docs(prod): fill in node-2 inventory; drop stale investigate bullets

Records node 2's as-found hardware alongside node 1 and removes two bullets that my earlier edit left duplicated/obsolete (the BIOS comparison is done; clear-CMOS was listed twice). Makes the hardware ASYMMETRY explicit in the table rather than buried in prose: node 1 is a ~2011 Micron C400 SATA SSD at 69% life with 15 grown bad blocks and 187 erase failures; node 2 is a Samsung PM9A1 NVMe at 96% life, PASSED. Same chassis, same BIOS, same CPU, same partition layout — very different storage. §2 requires an identical disk layout across all three nodes because Longhorn replica placement assumes symmetry, so this belongs in the inventory where the disk decision will be made. Serves: R-ENV-03. Task: T-7.1.
docs(prod): CORRECTION — BIOS attributes are read-only in practice, not writable
2026-09-01 21:45:37 -05:00 · 2026-09-01 21:45:15 -05:00 · 2026-09-01 21:04:12 -05:00 · 2026-09-01 20:56:58 -05:00 · 2026-09-02 00:24:57 +00:00 · 2026-09-01 19:23:09 -05:00
38 changed files with 4185 additions and 95 deletions
@@ -1496,3 +1496,265 @@ thing that ever closes a requirement.
  chart default rather than set explicitly — see the follow-up in `platform/longhorn/`.
 - L2/L3 conformance still SKIPs in CI (`docs/plans/l2-l3-conformance-ci-wiring.md`); it needs
  the trigger-credential decision — a scoped in-cluster SA, never a broad kubeconfig in CI.
+
+---
+
+## 2026-09-01 — INCIDENT: merging PR #4 briefly broke Cilium on 2/3 dev nodes. **Root cause: a substitution race that fails OPEN.**
+
+Merging the R-ENV-02 tokenization (PR #4, `dce0e8f`) triggered a Cilium Helm upgrade that put
+`cilium` agents into `Init:Error` on `k3s-dev-1` and `k3s-dev-2`. It **self-healed in ~6 minutes**
+and the cluster is fully green (12/12 Kustomizations Ready, 0 HelmReleases unready, 0 pods down).
+Recording it because the mechanism is systemic, will recur, and is far more dangerous on a cold
+prod bootstrap than it was here.
+
+### What happened
+
+The HelmRelease config digest tells the whole story:
+
+```
+v8   05:49:39  digest e83bf695…      <- before
+v9   05:50:11  digest eebd6c88…      <- the bad render
+v10  05:55:23  digest e83bf695…      <- identical to v8 again
+```
+
+The config changed and then changed **back to byte-identical**. Nothing in git differed
+semantically — `git diff` over `platform/cilium/helmrelease.yaml` shows only comments plus
+`k8sServiceHost: "192.168.1.50"` → `k8sServiceHost: "${K3S_API_HOST}"`, and the dev overlay sets
+`K3S_API_HOST=192.168.1.50`. The pre-merge byte-identity verification was **correct**; the steady
+state is identical. The damage happened in a transient intermediate state.
+
+### Root cause — the var and its consumer are reconciled by DIFFERENT Kustomizations
+
+- `cluster-vars` (which *defines* `K3S_API_HOST`) is owned by the **`flux-system`** Kustomization.
+- `platform/cilium/helmrelease.yaml` (which *references* it) is owned by the **`platform`**
+  Kustomization, via `postBuild.substituteFrom: cluster-vars`.
+- There is **no dependency ordering between defining a variable and using it.**
+
+So there is a window where `platform` renders the NEW manifest against the OLD `cluster-vars`,
+which has no `K3S_API_HOST` key yet. **Flux's post-build substitution is non-strict by default: an
+undefined variable becomes the EMPTY STRING, silently.** That produced `k8sServiceHost: ""`, Helm
+upgraded Cilium with it, and the agents fell back to the in-cluster ClusterIP `10.43.0.1:443` —
+which only the Cilium agent itself can translate. The agent was the thing restarting, so its own
+`config` init container could not reach the API server:
+
+```
+level=error msg="Unable to contact k8s api-server" ipAddr=https://10.43.0.1:443
+  error="dial tcp 10.43.0.1:443: i/o timeout"
+level=fatal msg="Build config failed"
+```
+
+Once `flux-system` applied the updated `cluster-vars`, the next `platform` reconcile rendered the
+correct value, digest returned to `e83bf695…`, and all three agents came up.
+
+`optional: false` on the `substituteFrom` entry does **not** protect against this — it only requires
+the ConfigMap to *exist*, not that every referenced key is defined.
+
+### Why this matters much more for prod
+
+On dev, one Cilium agent (`k3s-dev-3`) stayed up throughout, the API server was reachable, and the
+race closed on its own. **On a cold prod bootstrap every one of these knobs is new simultaneously**,
+there is no already-running CNI to fall back on, and an empty `k8sServiceHost` means Cilium may
+never come up at all — with no healthy peer to recover from. This is a plausible
+bring-up-blocker for `clusters/prod`.
+
+### The fix — make substitution FAIL CLOSED
+
+`kustomize-controller` currently runs with **no** `--feature-gates` argument, i.e. non-strict
+substitution. Flux supports `StrictPostBuildSubstitutions`, which makes an **undefined variable fail
+the Kustomization** instead of silently emptying it. That is exactly this project's stated doctrine
+("if unsure, deny/close"; "never fake green") applied to the substitution layer, and it converts
+this entire bug class from *silently corrupt a critical value* into *a loud, blocking reconcile
+failure*.
+
+**Not enabled unilaterally** — turning it on cluster-wide would immediately fail any Kustomization
+that references a variable not defined in `cluster-vars`, including legitimate shell `${…}` in
+embedded scripts. The safe sequence, before flipping it:
+1. Enumerate every `${VAR}` in every substituted path and prove each is either defined in
+   `cluster-vars` or correctly escaped as `$${VAR}`.
+2. Then enable the gate, and let CI + a dev reconcile prove it.
+
+Interim discipline, independent of the gate: **add a `cluster-vars` knob in one commit and
+reference it in a later one**, so the definition is always reconciled before its first use.
+
+### Operational note worth keeping
+
+A Cilium rolling upgrade on this cluster is not risk-free even when the values are right: the
+`config` init container resolves the API server through the ClusterIP unless `k8sServiceHost` is
+set, and the agent that translates that ClusterIP is the one being replaced. Keep
+`k8sServiceHost`/`k8sServicePort` correct at all times, and roll Cilium one node at a time.
+
+---
+
+## 2026-09-01 — RESEARCH: Flux substitution + HelmRelease best practice. **Measured semantics + ranked plan.**
+
+Three parallel research passes (substitution/ordering, HelmRelease/CNI, and a full repo audit),
+prompted by the incident above. Two of my own earlier conclusions were WRONG and are corrected
+here. Everything below marked *measured* was run against flux 2.4.0 / the live cluster; everything
+else is cited inference.
+
+### THE SUBSTITUTION SEMANTICS TABLE (measured — trust this over prose elsewhere)
+
+| form | behaviour |
+|---|---|
+| `${DEFINED}` | substituted |
+| `${UNDEFINED}` | **silently empty** (non-strict) · fails loudly (strict) |
+| `${UNDEFINED:-d}` | **default applied at reconcile time — `--strict` does NOT catch it** |
+| `${VAR:?msg}` | renders **the message as the value** — a non-empty WRONG value. ANTI-PATTERN. |
+| `${VAR:=192.168.1.50}` | silently ships the dev value to prod. ANTI-PATTERN. |
+| `$${VAR}` / `$${VAR:-d}` / `$${ARR[0]}` | literal — **escaping is TOTAL** |
+| `$VAR` / `$(cmd)` | untouched, no escaping needed |
+| `${...}` / `${a b}` / `${ARR[0]}` unescaped | **hard parse error — fails the whole Kustomization** |
+
+Flux exempts default-providing operators (`-`, `:-`, `+`, `:+`, `=`, `:=`, `?`, `:?`) from strict
+mode by design ("they intentionally handle the unset case"). **That is why strict mode would never
+have caught the gitea/nextcloud dead-guard bug**, and why a targeted check was required.
+
+**Doctrine corrected:** `clusters/base/apps-vms.yaml` claimed an indexed expansion is fatal
+"escaped or not". Measured: escaping is total; only the UNESCAPED form is fatal. Fixed in place.
+
+**Comment nuance:** `kustomize build` strips *structural* YAML comments before envsubst sees them,
+so those are usually harmless. But `#` lines INSIDE a block scalar are data and DO reach envsubst,
+and a `$`-carrying body comment was observed surviving into built `apps/wave-1`. Do not rely on
+stripping — escape in comments too. (An earlier claim in this log that a YAML comment "nearly broke
+every merge" was overstated for the structural case; the hazard is real for block-scalar bodies.)
+
+### CORRECTION 1 (mine) — `StrictPostBuildSubstitutions` alone is INSUFFICIENT
+
+It fixes nothing about ordering; it converts "render a corrupt value and ship it" into "fail loudly
+and keep last-good". **The actual ordering fix is one line**, verified against
+`kustomization_controller.go :: checkDependencies` at our exact version (v1.4.0): `dependsOn` is
+**revision-gated**, not merely Ready-gated — when the dependency shares a GitRepository, the
+dependent cannot reconcile revision N until the dependency has APPLIED revision N.
+
+`platform` is the only Kustomization in the graph with no `dependsOn`; every other consumer chains
+transitively through it. So:
+
+```yaml
+# clusters/base/platform.yaml
+spec:
+  dependsOn:
+    - name: flux-system     # cluster-vars must be applied at THIS revision first
+```
+
+**Cost, recorded honestly:** the root becomes a gate — a malformed manifest anywhere under
+`clusters/dev` now stops the whole graph where today it would not. Fail-closed, consistent with
+doctrine, but a real blast-radius change. No deadlock risk: the root runs `wait: false`.
+
+Rejected alternative: moving `cluster-vars` into the consuming Kustomization is **strictly worse** —
+`SubstituteVariables` reads the ConfigMap from the API at build time, *before* the Kustomization
+applies its own resources, so it would always read the PREVIOUS value. That converts an occasional
+race into a permanent one-reconcile lag.
+
+### CORRECTION 2 (an agent's) — the safety machinery DID fire
+
+A research pass concluded that Helm considered the bad release healthy (because
+`updateStrategy.rollingUpdate.maxUnavailable: 2` on 3 nodes means `expectedReady = 1`), and
+therefore remediation never engaged. **Measured on the live cluster: that is wrong.** The Helm
+release secrets show **v9 = `failed`**; Helm's wait DID fail and the release was remediated, which
+is why it self-healed. `maxUnavailable: 2 of desired 3` IS confirmed live — so the real harm was
+blast radius (2 of 3 agents down at once), not a missed detection.
+
+### Verified, and worth knowing
+
+- **Flux 2.4.0 is OUT OF SUPPORT** — the project supports the last three minors; 2.9.x is current.
+- **Strict substitution became DEFAULT-ON** in kustomize-controller v1.9.0. So upgrading Flux flips
+  this behaviour whether or not we opt in — the variable audit is a prerequisite for the upgrade
+  regardless of today's decision.
+- **Cilium's `values.schema.json` permits `k8sServiceHost: ""`** — no `minLength`, no `pattern`.
+  Helm was never going to reject the bad render.
+- **Cilium docs make `k8sServiceHost` REQUIRED under kube-proxy replacement**, precisely because the
+  environment exports the API ClusterIP and there is no kube-proxy to provision it.
+- **The Cilium chart ships zero test templates**, so `spec.test` is useless for it. A post-upgrade
+  check must live outside Helm.
+- `valuesFrom` fails HARD on a missing key (verified in `chartutil/values.go`) unlike postBuild's
+  silent empty — but only on a MISSING key, not an empty value, and it cannot cross namespaces
+  (`cluster-vars` is in `flux-system`; the Cilium HelmRelease is in `kube-system`).
+- **Do NOT enable `driftDetection.mode: enabled` on a CNI.** It compares the cluster against the
+  Helm storage manifest — during the incident that manifest WAS the bad render, so drift correction
+  would have actively re-asserted the broken value.
+
+### RANKED PLAN
+
+| P | Action | State |
+|---|---|---|
+| **P0** | `platform.dependsOn: [flux-system]` — closes the race completely | **PENDING — operator call** (blast-radius change) |
+| **P0** | Escape the dead OIDC guards; renderer now refuses the class | ✅ DONE |
+| **P1** | Substitution-safety L0 gate, unconditional in `ci/l0.sh` | ✅ DONE — 102 assertions |
+| **P1** | Enable `StrictPostBuildSubstitutions=true` | **READY — proven safe**, all 11 paths exit 0 under `flux envsubst --strict`. Sequence AFTER P0. |
+| **P2** | `updateStrategy.rollingUpdate.maxUnavailable: 1` on Cilium, as a new **[parity]** field in BOTH the HelmRelease and the Ansible j2 | PENDING — bounds blast radius to one node |
+| **P3** | Split Cilium into its own Kustomization (`wait: true`, `interval: 1h`, `timeout: 10m`); `platform` dependsOn it | PENDING — gives `flux suspend kustomization cilium` as an emergency valve |
+| **P4** | Upgrade Flux 2.4.0 → 2.9.x | PENDING — out of support; brings strict-by-default |
+| **P5** | Cilium MINOR bumps become manual (Renovate PR → human runs the documented pre-flight → merge). Never automerge a CNI minor. | PENDING — process |
+| — | Record `${VAR:?}` / `${VAR:=}` as anti-patterns | ✅ DONE (table above) |
+| — | *Not recommended*: drift detection on Cilium; `spec.test` on Cilium; `k8sServiceHost: auto` | — |
+
+### Follow-ups surfaced, not yet actioned
+- 6 dead `cluster-vars` knobs; `BASE_DOMAIN` and `CLUSTER_ENV` look like genuine rot.
+- `platform/{cilium,longhorn,velero,oauth2-proxy}/values.yaml` reference mirrors carry decorative
+  `${...}` that can silently drift from the real HelmRelease.
+- `platform` Kustomization `timeout: 5m` vs Longhorn HelmRelease `timeout: 15m` — the tier can time
+  out while a legitimate Longhorn upgrade is still running.
+
+---
+
+## 2026-09-01 — P0/P1/P2 LANDED + a second incident: two bugs stacked, the outer one hid the inner
+
+All three approved changes are merged (PR #5) and reconciled on dev, plus a hotfix (PR #6).
+
+### Landed and verified on the live cluster
+
+| Change | Verified |
+|---|---|
+| **P0** `platform.dependsOn: [flux-system]` | Flux on `63002d1`; all 12 Kustomizations Ready; steady-state graph unchanged |
+| **P1** strict substitution | Committed to `bootstrap/flux/components/`. **NOT YET ROLLED OUT** — see below |
+| **P2** Cilium `maxUnavailable: 1` | Applied. **Pod ages unchanged (15h/39h), restart counts unchanged** — the clean proof nothing rolled, exactly as predicted |
+| OIDC guard fix | Deployed guards now read `${..._OIDC_CLIENT_SECRET:-}` instead of `""`; both providers registered |
+| Prod overlay | SOPS decryption (same age key as dev) + source on `main` |
+
+### THE SECOND INCIDENT — nextcloud CrashLoopBackOff
+
+Immediately after the PR #5 reconcile, `nextcloud` went `CrashLoopBackOff` (7 restarts,
+`FailedPostStartHook`) and `apps-wave-1`/`apps-wave-2` stalled. Cause:
+
+```sh
+[ "$p" -ge 15 ] && nextcloud_oidc_fail "could not promote ... after retries"   # LAST line of the hook
+```
+
+On the **success** path (`p < 15`) the test returns 1, and as the script's last command that became
+the hook's exit status. **A non-zero postStart exit makes the kubelet kill the container.**
+
+**The previous commit did not introduce this — it UNCOVERED it.** The bug was unreachable for as
+long as the OIDC guard above it was dead code that `exit 0`'d first. Fixing the guard made the block
+execute for the first time in these apps' deployed lifetime, and the latent defect fired instantly.
+**Two bugs stacked, and the outer one hid the inner one.** Worth remembering as a pattern: fixing
+dead code is not a safe no-op — it is the first execution of never-tested code, and should be
+treated with the caution of new code, not of a one-character escape.
+
+Fixed by converting to a plain `if` and adding an explicit `exit 0`. Gitea's hook already returned 0
+on both paths, but only by accident of which statement happened to be last — made explicit there too
+so the class cannot return. Recovery confirmed: both pods `1/1 Running`, 0 restarts, all
+Kustomizations Ready, both OIDC providers still registered.
+
+### STILL TO DO — strict substitution is committed but NOT ACTIVE
+
+`StrictPostBuildSubstitutions` does **not** arrive on a git push. This repo does not use
+`flux bootstrap`; the controllers were installed imperatively by `flux install` and carry no Flux
+ownership labels, so they are outside Flux's inventory and nothing under `clusters/**` can reach a
+controller flag. An operator must run `bootstrap/flux/bootstrap.sh` step 1 (idempotent; the
+standalone command is in `bootstrap/flux/README.md`), which restarts kustomize-controller for
+~10-20s. Flux is level-triggered, so an interrupted reconcile is simply retried.
+
+**Ordering is satisfied:** P0 is merged and reconciled, so the gate can now be rolled out safely.
+With the gate on but the ordering edge absent, the same race would turn a transient empty render
+into a transient hard Kustomization failure.
+
+### Prod consequences recorded this session
+
+- **Every merge to `main` will reconcile BOTH clusters** once prod is live — no promotion step, no
+  soak window. A deliberate consequence of dev being temporary, but it removes the "prove it on dev
+  first" safety net that the last two days have leaned on heavily, twice.
+- **Gitea migration is the FIRST task of the dev decommission, not the last.** Prod's GitOps source
+  currently points at Gitea running on the dev cluster.
+- **Prod's source URL cannot work on a cold prod cluster** — split-horizon answers the whole zone
+  with `${GATEWAY_VIP}`, so prod would resolve `gitea.home.keithjackson.dev` to its own gateway.
+  Bring-up needs a temporary source and a cutover, as `docs/05` describes for dev's own Phase-6.
@@ -92,10 +92,13 @@ spec:
            # NOTE: apps-vms NOW carries postBuild.substituteFrom cluster-vars (needed for
            # ${UNIFI_L4_VIP} in 50-service-l4.yaml), so Flux envsubst DOES run over this userData.
            # Every shell brace-expansion below is therefore escaped as $${...}, which envsubst emits
-            # as a literal ${...} — verified with `flux envsubst`. Bare $VAR and $(...) are left alone
-            # by envsubst and need no escaping. NEVER write an unescaped ${...} here, and never write
-            # ${ARR[0]} even escaped-adjacent: envsubst hard-fails on `[` ("missing closing brace")
-            # and would break the whole apps-vms apply.
+            # as a literal $${...} — verified with `flux envsubst`. Bare $VAR and $(...) are left alone
+            # by envsubst and need no escaping. NEVER write an unescaped $${...} here, and never write
+            # an INDEXED expansion unescaped: envsubst hard-fails on `[` ("missing closing brace")
+            # and would break the whole apps-vms apply. CORRECTION (2026-09-01, measured against
+            # flux 2.4.0 `envsubst --strict`): escaping IS total — $${ARR[0]} emits the literal
+            # text safely. Only the UNESCAPED indexed form is fatal. The earlier "escaped or not"
+            # wording in clusters/base/apps-vms.yaml overstated it.
            userData: |-
              #cloud-config
              hostname: unifi
@@ -27,7 +27,7 @@
 # VIP: ${UNIFI_L4_VIP} (cluster-vars, R-ENV-02; dev 192.168.1.54, confirmed free, inside
 # default-pool and reserved in tofu — the Gateway already holds the pool's first IP, dev .53).
 # Substituted by the `apps-vms` Flux Kustomization, which carries postBuild.substituteFrom for
-# exactly this token; every shell ${...} in 30-virtualmachine.yaml's cloud-init is escaped as $${...}
+# exactly this token; every shell $${...} in 30-virtualmachine.yaml's cloud-init is escaped as $${...}
 # accordingly. A new environment MUST set UNIFI_L4_VIP to a free address in ITS pool.
 #
 # REUSABLE PATTERN (the deferred `minecraft` :25565/L4 problem is the same shape): expose an
@@ -127,8 +127,8 @@ spec:
              command:
              - /bin/sh
              - -c
-              - "# Idempotent break-glass admin bootstrap. Runs alongside the gitea entrypoint\n# (which, with INSTALL_LOCK=true, headless-installs + migrates the DB on first\n# boot). Waits for the DB, then creates the admin only if it does not exist.\nset -u\nexport HOME=/data/git\ni=0\nuntil su-exec git gitea admin user list >/dev/null 2>&1; do\n  i=$((i + 1))\n  [ \"$i\" -ge 150 ] && { echo \"[gitea-bootstrap] DB not ready after wait; skipping\" >&2; exit 0; }\n  sleep 2\ndone\nif su-exec git gitea admin user list --admin 2>/dev/null | awk 'NR>1{print $2}' | grep -qx \"$GITEA_ADMIN_USERNAME\"; then\n  echo \"[gitea-bootstrap] admin '$GITEA_ADMIN_USERNAME' already present\"\nelse\n  n=0\n  until su-exec git gitea admin user create \\\n    --username \"$GITEA_ADMIN_USERNAME\" \\\n    --password \"$GITEA_ADMIN_PASSWORD\" \\\n    --email \"[email protected]\" \\\n    --admin --must-change-password=false; do\n    n=$((n + 1))\n    [ \"$n\" -ge 10 ] && { echo \"[gitea-bootstrap] admin create failed after retries\" >&2; break; }\n    sleep 3\n  done\n  echo \"[gitea-bootstrap] created break-glass admin '$GITEA_ADMIN_USERNAME'\"\nfi\n# --- Keycloak OIDC login source (idempotent add-or-update; R-IDP-02/06) ---\n# Registers the confidential `gitea` client as the OAuth2 login source \"keycloak\" against the\n# homelab realm's discovery doc. The `groups` claim maps platform-admins -> Gitea admin\n# (--admin-group). Missing secret => skip (break-glass admin still works), so an unfilled\n# secret never crashes the pod.\n#\n# HARDENED (was a silent first-boot RACE): this step used to fire before the app/network was\n# ready and swallow its failure (|| echo ... >&2, exit 0), so SSO silently never registered.\n# Now it (1) waits \u2014 bounded, ~90s \u2014 for the Keycloak discovery doc to serve HTTP 200,\n# (2) registers (update-in-place if present, else create), (3) VERIFIES the source actually\n# persisted and retries the whole cycle, and (4) on give-up logs LOUDLY to stderr AND a marker\n# file on the persistent /data volume WITHOUT crashlooping the pod (break-glass admin stays\n# usable). The verify-then-retry loop is the real guarantee against \"exit 0 but nothing stuck\".\nGITEA_DISCOVERY_URL=https://keycloak.home.keithjackson.dev/realms/homelab/.well-known/openid-configuration\ngitea_oidc_fail() {\n  echo \"[gitea-oidc] FAILED to register 'keycloak' login source: $1\" >&2\n  { echo \"$(date -u +%Y-%m-%dT%H:%M:%SZ) [gitea-oidc] FAILED: $1\"; } >> /data/gitea-oidc-bootstrap.log 2>/dev/null || true\n}\nif [ -z \"${GITEA_OIDC_CLIENT_SECRET:-}\" ]; then\n  echo \"[gitea-oidc] GITEA_OIDC_CLIENT_SECRET unset; skipping OIDC source (break-glass admin only)\"\nelse\n  # (1) Wait up to ~90s for the Keycloak discovery doc to be reachable (HTTP 200).\n  d=0; disc_ok=0\n  while [ \"$d\" -lt 45 ]; do\n    if [ \"$(curl -sS -o /dev/null -w '%{http_code}' --max-time 5 \"$GITEA_DISCOVERY_URL\" 2>/dev/null)\" = \"200\" ]; then\n      disc_ok=1; break\n    fi\n    d=$((d + 1)); sleep 2\n  done\n  [ \"$disc_ok\" = 1 ] || gitea_oidc_fail \"Keycloak discovery endpoint not reachable (HTTP 200) within timeout\"\n  # (2)+(3) Register (update-in-place or create) then VERIFY it persisted; retry the whole cycle.\n  r=0; reg_ok=0\n  while [ \"$r\" -lt 10 ]; do\n    oidc_id=$(su-exec git gitea admin auth list 2>/dev/null | awk '$2==\"keycloak\"{print $1; exit}')\n    if [ -n \"$oidc_id\" ]; then\n      su-exec git gitea admin auth update-oauth --id \"$oidc_id\" \\\n        --name keycloak --provider openidConnect --key gitea \\\n        --secret \"$GITEA_OIDC_CLIENT_SECRET\" \\\n        --auto-discover-url \"$GITEA_DISCOVERY_URL\" \\\n        --scopes \"openid email profile\" --group-claim-name groups --admin-group platform-admins >/dev/null 2>&1 || true\n    else\n      su-exec git gitea admin auth add-oauth \\\n        --name keycloak --provider openidConnect --key gitea \\\n        --secret \"$GITEA_OIDC_CLIENT_SECRET\" \\\n        --auto-discover-url \"$GITEA_DISCOVERY_URL\" \\\n        --scopes \"openid email profile\" --group-claim-name\
-                \ groups --admin-group platform-admins >/dev/null 2>&1 || true\n    fi\n    # VERIFY: the \"keycloak\" source must actually be listed now (guards the exit-0-but-nothing-persisted race).\n    if su-exec git gitea admin auth list 2>/dev/null | awk '$2==\"keycloak\"{f=1} END{exit !f}'; then\n      reg_ok=1; break\n    fi\n    r=$((r + 1)); sleep 3\n  done\n  if [ \"$reg_ok\" = 1 ]; then\n    echo \"[gitea-oidc] login source 'keycloak' registered and verified\"\n  else\n    gitea_oidc_fail \"add/update-oauth ran but the 'keycloak' source did not persist after retries\"\n  fi\nfi\n"
+              - "# Idempotent break-glass admin bootstrap. Runs alongside the gitea entrypoint\n# (which, with INSTALL_LOCK=true, headless-installs + migrates the DB on first\n# boot). Waits for the DB, then creates the admin only if it does not exist.\nset -u\nexport HOME=/data/git\ni=0\nuntil su-exec git gitea admin user list >/dev/null 2>&1; do\n  i=$((i + 1))\n  [ \"$i\" -ge 150 ] && { echo \"[gitea-bootstrap] DB not ready after wait; skipping\" >&2; exit 0; }\n  sleep 2\ndone\nif su-exec git gitea admin user list --admin 2>/dev/null | awk 'NR>1{print $2}' | grep -qx \"$GITEA_ADMIN_USERNAME\"; then\n  echo \"[gitea-bootstrap] admin '$GITEA_ADMIN_USERNAME' already present\"\nelse\n  n=0\n  until su-exec git gitea admin user create \\\n    --username \"$GITEA_ADMIN_USERNAME\" \\\n    --password \"$GITEA_ADMIN_PASSWORD\" \\\n    --email \"[email protected]\" \\\n    --admin --must-change-password=false; do\n    n=$((n + 1))\n    [ \"$n\" -ge 10 ] && { echo \"[gitea-bootstrap] admin create failed after retries\" >&2; break; }\n    sleep 3\n  done\n  echo \"[gitea-bootstrap] created break-glass admin '$GITEA_ADMIN_USERNAME'\"\nfi\n# --- Keycloak OIDC login source (idempotent add-or-update; R-IDP-02/06) ---\n# Registers the confidential `gitea` client as the OAuth2 login source \"keycloak\" against the\n# homelab realm's discovery doc. The `groups` claim maps platform-admins -> Gitea admin\n# (--admin-group). Missing secret => skip (break-glass admin still works), so an unfilled\n# secret never crashes the pod.\n#\n# HARDENED (was a silent first-boot RACE): this step used to fire before the app/network was\n# ready and swallow its failure (|| echo ... >&2, exit 0), so SSO silently never registered.\n# Now it (1) waits \u2014 bounded, ~90s \u2014 for the Keycloak discovery doc to serve HTTP 200,\n# (2) registers (update-in-place if present, else create), (3) VERIFIES the source actually\n# persisted and retries the whole cycle, and (4) on give-up logs LOUDLY to stderr AND a marker\n# file on the persistent /data volume WITHOUT crashlooping the pod (break-glass admin stays\n# usable). The verify-then-retry loop is the real guarantee against \"exit 0 but nothing stuck\".\nGITEA_DISCOVERY_URL=https://keycloak.home.keithjackson.dev/realms/homelab/.well-known/openid-configuration\ngitea_oidc_fail() {\n  echo \"[gitea-oidc] FAILED to register 'keycloak' login source: $1\" >&2\n  { echo \"$(date -u +%Y-%m-%dT%H:%M:%SZ) [gitea-oidc] FAILED: $1\"; } >> /data/gitea-oidc-bootstrap.log 2>/dev/null || true\n}\n# NOTE the `$$` escape below \u2014 it is load-bearing. apps-wave-0 declares postBuild.\n# substituteFrom cluster-vars, so Flux envsubst rewrites this whole manifest at RECONCILE\n# time, before any container runs. Written unescaped, `$${GITEA_OIDC_CLIENT_SECRET:-}` is not\n# a cluster-var, so envsubst blanked it and the guard reconciled as `[ -z \"\" ]` \u2014 ALWAYS TRUE\n# \u2014 making every line below (discovery wait, add/update-oauth, verify-then-retry) DEAD CODE on\n# every boot since 8738871 (2026-08-27). SSO kept working only because the login source was\n# already in the DB; a PVC rebuild or fresh cluster would have come up with NO OIDC at all.\n# Flux STRICT substitution cannot catch this \u2014 it EXEMPTS default-operator forms by design.\n# `$${VAR}` is the escape: envsubst emits it back as a plain brace expansion for the shell.\n# Bare `$VAR` and `$(cmd)` are left alone and need NO escaping \u2014 which is why the\n# `$GITEA_OIDC_CLIENT_SECRET` uses below always worked and only the guards broke.\n# Contract: clusters/base/apps-vms.yaml. Enforced at render time by catalog/render.py.\nif [ -z \"$${GITEA_OIDC_CLIENT_SECRET:-}\" ]; then\n  echo \"[gitea-oidc] GITEA_OIDC_CLIENT_SECRET unset; skipping OIDC source (break-glass admin only)\"\nelse\n  # (1) Wait up to ~90s for the Keycloak discovery doc to be reachable (HTTP 200).\n  d=0; disc_ok=0\n  while [ \"$d\" -lt 45 ]; do\n    if [ \"$(curl -sS -o /dev/null -w '%{http_code}' --max-time 5 \"$GITEA_DISCOVERY_URL\" 2>/dev/null)\" = \"200\" ]; then\n      disc_ok=1;\
+                \ break\n    fi\n    d=$((d + 1)); sleep 2\n  done\n  [ \"$disc_ok\" = 1 ] || gitea_oidc_fail \"Keycloak discovery endpoint not reachable (HTTP 200) within timeout\"\n  # (2)+(3) Register (update-in-place or create) then VERIFY it persisted; retry the whole cycle.\n  r=0; reg_ok=0\n  while [ \"$r\" -lt 10 ]; do\n    oidc_id=$(su-exec git gitea admin auth list 2>/dev/null | awk '$2==\"keycloak\"{print $1; exit}')\n    if [ -n \"$oidc_id\" ]; then\n      su-exec git gitea admin auth update-oauth --id \"$oidc_id\" \\\n        --name keycloak --provider openidConnect --key gitea \\\n        --secret \"$GITEA_OIDC_CLIENT_SECRET\" \\\n        --auto-discover-url \"$GITEA_DISCOVERY_URL\" \\\n        --scopes \"openid email profile\" --group-claim-name groups --admin-group platform-admins >/dev/null 2>&1 || true\n    else\n      su-exec git gitea admin auth add-oauth \\\n        --name keycloak --provider openidConnect --key gitea \\\n        --secret \"$GITEA_OIDC_CLIENT_SECRET\" \\\n        --auto-discover-url \"$GITEA_DISCOVERY_URL\" \\\n        --scopes \"openid email profile\" --group-claim-name groups --admin-group platform-admins >/dev/null 2>&1 || true\n    fi\n    # VERIFY: the \"keycloak\" source must actually be listed now (guards the exit-0-but-nothing-persisted race).\n    if su-exec git gitea admin auth list 2>/dev/null | awk '$2==\"keycloak\"{f=1} END{exit !f}'; then\n      reg_ok=1; break\n    fi\n    r=$((r + 1)); sleep 3\n  done\n  if [ \"$reg_ok\" = 1 ]; then\n    echo \"[gitea-oidc] login source 'keycloak' registered and verified\"\n  else\n    gitea_oidc_fail \"add/update-oauth ran but the 'keycloak' source did not persist after retries\"\n  fi\nfi\n# A postStart hook MUST exit 0 \u2014 a non-zero exit makes the kubelet KILL the container\n# (FailedPostStartHook -> CrashLoopBackOff). This hook already ends 0 on both paths, but\n# it is made EXPLICIT so the guarantee does not depend on whatever statement happens to\n# be last. nextcloud's equivalent hook did depend on that and crashlooped on 2026-09-01,\n# the moment its OIDC guard was fixed and the block actually ran for the first time.\nexit 0\n"
      volumes:
      - name: data
        persistentVolumeClaim:
@@ -125,8 +125,9 @@ spec:
              command:
              - /bin/sh
              - -c
-              - "# Idempotent Keycloak OIDC wiring (R-IDP-02/06). Runs alongside the nextcloud entrypoint\n# (which installs/upgrades on first boot). Installs+enables the user_oidc app and creates OR\n# updates the \"keycloak\" login provider (occ user_oidc:provider is create-or-update by\n# identifier). Auto-discovery pulls the realm's endpoints; the `groups` claim drives Nextcloud\n# group provisioning. occ runs as www-data (owns config.php); the client secret is passed via\n# --clientsecret-env so it never lands on a command line. Safe to re-run every start; a missing\n# secret or not-yet-installed instance is skipped so the pod never crashloops (the local\n# break-glass admin still works).\nset -u\n# OCC runs occ as www-data (owns config.php). NOTE: this wrapper word-splits its args via $*,\n# so it is used ONLY for single-token subcommands (status/app:list/app:install/...). The\n# provider call below carries a MULTI-WORD value (--scope 'openid email profile') and is run as\n# ONE su -c with the scope single-quoted, so the inner shell keeps it a single argument.\nOCC() { su -s /bin/sh www-data -c \"php /var/www/html/occ $*\"; }\nNEXTCLOUD_DISCOVERY_URL=https://keycloak.home.keithjackson.dev/realms/homelab/.well-known/openid-configuration\nnextcloud_oidc_fail() {\n  echo \"[nextcloud-oidc] FAILED to configure 'keycloak' provider: $1\" >&2\n  { echo \"$(date -u +%Y-%m-%dT%H:%M:%SZ) [nextcloud-oidc] FAILED: $1\"; } >> /var/www/html/nextcloud-oidc-bootstrap.log 2>/dev/null || true\n}\n# (a) Wait for the instance to be installed AND out of maintenance mode. The entrypoint holds\n#     maintenance mode during first-boot install/upgrade; occ writes made in that window do not\n#     stick \u2014 a second race on top of the quoting bug fixed at (c).\ni=0\nuntil OCC status 2>/dev/null | grep -q \"installed: true\" && ! OCC status 2>/dev/null | grep -q \"maintenance: true\"; do\n  i=$((i + 1))\n  [ \"$i\" -ge 300 ] && { echo \"[nextcloud-oidc] occ not ready (installed/maintenance) after wait; skipping\" >&2; exit 0; }\n  sleep 2\ndone\n# Let Nextcloud's OWN server-side HTTP client reach the private-network IdP. The Keycloak\n# FQDN resolves (split-horizon) to the PRIVATE Cilium gateway VIP (RFC1918), and Nextcloud's\n# SSRF guard otherwise REFUSES that request \u2014 OCP\\Http\\Client\\LocalServerException \"violates\n# local access rules\" \u2014 during user_oidc's discovery/JWKS/token fetch AT LOGIN, surfacing to\n# the user as \"Could not reach the provider\". (The (b) curl check below uses system libcurl,\n# NOT this guard, so it passes while the browser login still failed.) Idempotent; re-applied\n# every start so it survives pod rolls / PVC rebuilds. Confirmed root cause 2026-08-27.\nOCC config:system:set allow_local_remote_servers --value=true --type=boolean >/dev/null 2>&1 \\\n  || echo \"[nextcloud-oidc] WARN: failed to set allow_local_remote_servers\" >&2\nif [ -z \"${NEXTCLOUD_OIDC_CLIENT_SECRET:-}\" ]; then\n  echo \"[nextcloud-oidc] client secret unset; skipping OIDC (break-glass admin only)\"\n  exit 0\nfi\nif ! OCC app:list 2>/dev/null | grep -q \"user_oidc\"; then\n  OCC app:install user_oidc || echo \"[nextcloud-oidc] app:install user_oidc failed\" >&2\nfi\nOCC app:enable user_oidc >/dev/null 2>&1 || true\n# (b) Wait up to ~90s for the Keycloak discovery doc to be reachable (HTTP 200) before registering.\nd=0; disc_ok=0\nwhile [ \"$d\" -lt 45 ]; do\n  if [ \"$(curl -sS -o /dev/null -w '%{http_code}' --max-time 5 \"$NEXTCLOUD_DISCOVERY_URL\" 2>/dev/null)\" = \"200\" ]; then\n    disc_ok=1; break\n  fi\n  d=$((d + 1)); sleep 2\ndone\n[ \"$disc_ok\" = 1 ] || nextcloud_oidc_fail \"Keycloak discovery endpoint not reachable (HTTP 200) within timeout\"\n# (c) Configure (create-or-update by identifier) then VERIFY it persisted; retry the whole cycle.\n#     HARDENED: run as ONE su -c so www-data's shell parses --scope='openid email profile' as a\n#     single argument. The previous `OCC user_oidc:provider ... --scope=\"openid email profile\"`\n#     form fed the value back through the wrapper's $*, which SPLIT it into extra\
