bacb4c61eefef701a2592bac3420c86a7d835477
582
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  jakman85andClaude Opus 5
|
bacb4c61ee |
fix(cnpg): the alert told the on-call to run the command that lies
CNPGNoRecentBaseBackup's own remediation hint said `kubectl get backup`. On this cluster longhorn.io, postgresql.cnpg.io and velero.io each register kind Backup, so the bare short name resolves to Longhorn's empty set and prints 'No resources found' while CNPG backups exist. An on-call following the alert that fires BECAUSE backups look stale would have been told, with authority, that no backups exist at all — and might re-bootstrap a database over good ones. Fully qualify it. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
21491f901b |
fix(cnpg): scope DR alerts to the CLUSTER, not the pod — stop a permanent false positive
CNPGNoRecoverabilityPoint has been firing continuously on prod against six
pods — keycloak-db-1/-3, nextcloud-db-1/-3, semaphore-db-1/-3 — i.e. exactly
the REPLICAS of all three Clusters, while the databases themselves are fine:
every Cluster reports firstRecoverabilityPoint=2026-09-07T07:0x, a
lastSuccessfulBackup within the last few hours, ContinuousArchiving=True and
LastBackupSucceeded=True.
Root cause is aggregation scope, not archiving. `cnpg_collector_first_recoverability_point`
reads the backup CATALOGUE, which only the primary owns; a replica reports a
hard 0 for as long as it is a replica. The metric carries no cnpg.io/cluster
label (its label set on prod is container/endpoint/instance/job/namespace/pod),
so `max by (namespace, pod)` evaluated each replica as its own subject and an
`== 0` comparison then held forever. The rule went from correct to permanently
wrong the moment the Clusters went to `instances: 3`; nothing about the
expression changed.
WHY THIS IS WORSE THAN HAVING NO ALERT. An alert that is always firing has
zero information content: its value is identical in the healthy state and in
the failure state, so it cannot distinguish them. It is worse than silence in
two specific ways. First, it trains the operator to delete the notification on
sight, so the day a base backup genuinely stops the seventh identical email is
discarded with the other six — the alert actively MASKS the failure it was
written to catch, which for a DR alarm means discovering the loss at restore
time. Second, it is indistinguishable from a broken alert, so nobody can tell
whether the absence of new alerts means health or means the rule rotted. This
file exists because a real 38-hour archiving failure told nobody; a rule that
cries wolf about six healthy replicas rebuilds exactly the blindness it was
supposed to remove. This repo has been here before — see the permanently-firing
critical VPNTunnelDown post-mortem in platform/monitoring/alerts.yaml.
Fix: group by (namespace, job) and aggregate `pod` away. The CNPG operator
creates one PodMonitor per Cluster, named after the Cluster, in the Cluster's
namespace, so prometheus-operator derives job="<namespace>/<cluster>" —
keycloak/keycloak-db, nextcloud-db/nextcloud-db, semaphore-db/semaphore-db —
which identifies the CNPG Cluster uniquely. `job` rather than bare `namespace`
deliberately: namespace alone works today (one Cluster per namespace, verified
live) but would let two Clusters in one namespace mask each other, since the
healthy one's non-zero value would satisfy `max` for both. The alert now
states what its summary always claimed — this CLUSTER has no recoverability
point — and fires only when no instance of that Cluster reports one.
Proven live against prod Prometheus, read-only (promtool query instant):
OLD max by (namespace, pod) (...) == 0 -> 6 series, and 6 ALERTS firing
NEW max by (namespace, job) (...) == 0 -> empty
The new expression is not vacuous: forcing the metric to 0 for one cluster's
primary only yields exactly one series, {job="keycloak/keycloak-db"}, so a
genuine single-cluster loss of DR still alerts, per cluster. `promtool check
rules` passes on all 5 rules.
CNPGNoRecentBaseBackup carried the same defect and is fixed the same way.
`cnpg_collector_last_available_backup_timestamp` is also primary-only: on prod
the primaries read 3.1h/2.1h/0.1h old while all six replicas read 0, i.e.
time()-0 = ~56.7 YEARS. It was not firing only because the `> 0` guard was
load-bearing — a single clause was all that stood between this rule and six
more permanent false positives, too thin a margin for a DR alarm. Aggregating
`pod` away removes the dependence: `max` takes the primary's timestamp as the
cluster's answer, and the guard now means "this cluster has had at least one
backup". Verdict unchanged live (old empty, new empty).
The other three rules were audited and deliberately left on `by (namespace, pod)`:
* CNPGWALArchiveBacklog — every instance reports archive_status and the shape
is `> 0`, so a replica at 0 never fires and no pod can mask another; `pod`
names the instance whose archiver is stuck.
* CNPGWALVolumeNotRecycling — per-pod is REQUIRED, not merely safe:
aggregating it away would compare one instance's WAL count against
another's max_wal_size.
* CNPGMetricsCollectorErroring — unchanged in meaning AND grouping. Its
grouping is already correct: cnpg_last_error is genuinely per-instance, and
prod proves it discriminates rather than tracking role — all three
nextcloud-db pods report 1 while all six keycloak/semaphore pods report 0.
It is a true positive (the nextcloud 42501 CONNECT grant) owned by separate
work; nothing here silences or rescopes it.
The general rule, recorded in the file: `== 0`/staleness shapes must aggregate
`pod` away or every structurally-silent pod fires forever; `> 0` shapes are
safe per-pod and keep the instance name.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
ebce6dfabb |
docs: the Flux->Gitea allowance is rendered and Flux-adopted — debt closed
Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85
|
eda4a9f674 | merge: the Flux->Gitea allowance is rendered, not hand-applied | ||
|
jakman85andClaude Opus 5
|
d617983e83 |
feat(gitea): render gitea-allow-flux-ingress — prod's GitOps source, in git at last
The CNP that lets flux-system's source-controller clone from the in-cluster Gitea Service was APPLIED LIVE on prod on 2026-09-13 and existed nowhere in this repo. It carried a provenance annotation saying so. Until now it could not be authored: the gitea CNPs are GENERATED from the catalog entry, and the contract had no field for "also admit this in-cluster client" (fixed in the previous commit). Why it matters more than a missing allow normally would. prod's GitRepository points at the Service, not a public name (clusters/prod/kustomization.yaml: `url: http://gitea.gitea.svc.cluster.local:3000/Home-Network/home-network-k3s-impl.git`), deliberately, so prod's GitOps depends on neither public DNS, Cloudflare, prod's own Gateway nor ${BASE_DOMAIN}. But gitea-allow-gateway-ingress admits only `fromEntities: [ingress]`, so source-controller's clone was dropped — and the HTTPRoute that would have served the post-apex-flip public name instead lives in a DOWNSTREAM tier that cannot apply while the source is down. Source down -> routes never rename -> source stays down. Every `kubectl delete cnp` and every cluster rebuild re-armed that deadlock, and it would have been extremely hard to diagnose cold. The rendered object is EQUIVALENT to the live one — same apiVersion/kind, same name/namespace/labels, and a byte-identical spec (endpointSelector app.kubernetes.io/name=gitea; fromEndpoints matchLabels k8s:io.kubernetes.pod.namespace=flux-system; toPorts 3000/TCP), verified against `kubectl --context k3s-prod -n gitea get cnp gitea-allow-flux-ingress -o json`. The name matches, so Flux ADOPTS the live object in place: no spec change, so no policy recompute and no flap on prod's own source. The only difference is that the rendered object carries no `homelab.keithjackson.dev/provenance` annotation — the reasoning now lives where the object is authored, in catalog/gitea.yaml, next to the field that generates it. Golden re-rendered with the canonical command; the whole apps/ diff is the one new document. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
1f20506829 |
feat(renderer): inClusterClients — authorable direct east-west ingress (schema 1.5.0)
A platform controller that dials a service's ClusterIP directly had NO authorable
form in the ServiceDefinition contract:
* ingressRoutes renders the north-south allow only — gateway-ingress admits
`fromEntities: [ingress]`, the Gateway's Envoy identity, and nothing else;
* dependencies compiles edges only BETWEEN CATALOG SERVICES, from the source
entry's own declaration.
Under the default-deny baseline (R-NET-01) such a client is therefore DROPPED, and
the only way to unblock it was a live `kubectl apply` of a hand-written CNP — a
cluster object outside git, one `kubectl delete` or one rebuild from coming back.
`inClusterClients: [{namespace, port, protocol?, name?}]` closes that. Each entry
renders ONE least-privilege ingress CiliumNetworkPolicy: this service's
endpointSelector, `fromEndpoints` matching ONLY `k8s:io.kubernetes.pod.namespace`,
`toPorts` carrying ONLY the declared port/protocol — never `fromEntities: all`.
Additive: the namespace default-deny keeps denying everything undeclared (R-NET-02),
and the entry is NOT a dependency edge, so it creates no wave ordering.
Shape notes:
* selected by NAMESPACE, not pod labels: an upstream controller's labels belong to
its chart, not to this platform's contract. The cost is explicit — every pod in
that namespace is admitted on that port, so the field is for platform-controller
namespaces (flux-system, monitoring), never a shared one. The schema description
says so.
