-ever: a test that has since gone back to self-skipping
+    must stop reading as proven.
+    """
+    latest: dict[str, dict] = {}
+    for i, r in enumerate(rows):
+        key = r["test"]
+        prev = latest.get(key)
+        if prev is None or (r.get("ts_utc", ""), i) >= (prev.get("ts_utc", ""),
+                                                       prev["_i"]):
+            latest[key] = {**r, "_i": i}
+    return latest
+
+
+class _GitOracle:
+    """Small cached wrapper for the two git questions the staleness rule asks."""
+
+    def __init__(self, repo: Path):
+        self.repo = repo
+        self._last: dict[tuple[str, ...], str | None] = {}
+        self._anc: dict[tuple[str, str], bool] = {}
+
+    def _git(self, *args: str) -> subprocess.CompletedProcess:
+        return subprocess.run(["git", "-C", str(self.repo), *args],
+                              capture_output=True, text=True)
+
+    def last_change(self, paths: tuple[str, ...]) -> str | None:
+        """Commit that last touched any of `paths`; None if git knows none of them."""
+        if not paths:
+            return None
+        if paths in self._last:
+            return self._last[paths]
+        p = self._git("log", "-1", "--format=%H", "--", *paths)
+        sha = p.stdout.strip() if p.returncode == 0 else ""
+        self._last[paths] = sha or None
+        return self._last[paths]
+
+    def is_ancestor(self, older: str, newer: str) -> bool:
+        """True iff `older` is an ancestor of (or equal to) `newer`.
+
+        False whenever either rev is unresolvable — an unknown or `-dirty` sha (a run
+        recorded from a modified working tree) can never satisfy the freshness test, which
+        is the intended fail-closed direction.
+        """
+        key = (older, newer)
+        if key in self._anc:
+            return self._anc[key]
+        ok = self._git("merge-base", "--is-ancestor", older, newer).returncode == 0
+        self._anc[key] = ok
+        return ok
+
+
+def derive_proof(git: _GitOracle, rid: str, verifiers: list[dict],
+                 impl_files: list[dict], latest: dict[str, dict]) -> dict:
+    """PROOF for one requirement, from the ledger, with the staleness rule applied.
+
+    STALENESS RULE — a proof is a claim about a specific tree, not a permanent badge:
+      relevant paths = every implementing artifact this report found for the requirement
+                       + every verifying test's directory
+      last_change    = `git log -1 -- <relevant paths>`
+      A row's `proven` is honoured only if `last_change` is an ANCESTOR of the row's
+      `git_sha`, i.e. the run happened at or after the newest change to the code it
+      claims to prove. Otherwise it degrades to `stale-proof` (not green). A `-dirty`
+      sha, a sha this clone does not have (rebased/dropped), or a path git has never
+      seen (an uncommitted test) all fail the ancestry test and degrade the same way.
+
+    The requirement's state is the MINIMUM over its verifying tests: every verifying test
+    must be proven and fresh before the requirement reads `proven`. A test with no ledger
+    row contributes `not-derivable`, so a partially-recorded run cannot manufacture green.
+    """
+    paths = sorted({f["path"] for f in impl_files}
+                   | {os.path.dirname(v["path"]) for v in verifiers if v.get("path")})
+    last_change = git.last_change(tuple(paths))
+
+    per_test: list[dict] = []
+    for v in verifiers:
+        row = latest.get(v["name"])
+        if row is None:
+            per_test.append({"test": v["name"], "state": "not-derivable",
+                             "reason": "no ledger row — this test has never been "
+                                       "recorded by run.sh --record / record_run.py"})
+            continue
+        base = _PROOF_ALIASES.get(row.get("proof", ""), row.get("proof", "unknown"))
+        if base not in PROOF_ORDER:
+            base = "unknown"
+        state, reason = base, row.get("note", "")
+        if base == "proven":
+            sha = row.get("git_sha", "")
+            if last_change and not git.is_ancestor(last_change, sha):
+                state = "stale-proof"
+                reason = (f"proven at {sha[:12]}, but the implementing manifests / test "
+                          f"changed in {last_change[:12]}, which that run predates")
+        per_test.append({"test": v["name"], "state": state, "reason": reason,
+                         "run_id": row.get("run_id"), "ts_utc": row.get("ts_utc"),
+                         "git_sha": row.get("git_sha"), "env": row.get("env"),
+                         "sentinel": row.get("sentinel"),
+                         "junit_result": row.get("junit_result")})
+
+    if not per_test:
+        state = "not-derivable"
+        reason = "no requirement-tagged test exists to be proven"
+    else:
+        worst = min(per_test, key=lambda d: PROOF_ORDER[d["state"]])
+        state, reason = worst["state"], worst["reason"]
+        if state == "not-derivable" and not reason:
+            reason = "no committed ledger row for this requirement's verifying test(s)"
+
+    return {"state": state, "reason": reason, "last_change_sha": last_change,
+            "evidence_paths": paths, "per_test": per_test}
+
+
 # ========================================================================== build
 IMPL_ORDER = {"none": 0, "off-cluster": 1, "unwired": 2, "reconciled-partial": 3,
               "reconciled": 4}
@@ -369,7 +555,13 @@ LABELS = {
 
 def build(repo: Path, registry: list[dict], tests: list[dict], impl: dict[str, list[dict]],
           applied: set[str], gitops_roots: set[str], spec_ids: set[str] | None,
-          env: str) -> dict:
+          env: str, ledger_rows: list[dict] | None = None) -> dict:
+    # PROOF axis inputs. `ledger_rows=None` / `[]` reproduces the pre-ledger behaviour:
+    # `latest` is empty, so every requirement derives `not-derivable` exactly as before.
+    ledger_rows = ledger_rows or []
+    latest = latest_by_test(ledger_rows)
+    git = _GitOracle(repo)
+
     classified = [classify_test(t) for t in tests]
     by_req_tests: dict[str, list[dict]] = {r["id"]: [] for r in registry}
     for t, c in zip(tests, classified):
@@ -439,11 +631,9 @@ def build(repo: Path, registry: list[dict], tests: list[dict], impl: dict[str, l
                 "blocked_by": sorted({t["blocked_by"] for t in ts if t["blocked_by"]}),
                 "tests": ts,
             },
-            # NEVER derived. See the module docstring.
-            "proof": {"state": "not-derivable",
-                      "reason": "no committed, machine-readable record of a test run "
-                                "exists in the repo (_artifacts/ and results/ are "
-                                "git-ignored); DECISIONS-LOG.md prose is not a signal"},
+            # Derived ONLY from the committed ledger, and only as far as it reaches.
+            # With no ledger row this stays `not-derivable`, as it always was.
+            "proof": derive_proof(git, rid, ts, ev, latest),
             "status": LABELS[(impl_state, verify_state)],
         }
 
@@ -492,8 +682,19 @@ def build(repo: Path, registry: list[dict], tests: list[dict], impl: dict[str, l
             and v["verification"]["state"] == "executable"),
         "safety_critical_total": count(lambda v: v["safety_critical"]),
         "safety_critical_without_executable_l3": len(safety_scaffold),
-        "proven": 0,
-        "proven_derivable": False,
+        # PROVEN is now a real count — but only of requirements whose EVERY verifying
+        # test has a committed ledger row that saw its pass sentinel, at a sha the
+        # implementation has not moved past. `stale-proof` and `skipped` are counted
+        # separately and are NOT green.
+        "proven": count(lambda v: v["proof"]["state"] == "proven"),
+        "proof_stale": count(lambda v: v["proof"]["state"] == "stale-proof"),
+        "proof_skipped": count(lambda v: v["proof"]["state"] == "skipped"),
+        "proof_failed": count(lambda v: v["proof"]["state"] == "failed"),
+        "proof_unknown": count(lambda v: v["proof"]["state"] == "unknown"),
+        "proof_not_derivable": count(
+            lambda v: v["proof"]["state"] in ("not-derivable", "junit-skipped")),
+        "ledger_rows": len(ledger_rows),
+        "proven_derivable": bool(ledger_rows),
         "coverage_style_covered": count(lambda v: v["verification"]["state"] != "none"),
     }
     summary["uncited_by_any_reconciled_manifest"] = count(
@@ -552,16 +753,39 @@ def render_md(rep: dict, nodes: list[dict], advisory: dict | None) -> str:
     o.append(f"| Safety-critical requirements whose L3 test is a scaffold | "
              f"**{s['safety_critical_without_executable_l3']}** of "
              f"{s['safety_critical_total']} |")
-    o.append(f"| **PROVEN (a test actually passed)** | **{s['proven']} — NOT DERIVABLE** |")
-    o.append("")
-    o.append("> **Proof is deliberately not derived.** Nothing tracked in git records a "
-             "test result: `conformance/_artifacts/` and `results/` are git-ignored, and "
-             "the only record of a green run is DECISIONS-LOG.md prose — hand-maintained, "
-             "which is the very thing this report replaces. Per "
-             "`agents/definition-of-done.md` a requirement is done only when its tagged "
-             "test **passes**, so the strongest claim this report can make is "
-             "*wired and testable*. Closing the gap needs a committed, machine-readable "
-             "run ledger; until then, treat every row below as unproven.\n")
+    if s["proven_derivable"]:
+        o.append(f"| **PROVEN (every verifying test passed, evidenced)** | "
+                 f"**{s['proven']}** |")
+        o.append(f"| Proof exists but is STALE (code changed after the run) | "
+                 f"{s['proof_stale']} |")
+        o.append(f"| Verifying test SELF-SKIPPED green (not proof) | {s['proof_skipped']} |")
+        o.append(f"| Verifying test FAILED in the recorded run | {s['proof_failed']} |")
+        o.append(f"| Ran, but the log could not evidence pass vs self-skip | "
+                 f"{s['proof_unknown']} |")
+        o.append(f"| No committed ledger row yet | {s['proof_not_derivable']} |")
+        o.append("")
+        o.append(f"> **Proof comes from `conformance/runs/ledger.jsonl`** "
+                 f"({s['ledger_rows']} row(s)), written only by an explicit "
+                 f"`run.sh --record` / `lib/record_run.py` invocation. A row reaches "
+                 f"`proven` ONLY when the run log carried that test's own pass sentinel "
+                 f"token — the L2/L3 tests self-skip GREEN (Chainsaw records `passed` on "
+                 f"`DR_RESTORE_SKIPPED_OK` exactly as on a real run, and its JUnit carries "
+                 f"no stdout), so a skip token maps to `skipped` and can never become "
+                 f"proof. A proof is honoured only while the implementing manifests and "
+                 f"the test itself have not changed since the recorded `git_sha`; "
+                 f"otherwise it degrades to `stale-proof`, which is not green.\n")
+    else:
+        o.append(f"| **PROVEN (a test actually passed)** | **{s['proven']} — NOT DERIVABLE** |")
+        o.append("")
+        o.append("> **No proof is derivable: `conformance/runs/ledger.jsonl` is absent or "
+                 "empty.** The ledger is the committed, machine-readable run record; until "
+                 "a run is captured with `run.sh --record`, nothing tracked in git records "
+                 "a test result (`conformance/_artifacts/` and `results/` are git-ignored, "
+                 "and DECISIONS-LOG.md prose is hand-maintained — the very thing this "
+                 "report replaces). Per `agents/definition-of-done.md` a requirement is "
+                 "done only when its tagged test **passes**, so the strongest claim this "
+                 "report can make is *wired and testable*; treat every row below as "
+                 "unproven.\n")
     o.append(f"> For contrast, `coverage.md` counts **{s['coverage_style_covered']}** "
              f"requirements as covered — that count includes the "
              f"{s['verify_scaffold_only']} whose only verifying test is a TODO scaffold.\n")
@@ -612,7 +836,15 @@ def render_md(rep: dict, nodes: list[dict], advisory: dict | None) -> str:
             if ver["blocked_by"]:
                 vcell += f" · blocked-by: {'; '.join(ver['blocked_by'])}"
         sc = " ⚠safety" if v["safety_critical"] else ""
-        o.append(f"| {rid}{sc} | **{v['status']}** | {icell} | {vcell} | not-derivable |")
+        pr = v["proof"]
+        if pr["state"] == "not-derivable":
+            pcell = "not-derivable"
+        else:
+            runs = sorted({d["run_id"] for d in pr["per_test"] if d.get("run_id")})
+            pcell = f"**{pr['state']}**" if pr["state"] == "proven" else pr["state"]
+            if runs:
+                pcell += f" ({', '.join(runs)})"
+        o.append(f"| {rid}{sc} | **{v['status']}** | {icell} | {vcell} | {pcell} |")
 
     if rep["safety_critical_without_executable_l3"]:
         o.append("\n## Safety-critical requirements whose L3 fault test is a SCAFFOLD "
@@ -701,22 +933,76 @@ def render_md(rep: dict, nodes: list[dict], advisory: dict | None) -> str:
     o.append("| executable vs scaffold | TODO markers in the test body outrank the "
              "`executable` annotation; a real body without the annotation still counts "
              "and is flagged | conservative — ambiguity never upgrades |")
-    o.append("| **test actually passed** | **NOT DERIVED** — nothing in git records a "
-             "run result | refused |")
+    o.append("| **test actually passed** | the committed `runs/ledger.jsonl` row for "
+             "every verifying test: JUnit result **plus** that test's own pass sentinel "
+             "token grepped from the run log | exact where a run was recorded, refused "
+             "everywhere else — a self-skip token or a missing/unrecognised sentinel "
+             "NEVER yields `proven` |")
+    o.append("| proof still current | the row's `git_sha` must be a descendant of the "
+             "last commit touching the requirement's implementing manifests or its test "
+             "| conservative — an unresolvable or `-dirty` sha degrades to `stale-proof` |")
     o.append("| cluster liveness (pods/CRs healthy) | **NOT DERIVED** — no cluster is "
              "contacted; `reconciled` means Flux *would* apply it, not that it is "
              "healthy | refused |")
     o.append("| phase/board status | **NOT DERIVED** — `agents/task-board.md` is stale "
              "and is not a signal | refused |")
 