-                \ positionals ->\n#     occ \"Too many arguments\" -> silent failure on EVERY boot. Secret via --clientsecret-env\n#     (never on argv). The verify-then-retry loop guarantees the provider actually persisted.\nr=0; reg_ok=0\nwhile [ \"$r\" -lt 10 ]; do\n  su -s /bin/sh www-data -c \"php /var/www/html/occ user_oidc:provider keycloak \\\n    --clientid=nextcloud \\\n    --clientsecret-env=NEXTCLOUD_OIDC_CLIENT_SECRET \\\n    --discoveryuri=$NEXTCLOUD_DISCOVERY_URL \\\n    --scope='openid email profile' \\\n    --unique-uid=0 \\\n    --mapping-uid=preferred_username \\\n    --mapping-email=email \\\n    --mapping-display-name=name \\\n    --group-provisioning=1 \\\n    --mapping-groups=groups\" >/dev/null 2>&1 || true\n  if OCC user_oidc:provider 2>/dev/null | grep -q \"keycloak\"; then\n    reg_ok=1; break\n  fi\n  r=$((r + 1)); sleep 3\ndone\nif [ \"$reg_ok\" = 1 ]; then\n  echo \"[nextcloud-oidc] provider 'keycloak' configured and verified\"\nelse\n  nextcloud_oidc_fail \"user_oidc:provider ran but the provider did not persist after retries\"\nfi\n# (d) Promote Keycloak 'platform-admins' members to Nextcloud admins (#5). user_oidc 8.11 has\n#     NO native group->admin mapping (occ user_oidc:provider offers group PROVISIONING and a\n#     login WHITELIST only), so mirror the provisioned 'platform-admins' membership into the\n#     built-in 'admin' group (the sole source of admin rights in Nextcloud). Idempotent every\n#     start: occ group:adduser is a no-op for an existing member. A user is promotable only\n#     AFTER their first OIDC login provisions them into the group, so a brand-new admin gains\n#     rights on their next login + the following pod start (or run `occ group:adduser admin\n#     <uid>` once). The LOCAL break-glass admin is unaffected (docs/15). The group name is\n#     passed to php as argv (never interpolated) so group:list JSON parses robustly.\nADMIN_SRC_GROUP=platform-admins\n# HARDENED (verify-and-retry, like step (c)): the previous single pass ran `occ group:adduser`\n# exactly once with its output swallowed (>/dev/null 2>&1) and NO retry, so an early-boot\n# transient failure (DB / maintenance race in the first seconds after container start) silently\n# dropped the promotion until the NEXT pod restart. This loop re-reads group:list and re-adds\n# any platform-admins member still missing from 'admin' until all are verified (bounded ~30s);\n# it is a no-op for members already in 'admin'. Group names are passed to php as argv (never\n# interpolated) so the JSON parses robustly.\nparse_group() { su -s /bin/sh www-data -c \"php /var/www/html/occ group:list --output=json\" 2>/dev/null | php -r '$d=json_decode(stream_get_contents(STDIN),true);$g=$argv[1];if(is_array($d)&&!empty($d[$g])&&is_array($d[$g])){foreach($d[$g] as $u){echo $u,\"\\n\";}}' -- \"$1\" 2>/dev/null; }\np=0\nwhile [ \"$p\" -lt 15 ]; do\n  current_admins=$(parse_group admin)\n  missing=0\n  for uid in $(parse_group \"$ADMIN_SRC_GROUP\"); do\n    if printf '%s\\n' \"$current_admins\" | grep -qxF -- \"$uid\"; then\n      continue\n    fi\n    missing=1\n    if OCC group:adduser admin \"$uid\" >/dev/null 2>&1; then\n      echo \"[nextcloud-oidc] ensured '$uid' is a Nextcloud admin (member of $ADMIN_SRC_GROUP)\"\n    fi\n  done\n  [ \"$missing\" = 0 ] && break\n  p=$((p + 1)); sleep 2\ndone\n[ \"$p\" -ge 15 ] && nextcloud_oidc_fail \"could not promote all $ADMIN_SRC_GROUP members into 'admin' after retries\"\n"
+              - "# Idempotent Keycloak OIDC wiring (R-IDP-02/06). Runs alongside the nextcloud entrypoint\n# (which installs/upgrades on first boot). Installs+enables the user_oidc app and creates OR\n# updates the \"keycloak\" login provider (occ user_oidc:provider is create-or-update by\n# identifier). Auto-discovery pulls the realm's endpoints; the `groups` claim drives Nextcloud\n# group provisioning. occ runs as www-data (owns config.php); the client secret is passed via\n# --clientsecret-env so it never lands on a command line. Safe to re-run every start; a missing\n# secret or not-yet-installed instance is skipped so the pod never crashloops (the local\n# break-glass admin still works).\nset -u\n# OCC runs occ as www-data (owns config.php). NOTE: this wrapper word-splits its args via $*,\n# so it is used ONLY for single-token subcommands (status/app:list/app:install/...). The\n# provider call below carries a MULTI-WORD value (--scope 'openid email profile') and is run as\n# ONE su -c with the scope single-quoted, so the inner shell keeps it a single argument.\nOCC() { su -s /bin/sh www-data -c \"php /var/www/html/occ $*\"; }\nNEXTCLOUD_DISCOVERY_URL=https://keycloak.home.keithjackson.dev/realms/homelab/.well-known/openid-configuration\nnextcloud_oidc_fail() {\n  echo \"[nextcloud-oidc] FAILED to configure 'keycloak' provider: $1\" >&2\n  { echo \"$(date -u +%Y-%m-%dT%H:%M:%SZ) [nextcloud-oidc] FAILED: $1\"; } >> /var/www/html/nextcloud-oidc-bootstrap.log 2>/dev/null || true\n}\n# (a) Wait for the instance to be installed AND out of maintenance mode. The entrypoint holds\n#     maintenance mode during first-boot install/upgrade; occ writes made in that window do not\n#     stick \u2014 a second race on top of the quoting bug fixed at (c).\ni=0\nuntil OCC status 2>/dev/null | grep -q \"installed: true\" && ! OCC status 2>/dev/null | grep -q \"maintenance: true\"; do\n  i=$((i + 1))\n  [ \"$i\" -ge 300 ] && { echo \"[nextcloud-oidc] occ not ready (installed/maintenance) after wait; skipping\" >&2; exit 0; }\n  sleep 2\ndone\n# Let Nextcloud's OWN server-side HTTP client reach the private-network IdP. The Keycloak\n# FQDN resolves (split-horizon) to the PRIVATE Cilium gateway VIP (RFC1918), and Nextcloud's\n# SSRF guard otherwise REFUSES that request \u2014 OCP\\Http\\Client\\LocalServerException \"violates\n# local access rules\" \u2014 during user_oidc's discovery/JWKS/token fetch AT LOGIN, surfacing to\n# the user as \"Could not reach the provider\". (The (b) curl check below uses system libcurl,\n# NOT this guard, so it passes while the browser login still failed.) Idempotent; re-applied\n# every start so it survives pod rolls / PVC rebuilds. Confirmed root cause 2026-08-27.\nOCC config:system:set allow_local_remote_servers --value=true --type=boolean >/dev/null 2>&1 \\\n  || echo \"[nextcloud-oidc] WARN: failed to set allow_local_remote_servers\" >&2\n# NOTE the `$$` escape below \u2014 it is load-bearing. apps-wave-1 declares postBuild.\n# substituteFrom cluster-vars, so Flux envsubst rewrites this whole manifest at RECONCILE\n# time, before any container runs. Written unescaped, `$${NEXTCLOUD_OIDC_CLIENT_SECRET:-}` is\n# not a cluster-var, so envsubst blanked it and the guard reconciled as `[ -z \"\" ]` \u2014 ALWAYS\n# TRUE \u2014 so this hook `exit 0`d here on EVERY boot since 8738871 (2026-08-27), never\n# installing/enabling user_oidc nor registering the provider. SSO kept working only because\n# the provider was already in the DB; a PVC rebuild or fresh cluster would have come up with\n# NO OIDC at all. Flux STRICT substitution cannot catch this \u2014 it EXEMPTS default-operator\n# forms by design. `$${VAR}` is the escape: envsubst emits it back as a plain brace expansion\n# for the shell. Bare `$VAR` and `$(cmd)` are left alone and need NO escaping \u2014 which is why\n# `--clientsecret-env` and the bare uses below always worked and only the guard broke.\n# Contract: clusters/base/apps-vms.yaml. Enforced at render time by catalog/render.py.\nif [ -z \"$${NEXTCLOUD_OIDC_CLIENT_SECRET:-}\" ]; then\n  echo \"\
+                [nextcloud-oidc] client secret unset; skipping OIDC (break-glass admin only)\"\n  exit 0\nfi\nif ! OCC app:list 2>/dev/null | grep -q \"user_oidc\"; then\n  OCC app:install user_oidc || echo \"[nextcloud-oidc] app:install user_oidc failed\" >&2\nfi\nOCC app:enable user_oidc >/dev/null 2>&1 || true\n# (b) Wait up to ~90s for the Keycloak discovery doc to be reachable (HTTP 200) before registering.\nd=0; disc_ok=0\nwhile [ \"$d\" -lt 45 ]; do\n  if [ \"$(curl -sS -o /dev/null -w '%{http_code}' --max-time 5 \"$NEXTCLOUD_DISCOVERY_URL\" 2>/dev/null)\" = \"200\" ]; then\n    disc_ok=1; break\n  fi\n  d=$((d + 1)); sleep 2\ndone\n[ \"$disc_ok\" = 1 ] || nextcloud_oidc_fail \"Keycloak discovery endpoint not reachable (HTTP 200) within timeout\"\n# (c) Configure (create-or-update by identifier) then VERIFY it persisted; retry the whole cycle.\n#     HARDENED: run as ONE su -c so www-data's shell parses --scope='openid email profile' as a\n#     single argument. The previous `OCC user_oidc:provider ... --scope=\"openid email profile\"`\n#     form fed the value back through the wrapper's $*, which SPLIT it into extra positionals ->\n#     occ \"Too many arguments\" -> silent failure on EVERY boot. Secret via --clientsecret-env\n#     (never on argv). The verify-then-retry loop guarantees the provider actually persisted.\nr=0; reg_ok=0\nwhile [ \"$r\" -lt 10 ]; do\n  su -s /bin/sh www-data -c \"php /var/www/html/occ user_oidc:provider keycloak \\\n    --clientid=nextcloud \\\n    --clientsecret-env=NEXTCLOUD_OIDC_CLIENT_SECRET \\\n    --discoveryuri=$NEXTCLOUD_DISCOVERY_URL \\\n    --scope='openid email profile' \\\n    --unique-uid=0 \\\n    --mapping-uid=preferred_username \\\n    --mapping-email=email \\\n    --mapping-display-name=name \\\n    --group-provisioning=1 \\\n    --mapping-groups=groups\" >/dev/null 2>&1 || true\n  if OCC user_oidc:provider 2>/dev/null | grep -q \"keycloak\"; then\n    reg_ok=1; break\n  fi\n  r=$((r + 1)); sleep 3\ndone\nif [ \"$reg_ok\" = 1 ]; then\n  echo \"[nextcloud-oidc] provider 'keycloak' configured and verified\"\nelse\n  nextcloud_oidc_fail \"user_oidc:provider ran but the provider did not persist after retries\"\nfi\n# (d) Promote Keycloak 'platform-admins' members to Nextcloud admins (#5). user_oidc 8.11 has\n#     NO native group->admin mapping (occ user_oidc:provider offers group PROVISIONING and a\n#     login WHITELIST only), so mirror the provisioned 'platform-admins' membership into the\n#     built-in 'admin' group (the sole source of admin rights in Nextcloud). Idempotent every\n#     start: occ group:adduser is a no-op for an existing member. A user is promotable only\n#     AFTER their first OIDC login provisions them into the group, so a brand-new admin gains\n#     rights on their next login + the following pod start (or run `occ group:adduser admin\n#     <uid>` once). The LOCAL break-glass admin is unaffected (docs/15). The group name is\n#     passed to php as argv (never interpolated) so group:list JSON parses robustly.\nADMIN_SRC_GROUP=platform-admins\n# HARDENED (verify-and-retry, like step (c)): the previous single pass ran `occ group:adduser`\n# exactly once with its output swallowed (>/dev/null 2>&1) and NO retry, so an early-boot\n# transient failure (DB / maintenance race in the first seconds after container start) silently\n# dropped the promotion until the NEXT pod restart. This loop re-reads group:list and re-adds\n# any platform-admins member still missing from 'admin' until all are verified (bounded ~30s);\n# it is a no-op for members already in 'admin'. Group names are passed to php as argv (never\n# interpolated) so the JSON parses robustly.\nparse_group() { su -s /bin/sh www-data -c \"php /var/www/html/occ group:list --output=json\" 2>/dev/null | php -r '$d=json_decode(stream_get_contents(STDIN),true);$g=$argv[1];if(is_array($d)&&!empty($d[$g])&&is_array($d[$g])){foreach($d[$g] as $u){echo $u,\"\\n\";}}' -- \"$1\" 2>/dev/null; }\np=0\nwhile [ \"$p\" -lt 15 ]; do\n  current_admins=$(parse_group admin)\n  missing=0\n  for uid in $(parse_group \"\
+                $ADMIN_SRC_GROUP\"); do\n    if printf '%s\\n' \"$current_admins\" | grep -qxF -- \"$uid\"; then\n      continue\n    fi\n    missing=1\n    if OCC group:adduser admin \"$uid\" >/dev/null 2>&1; then\n      echo \"[nextcloud-oidc] ensured '$uid' is a Nextcloud admin (member of $ADMIN_SRC_GROUP)\"\n    fi\n  done\n  [ \"$missing\" = 0 ] && break\n  p=$((p + 1)); sleep 2\ndone\nif [ \"$p\" -ge 15 ]; then\n  nextcloud_oidc_fail \"could not promote all $ADMIN_SRC_GROUP members into 'admin' after retries\"\nfi\n# A postStart hook MUST exit 0. A non-zero exit makes the kubelet KILL the container\n# (FailedPostStartHook -> CrashLoopBackOff), which is exactly what happened on 2026-09-01:\n# the final statement used to be `[ \"$p\" -ge 15 ] && nextcloud_oidc_fail ...`, so on the\n# SUCCESS path the test returned 1 and became the script's exit status. That was latent for\n# as long as the OIDC guard above was dead code and exited 0 first; fixing the guard\n# exposed it immediately. Every failure path here logs loudly and writes a marker file and\n# deliberately does NOT crash the pod \u2014 the break-glass local admin must stay usable.\nexit 0\n"
      volumes:
      - name: data
        persistentVolumeClaim:
@@ -11,11 +11,69 @@ Spec: [ADR-0004 (Flux)](../../../home-network-k3s/decisions/adr-0004-gitops-flux
 ## Files
 | File | Purpose |
 |---|---|
-| `bootstrap.sh` | **The single bootstrap entrypoint** the Infra worker's final Ansible play calls. `flux install` → verify `sops-age` Secret → `kubectl apply -k clusters/dev`. |
+| `bootstrap.sh` | **The single bootstrap entrypoint** the Infra worker's final Ansible play calls. render+apply the Flux controllers (`components/`) → verify `sops-age` Secret → `kubectl apply -k clusters/dev`. |
+| `components/kustomization.yaml` | **Customization of the Flux CONTROLLERS themselves.** Overlays `flux install --export` output; currently enables `StrictPostBuildSubstitutions` on kustomize-controller. See "Customizing the controllers" below. |
 | `patches/platform-sops-decryption.yaml` | Strategic-merge patch enabling `decryption.provider: sops` + `secretRef: sops-age` on the `platform` Kustomization (realises the base TODO). |
 | `patches/apps-sops-decryption.yaml` | Same, for the app-wave Kustomizations. There is **no single `apps` Kustomization** any more — the apps tier is now `apps-wave-0/1/2` + `apps-vms`, and SOPS decryption is layered on **per wave** (each wave Kustomization is patched by name in `clusters/dev`). |
 | `patches/flux-system-source-url.yaml` | Overrides the `flux-system` GitRepository `url` placeholder with the real bootstrap source (template — fill at bootstrap). |

+## Customizing the controllers (`components/`) — and how it reaches a RUNNING cluster
+
+Because this repo does not use `flux bootstrap`, the Flux controller Deployments are **not in git
+and not reconciled by Flux**. Verified on the live dev cluster (2026-09-01):
+
+```
+$ kubectl -n flux-system get deploy kustomize-controller -o jsonpath='{.metadata.labels}'
+{"app.kubernetes.io/component":"kustomize-controller","app.kubernetes.io/instance":"flux-system",
+ "app.kubernetes.io/part-of":"flux","app.kubernetes.io/version":"v2.4.0","control-plane":"controller"}
+# no kustomize.toolkit.fluxcd.io/name label; deployment.kubernetes.io/revision: 1
+```
+
+No `kustomize.toolkit.fluxcd.io/*` label => no Flux Kustomization owns it. **Nothing under
+`clusters/**` can change a controller flag.** So `bootstrap.sh` step 1 uses the mechanism Flux
+documents for hand-installed clusters ([Customize Flux
+manifests](https://fluxcd.io/flux/installation/#customize-flux-manifests)):
+
+```
+flux install --export …  ->  <tmp>/gotk-components.yaml     # regenerated from the pinned flux CLI
+components/kustomization.yaml -> <tmp>/kustomization.yaml   # the only hand-authored part (in git)
+kubectl kustomize <tmp> | kubectl apply -f -
+```
+
+Nothing is vendored into the repo, so the component manifests can never drift from `FLUX_VERSION`
+(`infra/devcontainer/versions.env`). Every future controller flag (vertical scaling, tolerations,
+more feature gates) is another entry in `components/kustomization.yaml`.
+
+### Rolling this out to the ALREADY-RUNNING dev cluster (operator/PM step — NOT automatic)
+
+> **A `git push` does not deliver this.** Merging the change reconciles `clusters/**` only; the
+> controller Deployment is outside Flux's inventory. Someone must run step 1.
+
+Re-running `bootstrap.sh` is safe and idempotent, but if you want only step 1:
+
+```bash
+# inside infra/devcontainer (pinned flux 2.4.0 / kubectl 1.36.4), from the repo root
+d=$(mktemp -d)
+flux install --export --namespace=flux-system \
+  --components-extra=image-reflector-controller,image-automation-controller > "$d/gotk-components.yaml"
+cp bootstrap/flux/components/kustomization.yaml "$d/kustomization.yaml"
+kubectl kustomize "$d" | kubectl apply -f -      # add --server-side --force-conflicts on a field-manager conflict
+kubectl -n flux-system rollout status deploy/kustomize-controller
+```
+
+**Expect kustomize-controller to restart** (new arg => new pod template => new ReplicaSet). Any
+reconcile in flight is interrupted and retried by the new pod; Flux is level-triggered, so nothing
+is lost. Confirm afterwards:
+
+```bash
+kubectl -n flux-system get deploy kustomize-controller \
+  -o jsonpath='{.spec.template.spec.containers[0].args}'   # must contain --feature-gates=StrictPostBuildSubstitutions=true
+flux get kustomizations -A                                  # all 11 must return to Ready
+```
+
+**Rollback** is the same command with `FLUX_INSTALL_PLAIN=1 bash bootstrap/flux/bootstrap.sh`, or
+simply `flux install --namespace=flux-system --components-extra=…` (drops the arg back off).
+
 ## Why `flux install` + apply, not `flux bootstrap git` (Phase 1)

 The reconciliation graph is **already authored** in `clusters/base` (read-only to this worker):
@@ -69,16 +69,59 @@ for bin in flux kubectl; do
  command -v "$bin" >/dev/null 2>&1 || { echo "ERROR: '$bin' not found (use infra/devcontainer)." >&2; exit 1; }
 done

-# --- 1. install Flux controllers ---------------------------------------------
+# --- 1. install Flux controllers (rendered through ./components) --------------
 # Default controllers + the image-reflector/image-automation pair (Phase-4 hands-off updates,
 # ADR-0009). `--components-extra` regenerates flux-system with all controllers and registers the
 # image.toolkit.fluxcd.io CRDs before any reconcile — so platform/image-automation's CR applies cleanly.
-if [ -n "${FLUX_COMPONENTS_EXTRA}" ]; then
-  echo "==> [1/3] flux install (default controllers + extra: ${FLUX_COMPONENTS_EXTRA})"
-  flux install --namespace="${FLUX_NAMESPACE}" --components-extra="${FLUX_COMPONENTS_EXTRA}"
+#
+# We do NOT run `flux install` directly any more. The controllers need CUSTOMIZING (currently:
+# --feature-gates=StrictPostBuildSubstitutions=true on kustomize-controller, so an undefined
+# postBuild variable FAILS the Kustomization instead of silently rendering an empty string — see
+# ./components/kustomization.yaml and the 2026-09-01 INCIDENT entry in DECISIONS-LOG.md).
+#
+# `flux install` has no flag for that, and because this repo does not use `flux bootstrap` the
+# controllers are not in git for a Flux Kustomization to patch. So we use the mechanism Flux
+# documents for hand-installed clusters ("Customize Flux manifests"):
+#
+#     flux install --export  >  gotk-components.yaml     # exact manifests `flux install` would apply
+#     kustomize overlay      =  ./components/kustomization.yaml (checked in — the ONLY hand-authored part)
+#     kubectl apply -k
+#
+# The export is regenerated from the PINNED flux CLI on every run (FLUX_VERSION,
+# infra/devcontainer/versions.env), so nothing is vendored and nothing can drift. The render dir is
+# a temp dir — the repo tree is never written to.
+#
+# ESCAPE HATCH: FLUX_INSTALL_PLAIN=1 falls back to a bare `flux install` (no customization, so NO
+# strict substitution). Use only to unblock a bring-up if the render path misbehaves, and say so.
+echo "==> [1/3] installing Flux controllers${FLUX_COMPONENTS_EXTRA:+ (+ extra: ${FLUX_COMPONENTS_EXTRA})}"
+flux_install_args=(--namespace="${FLUX_NAMESPACE}")
+[ -n "${FLUX_COMPONENTS_EXTRA}" ] && flux_install_args+=(--components-extra="${FLUX_COMPONENTS_EXTRA}")
+
+if [ "${FLUX_INSTALL_PLAIN:-0}" = "1" ]; then
+  echo "    WARNING: FLUX_INSTALL_PLAIN=1 — controller customization SKIPPED."
+  echo "             StrictPostBuildSubstitutions will NOT be enabled; substitution fails OPEN."
+  flux install "${flux_install_args[@]}"
 else
-  echo "==> [1/3] flux install (default controllers only)"
-  flux install --namespace="${FLUX_NAMESPACE}"
+  components_dir="${script_dir}/components"
+  [ -f "${components_dir}/kustomization.yaml" ] || {
+    echo "ERROR: ${components_dir}/kustomization.yaml missing — refusing to install uncustomized." >&2
+    echo "       (Override with FLUX_INSTALL_PLAIN=1 only if you accept fail-OPEN substitution.)" >&2
+    exit 1
+  }
+  render_dir="$(mktemp -d)"
+  trap 'rm -rf "${render_dir}"' EXIT
+  echo "    rendering flux install --export through ${components_dir}"
+  flux install --export "${flux_install_args[@]}" > "${render_dir}/gotk-components.yaml"
+  cp "${components_dir}/kustomization.yaml" "${render_dir}/kustomization.yaml"
+  # Fail fast if the overlay cannot build (e.g. a patch target that no longer exists after a Flux
+  # version bump) — better a hard stop than silently installing without the feature gate.
+  kubectl kustomize "${render_dir}" > "${render_dir}/rendered.yaml"
+  grep -q -- '--feature-gates=StrictPostBuildSubstitutions=true' "${render_dir}/rendered.yaml" || {
+    echo "ERROR: the StrictPostBuildSubstitutions patch did not apply to the rendered manifests." >&2
+    echo "       Check ./components/kustomization.yaml against this flux CLI version." >&2
+    exit 1
+  }
+  kubectl apply -f "${render_dir}/rendered.yaml"
 fi

 # --- 2. verify the out-of-band age key Secret exists -------------------------
@@ -0,0 +1,64 @@
+---
+# Controller-level customization of the Flux CONTROLLERS themselves (the `flux-system` Deployments).
+#
+# WHY THIS DIRECTORY EXISTS
+# =========================
+# This repo does NOT use `flux bootstrap` (see ../README.md "Why `flux install` + apply"): the
+# reconciliation graph is authored by hand in clusters/base, and the controllers are installed
+# imperatively by `flux install`. Consequence, verified on the live dev cluster 2026-09-01:
+#
+#     kubectl -n flux-system get deploy kustomize-controller -o jsonpath='{.metadata.labels}'
+#     -> NO kustomize.toolkit.fluxcd.io/name label, deployment.kubernetes.io/revision: 1
+#
+# i.e. **the controllers are not managed by Flux and are not in git.** There was therefore no
+# existing mechanism to customize them, and no amount of editing under clusters/** can reach them.
+#
+# This is the mechanism Flux documents for exactly that situation ("Customize Flux manifests" —
+# https://fluxcd.io/flux/installation/#customize-flux-manifests): export the component manifests
+# with `flux install --export`, overlay them with kustomize `patches:`, and apply the result.
+# `../bootstrap.sh` step 1 does that render — it copies THIS file next to a freshly exported
+# `gotk-components.yaml` in a temp dir and runs `kubectl apply -k`. Nothing is generated into the
+# repo, so the manifests can never drift from the pinned FLUX_VERSION
+# (infra/devcontainer/versions.env) the way a vendored copy would.
+#
+# Every future controller customization (vertical scaling, tolerations, extra feature gates,
+# --concurrent) belongs HERE, as another entry under `patches:`.
+apiVersion: kustomize.config.k8s.io/v1beta1
+kind: Kustomization
+resources:
+  # Written by `bootstrap.sh` from `flux install --export ...` at render time. NOT checked in.
+  - gotk-components.yaml
+patches:
+  # -------------------------------------------------------------------------------------------
+  # StrictPostBuildSubstitutions — make postBuild substitution FAIL CLOSED.
+  #
+  # Default behaviour is fail-OPEN: a `${VAR}` that is not defined in `cluster-vars` renders as the
+  # EMPTY STRING, silently. On 2026-09-01 that shipped `k8sServiceHost: ""` into the Cilium
+  # HelmRelease and put 2 of 3 agents into Init:Error (DECISIONS-LOG, INCIDENT entry). With this
+  # gate the undefined variable FAILS the Kustomization instead, and Flux keeps the last-good state.
+  #
+  # PROVEN SAFE before enabling: every one of the 11 substituted paths was rendered with
+  # `kubectl kustomize --load-restrictor LoadRestrictionsNone <path> | flux envsubst --strict` and
+  # exited 0, with a negative control reproducing the incident. The permanent guard that keeps it
+  # true is the L0 gate conformance/tests/l0-static/flux-postbuild-substitution/.
+  #
+  # NOTE the gate does NOT catch default-providing forms (`${VAR:-d}`, `${VAR:?msg}`, `${VAR:=v}`) —
+  # Flux exempts them by design. That class is what the L0 gate covers; the two are complementary.
+  #
+  # This also pre-pays for the Flux 2.4.0 -> 2.9.x upgrade: strict substitution became DEFAULT-ON in
+  # kustomize-controller v1.9.0, so the upgrade flips this behaviour whether or not we opt in.
+  #
+  # JSON-6902 `add ... /args/-` (append), NOT a strategic merge: a container's `args` is an atomic
+  # list, so a strategic-merge patch would REPLACE every arg `flux install` generates
+  # (--events-addr, --watch-all-namespaces, --log-level, --log-encoding, --enable-leader-election)
+  # and silently drop any the CLI adds in a future version.
+  - target:
+      group: apps
+      version: v1
+      kind: Deployment
+      name: kustomize-controller
+      namespace: flux-system
+    patch: |-
+      - op: add
+        path: /spec/template/spec/containers/0/args/-
+        value: --feature-gates=StrictPostBuildSubstitutions=true
@@ -28,6 +28,16 @@ inherit every guarantee automatically.
  `auth.groups`; `native`/`none` are documented exceptions only.
 - Irreplaceable state (`class: longhorn` configs/DBs) must set `backup.policy` to an off-cluster
  schedule — never `reacquirable` (R-STATE-03). Only bulk media may be `reacquirable`.
+- **Shell braces must be escaped `$${...}`.** Anything rendered verbatim onto the workload — a
+  `lifecycle` postStart script, an `env` value — lands under `apps/wave-<N>/`, and every
+  `apps-wave-<N>` Flux Kustomization declares `postBuild.substituteFrom: cluster-vars`. Flux runs
+  envsubst over the WHOLE manifest at reconcile time, so an unescaped `${VAR:-}` meant for the
+  *shell* is replaced with the empty string before the container ever starts (this silently killed
+  gitea's and nextcloud's OIDC registration for days). Bare `$VAR` and `$(cmd)` are left alone and
+  need no escaping; a genuine environment knob is declared in `clusters/base/cluster-vars.yaml` and
+  written bare `${KNOB}`. Full contract: [`../clusters/base/apps-vms.yaml`](../clusters/base/apps-vms.yaml).
+  `render.py` REFUSES to emit a manifest that breaks this rule (Flux's *strict* substitution mode
+  cannot: it deliberately exempts the `${V:-}` / `${V:=x}` / `${V:?}` default-operator forms).

 ## Validate before commit — single command, no cluster (R-TEST-02)
 ```bash
@@ -109,7 +109,19 @@ lifecycle:
            echo "[gitea-oidc] FAILED to register 'keycloak' login source: $1" >&2
            { echo "$(date -u +%Y-%m-%dT%H:%M:%SZ) [gitea-oidc] FAILED: $1"; } >> /data/gitea-oidc-bootstrap.log 2>/dev/null || true
          }
-          if [ -z "${GITEA_OIDC_CLIENT_SECRET:-}" ]; then
+          # NOTE the `$$` escape below — it is load-bearing. apps-wave-0 declares postBuild.
+          # substituteFrom cluster-vars, so Flux envsubst rewrites this whole manifest at RECONCILE
+          # time, before any container runs. Written unescaped, `$${GITEA_OIDC_CLIENT_SECRET:-}` is not
+          # a cluster-var, so envsubst blanked it and the guard reconciled as `[ -z "" ]` — ALWAYS TRUE
+          # — making every line below (discovery wait, add/update-oauth, verify-then-retry) DEAD CODE on
+          # every boot since 8738871 (2026-08-27). SSO kept working only because the login source was
+          # already in the DB; a PVC rebuild or fresh cluster would have come up with NO OIDC at all.
+          # Flux STRICT substitution cannot catch this — it EXEMPTS default-operator forms by design.
+          # `$${VAR}` is the escape: envsubst emits it back as a plain brace expansion for the shell.
+          # Bare `$VAR` and `$(cmd)` are left alone and need NO escaping — which is why the
+          # `$GITEA_OIDC_CLIENT_SECRET` uses below always worked and only the guards broke.
+          # Contract: clusters/base/apps-vms.yaml. Enforced at render time by catalog/render.py.
+          if [ -z "$${GITEA_OIDC_CLIENT_SECRET:-}" ]; then
            echo "[gitea-oidc] GITEA_OIDC_CLIENT_SECRET unset; skipping OIDC source (break-glass admin only)"
          else
            # (1) Wait up to ~90s for the Keycloak discovery doc to be reachable (HTTP 200).
@@ -150,6 +162,12 @@ lifecycle:
              gitea_oidc_fail "add/update-oauth ran but the 'keycloak' source did not persist after retries"
            fi
          fi
+          # A postStart hook MUST exit 0 — a non-zero exit makes the kubelet KILL the container
+          # (FailedPostStartHook -> CrashLoopBackOff). This hook already ends 0 on both paths, but
+          # it is made EXPLICIT so the guarantee does not depend on whatever statement happens to
+          # be last. nextcloud's equivalent hook did depend on that and crashlooped on 2026-09-01,
+          # the moment its OIDC guard was fixed and the block actually ran for the first time.
+          exit 0
 exposure: public                # edge-forwarded git host at gitea.home.keithjackson.dev (docs/09; R-DNS/R-NET)
 egress: internet                # normal WAN egress (docs/03; R-NET-05)
 storage:
@@ -111,7 +111,19 @@ lifecycle:
          # every start so it survives pod rolls / PVC rebuilds. Confirmed root cause 2026-08-27.
          OCC config:system:set allow_local_remote_servers --value=true --type=boolean >/dev/null 2>&1 \
            || echo "[nextcloud-oidc] WARN: failed to set allow_local_remote_servers" >&2
-          if [ -z "${NEXTCLOUD_OIDC_CLIENT_SECRET:-}" ]; then
+          # NOTE the `$$` escape below — it is load-bearing. apps-wave-1 declares postBuild.
+          # substituteFrom cluster-vars, so Flux envsubst rewrites this whole manifest at RECONCILE
+          # time, before any container runs. Written unescaped, `$${NEXTCLOUD_OIDC_CLIENT_SECRET:-}` is
+          # not a cluster-var, so envsubst blanked it and the guard reconciled as `[ -z "" ]` — ALWAYS
+          # TRUE — so this hook `exit 0`d here on EVERY boot since 8738871 (2026-08-27), never
+          # installing/enabling user_oidc nor registering the provider. SSO kept working only because
+          # the provider was already in the DB; a PVC rebuild or fresh cluster would have come up with
+          # NO OIDC at all. Flux STRICT substitution cannot catch this — it EXEMPTS default-operator
+          # forms by design. `$${VAR}` is the escape: envsubst emits it back as a plain brace expansion
+          # for the shell. Bare `$VAR` and `$(cmd)` are left alone and need NO escaping — which is why
+          # `--clientsecret-env` and the bare uses below always worked and only the guard broke.
+          # Contract: clusters/base/apps-vms.yaml. Enforced at render time by catalog/render.py.
+          if [ -z "$${NEXTCLOUD_OIDC_CLIENT_SECRET:-}" ]; then
            echo "[nextcloud-oidc] client secret unset; skipping OIDC (break-glass admin only)"
            exit 0
          fi
@@ -191,7 +203,17 @@ lifecycle:
            [ "$missing" = 0 ] && break
            p=$((p + 1)); sleep 2
          done
-          [ "$p" -ge 15 ] && nextcloud_oidc_fail "could not promote all $ADMIN_SRC_GROUP members into 'admin' after retries"
+          if [ "$p" -ge 15 ]; then
+            nextcloud_oidc_fail "could not promote all $ADMIN_SRC_GROUP members into 'admin' after retries"
+          fi
+          # A postStart hook MUST exit 0. A non-zero exit makes the kubelet KILL the container
+          # (FailedPostStartHook -> CrashLoopBackOff), which is exactly what happened on 2026-09-01:
+          # the final statement used to be `[ "$p" -ge 15 ] && nextcloud_oidc_fail ...`, so on the
+          # SUCCESS path the test returned 1 and became the script's exit status. That was latent for
+          # as long as the OIDC guard above was dead code and exited 0 first; fixing the guard
+          # exposed it immediately. Every failure path here logs loudly and writes a marker file and
+          # deliberately does NOT crash the pod — the break-glass local admin must stay usable.
+          exit 0
 exposure: public                # edge port-forward + public DNS (docs/09; R-DNS/R-NET)
 egress: internet                # normal WAN egress (docs/03; R-NET-05) — app store, integrity checks
 storage:
@@ -29,6 +29,7 @@ conformance harness stays stdlib-only and only shells out to this script + diffs
 from __future__ import annotations

 import argparse
+import re
 import sys
 from pathlib import Path

@@ -936,6 +937,124 @@ def r_virtualmachine(s: dict) -> dict:
    }


+# =============================================================================
+# Substitution safety (R-ENV-02 / R-GITOPS-02) — refuse to emit a manifest that
+# Flux's envsubst would silently eat before the workload ever runs.
+# =============================================================================
+# Every manifest this renderer writes lands under apps/wave-<N>/, and EVERY apps-wave-<N>
+# Flux Kustomization declares `postBuild.substituteFrom: cluster-vars` (see
+# flux_wave_kustomization_text below). Flux therefore runs envsubst over the WHOLE rendered
+# document — including any shell script carried verbatim in a `lifecycle` hook or an env
+# value — at reconcile time, long before a container sees it. The escape contract is stated
+# in clusters/base/apps-vms.yaml and proven with `flux envsubst`:
+#
+#   `${VAR}`   -> SUBSTITUTED (empty when unset)   => a shell brace must be written `$${VAR}`,
+#                                                     which envsubst emits back as `${VAR}`.
+#   `$VAR`     -> left alone                       => bare shell vars need NO escaping.
+#   `$(cmd)`   -> left alone                       => command substitution needs NO escaping.
+#   `${A[0]}`  -> HARD ERROR ("missing closing brace"), failing the whole Kustomization.
+#
+# This bit us for real (fixed 2026-09-01): gitea/nextcloud guarded their whole Keycloak OIDC
+# registration with `if [ -z "${..._OIDC_CLIENT_SECRET:-}" ]`. Neither name is a cluster-var,
+# so envsubst rendered the guard as `if [ -z "" ]` — ALWAYS TRUE — and every boot skipped the
+# registration entirely. Flux's STRICT substitution mode cannot catch this class: it
+# deliberately EXEMPTS the default-operator forms (`${V:-}`, `${V:=x}`, `${V:?}`), which is
+# exactly the form a defensive shell script uses. So the renderer checks it itself.
+CLUSTER_VARS_PATH = (
+    Path(__file__).resolve().parent.parent / "clusters" / "base" / "cluster-vars.yaml"
+)
+
+# A run of `$` followed by `{...}`. envsubst consumes `$$` as a literal `$`, so a run of N
+# dollars leaves the brace SUBSTITUTED when N is odd (`${X}`, `$$${X}`) and LITERAL when N is
+# even (`$${X}` — the escape). Deliberately greedy about the body so malformed/indexed forms
+# (`${A[0]}`) are caught too rather than skipped.
+_BRACED_EXPANSION_RE = re.compile(r"(\$+)\{([^{}]*)\}")
+_PLAIN_IDENT_RE = re.compile(r"[A-Za-z_][A-Za-z0-9_]*\Z")
+
+_CLUSTER_VARS_CACHE: dict = {}
+
+
+def cluster_vars_keys(path: Path | None = None) -> set:
+    """The declared cluster-vars keys — the ONLY names envsubst may legitimately expand.
+
+    Read from clusters/base/cluster-vars.yaml (the single knob surface, R-ENV-02) so the
+    renderer never carries a stale hardcoded copy. Unreadable/absent => empty set, i.e.
+    FAIL-CLOSED: with no known knobs, every braced expansion must be escaped for the shell.
+    """
+    key = str(path or CLUSTER_VARS_PATH)
+    if key not in _CLUSTER_VARS_CACHE:
+        try:
+            doc = yaml.safe_load(Path(key).read_text())
+            data = doc.get("data") if isinstance(doc, dict) else None
+            _CLUSTER_VARS_CACHE[key] = set(data) if isinstance(data, dict) else set()
+        except Exception:  # pragma: no cover - absent/malformed => fail closed
+            _CLUSTER_VARS_CACHE[key] = set()
+    return _CLUSTER_VARS_CACHE[key]
+
+
+def substitution_violations(text: str, known: set | None = None) -> list:
+    """Every unescaped `${...}` in `text` that is NOT a bare, declared cluster-vars key.
+
+    Returns `(line_number, token, reason)` triples in line order. An expansion is ALLOWED only
+    when it is exactly `${KNOWN_KEY}` — a deliberate R-ENV-02 knob. Anything else is a bug:
+    a shell expansion that envsubst will eat (`${V:-}`), a typo'd/undeclared knob that
+    envsubst will blank, or an indexed form that hard-fails the whole Kustomization.