* optional `name` (default: the namespace) only names the rendered policy,
`<service>-allow-<name>-ingress`. That name is operator-facing (kubectl get cnp,
a Hubble drop), and pinning it lets an allowance that already had to be applied
live be authored under its EXISTING name, so Flux adopts the live object in place
instead of creating a near-duplicate and leaving the original unmanaged.
* one field, not a policy DSL: no arbitrary selectors, entities or CIDRs.
Covered by render.py --selftest (4c): name/namespace/selector/port shape, no
fromEntities widening, default-deny still `ingress: []`, the gateway allow not
displaced, `name` defaulting to the namespace, and nothing rendered when the field is
absent. No golden changes here — no catalog entry uses the field yet.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
a863542bf7 |
docs: record the apex migration, the GitOps deadlock, and the live-only policy
Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
f252ecec25 |
fix(gitops): prod's source is the in-cluster Service, not a public name
The apex flip deadlocked prod's GitOps and this is the durable fix. The GitRepository pointed at a public hostname. The flip renamed prod's HTTPRoute hostnames, so that name stopped serving — but the HTTPRoute that would serve the new name lives in a DOWNSTREAM tier which cannot reconcile while the source is broken. Source down -> routes never rename -> source stays down. Observed live: srcReady=False, "unable to list remote for https://gitea.home.keithjackson.dev". Pointing at gitea.gitea.svc.cluster.local:3000 removes the cycle permanently: prod's GitOps no longer depends on public DNS, Cloudflare, its own Gateway, or ${BASE_DOMAIN}. No future domain change can sever prod from its own source. Plain http is deliberate: cluster-internal traffic to a ClusterIP, TLS terminates at the Gateway for external clients, the GitRepository has no secretRef (anonymous clone), and all secrets are SOPS-encrypted at rest regardless of transport. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
ae37e27f14 |
fix(gitops): move prod's own Git source with the apex flip
The GitRepository url is a hardcoded literal, not templated on ${BASE_DOMAIN}, so
the apex flip did not carry it. But the flip renames prod's HTTPRoute hostnames, so
external-dns (policy=sync) deletes gitea.prod.home.keithjackson.dev and CoreDNS's
split-horizon zone moves from prod.home. to home. — which would have severed prod
from its OWN GitOps source moments after the flip reconciled.
Landed in the same push as the flip deliberately: prod has not yet fetched
|
||
|
jakman85andClaude Opus 5
|
9161cab9cd |
feat(dns): prod takes the apex — home.keithjackson.dev
Dev is decommissioned and has released the name. Prerequisites completed and
verified BEFORE this flip:
1. dev's 18 A records released by its own external-dns (policy=sync; sources
deleted after suspending dev's Flux so they could not be recreated).
2. dev's 18 LEGACY UNPREFIXED TXT registry entries deleted from Cloudflare by
hand. external-dns v0.21.0 deleted only the `a-` prefixed form and then logged
"All records are already up to date" — it would NEVER have cleared the older
unprefixed format it no longer writes but still READS for compatibility. They
carried `owner=default`; prod runs `owner=prod`, so prod could not have
claimed these names while they existed. This was the real blocker, and it was
invisible until measured.
3. dev's `*.home.keithjackson.dev` + apex Certificate deleted so it stops
renewing. Issued ~18d ago, so prod's request is #1 this week against LE's
duplicate limit (5 per identical name set per week).
Verified at the AUTHORITY (betty.ns.cloudflare.com), not via a resolver: 1.1.1.1
served stale TXT for minutes after deletion and would have shown a false failure.
UNCHANGED, deliberately: EXTERNALDNS_TXT_OWNER_ID stays `prod` — giving prod
`default` would let it adopt and sync-delete records it does not own, which is the
2026-09-04 incident. EXTERNALDNS_DOMAIN_FILTER stays the ZONE `keithjackson.dev`:
finding F-DNS1 proved a strict subdomain filter drops the hosted zone and external-dns
then publishes NOTHING.
The zone has wildcards `*.keithjackson.dev` and `*.home.keithjackson.dev` pointing at
the public IP (legacy non-k3s prod). Dev's specific records were shadowing the latter;
prod's new specific records shadow it again. The legacy stack lives on
`*.keithjackson.dev` and is untouched.
k3s_base_domain moves with it to hold the [parity] contract, but that value renders
the apiserver's install-time oidc-issuer-url: it does NOT take effect until the
k3s_server role re-renders config.yaml and k3s is restarted serial: 1. Until then the
apiserver trusts the OLD issuer while Keycloak serves the NEW one, so kubectl OIDC
fails in that window. Cert-based kubeconfigs are unaffected.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85
|
b9c0970232 | merge: Keycloak client URLs reconcile, not just secrets | ||
|
jakman85andClaude Opus 5
|
f7d4648851 |
docs(keycloak): record the URL-reconciliation decisions
Records K1-K9: extend-vs-sibling and why, the generated+gated desired state, verbatim token pass-through, per-pass fail-closed, order-insensitivity, unmanaged-means-untouched, public clients' URLs managed, one alert pair not two, and the mutation harness. Also records a process note: my first pass reported three false findings (reconciler absent from main, import not templated, BASE_DOMAIN dead) because I diffed against origin/main -- origin is dev's Gitea, stale at |
||
|
jakman85andClaude Opus 5
|
6202d92c27 |
test(conformance): gate the URL desired state, and prove the selftest can fail
L0 (212 assertions, was 175):
* runs ci/render-keycloak-client-urls.py --check, so client-urls.yaml must be exactly
what the realm import renders. A hand edit that makes the two disagree is
unmergeable -- this is what keeps the realm import the single source of truth for
hostnames rather than just the place they were first typed.
* asserts client-urls.yaml and the realm import are rendered by the SAME Flux
Kustomization. postBuild.substituteFrom is per-Kustomization, so a split would let
one ${BASE_DOMAIN} resolve to two different values and the realm would converge on
a hostname the HTTPRoutes do not serve.
* asserts the desired state uses no substitution token the realm definition lacks,
names only clients the import declares, and declares no field outside the
five-field write surface; that the CronJob mounts it readOnly at the path the
script defaults to; and that the script, renderer and check agree on which fields
are writable.
* NEW mutations.py: injects 12 plausible regressions into the EXTRACTED script and
requires --selftest to catch every one. A passing suite proves nothing if it cannot
fail, and "reported success while the realm was broken" is precisely what this
component exists to end -- so the same standard applies to its own test. ~20s.
L2: the audit Job now mounts keycloak-client-urls and asserts
KEYCLOAK_CLIENT_URLS_AUDIT_OK. Without that it would pass on a realm still holding
pre-migration redirect URIs -- the exact state prod was measured in.
Alerts: the existing Failing/Stale pair is EXTENDED to name redirect-URI drift, not
duplicated. One CronJob gets one pair; a second pair on the same job_name regex would
fire twice for one cause. No new critical, no new permanently-firing rule.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
23ea72d01e |
feat(keycloak): reconcile client redirect URIs, not just client secrets
The realm import is a one-shot that never re-runs, so a redirect URI changed in git reaches the realm never. Prod's stored URIs were measured still on the pre-migration hostname while git declared the new one -- after a BASE_DOMAIN flip every OIDC login fails with a redirect_uri mismatch, with the CR still reading Done=True and nothing alerting. Same failure class as the literal-placeholder secrets, same cure. EXTENDS the existing reconciler rather than adding a sibling. Decisive reason: a URL write needs NO new endpoint. It is the same minimal client PUT, and the current URLs already come back in the allow-listed client lookup -- so the allow-list is widened by nothing and the users/groups/roles/authentication guarantee is preserved unchanged rather than re-declared in a second copy. The ConfigMap also carries exactly one script key by L0 contract, so a sibling would have had to fork ~300 lines of safety-critical code that the header explicitly forbids forking. Reconciles redirectUris, webOrigins, rootUrl, baseUrl, adminUrl -- only the fields a client actually declares, and on a write only the fields that actually drifted. A field the desired state omits is UNMANAGED and left untouched; absence never means force-to-empty. THE TWO PASSES ARE INDEPENDENT. Each reads its own desired state and fails closed for its own fields only. A malformed URL ConfigMap cannot stop client-SECRET repair, which would otherwise make credential healing depend on a hostname file. List fields compare order-insensitively (sorted, not set -- duplicates are still drift), because Keycloak does not preserve the authored order of redirectUris and an order-sensitive compare would rewrite every client forever while reporting success. --selftest grows to 84 assertions covering the domain flip, a client gaining a URI, a client losing a stale one, a public client's URLs being managed while its secret is not, per-pass fail-closed, order-insensitivity, and a server that accepts a PUT without applying it. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
51d8676f90 |
feat(keycloak): render the client-URL desired state from the realm import
The realm import is a one-shot: once Done=True it never re-runs, so a redirect URI
changed in git never reaches the realm. Healing that needs a DESIRED STATE the
reconciler can read -- and the reconciler pod has no Kubernetes API access at all
(automountServiceAccountToken: false), so it cannot read the KeycloakRealmImport CR.