+    o.append("\n## Run ledger — the committed proof-of-pass evidence\n")
+    if not s["proven_derivable"]:
+        o.append("- `conformance/runs/ledger.jsonl` holds no rows. Capture a run with "
+                 "`./run.sh --record` (recording is never implicit: a run that silently "
+                 "records itself is how a bad run becomes a permanent false proof), then "
+                 "commit `conformance/runs/<run-id>/` **with its `run.log`** and the "
+                 "ledger. The log is the load-bearing half — Chainsaw's JUnit carries no "
+                 "stdout, so without it a self-skip is indistinguishable from a pass.")
+    else:
+        o.append(f"- {s['ledger_rows']} row(s) in `conformance/runs/ledger.jsonl`. "
+                 f"Per-test evidence for every non-`not-derivable` requirement below; "
+                 f"full rows (env, chainsaw/kube versions, sentinel, note) are in "
+                 f"`status.json` under `by_requirement.<R-ID>.proof.per_test`.\n")
+        o.append("| Requirement | Proof | Test | Ledger state | Sentinel | Run |")
+        o.append("|---|---|---|---|---|---|")
+        for rid, v in rep["by_requirement"].items():
+            pr = v["proof"]
+            if pr["state"] == "not-derivable":
+                continue
+            for d in pr["per_test"]:
+                o.append(f"| {rid} | {pr['state']} | `{d['test']}` | {d['state']} | "
+                         f"`{d.get('sentinel') or '—'}` | {d.get('run_id') or '—'} |")
+        stale = [(rid, v) for rid, v in rep["by_requirement"].items()
+                 if v["proof"]["state"] == "stale-proof"]
+        if stale:
+            o.append("\n### Stale proofs — a real pass that no longer describes this tree\n")
+            o.append("These requirements DID pass, but their implementing manifests or "
+                     "their verifying test changed in a commit the recorded run predates. "
+                     "A stale proof is not green; re-run with `--record`.\n")
+            for rid, v in stale:
+                pr = v["proof"]
+                o.append(f"- **{rid}** — {pr['reason']}")
+        skipped = [(rid, v) for rid, v in rep["by_requirement"].items()
+                   if v["proof"]["state"] == "skipped"]
+        if skipped:
+            o.append("\n### SELF-SKIPPED green — recorded, and deliberately NOT proof\n")
+            o.append("Chainsaw reported `passed` for these, because the test exited 0 "
+                     "after emitting its skip token: a precondition (Longhorn "
+                     "StorageClass, Velero CRDs, >=3 Ready nodes) was absent, so the "
+                     "behaviour was never exercised. This is exactly the row a "
+                     "JUnit-only ledger would have recorded as green.\n")
+            for rid, v in skipped:
+                toks = ", ".join(sorted({d.get("sentinel") or "?"
+                                         for d in v["proof"]["per_test"]
+                                         if d["state"] == "skipped"}))
+                o.append(f"- **{rid}** — skip token(s): `{toks}`")
+
     o.append("\n## Advisory — untracked local run artifact (NOT counted)\n")
     if advisory:
         o.append(f"- `{advisory['path']}` (untracked, git-ignored), last written "
                  f"{advisory['mtime']}: {advisory['tests']} testcase(s), "
                  f"{advisory['failures']} failure(s), {advisory['skipped']} skipped.")
         o.append(f"- requirement IDs it names: {', '.join(advisory['requirements']) or '—'}")
-        o.append("- This is one developer's local workspace, not repo state. It is shown "
-                 "for orientation only and contributes to NO status above.")
+        o.append("- This is one developer's local workspace, not repo state, and it is NOT "
+                 "the ledger. It is shown for orientation only and contributes to NO "
+                 "status above — a JUnit alone cannot tell a self-skip from a pass.")
     else:
         o.append("- none present.")
     return "\n".join(o) + "\n"
@@ -841,6 +1127,122 @@ def _selftest() -> int:
               classify_test({"name": "s", "path": str(f), "layer": "L2"})["state"]
               == "scaffold")
 
+    # ---------------------------------------------------------------- PROOF / ledger
+    # These are the assertions that stand between this report and a fake green.
+    check("empty ledger parses to no rows (pre-ledger behaviour is preserved)",
+          read_ledger(Path("/nonexistent/ledger.jsonl")) == [])
+
+    def row(**kw):
+        base = {"ts_utc": "2026-09-01T12:00:00Z", "git_sha": "deadbeef", "env": "dev",
+                "chainsaw_version": "v0.2.12", "kube_version": "v1.36.4", "layer": "L3",
+                "test": "dr-restore", "requirements": ["R-STATE-03"],
+                "junit_result": "passed", "sentinel": None, "proof": "skipped",
+                "run_id": "20260901T120000Z-deadbee", "note": ""}
+        base.update(kw)
+        return base
+
+    verifiers = [{"name": "dr-restore",
+                  "path": "conformance/tests/l3-fault-injection/dr-restore/"
+                          "chainsaw-test.yaml"}]
+
+    with tempfile.TemporaryDirectory() as td:
+        gr = Path(td)
+        env = {**os.environ, "GIT_AUTHOR_NAME": "t", "GIT_AUTHOR_EMAIL": "t@t",
+               "GIT_COMMITTER_NAME": "t", "GIT_COMMITTER_EMAIL": "t@t"}
+
+        def git(*a):
+            return subprocess.run(["git", "-C", str(gr), *a], capture_output=True,
+                                  text=True, env=env)
+
+        git("init", "-q", "-b", "main")
+        (gr / "platform").mkdir()
+        (gr / "platform" / "velero.yaml").write_text("kind: X  # R-STATE-03\n")
+        git("add", "-A"); git("commit", "-qm", "one")
+        sha_a = git("rev-parse", "HEAD").stdout.strip()
+        (gr / "platform" / "velero.yaml").write_text("kind: X  # R-STATE-03 v2\n")
+        git("add", "-A"); git("commit", "-qm", "two")
+        sha_b = git("rev-parse", "HEAD").stdout.strip()
+
+        oracle = _GitOracle(gr)
+        impl = [{"path": "platform/velero.yaml"}]
+
+        # *** THE CASE THIS WHOLE FEATURE EXISTS FOR ***
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="skipped", junit_result="passed",
+                                              sentinel="DR_RESTORE_SKIPPED_OK",
+                                              git_sha=sha_b)]))
+        check("a SELF-SKIP row on a GREEN JUnit is 'skipped', NEVER 'proven'",
+              pr["state"] == "skipped")
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="proven", git_sha=sha_b,
+                                              sentinel="DR_RESTORED_OK")]))
+        check("a proven row at the CURRENT sha is honoured", pr["state"] == "proven")
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="proven", git_sha=sha_a,
+                                              sentinel="DR_RESTORED_OK")]))
+        check("STALENESS: proven at a sha the implementation has moved past degrades "
+              "to stale-proof", pr["state"] == "stale-proof")
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="proven", git_sha=f"{sha_b}-dirty",
+                                              sentinel="DR_RESTORED_OK")]))
+        check("a run recorded from a DIRTY tree is never honoured as proof",
+              pr["state"] == "stale-proof")
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="proven", git_sha="0" * 40)]))
+        check("a git_sha this clone cannot resolve degrades, never upgrades",
+              pr["state"] == "stale-proof")
+
+        for bad, expect in (("failed", "failed"),
+                            ("junit-skipped", "junit-skipped"),
+                            ("unknown-sentinel-absent", "unknown"),
+                            ("unknown-no-sentinel-declared", "unknown"),
+                            ("something-new-from-the-future", "unknown")):
+            pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                              latest_by_test([row(proof=bad, git_sha=sha_b)]))
+            check(f"ledger state {bad!r} maps to {expect!r}, never to proven",
+                  pr["state"] == expect)
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl, {})
+        check("no ledger row at all stays not-derivable",
+              pr["state"] == "not-derivable")
+
+        # Two verifying tests, only one proven: the requirement must NOT read proven.
+        two = verifiers + [{"name": "data-survival",
+                            "path": "conformance/tests/l3-fault-injection/"
+                                    "data-survival/chainsaw-test.yaml"}]
+        pr = derive_proof(oracle, "R-STATE-03", two, impl,
+                          latest_by_test([row(proof="proven", git_sha=sha_b)]))
+        check("a requirement is proven only when EVERY verifying test is",
+              pr["state"] == "not-derivable")
+        pr = derive_proof(oracle, "R-STATE-03", two, impl,
+                          latest_by_test([row(proof="proven", git_sha=sha_b),
+                                          row(test="data-survival", proof="skipped",
+                                              git_sha=sha_b)]))
+        check("worst-of wins across verifying tests (skip drags proven down)",
+              pr["state"] == "skipped")
+
+        # Latest row wins, not best-ever: a test that regressed to self-skipping must
+        # stop reading as proven.
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(ts_utc="2026-09-01T10:00:00Z",
+                                              proof="proven", git_sha=sha_b),
+                                          row(ts_utc="2026-09-02T10:00:00Z",
+                                              proof="skipped", git_sha=sha_b)]))
+        check("the LATEST ledger row wins, not the best one ever recorded",
+              pr["state"] == "skipped")
+
+        # A malformed ledger line is skipped, never guessed at.
+        lf = gr / "ledger.jsonl"
+        lf.write_text('{"test":"a","proof":"proven"}\nnot json at all\n\n'
+                      '{"proof":"proven"}\n')
+        rows = read_ledger(lf)
+        check("malformed / test-less ledger lines are dropped, not guessed at",
+              len(rows) == 1 and rows[0]["test"] == "a")
+
     if not ok:
         return 1
     sys.stderr.write("status.py selftest: PASS\n")
@@ -865,6 +1267,10 @@ def main() -> int:
                     help="exit 1 on defects this tool owns: registry/spec drift, "
                          "executable-annotation conflicts, or a safety-critical "
                          "requirement whose only L3 test is a scaffold")
+    ap.add_argument("--ledger", type=Path, default=DEFAULT_LEDGER,
+                    help=f"committed proof-of-pass ledger written by lib/record_run.py "
+                         f"(default {DEFAULT_LEDGER}). Absent or empty => every "
+                         f"requirement stays `not-derivable`, as before the ledger existed")
     ap.add_argument("--selftest", action="store_true", help="run the built-in self-test")
     args = ap.parse_args()
 