+    """
+    keys = cluster_vars_keys() if known is None else known
+    out = []
+    for lineno, line in enumerate(text.splitlines(), start=1):
+        for m in _BRACED_EXPANSION_RE.finditer(line):
+            if len(m.group(1)) % 2 == 0:
+                continue  # even run of `$` => escaped; envsubst emits it back literally
+            expr = m.group(2)
+            if _PLAIN_IDENT_RE.match(expr):
+                if expr in keys:
+                    continue  # a declared cluster-vars knob, intentionally substituted
+                reason = (
+                    f"'{expr}' is not a declared cluster-vars key — envsubst will replace "
+                    "it with the EMPTY STRING"
+                )
+            elif "[" in expr:
+                reason = (
+                    "indexed expansion — envsubst hard-fails with 'missing closing brace' "
+                    "and the whole Kustomization stops reconciling"
+                )
+            else:
+                reason = (
+                    "shell expansion (default-operator/parameter form) — envsubst eats it "
+                    "at reconcile time and STRICT mode exempts this form, so nothing else "
+                    "will catch it"
+                )
+            out.append((lineno, m.group(0), reason))
+    return out
+
+
+def assert_substitution_safe(text: str, origin: str = "<render>") -> None:
+    """Refuse to emit a manifest carrying an unescaped braced expansion (see above).
+
+    Raises ValueError listing every offending token. The fix is almost always to escape the
+    shell brace as `$${...}` (envsubst emits a literal `${...}` for the shell), or — if the
+    value really is an environment knob — to declare it in clusters/base/cluster-vars.yaml
+    and write it as a bare `${KNOB}`.
+    """
+    bad = substitution_violations(text)
+    if not bad:
+        return
+    lines = [
+        f"{origin}: refusing to emit — unescaped `${{...}}` in a manifest that Flux's "
+        "postBuild.substituteFrom (cluster-vars) will substitute at reconcile time:"
+    ]
+    for lineno, token, reason in bad:
+        lines.append(f"  line {lineno}: {token}  -> {reason}")
+    lines.append(
+        "  FIX: a SHELL expansion must be escaped `$${...}` (envsubst emits a literal "
+        "`${...}`); bare `$VAR` / `$(cmd)` need no escaping. A genuine environment knob "
+        "must be declared in clusters/base/cluster-vars.yaml and written bare `${KNOB}`. "
+        "Contract: clusters/base/apps-vms.yaml."
+    )
+    raise ValueError("\n".join(lines))
+
+
 # =============================================================================
 # Top-level render + emit
 # =============================================================================
@@ -1026,8 +1145,14 @@ def render(sd: dict, image_automation: bool = True, inbound: list | None = None)
    return docs


-def emit(docs: list) -> str:
-    """Deterministic multi-document YAML text (golden-diffable)."""
+def emit(docs: list, origin: str = "<render>") -> str:
+    """Deterministic multi-document YAML text (golden-diffable).
+
+    Every emitted document is checked against the substitution contract before it is handed
+    back (assert_substitution_safe): the rendered manifest lands on a Flux path that runs
+    envsubst over it, so an unescaped `${...}` meant for a SHELL is silently blanked. Raises
+    ValueError rather than emitting such a manifest.
+    """
    parts = []
    for comment, resource in docs:
        body = yaml.dump(
@@ -1037,7 +1162,9 @@ def emit(docs: list) -> str:
            width=4096,
        )
        parts.append(f"---\n# {comment}\n{body}".rstrip() + "\n")
-    return "".join(parts)
+    text = "".join(parts)
+    assert_substitution_safe(text, origin)
+    return text


 def load_sd(path: Path) -> dict:
@@ -1076,7 +1203,9 @@ def render_file(path: Path, image_automation: bool = True, catalog_dir: Path | N
    src_dir = catalog_dir if catalog_dir is not None else path.parent
    rev = build_reverse_map(_load_catalog(src_dir))
    inbound = rev.get(sd["name"], [])
-    return emit(render(sd, image_automation=image_automation, inbound=inbound))
+    return emit(
+        render(sd, image_automation=image_automation, inbound=inbound), origin=str(path)
+    )


 # =============================================================================
@@ -1729,6 +1858,90 @@ def _selftest() -> int:
    check(kt["kind"] == "Kustomization" and kt["resources"] == ["svc.yaml", "sonarr.yaml"],
          "wave kustomization must list exactly the wave's resources")

+    # 8) substitution safety (R-ENV-02): the renderer must REFUSE to emit a manifest whose
+    #    shell script carries an unescaped `${...}`. Every rendered manifest lands under a
+    #    Flux path with postBuild.substituteFrom cluster-vars, so envsubst rewrites it before
+    #    the container runs — this is the gitea/nextcloud OIDC-guard bug (`[ -z "${X:-}" ]`
+    #    -> `[ -z "" ]`, always true, whole registration block skipped on every boot).
+    known = {"BASE_DOMAIN", "GATEWAY_VIP"}
+    # allowed: a bare, DECLARED cluster-vars knob is a deliberate R-ENV-02 substitution.
+    check(
+        substitution_violations("host: app.${BASE_DOMAIN}", known) == [],
+        "a bare declared cluster-vars key must be allowed (that is what substitution is FOR)",
+    )
+    # allowed: escaped shell braces, and the forms envsubst leaves alone.
+    check(
+        substitution_violations('if [ -z "$${X:-}" ]; then', known) == [],
+        "an ESCAPED `$${...}` must be allowed (envsubst emits it back as a literal `${...}`)",
+    )
+    check(
+        substitution_violations('t="$(mktemp)"; echo "$HOME $1"', known) == [],
+        "bare `$VAR` / `$(cmd)` are left alone by envsubst and must NOT be flagged",
+    )
+    # `$$` is a literal `$` to envsubst, so an ODD run of dollars still leaves the brace live.
+    check(
+        len(substitution_violations("$$${X:-}", known)) == 1,
+        "an ODD run of `$` still substitutes ($$ -> literal $, then `${X:-}` is eaten)",
+    )
+    # flagged: the exact regression — a default-operator form STRICT mode deliberately exempts.
+    guard_bug = substitution_violations('if [ -z "${GITEA_OIDC_CLIENT_SECRET:-}" ]; then', known)
+    check(
+        len(guard_bug) == 1 and guard_bug[0][1] == "${GITEA_OIDC_CLIENT_SECRET:-}",
+        "an unescaped `${VAR:-}` shell guard must be flagged (strict mode exempts this form)",
+    )
+    # flagged: an undeclared bare knob (envsubst blanks it), and an indexed form (hard error).
+    check(
+        len(substitution_violations("value: ${NOT_A_KNOB}", known)) == 1,
+        "an undeclared bare `${VAR}` must be flagged (envsubst blanks it silently)",
+    )
+    idx = substitution_violations("echo ${PIPESTATUS[0]}", known)
+    check(
+        len(idx) == 1 and "missing closing brace" in idx[0][2],
+        "an indexed `${A[0]}` must be flagged (envsubst hard-fails the whole Kustomization)",
+    )
+    # the checker must be wired into emit(): rendering an SD whose lifecycle hook carries the
+    # bug RAISES rather than writing a manifest whose guard is dead on arrival.
+    bad_sd = {
+        "name": "subbad",
+        "source": {"image": "a:1"},
+        "lifecycle": {
+            "postStart": {
+                "exec": {
+                    "command": [
+                        "/bin/sh",
+                        "-c",
+                        'if [ -z "${SUBBAD_SECRET:-}" ]; then exit 0; fi',
+                    ]
+                }
+            }
+        },
+    }
+    try:
+        emit(render(bad_sd), origin="<selftest>")
+        check(False, "emit must REFUSE a manifest with an unescaped `${...}` shell expansion")
+    except ValueError as exc:
+        check(
+            "SUBBAD_SECRET" in str(exc) and "$${" in str(exc),
+            "the refusal must name the offending token AND state the `$${...}` fix",
+        )
+    # the ESCAPED form of the same hook renders normally (the fix must be emittable).
+    good_sd = dict(bad_sd, name="subgood")
+    good_sd["lifecycle"] = {
+        "postStart": {
+            "exec": {
+                "command": [
+                    "/bin/sh",
+                    "-c",
+                    'if [ -z "$${SUBBAD_SECRET:-}" ]; then exit 0; fi',
+                ]
+            }
+        }
+    }
+    check(
+        "$${SUBBAD_SECRET:-}" in emit(render(good_sd), origin="<selftest>"),
+        "the escaped `$${...}` form must render (and reach the shell as `${...}`)",
+    )
+
    if failures:
        for f in failures:
            sys.stderr.write(f"SELFTEST FAIL: {f}\n")
@@ -100,6 +100,43 @@ else
  fi
 fi

+# ---- Stage 3c: Flux post-build substitution safety (UNCONDITIONAL) ----------
+# R-ENV-02's promote-once mechanism is `postBuild.substituteFrom cluster-vars`, and it
+# FAILS OPEN: an undefined ${TOKEN} becomes the empty string and the Kustomization still
+# reports Ready. That emptied Cilium's k8sServiceHost and broke the CNI on 2/3 dev nodes
+# (DECISIONS-LOG 2026-09-01, "substitution race that fails OPEN"). The check asserts every
+# ${...} in every substituted path is DEFINED in cluster-vars or deliberately ESCAPED
+# `$${...}` — i.e. that enabling the StrictPostBuildSubstitutions feature gate cannot fail
+# a legitimate manifest, and that no expansion silently empties today.
+#
+# WHY THIS IS ITS OWN STAGE and not left to Stage 3b: 3b scopes the conformance run to the
+# TOUCHED requirements (R-TEST-03), and ci/touched-requirements.sh's coarse path map keys
+# only clusters/* to R-ENV-02 — an edit to a SUBSTITUTED manifest under apps/ or platform/
+# attributes no requirement, so the requirement-scoped selection would filter this check
+# out of exactly the change that introduces the bug. The invariant is whole-repo (same
+# reasoning as spec-immutability's own gate stage), so it runs on EVERY gate invocation.
+# When 3b's touched set does include R-ENV-02/R-GITOPS-01 the check runs twice; it is a
+# sub-second offline scan with no side effects, so the duplication is not worth avoiding.
+SUBST_CHECK="${SUBST_CHECK:-${REPO_ROOT}/conformance/tests/l0-static/flux-postbuild-substitution/check.sh}"
+log "Stage: Flux postBuild substitution safety (${SUBST_CHECK})"
+if [ ! -f "$SUBST_CHECK" ]; then
+  skip "substitution check not present at '${SUBST_CHECK}' — UNWIRED, not green"
+  summary "- subst-safety: **SKIPPED** (check missing)"
+  if [ "$rc" -eq 0 ]; then rc=3; fi
+else
+  subst_rc=0
+  bash "$SUBST_CHECK" || subst_rc=$?
+  case "$subst_rc" in
+    0) ok "Flux postBuild substitution safety passed"
+       summary "- subst-safety: **passed**" ;;
+    3) skip "substitution check SKIPPED (clusters/ absent) — not a pass"
+       summary "- subst-safety: **SKIPPED** (nothing to audit)"
+       if [ "$rc" -eq 0 ]; then rc=3; fi ;;
+    *) err "Flux postBuild substitution safety FAILED"
+       summary "- subst-safety: **FAILED**"; rc=1 ;;
+  esac
+fi
+
 case "$rc" in
  0) ok "L0 stage complete" ;;
  3) skip "L0 stage incomplete (unwired seam / missing tool) — not a pass" ;;
@@ -0,0 +1,60 @@
+---
+# Flux Kustomization: CILIUM (the CNI) — reconciles ./platform/cilium.
+# Serves R-PLAT-01 (platform components reconciled by GitOps) and R-GITOPS-01/03.
+#
+# WHY CILIUM HAS ITS OWN KUSTOMIZATION (split out of `platform`, 2026-09-01)
+#
+# This is the MIRROR IMAGE of the oauth2-proxy / headlamp splits, not a repeat of them. Those are
+# leaves that must NEVER gate a tier, so they left `platform` and run `wait: false` below it.
+# Cilium is the one component that legitimately SHOULD gate everything — but inside the shared
+# `platform` Kustomization its health was indistinguishable from eleven unrelated components:
+#
+#   * `platform`'s Ready condition could not tell you "the CNI is down" from "longhorn is slow".
+#   * The only emergency valve was `flux suspend kustomization platform` — freezing the ENTIRE
+#     tier (storage, TLS, DNS, ingress, monitoring, Keycloak, KubeVirt) to stop touching the CNI.
+#     `flux suspend kustomization cilium` now freezes exactly the CNI and nothing else, which is
+#     the valve the 2026-09-01 substitution incident wanted and did not have.
+#   * `platform`'s 10m interval + 5m timeout are wrong for a CNI: a 3-node DaemonSet rollout with
+#     `wait: true` can exceed 5m, and re-rendering the CNI every 10m buys nothing.
+#
+# GATING IS PRESERVED, NOT WEAKENED: `wait: true` here plus `platform.dependsOn: [cilium]` means
+# nothing in the graph reconciles until the CNI is healthy — the same guarantee as before, now
+# expressed as an explicit edge instead of an accident of co-tenancy.
+apiVersion: kustomize.toolkit.fluxcd.io/v1
+kind: Kustomization
+metadata:
+  name: cilium
+  namespace: flux-system
+spec:
+  # A CNI does not need a 10m re-render cadence. A git push still reconciles immediately —
+  # kustomize-controller is source-triggered; `interval` is only the drift-correction floor.
+  interval: 1h
+  retryInterval: 2m
+  # 10m (not the 5m `platform` uses): a 3-node Cilium DaemonSet rollout under `wait: true`,
+  # rolled ONE NODE AT A TIME (maxUnavailable: 1, P2), legitimately exceeds 5m.
+  timeout: 10m
+  prune: true
+  # TRUE, deliberately: this is the ONE component whose health should gate the whole platform.
+  wait: true
+  # Same revision-gating reason `platform` has it (2026-09-01 incident): `cluster-vars` is APPLIED
+  # by the root `flux-system` Kustomization, and this Kustomization SUBSTITUTES from it. `dependsOn`
+  # is revision-gated (kustomize-controller v1.4.0 `checkDependencies`), so this cannot render
+  # revision N of helmrelease.yaml against the revision N-1 `cluster-vars`. That race is exactly how
+  # `k8sServiceHost: ""` once reached the Cilium HelmRelease and took down 2/3 agents.
+  dependsOn:
+    - name: flux-system   # the ROOT Kustomization (sync.yaml) that applies cluster-vars
+  sourceRef:
+    kind: GitRepository
+    name: flux-system
+  path: ./platform/cilium
+  # MANDATORY, not decorative: platform/cilium/helmrelease.yaml references ${K3S_API_HOST}.
+  # kustomize-controller now runs --feature-gates=StrictPostBuildSubstitutions=true, so without
+  # this stanza an undefined ${K3S_API_HOST} FAILS this Kustomization outright (it no longer
+  # renders empty). That is the intended fail-closed behaviour — but it means the stanza is
+  # load-bearing for the CNI coming up at all. Do not remove it.
+  postBuild:
+    substituteFrom:
+      - kind: ConfigMap
+        name: cluster-vars
+  # No `decryption` stanza: platform/cilium carries no SOPS-encrypted resource (unlike
+  # oauth2-proxy/headlamp/crafty/velero, whose overlays patch one in by name).
@@ -5,6 +5,13 @@ apiVersion: kustomize.config.k8s.io/v1beta1
 kind: Kustomization
 resources:
  - flux-system.yaml     # GitRepository (reconciliation source)
+  # Cilium (the CNI) — its OWN Kustomization, split OUT of `platform` (2026-09-01). The mirror image
+  # of the oauth2-proxy/headlamp splits: those are leaves that must never gate a tier (wait:false);
+  # Cilium is the one component that legitimately SHOULD gate everything, so it keeps wait:true and
+  # `platform` dependsOn it. Splitting it out buys a per-CNI Ready condition, CNI-appropriate
+  # interval/timeout, and `flux suspend kustomization cilium` as an emergency valve that does not
+  # freeze the other eleven platform components. See clusters/base/cilium.yaml.
+  - cilium.yaml          # Flux Kustomization -> ./platform/cilium (dependsOn flux-system, wait:true)
  - platform.yaml        # Flux Kustomization -> ./platform (CONTROLLERS: HelmReleases / CRDs)
  - platform-config.yaml # Flux Kustomization -> ./platform-config (CONFIGS: CRs; dependsOn platform)
  # App tier, split into dependency-ordered WAVES (was the single ./apps `apps` Kustomization).
@@ -11,8 +11,53 @@ spec:
  interval: 10m
  retryInterval: 2m
  timeout: 5m
-  prune: true          # drift correction: delete resources removed from git (R-GITOPS-03)
+  # Cilium was moved OUT of this tier into its own Kustomization (clusters/base/cilium.yaml)
+  # on 2026-09-01. `prune: true` is restored here now that the ownership transfer is VERIFIED
+  # live: Namespace/kube-system, the Cilium HelmRelease and the HelmRepository all carry
+  # `kustomize.toolkit.fluxcd.io/name=cilium`, this Kustomization's inventory no longer lists
+  # any of the three, and the `cilium` Kustomization's inventory holds exactly those three.
+  #
+  # LESSON WORTH KEEPING: `platform/cilium/namespace.yaml` was the ONLY declaration of
+  # Namespace/kube-system under ./platform. Moving that path out of a prune:true Kustomization
+  # made the stale set `delete namespace kube-system` — coredns, metrics-server, local-path AND
+  # Cilium. Before moving ANY platform/* component in future, check whether it is the sole
+  # declarer of a shared Namespace; that turns a component-scoped prune into a cluster-scoped one.
+  prune: true
  wait: true           # block `apps` until platform is healthy
+  # ORDERING FIX (2026-09-01 incident: a substitution race that failed OPEN broke Cilium).
+  #
+  # `cluster-vars` — the ConfigMap every substituting Kustomization reads — is APPLIED by the root
+  # `flux-system` Kustomization (clusters/<env>/sync.yaml), not by this one. Without an edge here,
+  # `platform` could render a manifest from revision N against the revision N-1 `cluster-vars`, so a
+  # NEWLY ADDED knob was undefined and (non-strict substitution) silently became the EMPTY STRING.
+  # That is how `k8sServiceHost: ""` reached the Cilium HelmRelease.
+  #
+  # `dependsOn` is REVISION-gated, not merely Ready-gated (verified against
+  # kustomize-controller v1.4.0 `kustomization_controller.go :: checkDependencies`, our version):
+  # when the dependency shares a GitRepository with the dependent, the dependent cannot reconcile
+  # revision N until the dependency has APPLIED revision N. Applying revision N is exactly what
+  # writes a newly-added `cluster-vars` knob — so this one edge closes the race.
+  #
+  # `platform` is the ONLY Kustomization in the graph with no `dependsOn`; every other substituting
+  # consumer (platform-config, apps-wave-0/1/2, apps-vms, oauth2-proxy, headlamp, homepage, crafty,
+  # velero) chains transitively through it. One edge therefore protects the whole graph.
+  #
+  # TRADE-OFF — READ THIS BEFORE YOU CURSE IT: the root is now a GATE. A malformed manifest
+  # ANYWHERE under the root's path (clusters/<env>, which includes clusters/base) fails the root
+  # Kustomization and therefore stops `platform` and EVERYTHING downstream, where before this edge
+  # the rest of the graph would have kept reconciling. That is deliberate and fail-closed: a broken
+  # entrypoint should stop the line, not let consumers render against a half-applied variable set.
+  # No deadlock risk — the root runs `wait: false`, so it reaches Ready on APPLY success and never
+  # health-gates its own children (see clusters/dev/sync.yaml).
+  dependsOn:
+    - name: flux-system   # the ROOT Kustomization (sync.yaml) that applies cluster-vars
+    # THE CNI GATES THE TIER. Cilium was split out of ./platform into its own Kustomization
+    # (clusters/base/cilium.yaml, wait:true) so its health has its own Ready condition and its own
+    # suspend valve. This edge preserves the ordering that co-tenancy used to provide implicitly:
+    # nothing in `platform` — and therefore nothing anywhere downstream — reconciles until the CNI
+    # is healthy. It is also revision-gated, which is what makes the prune-safety argument above
+    # deterministic rather than a race.
+    - name: cilium
  sourceRef:
    kind: GitRepository
    name: flux-system
@@ -5,11 +5,144 @@
 # When Phase 7 is opened, `flux bootstrap ... --path=clusters/prod` points the prod cluster's Flux
 # here. Like dev, this overlay adds NO resources — it ONLY patches cluster-vars with prod-scoped
 # values (R-ENV-02). Promotion to prod is a change to THESE variables, never a base edit.
+#
+# *** PHASE-7 BLOCKER — READ BEFORE BOOTSTRAPPING PROD ***
+# `clusters/base/platform.yaml` now carries `dependsOn: [flux-system]` (the 2026-09-01 substitution-
+# race fix). That names the ROOT Kustomization, which clusters/dev supplies as `dev/sync.yaml`
+# (path ./clusters/dev). THIS overlay has no sync.yaml yet, so as written a prod bootstrap would
+# leave `platform` stuck on "dependency 'flux-system/flux-system' is not ready" FOREVER and nothing
+# downstream would reconcile. Phase 7 MUST add `clusters/prod/sync.yaml` — a copy of dev/sync.yaml
+# with `path: ./clusters/prod` — as part of opening this overlay. (Adding it now is deliberately NOT
+# done here: prod is design-only and its root object is the prod bring-up owner's call.)
 apiVersion: kustomize.config.k8s.io/v1beta1
 kind: Kustomization
 resources:
  - ../base
+  - sync.yaml          # self-managing root Kustomization -> ./clusters/prod (REQUIRED: see below)
 patches:
+  # --- SOPS decryption (operator decision 2026-09-01: prod uses the SAME age key as dev) ---
+  # Mirrors clusters/dev exactly, one stanza per Kustomization that carries encrypted Secrets.
+  # The `sops-age` Secret is created OUT OF BAND on the prod cluster
+  # (bootstrap/sops/install-age-key.sh) — referenced by NAME only, never inlined.
+  # Add a stanza here whenever `render.py --emit-waves` introduces a new deepest wave.
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: platform
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: apps-wave-0
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: apps-wave-1
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: apps-wave-2
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: oauth2-proxy
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: headlamp
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: crafty
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
+  - patch: |-
+      apiVersion: kustomize.toolkit.fluxcd.io/v1
+      kind: Kustomization
+      metadata:
+        name: velero
+        namespace: flux-system
+      spec:
+        decryption:
+          provider: sops
+          secretRef:
+            name: sops-age
+  # --- GitOps source (operator decision 2026-09-01: prod tracks the SAME BRANCH as dev) ---
+  #
+  # *** BOOTSTRAP BLOCKER — this URL CANNOT work on a cold prod cluster. READ BEFORE BRING-UP. ***
+  #
+  # Two independent reasons, both consequences of the split-horizon design:
+  #   1. SELF-HOSTING CIRCULARITY. Gitea runs ON THE DEV CLUSTER. Prod syncing from it means prod's
+  #      GitOps source lives inside the very cluster slated for decommission. Gitea must move to
+  #      prod (or off-cluster) BEFORE dev is retired, or prod loses its source of truth.
+  #   2. SPLIT-HORIZON DNS SENDS IT TO THE WRONG PLACE. platform/coredns/coredns-custom.yaml
+  #      answers the ENTIRE home.keithjackson.dev zone with ${GATEWAY_VIP}. On prod that is
+  #      192.168.2.20 — PROD's own gateway, where no Gitea is listening. Prod's Flux would resolve
+  #      gitea.home.keithjackson.dev to itself and never reach a repository.
+  #
+  # Bring-up therefore needs a TEMPORARY source (the bootstrap host-Gitea, or an off-cluster
+  # mirror), with a cutover to the in-cluster URL once Gitea actually runs on prod — exactly the
+  # sequence docs/05 describes for dev's own Phase-6 cutover. Tracked in PROD-PROVISIONING.md §7.
+  #
+  # The BRANCH below is settled and correct: prod tracks `main`, the same branch as dev.
+  # CONSEQUENCE, recorded deliberately: once prod is live, EVERY MERGE TO main RECONCILES BOTH
+  # CLUSTERS. There is no promotion step and no soak window — dev and prod move together.
+  - patch: |-
+      apiVersion: source.toolkit.fluxcd.io/v1
+      kind: GitRepository
+      metadata:
+        name: flux-system
+        namespace: flux-system
+      spec:
+        url: https://gitea.home.keithjackson.dev/Home-Network/home-network-k3s-impl.git
+        ref:
+          branch: main
  - target:
      kind: ConfigMap
      name: cluster-vars
@@ -0,0 +1,32 @@
+---
+# Self-managing ROOT Kustomization for PROD (mirrors clusters/dev/sync.yaml).
+#
+# Reconciles ./clusters/prod from the GitRepository so the ENTIRE prod graph — the cluster-vars
+# ConfigMap, the GitRepository source, platform / platform-config / the app waves, and THIS object
+# itself — is applied from git on every push. dev/sync.yaml carried the note "a prod overlay needs
+# its own sync.yaml -> ./clusters/prod"; this is it.
+#
+# WHY IT IS NOW LOAD-BEARING, not just symmetry: `clusters/base/platform.yaml` gained
+# `dependsOn: [flux-system]` (2026-09-01) to close the post-build substitution race — a dependent
+# cannot reconcile revision N until the ROOT has APPLIED revision N. Without this object there is no
+# `flux-system` Kustomization on prod, so `platform` would block forever on a dependency that does
+# not exist, and NOTHING downstream would ever reconcile.
+#
+# `wait: false` is deliberate and is what keeps the dependsOn edge deadlock-free: the root reaches
+# Ready on apply success without health-gating its children (platform does its own wait/health
+# gating). Do not "harden" this to true.
+apiVersion: kustomize.toolkit.fluxcd.io/v1
+kind: Kustomization
+metadata:
+  name: flux-system
+  namespace: flux-system
+spec:
+  interval: 10m
+  retryInterval: 2m
+  timeout: 5m
+  prune: true
+  wait: false
+  sourceRef:
+    kind: GitRepository
+    name: flux-system
+  path: ./clusters/prod
@@ -8,3 +8,22 @@ _artifacts/

 # Python bytecode from lib/ (status.py imports coverage.py); never committed.
 __pycache__/
+
+# --- THE ONE EXCEPTION: the committed run ledger (runs/) -------------------------------
+# `runs/<UTC>-<short-sha>/{report.junit.xml,run.log}` + `runs/ledger.jsonl` are the
+# machine-readable proof-of-pass record that lib/status.py's docstring asks for. They are
+# SOURCE, not regenerated artifacts: a run's evidence cannot be reconstructed after the
+# fact, so it must survive in git.
+#
+# The negations are needed because the ROOT .gitignore ignores `*.junit.xml` globally
+# (and `coverage/`). A deeper .gitignore overrides a shallower one, and nothing ignores
+# the `conformance/runs/` directory itself, so re-including the files here works (git
+# cannot re-include a file whose PARENT DIRECTORY is excluded — that is why this must not
+# live under _artifacts/).
+#
+# The run LOG is the load-bearing half: Chainsaw's JUnit carries no stdout, and the L2/L3
+# tests self-skip GREEN, so the sentinel token in run.log is the only thing separating
+# "proven" from "skipped". Never commit a report.junit.xml without its run.log.
+!runs/
+!runs/**
+!runs/**/*.junit.xml
@@ -22,6 +22,7 @@ behavioral / L3 fault-injection** (this harness).
 ./run.sh --lint                       # structural-validate test defs (no cluster)
 ./run.sh --strict-coverage            # hygiene gate: fail on tag/annotation drift
 ./run.sh --require-all                # phase-exit gate: every requirement must be covered
+./run.sh --record                     # run AND capture the evidence (see "Proof of pass")
 ```

 **Gating is scoped, not "all 51 always"** (R-TEST-03). Three distinct checks:
@@ -105,13 +106,89 @@ lib/
  common.sh                  tagging convention + test discovery/selection helpers
  coverage.py                requirement-coverage generator (stdlib only)
  status.py                  requirement-STATUS generator (stdlib only; --selftest)
+  record_run.py              run-ledger writer: PROOF-of-pass (stdlib only; --selftest)
  emit_skipped_junit.py      Phase-0 skipped-JUnit shim (no cluster)
+runs/
+  ledger.jsonl               TRACKED append-only proof-of-pass ledger (one row per
+                             testcase per run) — the only source status.py trusts
+  <UTC>-<short-sha>/         TRACKED per-run evidence: run.log + report.junit.xml
 tests/
  l1-rendering/  l2-behavioral/  l3-fault-injection/  meta/   (see tests/README.md)
 incluster/
  chainsaw-job.yaml  rbac.yaml   in-cluster L2/L3 Job + scoped test SA (ADR-0011)
 ```

+## Proof of pass — the run ledger (`runs/`)
+
+`--status` used to report **PROVEN: 0** for all 51 requirements, and said so honestly:
+proof-of-pass was not recoverable from repo state. `_artifacts/` is gitignored and the
+root `.gitignore` kills `*.junit.xml` globally, so no run result ever reached git; the
+only record of a green run was DECISIONS-LOG.md prose. `runs/` is the fix `lib/status.py`
+asked for — **a committed, machine-readable run ledger**.
+
+```bash
+./run.sh --record                     # runs normally, and captures the evidence
+# -> conformance/runs/<UTC>-<short-sha>/run.log            (tee'd, carries the sentinels)
+# -> conformance/runs/<UTC>-<short-sha>/report.junit.xml   (that run's JUnit)
+# -> conformance/runs/ledger.jsonl                         (one appended row per testcase)
+python3 lib/record_run.py --run-dir runs/<id> [--dry-run]  # or record an existing run dir
+python3 lib/record_run.py --selftest                       # deterministic, no cluster
+```
+
+**Recording is explicit, never implicit.** Plain `./run.sh` writes no ledger row: a run
+that silently records itself is how a bad run becomes a permanent false proof. **Commit
+the run dir and the ledger** — an uncommitted ledger proves nothing.
+
+### Why a committed JUnit alone would be WORSE than nothing
+
+The L2/L3 tests are runnable and **self-skipping**: when a precondition is missing (no
+`longhorn` StorageClass, no Velero CRDs, fewer than 3 Ready nodes) they echo a skip token
+and `exit 0`, and their `check:` accepts either outcome —
+
+```yaml
+(contains($stdout, 'DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK')
+ || contains($stdout, 'DR_RESTORE_SKIPPED_OK')): true
+```
+
+So **a self-skip exits 0 and Chainsaw records `passed` exactly as a real run does**, and
+Chainsaw's JUnit carries no stdout — its `<testcase>` elements hold only `<properties>`.
+A committed JUnit on its own would therefore record `DR_RESTORE_SKIPPED_OK` as *proof of
+R-STATE-03*: fake green, and worse than no ledger because it would look authoritative.
+
+**The sentinel token in `run.log` is the only thing that separates proven from skipped.**
+`record_run.py` derives each test's tokens from its own `chainsaw-test.yaml` (every
+`contains($stdout, 'TOKEN')`; `*_SKIP*_OK` is a skip token, the last non-skip token is the
+verdict token), so the table below is never hand-maintained:
+
+| Test | pass token (proof) | skip token (never proof) |
+|---|---|---|
+| `l3/node-loss` | `NODE_LOSS_VOLUME_AVAILABLE_OK` | `NODE_LOSS_SKIPPED_OK` |
+| `l3/dr-restore` | `DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK` (+ `OFF_CLUSTER_TARGET_OK`, `BACKUPS_ARE_SCHEDULED_OK`) | `DR_RESTORE_SKIPPED_OK`, `DR_SCHEDULE_SKIPPED_OK` |
+| `l3/data-survival` | `DATA_SURVIVED_OK` | `DATA_SURVIVAL_SKIPPED_OK` |
+| `l3/vm-data-survival` | `VM_DATA_SURVIVED_OK` | `VM_DATA_SURVIVAL_SKIPPED_OK` |
+| `l3/hands-off-update` | `HANDS_OFF_UPDATE_OK` | `HANDS_OFF_UPDATE_SKIPPED_OK` |
+| `l2/vm-lifecycle` | `VM_LIFECYCLE_OK` | `VM_LIFECYCLE_SKIPPED_OK` |
+| `l2/vm-default-deny` | `VM_DEFAULT_DENY_OK` | `VM_DEFAULT_DENY_SKIPPED_OK` |
+
+A row reaches `proof: "proven"` on **one** path: JUnit `passed`, **every** declared pass
+token present in that test's log lines, and **no** skip token anywhere in them. A skip
+token beats a pass token (worst wins). Anything else is `skipped`, `failed`,
+`junit-skipped`, `unknown-no-sentinel-declared` or `unknown-sentinel-absent` — all
+non-green. L0/L1 need no sentinel because `lib/run_l1_offline.py` already renders their
+skips as JUnit `<skipped/>`, never as a green pass.
+
+### Staleness — a proof is a claim about a tree, not a badge
+
+`--status` honours a `proven` row only while the run's `git_sha` is a **descendant of the
+last commit touching that requirement's implementing manifests or its verifying test**.
+Otherwise the row degrades to **`stale-proof`**, which is not green. A run captured from a
+dirty working tree is recorded as `<sha>-dirty`, which no ancestry check can satisfy — so
+it never counts. Re-run with `--record` to refresh.
+
+A requirement reads `proven` only when **every** verifying test does; one skipped, failed
+or unrecorded test drags the whole requirement down. With an empty ledger `--status`
+behaves exactly as before: every requirement `not-derivable`, headline **PROVEN 0**.
+
 ## How CI invokes it
 CI (Gitea Actions, wired in T-0.2 / migrated in T-6.1b) calls **this same `run.sh`**:

@@ -0,0 +1,949 @@
+#!/usr/bin/env python3
+"""Append a conformance RUN LEDGER row per testcase — the committed proof-of-pass record.
+
+WHY THIS EXISTS
+---------------
+`lib/status.py` reports PROOF as `not-derivable` for every requirement, and names its own
+fix in its docstring: *"a committed, machine-readable run ledger"*. There was none, because
+`conformance/_artifacts/` is git-ignored and the root `.gitignore` kills `*.junit.xml` and
+`coverage/` globally, so nothing about a green run ever reached repo state. This tool is
+that ledger's writer: it reads one run's JUnit + run log out of `conformance/runs/<run-id>/`
+and appends one JSON object per testcase to `conformance/runs/ledger.jsonl`, which IS
+tracked (see conformance/.gitignore for the negations that let it survive).
+
+THE TRAP THIS TOOL EXISTS TO AVOID — READ BEFORE CHANGING ANYTHING
+------------------------------------------------------------------
+The L2/L3 tests are RUNNABLE / SELF-SKIPPING: when a precondition is absent (no `longhorn`
+StorageClass, no Velero CRDs, <3 Ready nodes) they echo a skip token and `exit 0`, and their
+`check:` block is deliberately written to accept either outcome, e.g. tests/l3-fault-
+injection/dr-restore:
+
+    (contains($stdout, 'DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK')
+     || contains($stdout, 'DR_RESTORE_SKIPPED_OK')): true
+
+So a SELF-SKIP exits 0 and Chainsaw records `passed` EXACTLY as a real run does. And
+Chainsaw's JUnit carries no stdout — its `<testcase>` elements hold only `<properties>`
+(verified against the committed reports). Therefore:
+
+  *** A COMMITTED JUnit ALONE WOULD RECORD `DR_RESTORE_SKIPPED_OK` AS PROOF OF R-STATE-03. ***
+
+AND THE SECOND TRAP, WHICH IS THE MIRROR OF THE FIRST
+------------------------------------------------------
+Chainsaw echoes each script's SOURCE into an indented `=== COMMAND` block before running
+it, so `echo NODE_LOSS_SKIPPED_OK` — the skip branch that was NOT taken — is present in
+the log of every run of that test. A section-blind grep therefore reads a skip token out
+of the source of every skip-gated test and can never record `proven` for any of them: the
+ledger fails closed so completely that it records nothing and proves nothing. Tokens are
+consequently read from SECTIONS (see classify_sections): a pass token only from
+`=== STDOUT`, a skip token from any section that is not script source. Skip still beats
+pass — within genuine output, which is the only place either was ever evidence.
+
+That is the fake-green this project refuses, and it would be worse than no ledger at all
+because it would look authoritative. THE SENTINEL TOKEN IS THE ONLY THING THAT SEPARATES
+PROVEN FROM SKIPPED, AND IT EXISTS ONLY IN THE RUN LOG. Hence: this tool requires BOTH
+files, and for the Chainsaw layers it will NEVER emit `proof: "proven"` on a JUnit `passed`
+unless the log carries that test's own pass token and carries NO skip token.
+
+HOW THE TOKENS ARE OBTAINED (derived, never hand-listed)
+--------------------------------------------------------
+Hard-coding a token table would rot the moment a test is edited. Instead every token is
+parsed out of the test's own `chainsaw-test.yaml`: each `contains($stdout, 'TOKEN')` in a
+`check:` block is a declared sentinel. Classification is by the project's naming convention
+(`*_SKIP*_OK` is a skip token, anything else is a pass token), and the TERMINAL pass token
+— the last non-skip token in file order — is the test's verdict token. Edit a test's tokens
+and this tool follows automatically; delete them and the test simply becomes unprovable
+rather than silently proven.
+
+  node-loss   pass NODE_LOSS_VOLUME_AVAILABLE_OK              skip NODE_LOSS_SKIPPED_OK
+  dr-restore  pass DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK     skip DR_RESTORE_SKIPPED_OK
+              (+ OFF_CLUSTER_TARGET_OK, BACKUPS_ARE_SCHEDULED_OK / DR_SCHEDULE_SKIPPED_OK)
+
+WHY L0/L1 NEED NO SENTINEL (and why that is not a loophole)
+-----------------------------------------------------------
+The offline layers are not run by Chainsaw. `lib/run_l1_offline.py` shells out to each
+dir's `check.sh` / `render-check.sh` and maps exit 3 to a JUnit `<skipped/>` element and
+any other non-zero to `<failure>`. A self-skip there is ALREADY a JUnit skip, never a green
+pass, so the JUnit is a truthful record on its own. Only the Chainsaw layers (L2/L3/META)
+can express "skipped" as "passed", and only they require a sentinel — see
+SENTINEL_REQUIRED_LAYERS.
+
+LEDGER ROW (conformance/runs/ledger.jsonl — append-only, one object per testcase per run)
+  ts_utc            run-dir timestamp, else the JUnit's mtime      (when)
+  git_sha           `git rev-parse HEAD`, suffixed `-dirty` when tracked files were
+                    modified — a proof captured from a dirty tree is NOT honoured by
+                    status.py, because what ran is not what is committed  (what)
+  env               --env / CONF_ENV (cluster overlay the run targeted)
+  chainsaw_version  CHAINSAW_VERSION from versions.env (the pin IS the truth)
+  kube_version      `kubectl version` server gitVersion, else "unknown"
+  layer             L0|L1|L2|L3|META, from the test's `layer` annotation / JUnit property
+  test              testcase name (== the test dir basename, asserted by convention)
+  requirements[]    the `conformance.home.k3s/R-*` labels on the test — the SAME
+                    authoritative source coverage.py uses, not the JUnit classname
+  junit_result      passed | failed | error | skipped
+  sentinel          the DECIDING token grepped from run.log, or null
+  proof             proven | skipped | failed | junit-skipped
+                    | unknown-no-sentinel-declared | unknown-sentinel-absent
+  run_id            the runs/<dir> name (provenance: which log backs this row)
+  note              one line saying WHY this row landed on that proof state
+
+`proven` is emitted on exactly one path (see decide()); every other path is non-green.