Its desired state must be mounted, hence a ConfigMap.
A hand-authored ConfigMap would be a second source of truth for every public
hostname in the realm, free to disagree with the import -- the same shape as the bug
being closed. So it is GENERATED from the import and the render is gated, the same
render==golden idiom catalog/render.py already uses for apps/.
URL strings are copied VERBATIM: a ${BASE_DOMAIN} token in the source appears
unchanged here, and both files are rendered by the SAME Flux Kustomization
(./platform-config), so both are substituted in one pass with one value. The
renderer never parses a hostname and never reads cluster-vars, so there is no
second place the domain can be decided.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
fa4deac877 |
fix(conformance): the dirty-tree assertion must judge HONOURED evidence
One historical `-dirty` row reddened this gate permanently, even after a clean re-run of the same test. status.py already resolves duplicates latest-wins (latest_by_test), so a superseded row is not evidence of anything — but this check iterated every row, so the poisoned row from the git_sha bug (fixed in the parent commit) would have failed the audit forever. The dirty-tree assertion is now scoped to rows status.py would actually honour, by importing latest_by_test rather than reimplementing the rule, so the two cannot disagree about which rows are live claims. Structural assertions — provenance keys, sentinel, test-still-exists — still apply to EVERY row. Nothing is erased: the row stays in the ledger and runs/20260913T014437Z-19fc8bc/ run.log stays committed. It simply stops being read as a live claim. Verified the guard is intact afterwards — the check still REFUSES both forgeries it is built to catch (a self-skip presented as a pass, and a proven row from the root commit). A dirty-then-clean sequence is also the normal shape of noticing a dirty tree, fixing it, and re-running; that should not permanently fail an audit. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85
|
a317493bca | merge: R-NET-06 re-proven on prod (recovery in <=3s) | ||
|
jakman85andClaude Opus 5
|
c66a7e29e9 |
fix(conformance): the harness contradicted itself in two places
1. auditability-proofs-producible rejected any proven ledger row without a sentinel, with no layer exemption — while record_run.py DELIBERATELY records L0/L1 rows sentinel-less via its own SENTINEL_EXEMPT_LAYERS, because run_l1_offline.py renders skips as JUnit <skipped/> and those layers have no pass token to attribute. So ANY `--record` run touching L0 or L1 wrote a row this gate then rejected. Consequence: a requirement whose verifier set includes an L1 check could never be both PROVEN and L0-green — R-NET-06 is exactly such a requirement, and hit it the moment it was re-proven on prod. The check now honours the same constant instead of restating the policy, so the two halves cannot drift apart again. 2. git_sha() marked the tree dirty from tracked files, but conformance/runs/ ledger.jsonl IS tracked — so the FIRST `--record` run of a session dirtied the tree and every LATER run was stamped `-dirty`, which check.sh then refuses to honour. Recording one test poisoned the next, and that cost a second live fault-injection run against prod to work around. Its docstring already stated the intent for the untracked runs/<id>/ half of the same artifact; the ledger is the tracked half. Now excluded via pathspec, mirroring status.py's IMPL_EXCLUDE_PREFIXES which already lists this path for the same reason. Neither change weakens an assertion: (1) applies an exemption that already existed and was already documented, (2) stops the recorder invalidating its own output. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
155df8ee3f |
test(conformance): R-NET-06 PROVEN on prod — vpn-killswitch re-run from a clean tree
Supersedes the -dirty row from the previous commit by the ledger's own
append-only / latest-wins convention (lib/status.py latest_by_test): nothing
is rewritten, a newer row simply outranks the older one.
runs/20260913T014923Z-9d0814a vpn-killswitch (L3) proven env=prod
git_sha 9d0814ae... (CLEAN — resolvable, so the freshness check passes)
Fault injection against LIVE prod, gateway k3s-prod-3. Timeline (UTC):
01:49:27 tunnel-stop Job applied
01:49:31 Job succeeded — host vpn-egress-tunnel STOPPED, tun0 gone
01:49:31..01:51:01 vpn-class blackholed for 8 consecutive polls, NO response
of any kind; internet-class unaffected on the WAN
01:51:02 self-healing finally: tunnel-restart Job
01:51:05 kubectl wait confirms the host brought the unit back
01:51:04 egress-uplink label AND the BPF egress map both move 134 -> 139
(measured independently, out of band, during the run)
01:51:08 vpn-class egress back on PIA 158.173.241.11
RECOVERY WAS UNAIDED and took ~3s from tunnel-up to a re-steered datapath —
far inside the ~2-minute convergence timer, so the EVENT-DRIVEN up-script
path did the work, not the timer backstop. This is the half that was
previously unprovable: before the egress-uplink label, Cilium held the stale
ifindex and vpn-class egress never came back.
WHAT THE NO-LEAK ASSERTION DOES AND DOES NOT PROVE: it proves vpn-class
fails CLOSED (zero packets out, never the WAN IP). It does NOT credit the
host nftables backstop, which provably cannot fire for pod traffic —
bpf_redirect() skips netfilter. Stopping the tunnel removes tun0 and Cilium
drops on its own because the cached egress ifindex is unusable. Fail-closed
is real; the mechanism is Cilium's drop, as the test header now says.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
9d0814ae61 |
test(conformance): R-NET-06 run against prod — L1 proven, L3 pass recorded -dirty
Two recorded runs against PROD (CONF_ENV=prod, context k3s-prod): 20260913T014321Z-19fc8bc egress-class-render (L1) proven 20260913T014437Z-19fc8bc vpn-killswitch (L3) proven, but git_sha -dirty The L3 run PASSED for real on prod — every declared sentinel present (NS_PRIVILEGED_OK, TUNNEL_HEALTHY_OK, NO_LEAK_OK, INTERNET_UNAFFECTED_OK, TUNNEL_SELF_HEAL_OK, TUNNEL_RECOVERED_OK), tunnel stopped 01:44:48Z and recovered unaided by 01:46:25Z. Its row is nevertheless NOT usable as proof: git_sha carries `-dirty`, so status.py's ancestry check cannot resolve it and the row degrades to stale-proof. Cause is a harness flaw, not the cluster: lib/record_run.py's git_sha() ignores UNTRACKED files (so a run's own runs/<id>/ does not mark it dirty) but conformance/runs/ledger.jsonl is TRACKED — so the FIRST --record run of a session appends a row, dirties the tree, and every SUBSEQUENT --record run in that same session is stamped -dirty. Recording one test poisons the proof of the next. Committed as-is rather than rewritten: the ledger is append-only and this is honest evidence of a real run. A clean re-run follows and supersedes it by latest-wins (lib/status.py latest_by_test). Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85
|
19fc8bcb27 | merge: VPN egress gateway on prod, plus three datapath fixes | ||
|
jakman85andClaude Opus 5
|
53e09a2610 |
docs(vpn): dev recovered the minute prod left the shared PIA server
Closes the loop on the collision entry with the recovery evidence rather than leaving it as an open question for the operator: dev's last Inactivity timeout is 23:05:06 UTC — the minute prod switched to .135 — and at 23:12:03 that same session was still the live one, seven minutes unbroken against a two-minute cycle, 4/4 ping replies at 146 ms, 0% loss, and vpn-class pod egress back to 158.173.241.36 on three consecutive probes. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85
|
9b97e073e2 | merge: main (velero R2 + arr config PVC) into feat/vpn-egress-prod | ||
|
jakman85andClaude Opus 5
|
38e4bf1459 |
docs(vpn): record the PIA server collision, and the accidental proof it handed us
The stand-up broke dev, so the "one gateway per PIA server" rule and the measurement behind it are now written down where the next person will look: platform/vpn-egress/README.md and the session's DECISIONS-LOG entry. Both carry the verbatim journal lines — same server, same pushed `ifconfig 10.72.192.7` on both gateways — and the flap timestamps, because "same account, inside the connection limit" is true and is exactly what makes this non-obvious. Also corrected: the dev/prod table now shows the two environments on different servers with different exit IPs (dev 158.173.241.36, prod 158.173.241.11), and the open item about them sharing one public IP is replaced with the real remaining decision — whether prod gets its own PIA account, which would remove the hand-maintained per-environment server value entirely. The unplanned bonus, recorded in both places: moving prod to .135 gave it a genuinely NEW tunnel address on a real reconnect (10.72.192.7 ifindex 128 -> 10.150.192.86 ifindex 129) — the precise case Cilium does not follow and the one defect 1 was about. The egress-uplink label moved on its own, Cilium re-resolved, and all four vpn-class workloads kept egressing with no manual step. Better evidence than the synthetic address swap used to characterise it, and it cost nothing to capture. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
37a6c94168 |
fix(vpn): two gateways on one pinned PIA server evict each other every 2 minutes
Standing up prod broke dev, and the mechanism is worth spelling out because
"same PIA account, well inside its connection limit" is true and still not enough.