@@ -895,7 +1301,12 @@ def main() -> int:
     applied, nodes = reconciled_files(repo, entry)
     gitops_roots = {n["resolved"].split("/", 1)[0] for n in nodes if n["exists"]}
     impl = scan_implementation(repo, tracked_files(repo))
-    rep = build(repo, registry, tests, impl, applied, gitops_roots, spec_ids, args.env)
+    ledger_rows = read_ledger(args.ledger)
+    rep = build(repo, registry, tests, impl, applied, gitops_roots, spec_ids, args.env,
+                ledger_rows)
+    rep["ledger"] = {"path": os.path.relpath(args.ledger, REPO_ROOT),
+                     "rows": len(ledger_rows),
+                     "present": args.ledger.is_file()}
     rep["flux_graph"] = nodes
     rep["gitops_roots"] = sorted(gitops_roots)
     rep["reconciled_file_count"] = len(applied)
@@ -915,7 +1326,11 @@ def main() -> int:
           f"(+{s['wired_or_partial_and_testable'] - s['wired_and_testable']} partial) | "
           f"scaffold-only {s['verify_scaffold_only']} | "
           f"safety-critical w/o executable L3 "
-          f"{s['safety_critical_without_executable_l3']} | PROVEN: not derivable")
+          f"{s['safety_critical_without_executable_l3']} | "
+          + (f"PROVEN: {s['proven']} (stale {s['proof_stale']}, self-skipped "
+             f"{s['proof_skipped']}, failed {s['proof_failed']}, unknown "
+             f"{s['proof_unknown']}) from {s['ledger_rows']} ledger row(s)"
+             if s["proven_derivable"] else "PROVEN: not derivable (empty run ledger)"))
     print(f"[status] wrote {args.out/'status.md'} and {args.out/'status.json'}")
 
     rc = 0

conformance/run.sh

@@ -14,12 +14,33 @@
 #   ./run.sh --status                 # DERIVED STATUS report only (no cluster): per
 #                                     #   requirement, is it implemented, is it actually
 #                                     #   reconciled by Flux, is its test executable or a
-#                                     #   scaffold. Proof-of-pass is deliberately NOT
-#                                     #   derived — see lib/status.py.
+#                                     #   scaffold, and whether the committed run ledger
+#                                     #   (runs/ledger.jsonl) actually proves it — see
+#                                     #   lib/status.py. No ledger row => not-derivable.
 #   ./run.sh --lint                   # structural-validate test defs (no cluster)
 #   ./run.sh --strict-coverage        # hygiene gate: fail on tag/annotation drift
 #   ./run.sh --requirements R-NET-01  # ALSO asserts those IDs are covered (merge gate)
 #   ./run.sh --require-all            # phase-exit: every requirement must be covered
+#   ./run.sh --record                 # RUN AND CAPTURE: tee the whole run to
+#                                     #   runs/<UTC>-<short-sha>/run.log, copy the JUnit
+#                                     #   beside it, and append one ledger row per
+#                                     #   testcase to runs/ledger.jsonl (lib/record_run.py)
+#
+# --record — PROOF-OF-PASS, CAPTURED AT RUN TIME (why it is a separate flag)
+# --------------------------------------------------------------------------
+# Without it, nothing about a green run ever reaches repo state: _artifacts/ is gitignored
+# and the root .gitignore kills *.junit.xml globally, which is why `--status` reports
+# PROVEN 0 for all 51 requirements. `--record` writes the one tracked thing that fixes
+# that — `conformance/runs/` (see conformance/.gitignore for the negations).
+#
+# RECORDING IS DELIBERATELY EXPLICIT. A run that silently records itself is how a bad run
+# becomes a permanent false proof, so the plain `./run.sh` writes no ledger row at all.
+#
+# BOTH FILES ARE KEPT, and the LOG is the load-bearing one. The L2/L3 tests self-skip
+# GREEN: when a precondition is missing they echo e.g. `DR_RESTORE_SKIPPED_OK` and exit 0,
+# and Chainsaw records `passed` exactly as on a real run. Chainsaw's JUnit carries no
+# stdout, so the sentinel token in run.log is the ONLY thing that separates proven from
+# skipped. A JUnit committed on its own would record a skip as proof of R-STATE-03.
 #
 # Artifacts (always written under conformance/_artifacts/, gitignored):
 #   _artifacts/report.junit.xml        JUnit (Chainsaw output, or skipped-scaffold shim)
@@ -28,6 +49,11 @@
 #   _artifacts/status/status.md        human requirement-status report (--status)
 #   _artifacts/status/status.json      machine requirement-status report (--status)
 #
+# Run ledger (TRACKED — commit these; --record only):
+#   runs/<UTC>-<short-sha>/run.log            full tee'd run output (carries the sentinels)
+#   runs/<UTC>-<short-sha>/report.junit.xml   the JUnit for that same run
+#   runs/ledger.jsonl                         append-only, one row per testcase per run
+#
 # Phase 0: no cluster exists. The behavior tests are valid scaffolds that cannot
 # execute yet, so run.sh emits a *skipped* JUnit and a coverage report, and exits
 # green — the harness is proven reproducible while later phases fill in behavior.
@@ -47,12 +73,17 @@ STATUS_OUT="${ARTIFACTS}/status"
 JUNIT_OUT="${ARTIFACTS}/report.junit.xml"
 PYTHON="${PYTHON:-python3}"
 
+# Every argument as given, so `--record` can re-exec this script unchanged (minus itself)
+# under `tee`. Captured BEFORE parsing so nothing is normalized away.
+ORIG_ARGS=("$@")
+
 LAYER="all"
 REQS=""
 MODE="run"          # run | coverage-only | status | lint
 STRICT_COVERAGE=0
 REQUIRE_ALL=0
 FORCE_NO_CLUSTER=0
+RECORD=0
 
 # Documented, out-of-scope coverage gaps exempt from the completeness gate: requirements
 # owned by another workstream that WS-TEST does not yet scaffold. Listed here so the
@@ -83,7 +114,9 @@ FORCE_NO_CLUSTER=0
 # longer a gap and has been removed from this list; the coverage report counts it as covered.
 DOCUMENTED_GAPS=""
 
-usage() { sed -n '2,40p' "${BASH_SOURCE[0]}" | sed 's/^# \{0,1\}//'; }
+# Print the header block (line 2 through the closing `####` rule, which is dropped) as
+# help. Bounded by the rule rather than a fixed line number so the header can grow.
+usage() { sed -n '2,/^#####/p' "${BASH_SOURCE[0]}" | sed '$d' | sed 's/^# \{0,1\}//'; }
 
 while [ $# -gt 0 ]; do
   case "$1" in
@@ -95,6 +128,7 @@ while [ $# -gt 0 ]; do
     --strict-coverage) STRICT_COVERAGE=1; shift ;;
     --require-all)    REQUIRE_ALL=1; shift ;;
     --no-cluster)     FORCE_NO_CLUSTER=1; shift ;;
+    --record)         RECORD=1; shift ;;
     -h|--help)        usage; exit 0 ;;
     *) echo "unknown arg: $1" >&2; usage; exit 2 ;;
   esac
@@ -104,6 +138,62 @@ mkdir -p "${ARTIFACTS}" "${COVERAGE_OUT}" "${STATUS_OUT}"
 
 log() { printf '\033[1m[run.sh]\033[0m %s\n' "$*"; }
 
+###############################################################################
+# --record: capture this run as committed evidence, then hand it to the ledger.
+#
+# Implemented as a ONE-LEVEL re-exec of this same script under `tee`, so the run itself is
+# byte-for-byte the ordinary run (same code path, same artifacts) and the log is the exact
+# operator-visible output — no second, differently-behaving "recording mode" to drift.
+# CONF_RECORD_CHILD guards against recursion.
+#
+# The recorder runs REGARDLESS of the run's exit status: a red run must be recorded as red
+# (that is evidence too), and run.sh still exits with the child's real rc, so no gate is
+# softened by recording. `${PIPESTATUS[0]}` is what carries that rc past `tee`.
+###############################################################################
+if [ "${RECORD}" = 1 ] && [ -z "${CONF_RECORD_CHILD:-}" ]; then
+  case "${MODE}" in
+    run) ;;
+    # --record is about EVIDENCE OF A RUN. --coverage-only/--status/--lint execute no
+    # test, so a ledger row from one of them would be a row about nothing.
+    *) echo "--record captures a TEST RUN; --${MODE} executes none." >&2; exit 2 ;;
+  esac
+  RUN_SHA="$(git -C "${CONF_ROOT}" rev-parse --short HEAD 2>/dev/null || echo nogit)"
+  RUN_ID="$(date -u +%Y%m%dT%H%M%SZ)-${RUN_SHA}"
+  RUN_DIR="${CONF_ROOT}/runs/${RUN_ID}"
+  mkdir -p "${RUN_DIR}"
+  # Drop any JUnit left behind by a PREVIOUS run before starting, so this run dir can only
+  # ever capture a report THIS run produced. Copying a stale artifact would pair someone
+  # else's result with this run's log — a fabricated pairing, which is precisely the class
+  # of false proof the ledger exists to prevent.
+  rm -f "${JUNIT_OUT}"
+  # Strip --record from the argv handed to the child; everything else passes through.
+  CHILD_ARGS=()
+  for a in ${ORIG_ARGS[@]+"${ORIG_ARGS[@]}"}; do
+    [ "$a" = "--record" ] || CHILD_ARGS+=("$a")
+  done
+  log "RECORD: capturing this run to runs/${RUN_ID}/ (run.log + report.junit.xml)"
+  set +e
+  CONF_RECORD_CHILD=1 "${BASH_SOURCE[0]}" ${CHILD_ARGS[@]+"${CHILD_ARGS[@]}"} 2>&1 \
+    | tee "${RUN_DIR}/run.log"
+  RUN_RC=${PIPESTATUS[0]}
+  set -e
+  if [ -f "${JUNIT_OUT}" ]; then
+    cp "${JUNIT_OUT}" "${RUN_DIR}/report.junit.xml"
+  else
+    log "RECORD: no ${JUNIT_OUT} was produced — the ledger step will SKIP (never green)."
+  fi
+  # Explicit, separate step: read the JUnit + the log and append one row per testcase.
+  # rc 3 = inputs absent (nothing recorded, not green); it must not mask the run's own rc.
+  # CONF_LEDGER exists so the harness's own tests can exercise this path without writing
+  # to the real ledger; operators should never set it.
+  "${PYTHON}" "${CONF_ROOT}/lib/record_run.py" \
+    --run-dir "${RUN_DIR}" --env "${CONF_ENV:-dev}" \
+    --ledger "${CONF_LEDGER:-${CONF_ROOT}/runs/ledger.jsonl}" || true
+  log "RECORD: run rc=${RUN_RC}. Commit conformance/runs/${RUN_ID}/ WITH its run.log and"
+  log "RECORD: conformance/runs/ledger.jsonl — an uncommitted ledger proves nothing."
+  exit "${RUN_RC}"
+fi
+
 # --- Coverage report is always produced (cluster-independent, R-TEST-04) --------------
 gen_coverage() {
   # Pass --allow-gap only when there IS an exemption: an empty DOCUMENTED_GAPS means no

conformance/runs/20260901T235117Z-e9a4b66/report.junit.xml

@@ -0,0 +1,4 @@
+<testsuites name="chainsaw-report" tests="1" failures="0" errors="0" time="0.000000"><testsuite name="/work/conformance/tests/l3-fault-injection/node-loss" tests="1" failures="0" errors="0" id="0" time="">
+    <testcase name="node-loss" classname="" time="131.090121" />
+  </testsuite>
+</testsuites>