+
+RECORDING IS EXPLICIT, NEVER IMPLICIT
+-------------------------------------
+Invoke this tool by hand, or via `run.sh --record`. A run that silently records itself is
+how a bad run becomes a permanent false proof, so `run.sh` without `--record` writes no
+ledger row at all.
+
+EXIT CODES (ci/lib.sh convention: 0 pass / 1 fail / 3 skipped-not-green)
+  0  rows appended.
+  1  a real failure: unparsable JUnit, unreadable test tree, unwritable ledger.
+  3  the inputs a ledger row needs are absent (no report.junit.xml, or no run.log).
+     NOTHING is recorded and this is NEVER green — a run we cannot evidence is not a run.
+
+Pure standard library, matching the harness's no-pip-dependency posture (coverage.py,
+status.py). PyYAML lives in catalog/render.py; the harness does not depend on it.
+"""
+from __future__ import annotations
+
+import argparse
+import json
+import os
+import re
+import subprocess
+import sys
+import time
+import xml.etree.ElementTree as ET
+from pathlib import Path
+
+_LIB = Path(__file__).resolve().parent
+if str(_LIB) not in sys.path:
+    sys.path.insert(0, str(_LIB))
+# Importing a sibling would otherwise litter conformance/lib/__pycache__/ into the working
+# tree, and the lint stage scans untracked files. Same guard as status.py.
+sys.dont_write_bytecode = True
+import coverage as cov  # noqa: E402  — reuse the registry/test parsers, don't fork them
+
+CONF_ROOT = _LIB.parent
+REPO_ROOT = CONF_ROOT.parent
+DEFAULT_LEDGER = CONF_ROOT / "runs" / "ledger.jsonl"
+
+# The ONLY layers exempt from needing a pass sentinel: the offline ones, whose skips
+# lib/run_l1_offline.py already renders as JUnit <skipped/> rather than as a green pass
+# (see docstring). Written as an EXEMPT set, not a REQUIRED set, so that an unrecognised
+# or new layer fails CLOSED — it needs a sentinel — instead of quietly becoming provable
+# by JUnit alone.
+SENTINEL_EXEMPT_LAYERS = frozenset({"L0", "L1"})
+
+# Layer from the test's subtree. Authoritative over the annotation: coverage.py's layer
+# regex stops at the first non-[L/A/M/0-9] character, so `layer: "META"` parses as "M" —
+# harmless for its own report, but here a mis-read layer decides whether a sentinel is
+# required at all, so it is derived from the path exactly as emit_skipped_junit.py does.
+_LAYER_BY_SUBTREE = (("/l0-static/", "L0"), ("/l1-rendering/", "L1"),
+                     ("/l2-behavioral/", "L2"), ("/l3-fault-injection/", "L3"),
+                     ("/meta/", "META"))
+
+
+def layer_of(path: Path) -> str:
+    rel = str(path)
+    for frag, layer in _LAYER_BY_SUBTREE:
+        if frag in rel:
+            return layer
+    return ""
+
+# A declared sentinel: `contains($stdout, 'TOKEN')` inside a Chainsaw `check:` block.
+# Both quote styles are accepted; the repo uses single quotes throughout.
+_SENTINEL_RE = re.compile(r"contains\(\s*\$stdout\s*,\s*['\"]([A-Za-z0-9_]+)['\"]\s*\)")
+
+# Naming convention for a SKIP token (tests/l3-fault-injection/*: NODE_LOSS_SKIPPED_OK,
+# DR_RESTORE_SKIPPED_OK, DR_SCHEDULE_SKIPPED_OK, VM_DATA_SURVIVAL_SKIPPED_OK, ...).
+# Deliberately broad: mis-classifying a PASS token as a skip only ever loses a proof;
+# mis-classifying a SKIP token as a pass would manufacture one.
+_SKIP_TOKEN_RE = re.compile(r"_SKIP")
+
+# A Chainsaw log line header, as it really appears (Go `t.Log` prefixes the source site and
+# pads it with backspaces, and the fields are ANSI-coloured — both are stripped first):
+#     l.go:52: | 23:51:18 | node-loss | volume-stays-available... | SCRIPT | LOG |
+# Field 2 is the test name; it is how output is attributed back to a testcase. The
+# `<file>.go:<line>:` prefix is optional so a redirected/plain log still attributes.
+_LOG_HEADER_RE = re.compile(
+    r"^\s*(?:[\w./-]+\.go:\d+:\s*)?"
+    r"\|\s*\d{1,2}:\d{2}:\d{2}(?:\.\d+)?\s*\|\s*([A-Za-z0-9][A-Za-z0-9._-]*)\s*\|")
+
+# ANSI colour + the backspace padding Go writes ahead of a `t.Log` continuation. Stripped
+# before ANY parsing; neither ever appears at the head of a line, so indentation survives.
+_ANSI_RE = re.compile(r"\x1b\[[0-9;]*[A-Za-z]")
+
+
+def _strip_noise(line: str) -> str:
+    return _ANSI_RE.sub("", line).replace("\b", "")
+
+
+# ===================================================================== output sections
+# THE BUG THIS SECTION MACHINERY EXISTS TO KILL — READ BEFORE CHANGING ANYTHING
+# -----------------------------------------------------------------------------
+# Chainsaw echoes the script it is ABOUT TO RUN, verbatim, in an indented `=== COMMAND`
+# block, and only afterwards prints what the script actually wrote in `=== STDOUT`. Every
+# skip-gated test contains its own skip token as SOURCE TEXT (`echo NODE_LOSS_SKIPPED_OK`),
+# so a raw whole-log grep finds that token in EVERY run of that test — including runs that
+# never took the skip branch. Combined with decide()'s (correct) rule that a skip token
+# outranks a pass token, a section-blind scan can never record `proven` for ANY test that
+# has a skip gate: the ledger fails closed so hard it records nothing. Observed on
+# runs/20260901T235117Z-e9a4b66, where NODE_LOSS_SKIPPED_OK appears twice as source at
+# lines 51/62 (`=== COMMAND`) and never in output, yet the run genuinely proved R-STATE-02.
+#
+# So tokens are attributed to SECTIONS, never to raw lines:
+#     l.go:52: | 23:51:18 | node-loss | step | CMD    | RUN |     <- header, no section
+#         === COMMAND                                            <- marker (indent 8)
+#         /usr/bin/sh -c set -euo pipefail                       <- source, indent >= 8
+#           echo NODE_LOSS_SKIPPED_OK                            <- SOURCE, not output
+#     l.go:52: | 23:52:42 | node-loss | step | SCRIPT | LOG |    <- indent 4 => section ends
+#         === STDOUT                                             <- marker
+#         NODE_LOSS_VOLUME_AVAILABLE_OK                          <- the REAL emission
+#
+# A marker is an INDENTED `=== NAME` on a line of its own. Go's own test markers
+# (`=== RUN   chainsaw`, `=== PAUSE`, `=== CONT`) are at column 0 and carry a test name
+# after the verb, so they match neither the indent nor the end-of-line anchor; they are
+# additionally named in _GO_TEST_MARKERS so a future indented variant still cannot open a
+# section that would swallow the whole log.
+_SECTION_MARKER_RE = re.compile(r"^(\s+)=== ([A-Z][A-Z0-9_]*)\s*$")
+_GO_TEST_MARKERS = frozenset({"RUN", "PAUSE", "CONT"})
+
+# Pseudo-section for a log that contains NO section markers at all (the plain/redirected
+# logs the earlier ledger rows were written from, and the selftest fixtures). Such a log
+# never echoes script source, so there is nothing to be confused by and the legacy
+# whole-log scan is exactly as safe as it was — narrowing is only needed where a COMMAND
+# echo exists. Lines OUTSIDE a section in a log that DOES use sections are attributed to
+# "" and are evidence for nothing.
+UNSECTIONED = "*"
+
+# A pass token counts ONLY where Chainsaw's own `contains($stdout, ...)` check looks:
+# real stdout. Anything else — source echo, stderr, an unrecognised future section — can
+# never manufacture a proof.
+PASS_SECTIONS = frozenset({"STDOUT", UNSECTIONED})
+
+# Sections that carry SOURCE rather than output. A skip token is honoured in every OTHER
+# section (STDOUT, STDERR, any section name added by a later Chainsaw release), because
+# over-reading a skip only ever COSTS a proof, while over-reading a pass would fabricate
+# one. Unknown section names therefore fail closed in both directions.
+SOURCE_SECTIONS = frozenset({"COMMAND"})
+
+
+def classify_sections(log_text: str) -> list[tuple[str, str]]:
+    """[(section, line)] for every line of a run log.
+
+    `section` is the enclosing `=== NAME` block, "" for a line inside no block, or
+    UNSECTIONED for every line when the log declares no sections at all. A block runs from
+    its marker until the first non-blank line indented LESS than the marker (blank lines do
+    not end it) or until the next marker; the marker line itself is content of nothing.
+    """
+    rows: list[tuple[str, str]] = []
+    cur, cur_indent, sectioned = "", 0, False
+    for raw in log_text.splitlines():
+        line = _strip_noise(raw)
+        m = _SECTION_MARKER_RE.match(line)
+        if m and m.group(2) not in _GO_TEST_MARKERS:
+            sectioned = True
+            cur, cur_indent = m.group(2), len(m.group(1))
+            rows.append(("", line))
+            continue
+        if cur:
+            if not line.strip() or len(line) - len(line.lstrip()) >= cur_indent:
+                rows.append((cur, line))
+                continue
+            cur = ""
+        rows.append(("", line))
+    if not sectioned:
+        return [(UNSECTIONED, line) for _, line in rows]
+    return rows
+
+
+def scan_texts(lines) -> tuple[str, str]:
+    """(text a PASS token may be read from, text a SKIP token may be read from).
+
+    Accepts either [(section, line)] pairs from classify_sections() or a plain list of
+    strings, which is treated as an unsectioned log (legacy whole-log scanning).
+    """
+    pass_lines, skip_lines = [], []
+    for item in lines:
+        section, line = item if isinstance(item, tuple) else (UNSECTIONED, item)
+        if section in PASS_SECTIONS:
+            pass_lines.append(line)
+        if section and section not in SOURCE_SECTIONS:
+            skip_lines.append(line)
+    return "\n".join(pass_lines), "\n".join(skip_lines)
+
+_RUN_ID_TS_RE = re.compile(r"^(\d{8}T\d{6}Z)-")
+
+
+# ========================================================================= sentinels
+def parse_sentinels(test_yaml: Path) -> dict:
+    """Declared sentinel tokens of one Chainsaw test, derived from the test file itself.
+
+    Returns {"pass": [...], "skip": [...], "terminal_pass": str|None}. `terminal_pass` is
+    the LAST non-skip token in file order — the test's verdict token, i.e. the one its
+    final `check:` block asserts (dr-restore -> DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK).
+    A test with no `contains($stdout, ...)` assertion declares no sentinel and is reported
+    unprovable rather than proven; see decide().
+    """
+    try:
+        text = test_yaml.read_text()
+    except (OSError, UnicodeDecodeError):
+        return {"pass": [], "skip": [], "terminal_pass": None}
+    toks = _SENTINEL_RE.findall(text)
+    passes, skips = [], []
+    for t in toks:
+        (skips if _SKIP_TOKEN_RE.search(t) else passes).append(t)
+    # De-duplicate, preserving order (dr-restore names DR_RESTORE_SKIPPED_OK twice).
+    def uniq(xs: list[str]) -> list[str]:
+        return list(dict.fromkeys(xs))
+    passes, skips = uniq(passes), uniq(skips)
+    return {"pass": passes, "skip": skips,
+            "terminal_pass": passes[-1] if passes else None}
+
+
+def sentinel_map(tests_dir: Path) -> dict[str, dict]:
+    """{test-name: sentinels} for every test in the tree.
+
+    Keyed on the Chainsaw `metadata.name`, which is what lands in the JUnit `<testcase
+    name=...>`. This repo keeps that equal to the test's directory basename; the mapping
+    is by name, so it stays correct if that ever drifts.
+    """
+    out: dict[str, dict] = {}
+    for f in sorted(tests_dir.rglob("chainsaw-test.yaml")):
+        meta = cov.parse_test(f)
+        name = meta["name"] or f.parent.name
+        s = parse_sentinels(f)
+        s["dir"] = str(f.parent)
+        s["layer"] = layer_of(f) or meta["layer"]
+        s["requirements"] = meta["labels"]
+        out[name] = s
+    return out
+
+
+# =============================================================================== log
+def attribute_log(log_text: str, known: set[str]) -> tuple[dict[str, list[tuple[str, str]]],
+                                                            bool]:
+    """Split a run log into per-testcase buckets of (section, line) pairs.
+
+    Chainsaw prefixes its log lines with `| HH:MM:SS | <test> | <step> | ...` and prints a
+    script's sections underneath that header, so the test name is carried by a state
+    machine: a header naming a KNOWN test switches the current bucket, every following line
+    lands in it. Requiring the name to be known is what stops run.sh's own `[run.sh]`
+    chatter (and any other pipe-shaped line) from opening a bogus bucket.
+
+    Section labels come from classify_sections() and travel WITH the lines, so a bucket
+    still knows which of its lines were script source and which were real output.
+
+    Returns (buckets, attributed) where `attributed` is False when the log contained no
+    recognisable header at all — the signal for the degraded global scan in decide().
+    """
+    buckets: dict[str, list[tuple[str, str]]] = {}
+    cur: str | None = None
+    attributed = False
+    for section, line in classify_sections(log_text):
+        m = _LOG_HEADER_RE.match(line)
+        if m and m.group(1) in known:
+            cur = m.group(1)
+            attributed = True
+        if cur is not None:
+            buckets.setdefault(cur, []).append((section, line))
+    return buckets, attributed
+
+
+def unique_tokens(smap: dict[str, dict]) -> set[str]:
+    """Tokens claimed by EXACTLY ONE test in the tree.
+
+    Only these may be used by the degraded global scan: `DNS_OK` is echoed by two different
+    tests, so in an unattributable log it can never be evidence for either; but
+    `NODE_LOSS_VOLUME_AVAILABLE_OK` names precisely one test and still can.
+    """
+    owners: dict[str, set[str]] = {}
+    for name, s in smap.items():
+        for t in s["pass"] + s["skip"]:
+            owners.setdefault(t, set()).add(name)
+    return {t for t, o in owners.items() if len(o) == 1}
+
+
+# ============================================================================ decide
+def decide(layer: str, junit_result: str, sent: dict, lines: list[str],
+           scope: str) -> tuple[str | None, str, str]:
+    """The ONE place a testcase becomes `proven` — or, far more often, does not.
+
+    Returns (sentinel, proof, note).
+
+    Ordering is worst-first ON PURPOSE, so that ambiguity can only ever cost a proof:
+      1. JUnit failure/error            -> failed        (a red run is recorded as red)
+      2. JUnit <skipped/>               -> junit-skipped  (never green; ci/lib.sh rule)
+      3. ANY declared skip token seen   -> skipped        (BEATS a green JUnit and beats
+           IN REAL OUTPUT                                  the pass token: if any gated
+                                                           step self-skipped, the run did
+                                                           not prove the requirement)
+      4. no sentinel declared           -> proven only for L0/L1, whose skips are already
+                                           JUnit skips; unknown-no-sentinel-declared for
+                                           the Chainsaw layers
+      5. EVERY declared pass token seen -> proven
+      6. anything else                  -> unknown-sentinel-absent
+    Step 5 requires ALL pass tokens, not just the terminal one: every Chainsaw step here
+    asserts `pass || skip`, so a missing pass token means a step did not reach its proven
+    branch, whatever the JUnit says.
+
+    Steps 3 and 5 read from SECTION-SCOPED text, never from raw lines: a pass token counts
+    only in `=== STDOUT`, a skip token counts in any section that is not script source.
+    That narrows WHERE a token is read from and changes nothing about what it means — skip
+    still outranks pass, and it outranks it within genuine output, which is the only place
+    either of them was ever evidence. `lines` may be [(section, line)] pairs or plain
+    strings (an unsectioned log; see scan_texts / UNSECTIONED).
+    """
+    if junit_result in ("failed", "error"):
+        return (None, "failed", f"JUnit recorded {junit_result}")
+    if junit_result == "skipped":
+        return (None, "junit-skipped",
+                "JUnit <skipped/> — the test did not execute; a skip is never green")
+
+    pass_text, skip_text = scan_texts(lines)
+    seen_skip = [t for t in sent["skip"] if t in skip_text]
+    if seen_skip:
+        return (seen_skip[0], "skipped",
+                f"run log OUTPUT carries the SELF-SKIP token {seen_skip[0]!r} — the test "
+                f"exited 0 without exercising the behaviour, so this is NOT proof")
+
+    if not sent["pass"] and not sent["skip"]:
+        if layer not in SENTINEL_EXEMPT_LAYERS:
+            return (None, "unknown-no-sentinel-declared",
+                    f"{layer or 'unknown-layer'} test declares no contains($stdout, ...) "
+                    f"sentinel, so a green JUnit cannot be told apart from a self-skip — "
+                    f"refusing to call it proven")
+        return (None, "proven",
+                f"{layer} offline check exited 0; run_l1_offline.py renders its skips as "
+                f"JUnit <skipped/>, so a green JUnit is truthful without a sentinel")
+
+    missing = [t for t in sent["pass"] if t not in pass_text]
+    if not missing:
+        return (sent["terminal_pass"], "proven",
+                f"run log OUTPUT carries every declared pass token "
+                f"({', '.join(sent['pass'])}) and no skip token [{scope}]")
+    return (None, "unknown-sentinel-absent",
+            f"run log OUTPUT lacks pass token(s) {', '.join(missing)} for this test "
+            f"[{scope}] — refusing to infer proof from the JUnit alone")
+
+
+# ============================================================================= junit
+def junit_cases(path: Path) -> list[dict]:
+    """[{name, layer, requirements, result}] for every <testcase> in a JUnit report."""
+    root = ET.parse(path).getroot()
+    cases: list[dict] = []
+    for c in root.iter("testcase"):
+        if c.find("failure") is not None:
+            result = "failed"
+        elif c.find("error") is not None:
+            result = "error"
+        elif c.find("skipped") is not None:
+            result = "skipped"
+        else:
+            result = "passed"
+        props = {p.get("name"): (p.get("value") or "")
+                 for p in c.iter("property") if p.get("name")}
+        reqs = sorted(set(cov.RID_RE.findall(props.get("requirements", ""))))
+        layer = (props.get("layer") or "").upper()
+        if not layer:
+            layer = (c.get("classname") or "").split(":", 1)[0].upper()
+        cases.append({"name": c.get("name") or "?", "layer": layer,
+                      "requirements": reqs, "result": result})
+    return cases
+
+
+# =============================================================================== git
+def git_sha(repo: Path) -> str:
+    """HEAD, suffixed `-dirty` when TRACKED files differ from it.
+
+    Untracked files are deliberately ignored, matching status.py's `tracked_files()`
+    posture (untracked scratch is not repo state) — and because a `--record` run creates
+    untracked `runs/<id>/` files as it goes, which would otherwise mark every run dirty.
+    A `-dirty` sha is not a valid rev, so status.py's ancestry check cannot resolve it and
+    the proof degrades to `stale-proof`: correct, since what ran is not what is committed.
+    """
+    try:
+        sha = subprocess.run(["git", "-C", str(repo), "rev-parse", "HEAD"],
+                             capture_output=True, text=True, check=True).stdout.strip()
+    except (subprocess.CalledProcessError, OSError):
+        return "unknown"
+    dirty = subprocess.run(["git", "-C", str(repo), "diff", "--quiet", "HEAD", "--"],
+                           capture_output=True).returncode != 0
+    return f"{sha}-dirty" if dirty else sha
+
+
+def pinned_chainsaw_version(conf_root: Path) -> str:
+    """CHAINSAW_VERSION from versions.env — the pin is the single source of truth."""
+    f = conf_root / "versions.env"
+    if f.is_file():
+        m = re.search(r'^CHAINSAW_VERSION="?([^"\n]+)"?', f.read_text(), re.M)
+        if m:
+            return m.group(1)
+    return "unknown"
+
+
+def server_kube_version() -> str:
+    """Server gitVersion via `kubectl version` (read-only), else "unknown"."""
+    for args in (["kubectl", "version", "-o", "json"],
+                 ["kubectl", "version", "--output=json"]):
+        try:
+            p = subprocess.run(args, capture_output=True, text=True, timeout=15)
+        except (OSError, subprocess.TimeoutExpired):
+            continue
+        if p.returncode != 0 or not p.stdout.strip():
+            continue
+        try:
+            v = json.loads(p.stdout).get("serverVersion") or {}
+        except json.JSONDecodeError:
+            continue
+        if v.get("gitVersion"):
+            return v["gitVersion"]
+    return "unknown"
+
+
+def run_timestamp(run_dir: Path, junit: Path) -> str:
+    """UTC stamp: the run-dir name's own `<UTC>-<sha>` prefix, else the JUnit's mtime."""
+    m = _RUN_ID_TS_RE.match(run_dir.name)
+    if m:
+        t = m.group(1)
+        return f"{t[0:4]}-{t[4:6]}-{t[6:8]}T{t[9:11]}:{t[11:13]}:{t[13:15]}Z"
+    return time.strftime("%Y-%m-%dT%H:%M:%SZ", time.gmtime(junit.stat().st_mtime))
+
+
+# ============================================================================ record
+def build_rows(run_dir: Path, tests_dir: Path, env: str, chainsaw_version: str,
+               kube_version: str, sha: str) -> list[dict]:
+    junit = run_dir / "report.junit.xml"
+    log = run_dir / "run.log"
+    smap = sentinel_map(tests_dir)
+    log_text = log.read_text(errors="replace")
+    buckets, attributed = attribute_log(log_text, set(smap))
+    uniq = unique_tokens(smap)
+    all_pairs = classify_sections(log_text)
+    sectioned = any(sec not in ("", UNSECTIONED) for sec, _ in all_pairs)
+    section_note = ("tokens read from real-output sections only"
+                    if sectioned else "log declares no === sections; whole-log scan")
+    ts = run_timestamp(run_dir, junit)
+
+    rows: list[dict] = []
+    for case in junit_cases(junit):
+        name = case["name"]
+        sent = smap.get(name, {"pass": [], "skip": [], "terminal_pass": None,
+                               "layer": case["layer"], "requirements": []})
+        layer = sent.get("layer") or case["layer"] or "?"
+        # Requirements come from the test's LABELS (coverage.py's authoritative source);
+        # the JUnit property is the fallback for a testcase with no matching test file.
+        reqs = sent.get("requirements") or case["requirements"]
+
+        if name in buckets:
+            lines, scope = buckets[name], f"log scoped to this testcase; {section_note}"
+        elif not attributed:
+            # Degraded mode: the log had no recognisable Chainsaw header (a redirected or
+            # reformatted log). Fall back to a whole-log scan, but ONLY for tokens owned by
+            # exactly one test, so a token another test emitted can never prove this one.
+            lines = all_pairs
+            sent = dict(sent,
+                        **{"pass": [t for t in sent["pass"] if t in uniq],
+                           "skip": [t for t in sent["skip"] if t in uniq]})
+            sent["terminal_pass"] = sent["pass"][-1] if sent["pass"] else None
+            scope = ("DEGRADED: unattributable log, globally-unique tokens only; "
+                     + section_note)
+        else:
+            lines, scope = [], "no log lines attributed to this testcase"
+
+        sentinel, proof, note = decide(layer, case["result"], sent, lines, scope)
+        rows.append({
+            "ts_utc": ts,
+            "git_sha": sha,
+            "env": env,
+            "chainsaw_version": chainsaw_version,
+            "kube_version": kube_version,
+            "layer": layer,
+            "test": name,
+            "requirements": reqs,
+            "junit_result": case["result"],
+            "sentinel": sentinel,
+            "proof": proof,
+            "run_id": run_dir.name,
+            "note": note,
+        })
+    return rows
+
+
+def append_rows(ledger: Path, rows: list[dict]) -> None:
+    """Append-only, one compact JSON object per line. Never rewrites existing rows."""
+    ledger.parent.mkdir(parents=True, exist_ok=True)
+    with ledger.open("a", encoding="utf-8") as fh:
+        for r in rows:
+            fh.write(json.dumps(r, sort_keys=True) + "\n")
+
+
+# ========================================================================== selftest
+def _selftest() -> int:
+    """Deterministic, no-cluster self-test of every decision rule (house pattern:
+    `status.py --selftest`, `catalog/render.py --selftest`). Throwaway tree only.
+
+    The load-bearing case is `SKIP sentinel does NOT produce proven`: it is the single
+    assertion standing between this ledger and a permanent false proof of R-STATE-03.
+    """
+    import tempfile
+    ok = True
+
+    def check(label: str, cond: bool) -> None:
+        nonlocal ok
+        if not cond:
+            sys.stderr.write(f"record_run.py selftest: FAIL — {label}\n")
+            ok = False
+
+    # --- token derivation, against the dr-restore/node-loss shape ---------------------
+    with tempfile.TemporaryDirectory() as td:
+        root = Path(td)
+        tdir = root / "tests" / "l3-fault-injection" / "dr-restore"
+        tdir.mkdir(parents=True)
+        (tdir / "chainsaw-test.yaml").write_text(
+            "apiVersion: chainsaw.kyverno.io/v1alpha1\nkind: Test\nmetadata:\n"
+            "  name: dr-restore\n  labels:\n"
+            "    conformance.home.k3s/R-STATE-03: \"true\"\n  annotations:\n"
+            "    conformance.home.k3s/requirements: \"R-STATE-03\"\n"
+            "    conformance.home.k3s/layer: \"L3\"\nspec:\n  steps:\n"
+            "    - script:\n        content: 'echo OFF_CLUSTER_TARGET_OK'\n"
+            "        check:\n"
+            "          (contains($stdout, 'OFF_CLUSTER_TARGET_OK')"
+            " || contains($stdout, 'DR_RESTORE_SKIPPED_OK')): true\n"
+            "    - script:\n        content: 'echo x'\n        check:\n"
+            "          (contains($stdout, 'DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK')"
+            " || contains($stdout, 'DR_RESTORE_SKIPPED_OK')): true\n")
+        s = parse_sentinels(tdir / "chainsaw-test.yaml")
+        check("pass tokens derived from the test file",
+              s["pass"] == ["OFF_CLUSTER_TARGET_OK",
+                            "DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"])
+        check("skip token classified by the *_SKIP*_OK convention, de-duplicated",
+              s["skip"] == ["DR_RESTORE_SKIPPED_OK"])
+        check("terminal pass token is the LAST non-skip token",
+              s["terminal_pass"] == "DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK")
+
+        smap = sentinel_map(root / "tests")
+        check("sentinel_map keys on metadata.name and carries layer + labels",
+              smap["dr-restore"]["layer"] == "L3"
+              and smap["dr-restore"]["requirements"] == ["R-STATE-03"])
+
+    # --- decide(): the SKIP-is-never-proven contract ----------------------------------
+    l3 = {"pass": ["DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"],
+          "skip": ["DR_RESTORE_SKIPPED_OK"],
+          "terminal_pass": "DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"}
+
+    # *** THE CASE THIS WHOLE FILE EXISTS FOR ***
+    sent, proof, _ = decide("L3", "passed", l3, ["DR_RESTORE_SKIPPED_OK"], "t")
+    check("SKIP sentinel on a GREEN JUnit is 'skipped', NEVER 'proven'",
+          proof == "skipped" and sent == "DR_RESTORE_SKIPPED_OK")
+
+    _, proof, _ = decide("L3", "passed", l3,
+                         ["DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"], "t")
+    check("pass sentinel on a green JUnit is 'proven'", proof == "proven")
+
+    _, proof, _ = decide("L3", "passed", l3,
+                         ["DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK",
+                          "DR_RESTORE_SKIPPED_OK"], "t")
+    check("a skip token BEATS a pass token in the same log (worst wins)",
+          proof == "skipped")
+
+    _, proof, _ = decide("L3", "passed", l3, ["nothing relevant here"], "t")
+    check("green JUnit with no sentinel in the log is unknown, not proven",
+          proof == "unknown-sentinel-absent")
+
+    _, proof, _ = decide("L3", "passed", l3, [], "t")
+    check("green JUnit with NO log lines attributed is unknown, not proven",
+          proof == "unknown-sentinel-absent")
+
+    _, proof, _ = decide("L3", "failed", l3,
+                         ["DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK"], "t")
+    check("a failing JUnit outranks a pass token in the log", proof == "failed")
+
+    _, proof, _ = decide("L3", "skipped", l3, [], "t")
+    check("JUnit <skipped/> records junit-skipped, never green",
+          proof == "junit-skipped")
+
+    multi = {"pass": ["A_OK", "B_OK"], "skip": [], "terminal_pass": "B_OK"}
+    _, proof, _ = decide("L3", "passed", multi, ["B_OK"], "t")
+    check("every declared pass token must be present, not just the terminal one",
+          proof == "unknown-sentinel-absent")
+    _, proof, _ = decide("L3", "passed", multi, ["A_OK", "B_OK"], "t")
+    check("all pass tokens present == proven", proof == "proven")
+
+    none = {"pass": [], "skip": [], "terminal_pass": None}
+    _, proof, _ = decide("L2", "passed", none, ["whatever"], "t")
+    check("a Chainsaw test declaring no sentinel is NOT proven by a green JUnit",
+          proof == "unknown-no-sentinel-declared")
+    _, proof, _ = decide("L1", "passed", none, [], "t")
+    check("L0/L1 offline checks are proven by JUnit (their skips are JUnit skips)",
+          proof == "proven")
+    _, proof, _ = decide("L0", "skipped", none, [], "t")
+    check("an L0 JUnit skip is still never green", proof == "junit-skipped")
+    _, proof, _ = decide("META", "passed", none, [], "t")
+    check("META (a Chainsaw layer) needs a sentinel like L2/L3",
+          proof == "unknown-no-sentinel-declared")
+    _, proof, _ = decide("", "passed", none, [], "t")
+    check("an unknown/blank layer fails CLOSED — sentinel required",
+          proof == "unknown-no-sentinel-declared")
+
+    # --- SECTION SCOPING: the COMMAND echo is SOURCE, never evidence -------------------
+    # Regression cases for the ledger's first real L3 run, which recorded a genuine PASS as
+    # `skipped` because `echo NODE_LOSS_SKIPPED_OK` — the skip branch NOT taken — is echoed
+    # inside `=== COMMAND` on every run of a skip-gated test.
+    nl = {"pass": ["NODE_LOSS_VOLUME_AVAILABLE_OK"],
+          "skip": ["NODE_LOSS_SKIPPED_OK"],
+          "terminal_pass": "NODE_LOSS_VOLUME_AVAILABLE_OK"}
+    _CMD = ("    l.go:52: | 23:51:18 | node-loss | step | CMD    | RUN |\n"
+            "        === COMMAND\n"
+            "        /usr/bin/sh -c set -euo pipefail\n"
+            "        if ! kubectl get storageclass longhorn >/dev/null 2>&1; then\n"
+            "          echo NODE_LOSS_SKIPPED_OK\n"
+            "\n"
+            "          exit 0\n"
+            "        fi\n"
+            "        echo NODE_LOSS_VOLUME_AVAILABLE_OK\n"
+            "    l.go:52: | 23:52:42 | node-loss | step | SCRIPT | LOG |\n")
+
+    ran = classify_sections(_CMD + "        === STDOUT\n"
+                            "        ready nodes: 3\n"
+                            "        NODE_LOSS_VOLUME_AVAILABLE_OK\n"
+                            "    l.go:52: | 23:52:42 | node-loss | step | SCRIPT | DONE |\n")
+    sent, proof, _ = decide("L3", "passed", nl, ran, "t")
+    check("skip token ONLY in the COMMAND echo + pass token in STDOUT is PROVEN",
+          proof == "proven" and sent == "NODE_LOSS_VOLUME_AVAILABLE_OK")
+
+    selfskipped = classify_sections(_CMD + "        === STDOUT\n"
+                                    "        SKIP: 'longhorn' StorageClass absent\n"
+                                    "        NODE_LOSS_SKIPPED_OK\n")
+    sent, proof, _ = decide("L3", "passed", nl, selfskipped, "t")
+    check("skip token GENUINELY in STDOUT is still 'skipped' (the guarantee holds)",
+          proof == "skipped" and sent == "NODE_LOSS_SKIPPED_OK")
+
+    neither = classify_sections(_CMD + "        === STDOUT\n        ready nodes: 3\n")
+    _, proof, _ = decide("L3", "passed", nl, neither, "t")
+    check("both tokens in COMMAND and neither in STDOUT is NOT proven",
+          proof == "unknown-sentinel-absent")
+
+    both_out = classify_sections("        === STDOUT\n"
+                                 "        NODE_LOSS_VOLUME_AVAILABLE_OK\n"
+                                 "        NODE_LOSS_SKIPPED_OK\n")
+    _, proof, _ = decide("L3", "passed", nl, both_out, "t")
+    check("skip still BEATS pass when both are in genuine output", proof == "skipped")
+
+    stderr_skip = classify_sections("        === STDERR\n        NODE_LOSS_SKIPPED_OK\n"
+                                    "        === STDOUT\n"
+                                    "        NODE_LOSS_VOLUME_AVAILABLE_OK\n")
+    _, proof, _ = decide("L3", "passed", nl, stderr_skip, "t")
+    check("a skip token in a non-source section (STDERR) still costs the proof",
+          proof == "skipped")
+
+    stderr_pass = classify_sections("        === STDERR\n"
+                                    "        NODE_LOSS_VOLUME_AVAILABLE_OK\n")
+    _, proof, _ = decide("L3", "passed", nl, stderr_pass, "t")
+    check("a pass token OUTSIDE stdout cannot prove anything",
+          proof == "unknown-sentinel-absent")
+
+    # --- classify_sections: markers, extents, and Go's own `=== RUN` --------------------
+    gorows = classify_sections("=== RUN   chainsaw\n=== PAUSE chainsaw\n"
+                               "=== CONT  chainsaw/node-loss\n"
+                               "        === COMMAND\n        echo NODE_LOSS_SKIPPED_OK\n"
+                               "    l.go:52: | 1:00:00 | node-loss | s | SCRIPT | DONE |\n"
+                               "--- PASS: chainsaw/node-loss (131.09s)\n")
+    secs = [sec for sec, _ in gorows]
+    check("Go's column-0 `=== RUN/PAUSE/CONT` never open a section",
+          secs[:3] == ["", "", ""])
+    check("a section covers its indented body and ends at a less-indented line",
+          secs[3] == "" and secs[4] == "COMMAND" and secs[5] == "" and secs[6] == "")
+    check("a log with no === markers stays wholly scannable (UNSECTIONED)",
+          {sec for sec, _ in classify_sections("plain line\n  another\n")} == {UNSECTIONED})
+
+    # --- the preserved run itself, as a fixture ----------------------------------------
+    # runs/20260901T235117Z-e9a4b66 IS the bug: NODE_LOSS_SKIPPED_OK twice in `=== COMMAND`
+    # (source), never in output; NODE_LOSS_VOLUME_AVAILABLE_OK once in `=== STDOUT`.
+    fixture = CONF_ROOT / "runs" / "20260901T235117Z-e9a4b66"
+    if (fixture / "run.log").is_file() and (fixture / "report.junit.xml").is_file():
+        rows = build_rows(fixture, CONF_ROOT / "tests", "dev", "v0.2.12", "v1.36.4", "sha")
+        row = next((r for r in rows if r["test"] == "node-loss"), None)
+        check("preserved real L3 run records node-loss/R-STATE-02 as proven",
+              row is not None and row["proof"] == "proven"
+              and row["sentinel"] == "NODE_LOSS_VOLUME_AVAILABLE_OK"
+              and row["requirements"] == ["R-STATE-02"])
+        check("preserved real L3 run attributes (no DEGRADED fallback needed)",
+              row is not None and "DEGRADED" not in row["note"])
+        pairs = classify_sections((fixture / "run.log").read_text(errors="replace"))
+        secs = {sec for sec, line in pairs if "NODE_LOSS_SKIPPED_OK" in line}
+        check("every NODE_LOSS_SKIPPED_OK in the preserved log is COMMAND source",
+              secs == {"COMMAND"})
+        secs = {sec for sec, line in pairs
+                if line.strip() == "NODE_LOSS_VOLUME_AVAILABLE_OK"}
+        check("the real emission in the preserved log is in STDOUT", secs == {"STDOUT"})
+
+    # --- log attribution --------------------------------------------------------------
+    log = ("[run.sh] Coverage report first\n"
+           "    | 20:41:32 | node-loss | step | SCRIPT | RUN |\n"
+           "        NODE_LOSS_SKIPPED_OK\n"
+           "    | 20:44:01 | dr-restore | step | SCRIPT | RUN |\n"
+           "        DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK\n")
+    b, attributed = attribute_log(log, {"node-loss", "dr-restore"})
+    check("log lines are attributed to the testcase whose header preceded them",
+          attributed
+          and any("NODE_LOSS_SKIPPED_OK" in l for _, l in b["node-loss"])
+          and not any("NODE_LOSS_SKIPPED_OK" in l for _, l in b["dr-restore"]))
+    check("a pass token does NOT leak across testcase boundaries",
+          not any("DR_RESTORED" in l for _, l in b["node-loss"]))
+    check("an unsectioned log keeps whole-log scanning (nothing narrowed away)",
+          all(sec == UNSECTIONED for sec, _ in b["node-loss"]))
+
+    # Chainsaw's real headers carry a Go `t.Log` source prefix and ANSI colour; the earlier
+    # regex matched neither, so every genuine Chainsaw log silently fell into DEGRADED mode.