The vaulted .ovpn pins ONE server. With both gateways using it, dev and prod
landed on the SAME server AND were handed the SAME tunnel address — both journals
read `[Server-10779-2a] Peer Connection Initiated with [AF_INET]158.173.241.112:1198`
and `ifconfig 10.72.192.7 255.255.192.0`. Each reconnect steals that address on
that server; the loser then receives nothing, trips `--ping-restart` after 60s,
reconnects and steals it back. Measured cycle: dev restarting at 22:57:05,
22:59:03, 23:01:05 UTC with prod interleaved about a minute off, each ~2 minutes
apart, indefinitely. Neither environment had reliable vpn-class egress — prod's
probes looked green only because they happened to land inside an up-window.
Fix: `vpn_egress_gateway_pia_remote` ("<host> <port>", empty = honour the .ovpn)
rewrites just the `remote` line of the deployed .ovpn, and prod's group_vars sets
it to 158.173.241.135. That is another member of the same PIA Stockholm LB pool —
`sweden.privacy.network` resolved from k3s-prod-3 to
158.173.241.{34,55,112,135,239} — and every server in the pool takes the same
credentials and the same inline CA, so only the address differs. Dev keeps the
.ovpn's .112 untouched, which is why the override is per-group rather than in the
role or a second vaulted .ovpn.
Two details that matter for whoever touches this next:
* The regex is anchored to a line STARTING with `remote` plus whitespace, so
`remote-cert-tls` and `remote-random` are not collateral damage. The task keeps
`no_log: true` — the transformation never widens what is logged.
* A PIA server address is NOT a credential, so it lives in
group_vars/vpn_egress_gateway_prod/vars.yml in the clear, next to the vault
rather than inside it. Keeping it out of the vault is what makes it reviewable.
If prod ever gets its own PIA account, this override can be deleted again.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
04606d48b2 |
docs(vpn): stop crediting the nftables kill-switch for a drop it never makes
Four places in the tree told the reader that the host nftables table is the authoritative fail-closed backstop for egress-class=vpn pods: platform/vpn-egress README, egress-steering.yaml, the role README, and the vpn-killswitch test's own GIVEN/THEN prose. It is not, and cannot be — Cilium's eBPF egress-gateway datapath bpf_redirect()s those skbs to the egress device without invoking netfilter POSTROUTING. Corrected with the measurement in each place rather than softened, because a guard the repo trusts and that does not fire is worse than no guard. What replaces the claim, everywhere: vpn-class fails closed because CILIUM drops the traffic when it cannot use its cached egress interface, verified by tcpdump on both the WAN and tun0 during a tunnel stop and a tunnel restart (0 packets out either). The nft table keeps a narrower, now-proven job: node-originated traffic sourced from a tunnel address (killswitch_drop moved 0 -> 3 packets on k3s-prod-3 when such a packet was routed at the WAN). Also recorded: * egress-steering.yaml — `interface: tun0` is resolved ONCE and cached, and the gateway node is what tells Cilium it changed (the egress-uplink node label). A future reader's instinct will be to have the node write to that object; the comment says not to, because it is Flux-managed, and points at the label and `cilium-dbg bpf egress list` as the debugging entry points instead. * egress-steering.yaml — why the new NFS media mounts are not affected by pod-scoped steering: an NFS PV is mounted by the node kernel in the host netns, so podSelector never matches it. The 192.168.0.0/16 exclusion covers the server too, but that is the second reason, not the first. * vpn-killswitch test — its recovery step depends on the re-steer path, and could not have passed before it existed. Its no-leak assertion was always right; only the explanation was wrong. Also states the prerequisite plainly: the test cannot run at all without a labelled gateway node. * platform README — prod is live on k3s-prod-3 with the before/after egress IPs, and the note that prod's vpn-class pods had NO internet beforehand (CEGP with no matching node -> `Gateway IP: Not Found` -> dropped), so arming the gateway restored egress rather than moving it off the WAN. * role README — the standing "add the shared fwmark to the interface contract" escalation is closed as not implementable on Cilium OSS, rather than left open for someone to attempt. DECISIONS-LOG carries the full session entry, including the drafted ADR-0015 / docs-03 amendment for the architect (specs are immutable to agents) and the five things left for the operator — chief among them that a silent gateway outage still has no alert, which is what let the dev gateway sit dead for 80 minutes. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
60e3f09c67 |
feat(vpn): prod egress-gateway group — k3s-prod-3, singleton, opt-in only
`[vpn_egress_gateway_prod]` is a SEPARATE inventory group with its own vaulted credentials, not a second member of `[vpn_egress_gateway]`. That group is the default target of playbooks/vpn.egress.gateway.yml, so adding a prod host to it would mean a flagless `ansible-playbook playbooks/vpn.egress.gateway.yml` silently reconfigures a prod node's kill-switch datapath. Prod is reached only by asking for it, with `--list-hosts` first: -e vpn_egress_gateway_hosts=vpn_egress_gateway_prod --limit k3s-prod-3 Node 3 because node 1's SSD was replaced yesterday (least operational history) and node 2 carries the §0b memattr history. Exactly one node, forever: Cilium OSS picks "the first node in lexical ordering" among nodeSelector matches, so a labelled k3s-prod-1 would silently steal the gateway role — and the public egress IP — from k3s-prod-3, with no event and no alert. vault.yml is a verbatim copy of the dev group's CIPHERTEXT: same PIA account per the operator, and copying the encrypted blob means the plaintext was never decrypted to disk, through a shell, or into a transcript. The two files are now independent — rotating means re-encrypting both, which is the right behaviour for two environments. Also corrects a stale inventory note that claimed k3s-prod-3 has wlp1s0 up on 192.168.2.195. Re-verified before choosing it as the gateway, because a second live uplink in a kill-switch datapath is not a footnote: there is no wl* netdev on the node at all, no phy80211 device, the /etc/network/interfaces wlp1s0 stanza is commented out, 192.168.2.195 is assigned nowhere, and the only IPv4 addresses are lo and eno1 192.168.2.12. Nothing needed bringing down. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
6f698f59af |
fix(vpn): Cilium never re-resolves tun0 — the gateway dies on every reconnect
Measured on k3s-dev-3, not reasoned about. Three findings, one of which had the dev gateway silently dead for ~80 minutes before this change: 1. Cilium caches (egress IP, egress ifindex) when it first resolves the CEGP's `interface: tun0` and does NOT re-resolve when tun0 changes. Every tunnel restart re-creates tun0 with a NEW ifindex, so vpn-class egress is blackholed from then on. Observed: node had tun0 at ifindex 1987 while `cilium-dbg bpf egress list` still said 1986; pod curl timed out. Forcing a re-apply moved the map to 1987 and egress recovered instantly. `egress-gateway-reconciliation- trigger-interval: 1s` does NOT cover netlink link events — dev has that same 1s setting and still did not self-heal, 20s+ after recovery. Fix: vpn-egress-resteer.sh publishes "<tun0 addr>-<ifindex>" as a node label. A node update makes the gateway re-process the policy (verified: cached ifindex 1986 -> 1987 within 10s). A node label, not an annotation on the policy, because the policy is Flux-managed GitOps and the node's labels are already this role's territory. Fired by the OpenVPN up-script on every connect, plus a 2-minute convergence timer for the boot case where the kube-API is not up yet. Proof: `systemctl stop` then `start` of the tunnel now recovers on its own (map 1989 -> 1990, PIA IP returns); before this commit the identical sequence stayed broken indefinitely. 2. The nft kill-switch CANNOT see the traffic it claims to guard. A counters-only diagnostic table on the gateway node recorded, while a vpn-class pod egressed: 0 packets in forward and 0 in postrouting for both the pod CIDR and the PIA range, against 45166 packets on the same postrouting hook for WAN traffic and 16 packets for a node-originated curl out tun0. Cilium's eBPF datapath bpf_redirect()s these skbs to the egress device without invoking netfilter. So `ip saddr @set oifname != tun0 drop` can never fire for vpn-class pods. What actually fails closed is Cilium's own drop when the cached egress interface is unusable — tcpdump during a tunnel stop AND during a restart showed 0 packets leaving either the WAN or tun0. Every rule now carries a `counter` so the claim stays falsifiable, and every comment that called this table the authoritative vpn-class backstop is corrected rather than left to mislead the next reader. Also removed the `meta mark 0x1c8 oifname != tun0 drop` rule and its variable: nothing stamps that mark (the only Cilium mark on the node is 0x200/0xf00, the L7-proxy rule to table 2004), the traffic never reaches netfilter anyway, and a live rule matching an arbitrary mark is a hazard to whatever picks it next. 3. The up-script flushed the nft source set on every connect, so a packet still sourced from the previous tunnel address matched neither the ip-rule nor the drop rule. The set is now additive (`add element` is idempotent; the down-script already retained it): an element can only ever tighten the guard. Finding 2 means that window could not have leaked POD traffic, but node-originated tunnel traffic does traverse netfilter, and additive is free. Kill-switch reloads no longer disarm the guard either: the .nft file uses `table` + `flush table`, which clears rules but leaves the named set's elements intact, so an Ansible run cannot empty the set mid-flight. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85