conformance/runs/20260901T235117Z-e9a4b66/run.log

@@ -0,0 +1,232 @@
+[run.sh] Coverage report first (always)
+[coverage] 42/51 requirements have a scaffolded test (82.4%); 9 gap(s), 0 safety-critical gap(s).
+[coverage] wrote /work/conformance/_artifacts/coverage/coverage.md and /work/conformance/_artifacts/coverage/coverage.json
+[run.sh] No L0/L1 offline checks match the selection (layer=l3 reqs='R-STATE-02').
+[run.sh] LIGHT pass: no tests selected.
+[run.sh] HEAVY pass: 1 test(s) SERIAL (parallel=1) — node-loss
+Version: 0.2.12
+Loading config (/work/conformance/config/chainsaw-config.yaml)...
+- Using test file: chainsaw-test
+- TestDirs [/work/conformance/tests/l3-fault-injection/node-loss]
+- SkipDelete false
+- FailFast false
+- ReportFormat 'JUNIT-TEST'
+- ReportName 'chainsaw-report-heavy'
+- ReportPath '/work/conformance/_artifacts'
+- Namespace ''
+- FullName false
+- IncludeTestRegex ''
+- ExcludeTestRegex ''
+- ApplyTimeout 1m30s
+- AssertTimeout 3m0s
+- CleanupTimeout 2m0s
+- DeleteTimeout 2m0s
+- ErrorTimeout 1m0s
+- ExecTimeout 3m0s
+- DeletionPropagationPolicy Background
+- Parallel 1
+- Template true
+- NoCluster false
+- PauseOnFailure false
+Loading tests...
+- node-loss (/work/conformance/tests/l3-fault-injection/node-loss)
+Loading values...
+Running tests...
+=== RUN   chainsaw
+=== PAUSE chainsaw
+=== CONT  chainsaw
+=== RUN   chainsaw/node-loss
+=== PAUSE chainsaw/node-loss
+=== CONT  chainsaw/node-loss
+    l.go:52: | 23:51:18 | node-loss | @chainsaw                               | CREATE    | OK    | v1/Namespace @ chainsaw-fond-marlin
+    l.go:52: | 23:51:18 | node-loss | volume-stays-available-across-node-loss | TRY       | BEGIN |
+    l.go:52: | 23:51:18 | node-loss | volume-stays-available-across-node-loss | CMD       | RUN   |
+        === COMMAND
+        /usr/bin/sh -c set -euo pipefail
+        NS="$NAMESPACE"
+        
+        # -- Gate 1: skip cleanly (green) if the longhorn tier is not present yet. --
+        if ! kubectl get storageclass longhorn >/dev/null 2>&1; then
+          echo "SKIP: 'longhorn' StorageClass absent — node-loss not applicable on this cluster yet"
+          echo NODE_LOSS_SKIPPED_OK
+          exit 0
+        fi
+        
+        # -- Gate 2: a 3-replica volume + single-node-loss headroom needs >= 3 Ready nodes. --
+        READY="$(kubectl get nodes \
+          -o jsonpath='{range .items[*]}{.status.conditions[?(@.type=="Ready")].status}{"\n"}{end}' \
+          | grep -c '^True$' || true)"
+        echo "ready nodes: ${READY}"
+        if [ "${READY:-0}" -lt 3 ]; then
+          echo "SKIP: only ${READY:-0} Ready node(s) (<3) — node-loss resilience not meaningful yet"
+          echo NODE_LOSS_SKIPPED_OK
+          exit 0
+        fi
+        
+        CANARY="node-loss-canary-$(date +%s%N)"
+        
+        # -- GIVEN: a Longhorn PVC (platform default SC = 3 replicas across nodes) + a
+        #    writer pod that writes the canary and flushes it to the replicated volume. --
+        kubectl -n "$NS" apply -f - <<EOF
+        apiVersion: v1
+        kind: PersistentVolumeClaim
+        metadata:
+          name: survivor
+        spec:
+          accessModes: [ReadWriteOnce]
+          storageClassName: longhorn
+          resources:
+            requests:
+              storage: 1Gi
+        EOF
+        
+        apply_pod() {
+          kubectl -n "$NS" apply -f - <<EOF
+        apiVersion: v1
+        kind: Pod
+        metadata:
+          name: $1
+        spec:
+          restartPolicy: Never
+          containers:
+            - name: app
+              image: busybox:1.36.1
+              command: ["sh", "-c", "sleep 3600"]
+              volumeMounts:
+                - name: data
+                  mountPath: /data
+          volumes:
+            - name: data
+              persistentVolumeClaim:
+                claimName: survivor
+        EOF
+        }
+        
+        apply_pod writer
+        kubectl -n "$NS" wait --for=condition=Ready pod/writer --timeout=240s
+        printf '%s' "$CANARY" | kubectl -n "$NS" exec -i writer -- sh -c 'cat > /data/canary && sync'
+        echo "wrote canary: $(kubectl -n "$NS" exec writer -- cat /data/canary)"
+        
+        # The victim node is the one the attached volume currently lives on.
+        VICTIM="$(kubectl -n "$NS" get pod writer -o jsonpath='{.spec.nodeName}')"
+        [ -n "$VICTIM" ] || { echo "FAIL: could not determine writer's node" >&2; exit 1; }
+        echo "victim node (currently hosts the attached volume): $VICTIM"
+        
+        # Best-effort precondition log: if the Longhorn Volume CR is readable, show the
+        # volume is genuinely 3-replica/healthy before we take a node. Non-fatal (the
+        # runner is least-privilege and may not have longhorn.io read rights) — the
+        # data-availability assertion below is the authoritative proof, not this.
+        PVNAME="$(kubectl -n "$NS" get pvc survivor -o jsonpath='{.spec.volumeName}' 2>/dev/null || true)"
+        if [ -n "$PVNAME" ]; then
+          kubectl -n longhorn-system get volumes.longhorn.io "$PVNAME" \
+            -o jsonpath='pre-fault robustness={.status.robustness} replicas={.spec.numberOfReplicas}{"\n"}' \
+            2>/dev/null || echo "(Longhorn Volume CR not readable — continuing; data read is the proof)"
+        fi
+        
+        # -- WHEN: FAULT INJECTION — remove the victim node FROM SERVICE. --
+        #    Label it with THIS test's unique namespace so `finally` can always find and
+        #    uncordon exactly this node; then cordon it; then evict ONLY our own writer
+        #    pod, forcing the volume to detach from the victim. (No `drain` — unrelated
+        #    pods on the node are never touched.)
+        kubectl label node "$VICTIM" "conformance.home.k3s/cordoned-by=$NS" --overwrite
+        kubectl cordon "$VICTIM"
+        echo "cordoned + labelled victim node: $VICTIM"
+        kubectl -n "$NS" delete pod writer --wait=true --timeout=240s
+        echo "evicted writer off the victim node; volume detached from $VICTIM"
+        
+        # -- THEN: a fresh workload re-binds the SAME volume. The victim is unschedulable,
+        #    so the scheduler MUST place the reader on a SURVIVING node; Longhorn re-attaches
+        #    the volume there from its replicas on the other nodes. --
+        apply_pod reader
+        kubectl -n "$NS" wait --for=condition=Ready pod/reader --timeout=360s
+        READER_NODE="$(kubectl -n "$NS" get pod reader -o jsonpath='{.spec.nodeName}')"
+        echo "reader scheduled on surviving node: $READER_NODE (victim was $VICTIM)"
+        if [ "$READER_NODE" = "$VICTIM" ]; then
+          echo "FAIL: reader landed back on the cordoned victim node — node was not removed from service" >&2
+          exit 1
+        fi
+        
+        GOT="$(kubectl -n "$NS" exec reader -- cat /data/canary)"
+        echo "recovered='$GOT' expected='$CANARY'"
+        [ "$GOT" = "$CANARY" ] || { echo "FAIL: data not available after node loss" >&2; exit 1; }
+        echo "volume available + data intact from a surviving node"
+        
+        # Best-effort reconvergence log: if the Longhorn Volume CR is readable, wait
+        # (bounded) for robustness to settle back to available (healthy|degraded — both
+        # serve I/O; a healthy 3-replica volume rebuilds a replica once headroom exists).
+        # Non-fatal for the same least-privilege reason as the pre-fault log.
+        if [ -n "$PVNAME" ]; then
+          for i in $(seq 1 30); do
+            ROB="$(kubectl -n longhorn-system get volumes.longhorn.io "$PVNAME" \
+                  -o jsonpath='{.status.robustness}' 2>/dev/null || true)"
+            [ -z "$ROB" ] && { echo "(Longhorn Volume CR not readable — skipping reconvergence log)"; break; }
+            echo "post-fault robustness[$i]=$ROB"
+            case "$ROB" in healthy|degraded) break ;; esac
+            sleep 10
+          done
+        fi
+        
+        echo NODE_LOSS_VOLUME_AVAILABLE_OK
+    l.go:52: | 23:52:42 | node-loss | volume-stays-available-across-node-loss | SCRIPT    | LOG   |
+        === STDOUT
+        ready nodes: 3
+        persistentvolumeclaim/survivor created
+        pod/writer created
+        pod/writer condition met
+        wrote canary: node-loss-canary-1788306678898809444
+        victim node (currently hosts the attached volume): k3s-dev-2
+        pre-fault robustness=healthy replicas=3
+        node/k3s-dev-2 labeled
+        node/k3s-dev-2 cordoned
+        cordoned + labelled victim node: k3s-dev-2
+        pod "writer" deleted from chainsaw-fond-marlin namespace
+        evicted writer off the victim node; volume detached from k3s-dev-2
+        pod/reader created
+        pod/reader condition met
+        reader scheduled on surviving node: k3s-dev-1 (victim was k3s-dev-2)
+        recovered='node-loss-canary-1788306678898809444' expected='node-loss-canary-1788306678898809444'
+        volume available + data intact from a surviving node
+        post-fault robustness[1]=healthy
+        NODE_LOSS_VOLUME_AVAILABLE_OK
+    l.go:52: | 23:52:42 | node-loss | volume-stays-available-across-node-loss | SCRIPT    | DONE  |
+    l.go:52: | 23:52:42 | node-loss | volume-stays-available-across-node-loss | TRY       | END   |
+    l.go:52: | 23:52:42 | node-loss | volume-stays-available-across-node-loss | FINALLY   | BEGIN |
+    l.go:52: | 23:52:42 | node-loss | volume-stays-available-across-node-loss | CMD       | RUN   |
+        === COMMAND
+        /usr/bin/sh -c set -uo pipefail
+        for n in $(kubectl get nodes -l "conformance.home.k3s/cordoned-by=$NAMESPACE" -o name 2>/dev/null); do
+          kubectl uncordon "${n#node/}" || true
+          kubectl label "$n" "conformance.home.k3s/cordoned-by-" || true
+          echo "restored node to service: ${n#node/}"
+        done
+    l.go:52: | 23:52:43 | node-loss | volume-stays-available-across-node-loss | SCRIPT    | LOG   |
+        === STDOUT
+        node/k3s-dev-2 uncordoned
+        node/k3s-dev-2 unlabeled
+        restored node to service: k3s-dev-2
+    l.go:52: | 23:52:43 | node-loss | volume-stays-available-across-node-loss | SCRIPT    | DONE  |
+    l.go:52: | 23:52:43 | node-loss | volume-stays-available-across-node-loss | CMD       | RUN   |
+        === COMMAND
+        /usr/bin/sh -c kubectl -n "$NAMESPACE" delete pod writer reader --ignore-not-found --wait=false || true
+        kubectl -n "$NAMESPACE" delete pvc survivor --ignore-not-found --wait=false || true
+        echo "cleanup best-effort; chainsaw namespace teardown finalizes"
+    l.go:52: | 23:52:43 | node-loss | volume-stays-available-across-node-loss | SCRIPT    | LOG   |
+        === STDOUT
+        pod "reader" deleted from chainsaw-fond-marlin namespace
+        persistentvolumeclaim "survivor" deleted from chainsaw-fond-marlin namespace
+        cleanup best-effort; chainsaw namespace teardown finalizes
+    l.go:52: | 23:52:43 | node-loss | volume-stays-available-across-node-loss | SCRIPT    | DONE  |
+    l.go:52: | 23:52:43 | node-loss | volume-stays-available-across-node-loss | FINALLY   | END   |
+    l.go:52: | 23:52:43 | node-loss | @chainsaw                               | CLEANUP   | BEGIN |
+    l.go:52: | 23:52:43 | node-loss | @chainsaw                               | DELETE    | OK    | v1/Namespace @ chainsaw-fond-marlin
+    l.go:52: | 23:53:29 | node-loss | @chainsaw                               | CLEANUP   | END   |
+--- PASS: chainsaw (0.00s)
+    --- PASS: chainsaw/node-loss (131.09s)
+PASS
+Tests Summary...
+- Passed  tests 1
+- Failed  tests 0
+- Skipped tests 0
+Done.
+merge_junit: merged 1 report(s) -> /work/conformance/_artifacts/report.junit.xml (tests=1 failures=0 errors=0 skipped=0)
+[run.sh] Done. JUnit: /work/conformance/_artifacts/report.junit.xml | Coverage: /work/conformance/_artifacts/coverage/coverage.md

conformance/runs/20260902T001907Z-fdc3265/report.junit.xml

@@ -0,0 +1,4 @@
+<testsuites name="chainsaw-report" tests="1" failures="0" errors="0" time="0.000000"><testsuite name="/work/conformance/tests/l3-fault-injection/dr-restore" tests="1" failures="0" errors="0" id="0" time="">
+    <testcase name="dr-restore" classname="" time="149.053701" />
+  </testsuite>
+</testsuites>