+    real_hdr = ("    l.go:52: \x08\x08\x08| 23:51:18 | \x1b[32;1mnode-loss\x1b[0;22m | "
+                "\x1b[32;1mstep\x1b[0;22m | SCRIPT | LOG |\n"
+                "        === STDOUT\n        NODE_LOSS_VOLUME_AVAILABLE_OK\n")
+    b2, attributed_real = attribute_log(real_hdr, {"node-loss"})
+    check("a REAL Chainsaw header (go source prefix + ANSI) attributes, not degrades",
+          attributed_real and "node-loss" in b2
+          and ("STDOUT", "        NODE_LOSS_VOLUME_AVAILABLE_OK") in b2["node-loss"])
+    _, attributed2 = attribute_log("no chainsaw headers at all\n", {"node-loss"})
+    check("an unattributable log is reported as such (degraded mode)", not attributed2)
+
+    smap2 = {"a": {"pass": ["DNS_OK", "A_ONLY_OK"], "skip": []},
+             "b": {"pass": ["DNS_OK"], "skip": []}}
+    check("only tokens owned by exactly one test may be used in degraded mode",
+          unique_tokens(smap2) == {"A_ONLY_OK"})
+
+    # --- end-to-end: a self-skipped L3 run must land in the ledger as `skipped` --------
+    with tempfile.TemporaryDirectory() as td:
+        root = Path(td)
+        tdir = root / "tests" / "l3-fault-injection" / "node-loss"
+        tdir.mkdir(parents=True)
+        (tdir / "chainsaw-test.yaml").write_text(
+            "kind: Test\nmetadata:\n  name: node-loss\n  labels:\n"
+            "    conformance.home.k3s/R-STATE-02: \"true\"\n  annotations:\n"
+            "    conformance.home.k3s/requirements: \"R-STATE-02\"\n"
+            "    conformance.home.k3s/layer: \"L3\"\nspec:\n  steps:\n"
+            "    - script:\n        content: 'echo hi'\n        check:\n"
+            "          (contains($stdout, 'NODE_LOSS_VOLUME_AVAILABLE_OK')"
+            " || contains($stdout, 'NODE_LOSS_SKIPPED_OK')): true\n")
+        rd = root / "runs" / "20260901T120000Z-abc1234"
+        rd.mkdir(parents=True)
+        (rd / "report.junit.xml").write_text(
+            '<testsuites><testsuite><testcase classname="L3:R-STATE-02" '
+            'name="node-loss"><properties>'
+            '<property name="requirements" value="R-STATE-02"/>'
+            '<property name="layer" value="L3"/></properties></testcase>'
+            "</testsuite></testsuites>")
+        (rd / "run.log").write_text(
+            "  | 12:00:01 | node-loss | s | SCRIPT | RUN |\n"
+            "      SKIP: 'longhorn' StorageClass absent\n"
+            "      NODE_LOSS_SKIPPED_OK\n")
+        rows = build_rows(rd, root / "tests", "dev", "v0.2.12", "v1.36.4", "abc1234")
+        check("end-to-end: Chainsaw 'passed' + skip token => proof 'skipped'",
+              len(rows) == 1 and rows[0]["junit_result"] == "passed"
+              and rows[0]["proof"] == "skipped"
+              and rows[0]["sentinel"] == "NODE_LOSS_SKIPPED_OK")
+        check("end-to-end: row carries ts from the run-dir name and the R-ID label",
+              rows[0]["ts_utc"] == "2026-09-01T12:00:00Z"
+              and rows[0]["requirements"] == ["R-STATE-02"])
+
+        (rd / "run.log").write_text(
+            "  | 12:00:01 | node-loss | s | SCRIPT | RUN |\n"
+            "      NODE_LOSS_VOLUME_AVAILABLE_OK\n")
+        rows = build_rows(rd, root / "tests", "dev", "v0.2.12", "v1.36.4", "abc1234")
+        check("end-to-end: Chainsaw 'passed' + pass token => proof 'proven'",
+              rows[0]["proof"] == "proven"
+              and rows[0]["sentinel"] == "NODE_LOSS_VOLUME_AVAILABLE_OK")
+
+        ledger = root / "ledger.jsonl"
+        append_rows(ledger, rows)
+        append_rows(ledger, rows)
+        check("ledger is append-only JSONL (one parsable object per line)",
+              len(ledger.read_text().strip().splitlines()) == 2
+              and json.loads(ledger.read_text().splitlines()[0])["test"] == "node-loss")
+
+    if not ok:
+        return 1
+    sys.stderr.write("record_run.py selftest: PASS\n")
+    return 0
+
+
+# ============================================================================== main
+def main() -> int:
+    ap = argparse.ArgumentParser(description=__doc__,
+                                 formatter_class=argparse.RawDescriptionHelpFormatter)
+    ap.add_argument("--run-dir", type=Path,
+                    help="conformance/runs/<UTC>-<sha>/ holding report.junit.xml + run.log")
+    ap.add_argument("--ledger", type=Path, default=DEFAULT_LEDGER,
+                    help=f"append-only ledger (default {DEFAULT_LEDGER})")
+    ap.add_argument("--tests", type=Path, default=CONF_ROOT / "tests")
+    ap.add_argument("--repo", type=Path, default=REPO_ROOT)
+    ap.add_argument("--env", default=os.environ.get("CONF_ENV", "dev"))
+    ap.add_argument("--chainsaw-version", default=None,
+                    help="override the versions.env pin (recorded verbatim)")
+    ap.add_argument("--kube-version", default=os.environ.get("CONF_KUBE_VERSION"),
+                    help="override the `kubectl version` probe (recorded verbatim)")
+    ap.add_argument("--dry-run", action="store_true",
+                    help="print the rows that WOULD be appended; write nothing")
+    ap.add_argument("--selftest", action="store_true", help="run the built-in self-test")
+    args = ap.parse_args()
+
+    if args.selftest:
+        return _selftest()
+    if args.run_dir is None:
+        sys.stderr.write("[record] --run-dir is required (or use --selftest)\n")
+        return 1
+
+    run_dir = args.run_dir.resolve()
+    junit, log = run_dir / "report.junit.xml", run_dir / "run.log"
+    # BOTH files or nothing. The JUnit alone cannot tell a self-skip from a real pass, so
+    # recording from it alone is exactly the false proof this tool exists to prevent.
+    missing = [p.name for p in (junit, log) if not p.is_file()]
+    if missing:
+        sys.stderr.write(
+            f"[record] {run_dir} is missing {', '.join(missing)} — nothing recorded. "
+            f"The JUnit alone cannot distinguish a self-skip from a real pass "
+            f"(see module docstring). SKIPPED (not green).\n")
+        return 3
+
+    try:
+        rows = build_rows(
+            run_dir, args.tests, args.env,
+            args.chainsaw_version or pinned_chainsaw_version(CONF_ROOT),
+            args.kube_version or server_kube_version(),
+            git_sha(args.repo))
+    except ET.ParseError as e:
+        sys.stderr.write(f"[record] {junit} is not parsable JUnit: {e}\n")
+        return 1
+    except OSError as e:
+        sys.stderr.write(f"[record] cannot read the run inputs: {e}\n")
+        return 1
+
+    if not rows:
+        sys.stderr.write(f"[record] {junit} contains no <testcase> — nothing to record. "
+                         f"SKIPPED (not green).\n")
+        return 3
+
+    for r in rows:
+        print(f"[record] {r['layer']:4s} {r['proof']:28s} {r['test']} "
+              f"({','.join(r['requirements']) or 'untagged'}) "
+              f"junit={r['junit_result']} sentinel={r['sentinel'] or '—'}")
+    counts: dict[str, int] = {}
+    for r in rows:
+        counts[r["proof"]] = counts.get(r["proof"], 0) + 1
+    print(f"[record] {len(rows)} testcase(s): "
+          + ", ".join(f"{k}={v}" for k, v in sorted(counts.items())))
+
+    if args.dry_run:
+        print("[record] --dry-run: ledger NOT written.")
+        return 0
+    try:
+        append_rows(args.ledger, rows)
+    except OSError as e:
+        sys.stderr.write(f"[record] cannot append to {args.ledger}: {e}\n")
+        return 1
+    print(f"[record] appended {len(rows)} row(s) -> {args.ledger}")
+    print("[record] COMMIT the run dir and the ledger; an uncommitted ledger proves nothing.")
+    return 0
+
+
+if __name__ == "__main__":
+    raise SystemExit(main())
@@ -15,26 +15,42 @@ This generator derives, from the REPOSITORY ALONE, three orthogonal axes per req
                       from a Flux Kustomization entrypoint (i.e. actually reconciled)?
  2. VERIFICATION    — is there a requirement-tagged test, at which layer, and is it an
                       EXECUTABLE test or a TODO scaffold?
-  3. PROOF           — has that test actually passed?  *** DELIBERATELY NOT DERIVED. ***
+  3. PROOF           — has that test actually passed?  Derived ONLY from the committed
+                       run ledger, and ONLY as far as that ledger's evidence reaches.

-WHAT THIS TOOL REFUSES TO DERIVE (and why)
------------------------------------------
-PROOF-OF-PASS IS NOT DERIVABLE FROM REPO STATE. Nothing tracked in git records a test
-result: `conformance/_artifacts/` and `results/` are git-ignored, and the only prose
-record of a green run lives in DECISIONS-LOG.md — hand-maintained, unstructured, and
-exactly the kind of source the operator has ruled out. The project's own culture is that
-"merged" is never "done" (agents/definition-of-done.md, R-TEST-03), so this report will
-NOT infer, guess, or default a requirement to green. Every requirement's proof state is
-reported as `not-derivable`, and the headline says so. If an untracked JUnit artifact
-happens to be lying in the workspace it is surfaced ONLY as a quarantined advisory with
-its mtime — never counted, never mixed into a status.
+PROOF — WHAT CHANGED, AND WHAT DID NOT
+--------------------------------------
+This report used to say `not-derivable` for every requirement, because nothing tracked in
+git recorded a test result and the only prose record of a green run lived in
+DECISIONS-LOG.md — hand-maintained, unstructured, exactly the source the operator ruled
+out. The fix this docstring asked for now exists: `conformance/runs/ledger.jsonl`, an
+append-only ledger written by `lib/record_run.py` from a run's JUnit **and its run log**
+(see conformance/.gitignore for the negations that keep both in git).

-The honest fix is a committed, machine-readable run ledger; until that exists, the most
-this report can say is "wired and testable", never "proven".
+THE REFUSAL POSTURE IS UNCHANGED. Evidence replaced "not derivable" only where evidence
+exists; nowhere is optimism substituted for it:
+
+  * A ledger row reaches `proven` only if `record_run.py` saw that test's own PASS
+    sentinel token in the run log. The L2/L3 tests SELF-SKIP GREEN — Chainsaw records
+    `passed` on `DR_RESTORE_SKIPPED_OK` exactly as on a real run, and its JUnit carries no
+    stdout — so a skip token maps to `skipped` and can never become proof.
+  * A proof is honoured only while it still describes the current code: if any of the
+    requirement's implementing manifests or verifying tests changed in a commit that is
+    NOT an ancestor of the run's `git_sha`, the row degrades to `stale-proof`, which is
+    not green. A run recorded from a dirty tree (`<sha>-dirty`) is never honoured.
+  * A requirement with no ledger row, or whose verifying tests did not ALL report proven,
+    stays `not-derivable` / `unknown` — never rounded up.
+  * The untracked `_artifacts/report.junit.xml` is STILL only a quarantined advisory with
+    its mtime. It is not the ledger, it is not evidence, and it feeds no status.
+
+With an empty or absent ledger this report behaves exactly as it did before: every
+requirement `not-derivable`, headline PROVEN 0, "the most this report can say is wired and
+testable, never proven".

 READS (all read-only)
  requirements/registry.yaml     the authoritative R-* mirror  (via lib/coverage.py)
  tests/**/chainsaw-test.yaml    requirement tags + layer + executable annotation
+  runs/ledger.jsonl              COMMITTED proof-of-pass rows (via lib/record_run.py)
  clusters/<env>/               Flux entrypoint -> the reconciliation graph
  `git ls-files`                 TRACKED files only; untracked scratch is not repo state
  ../home-network-k3s/docs/00-vision-and-scope.md   OPTIONAL registry<->spec parity check
@@ -92,7 +108,14 @@ FLUX_API = "kustomize.toolkit.fluxcd.io"
 #   conformance/tests — those are the TESTS; they are the VERIFICATION axis, counted there.
 #   ci/tests          — gate unit-test fixtures embed example R-IDs as DATA.
 #   registry.yaml     — the requirement mirror itself, not an implementation of anything.
-IMPL_EXCLUDE_PREFIXES = ("conformance/tests/", "ci/tests/")
+# `conformance/runs/` is excluded for a subtler reason than the test dirs: the ledger and the
+# preserved run logs CONTAIN the requirement IDs they are evidence FOR. Counting them as
+# implementing evidence makes `last_change` move every time proof is recorded, so a row's
+# git_sha always predates it and EVERY proof degrades to stale-proof the instant it is
+# committed — recording the proof destroys it. The ledger is the proof record; it must not
+# participate in the freshness computation about itself. (Found live 2026-09-01 on the first
+# PROVEN row.)
+IMPL_EXCLUDE_PREFIXES = ("conformance/tests/", "ci/tests/", "conformance/runs/")
 IMPL_EXCLUDE_PATHS = ("conformance/requirements/registry.yaml",)


@@ -343,6 +366,169 @@ def spec_requirement_ids(spec_root: Path) -> set[str] | None:
    return set(RID_RE.findall(doc.read_text()))


+# ========================================================================== ledger
+# PROOF axis. Everything here reads `conformance/runs/ledger.jsonl` (written ONLY by an
+# explicit `lib/record_run.py` / `run.sh --record` invocation) and downgrades relentlessly.
+# Nothing in this section may ever turn absent, ambiguous or aged evidence into green.
+
+DEFAULT_LEDGER = CONF_ROOT / "runs" / "ledger.jsonl"
+
+# Severity ranking, WORST FIRST. A requirement's proof is the MINIMUM over its verifying
+# tests, so one failed/skipped/missing test drags the whole requirement down and a single
+# proven test can never carry the others. `stale-proof` ranks below `proven` on purpose:
+# it is a real past pass that no longer describes the current code, and it is NOT green.
+PROOF_ORDER = {
+    "failed": 0,              # a ledger row recorded a JUnit failure/error
+    "unknown": 1,             # ran, but the log could not evidence pass vs self-skip
+    "not-derivable": 2,       # no ledger row for this test at all (the pre-ledger default)
+    "junit-skipped": 3,       # JUnit <skipped/> — did not execute
+    "skipped": 4,             # SELF-SKIPPED green: exited 0 without exercising the behaviour
+    "stale-proof": 5,         # proven at a sha the implementation/test has since moved past
+    "proven": 6,              # the ONLY green state
+}
+# record_run.py's two "we cannot tell" states collapse to one reported state here; the
+# per-test detail in status.json keeps the distinction for whoever has to fix it.
+_PROOF_ALIASES = {
+    "unknown-no-sentinel-declared": "unknown",
+    "unknown-sentinel-absent": "unknown",
+}
+
+
+def read_ledger(path: Path) -> list[dict]:
+    """Parse the append-only JSONL ledger. A malformed line is SKIPPED, never guessed at.
+
+    Absent or empty file -> [] , which reproduces this report's pre-ledger behaviour
+    exactly (every requirement `not-derivable`, headline PROVEN 0).
+    """
+    if not path.is_file():
+        return []
+    rows: list[dict] = []
+    for line in path.read_text(errors="replace").splitlines():
+        line = line.strip()
+        if not line or line.startswith("#"):
+            continue
+        try:
+            obj = json.loads(line)
+        except json.JSONDecodeError:
+            continue
+        if isinstance(obj, dict) and obj.get("test"):
+            rows.append(obj)
+    return rows
+
+
+def latest_by_test(rows: list[dict]) -> dict[str, dict]:
+    """Most recent ledger row per test name (ts_utc, then file order as the tiebreak).
+
+    Latest wins rather than best-ever: a test that has since gone back to self-skipping
+    must stop reading as proven.
+    """
+    latest: dict[str, dict] = {}
+    for i, r in enumerate(rows):
+        key = r["test"]
+        prev = latest.get(key)
+        if prev is None or (r.get("ts_utc", ""), i) >= (prev.get("ts_utc", ""),
+                                                       prev["_i"]):
+            latest[key] = {**r, "_i": i}
+    return latest
+
+
+class _GitOracle:
+    """Small cached wrapper for the two git questions the staleness rule asks."""
+
+    def __init__(self, repo: Path):
+        self.repo = repo
+        self._last: dict[tuple[str, ...], str | None] = {}
+        self._anc: dict[tuple[str, str], bool] = {}
+
+    def _git(self, *args: str) -> subprocess.CompletedProcess:
+        return subprocess.run(["git", "-C", str(self.repo), *args],
+                              capture_output=True, text=True)
+
+    def last_change(self, paths: tuple[str, ...]) -> str | None:
+        """Commit that last touched any of `paths`; None if git knows none of them."""
+        if not paths:
+            return None
+        if paths in self._last:
+            return self._last[paths]
+        p = self._git("log", "-1", "--format=%H", "--", *paths)
+        sha = p.stdout.strip() if p.returncode == 0 else ""
+        self._last[paths] = sha or None
+        return self._last[paths]
+
+    def is_ancestor(self, older: str, newer: str) -> bool:
+        """True iff `older` is an ancestor of (or equal to) `newer`.
+
+        False whenever either rev is unresolvable — an unknown or `-dirty` sha (a run
+        recorded from a modified working tree) can never satisfy the freshness test, which
+        is the intended fail-closed direction.
+        """
+        key = (older, newer)
+        if key in self._anc:
+            return self._anc[key]
+        ok = self._git("merge-base", "--is-ancestor", older, newer).returncode == 0
+        self._anc[key] = ok
+        return ok
+
+
+def derive_proof(git: _GitOracle, rid: str, verifiers: list[dict],
+                 impl_files: list[dict], latest: dict[str, dict]) -> dict:
+    """PROOF for one requirement, from the ledger, with the staleness rule applied.
+
+    STALENESS RULE — a proof is a claim about a specific tree, not a permanent badge:
+      relevant paths = every implementing artifact this report found for the requirement
+                       + every verifying test's directory
+      last_change    = `git log -1 -- <relevant paths>`
+      A row's `proven` is honoured only if `last_change` is an ANCESTOR of the row's
+      `git_sha`, i.e. the run happened at or after the newest change to the code it
+      claims to prove. Otherwise it degrades to `stale-proof` (not green). A `-dirty`
+      sha, a sha this clone does not have (rebased/dropped), or a path git has never
+      seen (an uncommitted test) all fail the ancestry test and degrade the same way.
+
+    The requirement's state is the MINIMUM over its verifying tests: every verifying test
+    must be proven and fresh before the requirement reads `proven`. A test with no ledger
+    row contributes `not-derivable`, so a partially-recorded run cannot manufacture green.
+    """
+    paths = sorted({f["path"] for f in impl_files}
+                   | {os.path.dirname(v["path"]) for v in verifiers if v.get("path")})
+    last_change = git.last_change(tuple(paths))
+
+    per_test: list[dict] = []
+    for v in verifiers:
+        row = latest.get(v["name"])
+        if row is None:
+            per_test.append({"test": v["name"], "state": "not-derivable",
+                             "reason": "no ledger row — this test has never been "
+                                       "recorded by run.sh --record / record_run.py"})
+            continue
+        base = _PROOF_ALIASES.get(row.get("proof", ""), row.get("proof", "unknown"))
+        if base not in PROOF_ORDER:
+            base = "unknown"
+        state, reason = base, row.get("note", "")
+        if base == "proven":
+            sha = row.get("git_sha", "")
+            if last_change and not git.is_ancestor(last_change, sha):
+                state = "stale-proof"
+                reason = (f"proven at {sha[:12]}, but the implementing manifests / test "
+                          f"changed in {last_change[:12]}, which that run predates")
+        per_test.append({"test": v["name"], "state": state, "reason": reason,
+                         "run_id": row.get("run_id"), "ts_utc": row.get("ts_utc"),
+                         "git_sha": row.get("git_sha"), "env": row.get("env"),
+                         "sentinel": row.get("sentinel"),
+                         "junit_result": row.get("junit_result")})
+
+    if not per_test:
+        state = "not-derivable"
+        reason = "no requirement-tagged test exists to be proven"
+    else:
+        worst = min(per_test, key=lambda d: PROOF_ORDER[d["state"]])
+        state, reason = worst["state"], worst["reason"]
+        if state == "not-derivable" and not reason:
+            reason = "no committed ledger row for this requirement's verifying test(s)"
+
+    return {"state": state, "reason": reason, "last_change_sha": last_change,
+            "evidence_paths": paths, "per_test": per_test}
+
+
 # ========================================================================== build
 IMPL_ORDER = {"none": 0, "off-cluster": 1, "unwired": 2, "reconciled-partial": 3,
              "reconciled": 4}
@@ -369,7 +555,13 @@ LABELS = {

 def build(repo: Path, registry: list[dict], tests: list[dict], impl: dict[str, list[dict]],
          applied: set[str], gitops_roots: set[str], spec_ids: set[str] | None,
-          env: str) -> dict:
+          env: str, ledger_rows: list[dict] | None = None) -> dict:
+    # PROOF axis inputs. `ledger_rows=None` / `[]` reproduces the pre-ledger behaviour:
+    # `latest` is empty, so every requirement derives `not-derivable` exactly as before.
+    ledger_rows = ledger_rows or []
+    latest = latest_by_test(ledger_rows)
+    git = _GitOracle(repo)
+
    classified = [classify_test(t) for t in tests]
    by_req_tests: dict[str, list[dict]] = {r["id"]: [] for r in registry}
    for t, c in zip(tests, classified):
@@ -439,11 +631,9 @@ def build(repo: Path, registry: list[dict], tests: list[dict], impl: dict[str, l
                "blocked_by": sorted({t["blocked_by"] for t in ts if t["blocked_by"]}),
                "tests": ts,
            },
-            # NEVER derived. See the module docstring.
-            "proof": {"state": "not-derivable",
-                      "reason": "no committed, machine-readable record of a test run "
-                                "exists in the repo (_artifacts/ and results/ are "
-                                "git-ignored); DECISIONS-LOG.md prose is not a signal"},
+            # Derived ONLY from the committed ledger, and only as far as it reaches.
+            # With no ledger row this stays `not-derivable`, as it always was.
+            "proof": derive_proof(git, rid, ts, ev, latest),
            "status": LABELS[(impl_state, verify_state)],
        }

@@ -492,8 +682,19 @@ def build(repo: Path, registry: list[dict], tests: list[dict], impl: dict[str, l
            and v["verification"]["state"] == "executable"),
        "safety_critical_total": count(lambda v: v["safety_critical"]),
        "safety_critical_without_executable_l3": len(safety_scaffold),
-        "proven": 0,
-        "proven_derivable": False,
+        # PROVEN is now a real count — but only of requirements whose EVERY verifying
+        # test has a committed ledger row that saw its pass sentinel, at a sha the
+        # implementation has not moved past. `stale-proof` and `skipped` are counted
+        # separately and are NOT green.
+        "proven": count(lambda v: v["proof"]["state"] == "proven"),
+        "proof_stale": count(lambda v: v["proof"]["state"] == "stale-proof"),
+        "proof_skipped": count(lambda v: v["proof"]["state"] == "skipped"),
+        "proof_failed": count(lambda v: v["proof"]["state"] == "failed"),
+        "proof_unknown": count(lambda v: v["proof"]["state"] == "unknown"),
+        "proof_not_derivable": count(
+            lambda v: v["proof"]["state"] in ("not-derivable", "junit-skipped")),
+        "ledger_rows": len(ledger_rows),
+        "proven_derivable": bool(ledger_rows),
        "coverage_style_covered": count(lambda v: v["verification"]["state"] != "none"),
    }
    summary["uncited_by_any_reconciled_manifest"] = count(
@@ -552,16 +753,39 @@ def render_md(rep: dict, nodes: list[dict], advisory: dict | None) -> str:
    o.append(f"| Safety-critical requirements whose L3 test is a scaffold | "
             f"**{s['safety_critical_without_executable_l3']}** of "
             f"{s['safety_critical_total']} |")
-    o.append(f"| **PROVEN (a test actually passed)** | **{s['proven']} — NOT DERIVABLE** |")
-    o.append("")
-    o.append("> **Proof is deliberately not derived.** Nothing tracked in git records a "
-             "test result: `conformance/_artifacts/` and `results/` are git-ignored, and "
-             "the only record of a green run is DECISIONS-LOG.md prose — hand-maintained, "
-             "which is the very thing this report replaces. Per "
-             "`agents/definition-of-done.md` a requirement is done only when its tagged "
-             "test **passes**, so the strongest claim this report can make is "
-             "*wired and testable*. Closing the gap needs a committed, machine-readable "
-             "run ledger; until then, treat every row below as unproven.\n")
+    if s["proven_derivable"]:
+        o.append(f"| **PROVEN (every verifying test passed, evidenced)** | "
+                 f"**{s['proven']}** |")
+        o.append(f"| Proof exists but is STALE (code changed after the run) | "
+                 f"{s['proof_stale']} |")
+        o.append(f"| Verifying test SELF-SKIPPED green (not proof) | {s['proof_skipped']} |")
+        o.append(f"| Verifying test FAILED in the recorded run | {s['proof_failed']} |")
+        o.append(f"| Ran, but the log could not evidence pass vs self-skip | "
+                 f"{s['proof_unknown']} |")
+        o.append(f"| No committed ledger row yet | {s['proof_not_derivable']} |")
+        o.append("")
+        o.append(f"> **Proof comes from `conformance/runs/ledger.jsonl`** "
+                 f"({s['ledger_rows']} row(s)), written only by an explicit "
+                 f"`run.sh --record` / `lib/record_run.py` invocation. A row reaches "
+                 f"`proven` ONLY when the run log carried that test's own pass sentinel "
+                 f"token — the L2/L3 tests self-skip GREEN (Chainsaw records `passed` on "
+                 f"`DR_RESTORE_SKIPPED_OK` exactly as on a real run, and its JUnit carries "
+                 f"no stdout), so a skip token maps to `skipped` and can never become "
+                 f"proof. A proof is honoured only while the implementing manifests and "
+                 f"the test itself have not changed since the recorded `git_sha`; "
+                 f"otherwise it degrades to `stale-proof`, which is not green.\n")
+    else:
+        o.append(f"| **PROVEN (a test actually passed)** | **{s['proven']} — NOT DERIVABLE** |")
+        o.append("")
+        o.append("> **No proof is derivable: `conformance/runs/ledger.jsonl` is absent or "
+                 "empty.** The ledger is the committed, machine-readable run record; until "
+                 "a run is captured with `run.sh --record`, nothing tracked in git records "
+                 "a test result (`conformance/_artifacts/` and `results/` are git-ignored, "
+                 "and DECISIONS-LOG.md prose is hand-maintained — the very thing this "
+                 "report replaces). Per `agents/definition-of-done.md` a requirement is "
+                 "done only when its tagged test **passes**, so the strongest claim this "
+                 "report can make is *wired and testable*; treat every row below as "
+                 "unproven.\n")
    o.append(f"> For contrast, `coverage.md` counts **{s['coverage_style_covered']}** "
             f"requirements as covered — that count includes the "
             f"{s['verify_scaffold_only']} whose only verifying test is a TODO scaffold.\n")
@@ -612,7 +836,15 @@ def render_md(rep: dict, nodes: list[dict], advisory: dict | None) -> str:
            if ver["blocked_by"]:
                vcell += f" · blocked-by: {'; '.join(ver['blocked_by'])}"
        sc = " ⚠safety" if v["safety_critical"] else ""
-        o.append(f"| {rid}{sc} | **{v['status']}** | {icell} | {vcell} | not-derivable |")
+        pr = v["proof"]
+        if pr["state"] == "not-derivable":
+            pcell = "not-derivable"
+        else:
+            runs = sorted({d["run_id"] for d in pr["per_test"] if d.get("run_id")})
+            pcell = f"**{pr['state']}**" if pr["state"] == "proven" else pr["state"]
+            if runs:
+                pcell += f" ({', '.join(runs)})"
+        o.append(f"| {rid}{sc} | **{v['status']}** | {icell} | {vcell} | {pcell} |")

    if rep["safety_critical_without_executable_l3"]:
        o.append("\n## Safety-critical requirements whose L3 fault test is a SCAFFOLD "
@@ -701,22 +933,76 @@ def render_md(rep: dict, nodes: list[dict], advisory: dict | None) -> str:
    o.append("| executable vs scaffold | TODO markers in the test body outrank the "
             "`executable` annotation; a real body without the annotation still counts "
             "and is flagged | conservative — ambiguity never upgrades |")
-    o.append("| **test actually passed** | **NOT DERIVED** — nothing in git records a "
-             "run result | refused |")
+    o.append("| **test actually passed** | the committed `runs/ledger.jsonl` row for "
+             "every verifying test: JUnit result **plus** that test's own pass sentinel "
+             "token grepped from the run log | exact where a run was recorded, refused "
+             "everywhere else — a self-skip token or a missing/unrecognised sentinel "
+             "NEVER yields `proven` |")
+    o.append("| proof still current | the row's `git_sha` must be a descendant of the "
+             "last commit touching the requirement's implementing manifests or its test "
+             "| conservative — an unresolvable or `-dirty` sha degrades to `stale-proof` |")
    o.append("| cluster liveness (pods/CRs healthy) | **NOT DERIVED** — no cluster is "
             "contacted; `reconciled` means Flux *would* apply it, not that it is "
             "healthy | refused |")
    o.append("| phase/board status | **NOT DERIVED** — `agents/task-board.md` is stale "
             "and is not a signal | refused |")

+    o.append("\n## Run ledger — the committed proof-of-pass evidence\n")
+    if not s["proven_derivable"]:
+        o.append("- `conformance/runs/ledger.jsonl` holds no rows. Capture a run with "
+                 "`./run.sh --record` (recording is never implicit: a run that silently "
+                 "records itself is how a bad run becomes a permanent false proof), then "
+                 "commit `conformance/runs/<run-id>/` **with its `run.log`** and the "
+                 "ledger. The log is the load-bearing half — Chainsaw's JUnit carries no "
+                 "stdout, so without it a self-skip is indistinguishable from a pass.")
+    else:
+        o.append(f"- {s['ledger_rows']} row(s) in `conformance/runs/ledger.jsonl`. "
+                 f"Per-test evidence for every non-`not-derivable` requirement below; "
+                 f"full rows (env, chainsaw/kube versions, sentinel, note) are in "
+                 f"`status.json` under `by_requirement.<R-ID>.proof.per_test`.\n")
+        o.append("| Requirement | Proof | Test | Ledger state | Sentinel | Run |")
+        o.append("|---|---|---|---|---|---|")
+        for rid, v in rep["by_requirement"].items():
+            pr = v["proof"]
+            if pr["state"] == "not-derivable":
+                continue
+            for d in pr["per_test"]:
+                o.append(f"| {rid} | {pr['state']} | `{d['test']}` | {d['state']} | "
+                         f"`{d.get('sentinel') or '—'}` | {d.get('run_id') or '—'} |")
+        stale = [(rid, v) for rid, v in rep["by_requirement"].items()
+                 if v["proof"]["state"] == "stale-proof"]
+        if stale:
+            o.append("\n### Stale proofs — a real pass that no longer describes this tree\n")
+            o.append("These requirements DID pass, but their implementing manifests or "
+                     "their verifying test changed in a commit the recorded run predates. "
+                     "A stale proof is not green; re-run with `--record`.\n")
+            for rid, v in stale:
+                pr = v["proof"]
+                o.append(f"- **{rid}** — {pr['reason']}")
+        skipped = [(rid, v) for rid, v in rep["by_requirement"].items()
+                   if v["proof"]["state"] == "skipped"]
+        if skipped:
+            o.append("\n### SELF-SKIPPED green — recorded, and deliberately NOT proof\n")
+            o.append("Chainsaw reported `passed` for these, because the test exited 0 "
+                     "after emitting its skip token: a precondition (Longhorn "
+                     "StorageClass, Velero CRDs, >=3 Ready nodes) was absent, so the "
+                     "behaviour was never exercised. This is exactly the row a "
+                     "JUnit-only ledger would have recorded as green.\n")
+            for rid, v in skipped:
+                toks = ", ".join(sorted({d.get("sentinel") or "?"
+                                         for d in v["proof"]["per_test"]
+                                         if d["state"] == "skipped"}))
+                o.append(f"- **{rid}** — skip token(s): `{toks}`")
+
    o.append("\n## Advisory — untracked local run artifact (NOT counted)\n")
    if advisory:
        o.append(f"- `{advisory['path']}` (untracked, git-ignored), last written "
                 f"{advisory['mtime']}: {advisory['tests']} testcase(s), "
                 f"{advisory['failures']} failure(s), {advisory['skipped']} skipped.")
        o.append(f"- requirement IDs it names: {', '.join(advisory['requirements']) or '—'}")
-        o.append("- This is one developer's local workspace, not repo state. It is shown "
-                 "for orientation only and contributes to NO status above.")
+        o.append("- This is one developer's local workspace, not repo state, and it is NOT "
+                 "the ledger. It is shown for orientation only and contributes to NO "
+                 "status above — a JUnit alone cannot tell a self-skip from a pass.")
    else:
        o.append("- none present.")
    return "\n".join(o) + "\n"
@@ -841,6 +1127,122 @@ def _selftest() -> int:
              classify_test({"name": "s", "path": str(f), "layer": "L2"})["state"]
              == "scaffold")

+    # ---------------------------------------------------------------- PROOF / ledger
+    # These are the assertions that stand between this report and a fake green.
+    check("empty ledger parses to no rows (pre-ledger behaviour is preserved)",
+          read_ledger(Path("/nonexistent/ledger.jsonl")) == [])
+
+    def row(**kw):
+        base = {"ts_utc": "2026-09-01T12:00:00Z", "git_sha": "deadbeef", "env": "dev",
+                "chainsaw_version": "v0.2.12", "kube_version": "v1.36.4", "layer": "L3",
+                "test": "dr-restore", "requirements": ["R-STATE-03"],
+                "junit_result": "passed", "sentinel": None, "proof": "skipped",
+                "run_id": "20260901T120000Z-deadbee", "note": ""}
+        base.update(kw)
+        return base
+
+    verifiers = [{"name": "dr-restore",
+                  "path": "conformance/tests/l3-fault-injection/dr-restore/"
+                          "chainsaw-test.yaml"}]
+
+    with tempfile.TemporaryDirectory() as td:
+        gr = Path(td)
+        env = {**os.environ, "GIT_AUTHOR_NAME": "t", "GIT_AUTHOR_EMAIL": "t@t",
+               "GIT_COMMITTER_NAME": "t", "GIT_COMMITTER_EMAIL": "t@t"}
+
+        def git(*a):
+            return subprocess.run(["git", "-C", str(gr), *a], capture_output=True,
+                                  text=True, env=env)
+
+        git("init", "-q", "-b", "main")
+        (gr / "platform").mkdir()
+        (gr / "platform" / "velero.yaml").write_text("kind: X  # R-STATE-03\n")
+        git("add", "-A"); git("commit", "-qm", "one")
+        sha_a = git("rev-parse", "HEAD").stdout.strip()
+        (gr / "platform" / "velero.yaml").write_text("kind: X  # R-STATE-03 v2\n")
+        git("add", "-A"); git("commit", "-qm", "two")
+        sha_b = git("rev-parse", "HEAD").stdout.strip()
+
+        oracle = _GitOracle(gr)
+        impl = [{"path": "platform/velero.yaml"}]
+
+        # *** THE CASE THIS WHOLE FEATURE EXISTS FOR ***
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="skipped", junit_result="passed",
+                                              sentinel="DR_RESTORE_SKIPPED_OK",
+                                              git_sha=sha_b)]))
+        check("a SELF-SKIP row on a GREEN JUnit is 'skipped', NEVER 'proven'",
+              pr["state"] == "skipped")
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="proven", git_sha=sha_b,
+                                              sentinel="DR_RESTORED_OK")]))
+        check("a proven row at the CURRENT sha is honoured", pr["state"] == "proven")
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="proven", git_sha=sha_a,
+                                              sentinel="DR_RESTORED_OK")]))
+        check("STALENESS: proven at a sha the implementation has moved past degrades "
+              "to stale-proof", pr["state"] == "stale-proof")
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="proven", git_sha=f"{sha_b}-dirty",
+                                              sentinel="DR_RESTORED_OK")]))
+        check("a run recorded from a DIRTY tree is never honoured as proof",
+              pr["state"] == "stale-proof")
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(proof="proven", git_sha="0" * 40)]))
+        check("a git_sha this clone cannot resolve degrades, never upgrades",
+              pr["state"] == "stale-proof")
+
+        for bad, expect in (("failed", "failed"),
+                            ("junit-skipped", "junit-skipped"),
+                            ("unknown-sentinel-absent", "unknown"),
+                            ("unknown-no-sentinel-declared", "unknown"),
+                            ("something-new-from-the-future", "unknown")):
+            pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                              latest_by_test([row(proof=bad, git_sha=sha_b)]))
+            check(f"ledger state {bad!r} maps to {expect!r}, never to proven",
+                  pr["state"] == expect)
+
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl, {})
+        check("no ledger row at all stays not-derivable",
+              pr["state"] == "not-derivable")
+
+        # Two verifying tests, only one proven: the requirement must NOT read proven.
+        two = verifiers + [{"name": "data-survival",
+                            "path": "conformance/tests/l3-fault-injection/"
+                                    "data-survival/chainsaw-test.yaml"}]
+        pr = derive_proof(oracle, "R-STATE-03", two, impl,
+                          latest_by_test([row(proof="proven", git_sha=sha_b)]))
+        check("a requirement is proven only when EVERY verifying test is",
+              pr["state"] == "not-derivable")
+        pr = derive_proof(oracle, "R-STATE-03", two, impl,
+                          latest_by_test([row(proof="proven", git_sha=sha_b),
+                                          row(test="data-survival", proof="skipped",
+                                              git_sha=sha_b)]))
+        check("worst-of wins across verifying tests (skip drags proven down)",
+              pr["state"] == "skipped")
+
+        # Latest row wins, not best-ever: a test that regressed to self-skipping must
+        # stop reading as proven.
+        pr = derive_proof(oracle, "R-STATE-03", verifiers, impl,
+                          latest_by_test([row(ts_utc="2026-09-01T10:00:00Z",
+                                              proof="proven", git_sha=sha_b),
+                                          row(ts_utc="2026-09-02T10:00:00Z",
+                                              proof="skipped", git_sha=sha_b)]))
+        check("the LATEST ledger row wins, not the best one ever recorded",
+              pr["state"] == "skipped")
+
+        # A malformed ledger line is skipped, never guessed at.