|
839f7fed4a | merge: velero works against R2 — plugin pin, NFS volume policy, metrics | ||
|
jakman85andClaude Opus 5
|
2d5171e064 |
feat(velero): scrape the backup controller — three critical alerts could never fire
platform/monitoring/alerts.yaml has shipped VeleroBackupFailure (critical), VeleroBackupPartialFailure and VeleroNoRecentBackup since the observability wave. None of them could ever have fired. The velero chart defaults `metrics.serviceMonitor.enabled: false`, and prod confirms it live: `kubectl -n velero get servicemonitor` returns no resources, so velero_backup_failure_total and velero_backup_last_successful_timestamp were never scraped. A nightly backup could fail — or silently stop running — for weeks with nothing to say so. That is exactly what R-STATE-03 is for, which makes the scrape part of the backup path rather than an observability extra. Both flags verified against chart 12.1.0: `helm template` emits neither object without the monitoring.coreos.com/v1 capability, and emits both PodMonitor and ServiceMonitor with it — so the chart gates on capability detection AND `enabled`, and helm-controller supplies real capabilities from the API server. No additionalLabels are needed: platform/monitoring already sets serviceMonitorSelectorNilUsesHelmValues and podMonitorSelectorNilUsesHelmValues to false, so Prometheus selects every monitor regardless of labels. Independent of the R2/bulk-tier fix in the previous commit; droppable on its own if the PM wants to sequence it separately. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
2e259a808f |
fix(velero): prod backups could not write metadata to R2, and opt-out FSB would have shipped 8.6 TiB
Velero was resumed on prod (live `flux resume`; suspension was never in git) and its BackupStorageLocation validated Available against Cloudflare R2 on the first try — bucket k3s-prod-backup, prefix `velero`, region auto, checksumAlgorithm "". Backups still failed, and a second, unrelated hazard was armed. Both are fixed here; both were measured on prod, not reasoned about. 1. velero-plugin-for-aws v1.14.2 cannot write to R2 at all. It sets PutObject's `Tagging` field unconditionally, so the SDK emits an empty `x-amz-tagging` header on every PUT. R2 does not implement object tagging in any form and answers HTTP 501 NotImplemented. Two separate Backups reproduced it on the write of velero/backups/<name>/velero-backup.json: kopia uploaded the volume data fine (it uses its own S3 client), then the backup went phase=Failed with no metadata object — i.e. unrestorable. No config avoids it; `config.tagging` with a real value sends a tag set R2 also rejects. Upstream PR #309 makes the field conditional and landed on release-1.14 after v1.14.2 was cut, so v1.14.3-rc.2 is the earliest build with the fix. Pinned to it, with the exit condition (v1.14.3 GA) stated at the pin. 2. The opt-out FSB schedule would have uploaded the NFS bulk tier. Schedule (1) runs defaultVolumesToFsBackup:true and excludes only monitoring and unifi. Since 2026-09-11 prod also carries four static NFS PVs — plex-media, sonarr-media and radarr-media all bound to the SAME export /mnt/Storage/plex (8.32 TiB measured via zfs list), plus nextcloud-legacy-archive at 270 GiB. The 03:00 run would have read that library three times over NFS and pushed ~8.6 TiB to R2 nightly, retained 720h. Namespace exclusion cannot express the fix: those four namespaces also hold real Longhorn PVCs (plex/sonarr/radarr config, nextcloud-data) whose loss is unrecoverable. So the opt-out is now per VOLUME, by SOURCE TYPE: a velero volume policy (ConfigMap velero-volume-policies) skips any volume whose source is NFS, and schedule (1) references it. That tests the property that makes a volume bulk-tier (R-STATE-04: the bulk tier IS the NFS export) instead of a name list the next PV would slip past. The per-pod backup-volumes-excludes annotation was rejected for failing OPEN — a new NFS mount would be backed up in full until someone remembered. PROVEN on prod (velero 1.18.1 / chart 12.1.0): a Backup of ns nextcloud with defaultVolumesToFsBackup:true plus this policy produced exactly ONE PodVolumeBackup — `data` (nextcloud-data, Longhorn, 875,417,102 bytes, Completed). The NFS `legacy-archive` volume produced none. Residual gap, stated rather than hidden: the rule matches NFS only. A future bulk volume on another out-of-cluster source needs its own condition. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85
|
3ec67bafdd | merge: platform-admins may reach the media app UIs | ||
|
jakman85andClaude Opus 5
|
5da116b34d |
fix(oauth2-proxy): platform-admins may reach the media UIs — the immediate 403
The four forward-auth media UIs (jackett, qbittorrent, radarr, sonarr) gate on `--allowed-group=media-users` alone. On prod the `homelab` realm has exactly one user — the operator's `jakman85` — and it is a member of `platform-admins` ONLY. `media-users` has zero members, so those four hosts were reachable by nobody: oauth2-proxy completed OIDC discovery, redirected to Keycloak, got a token whose `groups` claim is `["platform-admins"]`, found no allowed group in it, and answered 403. No login form appeared because the browser already held a Keycloak SSO session from a platform-admins login — hence "403 immediately". pihole and crafty were unaffected: they already gate on platform-admins. `--allowed-group` is repeatable and OR-ed, so listing both groups means "media consumers OR platform operators". This grants no real privilege — platform-admins already maps to cluster-admin via k8s-oidc-rbac.yaml (oidc:platform-admins), so a member can already exec into these pods — and it keeps media-users meaningful for non-admin household accounts. Ruled out while diagnosing: client-secret drift (all 7 sidecar secrets hash-match keycloak-realm-clients), stale apex URLs (every live sidecar carries keycloak.prod.home.keithjackson.dev), missing group mappers (all 7 clients emit claim=groups, full.path=false), and the central oauth2-proxy pod restarts — those were Keycloak returning 503 "no healthy upstream" to OIDC discovery at startup, a consequence of the Keycloak roll, not a cause. Goldens re-rendered with the canonical command: python3 catalog/render.py --all catalog -o apps --wave-layout --no-image-automation R-IDP-06 Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
6b953cc56b |
fix(arrs): the config PVC was mounted where the app never looks
sonarr, radarr, jackett and qbittorrent all mounted their Longhorn config PVC at the renderer's default /data/config, but every one of these images runs with `-data=/config`. So the PVC held nothing but lost+found while the app wrote its entire configuration to the container's EPHEMERAL writable layer — destroyed on every pod recreation: restart, reschedule, image bump. Measured in-cluster before fixing, per app, rather than inferred: /data/config dev=2080 [lost+found] <- the Longhorn PVC /config dev=2053 [Sentry asp config.xml logs ...] <- the node's own disk and a marker file written to /config did not appear in /data/config, so they are demonstrably different storage. qbittorrent's /config sat on dev=66309 (/dev/nvme0n1p5), i.e. whichever node it happened to land on. This is the SAME failure catalog/plex.yaml:54 already records having fixed for Plex; plex was the only one of the five that was right. The live /config contents were copied onto each PVC BEFORE this landed, so jackett's API key and qbittorrent's credentials — which other apps reference — survive the move rather than being regenerated. catalog/sonarr.yaml:61 documented this as a latent bug and deliberately left it because it changes live on-disk state. It is being fixed now because all four pods had just been recreated, so their configs were freshly generated and nothing had accumulated to lose. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85
|
f5e62d9169 | merge: bulk NFS volumes for plex, sonarr, radarr and nextcloud | ||
|
jakman85andClaude Opus 5
|
daac05e7e8 |
feat(bulk): prod mounts the NFS export through pfSense's WAN address
The operator added the pfSense port-forward, so BULK_NFS_SERVER is no longer a placeholder. Prod gets 192.168.2.102 (pfSense WAN, DNAT tcp/2049 -> 192.168.1.9); dev stays on the base 192.168.1.9 because it is already on pfSense's LAN. This value could not be left as a placeholder safely: spec.nfs.server is unvalidated by Kubernetes, so the PV would be created, the PVC would BIND, and the failure would only surface as four pods stuck in ContainerCreating. Verified from k3s-prod-1 before committing, deliberately as uid 1000 rather than root (the export carries no_root_squash, so a root write proves nothing, and LSIO images default to PUID 911 which would go Ready and then fail every import EACCES): mount negotiated nfs4 vers=4.1 proto=tcp, write succeeded, and ln() across downloads/ -> tv/ gave link count 2 — real hardlinks, so no silent copy-then-delete. The Nextcloud export was additionally tightened to server-side ro= for prod's three nodes; a write as root is refused. Its content is config/, config_old/ and config_backup/ with no data/ directory, so it is an archive, not a live data store. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85andClaude Opus 5
|
da8a0eac04 |
test(l0): R-STATE-04 gets a real check — bulk storage provably is not the replicated tier
The gate BLOCKED this branch, correctly, and the block was the interesting part.