conformance/runs/20260902T001907Z-fdc3265/run.log

@@ -0,0 +1,671 @@
+[run.sh] Coverage report first (always)
+[coverage] 42/51 requirements have a scaffolded test (82.4%); 9 gap(s), 0 safety-critical gap(s).
+[coverage] wrote /work/conformance/_artifacts/coverage/coverage.md and /work/conformance/_artifacts/coverage/coverage.json
+[run.sh] No L0/L1 offline checks match the selection (layer=l3 reqs='R-STATE-03').
+[run.sh] LIGHT pass: no tests selected.
+[run.sh] HEAVY pass: 1 test(s) SERIAL (parallel=1) — dr-restore
+Version: 0.2.12
+Loading config (/work/conformance/config/chainsaw-config.yaml)...
+- Using test file: chainsaw-test
+- TestDirs [/work/conformance/tests/l3-fault-injection/dr-restore]
+- SkipDelete false
+- FailFast false
+- ReportFormat 'JUNIT-TEST'
+- ReportName 'chainsaw-report-heavy'
+- ReportPath '/work/conformance/_artifacts'
+- Namespace ''
+- FullName false
+- IncludeTestRegex ''
+- ExcludeTestRegex ''
+- ApplyTimeout 1m30s
+- AssertTimeout 3m0s
+- CleanupTimeout 2m0s
+- DeleteTimeout 2m0s
+- ErrorTimeout 1m0s
+- ExecTimeout 3m0s
+- DeletionPropagationPolicy Background
+- Parallel 1
+- Template true
+- NoCluster false
+- PauseOnFailure false
+Loading tests...
+- dr-restore (/work/conformance/tests/l3-fault-injection/dr-restore)
+Loading values...
+Running tests...
+=== RUN   chainsaw
+=== PAUSE chainsaw
+=== CONT  chainsaw
+=== RUN   chainsaw/dr-restore
+=== PAUSE chainsaw/dr-restore
+=== CONT  chainsaw/dr-restore
+    l.go:52: | 00:19:07 | dr-restore | @chainsaw                                 | CREATE    | OK    | v1/Namespace @ chainsaw-cunning-hen
+    l.go:52: | 00:19:07 | dr-restore | assert-backup-target-is-off-cluster       | TRY       | BEGIN |
+    l.go:52: | 00:19:07 | dr-restore | assert-backup-target-is-off-cluster       | CMD       | RUN   |
+        === COMMAND
+        /usr/bin/sh -c set -eu
+        
+        # ---- helpers -------------------------------------------------------
+        # Classify a kubectl failure: an RBAC denial is a HARNESS DEFECT and must
+        # fail loudly; an absent API is a genuine precondition gap and may skip.
+        die_or_skip() {
+          case "$2" in
+            *orbidden*|*Unauthorized*|*cannot\ list*|*cannot\ get*)
+              echo "FAIL: conformance runner lacks RBAC for $1 -- fix conformance/incluster/rbac.yaml" >&2
+              echo "$2" >&2
+              exit 1 ;;
+            *)
+              echo "SKIP: $1 not available on this cluster -- $2"
+              echo DR_RESTORE_SKIPPED_OK
+              exit 0 ;;
+          esac
+        }
+        
+        ip2int() {
+          _q="$(echo "$1" | tr '.' ' ')"
+          set -- $_q
+          [ $# -eq 4 ] || { echo -1; return 0; }
+          echo $(( ($1 * 16777216) + ($2 * 65536) + ($3 * 256) + $4 ))
+        }
+        
+        # in_cidr <ip> <a.b.c.d/len> -> 0 when the ip is inside the prefix
+        in_cidr() {
+          case "$2" in *"/"*) ;; *) return 1 ;; esac
+          _net="${2%/*}"; _len="${2#*/}"
+          case "$_len" in ''|*[!0-9]*) return 1 ;; esac
+          [ "$_len" -ge 0 ] && [ "$_len" -le 32 ] || return 1
+          _i="$(ip2int "$1")"; _n="$(ip2int "$_net")"
+          [ "$_i" -ge 0 ] && [ "$_n" -ge 0 ] || return 1
+          [ "$_len" -eq 0 ] && return 0
+          _d=1; _s=0
+          while [ "$_s" -lt $((32 - _len)) ]; do _d=$((_d * 2)); _s=$((_s + 1)); done
+          [ $(( _i / _d )) -eq $(( _n / _d )) ]
+        }
+        
+        # ---- Gate 1: the replicated storage tier the DR-critical data lives on --
+        if ! kubectl get storageclass longhorn >/dev/null 2>&1; then
+          echo "SKIP: 'longhorn' StorageClass absent -- no DR-critical data tier on this cluster yet"
+          echo DR_RESTORE_SKIPPED_OK
+          exit 0
+        fi
+        
+        # ---- Gate 2: the Velero API + a configured BackupStorageLocation --------
+        BSL_LINES="$(kubectl get backupstoragelocations.velero.io -A \
+          -o jsonpath='{range .items[*]}{.metadata.namespace}{" "}{.metadata.name}{" "}{.status.phase}{" "}{.spec.provider}{" "}{.spec.default}{" "}{.spec.config.s3Url}{" "}{.spec.objectStorage.bucket}{"\n"}{end}' \
+          2>&1)" || die_or_skip "velero.io/backupstoragelocations" "$BSL_LINES"
+        if [ -z "$(echo "$BSL_LINES" | tr -d '[:space:]')" ]; then
+          echo "SKIP: Velero API present but NO BackupStorageLocation is configured -- no off-cluster backup target yet"
+          echo DR_RESTORE_SKIPPED_OK
+          exit 0
+        fi
+        echo "backup storage locations:"
+        echo "$BSL_LINES"
+        
+        VNS="$(echo "$BSL_LINES" | head -1 | cut -d' ' -f1)"
+        
+        # ---- Gate 3: Velero server + node-agent (kopia FSB) actually ready -------
+        # File System Backup is the volume-DATA path (platform/velero/helmrelease.yaml:
+        # deployNodeAgent=true, uploaderType=kopia, snapshotsEnabled=false). Without a
+        # ready node-agent no volume data can be captured, so the drill is not runnable.
+        VREADY=0; NAREADY=0
+        for i in $(seq 1 12); do
+          VREADY="$(kubectl -n "$VNS" get deploy velero -o jsonpath='{.status.readyReplicas}' 2>/dev/null || true)"
+          NAREADY="$(kubectl -n "$VNS" get daemonset node-agent -o jsonpath='{.status.numberReady}' 2>/dev/null || true)"
+          echo "poll $i: velero readyReplicas=${VREADY:-0} node-agent numberReady=${NAREADY:-0}"
+          if [ "${VREADY:-0}" -ge 1 ] && [ "${NAREADY:-0}" -ge 1 ]; then break; fi
+          sleep 10
+        done
+        if [ "${VREADY:-0}" -lt 1 ] || [ "${NAREADY:-0}" -lt 1 ]; then
+          echo "SKIP: Velero server and/or its node-agent DaemonSet are not ready in ns '$VNS' -- backup/restore path not available"
+          echo DR_RESTORE_SKIPPED_OK
+          exit 0
+        fi
+        
+        # ---- Pick the BSL this drill will use: prefer the default, and it MUST be
+        #      Available. A CONFIGURED-BUT-UNAVAILABLE target is NOT a precondition
+        #      gap -- it is a live R-STATE-03 defect, so it FAILS (after a bounded
+        #      wait for first-validation on a cold start), it does not skip. --------
+        BSL_NS=""; BSL_NAME=""; BSL_URL=""; BSL_BUCKET=""
+        for i in $(seq 1 12); do
+          BSL_LINES="$(kubectl get backupstoragelocations.velero.io -A \
+            -o jsonpath='{range .items[*]}{.metadata.namespace}{" "}{.metadata.name}{" "}{.status.phase}{" "}{.spec.provider}{" "}{.spec.default}{" "}{.spec.config.s3Url}{" "}{.spec.objectStorage.bucket}{"\n"}{end}' 2>/dev/null || true)"
+          CAND="$(echo "$BSL_LINES" | grep ' Available ' | grep ' true ' | head -1 || true)"
+          [ -n "$CAND" ] || CAND="$(echo "$BSL_LINES" | grep ' Available ' | head -1 || true)"
+          if [ -n "$CAND" ]; then
+            BSL_NS="$(echo "$CAND" | cut -d' ' -f1)"
+            BSL_NAME="$(echo "$CAND" | cut -d' ' -f2)"
+            BSL_URL="$(echo "$CAND" | cut -d' ' -f6)"
+            BSL_BUCKET="$(echo "$CAND" | cut -d' ' -f7)"
+            break
+          fi
+          echo "poll $i: no Available BackupStorageLocation yet"
+          sleep 10
+        done
+        if [ -z "$BSL_NAME" ]; then
+          echo "FAIL: a BackupStorageLocation is configured but NONE reached phase 'Available'." >&2
+          echo "      The off-cluster backup target is unreachable -- R-STATE-03 is BROKEN, not merely untested." >&2
+          echo "$BSL_LINES" >&2
+          exit 1
+        fi
+        echo "using BSL ${BSL_NS}/${BSL_NAME}  bucket=${BSL_BUCKET}  endpoint=${BSL_URL}"
+        
+        # ---- OFF-CLUSTER PROOF (1): an endpoint we can evaluate ------------------
+        if [ -z "$BSL_URL" ]; then
+          echo "FAIL: BackupStorageLocation ${BSL_NS}/${BSL_NAME} exposes no spec.config.s3Url;" >&2
+          echo "      the OFF-CLUSTER property of the backup target cannot be established, so this" >&2
+          echo "      test refuses to claim it. (Extend this check for a non-S3 provider.)" >&2
+          exit 1
+        fi
+        HOST="${BSL_URL#*://}"      # strip scheme
+        HOST="${HOST%%/*}"          # strip path
+        HOST="${HOST%%:*}"          # strip port
+        echo "backup endpoint host: $HOST"
+        
+        case "$HOST" in
+          localhost|*.svc|*.svc.cluster.local|*.cluster.local)
+            echo "FAIL: backup endpoint '$HOST' is a CLUSTER-INTERNAL name -- the backup target is IN the cluster." >&2
+            echo "      An in-cluster backup store cannot satisfy R-STATE-03 (off-cluster backup)." >&2
+            exit 1 ;;
+        esac
+        
+        # Resolve to an IPv4 address. If it cannot be resolved we CANNOT establish the
+        # off-cluster property -- that is a failure, never a silent pass.
+        case "$HOST" in
+          *[!0-9.]*)
+            # Endpoint given as a name. Try the resolvers that may exist in the
+            # runner image, in order; if none is available or none resolves, the
+            # test FAILS below rather than guessing.
+            EPIP="$(getent ahostsv4 "$HOST" 2>/dev/null | head -1 | cut -d' ' -f1 || true)"
+            [ -n "$EPIP" ] || EPIP="$(getent hosts "$HOST" 2>/dev/null | head -1 | cut -d' ' -f1 || true)"
+            [ -n "$EPIP" ] || EPIP="$(nslookup "$HOST" 2>/dev/null | grep -A2 '^Name:' | grep '^Address' | head -1 | sed 's/.*: *//' || true)" ;;
+          *) EPIP="$HOST" ;;
+        esac
+        if [ -z "$EPIP" ]; then
+          echo "FAIL: could not resolve backup endpoint host '$HOST' to an IPv4 address;" >&2
+          echo "      the OFF-CLUSTER property cannot be asserted, so this test does not pass." >&2
+          exit 1
+        fi
+        echo "backup endpoint resolves to: $EPIP"
+        
+        # ---- OFF-CLUSTER PROOF (2): the endpoint is outside every cluster address --
+        case "$EPIP" in 127.*|0.0.0.0) echo "FAIL: backup endpoint $EPIP is loopback -- not off-cluster" >&2; exit 1 ;; esac
+        
+        NODE_IPS="$(kubectl get nodes -o jsonpath='{range .items[*]}{range .status.addresses[*]}{.address}{"\n"}{end}{end}' 2>/dev/null || true)"
+        for a in $NODE_IPS; do
+          if [ "$a" = "$EPIP" ]; then
+            echo "FAIL: backup endpoint $EPIP is a NODE address of this cluster -- the backup is not off-cluster." >&2
+            exit 1
+          fi
+        done
+        echo "endpoint is not any node address (checked $(echo "$NODE_IPS" | grep -c . || true) node addresses)"
+        
+        SVC_IPS="$(kubectl get svc -A -o jsonpath='{range .items[*]}{.spec.clusterIP}{"\n"}{end}' 2>/dev/null || true)"
+        for a in $SVC_IPS; do
+          if [ "$a" = "$EPIP" ]; then
+            echo "FAIL: backup endpoint $EPIP is a Service ClusterIP -- the backup target lives INSIDE the cluster." >&2
+            exit 1
+          fi
+        done
+        echo "endpoint is not any Service ClusterIP (checked $(echo "$SVC_IPS" | grep -c . || true))"
+        
+        POD_IPS="$(kubectl get pods -A -o jsonpath='{range .items[*]}{.status.podIP}{"\n"}{end}' 2>/dev/null || true)"
+        for a in $POD_IPS; do
+          if [ "$a" = "$EPIP" ]; then
+            echo "FAIL: backup endpoint $EPIP is a POD IP -- the backup target is an in-cluster pod." >&2
+            exit 1
+          fi
+        done
+        echo "endpoint is not any Pod IP (checked $(echo "$POD_IPS" | grep -c . || true))"
+        
+        POD_CIDRS="$(kubectl get nodes -o jsonpath='{range .items[*]}{.spec.podCIDR}{"\n"}{range .spec.podCIDRs[*]}{@}{"\n"}{end}{end}' 2>/dev/null || true)"
+        for c in $POD_CIDRS; do
+          case "$c" in *:*) continue ;; esac      # IPv6 prefixes are out of scope here
+          if in_cidr "$EPIP" "$c"; then
+            echo "FAIL: backup endpoint $EPIP falls inside node podCIDR $c -- it is in the cluster pod network." >&2
+            exit 1
+          fi
+        done
+        echo "endpoint is outside every node podCIDR (checked: $(echo "$POD_CIDRS" | tr '\n' ' '))"
+        
+        # Best-effort (needs networking.k8s.io/ServiceCIDR, which the least-privilege
+        # runner may not read): the checks above are the authoritative ones.
+        SVC_CIDRS="$(kubectl get servicecidrs.networking.k8s.io -o jsonpath='{range .items[*]}{range .spec.cidrs[*]}{@}{"\n"}{end}{end}' 2>/dev/null || true)"
+        if [ -n "$SVC_CIDRS" ]; then
+          for c in $SVC_CIDRS; do
+            case "$c" in *:*) continue ;; esac
+            if in_cidr "$EPIP" "$c"; then
+              echo "FAIL: backup endpoint $EPIP falls inside the Service CIDR $c -- it is in the cluster." >&2
+              exit 1
+            fi
+          done
+          echo "endpoint is outside every ServiceCIDR ($(echo "$SVC_CIDRS" | tr '\n' ' '))"
+        else
+          echo "(ServiceCIDR objects unreadable -- skipping that best-effort check; ClusterIP/PodIP/podCIDR checks stand)"
+        fi
+        
+        echo "OFF_CLUSTER_TARGET_OK  bsl=${BSL_NS}/${BSL_NAME} endpoint=${EPIP} bucket=${BSL_BUCKET}"
+    l.go:52: | 00:19:11 | dr-restore | assert-backup-target-is-off-cluster       | SCRIPT    | LOG   |
+        === STDOUT
+        backup storage locations:
+        velero default Available aws true http://192.168.1.9:9000 velero
+        poll 1: velero readyReplicas=1 node-agent numberReady=3
+        using BSL velero/default  bucket=velero  endpoint=http://192.168.1.9:9000
+        backup endpoint host: 192.168.1.9
+        backup endpoint resolves to: 192.168.1.9
+        endpoint is not any node address (checked 6 node addresses)
+        endpoint is not any Service ClusterIP (checked 81)
+        endpoint is not any Pod IP (checked 186)
+        endpoint is outside every node podCIDR (checked: 10.42.0.0/24 10.42.0.0/24 10.42.1.0/24 10.42.1.0/24 10.42.2.0/24 10.42.2.0/24 )
+        endpoint is outside every ServiceCIDR (10.43.0.0/16 )
+        OFF_CLUSTER_TARGET_OK  bsl=velero/default endpoint=192.168.1.9 bucket=velero
+    l.go:52: | 00:19:11 | dr-restore | assert-backup-target-is-off-cluster       | SCRIPT    | DONE  |
+    l.go:52: | 00:19:11 | dr-restore | assert-backup-target-is-off-cluster       | TRY       | END   |
+    l.go:52: | 00:19:11 | dr-restore | assert-backups-are-scheduled              | TRY       | BEGIN |
+    l.go:52: | 00:19:11 | dr-restore | assert-backups-are-scheduled              | CMD       | RUN   |
+        === COMMAND
+        /usr/bin/sh -c set -eu
+        SCHED="$(kubectl get schedules.velero.io -A \
+          -o jsonpath='{range .items[*]}{.metadata.namespace}{"/"}{.metadata.name}{" phase="}{.status.phase}{" cron="}{.spec.schedule}{" lastBackup="}{.status.lastBackup}{"\n"}{end}' 2>/dev/null || true)"
+        if [ -z "$(echo "$SCHED" | tr -d '[:space:]')" ]; then
+          # Distinguish "Velero absent" (skip, in lock-step with step 1) from
+          # "Velero present but nothing scheduled" (a real R-STATE-03 defect).
+          if kubectl get backupstoragelocations.velero.io -A >/dev/null 2>&1; then
+            if [ -z "$(kubectl get backupstoragelocations.velero.io -A -o name 2>/dev/null || true)" ]; then
+              echo "SKIP: no BackupStorageLocation configured -- scheduling not applicable yet"
+              echo DR_SCHEDULE_SKIPPED_OK
+              exit 0
+            fi
+            echo "FAIL: Velero is configured with a backup target but declares NO Schedule --" >&2
+            echo "      R-STATE-03 requires SCHEDULED off-cluster backups, not manual ones." >&2
+            exit 1
+          fi
+          echo "SKIP: Velero API absent -- backup scheduling not applicable on this cluster yet"
+          echo DR_SCHEDULE_SKIPPED_OK
+          exit 0
+        fi
+        echo "velero schedules:"
+        echo "$SCHED"
+        # A Schedule that exists but is paused/disabled backs nothing up.
+        if echo "$SCHED" | grep -q 'phase=Enabled'; then
+          echo BACKUPS_ARE_SCHEDULED_OK
+        else
+          echo "FAIL: no Velero Schedule is in phase 'Enabled' -- scheduled off-cluster backups are not running." >&2
+          exit 1
+        fi
+    l.go:52: | 00:19:11 | dr-restore | assert-backups-are-scheduled              | SCRIPT    | LOG   |
+        === STDOUT
+        velero schedules:
+        velero/velero-daily phase=Enabled cron=0 3 * * * lastBackup=2026-09-01T03:00:27Z
+        velero/velero-daily-resources-only phase=Enabled cron=0 3 * * * lastBackup=2026-09-01T03:00:27Z
+        BACKUPS_ARE_SCHEDULED_OK
+    l.go:52: | 00:19:11 | dr-restore | assert-backups-are-scheduled              | SCRIPT    | DONE  |
+    l.go:52: | 00:19:11 | dr-restore | assert-backups-are-scheduled              | TRY       | END   |
+    l.go:52: | 00:19:11 | dr-restore | data-restores-from-the-off-cluster-backup | TRY       | BEGIN |
+    l.go:52: | 00:19:11 | dr-restore | data-restores-from-the-off-cluster-backup | CMD       | RUN   |
+        === COMMAND
+        /usr/bin/sh -c set -eu
+        NS="$NAMESPACE"
+        SRC="${NS}-dr-src"          # scratch source namespace (destroyed by design)
+        DST="${NS}-dr-dst"          # clean restore target (must not pre-exist)
+        BK="${NS}-dr-backup"
+        RS="${NS}-dr-restore"
+        OWNER_LABEL="conformance.home.k3s/created-by=${NS}"
+        
+        # ---- Re-derive the preconditions (steps do not share shell state). Every
+        #      skip below mirrors step 1 exactly, so the whole test skips or runs
+        #      as a unit -- it can never half-run. -----------------------------
+        if ! kubectl get storageclass longhorn >/dev/null 2>&1; then
+          echo "SKIP: 'longhorn' StorageClass absent"; echo DR_RESTORE_SKIPPED_OK; exit 0
+        fi
+        BSL_LINES="$(kubectl get backupstoragelocations.velero.io -A \
+          -o jsonpath='{range .items[*]}{.metadata.namespace}{" "}{.metadata.name}{" "}{.status.phase}{" "}{.spec.default}{"\n"}{end}' 2>/dev/null || true)"
+        CAND="$(echo "$BSL_LINES" | grep ' Available ' | grep ' true$' | head -1 || true)"
+        [ -n "$CAND" ] || CAND="$(echo "$BSL_LINES" | grep ' Available ' | head -1 || true)"
+        if [ -z "$CAND" ]; then
+          echo "SKIP: no Available BackupStorageLocation (see the off-cluster step for the authoritative verdict)"
+          echo DR_RESTORE_SKIPPED_OK; exit 0
+        fi
+        VNS="$(echo "$CAND" | cut -d' ' -f1)"
+        BSL_NAME="$(echo "$CAND" | cut -d' ' -f2)"