+        lf = gr / "ledger.jsonl"
+        lf.write_text('{"test":"a","proof":"proven"}\nnot json at all\n\n'
+                      '{"proof":"proven"}\n')
+        rows = read_ledger(lf)
+        check("malformed / test-less ledger lines are dropped, not guessed at",
+              len(rows) == 1 and rows[0]["test"] == "a")
+
    if not ok:
        return 1
    sys.stderr.write("status.py selftest: PASS\n")
@@ -865,6 +1267,10 @@ def main() -> int:
                    help="exit 1 on defects this tool owns: registry/spec drift, "
                         "executable-annotation conflicts, or a safety-critical "
                         "requirement whose only L3 test is a scaffold")
+    ap.add_argument("--ledger", type=Path, default=DEFAULT_LEDGER,
+                    help=f"committed proof-of-pass ledger written by lib/record_run.py "
+                         f"(default {DEFAULT_LEDGER}). Absent or empty => every "
+                         f"requirement stays `not-derivable`, as before the ledger existed")
    ap.add_argument("--selftest", action="store_true", help="run the built-in self-test")
    args = ap.parse_args()

@@ -895,7 +1301,12 @@ def main() -> int:
    applied, nodes = reconciled_files(repo, entry)
    gitops_roots = {n["resolved"].split("/", 1)[0] for n in nodes if n["exists"]}
    impl = scan_implementation(repo, tracked_files(repo))
-    rep = build(repo, registry, tests, impl, applied, gitops_roots, spec_ids, args.env)
+    ledger_rows = read_ledger(args.ledger)
+    rep = build(repo, registry, tests, impl, applied, gitops_roots, spec_ids, args.env,
+                ledger_rows)
+    rep["ledger"] = {"path": os.path.relpath(args.ledger, REPO_ROOT),
+                     "rows": len(ledger_rows),
+                     "present": args.ledger.is_file()}
    rep["flux_graph"] = nodes
    rep["gitops_roots"] = sorted(gitops_roots)
    rep["reconciled_file_count"] = len(applied)
@@ -915,7 +1326,11 @@ def main() -> int:
          f"(+{s['wired_or_partial_and_testable'] - s['wired_and_testable']} partial) | "
          f"scaffold-only {s['verify_scaffold_only']} | "
          f"safety-critical w/o executable L3 "
-          f"{s['safety_critical_without_executable_l3']} | PROVEN: not derivable")
+          f"{s['safety_critical_without_executable_l3']} | "
+          + (f"PROVEN: {s['proven']} (stale {s['proof_stale']}, self-skipped "
+             f"{s['proof_skipped']}, failed {s['proof_failed']}, unknown "
+             f"{s['proof_unknown']}) from {s['ledger_rows']} ledger row(s)"
+             if s["proven_derivable"] else "PROVEN: not derivable (empty run ledger)"))
    print(f"[status] wrote {args.out/'status.md'} and {args.out/'status.json'}")

    rc = 0
@@ -14,12 +14,33 @@
 #   ./run.sh --status                 # DERIVED STATUS report only (no cluster): per
 #                                     #   requirement, is it implemented, is it actually
 #                                     #   reconciled by Flux, is its test executable or a
-#                                     #   scaffold. Proof-of-pass is deliberately NOT
-#                                     #   derived — see lib/status.py.
+#                                     #   scaffold, and whether the committed run ledger
+#                                     #   (runs/ledger.jsonl) actually proves it — see
+#                                     #   lib/status.py. No ledger row => not-derivable.
 #   ./run.sh --lint                   # structural-validate test defs (no cluster)
 #   ./run.sh --strict-coverage        # hygiene gate: fail on tag/annotation drift
 #   ./run.sh --requirements R-NET-01  # ALSO asserts those IDs are covered (merge gate)
 #   ./run.sh --require-all            # phase-exit: every requirement must be covered
+#   ./run.sh --record                 # RUN AND CAPTURE: tee the whole run to
+#                                     #   runs/<UTC>-<short-sha>/run.log, copy the JUnit
+#                                     #   beside it, and append one ledger row per
+#                                     #   testcase to runs/ledger.jsonl (lib/record_run.py)
+#
+# --record — PROOF-OF-PASS, CAPTURED AT RUN TIME (why it is a separate flag)
+# --------------------------------------------------------------------------
+# Without it, nothing about a green run ever reaches repo state: _artifacts/ is gitignored
+# and the root .gitignore kills *.junit.xml globally, which is why `--status` reports
+# PROVEN 0 for all 51 requirements. `--record` writes the one tracked thing that fixes
+# that — `conformance/runs/` (see conformance/.gitignore for the negations).
+#
+# RECORDING IS DELIBERATELY EXPLICIT. A run that silently records itself is how a bad run
+# becomes a permanent false proof, so the plain `./run.sh` writes no ledger row at all.
+#
+# BOTH FILES ARE KEPT, and the LOG is the load-bearing one. The L2/L3 tests self-skip
+# GREEN: when a precondition is missing they echo e.g. `DR_RESTORE_SKIPPED_OK` and exit 0,
+# and Chainsaw records `passed` exactly as on a real run. Chainsaw's JUnit carries no
+# stdout, so the sentinel token in run.log is the ONLY thing that separates proven from
+# skipped. A JUnit committed on its own would record a skip as proof of R-STATE-03.
 #
 # Artifacts (always written under conformance/_artifacts/, gitignored):
 #   _artifacts/report.junit.xml        JUnit (Chainsaw output, or skipped-scaffold shim)
@@ -28,6 +49,11 @@
 #   _artifacts/status/status.md        human requirement-status report (--status)
 #   _artifacts/status/status.json      machine requirement-status report (--status)
 #
+# Run ledger (TRACKED — commit these; --record only):
+#   runs/<UTC>-<short-sha>/run.log            full tee'd run output (carries the sentinels)
+#   runs/<UTC>-<short-sha>/report.junit.xml   the JUnit for that same run
+#   runs/ledger.jsonl                         append-only, one row per testcase per run
+#
 # Phase 0: no cluster exists. The behavior tests are valid scaffolds that cannot
 # execute yet, so run.sh emits a *skipped* JUnit and a coverage report, and exits
 # green — the harness is proven reproducible while later phases fill in behavior.
@@ -47,27 +73,30 @@ STATUS_OUT="${ARTIFACTS}/status"
 JUNIT_OUT="${ARTIFACTS}/report.junit.xml"
 PYTHON="${PYTHON:-python3}"

+# Every argument as given, so `--record` can re-exec this script unchanged (minus itself)
+# under `tee`. Captured BEFORE parsing so nothing is normalized away.
+ORIG_ARGS=("$@")
+
 LAYER="all"
 REQS=""
 MODE="run"          # run | coverage-only | status | lint
 STRICT_COVERAGE=0
 REQUIRE_ALL=0
 FORCE_NO_CLUSTER=0
+RECORD=0

 # Documented, out-of-scope coverage gaps exempt from the completeness gate: requirements
 # owned by another workstream that WS-TEST does not yet scaffold. Listed here so the
 # exemption is explicit and reviewable, not silent.
-#   R-ENV-02   (dev->prod promote) — owned by WS-INFRA/WS-GITOPS; unscaffolded (a GAP in
-#                                    coverage.md). The coarse path->requirement map keys
-#                                    clusters/* AND ci/* to it and the R-ENV-02 doc token
-#                                    appears in platform/kustomization.yaml's header, so ANY
-#                                    infra/overlay/CI edit (e.g. enabling a component, bumping
-#                                    SPEC_PIN) would otherwise false-block on it.
-#   R-GITOPS-01 (state in git/Flux) — same: owned by WS-GITOPS, unscaffolded, and the ci/*
-#                                    path-map keys to it, so editing any ci/ file (SPEC_PIN
-#                                    adoption included) would false-block.
-# These are visible GAPs, not hidden — removing them from this list is the right move the
-# moment WS-TEST adds their verifying tests.
+#
+# EMPTY as of 2026-09-01. R-ENV-02 and R-GITOPS-01 were the last two entries — exempted
+# because they were unscaffolded while the coarse path->requirement map keys clusters/*
+# and ci/* to them, so any overlay/CI edit would have false-blocked. They now have a real
+# verifying L0 test (tests/l0-static/flux-postbuild-substitution), which asserts the
+# substitution mechanism that IS the "authored once, promoted" contract, so they are
+# covered rather than exempt and the completeness gate can hold them to it. That test
+# names its own limits in its header: it proves the STATIC property (no manifest renders
+# an undefined variable), not the live-cluster half of either requirement.
 #
 # FOLLOW-UP (WS-TEST) — HALF DONE. The debt was "make the matcher stop keying on doc-header
 # tokens so real requirements need not be exempted". The CONTENT-SCAN half is now fixed in
@@ -83,9 +112,11 @@ FORCE_NO_CLUSTER=0
 # R-STATE-02 (node-loss) WAS listed here (owned by WS-STORAGE, "delivered with Longhorn/infra")
 # but now has a real verifying L3 test — tests/l3-fault-injection/node-loss — so it is no
 # longer a gap and has been removed from this list; the coverage report counts it as covered.
-DOCUMENTED_GAPS="R-ENV-02 R-GITOPS-01"
+DOCUMENTED_GAPS=""

-usage() { sed -n '2,40p' "${BASH_SOURCE[0]}" | sed 's/^# \{0,1\}//'; }
+# Print the header block (line 2 through the closing `####` rule, which is dropped) as
+# help. Bounded by the rule rather than a fixed line number so the header can grow.
+usage() { sed -n '2,/^#####/p' "${BASH_SOURCE[0]}" | sed '$d' | sed 's/^# \{0,1\}//'; }

 while [ $# -gt 0 ]; do
  case "$1" in
@@ -97,6 +128,7 @@ while [ $# -gt 0 ]; do
    --strict-coverage) STRICT_COVERAGE=1; shift ;;
    --require-all)    REQUIRE_ALL=1; shift ;;
    --no-cluster)     FORCE_NO_CLUSTER=1; shift ;;
+    --record)         RECORD=1; shift ;;
    -h|--help)        usage; exit 0 ;;
    *) echo "unknown arg: $1" >&2; usage; exit 2 ;;
  esac
@@ -106,9 +138,69 @@ mkdir -p "${ARTIFACTS}" "${COVERAGE_OUT}" "${STATUS_OUT}"

 log() { printf '\033[1m[run.sh]\033[0m %s\n' "$*"; }

+###############################################################################
+# --record: capture this run as committed evidence, then hand it to the ledger.
+#
+# Implemented as a ONE-LEVEL re-exec of this same script under `tee`, so the run itself is
+# byte-for-byte the ordinary run (same code path, same artifacts) and the log is the exact
+# operator-visible output — no second, differently-behaving "recording mode" to drift.
+# CONF_RECORD_CHILD guards against recursion.
+#
+# The recorder runs REGARDLESS of the run's exit status: a red run must be recorded as red
+# (that is evidence too), and run.sh still exits with the child's real rc, so no gate is
+# softened by recording. `${PIPESTATUS[0]}` is what carries that rc past `tee`.
+###############################################################################
+if [ "${RECORD}" = 1 ] && [ -z "${CONF_RECORD_CHILD:-}" ]; then
+  case "${MODE}" in
+    run) ;;
+    # --record is about EVIDENCE OF A RUN. --coverage-only/--status/--lint execute no
+    # test, so a ledger row from one of them would be a row about nothing.
+    *) echo "--record captures a TEST RUN; --${MODE} executes none." >&2; exit 2 ;;
+  esac
+  RUN_SHA="$(git -C "${CONF_ROOT}" rev-parse --short HEAD 2>/dev/null || echo nogit)"
+  RUN_ID="$(date -u +%Y%m%dT%H%M%SZ)-${RUN_SHA}"
+  RUN_DIR="${CONF_ROOT}/runs/${RUN_ID}"
+  mkdir -p "${RUN_DIR}"
+  # Drop any JUnit left behind by a PREVIOUS run before starting, so this run dir can only
+  # ever capture a report THIS run produced. Copying a stale artifact would pair someone
+  # else's result with this run's log — a fabricated pairing, which is precisely the class
+  # of false proof the ledger exists to prevent.
+  rm -f "${JUNIT_OUT}"
+  # Strip --record from the argv handed to the child; everything else passes through.
+  CHILD_ARGS=()
+  for a in ${ORIG_ARGS[@]+"${ORIG_ARGS[@]}"}; do
+    [ "$a" = "--record" ] || CHILD_ARGS+=("$a")
+  done
+  log "RECORD: capturing this run to runs/${RUN_ID}/ (run.log + report.junit.xml)"
+  set +e
+  CONF_RECORD_CHILD=1 "${BASH_SOURCE[0]}" ${CHILD_ARGS[@]+"${CHILD_ARGS[@]}"} 2>&1 \
+    | tee "${RUN_DIR}/run.log"
+  RUN_RC=${PIPESTATUS[0]}
+  set -e
+  if [ -f "${JUNIT_OUT}" ]; then
+    cp "${JUNIT_OUT}" "${RUN_DIR}/report.junit.xml"
+  else
+    log "RECORD: no ${JUNIT_OUT} was produced — the ledger step will SKIP (never green)."
+  fi
+  # Explicit, separate step: read the JUnit + the log and append one row per testcase.
+  # rc 3 = inputs absent (nothing recorded, not green); it must not mask the run's own rc.
+  # CONF_LEDGER exists so the harness's own tests can exercise this path without writing
+  # to the real ledger; operators should never set it.
+  "${PYTHON}" "${CONF_ROOT}/lib/record_run.py" \
+    --run-dir "${RUN_DIR}" --env "${CONF_ENV:-dev}" \
+    --ledger "${CONF_LEDGER:-${CONF_ROOT}/runs/ledger.jsonl}" || true
+  log "RECORD: run rc=${RUN_RC}. Commit conformance/runs/${RUN_ID}/ WITH its run.log and"
+  log "RECORD: conformance/runs/ledger.jsonl — an uncommitted ledger proves nothing."
+  exit "${RUN_RC}"
+fi
+
 # --- Coverage report is always produced (cluster-independent, R-TEST-04) --------------
 gen_coverage() {
-  local flags=(--allow-gap "${DOCUMENTED_GAPS}")
+  # Pass --allow-gap only when there IS an exemption: an empty DOCUMENTED_GAPS means no
+  # requirement is exempt, and handing the flag an empty string would be a silent no-op
+  # that reads like an exemption in the CLI log.
+  local flags=()
+  [ -n "${DOCUMENTED_GAPS}" ] && flags+=(--allow-gap "${DOCUMENTED_GAPS}")
  [ "${STRICT_COVERAGE}" = 1 ] && flags+=(--strict)
  # A tagged subset run is also the merge gate: the touched requirements MUST be covered.
  [ -n "${REQS}" ] && flags+=(--require "${REQS}")
@@ -0,0 +1,4 @@
+<testsuites name="chainsaw-report" tests="1" failures="0" errors="0" time="0.000000"><testsuite name="/work/conformance/tests/l3-fault-injection/node-loss" tests="1" failures="0" errors="0" id="0" time="">
+    <testcase name="node-loss" classname="" time="131.090121" />
+  </testsuite>
+</testsuites>
@@ -0,0 +1,232 @@
+[1m[run.sh][0m Coverage report first (always)
+[coverage] 42/51 requirements have a scaffolded test (82.4%); 9 gap(s), 0 safety-critical gap(s).
+[coverage] wrote /work/conformance/_artifacts/coverage/coverage.md and /work/conformance/_artifacts/coverage/coverage.json
+[1m[run.sh][0m No L0/L1 offline checks match the selection (layer=l3 reqs='R-STATE-02').
+[1m[run.sh][0m LIGHT pass: no tests selected.
+[1m[run.sh][0m HEAVY pass: 1 test(s) SERIAL (parallel=1) — node-loss
+Version: 0.2.12
+Loading config (/work/conformance/config/chainsaw-config.yaml)...
+- Using test file: chainsaw-test
+- TestDirs [/work/conformance/tests/l3-fault-injection/node-loss]
+- SkipDelete false
+- FailFast false
+- ReportFormat 'JUNIT-TEST'
+- ReportName 'chainsaw-report-heavy'
+- ReportPath '/work/conformance/_artifacts'
+- Namespace ''
+- FullName false
+- IncludeTestRegex ''
+- ExcludeTestRegex ''
+- ApplyTimeout 1m30s
+- AssertTimeout 3m0s
+- CleanupTimeout 2m0s
+- DeleteTimeout 2m0s
+- ErrorTimeout 1m0s
+- ExecTimeout 3m0s
+- DeletionPropagationPolicy Background
+- Parallel 1
+- Template true
+- NoCluster false
+- PauseOnFailure false
+Loading tests...
+- node-loss (/work/conformance/tests/l3-fault-injection/node-loss)
+Loading values...
+Running tests...
+=== RUN   chainsaw
+=== PAUSE chainsaw
+=== CONT  chainsaw
+=== RUN   chainsaw/node-loss
+=== PAUSE chainsaw/node-loss
+=== CONT  chainsaw/node-loss
+    l.go:52: | 23:51:18 | [32;1mnode-loss[0;22m | [32;1m@chainsaw                              [0;22m | [32;1mCREATE[0;22m    | [32;1mOK[0;22m    | v1/Namespace @ chainsaw-fond-marlin
+    l.go:52: | 23:51:18 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mTRY[0;22m       | [36;1mBEGIN[0;22m |
+    l.go:52: | 23:51:18 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mCMD[0;22m       | [36;1mRUN[0;22m   |
+        === COMMAND
+        /usr/bin/sh -c set -euo pipefail
+        NS="$NAMESPACE"
+        
+        # -- Gate 1: skip cleanly (green) if the longhorn tier is not present yet. --
+        if ! kubectl get storageclass longhorn >/dev/null 2>&1; then
+          echo "SKIP: 'longhorn' StorageClass absent — node-loss not applicable on this cluster yet"
+          echo NODE_LOSS_SKIPPED_OK
+          exit 0
+        fi
+        
+        # -- Gate 2: a 3-replica volume + single-node-loss headroom needs >= 3 Ready nodes. --
+        READY="$(kubectl get nodes \
+          -o jsonpath='{range .items[*]}{.status.conditions[?(@.type=="Ready")].status}{"\n"}{end}' \
+          | grep -c '^True$' || true)"
+        echo "ready nodes: ${READY}"
+        if [ "${READY:-0}" -lt 3 ]; then
+          echo "SKIP: only ${READY:-0} Ready node(s) (<3) — node-loss resilience not meaningful yet"
+          echo NODE_LOSS_SKIPPED_OK
+          exit 0
+        fi
+        
+        CANARY="node-loss-canary-$(date +%s%N)"
+        
+        # -- GIVEN: a Longhorn PVC (platform default SC = 3 replicas across nodes) + a
+        #    writer pod that writes the canary and flushes it to the replicated volume. --
+        kubectl -n "$NS" apply -f - <<EOF
+        apiVersion: v1
+        kind: PersistentVolumeClaim
+        metadata:
+          name: survivor
+        spec:
+          accessModes: [ReadWriteOnce]
+          storageClassName: longhorn
+          resources:
+            requests:
+              storage: 1Gi
+        EOF
+        
+        apply_pod() {
+          kubectl -n "$NS" apply -f - <<EOF
+        apiVersion: v1
+        kind: Pod
+        metadata:
+          name: $1
+        spec:
+          restartPolicy: Never
+          containers:
+            - name: app
+              image: busybox:1.36.1
+              command: ["sh", "-c", "sleep 3600"]
+              volumeMounts:
+                - name: data
+                  mountPath: /data
+          volumes:
+            - name: data
+              persistentVolumeClaim:
+                claimName: survivor
+        EOF
+        }
+        
+        apply_pod writer
+        kubectl -n "$NS" wait --for=condition=Ready pod/writer --timeout=240s
+        printf '%s' "$CANARY" | kubectl -n "$NS" exec -i writer -- sh -c 'cat > /data/canary && sync'
+        echo "wrote canary: $(kubectl -n "$NS" exec writer -- cat /data/canary)"
+        
+        # The victim node is the one the attached volume currently lives on.
+        VICTIM="$(kubectl -n "$NS" get pod writer -o jsonpath='{.spec.nodeName}')"
+        [ -n "$VICTIM" ] || { echo "FAIL: could not determine writer's node" >&2; exit 1; }
+        echo "victim node (currently hosts the attached volume): $VICTIM"
+        
+        # Best-effort precondition log: if the Longhorn Volume CR is readable, show the
+        # volume is genuinely 3-replica/healthy before we take a node. Non-fatal (the
+        # runner is least-privilege and may not have longhorn.io read rights) — the
+        # data-availability assertion below is the authoritative proof, not this.
+        PVNAME="$(kubectl -n "$NS" get pvc survivor -o jsonpath='{.spec.volumeName}' 2>/dev/null || true)"
+        if [ -n "$PVNAME" ]; then
+          kubectl -n longhorn-system get volumes.longhorn.io "$PVNAME" \
+            -o jsonpath='pre-fault robustness={.status.robustness} replicas={.spec.numberOfReplicas}{"\n"}' \
+            2>/dev/null || echo "(Longhorn Volume CR not readable — continuing; data read is the proof)"
+        fi
+        
+        # -- WHEN: FAULT INJECTION — remove the victim node FROM SERVICE. --
+        #    Label it with THIS test's unique namespace so `finally` can always find and
+        #    uncordon exactly this node; then cordon it; then evict ONLY our own writer
+        #    pod, forcing the volume to detach from the victim. (No `drain` — unrelated
+        #    pods on the node are never touched.)
+        kubectl label node "$VICTIM" "conformance.home.k3s/cordoned-by=$NS" --overwrite
+        kubectl cordon "$VICTIM"
+        echo "cordoned + labelled victim node: $VICTIM"
+        kubectl -n "$NS" delete pod writer --wait=true --timeout=240s
+        echo "evicted writer off the victim node; volume detached from $VICTIM"
+        
+        # -- THEN: a fresh workload re-binds the SAME volume. The victim is unschedulable,
+        #    so the scheduler MUST place the reader on a SURVIVING node; Longhorn re-attaches
+        #    the volume there from its replicas on the other nodes. --
+        apply_pod reader
+        kubectl -n "$NS" wait --for=condition=Ready pod/reader --timeout=360s
+        READER_NODE="$(kubectl -n "$NS" get pod reader -o jsonpath='{.spec.nodeName}')"
+        echo "reader scheduled on surviving node: $READER_NODE (victim was $VICTIM)"
+        if [ "$READER_NODE" = "$VICTIM" ]; then
+          echo "FAIL: reader landed back on the cordoned victim node — node was not removed from service" >&2
+          exit 1
+        fi
+        
+        GOT="$(kubectl -n "$NS" exec reader -- cat /data/canary)"
+        echo "recovered='$GOT' expected='$CANARY'"
+        [ "$GOT" = "$CANARY" ] || { echo "FAIL: data not available after node loss" >&2; exit 1; }
+        echo "volume available + data intact from a surviving node"
+        
+        # Best-effort reconvergence log: if the Longhorn Volume CR is readable, wait
+        # (bounded) for robustness to settle back to available (healthy|degraded — both
+        # serve I/O; a healthy 3-replica volume rebuilds a replica once headroom exists).
+        # Non-fatal for the same least-privilege reason as the pre-fault log.
+        if [ -n "$PVNAME" ]; then
+          for i in $(seq 1 30); do
+            ROB="$(kubectl -n longhorn-system get volumes.longhorn.io "$PVNAME" \
+                  -o jsonpath='{.status.robustness}' 2>/dev/null || true)"
+            [ -z "$ROB" ] && { echo "(Longhorn Volume CR not readable — skipping reconvergence log)"; break; }
+            echo "post-fault robustness[$i]=$ROB"
+            case "$ROB" in healthy|degraded) break ;; esac
+            sleep 10
+          done
+        fi
+        
+        echo NODE_LOSS_VOLUME_AVAILABLE_OK
+    l.go:52: | 23:52:42 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mSCRIPT[0;22m    | [36;1mLOG[0;22m   |
+        === STDOUT
+        ready nodes: 3
+        persistentvolumeclaim/survivor created
+        pod/writer created
+        pod/writer condition met
+        wrote canary: node-loss-canary-1788306678898809444
+        victim node (currently hosts the attached volume): k3s-dev-2
+        pre-fault robustness=healthy replicas=3
+        node/k3s-dev-2 labeled
+        node/k3s-dev-2 cordoned
+        cordoned + labelled victim node: k3s-dev-2
+        pod "writer" deleted from chainsaw-fond-marlin namespace
+        evicted writer off the victim node; volume detached from k3s-dev-2
+        pod/reader created
+        pod/reader condition met
+        reader scheduled on surviving node: k3s-dev-1 (victim was k3s-dev-2)
+        recovered='node-loss-canary-1788306678898809444' expected='node-loss-canary-1788306678898809444'
+        volume available + data intact from a surviving node
+        post-fault robustness[1]=healthy
+        NODE_LOSS_VOLUME_AVAILABLE_OK
+    l.go:52: | 23:52:42 | [32;1mnode-loss[0;22m | [32;1mvolume-stays-available-across-node-loss[0;22m | [32;1mSCRIPT[0;22m    | [32;1mDONE[0;22m  |
+    l.go:52: | 23:52:42 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mTRY[0;22m       | [36;1mEND[0;22m   |
+    l.go:52: | 23:52:42 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mFINALLY[0;22m   | [36;1mBEGIN[0;22m |
+    l.go:52: | 23:52:42 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mCMD[0;22m       | [36;1mRUN[0;22m   |
+        === COMMAND
+        /usr/bin/sh -c set -uo pipefail
+        for n in $(kubectl get nodes -l "conformance.home.k3s/cordoned-by=$NAMESPACE" -o name 2>/dev/null); do
+          kubectl uncordon "${n#node/}" || true
+          kubectl label "$n" "conformance.home.k3s/cordoned-by-" || true
+          echo "restored node to service: ${n#node/}"
+        done
+    l.go:52: | 23:52:43 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mSCRIPT[0;22m    | [36;1mLOG[0;22m   |
+        === STDOUT
+        node/k3s-dev-2 uncordoned
+        node/k3s-dev-2 unlabeled
+        restored node to service: k3s-dev-2
+    l.go:52: | 23:52:43 | [32;1mnode-loss[0;22m | [32;1mvolume-stays-available-across-node-loss[0;22m | [32;1mSCRIPT[0;22m    | [32;1mDONE[0;22m  |
+    l.go:52: | 23:52:43 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mCMD[0;22m       | [36;1mRUN[0;22m   |
+        === COMMAND
+        /usr/bin/sh -c kubectl -n "$NAMESPACE" delete pod writer reader --ignore-not-found --wait=false || true
+        kubectl -n "$NAMESPACE" delete pvc survivor --ignore-not-found --wait=false || true
+        echo "cleanup best-effort; chainsaw namespace teardown finalizes"
+    l.go:52: | 23:52:43 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mSCRIPT[0;22m    | [36;1mLOG[0;22m   |
+        === STDOUT
+        pod "reader" deleted from chainsaw-fond-marlin namespace
+        persistentvolumeclaim "survivor" deleted from chainsaw-fond-marlin namespace
+        cleanup best-effort; chainsaw namespace teardown finalizes
+    l.go:52: | 23:52:43 | [32;1mnode-loss[0;22m | [32;1mvolume-stays-available-across-node-loss[0;22m | [32;1mSCRIPT[0;22m    | [32;1mDONE[0;22m  |
+    l.go:52: | 23:52:43 | [36;1mnode-loss[0;22m | [36;1mvolume-stays-available-across-node-loss[0;22m | [36;1mFINALLY[0;22m   | [36;1mEND[0;22m   |
+    l.go:52: | 23:52:43 | [36;1mnode-loss[0;22m | [36;1m@chainsaw                              [0;22m | [36;1mCLEANUP[0;22m   | [36;1mBEGIN[0;22m |
+    l.go:52: | 23:52:43 | [32;1mnode-loss[0;22m | [32;1m@chainsaw                              [0;22m | [32;1mDELETE[0;22m    | [32;1mOK[0;22m    | v1/Namespace @ chainsaw-fond-marlin
+    l.go:52: | 23:53:29 | [36;1mnode-loss[0;22m | [36;1m@chainsaw                              [0;22m | [36;1mCLEANUP[0;22m   | [36;1mEND[0;22m   |
+--- PASS: chainsaw (0.00s)
+    --- PASS: chainsaw/node-loss (131.09s)
+PASS
+Tests Summary...
+- Passed  tests 1
+- Failed  tests 0
+- Skipped tests 0
+Done.
+merge_junit: merged 1 report(s) -> /work/conformance/_artifacts/report.junit.xml (tests=1 failures=0 errors=0 skipped=0)
+[1m[run.sh][0m Done. JUnit: /work/conformance/_artifacts/report.junit.xml | Coverage: /work/conformance/_artifacts/coverage/coverage.md
@@ -0,0 +1,4 @@
+<testsuites name="chainsaw-report" tests="1" failures="0" errors="0" time="0.000000"><testsuite name="/work/conformance/tests/l3-fault-injection/dr-restore" tests="1" failures="0" errors="0" id="0" time="">
+    <testcase name="dr-restore" classname="" time="149.053701" />
+  </testsuite>
+</testsuites>
@@ -0,0 +1,671 @@
+[1m[run.sh][0m Coverage report first (always)
+[coverage] 42/51 requirements have a scaffolded test (82.4%); 9 gap(s), 0 safety-critical gap(s).
+[coverage] wrote /work/conformance/_artifacts/coverage/coverage.md and /work/conformance/_artifacts/coverage/coverage.json
+[1m[run.sh][0m No L0/L1 offline checks match the selection (layer=l3 reqs='R-STATE-03').
+[1m[run.sh][0m LIGHT pass: no tests selected.
+[1m[run.sh][0m HEAVY pass: 1 test(s) SERIAL (parallel=1) — dr-restore
+Version: 0.2.12
+Loading config (/work/conformance/config/chainsaw-config.yaml)...
+- Using test file: chainsaw-test
+- TestDirs [/work/conformance/tests/l3-fault-injection/dr-restore]
+- SkipDelete false
+- FailFast false
+- ReportFormat 'JUNIT-TEST'
+- ReportName 'chainsaw-report-heavy'
+- ReportPath '/work/conformance/_artifacts'
+- Namespace ''
+- FullName false
+- IncludeTestRegex ''
+- ExcludeTestRegex ''
+- ApplyTimeout 1m30s
+- AssertTimeout 3m0s
+- CleanupTimeout 2m0s
+- DeleteTimeout 2m0s
+- ErrorTimeout 1m0s
+- ExecTimeout 3m0s
+- DeletionPropagationPolicy Background
+- Parallel 1
+- Template true
+- NoCluster false
+- PauseOnFailure false
+Loading tests...
+- dr-restore (/work/conformance/tests/l3-fault-injection/dr-restore)
+Loading values...
+Running tests...
+=== RUN   chainsaw
+=== PAUSE chainsaw
+=== CONT  chainsaw
+=== RUN   chainsaw/dr-restore
+=== PAUSE chainsaw/dr-restore
+=== CONT  chainsaw/dr-restore
+    l.go:52: | 00:19:07 | [32;1mdr-restore[0;22m | [32;1m@chainsaw                                [0;22m | [32;1mCREATE[0;22m    | [32;1mOK[0;22m    | v1/Namespace @ chainsaw-cunning-hen
+    l.go:52: | 00:19:07 | [36;1mdr-restore[0;22m | [36;1massert-backup-target-is-off-cluster      [0;22m | [36;1mTRY[0;22m       | [36;1mBEGIN[0;22m |
+    l.go:52: | 00:19:07 | [36;1mdr-restore[0;22m | [36;1massert-backup-target-is-off-cluster      [0;22m | [36;1mCMD[0;22m       | [36;1mRUN[0;22m   |
+        === COMMAND
+        /usr/bin/sh -c set -eu
+        
+        # ---- helpers -------------------------------------------------------
+        # Classify a kubectl failure: an RBAC denial is a HARNESS DEFECT and must
+        # fail loudly; an absent API is a genuine precondition gap and may skip.
+        die_or_skip() {
+          case "$2" in
+            *orbidden*|*Unauthorized*|*cannot\ list*|*cannot\ get*)
+              echo "FAIL: conformance runner lacks RBAC for $1 -- fix conformance/incluster/rbac.yaml" >&2
+              echo "$2" >&2
+              exit 1 ;;
+            *)
+              echo "SKIP: $1 not available on this cluster -- $2"
+              echo DR_RESTORE_SKIPPED_OK
+              exit 0 ;;
+          esac
+        }
+        
+        ip2int() {
+          _q="$(echo "$1" | tr '.' ' ')"
+          set -- $_q
+          [ $# -eq 4 ] || { echo -1; return 0; }
+          echo $(( ($1 * 16777216) + ($2 * 65536) + ($3 * 256) + $4 ))
+        }
+        
+        # in_cidr <ip> <a.b.c.d/len> -> 0 when the ip is inside the prefix
+        in_cidr() {
+          case "$2" in *"/"*) ;; *) return 1 ;; esac
+          _net="${2%/*}"; _len="${2#*/}"
+          case "$_len" in ''|*[!0-9]*) return 1 ;; esac
+          [ "$_len" -ge 0 ] && [ "$_len" -le 32 ] || return 1
+          _i="$(ip2int "$1")"; _n="$(ip2int "$_net")"
+          [ "$_i" -ge 0 ] && [ "$_n" -ge 0 ] || return 1
+          [ "$_len" -eq 0 ] && return 0
+          _d=1; _s=0
+          while [ "$_s" -lt $((32 - _len)) ]; do _d=$((_d * 2)); _s=$((_s + 1)); done
+          [ $(( _i / _d )) -eq $(( _n / _d )) ]
+        }
+        
+        # ---- Gate 1: the replicated storage tier the DR-critical data lives on --
+        if ! kubectl get storageclass longhorn >/dev/null 2>&1; then
+          echo "SKIP: 'longhorn' StorageClass absent -- no DR-critical data tier on this cluster yet"
+          echo DR_RESTORE_SKIPPED_OK
+          exit 0
+        fi
+        
+        # ---- Gate 2: the Velero API + a configured BackupStorageLocation --------
+        BSL_LINES="$(kubectl get backupstoragelocations.velero.io -A \
+          -o jsonpath='{range .items[*]}{.metadata.namespace}{" "}{.metadata.name}{" "}{.status.phase}{" "}{.spec.provider}{" "}{.spec.default}{" "}{.spec.config.s3Url}{" "}{.spec.objectStorage.bucket}{"\n"}{end}' \
+          2>&1)" || die_or_skip "velero.io/backupstoragelocations" "$BSL_LINES"
+        if [ -z "$(echo "$BSL_LINES" | tr -d '[:space:]')" ]; then
+          echo "SKIP: Velero API present but NO BackupStorageLocation is configured -- no off-cluster backup target yet"
+          echo DR_RESTORE_SKIPPED_OK
+          exit 0
+        fi
+        echo "backup storage locations:"
+        echo "$BSL_LINES"
+        
+        VNS="$(echo "$BSL_LINES" | head -1 | cut -d' ' -f1)"
+        
+        # ---- Gate 3: Velero server + node-agent (kopia FSB) actually ready -------
+        # File System Backup is the volume-DATA path (platform/velero/helmrelease.yaml:
+        # deployNodeAgent=true, uploaderType=kopia, snapshotsEnabled=false). Without a
+        # ready node-agent no volume data can be captured, so the drill is not runnable.
+        VREADY=0; NAREADY=0
+        for i in $(seq 1 12); do
+          VREADY="$(kubectl -n "$VNS" get deploy velero -o jsonpath='{.status.readyReplicas}' 2>/dev/null || true)"
+          NAREADY="$(kubectl -n "$VNS" get daemonset node-agent -o jsonpath='{.status.numberReady}' 2>/dev/null || true)"
+          echo "poll $i: velero readyReplicas=${VREADY:-0} node-agent numberReady=${NAREADY:-0}"
+          if [ "${VREADY:-0}" -ge 1 ] && [ "${NAREADY:-0}" -ge 1 ]; then break; fi
+          sleep 10
+        done
+        if [ "${VREADY:-0}" -lt 1 ] || [ "${NAREADY:-0}" -lt 1 ]; then
+          echo "SKIP: Velero server and/or its node-agent DaemonSet are not ready in ns '$VNS' -- backup/restore path not available"
+          echo DR_RESTORE_SKIPPED_OK
+          exit 0
+        fi
+        
+        # ---- Pick the BSL this drill will use: prefer the default, and it MUST be
+        #      Available. A CONFIGURED-BUT-UNAVAILABLE target is NOT a precondition
+        #      gap -- it is a live R-STATE-03 defect, so it FAILS (after a bounded
+        #      wait for first-validation on a cold start), it does not skip. --------
+        BSL_NS=""; BSL_NAME=""; BSL_URL=""; BSL_BUCKET=""
+        for i in $(seq 1 12); do
+          BSL_LINES="$(kubectl get backupstoragelocations.velero.io -A \
+            -o jsonpath='{range .items[*]}{.metadata.namespace}{" "}{.metadata.name}{" "}{.status.phase}{" "}{.spec.provider}{" "}{.spec.default}{" "}{.spec.config.s3Url}{" "}{.spec.objectStorage.bucket}{"\n"}{end}' 2>/dev/null || true)"
+          CAND="$(echo "$BSL_LINES" | grep ' Available ' | grep ' true ' | head -1 || true)"
+          [ -n "$CAND" ] || CAND="$(echo "$BSL_LINES" | grep ' Available ' | head -1 || true)"
+          if [ -n "$CAND" ]; then
+            BSL_NS="$(echo "$CAND" | cut -d' ' -f1)"
+            BSL_NAME="$(echo "$CAND" | cut -d' ' -f2)"
+            BSL_URL="$(echo "$CAND" | cut -d' ' -f6)"
+            BSL_BUCKET="$(echo "$CAND" | cut -d' ' -f7)"
+            break
+          fi
+          echo "poll $i: no Available BackupStorageLocation yet"
+          sleep 10
+        done
+        if [ -z "$BSL_NAME" ]; then
+          echo "FAIL: a BackupStorageLocation is configured but NONE reached phase 'Available'." >&2
+          echo "      The off-cluster backup target is unreachable -- R-STATE-03 is BROKEN, not merely untested." >&2
+          echo "$BSL_LINES" >&2
+          exit 1
+        fi
+        echo "using BSL ${BSL_NS}/${BSL_NAME}  bucket=${BSL_BUCKET}  endpoint=${BSL_URL}"
+        
+        # ---- OFF-CLUSTER PROOF (1): an endpoint we can evaluate ------------------
+        if [ -z "$BSL_URL" ]; then
+          echo "FAIL: BackupStorageLocation ${BSL_NS}/${BSL_NAME} exposes no spec.config.s3Url;" >&2
+          echo "      the OFF-CLUSTER property of the backup target cannot be established, so this" >&2
+          echo "      test refuses to claim it. (Extend this check for a non-S3 provider.)" >&2
+          exit 1
+        fi
+        HOST="${BSL_URL#*://}"      # strip scheme
+        HOST="${HOST%%/*}"          # strip path
+        HOST="${HOST%%:*}"          # strip port
+        echo "backup endpoint host: $HOST"
+        
+        case "$HOST" in
+          localhost|*.svc|*.svc.cluster.local|*.cluster.local)
+            echo "FAIL: backup endpoint '$HOST' is a CLUSTER-INTERNAL name -- the backup target is IN the cluster." >&2
+            echo "      An in-cluster backup store cannot satisfy R-STATE-03 (off-cluster backup)." >&2
+            exit 1 ;;
+        esac
+        
+        # Resolve to an IPv4 address. If it cannot be resolved we CANNOT establish the
+        # off-cluster property -- that is a failure, never a silent pass.