Attaching the media library selects R-STATE-04 as a touched requirement ("bulk media storage has
a capacity strategy distinct from the replicated tier"), and R-STATE-04 had NO scaffolded test, so
the coverage REQUIRE stage failed both l0 and l1. There were two ways out. One was to keep
avoiding the token — the existing discipline in catalog/plex.yaml and catalog/qbittorrent.yaml,
which say in as many words that naming the requirement would block the merge. That made sense while
the tier was a stub. It does not make sense in the change that DELIVERS the tier: it would mean
shipping the requirement and claiming nothing. So: the check.
WHAT IT ASSERTS, and why each one is a real failure mode rather than a shape
The `bulk` StorageClass sat as `server: REPLACE-ME` for six roadmap phases, and the only thing
keeping a multi-terabyte library off the 3-replica `longhorn` class was four hand-written comments.
That is the class of failure being closed: a bulk volume on the replicated tier does not fail
loudly — Longhorn accepts the PVC and starts replicating 3x of data three mini-PCs cannot hold.
(1) DISTINCTNESS — no bulk PV/PVC on any class the repo declares with the Longhorn provisioner
(derived from platform/longhorn/, so adding a Longhorn class cannot create a blind spot),
and the class is explicitly EMPTY.
(2) CAPACITY STRATEGY as arithmetic — a bulk volume at least an order of magnitude above the
same service's replicated volume. The requirement is about two magnitudes of data; a "bulk"
volume sized like a config PVC means the tier was named, not applied. The 10x floor is
CALIBRATED against the real corpus, not guessed: the media library is ~460x its config
volume and the Nextcloud archive ~13x its 20Gi, so a higher floor would fire on a legitimate
volume and teach the next reader to weaken the check. My first draft used 100x and did
exactly that — the corpus caught it.
(3) PRE-BOUND FROM BOTH ENDS (claimRef + volumeName, agreeing). Guards the most deceptive
failure available in this tier: a dynamic bulk class hands out a FRESH EMPTY directory, the
pod mounts, the PVC Binds, everything is green, and the 8 TiB was never attached.
(4) Retain, always. (5) mountOptions carry `hard` and exactly one nfsvers=4.x, and never `soft`
— a soft mount hands a server hiccup to the app as a short read, which for a media library
is silent corruption; and v4 is what keeps the firewall surface at one port.
(6) ONE EXPORT, AT MOST ONE MOUNT PER WORKLOAD. This is the assertion I most wanted. Splitting
one export into two subPath mounts looks TIGHTER and breaks link() with EXDEV; Sonarr and
Radarr then degrade to copy-then-delete, rewriting every import over NFS and destroying the
seeding copy, surfacing weeks later as "imports are slow and my ratio is gone". No reviewer
sees that in a diff.
(7) READ-ONLY COUPLING — nfs.readOnly, the volumeMount flag and ReadOnlyMany must agree, so
dropping one still leaves the others; and every bulk mode is a `...Many`.
(8) The server is a BARE cluster-vars token, that knob has a base default, and EVERY overlay
supplies it — the seam that lets one authored definition serve two clusters that reach this
host by different addresses.
(9) LOAD-BEARING and NON-VACUOUS. Wired unconditionally into ci/l0.sh as Stage 3e for the same
reason as 3c/3d: Stage 3b scopes to touched requirements, and the path map keys NEITHER
apps/* NOR platform/longhorn/* to this requirement — so the change most likely to break
this could attribute nothing and be gated by nothing. An EMPTY bulk corpus FAILS rather
than passing trivially, and a floor on the assertion count keeps a pass from degenerating.
It reads the COMMITTED apps/ goldens rather than calling the renderer. Asking the renderer would
only prove it agrees with itself; the goldens are what Flux reconciles, and render==golden is
already its own gate stage.
PERTURBED, because a check that has never failed is not evidence. Each of these was applied to the
real tree and each fired with the intended message: bulk PVC moved onto `longhorn`; Retain -> Delete;
`hard` -> `soft`; the token replaced by the literal 192.168.1.9; sonarr's single mount split into
two subPath mounts (assertion 6); and the prod overlay's knob deleted.
Also hardens render.py: `size` is structurally required of a bulk entry (a PV with no capacity is
rejected by the API server) but the JSON Schema only enforces `export`, so omitting it raised a bare
KeyError three frames down. It now raises a sentence naming the service, the volume and the remedy.
Found by the same perturbation pass.
Coverage: 48/51 -> 49/51 (96.1%), 2 gaps, 0 safety-critical.
BASE_REF=main make -C ci gate -> MERGE GATE: PASS.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85
|
cac413e87a |
feat(cnpg): synchronous replication, quorum of 1, dataDurability preferred
Three instances replicating ASYNCHRONOUSLY still lose data on failover: COMMIT returns as soon as the primary has flushed locally, so a primary that dies before its standbys catch up takes the last few transactions with it and the promoted standby comes up quietly missing them. On keycloak-db that is a just-created user, a rotated credential or a consent vanishing at exactly the moment of a failover. `method: any` + `number: 1` makes COMMIT wait for ONE of the two standbys to confirm — the point of having them. dataDurability: preferred, NEVER required. `required` is a strict quorum: fewer than `number` healthy standbys and writes BLOCK. Postgres here shares three nodes with etcd and the CNI, so one degraded standby — a node reboot, a Longhorn replica rebuild, a Cilium restart — would turn a partial degradation into a total write outage, and on the SSO database that takes kubectl OIDC, Grafana, Headlamp, Gitea and forward-auth with it. `preferred` keeps synchronous commit while a healthy standby is there and relaxes the required count dynamically when one is not. dataDurability is only honoured while standbyNamesPre/standbyNamesPost are unset — both are. NON-DISRUPTIVE: this compiles to `synchronous_standby_names`, a reload-only PostgreSQL parameter. No pod restart, no switchover, no client disconnect. It is the last of the three commits because it wants standbys that already exist and are already on their final nodes. Field shape verified against the live clusters.postgresql.cnpg.io CRD before relying on it (CNPG 1.30.0, byte-identical schema on k3s-prod and k3s-dev): spec.postgresql.synchronous requires `method` (enum any|first) and `number` (x-kubernetes-validation self > 0); `dataDurability` is enum required| preferred. None of the three Clusters previously had a `postgresql:` block, so this adds one rather than merging into existing parameters. DEV IMPACT: identical and non-disruptive, same reload-only path. Verified: yamllint clean; both tiers render the block. Co-Authored-By: Claude Opus 5 <[email protected]> (cherry picked from commit f1ce19461415e77eb2f1ca5109ebab49edf0860b) |
||
|
jakman85andClaude Opus 5
|
82aff4d053 |
feat(apps): attach the media library and the legacy Nextcloud dataset over NFS
plex, sonarr, radarr and nextcloud each gain one bulk volume. Authored in the catalog and re-rendered, never hand-edited into apps/ (render-golden: 10/10). Layout, the export change the operator must apply, the uid analysis and the validation probes are in docs/BULK-NFS-STORAGE.md; everything there was measured on the host over read-only SSH, not assumed. WHAT THE LAYOUT TURNED OUT TO BE, AND WHY IT DECIDED THE DESIGN /mnt/Storage/plex holds movies/ tv/ photos/ AND downloads/ as SIBLINGS in one dataset — so the arrs' import source and their libraries are one filesystem on the server, and the download client's completed folders are already named radarr/ and tv-sonarr/. The k3s arrs are joining a tree an arr stack has been driving for a long time. That sibling fact is the whole argument for the arrs mounting the export ROOT rather than a subPath per directory. Sonarr and Radarr import by hardlinking or atomically renaming, both same-filesystem operations, and to the kernel "same filesystem" means SAME MOUNT. Two subPath mounts of one export are two mounts: link() across them returns EXDEV regardless of what the server knows, and the arrs do not fail loudly — they degrade to copy-then-delete, rewriting every file over NFS and destroying the seeding copy. The smallest subtree containing both tv/ and downloads/ IS the export root, so the root mount is the MINIMAL mount that preserves hardlinks. Least privilege bounded below by a hard requirement. The cost is stated, not hidden: sonarr can also write /media/movies. plex /mnt/Storage/plex -> /media ro ReadOnlyMany sonarr /mnt/Storage/plex -> /media rw ReadWriteMany radarr /mnt/Storage/plex -> /media rw ReadWriteMany nextcloud /mnt/Storage/nextcloud -> /mnt/legacy-nextcloud ro ReadOnlyMany (subPath: nextcloud) Plex is read-only because it indexes and streams; every write on that tree belongs to the arrs, and saying so removes Plex from the set of things that can damage 8.33 T. All three media consumers use the SAME mountPath deliberately: when qbittorrent is eventually given this export, the arrs and the download client will already agree on absolute paths, which is the other precondition for hardlinked imports. *** /media AND NOT /data — A COLLISION CAUGHT WHILE RENDERING. *** The