+        if [ "$(kubectl -n "$VNS" get daemonset node-agent -o jsonpath='{.status.numberReady}' 2>/dev/null || echo 0)" -lt 1 ]; then
+          echo "SKIP: Velero node-agent (kopia FSB) not ready -- volume data cannot be backed up"
+          echo DR_RESTORE_SKIPPED_OK; exit 0
+        fi
+        echo "velero ns=$VNS bsl=$BSL_NAME src=$SRC dst=$DST"
+        
+        # A clean restore target means PREVIOUSLY NONEXISTENT, and the source name must
+        # be free. If either is lying around from an aborted run, remove it before we
+        # claim "clean" -- and fail loudly if it will not go, because a half-deleted
+        # namespace would silently invalidate the destroy proof below.
+        kubectl delete namespace "$DST" "$SRC" --ignore-not-found --wait=true --timeout=300s
+        
+        # ============================ GIVEN ==============================
+        # A DR-critical stateful workload with known data on the replicated tier.
+        CANARY="dr-canary-$(date +%s%N)"
+        kubectl create namespace "$SRC"
+        kubectl label namespace "$SRC" "$OWNER_LABEL" --overwrite
+        
+        kubectl -n "$SRC" apply -f - <<EOF
+        apiVersion: v1
+        kind: PersistentVolumeClaim
+        metadata:
+          name: dr-data
+          labels:
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          accessModes: [ReadWriteOnce]
+          storageClassName: longhorn
+          resources:
+            requests:
+              storage: 1Gi
+        EOF
+        
+        kubectl -n "$SRC" apply -f - <<EOF
+        apiVersion: v1
+        kind: Pod
+        metadata:
+          name: dr-workload
+          labels:
+            app: dr-workload
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          restartPolicy: Never
+          containers:
+            - name: app
+              image: busybox:1.36.1
+              command: ["sh", "-c", "sleep 7200"]
+              volumeMounts:
+                - name: data
+                  mountPath: /data
+          volumes:
+            - name: data
+              persistentVolumeClaim:
+                claimName: dr-data
+        EOF
+        
+        kubectl -n "$SRC" wait --for=condition=Ready pod/dr-workload --timeout=300s
+        printf '%s' "$CANARY" | kubectl -n "$SRC" exec -i dr-workload -- sh -c 'cat > /data/canary && sync'
+        echo "seeded canary: $(kubectl -n "$SRC" exec dr-workload -- cat /data/canary)"
+        
+        ORIG_PV="$(kubectl -n "$SRC" get pvc dr-data -o jsonpath='{.spec.volumeName}')"
+        [ -n "$ORIG_PV" ] || { echo "FAIL: source PVC never bound to a PV" >&2; exit 1; }
+        echo "original in-cluster PersistentVolume: $ORIG_PV"
+        
+        # ======================= WHEN (part 1): back up off-cluster =======
+        # Created as a Velero Backup CR -- exactly what `velero backup create` does.
+        # defaultVolumesToFsBackup:true selects the kopia File System Backup path, so
+        # the VOLUME DATA (not just the resource JSON) is uploaded to the object store.
+        # ttl is short: if the finally-step DeleteBackupRequest is ever lost, Velero's
+        # own GC still removes this drill's objects from the bucket.
+        kubectl apply -f - <<EOF
+        apiVersion: velero.io/v1
+        kind: Backup
+        metadata:
+          name: ${BK}
+          namespace: ${VNS}
+          labels:
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          includedNamespaces: [${SRC}]
+          storageLocation: ${BSL_NAME}
+          snapshotVolumes: false
+          defaultVolumesToFsBackup: true
+          ttl: 2h0m0s
+        EOF
+        
+        BPHASE=""
+        for i in $(seq 1 90); do
+          BPHASE="$(kubectl -n "$VNS" get backups.velero.io "$BK" -o jsonpath='{.status.phase}' 2>/dev/null || true)"
+          echo "poll $i: backup phase=${BPHASE:-<pending>}"
+          case "${BPHASE:-}" in
+            Completed|Failed|PartiallyFailed|FailedValidation) break ;;
+          esac
+          sleep 10
+        done
+        if [ "${BPHASE:-}" != "Completed" ]; then
+          echo "FAIL: off-cluster backup did not complete (phase=${BPHASE:-<timeout>})" >&2
+          kubectl -n "$VNS" get backups.velero.io "$BK" -o yaml >&2 || true
+          exit 1
+        fi
+        echo "backup $BK Completed to ${BSL_NAME}"
+        
+        # ---- OFF-CLUSTER PROOF (3): the VOLUME DATA really landed in the remote
+        #      kopia repository -- a PodVolumeBackup Completed with a snapshot ID.
+        PVB="$(kubectl -n "$VNS" get podvolumebackups.velero.io \
+                 -l velero.io/backup-name="$BK" \
+                 -o jsonpath='{range .items[*]}{.metadata.name}{" "}{.status.phase}{" "}{.status.snapshotID}{"\n"}{end}' 2>/dev/null || true)"
+        echo "pod volume backups:"
+        echo "$PVB"
+        if [ -z "$(echo "$PVB" | tr -d '[:space:]')" ]; then
+          echo "FAIL: the backup captured NO pod volume data (no PodVolumeBackup)." >&2
+          echo "      Resource-only backups cannot restore DR-critical DATA." >&2
+          exit 1
+        fi
+        # A line is "<name> <phase> <snapshotID>"; require Completed AND a
+        # non-empty snapshot ID (an empty ID means nothing reached the repository).
+        GOOD_PVB="$(echo "$PVB" | grep -cE ' Completed [^[:space:]]+$' || true)"
+        if [ "${GOOD_PVB:-0}" -lt 1 ]; then
+          echo "FAIL: no PodVolumeBackup reached phase Completed with a snapshot ID --" >&2
+          echo "      the volume data did not reach the off-cluster repository." >&2
+          exit 1
+        fi
+        echo "volume data uploaded off-cluster (PodVolumeBackup Completed with a kopia snapshotID)"
+        
+        # ============ WHEN (part 2): FAULT INJECTION -- annihilate the source ====
+        # Destroy EVERY in-cluster copy: the pod, the PVC, the namespace, and the
+        # underlying PersistentVolume (and with it the Longhorn replicas). After this
+        # there is no in-cluster source the restore could quietly read from.
+        kubectl delete namespace "$SRC" --wait=true --timeout=420s
+        for i in $(seq 1 30); do
+          if ! kubectl get namespace "$SRC" >/dev/null 2>&1; then break; fi
+          echo "poll $i: waiting for namespace $SRC to disappear"
+          sleep 10
+        done
+        if kubectl get namespace "$SRC" >/dev/null 2>&1; then
+          echo "FAIL: source namespace $SRC did not terminate; the destroy step is not convincing" >&2
+          exit 1
+        fi
+        echo "source namespace destroyed"
+        
+        # The longhorn StorageClass reclaims Delete, so the PV should already be gone;
+        # force it if a Retain policy (or a stuck finalizer) left it behind, because a
+        # surviving PV would make the restore prove nothing about off-cluster recovery.
+        kubectl delete pv "$ORIG_PV" --ignore-not-found --wait=false || true
+        for i in $(seq 1 30); do
+          if ! kubectl get pv "$ORIG_PV" >/dev/null 2>&1; then break; fi
+          echo "poll $i: waiting for PersistentVolume $ORIG_PV to disappear"
+          sleep 10
+        done
+        if kubectl get pv "$ORIG_PV" >/dev/null 2>&1; then
+          echo "FAIL: the original PersistentVolume $ORIG_PV SURVIVED the destroy step." >&2
+          echo "      An in-cluster copy of the data still exists, so a successful restore" >&2
+          echo "      would NOT prove recovery from the off-cluster backup. Refusing to pass." >&2
+          exit 1
+        fi
+        echo "original PersistentVolume $ORIG_PV is GONE -- no in-cluster copy of the data remains"
+        
+        # Best-effort corroboration (the least-privilege runner may not read longhorn.io):
+        # the Longhorn Volume CR and its replicas should be gone too.
+        if kubectl -n longhorn-system get volumes.longhorn.io "$ORIG_PV" >/dev/null 2>&1; then
+          echo "FAIL: Longhorn Volume $ORIG_PV still exists after PV deletion -- replicas survive in-cluster" >&2
+          exit 1
+        fi
+        echo "(longhorn Volume CR $ORIG_PV not present -- either deleted or not readable by this identity)"
+        
+        # ============================ RESTORE ============================
+        # Into a CLEAN, previously-nonexistent namespace (Velero creates it), which is
+        # the catalog's "restored into a clean state".
+        kubectl apply -f - <<EOF
+        apiVersion: velero.io/v1
+        kind: Restore
+        metadata:
+          name: ${RS}
+          namespace: ${VNS}
+          labels:
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          backupName: ${BK}
+          includedNamespaces: [${SRC}]
+          namespaceMapping:
+            ${SRC}: ${DST}
+          existingResourcePolicy: none
+        EOF
+        
+        RPHASE=""
+        for i in $(seq 1 90); do
+          RPHASE="$(kubectl -n "$VNS" get restores.velero.io "$RS" -o jsonpath='{.status.phase}' 2>/dev/null || true)"
+          echo "poll $i: restore phase=${RPHASE:-<pending>}"
+          case "${RPHASE:-}" in
+            Completed|Failed|PartiallyFailed|FailedValidation) break ;;
+          esac
+          sleep 10
+        done
+        if [ "${RPHASE:-}" != "Completed" ]; then
+          echo "FAIL: restore did not complete (phase=${RPHASE:-<timeout>})" >&2
+          kubectl -n "$VNS" get restores.velero.io "$RS" -o yaml >&2 || true
+          kubectl -n "$VNS" get podvolumerestores.velero.io -l velero.io/restore-name="$RS" -o wide >&2 || true
+          exit 1
+        fi
+        echo "restore $RS Completed into $DST"
+        
+        # ============================= THEN ==============================
+        # The service returns WITH ITS DATA. With kopia FSB the restored pod carries a
+        # `restore-wait` init container that blocks until the node-agent has written the
+        # volume contents back, so Ready here already implies the data landed.
+        if ! kubectl -n "$DST" wait --for=condition=Ready pod/dr-workload --timeout=600s; then
+          echo "FAIL: restored workload never became Ready in the clean namespace $DST" >&2
+          kubectl -n "$DST" describe pod dr-workload >&2 || true
+          kubectl -n "$VNS" get podvolumerestores.velero.io -l velero.io/restore-name="$RS" -o wide >&2 || true
+          exit 1
+        fi
+        
+        NEW_PV="$(kubectl -n "$DST" get pvc dr-data -o jsonpath='{.spec.volumeName}' 2>/dev/null || true)"
+        echo "restored PVC bound to PersistentVolume: ${NEW_PV:-<none>}"
+        [ -n "$NEW_PV" ] || { echo "FAIL: restored PVC did not bind a PV" >&2; exit 1; }
+        if [ "$NEW_PV" = "$ORIG_PV" ]; then
+          echo "FAIL: the restored PVC rebound the ORIGINAL PersistentVolume ($ORIG_PV)." >&2
+          echo "      That is an in-cluster survival, not an off-cluster restore." >&2
+          exit 1
+        fi
+        echo "restored onto a NEW volume ($NEW_PV != $ORIG_PV) -- the data came from outside the cluster"
+        
+        GOT="$(kubectl -n "$DST" exec dr-workload -- cat /data/canary)"
+        echo "recovered='$GOT' expected='$CANARY'"
+        if [ "$GOT" != "$CANARY" ]; then
+          echo "FAIL: restored data does not match what was backed up -- DR restore lost/corrupted data" >&2
+          exit 1
+        fi
+        
+        echo DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK
+    l.go:52: | 00:21:16 | dr-restore | data-restores-from-the-off-cluster-backup | SCRIPT    | LOG   |
+        === STDOUT
+        velero ns=velero bsl=default src=chainsaw-cunning-hen-dr-src dst=chainsaw-cunning-hen-dr-dst
+        namespace/chainsaw-cunning-hen-dr-src created
+        namespace/chainsaw-cunning-hen-dr-src labeled
+        persistentvolumeclaim/dr-data created
+        pod/dr-workload created
+        pod/dr-workload condition met
+        seeded canary: dr-canary-1788308352223263220
+        original in-cluster PersistentVolume: pvc-b9523c15-770e-4fc5-8130-ca2e9d9da745
+        backup.velero.io/chainsaw-cunning-hen-dr-backup created
+        poll 1: backup phase=InProgress
+        poll 2: backup phase=InProgress
+        poll 3: backup phase=Completed
+        backup chainsaw-cunning-hen-dr-backup Completed to default
+        pod volume backups:
+        chainsaw-cunning-hen-dr-backup-l95lw Completed 47fa2737115e17142fb41857cef4e779
+        volume data uploaded off-cluster (PodVolumeBackup Completed with a kopia snapshotID)
+        namespace "chainsaw-cunning-hen-dr-src" deleted
+        source namespace destroyed
+        original PersistentVolume pvc-b9523c15-770e-4fc5-8130-ca2e9d9da745 is GONE -- no in-cluster copy of the data remains
+        (longhorn Volume CR pvc-b9523c15-770e-4fc5-8130-ca2e9d9da745 not present -- either deleted or not readable by this identity)
+        restore.velero.io/chainsaw-cunning-hen-dr-restore created
+        poll 1: restore phase=InProgress
+        poll 2: restore phase=InProgress
+        poll 3: restore phase=InProgress
+        poll 4: restore phase=Completed
+        restore chainsaw-cunning-hen-dr-restore Completed into chainsaw-cunning-hen-dr-dst
+        pod/dr-workload condition met
+        restored PVC bound to PersistentVolume: pvc-63c47973-9c7f-4423-a27e-caa008026e49
+        restored onto a NEW volume (pvc-63c47973-9c7f-4423-a27e-caa008026e49 != pvc-b9523c15-770e-4fc5-8130-ca2e9d9da745) -- the data came from outside the cluster
+        recovered='dr-canary-1788308352223263220' expected='dr-canary-1788308352223263220'
+        DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK
+        === STDERR
+        Defaulted container "app" out of: app, restore-wait (init)
+    l.go:52: | 00:21:16 | dr-restore | data-restores-from-the-off-cluster-backup | SCRIPT    | DONE  |
+    l.go:52: | 00:21:16 | dr-restore | data-restores-from-the-off-cluster-backup | TRY       | END   |
+    l.go:52: | 00:21:16 | dr-restore | data-restores-from-the-off-cluster-backup | FINALLY   | BEGIN |
+    l.go:52: | 00:21:16 | dr-restore | data-restores-from-the-off-cluster-backup | CMD       | RUN   |
+        === COMMAND
+        /usr/bin/sh -c set -u
+        NS="$NAMESPACE"
+        SRC="${NS}-dr-src"; DST="${NS}-dr-dst"; BK="${NS}-dr-backup"; RS="${NS}-dr-restore"
+        
+        VNS="$(kubectl get backupstoragelocations.velero.io -A -o jsonpath='{.items[0].metadata.namespace}' 2>/dev/null || true)"
+        
+        # Velero objects first: a DeleteBackupRequest makes Velero remove the backup
+        # DATA from the off-cluster bucket, not just the CR (self-cleaning contract).
+        if [ -n "$VNS" ]; then
+          kubectl -n "$VNS" delete restores.velero.io "$RS" --ignore-not-found --wait=false || true
+          if kubectl -n "$VNS" get backups.velero.io "$BK" >/dev/null 2>&1; then
+            kubectl apply -f - <<EOF || true
+        apiVersion: velero.io/v1
+        kind: DeleteBackupRequest
+        metadata:
+          name: ${BK}-delete
+          namespace: ${VNS}
+          labels:
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          backupName: ${BK}
+        EOF
+            for i in $(seq 1 18); do
+              kubectl -n "$VNS" get backups.velero.io "$BK" >/dev/null 2>&1 || break
+              sleep 10
+            done
+            # Backstop if Velero could not process the request (the 2h ttl also GCs it).
+            kubectl -n "$VNS" delete backups.velero.io "$BK" --ignore-not-found --wait=false || true
+            kubectl -n "$VNS" delete deletebackuprequests.velero.io "${BK}-delete" --ignore-not-found --wait=false || true
+          fi
+          echo "velero objects for $NS cleaned up (ns $VNS)"
+        fi
+        
+        # Scratch namespaces (both, in case the run aborted at any point).
+        for n in "$DST" "$SRC"; do
+          kubectl delete namespace "$n" --ignore-not-found --wait=false || true
+        done
+        # Anything left labelled as ours (defensive; the two names above are the only
+        # namespaces this test ever creates).
+        kubectl delete namespace -l "conformance.home.k3s/created-by=${NS}" --ignore-not-found --wait=false || true
+        
+        # Released PVs from either namespace's PVCs would otherwise leak storage.
+        for pv in $(kubectl get pv -o jsonpath='{range .items[*]}{.metadata.name}{" "}{.spec.claimRef.namespace}{"\n"}{end}' 2>/dev/null | grep -E " (${SRC}|${DST})$" | cut -d' ' -f1 || true); do
+          kubectl delete pv "$pv" --ignore-not-found --wait=false || true
+          echo "released leftover PersistentVolume: $pv"
+        done
+        
+        echo "dr-restore teardown complete (best-effort; every object was created by this test)"
+    l.go:52: | 00:21:28 | dr-restore | data-restores-from-the-off-cluster-backup | SCRIPT    | LOG   |
+        === STDOUT
+        restore.velero.io "chainsaw-cunning-hen-dr-restore" deleted from velero namespace
+        deletebackuprequest.velero.io/chainsaw-cunning-hen-dr-backup-delete created
+        velero objects for chainsaw-cunning-hen cleaned up (ns velero)
+        namespace "chainsaw-cunning-hen-dr-dst" deleted
+        namespace "chainsaw-cunning-hen-dr-dst" deleted
+        persistentvolume "pvc-63c47973-9c7f-4423-a27e-caa008026e49" deleted
+        released leftover PersistentVolume: pvc-63c47973-9c7f-4423-a27e-caa008026e49
+        dr-restore teardown complete (best-effort; every object was created by this test)
+    l.go:52: | 00:21:28 | dr-restore | data-restores-from-the-off-cluster-backup | SCRIPT    | DONE  |
+    l.go:52: | 00:21:28 | dr-restore | data-restores-from-the-off-cluster-backup | FINALLY   | END   |
+    l.go:52: | 00:21:28 | dr-restore | @chainsaw                                 | CLEANUP   | BEGIN |
+    l.go:52: | 00:21:28 | dr-restore | @chainsaw                                 | DELETE    | OK    | v1/Namespace @ chainsaw-cunning-hen
+    l.go:52: | 00:21:36 | dr-restore | @chainsaw                                 | CLEANUP   | END   |
+--- PASS: chainsaw (0.00s)
+    --- PASS: chainsaw/dr-restore (149.05s)
+PASS
+Tests Summary...
+- Passed  tests 1
+- Failed  tests 0
+- Skipped tests 0
+Done.
+merge_junit: merged 1 report(s) -> /work/conformance/_artifacts/report.junit.xml (tests=1 failures=0 errors=0 skipped=0)
+[run.sh] Done. JUnit: /work/conformance/_artifacts/report.junit.xml | Coverage: /work/conformance/_artifacts/coverage/coverage.md