+        case "$HOST" in
+          *[!0-9.]*)
+            # Endpoint given as a name. Try the resolvers that may exist in the
+            # runner image, in order; if none is available or none resolves, the
+            # test FAILS below rather than guessing.
+            EPIP="$(getent ahostsv4 "$HOST" 2>/dev/null | head -1 | cut -d' ' -f1 || true)"
+            [ -n "$EPIP" ] || EPIP="$(getent hosts "$HOST" 2>/dev/null | head -1 | cut -d' ' -f1 || true)"
+            [ -n "$EPIP" ] || EPIP="$(nslookup "$HOST" 2>/dev/null | grep -A2 '^Name:' | grep '^Address' | head -1 | sed 's/.*: *//' || true)" ;;
+          *) EPIP="$HOST" ;;
+        esac
+        if [ -z "$EPIP" ]; then
+          echo "FAIL: could not resolve backup endpoint host '$HOST' to an IPv4 address;" >&2
+          echo "      the OFF-CLUSTER property cannot be asserted, so this test does not pass." >&2
+          exit 1
+        fi
+        echo "backup endpoint resolves to: $EPIP"
+        
+        # ---- OFF-CLUSTER PROOF (2): the endpoint is outside every cluster address --
+        case "$EPIP" in 127.*|0.0.0.0) echo "FAIL: backup endpoint $EPIP is loopback -- not off-cluster" >&2; exit 1 ;; esac
+        
+        NODE_IPS="$(kubectl get nodes -o jsonpath='{range .items[*]}{range .status.addresses[*]}{.address}{"\n"}{end}{end}' 2>/dev/null || true)"
+        for a in $NODE_IPS; do
+          if [ "$a" = "$EPIP" ]; then
+            echo "FAIL: backup endpoint $EPIP is a NODE address of this cluster -- the backup is not off-cluster." >&2
+            exit 1
+          fi
+        done
+        echo "endpoint is not any node address (checked $(echo "$NODE_IPS" | grep -c . || true) node addresses)"
+        
+        SVC_IPS="$(kubectl get svc -A -o jsonpath='{range .items[*]}{.spec.clusterIP}{"\n"}{end}' 2>/dev/null || true)"
+        for a in $SVC_IPS; do
+          if [ "$a" = "$EPIP" ]; then
+            echo "FAIL: backup endpoint $EPIP is a Service ClusterIP -- the backup target lives INSIDE the cluster." >&2
+            exit 1
+          fi
+        done
+        echo "endpoint is not any Service ClusterIP (checked $(echo "$SVC_IPS" | grep -c . || true))"
+        
+        POD_IPS="$(kubectl get pods -A -o jsonpath='{range .items[*]}{.status.podIP}{"\n"}{end}' 2>/dev/null || true)"
+        for a in $POD_IPS; do
+          if [ "$a" = "$EPIP" ]; then
+            echo "FAIL: backup endpoint $EPIP is a POD IP -- the backup target is an in-cluster pod." >&2
+            exit 1
+          fi
+        done
+        echo "endpoint is not any Pod IP (checked $(echo "$POD_IPS" | grep -c . || true))"
+        
+        POD_CIDRS="$(kubectl get nodes -o jsonpath='{range .items[*]}{.spec.podCIDR}{"\n"}{range .spec.podCIDRs[*]}{@}{"\n"}{end}{end}' 2>/dev/null || true)"
+        for c in $POD_CIDRS; do
+          case "$c" in *:*) continue ;; esac      # IPv6 prefixes are out of scope here
+          if in_cidr "$EPIP" "$c"; then
+            echo "FAIL: backup endpoint $EPIP falls inside node podCIDR $c -- it is in the cluster pod network." >&2
+            exit 1
+          fi
+        done
+        echo "endpoint is outside every node podCIDR (checked: $(echo "$POD_CIDRS" | tr '\n' ' '))"
+        
+        # Best-effort (needs networking.k8s.io/ServiceCIDR, which the least-privilege
+        # runner may not read): the checks above are the authoritative ones.
+        SVC_CIDRS="$(kubectl get servicecidrs.networking.k8s.io -o jsonpath='{range .items[*]}{range .spec.cidrs[*]}{@}{"\n"}{end}{end}' 2>/dev/null || true)"
+        if [ -n "$SVC_CIDRS" ]; then
+          for c in $SVC_CIDRS; do
+            case "$c" in *:*) continue ;; esac
+            if in_cidr "$EPIP" "$c"; then
+              echo "FAIL: backup endpoint $EPIP falls inside the Service CIDR $c -- it is in the cluster." >&2
+              exit 1
+            fi
+          done
+          echo "endpoint is outside every ServiceCIDR ($(echo "$SVC_CIDRS" | tr '\n' ' '))"
+        else
+          echo "(ServiceCIDR objects unreadable -- skipping that best-effort check; ClusterIP/PodIP/podCIDR checks stand)"
+        fi
+        
+        echo "OFF_CLUSTER_TARGET_OK  bsl=${BSL_NS}/${BSL_NAME} endpoint=${EPIP} bucket=${BSL_BUCKET}"
+    l.go:52: | 00:19:11 | [36;1mdr-restore[0;22m | [36;1massert-backup-target-is-off-cluster      [0;22m | [36;1mSCRIPT[0;22m    | [36;1mLOG[0;22m   |
+        === STDOUT
+        backup storage locations:
+        velero default Available aws true http://192.168.1.9:9000 velero
+        poll 1: velero readyReplicas=1 node-agent numberReady=3
+        using BSL velero/default  bucket=velero  endpoint=http://192.168.1.9:9000
+        backup endpoint host: 192.168.1.9
+        backup endpoint resolves to: 192.168.1.9
+        endpoint is not any node address (checked 6 node addresses)
+        endpoint is not any Service ClusterIP (checked 81)
+        endpoint is not any Pod IP (checked 186)
+        endpoint is outside every node podCIDR (checked: 10.42.0.0/24 10.42.0.0/24 10.42.1.0/24 10.42.1.0/24 10.42.2.0/24 10.42.2.0/24 )
+        endpoint is outside every ServiceCIDR (10.43.0.0/16 )
+        OFF_CLUSTER_TARGET_OK  bsl=velero/default endpoint=192.168.1.9 bucket=velero
+    l.go:52: | 00:19:11 | [32;1mdr-restore[0;22m | [32;1massert-backup-target-is-off-cluster      [0;22m | [32;1mSCRIPT[0;22m    | [32;1mDONE[0;22m  |
+    l.go:52: | 00:19:11 | [36;1mdr-restore[0;22m | [36;1massert-backup-target-is-off-cluster      [0;22m | [36;1mTRY[0;22m       | [36;1mEND[0;22m   |
+    l.go:52: | 00:19:11 | [36;1mdr-restore[0;22m | [36;1massert-backups-are-scheduled             [0;22m | [36;1mTRY[0;22m       | [36;1mBEGIN[0;22m |
+    l.go:52: | 00:19:11 | [36;1mdr-restore[0;22m | [36;1massert-backups-are-scheduled             [0;22m | [36;1mCMD[0;22m       | [36;1mRUN[0;22m   |
+        === COMMAND
+        /usr/bin/sh -c set -eu
+        SCHED="$(kubectl get schedules.velero.io -A \
+          -o jsonpath='{range .items[*]}{.metadata.namespace}{"/"}{.metadata.name}{" phase="}{.status.phase}{" cron="}{.spec.schedule}{" lastBackup="}{.status.lastBackup}{"\n"}{end}' 2>/dev/null || true)"
+        if [ -z "$(echo "$SCHED" | tr -d '[:space:]')" ]; then
+          # Distinguish "Velero absent" (skip, in lock-step with step 1) from
+          # "Velero present but nothing scheduled" (a real R-STATE-03 defect).
+          if kubectl get backupstoragelocations.velero.io -A >/dev/null 2>&1; then
+            if [ -z "$(kubectl get backupstoragelocations.velero.io -A -o name 2>/dev/null || true)" ]; then
+              echo "SKIP: no BackupStorageLocation configured -- scheduling not applicable yet"
+              echo DR_SCHEDULE_SKIPPED_OK
+              exit 0
+            fi
+            echo "FAIL: Velero is configured with a backup target but declares NO Schedule --" >&2
+            echo "      R-STATE-03 requires SCHEDULED off-cluster backups, not manual ones." >&2
+            exit 1
+          fi
+          echo "SKIP: Velero API absent -- backup scheduling not applicable on this cluster yet"
+          echo DR_SCHEDULE_SKIPPED_OK
+          exit 0
+        fi
+        echo "velero schedules:"
+        echo "$SCHED"
+        # A Schedule that exists but is paused/disabled backs nothing up.
+        if echo "$SCHED" | grep -q 'phase=Enabled'; then
+          echo BACKUPS_ARE_SCHEDULED_OK
+        else
+          echo "FAIL: no Velero Schedule is in phase 'Enabled' -- scheduled off-cluster backups are not running." >&2
+          exit 1
+        fi
+    l.go:52: | 00:19:11 | [36;1mdr-restore[0;22m | [36;1massert-backups-are-scheduled             [0;22m | [36;1mSCRIPT[0;22m    | [36;1mLOG[0;22m   |
+        === STDOUT
+        velero schedules:
+        velero/velero-daily phase=Enabled cron=0 3 * * * lastBackup=2026-09-01T03:00:27Z
+        velero/velero-daily-resources-only phase=Enabled cron=0 3 * * * lastBackup=2026-09-01T03:00:27Z
+        BACKUPS_ARE_SCHEDULED_OK
+    l.go:52: | 00:19:11 | [32;1mdr-restore[0;22m | [32;1massert-backups-are-scheduled             [0;22m | [32;1mSCRIPT[0;22m    | [32;1mDONE[0;22m  |
+    l.go:52: | 00:19:11 | [36;1mdr-restore[0;22m | [36;1massert-backups-are-scheduled             [0;22m | [36;1mTRY[0;22m       | [36;1mEND[0;22m   |
+    l.go:52: | 00:19:11 | [36;1mdr-restore[0;22m | [36;1mdata-restores-from-the-off-cluster-backup[0;22m | [36;1mTRY[0;22m       | [36;1mBEGIN[0;22m |
+    l.go:52: | 00:19:11 | [36;1mdr-restore[0;22m | [36;1mdata-restores-from-the-off-cluster-backup[0;22m | [36;1mCMD[0;22m       | [36;1mRUN[0;22m   |
+        === COMMAND
+        /usr/bin/sh -c set -eu
+        NS="$NAMESPACE"
+        SRC="${NS}-dr-src"          # scratch source namespace (destroyed by design)
+        DST="${NS}-dr-dst"          # clean restore target (must not pre-exist)
+        BK="${NS}-dr-backup"
+        RS="${NS}-dr-restore"
+        OWNER_LABEL="conformance.home.k3s/created-by=${NS}"
+        
+        # ---- Re-derive the preconditions (steps do not share shell state). Every
+        #      skip below mirrors step 1 exactly, so the whole test skips or runs
+        #      as a unit -- it can never half-run. -----------------------------
+        if ! kubectl get storageclass longhorn >/dev/null 2>&1; then
+          echo "SKIP: 'longhorn' StorageClass absent"; echo DR_RESTORE_SKIPPED_OK; exit 0
+        fi
+        BSL_LINES="$(kubectl get backupstoragelocations.velero.io -A \
+          -o jsonpath='{range .items[*]}{.metadata.namespace}{" "}{.metadata.name}{" "}{.status.phase}{" "}{.spec.default}{"\n"}{end}' 2>/dev/null || true)"
+        CAND="$(echo "$BSL_LINES" | grep ' Available ' | grep ' true$' | head -1 || true)"
+        [ -n "$CAND" ] || CAND="$(echo "$BSL_LINES" | grep ' Available ' | head -1 || true)"
+        if [ -z "$CAND" ]; then
+          echo "SKIP: no Available BackupStorageLocation (see the off-cluster step for the authoritative verdict)"
+          echo DR_RESTORE_SKIPPED_OK; exit 0
+        fi
+        VNS="$(echo "$CAND" | cut -d' ' -f1)"
+        BSL_NAME="$(echo "$CAND" | cut -d' ' -f2)"
+        if [ "$(kubectl -n "$VNS" get daemonset node-agent -o jsonpath='{.status.numberReady}' 2>/dev/null || echo 0)" -lt 1 ]; then
+          echo "SKIP: Velero node-agent (kopia FSB) not ready -- volume data cannot be backed up"
+          echo DR_RESTORE_SKIPPED_OK; exit 0
+        fi
+        echo "velero ns=$VNS bsl=$BSL_NAME src=$SRC dst=$DST"
+        
+        # A clean restore target means PREVIOUSLY NONEXISTENT, and the source name must
+        # be free. If either is lying around from an aborted run, remove it before we
+        # claim "clean" -- and fail loudly if it will not go, because a half-deleted
+        # namespace would silently invalidate the destroy proof below.
+        kubectl delete namespace "$DST" "$SRC" --ignore-not-found --wait=true --timeout=300s
+        
+        # ============================ GIVEN ==============================
+        # A DR-critical stateful workload with known data on the replicated tier.
+        CANARY="dr-canary-$(date +%s%N)"
+        kubectl create namespace "$SRC"
+        kubectl label namespace "$SRC" "$OWNER_LABEL" --overwrite
+        
+        kubectl -n "$SRC" apply -f - <<EOF
+        apiVersion: v1
+        kind: PersistentVolumeClaim
+        metadata:
+          name: dr-data
+          labels:
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          accessModes: [ReadWriteOnce]
+          storageClassName: longhorn
+          resources:
+            requests:
+              storage: 1Gi
+        EOF
+        
+        kubectl -n "$SRC" apply -f - <<EOF
+        apiVersion: v1
+        kind: Pod
+        metadata:
+          name: dr-workload
+          labels:
+            app: dr-workload
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          restartPolicy: Never
+          containers:
+            - name: app
+              image: busybox:1.36.1
+              command: ["sh", "-c", "sleep 7200"]
+              volumeMounts:
+                - name: data
+                  mountPath: /data
+          volumes:
+            - name: data
+              persistentVolumeClaim:
+                claimName: dr-data
+        EOF
+        
+        kubectl -n "$SRC" wait --for=condition=Ready pod/dr-workload --timeout=300s
+        printf '%s' "$CANARY" | kubectl -n "$SRC" exec -i dr-workload -- sh -c 'cat > /data/canary && sync'
+        echo "seeded canary: $(kubectl -n "$SRC" exec dr-workload -- cat /data/canary)"
+        
+        ORIG_PV="$(kubectl -n "$SRC" get pvc dr-data -o jsonpath='{.spec.volumeName}')"
+        [ -n "$ORIG_PV" ] || { echo "FAIL: source PVC never bound to a PV" >&2; exit 1; }
+        echo "original in-cluster PersistentVolume: $ORIG_PV"
+        
+        # ======================= WHEN (part 1): back up off-cluster =======
+        # Created as a Velero Backup CR -- exactly what `velero backup create` does.
+        # defaultVolumesToFsBackup:true selects the kopia File System Backup path, so
+        # the VOLUME DATA (not just the resource JSON) is uploaded to the object store.
+        # ttl is short: if the finally-step DeleteBackupRequest is ever lost, Velero's
+        # own GC still removes this drill's objects from the bucket.
+        kubectl apply -f - <<EOF
+        apiVersion: velero.io/v1
+        kind: Backup
+        metadata:
+          name: ${BK}
+          namespace: ${VNS}
+          labels:
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          includedNamespaces: [${SRC}]
+          storageLocation: ${BSL_NAME}
+          snapshotVolumes: false
+          defaultVolumesToFsBackup: true
+          ttl: 2h0m0s
+        EOF
+        
+        BPHASE=""
+        for i in $(seq 1 90); do
+          BPHASE="$(kubectl -n "$VNS" get backups.velero.io "$BK" -o jsonpath='{.status.phase}' 2>/dev/null || true)"
+          echo "poll $i: backup phase=${BPHASE:-<pending>}"
+          case "${BPHASE:-}" in
+            Completed|Failed|PartiallyFailed|FailedValidation) break ;;
+          esac
+          sleep 10
+        done
+        if [ "${BPHASE:-}" != "Completed" ]; then
+          echo "FAIL: off-cluster backup did not complete (phase=${BPHASE:-<timeout>})" >&2
+          kubectl -n "$VNS" get backups.velero.io "$BK" -o yaml >&2 || true
+          exit 1
+        fi
+        echo "backup $BK Completed to ${BSL_NAME}"
+        
+        # ---- OFF-CLUSTER PROOF (3): the VOLUME DATA really landed in the remote
+        #      kopia repository -- a PodVolumeBackup Completed with a snapshot ID.
+        PVB="$(kubectl -n "$VNS" get podvolumebackups.velero.io \
+                 -l velero.io/backup-name="$BK" \
+                 -o jsonpath='{range .items[*]}{.metadata.name}{" "}{.status.phase}{" "}{.status.snapshotID}{"\n"}{end}' 2>/dev/null || true)"
+        echo "pod volume backups:"
+        echo "$PVB"
+        if [ -z "$(echo "$PVB" | tr -d '[:space:]')" ]; then
+          echo "FAIL: the backup captured NO pod volume data (no PodVolumeBackup)." >&2
+          echo "      Resource-only backups cannot restore DR-critical DATA." >&2
+          exit 1
+        fi
+        # A line is "<name> <phase> <snapshotID>"; require Completed AND a
+        # non-empty snapshot ID (an empty ID means nothing reached the repository).
+        GOOD_PVB="$(echo "$PVB" | grep -cE ' Completed [^[:space:]]+$' || true)"
+        if [ "${GOOD_PVB:-0}" -lt 1 ]; then
+          echo "FAIL: no PodVolumeBackup reached phase Completed with a snapshot ID --" >&2
+          echo "      the volume data did not reach the off-cluster repository." >&2
+          exit 1
+        fi
+        echo "volume data uploaded off-cluster (PodVolumeBackup Completed with a kopia snapshotID)"
+        
+        # ============ WHEN (part 2): FAULT INJECTION -- annihilate the source ====
+        # Destroy EVERY in-cluster copy: the pod, the PVC, the namespace, and the
+        # underlying PersistentVolume (and with it the Longhorn replicas). After this
+        # there is no in-cluster source the restore could quietly read from.
+        kubectl delete namespace "$SRC" --wait=true --timeout=420s
+        for i in $(seq 1 30); do
+          if ! kubectl get namespace "$SRC" >/dev/null 2>&1; then break; fi
+          echo "poll $i: waiting for namespace $SRC to disappear"
+          sleep 10
+        done
+        if kubectl get namespace "$SRC" >/dev/null 2>&1; then
+          echo "FAIL: source namespace $SRC did not terminate; the destroy step is not convincing" >&2
+          exit 1
+        fi
+        echo "source namespace destroyed"
+        
+        # The longhorn StorageClass reclaims Delete, so the PV should already be gone;
+        # force it if a Retain policy (or a stuck finalizer) left it behind, because a
+        # surviving PV would make the restore prove nothing about off-cluster recovery.
+        kubectl delete pv "$ORIG_PV" --ignore-not-found --wait=false || true
+        for i in $(seq 1 30); do
+          if ! kubectl get pv "$ORIG_PV" >/dev/null 2>&1; then break; fi
+          echo "poll $i: waiting for PersistentVolume $ORIG_PV to disappear"
+          sleep 10
+        done
+        if kubectl get pv "$ORIG_PV" >/dev/null 2>&1; then
+          echo "FAIL: the original PersistentVolume $ORIG_PV SURVIVED the destroy step." >&2
+          echo "      An in-cluster copy of the data still exists, so a successful restore" >&2
+          echo "      would NOT prove recovery from the off-cluster backup. Refusing to pass." >&2
+          exit 1
+        fi
+        echo "original PersistentVolume $ORIG_PV is GONE -- no in-cluster copy of the data remains"
+        
+        # Best-effort corroboration (the least-privilege runner may not read longhorn.io):
+        # the Longhorn Volume CR and its replicas should be gone too.
+        if kubectl -n longhorn-system get volumes.longhorn.io "$ORIG_PV" >/dev/null 2>&1; then
+          echo "FAIL: Longhorn Volume $ORIG_PV still exists after PV deletion -- replicas survive in-cluster" >&2
+          exit 1
+        fi
+        echo "(longhorn Volume CR $ORIG_PV not present -- either deleted or not readable by this identity)"
+        
+        # ============================ RESTORE ============================
+        # Into a CLEAN, previously-nonexistent namespace (Velero creates it), which is
+        # the catalog's "restored into a clean state".
+        kubectl apply -f - <<EOF
+        apiVersion: velero.io/v1
+        kind: Restore
+        metadata:
+          name: ${RS}
+          namespace: ${VNS}
+          labels:
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          backupName: ${BK}
+          includedNamespaces: [${SRC}]
+          namespaceMapping:
+            ${SRC}: ${DST}
+          existingResourcePolicy: none
+        EOF
+        
+        RPHASE=""
+        for i in $(seq 1 90); do
+          RPHASE="$(kubectl -n "$VNS" get restores.velero.io "$RS" -o jsonpath='{.status.phase}' 2>/dev/null || true)"
+          echo "poll $i: restore phase=${RPHASE:-<pending>}"
+          case "${RPHASE:-}" in
+            Completed|Failed|PartiallyFailed|FailedValidation) break ;;
+          esac
+          sleep 10
+        done
+        if [ "${RPHASE:-}" != "Completed" ]; then
+          echo "FAIL: restore did not complete (phase=${RPHASE:-<timeout>})" >&2
+          kubectl -n "$VNS" get restores.velero.io "$RS" -o yaml >&2 || true
+          kubectl -n "$VNS" get podvolumerestores.velero.io -l velero.io/restore-name="$RS" -o wide >&2 || true
+          exit 1
+        fi
+        echo "restore $RS Completed into $DST"
+        
+        # ============================= THEN ==============================
+        # The service returns WITH ITS DATA. With kopia FSB the restored pod carries a
+        # `restore-wait` init container that blocks until the node-agent has written the
+        # volume contents back, so Ready here already implies the data landed.
+        if ! kubectl -n "$DST" wait --for=condition=Ready pod/dr-workload --timeout=600s; then
+          echo "FAIL: restored workload never became Ready in the clean namespace $DST" >&2
+          kubectl -n "$DST" describe pod dr-workload >&2 || true
+          kubectl -n "$VNS" get podvolumerestores.velero.io -l velero.io/restore-name="$RS" -o wide >&2 || true
+          exit 1
+        fi
+        
+        NEW_PV="$(kubectl -n "$DST" get pvc dr-data -o jsonpath='{.spec.volumeName}' 2>/dev/null || true)"
+        echo "restored PVC bound to PersistentVolume: ${NEW_PV:-<none>}"
+        [ -n "$NEW_PV" ] || { echo "FAIL: restored PVC did not bind a PV" >&2; exit 1; }
+        if [ "$NEW_PV" = "$ORIG_PV" ]; then
+          echo "FAIL: the restored PVC rebound the ORIGINAL PersistentVolume ($ORIG_PV)." >&2
+          echo "      That is an in-cluster survival, not an off-cluster restore." >&2
+          exit 1
+        fi
+        echo "restored onto a NEW volume ($NEW_PV != $ORIG_PV) -- the data came from outside the cluster"
+        
+        GOT="$(kubectl -n "$DST" exec dr-workload -- cat /data/canary)"
+        echo "recovered='$GOT' expected='$CANARY'"
+        if [ "$GOT" != "$CANARY" ]; then
+          echo "FAIL: restored data does not match what was backed up -- DR restore lost/corrupted data" >&2
+          exit 1
+        fi
+        
+        echo DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK
+    l.go:52: | 00:21:16 | [36;1mdr-restore[0;22m | [36;1mdata-restores-from-the-off-cluster-backup[0;22m | [36;1mSCRIPT[0;22m    | [36;1mLOG[0;22m   |
+        === STDOUT
+        velero ns=velero bsl=default src=chainsaw-cunning-hen-dr-src dst=chainsaw-cunning-hen-dr-dst
+        namespace/chainsaw-cunning-hen-dr-src created
+        namespace/chainsaw-cunning-hen-dr-src labeled
+        persistentvolumeclaim/dr-data created
+        pod/dr-workload created
+        pod/dr-workload condition met
+        seeded canary: dr-canary-1788308352223263220
+        original in-cluster PersistentVolume: pvc-b9523c15-770e-4fc5-8130-ca2e9d9da745
+        backup.velero.io/chainsaw-cunning-hen-dr-backup created
+        poll 1: backup phase=InProgress
+        poll 2: backup phase=InProgress
+        poll 3: backup phase=Completed
+        backup chainsaw-cunning-hen-dr-backup Completed to default
+        pod volume backups:
+        chainsaw-cunning-hen-dr-backup-l95lw Completed 47fa2737115e17142fb41857cef4e779
+        volume data uploaded off-cluster (PodVolumeBackup Completed with a kopia snapshotID)
+        namespace "chainsaw-cunning-hen-dr-src" deleted
+        source namespace destroyed
+        original PersistentVolume pvc-b9523c15-770e-4fc5-8130-ca2e9d9da745 is GONE -- no in-cluster copy of the data remains
+        (longhorn Volume CR pvc-b9523c15-770e-4fc5-8130-ca2e9d9da745 not present -- either deleted or not readable by this identity)
+        restore.velero.io/chainsaw-cunning-hen-dr-restore created
+        poll 1: restore phase=InProgress
+        poll 2: restore phase=InProgress
+        poll 3: restore phase=InProgress
+        poll 4: restore phase=Completed
+        restore chainsaw-cunning-hen-dr-restore Completed into chainsaw-cunning-hen-dr-dst
+        pod/dr-workload condition met
+        restored PVC bound to PersistentVolume: pvc-63c47973-9c7f-4423-a27e-caa008026e49
+        restored onto a NEW volume (pvc-63c47973-9c7f-4423-a27e-caa008026e49 != pvc-b9523c15-770e-4fc5-8130-ca2e9d9da745) -- the data came from outside the cluster
+        recovered='dr-canary-1788308352223263220' expected='dr-canary-1788308352223263220'
+        DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK
+        === STDERR
+        Defaulted container "app" out of: app, restore-wait (init)
+    l.go:52: | 00:21:16 | [32;1mdr-restore[0;22m | [32;1mdata-restores-from-the-off-cluster-backup[0;22m | [32;1mSCRIPT[0;22m    | [32;1mDONE[0;22m  |
+    l.go:52: | 00:21:16 | [36;1mdr-restore[0;22m | [36;1mdata-restores-from-the-off-cluster-backup[0;22m | [36;1mTRY[0;22m       | [36;1mEND[0;22m   |
+    l.go:52: | 00:21:16 | [36;1mdr-restore[0;22m | [36;1mdata-restores-from-the-off-cluster-backup[0;22m | [36;1mFINALLY[0;22m   | [36;1mBEGIN[0;22m |
+    l.go:52: | 00:21:16 | [36;1mdr-restore[0;22m | [36;1mdata-restores-from-the-off-cluster-backup[0;22m | [36;1mCMD[0;22m       | [36;1mRUN[0;22m   |
+        === COMMAND
+        /usr/bin/sh -c set -u
+        NS="$NAMESPACE"
+        SRC="${NS}-dr-src"; DST="${NS}-dr-dst"; BK="${NS}-dr-backup"; RS="${NS}-dr-restore"
+        
+        VNS="$(kubectl get backupstoragelocations.velero.io -A -o jsonpath='{.items[0].metadata.namespace}' 2>/dev/null || true)"
+        
+        # Velero objects first: a DeleteBackupRequest makes Velero remove the backup
+        # DATA from the off-cluster bucket, not just the CR (self-cleaning contract).
+        if [ -n "$VNS" ]; then
+          kubectl -n "$VNS" delete restores.velero.io "$RS" --ignore-not-found --wait=false || true
+          if kubectl -n "$VNS" get backups.velero.io "$BK" >/dev/null 2>&1; then
+            kubectl apply -f - <<EOF || true
+        apiVersion: velero.io/v1
+        kind: DeleteBackupRequest
+        metadata:
+          name: ${BK}-delete
+          namespace: ${VNS}
+          labels:
+            conformance.home.k3s/created-by: ${NS}
+        spec:
+          backupName: ${BK}
+        EOF
+            for i in $(seq 1 18); do
+              kubectl -n "$VNS" get backups.velero.io "$BK" >/dev/null 2>&1 || break
+              sleep 10
+            done
+            # Backstop if Velero could not process the request (the 2h ttl also GCs it).
+            kubectl -n "$VNS" delete backups.velero.io "$BK" --ignore-not-found --wait=false || true
+            kubectl -n "$VNS" delete deletebackuprequests.velero.io "${BK}-delete" --ignore-not-found --wait=false || true
+          fi
+          echo "velero objects for $NS cleaned up (ns $VNS)"
+        fi
+        
+        # Scratch namespaces (both, in case the run aborted at any point).
+        for n in "$DST" "$SRC"; do
+          kubectl delete namespace "$n" --ignore-not-found --wait=false || true
+        done
+        # Anything left labelled as ours (defensive; the two names above are the only
+        # namespaces this test ever creates).
+        kubectl delete namespace -l "conformance.home.k3s/created-by=${NS}" --ignore-not-found --wait=false || true
+        
+        # Released PVs from either namespace's PVCs would otherwise leak storage.
+        for pv in $(kubectl get pv -o jsonpath='{range .items[*]}{.metadata.name}{" "}{.spec.claimRef.namespace}{"\n"}{end}' 2>/dev/null | grep -E " (${SRC}|${DST})$" | cut -d' ' -f1 || true); do
+          kubectl delete pv "$pv" --ignore-not-found --wait=false || true
+          echo "released leftover PersistentVolume: $pv"
+        done
+        
+        echo "dr-restore teardown complete (best-effort; every object was created by this test)"
+    l.go:52: | 00:21:28 | [36;1mdr-restore[0;22m | [36;1mdata-restores-from-the-off-cluster-backup[0;22m | [36;1mSCRIPT[0;22m    | [36;1mLOG[0;22m   |
+        === STDOUT
+        restore.velero.io "chainsaw-cunning-hen-dr-restore" deleted from velero namespace
+        deletebackuprequest.velero.io/chainsaw-cunning-hen-dr-backup-delete created
+        velero objects for chainsaw-cunning-hen cleaned up (ns velero)
+        namespace "chainsaw-cunning-hen-dr-dst" deleted
+        namespace "chainsaw-cunning-hen-dr-dst" deleted
+        persistentvolume "pvc-63c47973-9c7f-4423-a27e-caa008026e49" deleted
+        released leftover PersistentVolume: pvc-63c47973-9c7f-4423-a27e-caa008026e49
+        dr-restore teardown complete (best-effort; every object was created by this test)
+    l.go:52: | 00:21:28 | [32;1mdr-restore[0;22m | [32;1mdata-restores-from-the-off-cluster-backup[0;22m | [32;1mSCRIPT[0;22m    | [32;1mDONE[0;22m  |
+    l.go:52: | 00:21:28 | [36;1mdr-restore[0;22m | [36;1mdata-restores-from-the-off-cluster-backup[0;22m | [36;1mFINALLY[0;22m   | [36;1mEND[0;22m   |
+    l.go:52: | 00:21:28 | [36;1mdr-restore[0;22m | [36;1m@chainsaw                                [0;22m | [36;1mCLEANUP[0;22m   | [36;1mBEGIN[0;22m |
+    l.go:52: | 00:21:28 | [32;1mdr-restore[0;22m | [32;1m@chainsaw                                [0;22m | [32;1mDELETE[0;22m    | [32;1mOK[0;22m    | v1/Namespace @ chainsaw-cunning-hen
+    l.go:52: | 00:21:36 | [36;1mdr-restore[0;22m | [36;1m@chainsaw                                [0;22m | [36;1mCLEANUP[0;22m   | [36;1mEND[0;22m   |
+--- PASS: chainsaw (0.00s)
+    --- PASS: chainsaw/dr-restore (149.05s)
+PASS
+Tests Summary...
+- Passed  tests 1
+- Failed  tests 0
+- Skipped tests 0
+Done.
+merge_junit: merged 1 report(s) -> /work/conformance/_artifacts/report.junit.xml (tests=1 failures=0 errors=0 skipped=0)
+[1m[run.sh][0m Done. JUnit: /work/conformance/_artifacts/report.junit.xml | Coverage: /work/conformance/_artifacts/coverage/coverage.md
@@ -0,0 +1,2 @@
+{"chainsaw_version": "v0.2.12", "env": "dev", "git_sha": "57d4df8c4f992732a49f3e2daddcace866778ab0", "junit_result": "passed", "kube_version": "v1.36.4+k3s1", "layer": "L3", "note": "run log OUTPUT carries every declared pass token (NODE_LOSS_VOLUME_AVAILABLE_OK) and no skip token [log scoped to this testcase; tokens read from real-output sections only]", "proof": "proven", "requirements": ["R-STATE-02"], "run_id": "20260901T235117Z-e9a4b66", "sentinel": "NODE_LOSS_VOLUME_AVAILABLE_OK", "test": "node-loss", "ts_utc": "2026-09-01T23:51:17Z"}
+{"chainsaw_version": "v0.2.12", "env": "dev", "git_sha": "fdc3265585f4b775c0a6ae3fb33c837b0c643655", "junit_result": "passed", "kube_version": "v1.36.4+k3s1", "layer": "L3", "note": "run log OUTPUT carries every declared pass token (OFF_CLUSTER_TARGET_OK, BACKUPS_ARE_SCHEDULED_OK, DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK) and no skip token [log scoped to this testcase; tokens read from real-output sections only]", "proof": "proven", "requirements": ["R-STATE-03"], "run_id": "20260902T001907Z-fdc3265", "sentinel": "DR_RESTORED_FROM_OFF_CLUSTER_BACKUP_OK", "test": "dr-restore", "ts_utc": "2026-09-02T00:19:07Z"}
@@ -0,0 +1,60 @@
+# =============================================================================
+# L0 STATIC — Flux postBuild substitution is complete and fail-closed-safe
+# Catalog: docs/14 L0 row ("Pre-apply, in CI") — runs WITHOUT a cluster.
+#
+# R-ENV-02 ("authored once, promoted dev -> prod") is implemented by ONE mechanism:
+# `postBuild.substituteFrom cluster-vars` injecting `${TOKEN}`s into the manifests each
+# Flux Kustomization renders. That mechanism FAILS OPEN — an undefined variable becomes
+# the empty string while the Kustomization still reports Ready — which emptied Cilium's
+# k8sServiceHost and broke the CNI on 2/3 dev nodes (DECISIONS-LOG 2026-09-01).
+#
+# GIVEN every Flux Kustomization under clusters/ that declares postBuild.substituteFrom,
+# WHEN  each `spec.path` is resolved to the exact file set it renders (following
+#       kustomization.yaml `resources:` transitively, not globbing the repo),
+# THEN  every `${...}` in those files is either DEFINED in clusters/base/cluster-vars.yaml
+#       or deliberately ESCAPED `$${...}`; no unescaped expansion carries a default
+#       operator on an undefined name (the silent-empty class strict mode does NOT catch);
+#       no unescaped expansion is unparseable by envsubst (which fails the WHOLE
+#       Kustomization); every path rendering a knob actually substitutes cluster-vars;
+#       every overlay-patched knob has a base default; and the check is wired into the
+#       merge gate as a blocking, unconditionally-run stage.
+#
+# This is the prerequisite proof for enabling kustomize-controller's
+# StrictPostBuildSubstitutions feature gate, and the permanent guard that keeps it safe.
+#
+# STATUS: EXECUTABLE. `check.sh` is a pure offline assertion script (standard library
+# only); conformance/run.sh --layer l0 and ci/l0.sh run it directly, and this Chainsaw
+# Test wraps the SAME script.
+#
+# NOT proven (named in check.sh's header): this is a STATIC scan of the SOURCE manifests
+# a path includes — a deliberate superset of the post-`kustomize build` stream. It does
+# not render, does not prove the feature gate is enabled on the live kustomize-controller,
+# and does not validate knob VALUES. R-GITOPS-01 is tagged for the narrow static slice
+# only: what git says a Kustomization renders is fully determined, with no variable
+# silently emptied on the way in. The live-state half is L2, untested today.
+# =============================================================================
+apiVersion: chainsaw.kyverno.io/v1alpha1
+kind: Test
+metadata:
+  name: flux-postbuild-substitution
+  labels:
+    conformance.home.k3s/R-ENV-02: "true"
+    conformance.home.k3s/R-GITOPS-01: "true"
+  annotations:
+    conformance.home.k3s/requirements: "R-ENV-02, R-GITOPS-01"
+    conformance.home.k3s/layer: "L0"
+    conformance.home.k3s/safety-critical: "false"
+    conformance.home.k3s/executable: "true"
+    conformance.home.k3s/intent: >-
+      Every variable a substituted Flux path renders is defined in cluster-vars or
+      escaped, so post-build substitution cannot silently empty a value and enabling
+      StrictPostBuildSubstitutions cannot fail a legitimate manifest.
+spec:
+  steps:
+    - name: audit-every-substituted-flux-path
+      description: >-
+        Resolve each postBuild.substituteFrom Kustomization to the files it renders and
+        assert every ${...} is defined or escaped, then assert the gate wires it blocking.
+      try:
+        - script:
+            content: bash ./check.sh
@@ -0,0 +1,369 @@
+#!/usr/bin/env bash
+# =============================================================================
+# L0 static check (offline, no cluster) — flux-postbuild-substitution
+# Serves: R-ENV-02 ("Same GitOps config promotes dev/test -> prod (authored once)."
+#                   — spec docs/02-environments-and-provisioning.md)
+#         R-GITOPS-01 ("All desired state in git, reconciled by Flux."
+#                   — spec docs/05-gitops-and-delivery.md)
+#
+# WHY THIS EXISTS — Flux post-build substitution FAILS OPEN
+# --------------------------------------------------------
+# R-ENV-02 is implemented by exactly one mechanism: `clusters/base/cluster-vars.yaml`
+# is injected into every `${TOKEN}` of the manifests each Flux Kustomization renders,
+# via `postBuild.substituteFrom`. That mechanism is silently lossy by default: an
+# UNDEFINED variable becomes the EMPTY STRING and the Kustomization still reports
+# Ready. On 2026-09-01 that emptied `k8sServiceHost` in the Cilium HelmRelease and put
+# cilium into Init:Error on 2 of 3 dev nodes (DECISIONS-LOG "substitution race that
+# fails OPEN"). "Authored once, promoted" is therefore only true while every token a
+# substituted path renders is either DEFINED or deliberately ESCAPED — and nothing in
+# the repo asserted that. This check does.
+#
+# ENVSUBST BEHAVIOUR ASSERTED HERE (empirically verified against the pinned toolchain,
+# `flux envsubst`, flux 2.4.0 — this is measured behaviour, not assumption):
+#   ${DEFINED}        -> substituted with the cluster-vars value.