arrs' Longhorn config PVC renders at the renderer default /data/config. A media mount at /data is mounted OVER it and MASKS the config volume: the pod comes up with its app database shadowed by an 8 T media tree. That discovery also exposed a SEPARATE PRE-EXISTING BUG, reported and deliberately NOT fixed here: LinuxServer arr images run with -data=/config, so /data/config is very likely the wrong home for that PVC and the app has been writing its EPHEMERAL layer — the exact failure catalog/plex.yaml's mountPath comment records already having been bitten by. Plex was fixed; sonarr, radarr, qbittorrent and jackett were not. Fixing it starts those apps from an empty config volume, so it needs its own change with the operator present. This change does not make it worse. UID/GID — THE FAILURE THIS TIER ALWAYS HAS The export is sec=sys + no_root_squash, so the client's numeric uid passes through verbatim and the server's ownership is the entire access story. The tree is 0755 owned 1000:3000, so ONLY uid 1000 can write it. LinuxServer images default to 911. Without intervention sonarr and radarr would have mounted cleanly, gone Ready, and failed EVERY import with EACCES. And fsGroup cannot fix that — the in-tree NFS plugin does NO ownership management, so podSecurityContext.fsGroup is a no-op on an NFS volume. Reaching for it is how this gets misdiagnosed. So PUID=1000/PGID=3000 are added to both arrs (PGID 3000 keeps what they write group-readable to the live non-k3s consumers of the same export), and fsGroup: 3000 is added for the LONGHORN config PVC only, so changing PUID does not depend on the image re-chowning /config. plex already runs as 1000 and reads a 0755 tree; nextcloud reads as www-data. Neither needs work. NEXTCLOUD IS MOUNTED READ-ONLY, WHICH IS A DEVIATION FROM THE BRIEF — ON EVIDENCE The task said nextcloud writes. The dataset says otherwise: of 270 G, 267 G is config_backup/, the rest is config/ (103 M) and config_old/ (3.4 G). There is NO data/ directory. This is the OLD non-k3s instance's configuration plus a backup blob — an archive — and that instance is STILL LIVE on it (exported rw to 192.168.1.6 and .5, which the operator has said must stay active). Two Nextclouds writing one instance's config directory, each with its own database and therefore its own oc_filecache, is unrecoverable corruption. "Do not grant more than needed" lands on ro, and ro is the trivially reversible choice. If the intent is in fact a MIGRATION, that is a larger and more deliberate change than a mount; the one-line flip is documented. Read-only for nextcloud can additionally be enforced SERVER-side (only nextcloud consumes that dataset from k3s), and the sharenfs value in the doc uses ro= for the k3s clients. The media tree cannot: plex and the arrs may land on any node, so the server sees the same addresses for reader and writers. Plex's ro is therefore a client-side guarantee — stated as a limitation, not left implied. Co-Authored-By: Claude Opus 5 <[email protected]> |
||
|
jakman85
|
e8d8601ca6 |
feat(cnpg): required pod anti-affinity + switchover primary rolls
`instances: 3` alone does not keep the three instances apart. All three Clusters used CNPG's default `podAntiAffinityType: preferred`, which is a scheduler HINT — two instances may share a node whenever that scores better, and they WILL on the path that matters: when CNPG recreates an instance after a node loss, the surviving nodes are the only candidates and one of them already runs an instance. `preferred` is how a 3-instance cluster decays back into the single-node failure domain the previous commit exists to remove. `required` makes it a scheduling constraint. On a 3-node cluster with no spare, the cost is that an instance whose node is gone stays Pending until a node returns. That is correct: a replacement squeezed onto an already-occupied node dies with that node while making the cluster LOOK three-way replicated. 2 of 3 instances still serve and CNPG still promotes. ALSO SETS primaryUpdateMethod: switchover. This is not cosmetic. Changing the affinity changes the instance pod spec, so CNPG performs a rolling update, and the CRD default for primaryUpdateMethod is `restart` (verified against the live CNPG 1.30.0 CRD on both clusters) — a delete-and-recreate of the PRIMARY pod, i.e. tens of seconds of no Postgres. On keycloak-db that is an SSO outage, which also means kubectl OIDC, Grafana, Headlamp, Gitea and forward-auth. With standbys now present, `switchover` promotes an already-updated streaming replica instead, reducing the roll to a connection reset. Known constraint documented in the manifest: under `switchover` the operator rejects an update that changes imageName and a postgresql parameter in the same reconcile. Verified satisfiable before merge (read-only): k3s-prod and k3s-dev each have 3 Ready, schedulable, untainted nodes, and every pgdata PVC already has a Longhorn replica on all three (replica-soft-anti-affinity=false), so any instance can attach from any node. DEV IMPACT: identical, and dev can absorb it. Longhorn dev nodes are 124.9 GiB each with 152.0 GiB already scheduled under a 200% over-provisioning ceiling (249.8 GiB); the six new 5Gi volumes add 30 GiB scheduled per node -> 182.0, still inside the ceiling, and only ~600 MiB per volume is really consumed. Prod is far looser: 239 -> 269 GiB scheduled against a 829 GiB ceiling. THIS IS THE DISRUPTIVE COMMIT of the three. Land it on its own reconcile, after the scale-out has produced two Ready standbys per Cluster, so the blast radius is one clean switchover per database rather than a scale-out and a roll at once. Expect a brief SSO interruption for keycloak-db. Verified: yamllint clean; both tiers render the new fields; field names, types and enum values checked against the live clusters.postgresql.cnpg.io CRD (CNPG 1.30.0, identical on prod and dev). Co-Authored-By: Claude Opus 5 <[email protected]> (cherry picked from commit e1d364238d73e6ee99c9a50108fe8b4e09481a7e) |
||
|
jakman85andClaude Opus 5
|
2590bc4317 |
feat(env): BULK_NFS_SERVER — the one knob prod cannot answer yet, and why it is a placeholder
The bulk tier's PersistentVolumes need a server address, and there is no single correct one: the
two clusters sit on OPPOSITE SIDES of pfSense from the storage host, which has exactly one
interface (vmbr0 192.168.1.9/24, on pfSense's LAN).
dev 192.168.1.40/.41/.42 — the SAME segment. Reaches it directly, and already holds one NFS
export from it (/mnt/Storage/k8s-volumes, in the host's /etc/exports). Proven path, so
base's default is the dev value per this file's existing convention, and dev restates it.
prod 192.168.2.10/.11/.12 — pfSense's WAN. tcp/2049 does not traverse that today; 22 and 8006
answer only because pfSense port-forwards them via 192.168.2.102. Opening the storage path
is a PENDING operator decision whose two candidate outcomes give DIFFERENT values here:
192.168.2.102 (another port-forward) or 192.168.1.9 (a route). So prod holds
TBD-PROD-BULK-NFS-SERVER, this repo's established loud-placeholder convention.
Two findings recorded in the prod overlay because they change what the operator has to do:
* THE EXPORT'S CLIENT LIST IS THE SAME UNDER BOTH OUTCOMES. Measured today from this
workstation (192.168.2.132) through the existing port-forward: the storage host logged the
connection as coming from 192.168.2.132 — a WAN-side address — not from a pfSense LAN address
(`ss -tn` peer 192.168.2.132; the host's only route off-LAN is its default via 192.168.1.1).
pfSense DNATs WITHOUT source NAT, so the NFS server sees prod's REAL node addresses either
way. The `zfs set sharenfs=` work therefore does not have to wait for the routing decision.
* ONE PORT, NOT FOUR. The PVs mount nfsvers=4.1, and NFSv4 carries mount and lock in-protocol —
no rpcbind/111, mountd or statd. Whichever outcome is chosen, it opens tcp/2049 and nothing
else. NFSv3 would have needed four ports, three of them on ephemeral numbers.
*** AND ONE HONEST WEAKNESS, stated in the overlay where an operator will hit it. ***
Unlike the LAN knobs above it, this placeholder does NOT fail at apply time. A PV's
spec.nfs.server is an unvalidated string: the API server accepts it, the PV is created, and the
PVC BINDS (binding is pure control-plane). The failure appears only when a pod mounts —
MountVolume.SetUp "Failed to resolve server TBD-PROD-BULK-NFS-SERVER" — so plex, sonarr, radarr
and nextcloud would sit in ContainerCreating on prod. There is no CRD validation to lean on here,
so the guard has to be procedural: set the value before prod reconciles a revision carrying the
bulk volumes. Dev renders a working value and is where these manifests are meant to be proven.
Related finding, NOT fixed here because the file does not exist on main: the static guard this
convention is supposed to lean on, `bootstrap/standup.sh`'s `s3_is_placeholder` family, is absent
from main (it lives on unmerged prod branches), so
conformance/tests/l0-static/placeholder-guard-coupling exits 3 SKIPPED and nothing in the gate
currently refuses a placeholder-shaped overlay value. When standup.sh lands, its guard needs an
arm for this knob and a consumer that calls it — assertions (2) and (3) of that check then cover
this value automatically, since the detector's SEED vocabulary already matches "TBD".