conformance/runs/ledger.jsonl

@@ -0,0 +1,2 @@
+{"chainsaw_version": "v0.2.12", "env": "dev", "git_sha": "57d4df8c4f992732a49f3e2daddcace866778ab0", "junit_result": "passed", "kube_version": "v1.36.4+k3s1", "layer": "L3", "note": "run log OUTPUT carries every declared pass token (NODE_LOSS_VOLUME_AVAILABLE_OK) and no skip token [log scoped to this testcase; tokens read from real-output sections only]", "proof": "proven", "requirements": ["R-STATE-02"], "run_id": "20260901T235117Z-e9a4b66", "sentinel": "NODE_LOSS_VOLUME_AVAILABLE_OK", "test": "node-loss", "ts_utc": "2026-09-01T23:51:17Z"}
+{"chainsaw_version": "v0.2.12", "env": "dev", "git_sha": "fdc3265585f4b775c0a6ae3fb33c837b0c643655", "junit_result": "passed", "kube_version": "v1.36.4+k3s1", "layer": "L3", "note": "run log OUTPUT carries every declared pass token (OFF_CLUSTER_TARGET_OK, BACKUPS_ARE_SCHEDULED_OK, DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK) and no skip token [log scoped to this testcase; tokens read from real-output sections only]", "proof": "proven", "requirements": ["R-STATE-03"], "run_id": "20260902T001907Z-fdc3265", "sentinel": "DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK", "test": "dr-restore", "ts_utc": "2026-09-02T00:19:07Z"}