+#   ${UNDEFINED}      -> EMPTY STRING, silently. `--strict` / the cluster-wide
+#                        StrictPostBuildSubstitutions feature gate turns this into a
+#                        loud Kustomization failure ("variable not set (strict mode)").
+#   ${UNDEFINED:-d}   -> the DEFAULT is applied AT RECONCILE TIME. Strict mode does
+#                        NOT catch this (it exempts default-operator forms by design),
+#                        so a shell guard written `[ -z "${X:-}" ]` inside a rendered
+#                        manifest is pre-resolved to `[ -z "" ]` and its else-branch
+#                        becomes unreachable in the container. Silent, and permanent.
+#   $${VAR}, $${V:-d}, $${ARR[0]}  -> emitted as the LITERAL ${...} for a downstream
+#                        shell/cloud-init consumer. Escaping is total: it neutralises
+#                        even the indexed form.
+#   $VAR, $(cmd)      -> left alone by envsubst; they need no escaping.
+#   ${...}, ${a b}, ${ARR[0]}  (UNESCAPED) -> HARD PARSE ERROR ("unable to parse
+#                        variable name" / "missing closing brace") which fails the
+#                        WHOLE Kustomization — every resource in the path, not just
+#                        the offending one.
+# The escape contract this enforces is the one already documented in
+# `clusters/base/apps-vms.yaml`; this check is that comment made executable.
+#
+# GIVEN the repository as authored,
+# WHEN  every Flux Kustomization under clusters/ that declares postBuild.substituteFrom
+#       is resolved to the exact file set its `spec.path` renders (by following
+#       kustomization.yaml `resources:` transitively — a path, not a glob),
+# THEN  (1) every `${...}` in those files is DEFINED in cluster-vars, or ESCAPED `$${...}`;
+#       (2) no UNESCAPED expansion carries a default/length/substitution operator on an
+#           undefined name (the silent-empty class strict mode does not catch);
+#       (3) no UNESCAPED expansion is unparseable by envsubst (`${...}`, `${ARR[0]}`) —
+#           that fails the entire Kustomization, so it is fatal wherever it appears;
+#       (4) every Kustomization that renders a cluster-vars token actually declares
+#           `substituteFrom` a ConfigMap named cluster-vars (else the literal token
+#           ships into the cluster);
+#       (5) every knob an overlay patches (`/data/KEY`) exists in the BASE ConfigMap —
+#           the "add the knob with a base default BEFORE referencing it" rule that the
+#           incident's interim discipline depends on;
+#   AND (6) this check is LOAD-BEARING: ci/l0.sh runs it on every gate run and
+#           ci/gate.sh sets the merge block when the l0 stage fails.
+# Assertion (1)-(3) are applied to COMMENTS as well as content: `kustomize build`
+# preserves body comments into the stream envsubst reads (verified: a `$`-carrying
+# comment survives into the built apps/wave-1 output), so a braced expression in a
+# comment is a live hazard, not prose.
+#
+# WHAT THIS DOES *NOT* PROVE (honest gaps — this is a STATIC check):
+#   - It does NOT render the manifests. It scans the SOURCE files a path includes,
+#     which is a deliberate SUPERSET of the post-`kustomize build` stream (kustomize
+#     drops some comments). A finding in a comment may not reach envsubst TODAY; it is
+#     still reported, because whether a given comment survives the build is a kustomize
+#     implementation detail that changes with the pinned version, and the failure it
+#     causes is total (assertion 3). The end-to-end proof — `kustomize build <path> |
+#     flux envsubst --strict` for every substituted path — needs kustomize + flux,
+#     which the L0 CI toolchain does not install (.gitea/workflows/scripts/install-tools.sh
+#     l0), so it cannot run here without permanently SKIPPING. It was run by hand and
+#     recorded in DECISIONS-LOG; this check is the reproducible static half.
+#   - It does NOT prove the cluster's live state matches git, nor that the
+#     StrictPostBuildSubstitutions feature gate is actually enabled on
+#     kustomize-controller. Both are cluster facts (L2), untested here. Tagging
+#     R-GITOPS-01 claims ONLY the static slice: what git says a Kustomization renders
+#     is fully determined, with no variable silently emptied on the way in.
+#   - It does NOT validate cluster-vars VALUES (that GATEWAY_VIP is inside the LB pool,
+#     that an overlay's LAN block is self-consistent). Presence, not correctness.
+#   - A cluster-vars key nothing references is reported as an ADVISORY, never a failure:
+#     several are deliberately reference-only and say so in cluster-vars.yaml
+#     (PIA_REGION "retained, not substituted"; CLUSTER_POD_CIDR "Documents ..."), so
+#     failing on them would be a false block on documented intent.
+# =============================================================================
+set -euo pipefail
+DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+ROOT="$(cd "${DIR}/../../../.." && pwd)"        # repo root
+PYTHON="${PYTHON:-python3}"
+
+# Honest SKIP (never green) if the thing under test is not present at all.
+if [ ! -d "${ROOT}/clusters" ] || [ ! -f "${ROOT}/clusters/base/cluster-vars.yaml" ]; then
+  echo "check SKIPPED: clusters/ or clusters/base/cluster-vars.yaml absent — nothing to audit" >&2
+  exit 3
+fi
+
+cd "${ROOT}"
+"${PYTHON}" - "${ROOT}" <<'PY'
+"""Static audit of Flux postBuild substitution safety. Pure standard library.
+
+No PyYAML: the file shapes parsed here are line-constrained and the parse contracts are
+documented at each parser, matching lib/coverage.py + lib/status.py. The kustomization
+`resources:` parser is IMPORTED from lib/status.py rather than forked, so there is one
+definition of "what a Flux path actually renders" in the harness.
+"""
+from __future__ import annotations
+
+import os
+import re
+import sys
+from pathlib import Path
+
+ROOT = Path(sys.argv[1])
+sys.dont_write_bytecode = True          # keep __pycache__ out of the tracked tree
+sys.path.insert(0, str(ROOT / "conformance" / "lib"))
+import status as st                     # noqa: E402 — reuse the walk, don't fork it
+
+FAILURES: list[str] = []
+ADVISORIES: list[str] = []
+CHECKS = 0
+
+
+def check(cond, msg):
+    global CHECKS
+    CHECKS += 1
+    if not cond:
+        FAILURES.append(msg)
+
+
+# ------------------------------------------------------------------ cluster-vars
+# Parse contract: `data:` block of a single ConfigMap, one `  KEY: "value"` per line
+# (every entry in clusters/base/cluster-vars.yaml is a quoted scalar; comments and
+# continuation-comment lines are indented further and never match).
+_DATA_KEY_RE = re.compile(r'^  ([A-Za-z_][A-Za-z0-9_]*):\s*(?:"|\')')
+
+
+def cluster_vars_keys(path: Path) -> set[str]:
+    keys: set[str] = set()
+    in_data = False
+    for raw in path.read_text().splitlines():
+        if re.match(r"^data:\s*$", raw):
+            in_data = True
+            continue
+        if not in_data:
+            continue
+        if st._TOP_KEY_RE.match(raw):   # a new top-level key ends the data block
+            break
+        m = _DATA_KEY_RE.match(raw)
+        if m:
+            keys.add(m.group(1))
+    return keys
+
+
+VARS_FILE = ROOT / "clusters" / "base" / "cluster-vars.yaml"
+KEYS = cluster_vars_keys(VARS_FILE)
+check(len(KEYS) > 0, f"no data keys parsed from {VARS_FILE} — the parser or the file shape changed")
+
+# ------------------------------------------- Flux Kustomizations with substituteFrom
+# Parse contract mirrors lib/status.py's flux_paths(): docs split on a lone `---`, a doc
+# is a Flux entrypoint only if it carries the kustomize.toolkit apiVersion AND
+# `kind: Kustomization` AND a spec-level `path:`. Inline `patch: |-` bodies in the
+# overlays carry Flux Kustomizations WITHOUT a path and are correctly skipped.
+_SUBFROM_RE = re.compile(r"^(\s*)substituteFrom:\s*$", re.M)
+_SUBITEM_KIND_RE = re.compile(r"^\s*-\s*kind:\s*(\S+)")
+_SUBITEM_NAME_RE = re.compile(r"^\s*(?:-\s*)?name:\s*([^\s#]+)")
+
+
+def substitute_sources(doc: str) -> list[tuple[str, str]]:
+    """[(kind, name)] declared under postBuild.substituteFrom in this doc."""
+    m = _SUBFROM_RE.search(doc)
+    if not m:
+        return []
+    indent = len(m.group(1))
+    out: list[tuple[str, str]] = []
+    kind = ""
+    for raw in doc[m.end():].splitlines():
+        if raw.strip() == "" or raw.lstrip().startswith("#"):
+            continue
+        if len(raw) - len(raw.lstrip()) <= indent and not raw.lstrip().startswith("-"):
+            break                                    # dedented out of the list
+        km = _SUBITEM_KIND_RE.match(raw)
+        if km:
+            kind = km.group(1)
+            continue
+        nm = _SUBITEM_NAME_RE.match(raw)
+        if nm and kind:
+            out.append((kind, nm.group(1)))
+            kind = ""
+    return out
+
+
+kustomizations: list[dict] = []
+for yfile in sorted((ROOT / "clusters").rglob("*.yaml")):
+    text = yfile.read_text()
+    if st.FLUX_API not in text:
+        continue
+    for doc in st._DOC_SPLIT_RE.split(text):
+        if st.FLUX_API not in doc or not re.search(r"^kind:\s*Kustomization\s*$", doc, re.M):
+            continue
+        pm = st._PATH_RE.search(doc)
+        if not pm:
+            continue
+        nm = st._NAME_RE.search(doc)
+        srcs = substitute_sources(doc)
+        if not srcs:
+            continue                                  # no substitution => nothing to audit
+        kustomizations.append({
+            "file": str(yfile.relative_to(ROOT)),
+            "name": nm.group(1) if nm else "?",
+            "path": pm.group(1),
+            "sources": srcs,
+        })
+
+check(len(kustomizations) > 0,
+      "no Flux Kustomization with postBuild.substituteFrom found under clusters/ — "
+      "the parser or the repo layout changed; this check would silently audit nothing")
+
+# ------------------------------------------------------------------ token scanning
+# One `$`-run followed by a braced expression. `[^{}]*` is exhaustive for this tree:
+# a repo-wide sweep found no nested/unclosed brace expression in any manifest (only
+# Gitea Actions `${{ ... }}` in .gitea/, which no Flux Kustomization renders).
+TOKEN_RE = re.compile(r"(\$+)\{([^{}]*)\}")
+NAME_RE = re.compile(r"^[A-Za-z_][A-Za-z0-9_]*$")
+# An expansion whose name is followed by a POSIX parameter operator. envsubst EVALUATES
+# these, so an undefined name yields the default/empty AT RECONCILE TIME.
+OP_RE = re.compile(r"^([A-Za-z_][A-Za-z0-9_]*)(:[-=?+].*|:[0-9].*|/.*|#.*|%.*|\^.*|,.*)$")
+LEN_RE = re.compile(r"^#([A-Za-z_][A-Za-z0-9_]*)$")
+
+
+def classify(dollars: int, inner: str) -> tuple[str, str] | None:
+    """Return (severity-tag, remediation) for a hazardous expansion, else None."""
+    if dollars >= 2:
+        return None                                   # escaped: emitted as a literal
+    if NAME_RE.match(inner):
+        if inner in KEYS:
+            return None                               # defined knob — the happy path
+        return ("UNDEFINED",
+                f"strict mode fails the Kustomization; today it renders EMPTY. Either add "
+                f"'{inner}' to clusters/base/cluster-vars.yaml with a base default, or "
+                f"escape it as $${{{inner}}} if it is meant for a shell/cloud-init consumer")
+    m = OP_RE.match(inner) or LEN_RE.match(inner)
+    if m:
+        base = m.group(1)
+        if base in KEYS:
+            return None                               # defined knob with an operator
+        return ("SILENT-EMPTY",
+                f"envsubst resolves this AT RECONCILE TIME because '{base}' is not a "
+                f"cluster-var, so the rendered manifest carries the default, not the "
+                f"expression. StrictPostBuildSubstitutions does NOT catch this form. "
+                f"Escape it as $${{{inner}}} if the CONTAINER's shell is meant to expand it")
+    return ("FATAL-PARSE",
+            "envsubst cannot parse this and fails the ENTIRE Kustomization (every resource "
+            "in the path). Escape it as $${...} or rewrite the prose without braces")
+
+
+def rendered_files(path_spec: str) -> tuple[list[str], bool]:
+    """Repo-relative files the Flux `spec.path` renders, resolving `resources:` transitively."""
+    rel = os.path.normpath(path_spec.lstrip("./")) if path_spec not in (".", "./") else "."
+    if not (ROOT / rel).is_dir():
+        return [], False
+    applied, _ = st.reconciled_files(ROOT, rel)
+    return sorted(applied), True
+
+
+findings: list[str] = []
+referenced: dict[str, set[str]] = {}
+inventory: list[str] = []
+
+for k in kustomizations:
+    files, exists = rendered_files(k["path"])
+    check(exists, f"{k['file']}: Kustomization '{k['name']}' renders path '{k['path']}' "
+                  f"which is not a directory in this repo")
+    has_cluster_vars = ("ConfigMap", "cluster-vars") in k["sources"]
+    n_def = n_esc = n_bad = 0
+    for rel in files:
+        f = ROOT / rel
+        try:
+            text = f.read_text()
+        except (OSError, UnicodeDecodeError):
+            continue
+        for lineno, line in enumerate(text.splitlines(), 1):
+            for m in TOKEN_RE.finditer(line):
+                dollars, inner = len(m.group(1)), m.group(2)
+                verdict = classify(dollars, inner)
+                if verdict is None:
+                    if dollars >= 2:
+                        n_esc += 1
+                    else:
+                        n_def += 1
+                        referenced.setdefault(re.split(r"[:/#%^,]", inner)[0] or inner,
+                                              set()).add(k["name"])
+                        # (4) a DEFINED knob is only substituted if this Kustomization
+                        #     actually pulls cluster-vars in; otherwise the literal ships.
+                        check(has_cluster_vars,
+                              f"{rel}:{lineno}: renders cluster-var ${{{inner}}} but "
+                              f"Kustomization '{k['name']}' ({k['file']}) does not "
+                              f"substituteFrom ConfigMap/cluster-vars — the literal token "
+                              f"would ship into the cluster")
+                    continue
+                n_bad += 1
+                tag, fix = verdict
+                findings.append(f"  [{tag}] {rel}:{lineno}  {m.group(0)}\n"
+                                f"        rendered by Flux Kustomization '{k['name']}' "
+                                f"({k['file']}, path {k['path']})\n"
+                                f"        {fix}\n"
+                                f"        | {line.strip()[:120]}")
+    inventory.append(f"  {k['name']:<16} path={k['path']:<22} files={len(files):<3} "
+                     f"defined={n_def:<3} escaped={n_esc:<3} hazards={n_bad}")
+
+check(not findings,
+      f"{len(findings)} unescaped, undefined or unparseable expansion(s) in substituted paths")
+
+# --------------------------------------------- (5) overlay knobs exist in the base
+# Parse contract: overlays patch cluster-vars with JSON6902 ops (`- op: replace` /
+# `path: /data/KEY`) inside an inline `patch: |-` block. The repo rule (cluster-vars.yaml
+# header) is that a knob is ADDED TO THE BASE with a default BEFORE any overlay or
+# manifest references it — that ordering is what closes the define-then-use race.
+_OP_PATH_RE = re.compile(r"^\s*(?:-\s*)?path:\s*/data/([A-Za-z_][A-Za-z0-9_]*)\s*$", re.M)
+for overlay in sorted((ROOT / "clusters").glob("*/kustomization.yaml")):
+    for key in set(_OP_PATH_RE.findall(overlay.read_text())):
+        check(key in KEYS,
+              f"{overlay.relative_to(ROOT)}: patches /data/{key} but '{key}' has no BASE "
+              f"default in clusters/base/cluster-vars.yaml — a second overlay would render "
+              f"${{{key}}} empty (R-ENV-02: author once, supply per env)")
+
+# ------------------------------------------------------- (6) the check is load-bearing
+L0 = (ROOT / "ci" / "l0.sh").read_text() if (ROOT / "ci" / "l0.sh").is_file() else ""
+GATE = (ROOT / "ci" / "gate.sh").read_text() if (ROOT / "ci" / "gate.sh").is_file() else ""
+check("flux-postbuild-substitution/check.sh" in L0,
+      "ci/l0.sh does not run flux-postbuild-substitution/check.sh — the requirement-scoped "
+      "conformance selection can filter this check out of a gate run, so l0.sh must invoke "
+      "it directly and unconditionally or the gate is not actually enforcing it")
+check(re.search(r"^for s in .*\bl0\b.*; do", GATE, re.M) and re.search(r"fail\).*BLOCK=1", GATE),
+      "ci/gate.sh does not set the merge block when the l0 stage fails")
+
+# ------------------------------------------------------------- advisory: dead knobs
+for key in sorted(KEYS - set(referenced)):
+    ADVISORIES.append(f"cluster-vars knob '{key}' is referenced by NO reconciled manifest "
+                      f"(dead knob, or documentation-only — advisory, not a failure)")
+
+# ------------------------------------------------------------------------- report
+print("Flux postBuild substitution inventory (per Kustomization):")
+for line in inventory:
+    print(line)
+print(f"\ncluster-vars knobs defined: {len(KEYS)}   referenced: {len(referenced)}")
+
+if ADVISORIES:
+    print("\nADVISORIES (not failures):")
+    for a in ADVISORIES:
+        print(f"  - {a}")
+
+if findings:
+    print("\nHAZARDS — unescaped expansions that are not cluster-vars knobs:", file=sys.stderr)
+    for f in findings:
+        print(f, file=sys.stderr)
+
+print()
+if not FAILURES:
+    print(f"check OK: flux-postbuild-substitution — {CHECKS} assertions "
+          f"(R-ENV-02, R-GITOPS-01)")
+    raise SystemExit(0)
+print(f"CHECK FAIL (flux-postbuild-substitution): {len(FAILURES)} failed, "
+      f"{CHECKS - len(FAILURES)} passed", file=sys.stderr)
+for f in FAILURES:
+    print(f"  FAIL {f}", file=sys.stderr)
+raise SystemExit(1)
+PY
@@ -25,20 +25,124 @@ Fill a row per node as it lands. Node 1 is as-found on 2026-08-31.
 |---|---|---|---|
 | Hostname | `k3s-prod-1` | `k3s-prod-2` | `k3s-prod-3` |
 | LAN IP | `192.168.2.10` | `192.168.2.11` | `192.168.2.12` |
-| Model | HP EliteDesk 800 G5 Desktop Mini | | |
-| CPU | i7-9700T, 8c/8t, VT-x | | |
-| RAM | 31 GiB | | |
-| Disks | 1× 477 GB SATA SSD (`C400-MTFDDAC512M`) | | |
-| OS | Debian 13 (trixie), kernel 6.12 | | |
-| Firmware | HP R21 Ver. 02.26.00 | | |
-| `/dev/kvm` | present | | |
+| Model | HP EliteDesk 800 G5 Desktop Mini | HP EliteDesk 800 G5 Desktop Mini | |
+| CPU | i7-9700T, 8c/8t, VT-x | i7-9700T, 8c/8t, VT-x | |
+| RAM | 31 GiB (2×16 GB Micron) | **2.6 GiB usable of 16 GB — see §0b** | |
+| Disks | 1× 477 GB SATA SSD (`C400-MTFDDAC512M`, ~2011) | 1× 477 GB **NVMe** (`PM9A1 Samsung`) | |
+| Drive health | 69% life, 15 grown bad blocks, 187 erase fails | **96% life**, 2142 h, PASSED | |
+| OS | Debian 13 (trixie), kernel 6.12 | Debian 13 (trixie), kernel 6.12 | |
+| Firmware | HP R21 Ver. 02.26.00 | HP R21 Ver. 02.26.00 | |
+| `/dev/kvm` | present | present | |
+| Serial | MXL1052NGN | MXL0073949 | |
+
+**The nodes are NOT hardware-symmetric.** Node 1 has a ~2011 SATA SSD with real wear; node 2 has a
+healthy modern NVMe. §2 requires an identical disk layout across all three because Longhorn replica
+placement assumes symmetry — so this is a live input to the disk decision, not a footnote. Node 2's
+NVMe is the drive node 1 should have had.

 Dev nodes for comparison: 8 vCPU / 24 GiB / Debian 13, **two** dedicated data disks (Longhorn + etcd).

 ---

+## 0b. OPEN HARDWARE FAULT — `k3s-prod-2` can only address ~2.6 GiB of its 16 GB
+
+Found 2026-09-01 by `playbooks/node-health.yml` on node 2's first health run. **Do not install
+more RAM until this is understood** — see the warning at the end.
+
+| Evidence | Reading |
+|---|---|
+| DMI (`dmidecode -t memory`) | **16 GB Samsung M471A2K43DB1-CTD in DIMM1 @ 2667 MT/s**, DIMM3 empty |
+| BIOS e820 map | reports ~16 GiB usable, incl. `0x100000000-0x42f7fffff` |
+| Kernel summary | `Memory: 2568544K/16546088K available (13958980K reserved)` |
+| `last_pfn` | revised **down** from `0x42f800` (~16.7 GiB) to `0xc3c10` (~3.06 GiB) in early boot |
+| Zones | `Normal` zone `present 3340288` pages (~12.7 GiB) but **`managed 0`** |
+| `MemTotal` | **2,753,284 kB ≈ 2.6 GiB** |
+| Memory blocks | 127 online, 128 MiB block size |
+
+**The DIMM is healthy.** It is present, correctly identified, and running at its rated speed. The
+kernel *sees* all 16 GB and then reserves 13.3 GiB of it. Everything below ~3 GiB is usable and
+everything above 4 GiB is present-but-unmanaged — the classic signature of **memory remapping
+above 4 GB not being applied**, not of failing memory.
+
+Node 1 is the control: **identical** HP EliteDesk 800 G5 Mini, **identical** BIOS R21 Ver. 02.26.00,
+identical i7-9700T — and it addresses its full 31 GiB. So this is not a firmware-version defect; it
+is per-machine state.
+
+**BIOS settings compared programmatically (2026-09-01).** Both nodes load the `hp-bioscfg`
+kernel driver, which exposes **215 BIOS attributes** read/write at
+`/sys/class/firmware-attributes/hp-bioscfg/attributes/<name>/current_value`. No BIOS passwords
+are set (`authentication/*/is_enabled` = 0).
+
+**They are READ-ONLY in practice, despite `current_value` having mode `rw`.** A write attempt was
+made on 2026-09-01 and the FIRMWARE refused it:
+`hp_bioscfg: Returned error 0x4, "Invalid command type"`, surfacing as `printf: I/O error`.
+HP requires BIOS-admin authentication for programmatic changes, and both credentials are absent
+— `Setup Password is_enabled=0` (role `bios-admin`) and `SPM key_mechanism=not provisioned`.
+Secure Boot is also enabled. So BIOS changes on these nodes are an **F10 exercise** unless a BIOS
+Setup Password is deliberately provisioned (see §1).
+
+What the comparison ruled OUT as the cause:
+- **Firmware inventory is correct.** Node 2's BIOS itself reports `Memory Size=16384 MB` and
+  `Processor 1 DIMM1=16 GB Samsung` / `DIMM3=Empty`. The firmware is not under-counting.
+- **No memory-remap / above-4G-decoding attribute exists** on this platform — not present on
+  either node, so it cannot be a mis-set option.
+- **MTRRs are effectively identical** between the nodes and there is **no MTRR trim warning**,
+  which rules out the classic "BIOS bug: MTRRs don't cover all of memory, losing N MB" path.
+- **`/proc/iomem` registers `100000000-42f7fffff` as `System RAM`** and 127 × 128 MiB memory
+  blocks report `online`. The memory reaches the kernel and is then reserved.
+
+Real BIOS differences found (node 1 = works, node 2 = broken):
+
+| Attribute | node 1 | node 2 |
+|---|---|---|
+| **After Power Loss** | Power On | **Power Off** ← violates §1 |
+| **Fast Boot** | Disable | **Enable** ← leading hypothesis |
+| Legacy Boot Options | Disable | Enable |
+| TPM Activation Policy | F1 to Boot | Allow user to reject |
+| Microsoft/Windows UEFI CA 2023 | Enable | Disable |
+| Memory Size | 32768 MB (2×16 GB Micron) | 16384 MB (1×16 GB Samsung) |
+
+**Leading hypothesis: `Fast Boot=Enable`.** HP Fast Boot reuses *cached memory-training data*
+rather than retraining at each boot. If the DIMM was fitted while Fast Boot was on, stale
+training data is a plausible route to memory being present, inventoried, handed over — and then
+reserved. It is also the one memory-relevant setting that differs from the working node. This is
+a hypothesis, not a conclusion: it was NOT tested, because changing it requires a firmware write
+and a reboot, which needs operator sanction.
+
+To investigate, cheapest first:
+- [ ] **Set `Fast Boot=Disable` and reboot** (tests the hypothesis directly, and matches node 1).
+      **Must be done in F10** — the firmware refuses programmatic writes (above).
+- [ ] **Set `After Power Loss=Power On`** regardless of the memory question — §1 requires it and
+      node 2 currently violates it.
+- [ ] Clear CMOS / load setup defaults on node 2 to force a full memory retrain, then re-check.
+- [ ] Reseat the DIMM; try it in DIMM3; try it in node 1 (swap test) — that isolates DIMM vs slot
+      vs board in one move.
+- [ ] `memtest86+` if the above do not resolve it.
+
+> ⚠ **Do not assume the incoming 32 GB fixes this.** If the fault is the slot, the board, or a BIOS
+> setting rather than the DIMM, 32 GB will present exactly the same way and the money is wasted.
+> **Verify `MemTotal` after any RAM change** — `playbooks/node-health.yml -e node_health_hosts=k3s_prod`
+> reports it. A node that can address 2.6 GiB cannot run k3s + Longhorn + a workload share.
+
 ## 1. Firmware / BIOS (per node, before OS install)

+> **These are MACHINE-CHECKABLE — but NOT machine-enforceable.** The `hp-bioscfg` driver exposes
+> 215 BIOS attributes at `/sys/class/firmware-attributes/hp-bioscfg/attributes/`, and **reads work
+> fine**: node 1 and node 2 were diffed programmatically, which is how the drift in §0b was found
+> at all. Nobody could have spotted `After Power Loss=Power Off` on node 2 by eye.
+>
+> **Writes are refused by the firmware** — verified 2026-09-01, `hp_bioscfg: Returned error 0x4,
+> "Invalid command type"`. HP requires BIOS-admin authentication and neither credential is
+> provisioned (`Setup Password is_enabled=0`, `SPM not provisioned`). Setting these therefore means
+> F10 on the box.
+>
+> **Follow-up worth doing: extend `roles/node_health` to ASSERT this checklist** — that is
+> achievable today with reads alone, and would have caught node 2's drift on its first health run.
+> Converging it automatically additionally requires provisioning a BIOS Setup Password on every
+> node, which is a real security decision (a stored credential that can rewrite firmware) and is
+> the operator's call, not a default.
+
+
 - [ ] **Virtualization enabled** — VT-x *and* VT-d. Required for KubeVirt (R-PLAT-03); verify after
      boot with `/dev/kvm` present and `grep -cE 'vmx|svm' /proc/cpuinfo` non-zero.
 - [ ] **AC power recovery = Power On.** A homelab node must return after a power cut without a
@@ -311,6 +415,32 @@ no extra vars is byte-for-byte the dev behaviour it always had (verified by a be
      own comment flags this as owed "when hardware is built."
 - [ ] **Dev overlay sets every new knob to today's exact value** so rendered dev output is
      byte-identical and the live cluster sees zero drift. Verify with `make -C ci render-golden`.
+- [ ] **`clusters/prod` is NOT bootstrappable as-is** — three gaps, found 2026-09-01 while landing
+      the `dependsOn` fix. Only the first is now closed:
+      - [x] **Root Kustomization** — `clusters/prod/sync.yaml` authored, mirroring dev. This became
+            *load-bearing*, not cosmetic: `clusters/base/platform.yaml` now carries
+            `dependsOn: [flux-system]`, so without a root object on prod, `platform` would block
+            forever on a dependency that does not exist and nothing downstream would reconcile.
+      - [x] **SOPS decryption** — DONE. Operator decision 2026-09-01: **prod uses the SAME age key
+            as dev**. Eight `decryption: {provider: sops, secretRef: sops-age}` patches mirror dev
+            exactly. The `sops-age` Secret is still created OUT OF BAND on the prod cluster
+            (`bootstrap/sops/install-age-key.sh`) — the overlay references it by name only.
+      - [~] **GitRepository source** — BRANCH settled, URL still blocked. Operator decision
+            2026-09-01: **prod tracks `main`, the same branch as dev**, because dev is temporary and
+            will be decommissioned once prod is stable. Recorded consequence: once prod is live,
+            **every merge to `main` reconciles BOTH clusters** — no promotion step, no soak window.
+            The URL is patched in but **cannot work on a cold prod cluster**, for two independent
+            reasons found 2026-09-01:
+            1. **Self-hosting circularity** — Gitea runs on the DEV cluster, the one slated for
+               decommission. Gitea must move to prod (or off-cluster) BEFORE dev is retired, or prod
+               loses its source of truth. **This is the decommission plan's first task, not its last.**
+            2. **Split-horizon sends it to the wrong place** — `coredns-custom` answers the entire
+               `home.keithjackson.dev` zone with `${GATEWAY_VIP}`, which on prod is `192.168.2.20`:
+               prod's OWN gateway, where no Gitea listens. Prod's Flux would resolve
+               `gitea.home.keithjackson.dev` to itself and never reach a repository.
+            Bring-up needs a TEMPORARY source (bootstrap host-Gitea, or an off-cluster mirror) and a
+            cutover once Gitea runs on prod — the same sequence `docs/05` describes for dev's own
+            Phase-6 cutover.
 - [ ] Confirm prod's backup target: dev's S3 (`versitygw` on the Proxmox host, `192.168.1.9`) is on
      the dev side of the network. Off-cluster backup is DR-critical (R-STATE-03).

@@ -87,11 +87,13 @@ proxmox ansible_host=192.168.2.102 ansible_port=22 ansible_user=root ansible_ssh
 k3s-prod-1 ansible_host=192.168.2.10 ansible_port=22 k3s_node_ip=192.168.2.10

 [k3s_prod_secondary]
-# Addresses for nodes 2/3 ARE decided (operator, 2026-08-31 — infra/PROD-PROVISIONING.md
-# §0), but the nodes themselves are NOT yet racked/imaged/reachable. Left commented so
-# no play can accidentally target a host that isn't there; uncomment each line only once
-# that node is actually on the bench and answering SSH.
-# k3s-prod-2 ansible_host=192.168.2.11 ansible_port=22 k3s_node_ip=192.168.2.11
+# Uncomment a node only once it is actually on the bench and answering SSH, so no play can
+# target a host that isn't there. k3s-prod-2 came online 2026-09-01 (imaged identically to
+# node 1: same HP EliteDesk 800 G5 Mini, same BIOS R21 02.26.00, same i7-9700T, same
+# partition layout) but with a SAMSUNG PM9A1 NVMe instead of node 1's 2011 SATA C400 — the
+# nodes are NOT hardware-symmetric, which matters for the §2 Longhorn/etcd disk decision.
+# node 3 remains commented until it is racked.
+k3s-prod-2 ansible_host=192.168.2.11 ansible_port=22 k3s_node_ip=192.168.2.11
 # k3s-prod-3 ansible_host=192.168.2.12 ansible_port=22 k3s_node_ip=192.168.2.12

 # Umbrella group group_vars/k3s_prod/ attaches to (mirrors dev's [k3s_servers:children]
@@ -42,5 +42,22 @@ cgroup:
    enabled: false
  hostRoot: /run/cilium/cgroupv2

+# Roll the cilium agent DaemonSet ONE node at a time. [parity] must match the
+# platform/cilium HelmRelease. The cilium 1.20.1 chart defaults this to 2, which on a
+# 3-node cluster lets one bad render take down two of three agents simultaneously —
+# exactly the 2026-09-01 incident, where k8sServiceHost: "" made the agent's `config`
+# init container fall back to the in-cluster ClusterIP 10.43.0.1:443. Only the Cilium
+# agent can translate that ClusterIP, and the agent in question was the one being
+# replaced: `dial tcp 10.43.0.1:443: i/o timeout`, deadlocked.
+# A CNI rollout has no healthy-peer fallback — the component being upgraded is the one
+# the upgrade needs to reach the API server. This bites hardest on a COLD BOOTSTRAP
+# (this role's job), where nothing healthy exists to recover from. With maxUnavailable: 1
+# the DaemonSet will not proceed past an unready pod, bounding damage to a single node.
+# Cost: Cilium upgrades serialise and take longer; at 3 nodes that is an acceptable trade.
+updateStrategy:
+  type: RollingUpdate
+  rollingUpdate:
+    maxUnavailable: 1
+
 operator:
  replicas: {{ cilium_operator_replicas }}
@@ -89,6 +89,27 @@ spec:
      autoMount:
        enabled: false
      hostRoot: /run/cilium/cgroupv2
+    # --- Agent rollout: ONE node at a time (blast-radius bound) — 2026-09-01 incident ---
+    # [parity] MUST equal Ansible: updateStrategy.rollingUpdate.maxUnavailable: 1.
+    # The chart's own default is 2 (cilium 1.20.1 values.yaml: updateStrategy.rollingUpdate.
+    # maxUnavailable: 2) — NOT a local choice, and on a 3-node cluster that lets a single bad
+    # Helm render take down two of three agents simultaneously. That is exactly what happened
+    # when a fails-open post-build substitution shipped k8sServiceHost: "": the agent's `config`
+    # init container fell back to the in-cluster ClusterIP 10.43.0.1:443, which only the Cilium
+    # agent itself can translate — and the agent translating it was the one being replaced.
+    # `dial tcp 10.43.0.1:443: i/o timeout`, deadlocked, on 2 of 3 nodes at once.
+    # A CNI rollout has no healthy-peer fallback: the thing being upgraded is the thing the
+    # upgrade needs in order to reach the API server. With maxUnavailable: 1 the DaemonSet
+    # will not proceed past an unready pod, so a bad render costs one node, not the cluster.
+    # This matters most on a COLD PROD BOOTSTRAP, where every knob is new at once and there is
+    # no already-healthy agent to recover from (see DECISIONS-LOG 2026-09-01 INCIDENT/RESEARCH).
+    # Cost, recorded: Cilium upgrades serialise and get slower. On 3 nodes that is minutes, and
+    # it buys a hard stop on the first bad node — the right trade here. Revisit if the cluster
+    # grows enough that serialised CNI upgrades become an operational problem.
+    updateStrategy:
+      type: RollingUpdate
+      rollingUpdate:
+        maxUnavailable: 1
    # NOTE (NON-parity): operator.replicas is deliberately omitted here. The Ansible dev render sets
    # replicas: 1 to save RAM, but defaults/main.yml declares it explicitly NOT a parity field
    # (Flux/prod may differ). Only the [parity] values above must match the bootstrap.
@@ -42,6 +42,16 @@ cgroup:
  autoMount:
    enabled: false
  hostRoot: /run/cilium/cgroupv2
+# [parity] roll the agent DaemonSet ONE node at a time. Overrides the cilium 1.20.1 chart
+# default of 2, which on 3 nodes lets a single bad render break 2/3 agents at once — as the
+# 2026-09-01 incident did (k8sServiceHost: "" → the `config` init container fell back to the
+# ClusterIP 10.43.0.1:443, translatable only by the very agent being replaced). A CNI upgrade
+# has no healthy-peer fallback, least of all on a cold prod bootstrap; maxUnavailable: 1 stops
+# the rollout at the first unready pod. Cost: serialised, slower upgrades (fine at 3 nodes).
+updateStrategy:
+  type: RollingUpdate
+  rollingUpdate:
+    maxUnavailable: 1
 # NON-parity (Flux/prod may differ; dev sets 1 to save RAM) — omitted from the HelmRelease:
 #   operator.replicas
 #
@@ -12,7 +12,15 @@ kind: Kustomization
 resources:
  # ---- Phase 2 — Platform Core: Network, Storage, TLS, DNS, Ingress ----
  - kyverno            # admission enforcer FIRST — policies present before other components reconcile
-  - cilium             # CNI (adopts the running Ansible-installed release; parity verified)
+  #      cilium (the CNI) is DELIBERATELY NOT here: it now reconciles in its OWN Flux Kustomization
+  #      (clusters/base/cilium.yaml, dependsOn flux-system, wait:true), and `platform` dependsOn IT.
+  #      Not the headlamp/oauth2-proxy rationale (a leaf that must not gate) but its mirror image:
+  #      the CNI is the one component that SHOULD gate everything, and inside this shared tier its
+  #      health was indistinguishable from eleven unrelated components, the only emergency valve was
+  #      freezing the whole tier, and the tier's 10m/5m interval/timeout are wrong for a 3-node
+  #      DaemonSet rollout. Gating is preserved via the explicit `platform.dependsOn: [cilium]` edge.
+  #      NOTE: platform/cilium/namespace.yaml is the ONLY declaration of Namespace/kube-system in
+  #      this tree — that is why the move required a prune-disabled transition. See DECISIONS-LOG.
  - longhorn           # replicated block storage / CSI
  - external-snapshotter  # CSI snapshot CRDs + snapshot-controller (VolumeSnapshot API; CDI smart-clone)
  - cert-manager       # Let's Encrypt DNS-01 wildcard — needs SOPS `cloudflare-api-token`
@@ -2,7 +2,7 @@
 # Longhorn — distributed replicated block storage across the 3 nodes (ADR-0003).
 # Serves R-STATE-01 (state survives destroy/rebuild) and R-STATE-02 (3-way replication).
 #
-# Dev-appropriate values. Environment differences enter ONLY via ${...} substitution from
+# Dev-appropriate values. Environment differences enter ONLY via $${...} substitution from
 # cluster-vars (R-ENV-02); everything else is identical base config for dev and prod.
 apiVersion: helm.toolkit.fluxcd.io/v2
 kind: HelmRelease
@@ -20,7 +20,7 @@ parameters:
  # (replicaSoftAntiAffinity=false) guarantees these land on distinct nodes, so any single node
  # loss keeps the volume available.
  # HARDCODED, not ${LONGHORN_DEFAULT_REPLICA_COUNT}: StorageClass.parameters is map[string]string,
-  # but kustomize strips the quotes around a bare "${VAR}" placeholder, so Flux postBuild substitution
+  # but kustomize strips the quotes around a bare "$${VAR}" placeholder, so Flux postBuild substitution
  # yields an unquoted numeric (3) that server-side apply rejects (int, not string). A quoted numeric
  # literal like "3"/"30" IS preserved by kustomize. The replica knob still drives the GLOBAL default
  # via defaultSettings.defaultReplicaCount in helmrelease.yaml (a Helm int value, unaffected).