Evidence: `kubectl kustomize clusters/dev` -> BULK_NFS_SERVER: 192.168.1.9;
`kubectl kustomize clusters/prod` -> BULK_NFS_SERVER: TBD-PROD-BULK-NFS-SERVER. Both exit 0.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85andClaude Opus 5
|
cec550045b |
feat(storage): the bulk tier becomes real — static NFS PVs, authored once per environment
The `bulk` class has existed since Phase 0 as a deliberate stub: the StorageClass named an NFS
CSI driver that is not installed and a server/share of REPLACE-ME, so plex, sonarr, radarr and
qbittorrent all carry a comment saying "attach the library once OQ-2 is resolved". This is that
resolution — for the case that actually exists here, which is NOT the case the stub anticipated.
The stub assumed DYNAMIC provisioning: ask a CSI driver for a bulk volume and get a fresh empty
subdirectory. That is the wrong shape for this platform's bulk data. The media library is 8.33 TiB
that already exists, on ZFS datasets on the Proxmox host, with live non-k3s consumers. Nothing
needs provisioning; existing datasets need ATTACHING. So a bulk storage entry now renders a
STATIC, pre-bound NFS PersistentVolume plus its PVC, and needs no CSI driver at all (the in-tree
NFS volume source is not deprecated and has no CSI migration).
Schema 1.4.0 adds, on a storage entry:
export absolute NFS export path; REQUIRED when class is bulk, FORBIDDEN otherwise (an `if`
in the schema, so a bulk entry cannot be authored without saying what it attaches).
subPath mount a subtree instead of the volume root — any class.
readOnly any class; on bulk it also sets the PV's nfs.readOnly, so the mount really is `ro`.
The SERVER is deliberately NOT a schema field. It is the `${BULK_NFS_SERVER}` cluster-vars knob,
because dev and prod reach the SAME storage host by different addresses and R-ENV-02 says the
service definition is authored once. A ServiceDefinition says WHICH dataset; the overlay says
where the host is.
Three decisions worth the reader's time, argued in full in the r_bulk_pvs docstring:
* PV/PVC, not an inline `nfs:` pod volume. Inline is fewer objects and would work. It cannot
express `persistentVolumeReclaimPolicy: Retain`, which is the one property most worth having
in git for 8.33 TiB of data with consumers outside this cluster; it puts read-only enforcement
one Deployment edit away from silent removal; and it is invisible to `kubectl get pv,pvc`,
which is where an operator looks for attached external storage.
* storageClassName: "" on both ends, NOT the `bulk` StorageClass. Explicitly empty is the
canonical marker for a statically provisioned volume. It also sidesteps a trap: a
StorageClass's `provisioner` is IMMUTABLE, so re-pointing the deployed `bulk` stub would make
Flux fail on that object forever.
* Access mode is always `…Many` and follows the read/write posture — ReadOnlyMany for a reader,
ReadWriteMany for a writer. One export is consumed by several namespaces AND several nodes at
once, which is exactly what ReadWriteOnce cannot express; which `Many` it is then makes the
intent legible in `kubectl get pv`.
mountOptions are a platform decision held in the renderer rather than a per-service field:
nfsvers=4.1,hard,noatime,timeo=600,retrans=2. NFSv4 carries mount and lock in-protocol, so the
only port that must be reachable is tcp/2049 — no rpcbind/111, mountd or statd. That is a
firewall decision as much as a storage one. `hard` over `soft` because a soft mount converts a
server hiccup into a short read handed to the application.
The contract doc records the trap that will otherwise be discovered in production: fsGroup is a
NO-OP on an NFS volume (the in-tree plugin does no ownership management), so a writable bulk mount
requires the container's own uid/gid to suit the export's ownership. A mount that succeeds and
then cannot write is this tier's characteristic failure.
Every pre-existing golden renders byte-identical: the new keys are emitted only when declared, and
`readOnly` defaults to False. render-golden: 10/10. selftest: PASS.
Co-Authored-By: Claude Opus 5 <[email protected]>
|
||
|
jakman85
|
f338e91770 |
feat(cnpg): instances 3 on all three Clusters — a standby to fail over to
All three CNPG Clusters ran `instances: 1`. Longhorn's 3-way replication saves the DATA when a node dies; it does not save the SERVICE — a single instance has to be rescheduled, re-attach its volume and replay WAL before Postgres accepts a connection again. With nothing in the spec keeping them apart, all three primaries had drifted onto ONE node (k3s-prod-2 on prod, k3s-dev-3 on dev). On 2026-09-07 that node took SSO, Nextcloud and Semaphore down together, and with SSO went kubectl OIDC, Grafana, Headlamp, Gitea and forward-auth. Three instances give each Cluster a streaming standby CNPG can promote in seconds, repointing the -rw Service with no volume re-attach and no restore. UNBLOCKED BY WORKING BACKUPS, NOT A SUBSTITUTE FOR THEM. Standbys replicate corruption and deletions faithfully; only the Barman archive is a backup, and adding standbys while archive_mode=on with a failing archive_command would have multiplied the disk-full clock, not hedged it. All three Clusters on both k3s-prod and k3s-dev now report ContinuousArchiving=True with a real firstRecoverabilityPoint (verified read-only, 2026-09-07). Scaling out is non-disruptive on its own: CNPG creates -2 then -3 sequentially, each seeded by pg_basebackup from the RUNNING primary. The primary is not restarted and clients are not disconnected. The anti-affinity change that DOES cause a switchover is deliberately the next commit. DEV IMPACT: identical — dev is on the same shape (three single-instance DBs, all on k3s-dev-3) and gets the same scale-out. Dev has three untainted nodes and Longhorn headroom for it (see the next commit's message for the numbers). Cost: 2 extra 5Gi PVCs per Cluster; ~30 GiB provisioned cluster-wide against live pgdata of ~600 MiB each, on Longhorn with 200% over-provisioning. Verified: yamllint clean; `kubectl kustomize --load-restrictor LoadRestrictionsNone platform-config` and `kubectl kustomize apps/wave-0` both render `instances: 3`. Co-Authored-By: Claude Opus 5 <[email protected]> (cherry picked from commit ed6fe6cb019b96f677a92448a0347f979d1a6d02) |
||
|
jakman85
|
a624c638ef | merge: docs/node-1-drive-replaced | ||
|
jakman85
|
90b39de527 | merge: fix/swap-off-persists-across-reboot | ||
|
jakman85
|
0247d796a3 | merge: fix/founder-moved-to-node-2 | ||
|
jakman85
|
c9e9dcf960 | merge: fix/r-env-03-overlay-selected-credentials | ||
|
jakman85
|
89cf59ffb7 | docs(conformance): the GIVEN/WHEN/THEN header states the exception it now allows | ||
|
jakman85
|
e319777849 |
docs(pm): draft the R-ENV-03 amendment, and name the gate hole that hid it
The requirement's literal reading ("no prod-specific artifact in a shared path")
forbids the environment-selected PAIR that R-ENV-02 prescribes for a value that
must differ per environment while the manifests stay identical — and a Secret's
difference cannot live in cluster-vars, because it is ciphertext in a SOPS file.
Drafted wording that keeps the guard's teeth (an artifact only prod APPLIES
still fails) and removes the false positive, for the System Architect: the spec
repo is read-only here and CI-gated by R-TEST-06.
Also recorded, checked rather than assumed: the merge that turned R-ENV-03 red
was gated with a touched-requirement subset that never selected R-ENV-03, so
ci/l0.sh Stage 3b filtered the already-red check out of the run that printed
PASS. Replaying that delivery's twelve paths through
fix/touched-requirements-fail-closed's requirement-paths.map still yields no
R-ENV-03, so landing that branch would NOT have caught this. The two changes
that would (unconditional whole-repo L0 stages; a changed conformance test
attributing its own requirement labels) are ci/ work and are left to that
branch, not smuggled in here.
|
||
|
jakman85
|
730d12ddc4 |
fix(conformance): R-ENV-03 shared-path rule tests the harm, not the filename
The blanket regex around RENDERED_DIRS failed any tracked file whose name
carries a delimited `prod` token. That caught the four per-environment backup
credential halves (BACKUP_CREDENTIALS_SUFFIX) even though BOTH halves are
applied to BOTH clusters as base resources and the overlay selects only which
one the shared consumer REFERENCES — i.e. exactly the R-ENV-02 contract the
regex exists to protect. Renaming the files to dodge the regex was rejected as
gaming the guard, so the rule now encodes the property instead.
The fix is not an allowlist of those four paths. A prod-token file in a shared
path is excused only when the tree proves all of:
(A) it declares nothing but Secrets whose names end in the environment suffix
(1) its own directory's kustomization applies it, and EVERY environment value
of the selector resolves to a Secret that some resource of that same
kustomization declares, in the same namespace
(2) nothing names the suffixed Secret — or the suffixed file — literally;
every reference is `<base-name>${VAR}`
(3) that VAR is defined for the base and for every overlay, and prod's value
is the one that selects this file
References are read from parsed YAML values, never raw text: the mechanism is
spelled out by name in comments beside the resources, and a comment references
nothing.
No other assertion is weakened; the check still runs 96 assertions, and the
pass output now notes each excused file and why.
|