infra/PROD-PROVISIONING.md

@@ -25,20 +25,124 @@ Fill a row per node as it lands. Node 1 is as-found on 2026-08-31.
 |---|---|---|---|
 | Hostname | `k3s-prod-1` | `k3s-prod-2` | `k3s-prod-3` |
 | LAN IP | `192.168.2.10` | `192.168.2.11` | `192.168.2.12` |
-| Model | HP EliteDesk 800 G5 Desktop Mini | | |
-| CPU | i7-9700T, 8c/8t, VT-x | | |
-| RAM | 31 GiB | | |
-| Disks | 1× 477 GB SATA SSD (`C400-MTFDDAC512M`) | | |
-| OS | Debian 13 (trixie), kernel 6.12 | | |
-| Firmware | HP R21 Ver. 02.26.00 | | |
-| `/dev/kvm` | present | | |
+| Model | HP EliteDesk 800 G5 Desktop Mini | HP EliteDesk 800 G5 Desktop Mini | |
+| CPU | i7-9700T, 8c/8t, VT-x | i7-9700T, 8c/8t, VT-x | |
+| RAM | 31 GiB (2×16 GB Micron) | **2.6 GiB usable of 16 GB — see §0b** | |
+| Disks | 1× 477 GB SATA SSD (`C400-MTFDDAC512M`, ~2011) | 1× 477 GB **NVMe** (`PM9A1 Samsung`) | |
+| Drive health | 69% life, 15 grown bad blocks, 187 erase fails | **96% life**, 2142 h, PASSED | |
+| OS | Debian 13 (trixie), kernel 6.12 | Debian 13 (trixie), kernel 6.12 | |
+| Firmware | HP R21 Ver. 02.26.00 | HP R21 Ver. 02.26.00 | |
+| `/dev/kvm` | present | present | |
+| Serial | MXL1052NGN | MXL0073949 | |
+
+**The nodes are NOT hardware-symmetric.** Node 1 has a ~2011 SATA SSD with real wear; node 2 has a
+healthy modern NVMe. §2 requires an identical disk layout across all three because Longhorn replica
+placement assumes symmetry — so this is a live input to the disk decision, not a footnote. Node 2's
+NVMe is the drive node 1 should have had.
 
 Dev nodes for comparison: 8 vCPU / 24 GiB / Debian 13, **two** dedicated data disks (Longhorn + etcd).
 
 ---
 
+## 0b. OPEN HARDWARE FAULT — `k3s-prod-2` can only address ~2.6 GiB of its 16 GB
+
+Found 2026-09-01 by `playbooks/node-health.yml` on node 2's first health run. **Do not install
+more RAM until this is understood** — see the warning at the end.
+
+| Evidence | Reading |
+|---|---|
+| DMI (`dmidecode -t memory`) | **16 GB Samsung M471A2K43DB1-CTD in DIMM1 @ 2667 MT/s**, DIMM3 empty |
+| BIOS e820 map | reports ~16 GiB usable, incl. `0x100000000-0x42f7fffff` |
+| Kernel summary | `Memory: 2568544K/16546088K available (13958980K reserved)` |
+| `last_pfn` | revised **down** from `0x42f800` (~16.7 GiB) to `0xc3c10` (~3.06 GiB) in early boot |
+| Zones | `Normal` zone `present 3340288` pages (~12.7 GiB) but **`managed 0`** |
+| `MemTotal` | **2,753,284 kB ≈ 2.6 GiB** |
+| Memory blocks | 127 online, 128 MiB block size |
+
+**The DIMM is healthy.** It is present, correctly identified, and running at its rated speed. The
+kernel *sees* all 16 GB and then reserves 13.3 GiB of it. Everything below ~3 GiB is usable and
+everything above 4 GiB is present-but-unmanaged — the classic signature of **memory remapping
+above 4 GB not being applied**, not of failing memory.
+
+Node 1 is the control: **identical** HP EliteDesk 800 G5 Mini, **identical** BIOS R21 Ver. 02.26.00,
+identical i7-9700T — and it addresses its full 31 GiB. So this is not a firmware-version defect; it
+is per-machine state.
+
+**BIOS settings compared programmatically (2026-09-01).** Both nodes load the `hp-bioscfg`
+kernel driver, which exposes **215 BIOS attributes** read/write at
+`/sys/class/firmware-attributes/hp-bioscfg/attributes/<name>/current_value`. No BIOS passwords
+are set (`authentication/*/is_enabled` = 0).
+
+**They are READ-ONLY in practice, despite `current_value` having mode `rw`.** A write attempt was
+made on 2026-09-01 and the FIRMWARE refused it:
+`hp_bioscfg: Returned error 0x4, "Invalid command type"`, surfacing as `printf: I/O error`.
+HP requires BIOS-admin authentication for programmatic changes, and both credentials are absent
+— `Setup Password is_enabled=0` (role `bios-admin`) and `SPM key_mechanism=not provisioned`.
+Secure Boot is also enabled. So BIOS changes on these nodes are an **F10 exercise** unless a BIOS
+Setup Password is deliberately provisioned (see §1).
+
+What the comparison ruled OUT as the cause:
+- **Firmware inventory is correct.** Node 2's BIOS itself reports `Memory Size=16384 MB` and
+  `Processor 1 DIMM1=16 GB Samsung` / `DIMM3=Empty`. The firmware is not under-counting.
+- **No memory-remap / above-4G-decoding attribute exists** on this platform — not present on
+  either node, so it cannot be a mis-set option.
+- **MTRRs are effectively identical** between the nodes and there is **no MTRR trim warning**,
+  which rules out the classic "BIOS bug: MTRRs don't cover all of memory, losing N MB" path.
+- **`/proc/iomem` registers `100000000-42f7fffff` as `System RAM`** and 127 × 128 MiB memory
+  blocks report `online`. The memory reaches the kernel and is then reserved.
+
+Real BIOS differences found (node 1 = works, node 2 = broken):
+
+| Attribute | node 1 | node 2 |
+|---|---|---|
+| **After Power Loss** | Power On | **Power Off** ← violates §1 |
+| **Fast Boot** | Disable | **Enable** ← leading hypothesis |
+| Legacy Boot Options | Disable | Enable |
+| TPM Activation Policy | F1 to Boot | Allow user to reject |
+| Microsoft/Windows UEFI CA 2023 | Enable | Disable |
+| Memory Size | 32768 MB (2×16 GB Micron) | 16384 MB (1×16 GB Samsung) |
+
+**Leading hypothesis: `Fast Boot=Enable`.** HP Fast Boot reuses *cached memory-training data*
+rather than retraining at each boot. If the DIMM was fitted while Fast Boot was on, stale
+training data is a plausible route to memory being present, inventoried, handed over — and then
+reserved. It is also the one memory-relevant setting that differs from the working node. This is
+a hypothesis, not a conclusion: it was NOT tested, because changing it requires a firmware write
+and a reboot, which needs operator sanction.
+
+To investigate, cheapest first:
+- [ ] **Set `Fast Boot=Disable` and reboot** (tests the hypothesis directly, and matches node 1).
+      **Must be done in F10** — the firmware refuses programmatic writes (above).
+- [ ] **Set `After Power Loss=Power On`** regardless of the memory question — §1 requires it and
+      node 2 currently violates it.
+- [ ] Clear CMOS / load setup defaults on node 2 to force a full memory retrain, then re-check.
+- [ ] Reseat the DIMM; try it in DIMM3; try it in node 1 (swap test) — that isolates DIMM vs slot
+      vs board in one move.
+- [ ] `memtest86+` if the above do not resolve it.
+
+> ⚠ **Do not assume the incoming 32 GB fixes this.** If the fault is the slot, the board, or a BIOS
+> setting rather than the DIMM, 32 GB will present exactly the same way and the money is wasted.
+> **Verify `MemTotal` after any RAM change** — `playbooks/node-health.yml -e node_health_hosts=k3s_prod`
+> reports it. A node that can address 2.6 GiB cannot run k3s + Longhorn + a workload share.
+
 ## 1. Firmware / BIOS (per node, before OS install)
 
+> **These are MACHINE-CHECKABLE — but NOT machine-enforceable.** The `hp-bioscfg` driver exposes
+> 215 BIOS attributes at `/sys/class/firmware-attributes/hp-bioscfg/attributes/`, and **reads work
+> fine**: node 1 and node 2 were diffed programmatically, which is how the drift in §0b was found
+> at all. Nobody could have spotted `After Power Loss=Power Off` on node 2 by eye.
+>
+> **Writes are refused by the firmware** — verified 2026-09-01, `hp_bioscfg: Returned error 0x4,
+> "Invalid command type"`. HP requires BIOS-admin authentication and neither credential is
+> provisioned (`Setup Password is_enabled=0`, `SPM not provisioned`). Setting these therefore means
+> F10 on the box.
+>
+> **Follow-up worth doing: extend `roles/node_health` to ASSERT this checklist** — that is
+> achievable today with reads alone, and would have caught node 2's drift on its first health run.
+> Converging it automatically additionally requires provisioning a BIOS Setup Password on every
+> node, which is a real security decision (a stored credential that can rewrite firmware) and is
+> the operator's call, not a default.
+
+
 - [ ] **Virtualization enabled** — VT-x *and* VT-d. Required for KubeVirt (R-PLAT-03); verify after
       boot with `/dev/kvm` present and `grep -cE 'vmx|svm' /proc/cpuinfo` non-zero.
 - [ ] **AC power recovery = Power On.** A homelab node must return after a power cut without a

infra/ansible/inventory/hosts.ini

@@ -87,11 +87,13 @@ proxmox ansible_host=192.168.2.102 ansible_port=22 ansible_user=root ansible_ssh
 k3s-prod-1 ansible_host=192.168.2.10 ansible_port=22 k3s_node_ip=192.168.2.10
 
 [k3s_prod_secondary]
-# Addresses for nodes 2/3 ARE decided (operator, 2026-08-31 — infra/PROD-PROVISIONING.md
-# §0), but the nodes themselves are NOT yet racked/imaged/reachable. Left commented so
-# no play can accidentally target a host that isn't there; uncomment each line only once
-# that node is actually on the bench and answering SSH.
-# k3s-prod-2 ansible_host=192.168.2.11 ansible_port=22 k3s_node_ip=192.168.2.11
+# Uncomment a node only once it is actually on the bench and answering SSH, so no play can
+# target a host that isn't there. k3s-prod-2 came online 2026-09-01 (imaged identically to
+# node 1: same HP EliteDesk 800 G5 Mini, same BIOS R21 02.26.00, same i7-9700T, same
+# partition layout) but with a SAMSUNG PM9A1 NVMe instead of node 1's 2011 SATA C400 — the
+# nodes are NOT hardware-symmetric, which matters for the §2 Longhorn/etcd disk decision.
+# node 3 remains commented until it is racked.
+k3s-prod-2 ansible_host=192.168.2.11 ansible_port=22 k3s_node_ip=192.168.2.11
 # k3s-prod-3 ansible_host=192.168.2.12 ansible_port=22 k3s_node_ip=192.168.2.12
 
 # Umbrella group group_vars/k3s_prod/ attaches to (mirrors dev's [k3s_servers:children]